Пример #1
0
def proc_dis_log(node, param):
    cmd = 'ld'

    try:
        if param == 'debug':
            cmd = 'ld -l DEBUG'
        elif param == 'info':
            cmd = 'ld -l INFO'
        elif param == 'error':
            cmd = 'ld -l ERROR'
        elif param == 'exception':
            cmd = 'log:exception-display'

        nodes_info = get_node_list(node, 'nodename, ip_addr, type')

        res_result = dict()
        for node_name, ip, type in nodes_info:
            if type.upper() == 'ONOS':
                log_crt = SshCommand.onos_ssh_exec(ip, cmd)

                if log_crt is not None:
                    res_result[node_name] = log_crt
                else:
                    res_result[node_name] = 'FAIL'

        return res_result
    except:
        LOG.exception()
        return {'Result': 'FAIL'}
Пример #2
0
def onos_app_check(node):

    app_rt = SshCommand.onos_ssh_exec(node, 'apps -a -s')

    app_active_list = list()
    if app_rt is not None:
        for line in app_rt.splitlines():
            app_active_list.append(line.split(".")[2].split()[0])
        if set(CONF.onos()['app_list']).issubset(app_active_list):
            return 'ok'
        else:
            LOG.error("\'%s\' Application Check Error", node)
            return 'nok'
    else:
        LOG.error("\'%s\' Application Check Error", node)
        return 'nok'
Пример #3
0
def proc_onos_cmd(node, cmd):
    try:
        nodes_info = get_node_list(node, 'ip_addr, type', DB.NODE_INFO_TBL)

        if len(nodes_info) == 0:
            return {'fail': 'This is not a command on the target system.'}

        for ip, type in nodes_info:
            if not type == 'ONOS':
                return {'fail': 'This is not a command on the target system.'}
            else:
                res_result = dict()
                cmd_rt = SshCommand.onos_ssh_exec(ip, cmd)

                if not cmd_rt is None:
                    res_result[node] = str(cmd_rt)
                else:
                    return {'fail': 'Invalid command.'}

                return res_result
    except:
        LOG.exception()
Пример #4
0
def get_node_traffic(conn, db_log, node_name, rx_dic, tx_dic, total_rx, total_tx, err_info, pre_stat):
    try:
        status = 'ok'
        reason_list = []

        pre_total_rx = total_rx
        pre_total_tx = total_tx

        # check minimum packet count
        sql = 'SELECT data_ip FROM ' + DB.OPENSTACK_TBL + ' WHERE nodename = \'' + node_name + '\''
        data_ip = conn.cursor().execute(sql).fetchone()[0]

        sql = 'SELECT ip_addr FROM ' + DB.NODE_INFO_TBL + ' WHERE type = \'ONOS\''
        nodes_info = conn.cursor().execute(sql).fetchall()

        min_rx = 0
        if len(nodes_info) == 0:
            LOG.info('Fail to load onos list')
            status = 'fail'
        else:
            for ip in nodes_info:
                flows_rt = SshCommand.onos_ssh_exec(ip[0], '\"flows --filter \'{tunnelDst=' + data_ip + '}\' --short\"')

                if flows_rt is not None:
                    for line in flows_rt.splitlines():
                        if 'tunnelDst' in line:
                            min_rx = min_rx + int(line.split(',')[2].split('=')[1])
                    break

        if not dict(pre_stat).has_key(node_name + '_VXLAN'):
            status = '-'
            ratio = -1
        else:
            total_rx = total_rx - int(dict(pre_stat)[node_name + '_VXLAN']['total_rx'])
            total_tx = total_tx - int(dict(pre_stat)[node_name + '_VXLAN']['total_tx'])
            cur_min = min_rx - int(dict(pre_stat)[node_name + '_VXLAN']['min_rx'])

            if total_rx == 0 and total_tx == 0:
                ratio = 100
            elif total_tx <= 0 or total_tx < 0:
                LOG.info('Node Traffic Ratio Fail.')
                ratio = 0
            else:
                ratio = float(total_rx) * 100 / total_tx

