def setupFax(self):
QApplication.setOverrideCursor(QApplication.waitCursor)
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = \
device.parseDeviceURI(self.device_uri)
norm_model = models.normalizeModelName(model).lower()
fax_ppd,fax_ppd_name, nick = cups.getFaxPPDFile(self.mq, norm_model)
# Fax ppd not found
if not fax_ppd:
QApplication.restoreOverrideCursor()
log.error("Fax PPD file not found.")
if QMessageBox.warning(self, self.__tr("Unable to find HP fax PPD file."),
self.__tr("The PPD file (%1.ppd) needed to setup the fax queue was not found.").arg(fax_ppd_name),
self.__tr("Browse to file..."), # button 0
self.__tr("Quit") # button 1
) == 0: # Browse
while True:
ppd_dir = sys_conf.get('dirs', 'ppd')
fax_ppd = unicode(QFileDialog.getOpenFileName(ppd_dir,
"HP Fax PPD Files (*.ppd *.ppd.gz);;All Files (*)", self,
"open file dialog", "Choose the fax PPD file"))
if not fax_ppd: # user hit cancel
return
if os.path.exists(fax_ppd):
n = cups.getPPDDescription(fax_ppd)
if n == nick:
break
else:
self.FailureUI(self.__tr("<b>Incorrect fax PPD file.</b><p>The fax PPD file must have a nickname of '%1', not '%1'.").arg(nick).arg(n))
else:
self.FailureUI(self.__tr("<b>File not found.</b><p>hp-setup cannot find the file %1").arg(fax_ppd))
else: # Quit
return
cups.setPasswordPrompt("You do not have permission to add a fax device.")
if not os.path.exists(fax_ppd):
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, '', fax_ppd, self.fax_desc)
else:
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, fax_ppd, '', self.fax_desc)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
if self.fax_uri not in self.installed_fax_devices or \
self.fax_name not in self.installed_fax_devices[self.fax_uri]:
self.FailureUI(self.__tr("<b>Fax queue setup failed.</b><p>Please restart CUPS and try again."))
else:
# sending Event to add this device in hp-systray
utils.sendEvent(EVENT_CUPS_QUEUES_CHANGED,self.fax_uri, self.fax_name)
QApplication.restoreOverrideCursor()
def setupPrinter(self):
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
try:
cups.setPasswordPrompt("You do not have permission to add a printer.")
if not os.path.exists(self.print_ppd[0]): # assume foomatic: or some such
status, status_str = cups.addPrinter(self.printer_name.encode('utf8'), self.device_uri,
self.print_location, '', self.print_ppd[0], self.print_desc)
else:
status, status_str = cups.addPrinter(self.printer_name.encode('utf8'), self.device_uri,
self.print_location, self.print_ppd[0], '', self.print_desc)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
log.debug(self.installed_print_devices)
if self.device_uri not in self.installed_print_devices or \
self.printer_name not in self.installed_print_devices[self.device_uri]:
QApplication.restoreOverrideCursor()
if os.geteuid!=0 and utils.addgroup()!=[]:
FailureUI(self, self.__tr("<b>Printer queue setup failed. Could not connect to CUPS Server</b><p>Is user added to %s group(s)" %utils.list_to_string(utils.addgroup())))
else:
# TODO:
#service.sendEvent(self.hpssd_sock, EVENT_CUPS_QUEUES_CHANGED, device_uri=self.device_uri)
pass
finally:
QApplication.restoreOverrideCursor()
def setDefaultFaxName(self):
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
self.fax_uri = self.device_uri.replace('hp:', 'hpfax:')
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.fax_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
fax_name = default_model + "_fax"
installed_fax_names = device.getSupportedCUPSPrinterNames(['hpfax'])
# Check for duplicate names
if (self.fax_uri in self.installed_fax_devices and fax_name in self.installed_fax_devices[self.fax_uri]) \
or (fax_name in installed_fax_names):
#if fax_name in self.installed_queues or fax_name == self.printer_name:
i = 2
while True:
t = fax_name + "_%d" % i
if (t not in installed_fax_names) and (self.fax_uri not in self.installed_fax_devices or t not in self.installed_fax_devices[self.fax_uri]):
fax_name += "_%d" % i
break
i += 1
self.fax_name_ok = True
self.faxNameLineEdit.setText(fax_name)
self.faxNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultFaxNamePushButton.setEnabled(False)
self.fax_name = fax_name
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
#self.installed_print_devices = device.getSupportedCUPSDevices('*')
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
printer_name = default_model
installed_printer_names = device.getSupportedCUPSPrinterNames(['hp'])
# Check for duplicate names
if (self.device_uri in self.installed_print_devices and printer_name in self.installed_print_devices[self.device_uri]) \
or (printer_name in installed_printer_names):
i = 2
while True:
t = printer_name + "_%d" % i
if (t not in installed_printer_names) and (self.device_uri not in self.installed_print_devices or t not in self.installed_print_devices[self.device_uri]):
printer_name += "_%d" % i
break
i += 1
self.printer_name_ok = True
self.printerNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printerNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultPrinterNamePushButton.setEnabled(False)
self.printer_name = printer_name
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
#self.installed_print_devices = device.getSupportedCUPSDevices('*')
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
printer_name = default_model
# Check for duplicate names
if self.device_uri in self.installed_print_devices and \
printer_name in self.installed_print_devices[self.device_uri]:
i = 2
while True:
t = printer_name + "_%d" % i
if t not in self.installed_print_devices[self.device_uri]:
printer_name += "_%d" % i
break
i += 1
self.printer_name_ok = True
self.printerNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printerNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultPrinterNamePushButton.setEnabled(False)
self.printer_name = printer_name
def setupPrinter(self):
QApplication.setOverrideCursor(QApplication.waitCursor)
cups.setPasswordPrompt("You do not have permission to add a printer.")