        LOG.info('Node Traffic Ratio = ' + str(ratio))

        port_json = {'rx': rx_dic[node_name], 'minimum_rx': min_rx, 'rx_drop': err_info['rx_drop'], 'rx_errs': err_info['rx_err'],
                      'tx': tx_dic[node_name], 'tx_drop': err_info['tx_drop'], 'tx_errs': err_info['tx_err']}

        description = ''

        if not status == '-':
            description = 'Ratio of success for all nodes = ' + str(ratio)  + ' (' + str(total_rx) + ' / ' + str(total_tx) + ')'

            if ratio < float(CONF.alarm()['node_traffic_ratio']):
                LOG.info('[NODE TRAFFIC] ratio nok')
                status = 'nok'

            if total_rx < cur_min:
                LOG.info('CUR_MIN_RX = ' + str(cur_min) + ', CUR_RX = ' + str(total_rx) + ', Less than rx minimum.')
                status = 'nok'

            if err_info['rx_drop'] - int(dict(pre_stat)[node_name + '_VXLAN']['rx_drop']) > 0:
                LOG.info('[NODE TRAFFIC] rx_drop nok')
                status = 'nok'

            if err_info['rx_err'] - int(dict(pre_stat)[node_name + '_VXLAN']['rx_err']) > 0:
                LOG.info('[NODE TRAFFIC] rx_err nok')
                status = 'nok'

            if err_info['tx_drop'] - int(dict(pre_stat)[node_name + '_VXLAN']['tx_drop']) > 0:
                LOG.info('[NODE TRAFFIC] tx_drop nok')
                status = 'nok'

            if err_info['tx_err'] - int(dict(pre_stat)[node_name + '_VXLAN']['tx_err']) > 0:
                LOG.info('[NODE TRAFFIC] tx_err nok')
                status = 'nok'

        in_out_dic = dict()
        in_out_dic['total_rx'] = pre_total_rx
        in_out_dic['total_tx'] = pre_total_tx

        in_out_dic['min_rx'] = min_rx

        in_out_dic['rx_drop'] = err_info['rx_drop']
        in_out_dic['rx_err'] = err_info['rx_err']
        in_out_dic['tx_drop'] = err_info['tx_drop']
        in_out_dic['tx_err'] = err_info['tx_err']

        pre_stat[node_name + '_VXLAN'] = in_out_dic
    except:
        LOG.exception()
        status = 'fail'

    vxlan_json = {'port_stat_vxlan': port_json, 'period': CONF.watchdog()['interval'],
                  'ratio': format(ratio, '.2f'), 'current_rx': total_rx, 'current_tx': total_tx,
                  'description': description, 'threshold': CONF.alarm()['node_traffic_ratio'], 'status': status}

    try:
        sql = 'UPDATE ' + DB.OPENSTACK_TBL + \
              ' SET vxlan_traffic = \"' + str(vxlan_json) + '\"' + \
              ' WHERE nodename = \'' + node_name + '\''
        db_log.write_log('----- UPDATE VXLAN STAT INFO -----\n' + sql)

        if DB.sql_execute(sql, conn) != 'SUCCESS':
            db_log.write_log('[FAIL] VXLAN STAT DB Update Fail.')
    except:
        LOG.exception()

    if not status == 'ok':
        reason_list.append(vxlan_json)

    return status, pre_stat, reason_list
Пример #5
0
def get_gw_ratio_compute(conn, db_log, node_ip, node_name, pre_stat):
    status = 'ok'
    reason = []

    try:
        sql = 'SELECT ' + DB.ONOS_TBL + '.nodename, nodelist, ip_addr' + ' FROM ' + DB.ONOS_TBL + \
                ' INNER JOIN ' + DB.NODE_INFO_TBL + ' ON ' + DB.ONOS_TBL + '.nodename = ' + DB.NODE_INFO_TBL + '.nodename'

        nodes_info = conn.cursor().execute(sql).fetchall()

        if len(nodes_info) == 0:
            LOG.info('Fail to load onos list')
            return 'fail', pre_stat, reason

        manage_ip = ''
        hostname = ''
        for nodename, nodelist, ip in nodes_info:
            if not nodelist == 'none':
                for node_info in eval(nodelist):
                    try:
                        if dict(node_info)['management_ip'] == node_ip:
                            manage_ip = ip
                            hostname = dict(node_info)['hostname']
                    except:
                        manage_ip = ''

                    if not manage_ip == '':
                        break
            if not manage_ip == '':
                break

        if hostname == '':
            LOG.info('Can not find hostname')
            return 'fail', pre_stat, reason

        try:
            sql = 'SELECT of_id FROM ' + DB.OPENSTACK_TBL + ' WHERE hostname = \'' + str(hostname) + '\''
            LOG.info(sql)
            node_info = conn.cursor().execute(sql).fetchone()

            of_id = node_info[0]
        except:
            LOG.exception()
            LOG.info('Can not find of_id')
            return 'fail', pre_stat, reason