#if self.ppd_file.startswith("foomatic:"):
if not os.path.exists(self.ppd_file): # assume foomatic: or some such
status, status_str = cups.addPrinter(self.printer_name.encode('utf8'), self.device_uri,
self.location, '', self.ppd_file, self.desc)
else:
status, status_str = cups.addPrinter(self.printer_name.encode('utf8'), self.device_uri,
self.location, self.ppd_file, '', self.desc)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
log.debug(self.installed_print_devices)
if self.device_uri not in self.installed_print_devices or \
self.printer_name not in self.installed_print_devices[self.device_uri]:
self.FailureUI(self.__tr("<b>Printer queue setup failed.</b><p>Please restart CUPS and try again."))
else:
# TODO:
#service.sendEvent(self.hpssd_sock, EVENT_CUPS_QUEUES_CHANGED, device_uri=self.device_uri)
pass
QApplication.restoreOverrideCursor()
def setDefaultFaxName(self):
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
self.fax_uri = self.device_uri.replace('hp:', 'hpfax:')
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.fax_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
fax_name = default_model + "_fax"
# Check for duplicate names
if self.fax_uri in self.installed_fax_devices and \
fax_name in self.installed_fax_devices[self.fax_uri]:
#if fax_name in self.installed_queues or fax_name == self.printer_name:
i = 2
while True:
t = fax_name + "_%d" % i
if t not in self.installed_fax_devices[self.fax_uri]:
fax_name += "_%d" % i
break
i += 1
self.fax_name_ok = True
self.faxNameLineEdit.setText(fax_name)
self.faxNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultFaxNamePushButton.setEnabled(False)
self.fax_name = fax_name
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
printer_name = default_model
installed_printer_names = device.getSupportedCUPSPrinterNames(['hp'])
# Check for duplicate names
if (self.device_uri in self.installed_print_devices and printer_name in self.installed_print_devices[self.device_uri]) \
or (printer_name in installed_printer_names):
i = 2
while True:
t = printer_name + "_%d" % i
if (t not in installed_printer_names) and (self.device_uri not in self.installed_print_devices or t not in self.installed_print_devices[self.device_uri]):
printer_name += "_%d" % i
break
i += 1
self.printer_name_ok = True
self.PrinterNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printer_name = printer_name
def setupFax(self):
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
try:
cups.setPasswordPrompt("You do not have permission to add a fax device.")
if not os.path.exists(self.fax_ppd):
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, '', self.fax_ppd, self.fax_desc)
else:
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, self.fax_ppd, '', self.fax_desc)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
if self.fax_uri not in self.installed_fax_devices or \
self.fax_name not in self.installed_fax_devices[self.fax_uri]:
QApplication.restoreOverrideCursor()
FailureUI(self, self.__tr("<b>Fax queue setup failed.</b><p>Please restart CUPS and try again."))
else:
pass
# TODO:
#service.sendEvent(self.hpssd_sock, EVENT_CUPS_QUEUES_CHANGED, device_uri=self.fax_uri)
finally:
QApplication.restoreOverrideCursor()
def setupPrinter(self):
QApplication.setOverrideCursor(QApplication.waitCursor)
cups.setPasswordPrompt("You do not have permission to add a printer.")
#if self.ppd_file.startswith("foomatic:"):
if not os.path.exists(self.ppd_file): # assume foomatic: or some such
status, status_str = cups.addPrinter(self.printer_name.encode('utf8'), self.device_uri,
self.location, '', self.ppd_file, self.desc)
else:
status, status_str = cups.addPrinter(self.printer_name.encode('utf8'), self.device_uri,
self.location, self.ppd_file, '', self.desc)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
log.debug(self.installed_print_devices)
if self.device_uri not in self.installed_print_devices or \
self.printer_name not in self.installed_print_devices[self.device_uri]:
self.FailureUI(self.__tr("<b>Printer queue setup failed.</b><p>Please restart CUPS and try again."))
else:
# sending Event to add this device in hp-systray
utils.sendEvent(EVENT_CUPS_QUEUES_CHANGED,self.device_uri, self.printer_name)
QApplication.restoreOverrideCursor()
def setDefaultFaxName(self):
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
self.fax_uri = self.device_uri.replace('hp:', 'hpfax:')
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.fax_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
fax_name = default_model + "_fax"
installed_fax_names = device.getSupportedCUPSPrinterNames(['hpfax'])
# Check for duplicate names
if (self.fax_uri in self.installed_fax_devices and fax_name in self.installed_fax_devices[self.fax_uri]) \
or (fax_name in installed_fax_names):
i = 2
while True:
t = fax_name + "_%d" % i
if (t not in installed_fax_names) and (self.fax_uri not in self.installed_fax_devices or t not in self.installed_fax_devices[self.fax_uri]):
fax_name += "_%d" % i
break
i += 1
self.fax_name_ok = True
self.FaxNameLineEdit.setText(fax_name)
self.fax_name = fax_name
def setupPrinter(self):
status = cups.IPP_BAD_REQUEST
QApplication.setOverrideCursor(QApplication.waitCursor)
#if self.ppd_file.startswith("foomatic:"):
if not os.path.exists(self.ppd_file): # assume foomatic: or some such
add_prnt_args = (self.printer_name.encode('utf8'), self.device_uri,
self.location, '', self.ppd_file, self.desc)
else:
add_prnt_args = (self.printer_name.encode('utf8'), self.device_uri,
self.location, self.ppd_file, '', self.desc)
status, status_str = cups.cups_operation(cups.addPrinter, GUI_MODE,
'qt3', self, *add_prnt_args)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
log.debug(device.getSupportedCUPSDevices(['hp']))
if status != cups.IPP_OK:
self.FailureUI(
self.__tr("<b>Printer queue setup failed.</b><p>Error : %s " %
status_str))
else:
# sending Event to add this device in hp-systray
utils.sendEvent(EVENT_CUPS_QUEUES_ADDED, self.device_uri,
self.printer_name)
QApplication.restoreOverrideCursor()
return status
def setDefaultFaxName(self):
self.installed_fax_devices = device.getSupportedCUPSDevices(["hpfax"])
log.debug(self.installed_fax_devices)
self.fax_uri = self.device_uri.replace("hp:", "hpfax:")
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.fax_uri)
default_model = utils.xstrip(model.replace("series", "").replace("Series", ""), "_")
fax_name = default_model + "_fax"
installed_fax_names = device.getSupportedCUPSPrinterNames(["hpfax"])
# Check for duplicate names
if (self.fax_uri in self.installed_fax_devices and fax_name in self.installed_fax_devices[self.fax_uri]) or (
fax_name in installed_fax_names
):
# if fax_name in self.installed_queues or fax_name == self.printer_name:
i = 2
while True:
t = fax_name + "_%d" % i
if (t not in installed_fax_names) and (
self.fax_uri not in self.installed_fax_devices or t not in self.installed_fax_devices[self.fax_uri]
):
fax_name += "_%d" % i
break
i += 1
self.fax_name_ok = True
self.faxNameLineEdit.setText(fax_name)
self.faxNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultFaxNamePushButton.setEnabled(False)
self.fax_name = fax_name
def __init__(self, args, read_pipe):
QApplication.__init__(self, args)
self.menu = None
self.read_pipe = read_pipe
self.fmt = "80s80sI32sI80sf"
self.fmt_size = struct.calcsize(self.fmt)
self.timer_active = False
self.active_icon = False
self.user_settings = UserSettings()
self.user_settings.load()
self.user_settings.debug()
self.tray_icon = QSystemTrayIcon()
pm = load_pixmap("hp_logo", "32x32")
self.prop_icon = QIcon(pm)
a = load_pixmap('active', '16x16')
painter = QPainter(pm)
painter.drawPixmap(32, 0, a)
painter.end()
self.prop_active_icon = QIcon(pm)
self.tray_icon.setIcon(self.prop_icon)
self.session_bus = SessionBus()
self.service = None
for d in device.getSupportedCUPSDevices(back_end_filter=['hp', 'hpfax']):
self.addDevice(d)
self.tray_icon.setToolTip(self.__tr("HPLIP Status Service"))
QObject.connect(self.tray_icon, SIGNAL("messageClicked()"), self.messageClicked)
notifier = QSocketNotifier(self.read_pipe, QSocketNotifier.Read)