        group_rt = SshCommand.onos_ssh_exec(manage_ip, 'groups')

        total_cnt = 0
        gw_list = []
        if group_rt is not None:
            for line in group_rt.splitlines():
                if of_id in line:
                    tmp = line.split(',')

                    for col in tmp:
                        if 'packets=' in col:
                            total_cnt = total_cnt + int(col.split('=')[1])
                            gw_list.append(int(col.split('=')[1]))

        str_ratio = ''

        if not dict(pre_stat).has_key(node_name + '_GW'):
            status = '-'
            json_ratio = {'ratio': '-', 'status': status, 'period':CONF.watchdog()['interval'], 'status': status}
        else:
            i = 0
            for gw in gw_list:
                cur_gw = gw - pre_stat[node_name + '_GW']['gw_list'][i]
                cur_total = total_cnt - pre_stat[node_name + '_GW']['gw_total']

                LOG.info('cur_gw = ' + str(cur_gw))
                LOG.info('cur_total = ' + str(cur_total))

                if cur_gw == 0 and cur_total == 0:
                    ratio = 100/len(gw_list)
                elif cur_gw <= 0 or cur_total <= 0:
                    ratio = 0
                else:
                    ratio = float(cur_gw) * 100 / cur_total

                i = i + 1
                str_ratio = str_ratio + str(ratio) + ':'

                if ratio < float(CONF.alarm()['gw_ratio']):
                    status = 'nok'

            json_ratio = {'ratio': str_ratio.rstrip(':'), 'status': status, 'period':CONF.watchdog()['interval'], 'status': status}
            LOG.info('[COMPUTE] ' + 'GW_RATIO = ' + str_ratio.rstrip(':'))

        try:
            sql = 'UPDATE ' + DB.OPENSTACK_TBL + \
                  ' SET gw_ratio = \"' + str(json_ratio) + '\"' + \
                  ' WHERE nodename = \'' + node_name + '\''
            db_log.write_log('----- UPDATE TRAFFIC GW INFO -----\n' + sql)

            if DB.sql_execute(sql, conn) != 'SUCCESS':
                db_log.write_log('[FAIL] TRAFFIC GW DB Update Fail.')
        except:
            LOG.exception()

        in_out_dic = dict()
        in_out_dic['gw_list'] = gw_list
        in_out_dic['gw_total'] = total_cnt

        pre_stat[node_name + '_GW'] = in_out_dic

    except:
        LOG.exception()
        status = 'fail'

    if not status == 'ok':
        reason.append(json_ratio)

    return status, pre_stat, reason
Пример #6
0
def get_gw_ratio_gateway(conn, db_log, node_ip, node_name, rx, gw_rx_sum, pre_stat):
    status = 'ok'
    reason = []

    try:
        sql = 'SELECT ' + DB.ONOS_TBL + '.nodename, nodelist, ip_addr' + ' FROM ' + DB.ONOS_TBL + \
                ' INNER JOIN ' + DB.NODE_INFO_TBL + ' ON ' + DB.ONOS_TBL + '.nodename = ' + DB.NODE_INFO_TBL + '.nodename'

        nodes_info = conn.cursor().execute(sql).fetchall()

        if len(nodes_info) == 0:
            LOG.info('Fail to load onos list')
            return 'fail', pre_stat, reason

        # search data_ip
        data_ip = ''
        manage_ip = ''
        cpt_to_gw_packet = 0
        for nodename, nodelist, ip in nodes_info:
            if not nodelist == 'none':
                for node_info in eval(nodelist):
                    try:
                        if dict(node_info)['management_ip'] == node_ip:
                            manage_ip = ip
                            data_ip = dict(node_info)['data_ip']
                    except:
                        manage_ip = ''

                    if not manage_ip == '':
                        break
            if not manage_ip == '':
                break

        if data_ip == '':
            LOG.info('Can not find data ip')
            return 'fail', pre_stat, reason

        group_rt = SshCommand.onos_ssh_exec(manage_ip, 'groups')

        if group_rt is not None:
            for line in group_rt.splitlines():
                if '{tunnelDst=' + data_ip + '}' in line:
                    tmp = line.split(',')

                    for col in tmp:
                        if 'packets=' in col:
                            cpt_to_gw_packet = cpt_to_gw_packet + int(col.split('=')[1])