QObject.connect(notifier, SIGNAL("activated(int)"), self.notifierActivated)
QObject.connect(self.tray_icon, SIGNAL("activated(QSystemTrayIcon::ActivationReason)"), self.trayActivated)
signal.signal(signal.SIGINT, signal.SIG_DFL)
self.tray_icon.show()
if self.user_settings.systray_visible == SYSTRAY_VISIBLE_SHOW_ALWAYS:
self.tray_icon.setVisible(True)
else:
QTimer.singleShot(HIDE_INACTIVE_DELAY, self.timeoutHideWhenInactive) # show icon for awhile @ startup
self.tray_icon.setIcon(self.prop_active_icon)
self.active_icon = True
if "--ignore-update-firsttime" not in args:
self.handle_hplip_updation()
QTimer.singleShot(SET_MENU_DELAY, self.initDone)
self.update_timer = QTimer()
self.update_timer.connect(self.update_timer,SIGNAL("timeout()"),self.handle_hplip_updation)
self.update_timer.start(UPGRADE_CHECK_DELAY)
def __init__(self, args, read_pipe):
QApplication.__init__(self, args)
self.menu = None
self.read_pipe = read_pipe
self.fmt = "80s80sI32sI80sf"
self.fmt_size = struct.calcsize(self.fmt)
self.timer_active = False
self.active_icon = False
self.user_settings = UserSettings()
self.user_settings.load()
self.user_settings.debug()
self.tray_icon = QSystemTrayIcon()
pm = load_pixmap("hp_logo", "32x32")
self.prop_icon = QIcon(pm)
a = load_pixmap('active', '16x16')
painter = QPainter(pm)
painter.drawPixmap(32, 0, a)
painter.end()
self.prop_active_icon = QIcon(pm)
self.tray_icon.setIcon(self.prop_icon)
self.session_bus = SessionBus()
self.service = None
for d in device.getSupportedCUPSDevices(back_end_filter=['hp', 'hpfax']):
self.addDevice(d)
self.tray_icon.setToolTip(self.__tr("HPLIP Status Service"))
QObject.connect(self.tray_icon, SIGNAL("messageClicked()"), self.messageClicked)
notifier = QSocketNotifier(self.read_pipe, QSocketNotifier.Read)
QObject.connect(notifier, SIGNAL("activated(int)"), self.notifierActivated)
QObject.connect(self.tray_icon, SIGNAL("activated(QSystemTrayIcon::ActivationReason)"), self.trayActivated)
signal.signal(signal.SIGINT, signal.SIG_DFL)
self.tray_icon.show()
if self.user_settings.systray_visible == SYSTRAY_VISIBLE_SHOW_ALWAYS:
self.tray_icon.setVisible(True)
else:
QTimer.singleShot(HIDE_INACTIVE_DELAY, self.timeoutHideWhenInactive) # show icon for awhile @ startup
self.tray_icon.setIcon(self.prop_active_icon)
self.active_icon = True
if "--ignore-update-firsttime" not in args:
self.handle_hplip_updation()
QTimer.singleShot(SET_MENU_DELAY, self.initDone)
self.update_timer = QTimer()
self.update_timer.connect(self.update_timer,SIGNAL("timeout()"),self.handle_hplip_updation)
self.update_timer.start(UPGRADE_CHECK_DELAY)
def setupFax(self):
status = cups.IPP_BAD_REQUEST
QApplication.setOverrideCursor(QApplication.waitCursor)
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = \
device.parseDeviceURI(self.device_uri)
norm_model = models.normalizeModelName(model).lower()
fax_ppd,fax_ppd_name, nick = cups.getFaxPPDFile(self.mq, norm_model)
# Fax ppd not found
if not fax_ppd:
QApplication.restoreOverrideCursor()
log.error("Fax PPD file not found.")
if QMessageBox.warning(self, self.__tr("Unable to find HP fax PPD file."),
self.__tr("The PPD file (%1.ppd) needed to setup the fax queue was not found.").arg(fax_ppd_name),
self.__tr("Browse to file..."), # button 0
self.__tr("Quit") # button 1
) == 0: # Browse
while True:
ppd_dir = sys_conf.get('dirs', 'ppd')
fax_ppd = to_unicode(QFileDialog.getOpenFileName(ppd_dir,
"HP Fax PPD Files (*.ppd *.ppd.gz);;All Files (*)", self,
"open file dialog", "Choose the fax PPD file"))
if not fax_ppd: # user hit cancel
return
if os.path.exists(fax_ppd):
n = cups.getPPDDescription(fax_ppd)
if n == nick:
break
else:
self.FailureUI(self.__tr("<b>Incorrect fax PPD file.</b><p>The fax PPD file must have a nickname of '%1', not '%1'.").arg(nick).arg(n))
else:
self.FailureUI(self.__tr("<b>File not found.</b><p>hp-setup cannot find the file %1").arg(fax_ppd))
else: # Quit
return
if not os.path.exists(fax_ppd):
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, '', fax_ppd, self.fax_desc)
else:
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, fax_ppd, '', self.fax_desc)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
log.debug(device.getSupportedCUPSDevices(['hpfax']))
if status != cups.IPP_OK:
self.FailureUI(self.__tr("<b>Fax queue setup failed.</b><p>Error : %s "%status_str))
else:
# sending Event to add this device in hp-systray
utils.sendEvent(EVENT_CUPS_QUEUES_ADDED,self.fax_uri, self.fax_name)
QApplication.restoreOverrideCursor()
return status
def actionPushButton_clicked(self):
if self.path: # path
if not self.path.startswith('http://'):
self.path = 'file://' + self.path
else:
log.info("Checking for network connection...")
ok = utils.check_network_connection()
if not ok:
log.error("Network connection not detected.")
self.FailureUI(self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.path)
status, self.path, error_str = self.pluginObj.download(
self.path, self.plugin_download_callback)
if status != ERROR_SUCCESS:
self.pluginObj.deleteInstallationFiles(self.path)
self.FailureUI(error_str)
self.close()
return
if not self.pluginObj.run_plugin(self.path, GUI_MODE):
self.pluginObj.deleteInstallationFiles(self.path)
self.FailureUI(self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp']) #, 'hpfax'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(
log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
d.close()
self.pluginObj.deleteInstallationFiles(self.path)
self.SuccessUI("Plug-in install successful")
self.close()
def actionPushButton_clicked(self):
if self.path: # path
if not self.path.startswith('http://'):
self.path = 'file://' + self.path
else:
log.info("Checking for network connection...")
ok = utils.check_network_connection()
if not ok:
log.error("Network connection not detected.")
self.FailureUI(self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.path)
status, self.path, error_str = self.pluginObj.download(self.path, self.plugin_download_callback)
if status != ERROR_SUCCESS:
self.pluginObj.deleteInstallationFiles(self.path)
self.FailureUI(error_str)
self.close()
return
if not self.pluginObj.run_plugin(self.path, GUI_MODE):
self.pluginObj.deleteInstallationFiles(self.path)
self.FailureUI(self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp']) #, 'hpfax'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
d.close()
self.pluginObj.deleteInstallationFiles(self.path)
self.SuccessUI("Plug-in install successful")
self.close()
def setDevices(self):
if self.typ == DEVICEURICOMBOBOX_TYPE_PRINTER_ONLY:
be_filter = ['hp']
elif self.typ == DEVICEURICOMBOBOX_TYPE_FAX_ONLY:
be_filter = ['hpfax']
self.NameLabel.setText(self.__tr("Fax Device:"))
else: # DEVICEURICOMBOBOX_TYPE_PRINTER_AND_FAX
be_filter = ['hp', 'hpfax']
self.devices = device.getSupportedCUPSDevices(be_filter, self.filter)
return len(self.devices)
def setDevices(self):
if self.typ == DEVICEURICOMBOBOX_TYPE_PRINTER_ONLY:
be_filter = ['hp']
elif self.typ == DEVICEURICOMBOBOX_TYPE_FAX_ONLY:
be_filter = ['hpfax']
self.NameLabel.setText(self.__tr("Fax Device:"))
else: # DEVICEURICOMBOBOX_TYPE_PRINTER_AND_FAX
be_filter = ['hp', 'hpfax']
self.devices = device.getSupportedCUPSDevices(be_filter, self.filter)
return len(self.devices)
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
#self.installed_print_devices = device.getSupportedCUPSDevices('*')
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(
self.device_uri)
default_model = utils.xstrip(
model.replace('series', '').replace('Series', ''), '_')
printer_name = default_model
installed_printer_names = device.getSupportedCUPSPrinterNames(['hp'])
# Check for duplicate names
if (self.device_uri in self.installed_print_devices and printer_name in self.installed_print_devices[self.device_uri]) \
or (printer_name in installed_printer_names):
warn_text = self.__tr(
"<b>One or more print queues already exist for this device: %s</b>.<br> <b>Would you like to install another print queue for this device ?</b>"
% ', '.join([
printer.encode('utf-8')
for printer in installed_printer_names
if printer_name in printer
]))
if (QMessageBox.warning(self, self.caption(), warn_text,
QMessageBox.Yes, QMessageBox.No,
QMessageBox.NoButton) == QMessageBox.Yes):
i = 2
while True:
t = printer_name + "_%d" % i
if (t not in installed_printer_names) and (
self.device_uri not in self.installed_print_devices
or t not in self.installed_print_devices[
self.device_uri]):
printer_name += "_%d" % i
break
i += 1
else:
self.close()
self.printer_name_ok = True
self.printerNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printerNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultPrinterNamePushButton.setEnabled(False)
self.printer_name = printer_name
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(["hp"])
# self.installed_print_devices = device.getSupportedCUPSDevices('*')
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
default_model = utils.xstrip(model.replace("series", "").replace("Series", ""), "_")
printer_name = default_model
installed_printer_names = device.getSupportedCUPSPrinterNames(["hp"])
# Check for duplicate names
if (
self.device_uri in self.installed_print_devices
and printer_name in self.installed_print_devices[self.device_uri]
) or (printer_name in installed_printer_names):
warn_text = self.__tr(
"<b>One or more print queues already exist for this device: %s</b>.<br> <b>Would you like to install another print queue for this device ?</b>"
% ", ".join([printer.encode("utf-8") for printer in installed_printer_names if printer_name in printer])