        if not dict(pre_stat).has_key(node_name + '_GW'):
            status = '-'
            json_ratio = {'current_rx': '-', 'current_compute_tx': '-', 'current_total': '-',
                          'ratio': '-',
                          'period': CONF.watchdog()['interval'], 'status': status, 'packet_loss': False,
                          'description': ''}
        else:
            cur_rx = rx - int(dict(pre_stat)[node_name + '_GW']['rx'])
            cur_total = gw_rx_sum - int(dict(pre_stat)[node_name + '_GW']['gw_rx_sum'])
            cur_packet = cpt_to_gw_packet - int(dict(pre_stat)[node_name + '_GW']['cpt_to_gw_packet'])

            if cur_rx == 0 and cur_total == 0:
                ratio = 100
            elif cur_rx <= 0 or cur_total < 0:
                ratio = 0
            else:
                ratio = float(cur_rx) * 100 / cur_total

            desc = 'GW RATIO = ' + str(ratio) + ' (' + str(cur_rx) + ' / ' + str(cur_total) + ')'

            loss_flag = False
            if cur_rx < cur_packet:
                LOG.info('GW Ratio Fail. (Data loss)')
                loss_flag = True

            LOG.info('GW Ratio = ' + str(ratio))

            if ratio < float(CONF.alarm()['gw_ratio']) or cur_rx < cur_packet:
                status = 'nok'

            json_ratio = {'current_rx': cur_rx, 'current_compute_tx': cur_packet, 'current_total': cur_total, 'ratio': format(ratio, '.2f'),
                          'period':CONF.watchdog()['interval'], 'status': status, 'packet_loss': loss_flag, 'description': desc}

        try:
            sql = 'UPDATE ' + DB.OPENSTACK_TBL + \
                  ' SET gw_ratio = \"' + str(json_ratio) + '\"' + \
                  ' WHERE nodename = \'' + node_name + '\''
            db_log.write_log('----- UPDATE TRAFFIC GW INFO -----\n' + sql)

            if DB.sql_execute(sql, conn) != 'SUCCESS':
                db_log.write_log('[FAIL] TRAFFIC GW DB Update Fail.')
        except:
            LOG.exception()

        in_out_dic = dict()
        in_out_dic['rx'] = rx
        in_out_dic['gw_rx_sum'] = gw_rx_sum
        in_out_dic['cpt_to_gw_packet'] = cpt_to_gw_packet

        pre_stat[node_name + '_GW'] = in_out_dic
    except:
        LOG.exception()
        status = 'fail'

    if not status == 'ok':
        reason.append(json_ratio)

    return status, pre_stat, reason
Пример #7
0
def onos_rest_check(conn, db_log, node_name, node_ip):
    try:
        web_status = 'ok'

        web_list = []
        fail_reason = []

        web_rt = SshCommand.onos_ssh_exec(node_ip, 'web:list')

        if web_rt is not None:
            for web in CONF.onos()['rest_list']:
                for line in web_rt.splitlines():
                    if line.startswith('ID') or line.startswith('--'):
                        continue

                    if ' ' + web + ' ' in line:
                        if not ('Active' in line and 'Deployed' in line):
                            rest_json = {
                                'name': web,
                                'status': 'nok',
                                'monitor_item': True
                            }
                            fail_reason.append(rest_json)
                            web_status = 'nok'
                        else:
                            rest_json = {
                                'name': web,
                                'status': 'ok',
                                'monitor_item': True
                            }

                        web_list.append(rest_json)

            for line in web_rt.splitlines():
                if line.startswith('ID') or line.startswith('--'):
                    continue

                name = " ".join(line.split()).split(' ')[10]

                if not name in CONF.onos()['rest_list']:
                    if not ('Active' in line and 'Deployed' in line):
                        rest_json = {
                            'name': name,
                            'status': 'nok',
                            'monitor_item': False
                        }
                    else:
                        rest_json = {
                            'name': name,
                            'status': 'ok',
                            'monitor_item': False
                        }

                    web_list.append(rest_json)
        else:
            LOG.error("\'%s\' ONOS Rest Check Error", node_ip)
            web_status = 'fail'
            web_list = 'fail'

        try:
            sql = 'UPDATE ' + DB.ONOS_TBL + \
                  ' SET weblist = \"' + str(web_list) + '\"' +\
                  ' WHERE nodename = \'' + node_name + '\''
            db_log.write_log('----- UPDATE ONOS REST INFO -----\n' + sql)

            if DB.sql_execute(sql, conn) != 'SUCCESS':
                db_log.write_log('[FAIL] ONOS REST DB Update Fail.')
        except:
            LOG.exception()