)
if (
QMessageBox.warning(
self, self.caption(), warn_text, QMessageBox.Yes, QMessageBox.No, QMessageBox.NoButton
)
== QMessageBox.Yes
):
i = 2
while True:
t = printer_name + "_%d" % i
if (t not in installed_printer_names) and (
self.device_uri not in self.installed_print_devices
or t not in self.installed_print_devices[self.device_uri]
):
printer_name += "_%d" % i
break
i += 1
else:
self.close()
self.printer_name_ok = True
self.printerNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printerNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultPrinterNamePushButton.setEnabled(False)
self.printer_name = printer_name
def setupPrinter(self):
status = cups.IPP_BAD_REQUEST
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
try:
if not os.path.exists(self.print_ppd[0]): # assume foomatic: or some such
add_prnt_args = (self.printer_name.encode('utf8'), self.device_uri, self.print_location, '', self.print_ppd[0], self.print_desc)
else:
add_prnt_args = (self.printer_name.encode('utf8'), self.device_uri, self.print_location, self.print_ppd[0], '', self.print_desc)
status, status_str = cups.cups_operation(cups.addPrinter, GUI_MODE, 'qt4', self, *add_prnt_args)
log.debug(device.getSupportedCUPSDevices(['hp']))
if status != cups.IPP_OK:
QApplication.restoreOverrideCursor()
FailureUI(self, self.__tr("<b>Printer queue setup failed.</b> <p>Error : %s"%status_str))
else:
# sending Event to add this device in hp-systray
utils.sendEvent(EVENT_CUPS_QUEUES_ADDED,self.device_uri, self.printer_name)
finally:
QApplication.restoreOverrideCursor()
return status
def setupPrinter(self):
status = cups.IPP_BAD_REQUEST
QApplication.setOverrideCursor(QApplication.waitCursor)
# if self.ppd_file.startswith("foomatic:"):
if not os.path.exists(self.ppd_file): # assume foomatic: or some such
add_prnt_args = (self.printer_name, self.device_uri, self.location, "", self.ppd_file, self.desc)
else:
add_prnt_args = (self.printer_name, self.device_uri, self.location, self.ppd_file, "", self.desc)
status, status_str = cups.cups_operation(cups.addPrinter, GUI_MODE, "qt3", self, *add_prnt_args)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
log.debug(device.getSupportedCUPSDevices(["hp"]))
if status != cups.IPP_OK:
self.FailureUI(self.__tr("<b>Printer queue setup failed.</b><p>Error : %s " % status_str))
else:
# sending Event to add this device in hp-systray
utils.sendEvent(EVENT_CUPS_QUEUES_ADDED, self.device_uri, self.printer_name)
QApplication.restoreOverrideCursor()
return status
def setupFax(self):
status = cups.IPP_BAD_REQUEST
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
try:
if not os.path.exists(self.fax_ppd):
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, '', self.fax_ppd, self.fax_desc)
else:
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, self.fax_ppd, '', self.fax_desc)
log.debug(device.getSupportedCUPSDevices(['hpfax']))
if status != cups.IPP_OK:
QApplication.restoreOverrideCursor()
FailureUI(self, self.__tr("<b>Fax queue setup failed.</b><p>Error : %s"%status_str))
else:
# sending Event to add this device in hp-systray
utils.sendEvent(EVENT_CUPS_QUEUES_ADDED,self.fax_uri, self.fax_name)
finally:
QApplication.restoreOverrideCursor()
return status
def notifierActivated(self, s):
m = ''
while True:
try:
r, w, e = select.select([self.read_pipe], [], [self.read_pipe], 1.0)
except select.error:
log.debug("Error in select()")
break
if e:
log.error("Pipe error: %s" % e)
break
if r:
#m = ''.join([m, os.read(self.read_pipe, self.fmt_size)])
m = os.read(self.read_pipe, self.fmt_size)
while len(m) >= self.fmt_size:
event = device.Event(*[x.rstrip(b'\x00').decode('utf-8') if isinstance(x, bytes) else x for x in struct.unpack(self.fmt, m[:self.fmt_size])])
m = m[self.fmt_size:]
if event.event_code == EVENT_ERROR_NO_PROBED_DEVICES_FOUND:
newmsg = "HPLIP cannot detect devices in your network. This may be due to existing firewall settings blocking the required ports like (5353/udp). When you are in a trusted network environment, you may open the ports for network services like mdns and slp in the firewall. For detailed steps follow the link.\n\n http://hplipopensource.com/node/375"
FailureUI(None, newmsg, "")
continue
if event.event_code == EVENT_CUPS_QUEUES_REMOVED or event.event_code == EVENT_CUPS_QUEUES_ADDED:
self.resetDevice()
for d in device.getSupportedCUPSDevices(back_end_filter=['hp', 'hpfax']):
self.addDevice(d)
self.setMenu()
if event.event_code == EVENT_USER_CONFIGURATION_CHANGED:
log.debug("Re-reading configuration (EVENT_USER_CONFIGURATION_CHANGED)")
self.user_settings.load()
self.user_settings.debug()
elif event.event_code == EVENT_SYSTEMTRAY_EXIT:
self.quit()
return
if self.user_settings.systray_visible in \
(SYSTRAY_VISIBLE_SHOW_ALWAYS, SYSTRAY_VISIBLE_HIDE_WHEN_INACTIVE):
log.debug("Showing...")