    except:
        LOG.exception()
        web_status = 'fail'

    return web_status, fail_reason
Пример #8
0
def onos_app_check(conn, db_log, node_name, node_ip):
    try:
        app_rt = SshCommand.onos_ssh_exec(node_ip, 'apps -a -s')

        status = 'ok'
        app_active_list = list()

        app_list = []
        fail_reason = []

        if app_rt is not None:
            for line in app_rt.splitlines():
                app_active_list.append(line.split(".")[2].split()[0])

            if not 'cpman' in app_active_list:
                # activate cpman
                LOG.info('Cpman does not exist. Activate cpman')
                SshCommand.onos_ssh_exec(node_ip,
                                         'app activate org.onosproject.cpman')

            for app in CONF.onos()['app_list']:
                if app in app_active_list:
                    app_json = {
                        'name': app,
                        'status': 'ok',
                        'monitor_item': True
                    }
                    app_active_list.remove(app)
                else:
                    status = 'nok'
                    app_json = {
                        'name': app,
                        'status': 'nok',
                        'monitor_item': True
                    }
                    fail_reason.append(app_json)
                app_list.append(app_json)

            for app in app_active_list:
                app_json = {'name': app, 'status': 'ok', 'monitor_item': False}
                app_list.append(app_json)
        else:
            LOG.error("\'%s\' ONOS Application Check Error", node_ip)
            status = 'fail'
            app_list = 'fail'

        try:
            sql = 'UPDATE ' + DB.ONOS_TBL + \
                  ' SET applist = \"' + str(app_list) + '\"' +\
                  ' WHERE nodename = \'' + node_name + '\''
            db_log.write_log('----- UPDATE ONOS APP INFO -----\n' + sql)

            if DB.sql_execute(sql, conn) != 'SUCCESS':
                db_log.write_log('[FAIL] ONOS APP DB Update Fail.')
        except:
            LOG.exception()
    except:
        LOG.exception()
        status = 'fail'

    return status, fail_reason
Пример #9
0
def controller_traffic_check(conn, db_log, node_name, node_ip, pre_stat):
    try:
        summary_rt = SshCommand.onos_ssh_exec(node_ip, 'summary')

        in_packet = 0
        out_packet = 0

        cpman_stat_list = list()
        controller_traffic = 'ok'
        reason = []

        desc = ''
        ratio = 0

        if summary_rt is not None:
            data_ip = str(summary_rt).split(',')[0].split('=')[1]

            try:
                sql = 'SELECT hostname, of_id FROM ' + DB.OPENSTACK_TBL
                nodes_info = conn.cursor().execute(sql).fetchall()

                for hostname, of_id in nodes_info:
                    cmd = 'cpman-stats-list ' + data_ip + ' control_message ' + of_id

                    stat_rt = SshCommand.onos_ssh_exec(node_ip, cmd)

                    rest_json = {
                        'hostname': str(hostname),
                        'of_id': str(of_id),
                        'inbound': '-',
                        'outbound': '-',
                        'mod': '-',
                        'removed': '-',
                        'request': '-',
                        'reply': '-'
                    }

                    if stat_rt is not None:
                        if not str(stat_rt).startswith('Failed'):
                            for line in stat_rt.splitlines():
                                type = line.split(',')[0].split('=')[1]
                                avg_cnt = int(line.split(',')[2].split('=')[1])

                                if type == 'INBOUND_PACKET':
                                    in_packet = in_packet + avg_cnt
                                    in_p = avg_cnt
                                elif type == 'OUTBOUND_PACKET':
                                    out_packet = out_packet + avg_cnt
                                    out_p = avg_cnt
                                elif type == 'FLOW_MOD_PACKET':
                                    mod_p = avg_cnt
                                elif type == 'FLOW_REMOVED_PACKET':
                                    remove_p = avg_cnt
                                elif type == 'REQUEST_PACKET':
                                    req_p = avg_cnt
                                elif type == 'REPLY_PACKET':
                                    res_p = avg_cnt

                            rest_json = {
                                'hostname': str(hostname),
                                'of_id': str(of_id),
                                'inbound': in_p,
                                'outbound': out_p,
                                'mod': mod_p,
                                'removed': remove_p,
                                'request': req_p,
                                'reply': res_p
                            }
                        else:
                            reason.append(rest_json)
                            controller_traffic = 'fail'
                    else:
                        reason.append(rest_json)
                        controller_traffic = 'fail'

                    cpman_stat_list.append(rest_json)

                for_save_in = in_packet
                for_save_out = out_packet

                if not dict(pre_stat).has_key(node_name):
                    controller_traffic = '-'

                    in_out_dic = dict()
                    in_out_dic['in_packet'] = for_save_in
                    in_out_dic['out_packet'] = for_save_out

                    pre_stat[node_name] = in_out_dic
                else:
                    in_packet = in_packet - int(
                        dict(pre_stat)[node_name]['in_packet'])
                    out_packet = out_packet - int(
                        dict(pre_stat)[node_name]['out_packet'])

                    if in_packet <= CONF.alarm(
                    )['controller_traffic_minimum_inbound']:
                        desc = 'Minimum increment for status check = ' + str(
                            CONF.alarm()['controller_traffic_minimum_inbound'])
                        controller_traffic = '-'
                    else:
                        if in_packet == 0 and out_packet == 0:
                            ratio = 100
                        elif in_packet <= 0 or out_packet < 0:
                            LOG.info('Controller Traffic Ratio Fail.')
                            ratio = 0
                        else:
                            ratio = float(out_packet) * 100 / in_packet

                        LOG.info('[CPMAN][' + node_name +
                                 '] Controller Traffic Ratio = ' + str(ratio) +
                                 '(' + str(out_packet) + '/' + str(in_packet) +
                                 ')')
                        desc = 'Controller Traffic Ratio = ' + str(
                            ratio) + '(' + str(out_packet) + '/' + str(
                                in_packet) + ')\n'

                        if ratio < float(
                                CONF.alarm()['controller_traffic_ratio']):
                            controller_traffic = 'nok'

                        in_out_dic = dict()
                        in_out_dic['in_packet'] = for_save_in
                        in_out_dic['out_packet'] = for_save_out

                        pre_stat[node_name] = in_out_dic
            except:
                LOG.exception()
                controller_traffic = 'fail'
        else:
            controller_traffic = 'fail'

        controller_json = {
            'status':
            controller_traffic,
            'stat_list':
            cpman_stat_list,
            'minimum_inbound_packet':
            CONF.alarm()['controller_traffic_minimum_inbound'],
            'current_inbound_packet':
            in_packet,
            'current_outbound_packet':
            out_packet,
            'period':
            CONF.watchdog()['interval'],
            'ratio':
            format(ratio, '.2f'),
            'description':
            desc,
            'threshold':
            CONF.alarm()['controller_traffic_ratio']
        }

        if not controller_traffic == 'ok':
            reason.append(controller_json)

        try:
            sql = 'UPDATE ' + DB.ONOS_TBL + \
                  ' SET traffic_stat = \"' + str(controller_json) + '\"' + \
                  ' WHERE nodename = \'' + node_name + '\''
            db_log.write_log('----- UPDATE CONTROLLER TRAFFIC INFO -----\n' +
                             sql)

            if DB.sql_execute(sql, conn) != 'SUCCESS':
                db_log.write_log('[FAIL] CONTROLLER TRAFFIC Update Fail.')
        except:
            LOG.exception()
    except:
        LOG.exception()
        controller_traffic = 'fail'

    return controller_traffic, pre_stat, reason
Пример #10
0
def onos_node_check(conn, db_log, node_name, node_ip):
    try:
        node_rt = SshCommand.onos_ssh_exec(node_ip, 'openstack-nodes')

        node_list = []
        port_list = []

        fail_reason = []
        ip_list = []

        node_status = 'ok'

        if node_rt is not None:
            for ip in CONF.openstack()['compute_list'] + CONF.openstack(
            )['gateway_list']:
                ip = str(ip).split(':')[1]

                find_flag = False

                for line in node_rt.splitlines():
                    if (not (line.startswith('Total')
                             or line.startswith('Hostname'))
                        ) and ' ' + ip + ' ' in line:
                        find_flag = True
                        fail_flag = False
                        new_line = " ".join(line.split())

                        tmp = new_line.split(' ')
                        host_name = tmp[0]
                        node_type = tmp[1]
                        of_id = tmp[2]

                        if not 'COMPLETE' in line:
                            node_status = 'nok'
                            fail_flag = True

                        try:
                            sql = 'SELECT nodename FROM ' + DB.NODE_INFO_TBL + ' WHERE ip_addr = \'' + ip + '\''
                            openstack_nodename = conn.cursor().execute(
                                sql).fetchone()[0]