self.tray_icon.setVisible(True)
if event.event_code == EVENT_DEVICE_UPDATE_ACTIVE:
if not self.active_icon:
self.tray_icon.setIcon(self.prop_active_icon)
self.active_icon = True
continue
elif event.event_code == EVENT_DEVICE_UPDATE_INACTIVE:
if self.active_icon:
self.tray_icon.setIcon(self.prop_icon)
self.active_icon = False
continue
elif event.event_code == EVENT_DEVICE_UPDATE_BLIP:
if not self.active_icon:
self.tray_icon.setIcon(self.prop_active_icon)
self.active_icon = True
QTimer.singleShot(BLIP_DELAY, self.blipTimeout)
continue
if self.user_settings.systray_visible in (SYSTRAY_VISIBLE_HIDE_WHEN_INACTIVE, SYSTRAY_VISIBLE_HIDE_ALWAYS):
log.debug("Waiting to hide...")
QTimer.singleShot(HIDE_INACTIVE_DELAY, self.timeoutHideWhenInactive)
if event.event_code <= EVENT_MAX_USER_EVENT or \
event.event_code == EVENT_CUPS_QUEUES_REMOVED or event.event_code == EVENT_CUPS_QUEUES_ADDED:
if event.event_code != EVENT_CUPS_QUEUES_REMOVED:
self.addDevice(event.device_uri)
self.setMenu()
if self.tray_icon.supportsMessages():
log.debug("Tray icon message:")
event.debug()
error_state = STATUS_TO_ERROR_STATE_MAP.get(event.event_code, ERROR_STATE_CLEAR)
desc = device.queryString(event.event_code)
show_message = False
if self.user_settings.systray_messages == SYSTRAY_MESSAGES_SHOW_ALL: # OK, Busy
show_message = True
elif self.user_settings.systray_messages in (SYSTRAY_MESSAGES_SHOW_ERRORS_AND_WARNINGS, SYSTRAY_MESSAGES_SHOW_ERRORS_ONLY):
if error_state == ERROR_STATE_ERROR:
show_message = True
elif self.user_settings.systray_messages == SYSTRAY_MESSAGES_SHOW_ERRORS_AND_WARNINGS and \
error_state in (ERROR_STATE_WARNING, ERROR_STATE_LOW_SUPPLIES, ERROR_STATE_LOW_PAPER):
show_message = True
if event.printer_name:
d = QString(event.printer_name)
else:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = \
device.parseDeviceURI(event.device_uri)
if bus == 'usb':
idd = serial
elif bus == 'net':
idd = host
elif bus == 'par':
idd = dev_file
else:
idd = 'unknown'
self.model = models.normalizeModelUIName(model)
if back_end == 'hp':
d = self.__tr("%s Printer (%s)"%(model,idd))
elif back_end == 'hpaio':
d = self.__tr("%s Scanner (%s)"%(model,idd))
elif back_end == 'hpfax':
d = self.__tr("%s Fax (%s)"%(model,idd))
else:
d = self.__tr("%s (%s)"%(model,idd))
if show_message:
if have_pynotify and pynotify.init("hplip"): # Use libnotify/pynotify
icon, urgency = ERROR_STATE_TO_ICON_AND_URGENCY_PYNOTIFY.get(error_state,
(getPynotifyIcon('info'), pynotify.URGENCY_NORMAL))
if event.job_id and event.title:
msg = "%s\n%s: %s\n(%s/%s)" % (to_unicode(d), desc, event.title, event.username, event.job_id)
log.debug("Notify: uri=%s desc=%s title=%s user=%s job_id=%d code=%d" %
(event.device_uri, desc, event.title, event.username, event.job_id, event.event_code))
else:
msg = "%s\n%s (%s)" % (to_unicode(d), desc, event.event_code)
log.debug("Notify: uri=%s desc=%s code=%d" % (event.device_uri, desc, event.event_code))
n = pynotify.Notification("HPLIP Device Status", msg, icon)
# CRID: 11833 Debian Traceback error notification exceeded
n.set_hint('transient', True)
n.set_urgency(urgency)
if error_state == ERROR_STATE_ERROR:
n.set_timeout(pynotify.EXPIRES_NEVER)
else:
n.set_timeout(TRAY_MESSAGE_DELAY)
n.show()
else: # Use "standard" message bubbles
icon = ERROR_STATE_TO_ICON.get(error_state, QSystemTrayIcon.Information)
if event.job_id and event.title:
log.debug("Bubble: uri=%s desc=%s title=%s user=%s job_id=%d code=%d" %
(event.device_uri, desc, event.title, event.username, event.job_id, event.event_code))
self.tray_icon.showMessage(self.__tr("HPLIP Device Status"),