                            if tmp[3].startswith('of:'):
                                manage_ip = tmp[4]
                                data_ip = tmp[5]
                                state = tmp[6]
                            else:
                                manage_ip = tmp[3]
                                data_ip = tmp[4]
                                state = tmp[5]

                            sql = 'UPDATE ' + DB.OPENSTACK_TBL + \
                                  ' SET data_ip = \'' + data_ip + '\',' + \
                                  ' hostname = \'' + host_name + '\',' + \
                                  ' of_id = \'' + of_id + '\'' + \
                                  ' WHERE nodename = \'' + openstack_nodename + '\''
                            db_log.write_log(
                                '----- UPDATE OPENSTACK INFO -----\n' + sql)

                            if DB.sql_execute(sql, conn) != 'SUCCESS':
                                db_log.write_log(
                                    '[FAIL] OPENSTACK DATA IP Update Fail.')
                        except:
                            LOG.exception()

                        port_rt = SshCommand.onos_ssh_exec(
                            node_ip, 'openstack-node-check ' + host_name)

                        host_port_list = []
                        port_status = 'ok'
                        if port_rt is not None:
                            for port_line in port_rt.splitlines():
                                if port_line.startswith(
                                        '[') or port_line.strip() == '':
                                    continue

                                tmp = port_line.split(' ')

                                if not port_line.startswith('OK'):
                                    rest_json = {
                                        'port_name': tmp[1].split('=')[0],
                                        'status': 'nok'
                                    }
                                    fail_flag = True
                                    port_status = 'nok'
                                    node_status = 'nok'
                                else:
                                    rest_json = {
                                        'port_name': tmp[1].split('=')[0],
                                        'status': 'ok'
                                    }

                                host_port_list.append(rest_json)
                        else:
                            node_status = 'nok'
                            port_status = 'nok'

                        port_json = {
                            'hostname': host_name,
                            'port_list': host_port_list
                        }
                        port_list.append(port_json)

                        rest_json = {
                            'hostname': host_name,
                            'type': node_type,
                            'of_id': of_id,
                            'management_ip': manage_ip,
                            'data_ip': data_ip,
                            'state': state,
                            'port_status': port_status,
                            'monitor_item': True
                        }
                        node_list.append(rest_json)
                        ip_list.append(manage_ip)

                        if fail_flag:
                            fail_reason.append(rest_json)

                if not find_flag:
                    rest_json = {
                        'hostname': '-',
                        'type': '-',
                        'of_id': '-',
                        'port_status': 'nok',
                        'management_ip': ip,
                        'data_ip': '-',
                        'state': 'NO_EXIST',
                        'monitor_item': True
                    }
                    node_list.append(rest_json)
                    node_status = 'nok'
                    fail_reason.append(rest_json)

            for line in node_rt.splitlines():
                if not (line.startswith('Total')
                        or line.startswith('Hostname')):
                    new_line = " ".join(line.split())
                    tmp = new_line.split(' ')

                    if tmp[3].startswith('of:'):
                        manage_ip = tmp[4]
                        data_ip = tmp[5]
                        state = tmp[6]
                    else:
                        manage_ip = tmp[3]
                        data_ip = tmp[4]
                        state = tmp[5]

                    if not manage_ip in ip_list:
                        rest_json = {
                            'hostname': tmp[0],
                            'type': tmp[1],
                            'of_id': tmp[2],
                            'management_ip': manage_ip,
                            'data_ip': data_ip,
                            'state': state,
                            'monitor_item': False
                        }
                        node_list.append(rest_json)
        else:
            LOG.error("\'%s\' ONOS Node Check Error", node_ip)
            node_status = 'fail'
            node_list = 'fail'

        try:
            sql = 'UPDATE ' + DB.ONOS_TBL + \
                  ' SET nodelist = \"' + str(node_list) + '\",' + \
                  ' port = \"' + str(port_list) + '\"' \
                  ' WHERE nodename = \'' + node_name + '\''
            db_log.write_log('----- UPDATE ONOS NODE INFO -----\n' + sql)

            if DB.sql_execute(sql, conn) != 'SUCCESS':
                db_log.write_log('[FAIL] ONOS NODE Update Fail.')
        except:
            LOG.exception()
    except:
        LOG.exception()
        node_status = 'fail'

    return node_status, fail_reason
Пример #11
0
def onos_conn_check(conn, db_log, node_name, node_ip):
    try:
        device_rt = SshCommand.onos_ssh_exec(node_ip, 'devices')
        nodes_rt = SshCommand.onos_ssh_exec(node_ip, 'nodes')

        of_status = 'ok'

        of_list = []
        of_fail_reason = []

        cluster_list = []
        cluster_fail_reason = []

        find_list = []
        if device_rt is not None:
            try:
                sql = 'SELECT hostname, of_id FROM ' + DB.OPENSTACK_TBL
                nodes_info = conn.cursor().execute(sql).fetchall()

                for hostname, switch_id in nodes_info:
                    for line in device_rt.splitlines():
                        if line.startswith('id=of'):
                            find_list.append(switch_id)

                            of_id = line.split(',')[0].split('=')[1]
                            available = line.split(',')[1].split('=')[1]

                            if switch_id == of_id:
                                rest_json = parse_openflow(
                                    line, str(hostname), True)

                                if not available == 'true':
                                    of_status = 'nok'
                                    of_fail_reason.append(rest_json)

                                of_list.append(rest_json)

                for line in device_rt.splitlines():
                    if line.startswith('id=of'):
                        of_id = line.split(',')[0].split('=')[1]

                        if not of_id in find_list:
                            rest_json = parse_openflow(line, '', False)
                            of_list.append(rest_json)

            except:
                LOG.exception()
                LOG.error("\'%s\' Connection Check Error(devices)", node_ip)
                of_status = 'fail'
        else:
            LOG.error("\'%s\' Connection Check Error(devices)", node_ip)
            of_status = 'fail'

        cluster_status = 'ok'
        if nodes_rt is not None:
            try:
                sql = 'SELECT ip_addr FROM ' + DB.NODE_INFO_TBL + ' WHERE type = \'ONOS\''
                nodes_info = conn.cursor().execute(sql).fetchall()

                cluster_ip_list = list()

                for onos_ip in nodes_info:
                    find_flag = False
                    summary_rt = SshCommand.onos_ssh_exec(
                        onos_ip[0], 'summary')
                    if summary_rt is not None:
                        data_ip = str(summary_rt).split(',')[0].split('=')[1]

                        for line in nodes_rt.splitlines():
                            id = line.split(',')[0].split('=')[1]
                            address = line.split(',')[1].split('=')[1]
                            state = line.split(',')[2].split('=')[1].split(
                                ' ')[0]

                            if data_ip == address.split(':')[0]:
                                find_flag = True
                                cluster_ip_list.append(address)

                                rest_json = {
                                    'id': id,
                                    'address': address,
                                    'status': 'ok',
                                    'monitor_item': True
                                }
                                cluster_list.append(rest_json)

                                if not state == 'READY':
                                    cluster_status = 'nok'
                                    cluster_fail_reason.append(rest_json)

                        if not find_flag:
                            rest_json = {
                                'id': data_ip,
                                'address': '-',
                                'status': 'nok',
                                'monitor_item': True
                            }
                            cluster_list.append(rest_json)
                            cluster_status = 'nok'
                            cluster_fail_reason.append(rest_json)
                    else:
                        rest_json = {
                            'id': onos_ip,
                            'address': '-',
                            'status': 'nok',
                            'monitor_item': True
                        }
                        cluster_list.append(rest_json)

                if summary_rt is not None:
                    for line in nodes_rt.splitlines():
                        id = line.split(',')[0].split('=')[1]
                        address = line.split(',')[1].split('=')[1]
                        state = line.split(',')[2].split('=')[1].split(' ')[0]

                        if not state == 'READY':
                            status = 'nok'
                        else:
                            status = 'ok'

                        if not address in cluster_ip_list:
                            rest_json = {
                                'id': id,
                                'address': address,
                                'status': status,
                                'monitor_item': True
                            }
                            cluster_list.append(rest_json)
            except:
                pass
        else:
            LOG.error("\'%s\' Connection Check Error(nodes)", node_ip)
            cluster_status = 'fail'

        try:
            sql = 'UPDATE ' + DB.ONOS_TBL + \
                  ' SET openflow = \"' + str(of_list) + '\",' + \
                  ' cluster = \"' + str(cluster_list) + '\"' \
                  ' WHERE nodename = \'' + node_name + '\''
            db_log.write_log('----- UPDATE ONOS CONNECTION INFO -----\n' + sql)

            if DB.sql_execute(sql, conn) != 'SUCCESS':
                db_log.write_log('[FAIL] ONOS CONNECTION DB Update Fail.')
        except:
            LOG.exception()
    except:
        LOG.exception()
        of_status = 'fail'
        cluster_status = 'fail'

    return of_status, cluster_status, of_fail_reason, cluster_fail_reason