QString("%s\n%s: %s\n(%s/%s)"%(d,desc, event.title,event.username,event.job_id)),
icon, TRAY_MESSAGE_DELAY)
else:
log.debug("Bubble: uri=%s desc=%s code=%d" % (event.device_uri, desc, event.event_code))
self.tray_icon.showMessage(self.__tr("HPLIP Device Status"),
QString("%s\n%s (%s)"%(d,desc,event.event_code)),
icon, TRAY_MESSAGE_DELAY)
else:
break
def NextButton_clicked(self):
if self.SkipRadioButton.isChecked():
log.debug("Skipping plug-in installation.")
self.close()
return
beginWaitCursor()
try:
if self.plugin_path is None: # download
# read plugin.conf (local or on sf.net) to get plugin_path (http://)
plugin_conf_url = self.core.get_plugin_conf_url()
if plugin_conf_url.startswith('file://'):
pass
else:
log.info("Checking for network connection...")
ok = self.core.check_network_connection()
if not ok:
log.error("Network connection not detected.")
endWaitCursor()
FailureUI(self, self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading configuration file from: %s" % plugin_conf_url)
self.plugin_path, size, checksum, timestamp, ok = self.core.get_plugin_info(plugin_conf_url,
self.plugin_download_callback)
log.debug("path=%s, size=%d, checksum=%s, timestamp=%f, ok=%s" %
(self.plugin_path, size, checksum, timestamp, ok))
if not self.plugin_path.startswith('http://') and not self.plugin_path.startswith('file://'):
self.plugin_path = 'file://' + self.plugin_path
else: # path
if not self.plugin_path.startswith('http://'):
self.plugin_path = 'file://' + self.plugin_path
size, checksum, timestamp = 0, '', 0
if self.plugin_path.startswith('file://'):
pass
else:
log.info("Checking for network connection...")
ok = self.core.check_network_connection()
if not ok:
log.error("Network connection not detected.")
endWaitCursor()
FailureUI(self, self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.plugin_path)
status, ret = self.core.download_plugin(self.plugin_path, size, checksum, timestamp,
self.plugin_download_callback)
if status in (PLUGIN_INSTALL_ERROR_UNABLE_TO_RECV_KEYS, PLUGIN_INSTALL_ERROR_DIGITAL_SIG_NOT_FOUND):
endWaitCursor()
if QMessageBox.question(self, self.__tr("Digital signature download failed"),
self.__tr("<b>The download of the digital signature file failed.</b><p>Without this file, it is not possible to authenticate and validate the plug-in prior to installation.</p>Do you still want to install the plug-in?"),
QMessageBox.Yes | QMessageBox.No) != QMessageBox.Yes:
self.core.delete_plugin()
self.close()
return
elif status != PLUGIN_INSTALL_ERROR_NONE:
if status == PLUGIN_INSTALL_ERROR_PLUGIN_FILE_NOT_FOUND:
desc = self.__tr("<b>ERROR: Plug-in file not found (server returned 404 or similar error).</b><p>Error code: %1</p>").arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_DIGITAL_SIG_BAD:
desc = self.__tr("<b>ERROR: Plug-in file does not match its digital signature.</b><p>File may have been corrupted or altered.</p><p>Error code: %1</p>").arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_PLUGIN_FILE_CHECKSUM_ERROR:
desc = self.__tr("<b>ERROR: Plug-in file does not match its checksum. File may have been corrupted or altered.")
elif status == PLUGIN_INSTALL_ERROR_NO_NETWORK:
desc = self.__tr("<b>ERROR: Unable to connect to network to download the plug-in.</b><p>Please check your network connection and try again.</p>")
elif status == PLUGIN_INSTALL_ERROR_DIRECTORY_ERROR:
desc = self.__tr("<b>ERROR: Unable to create the plug-in directory.</b><p>Please check your permissions and try again.</p>")
self.core.delete_plugin()
endWaitCursor()
FailureUI(self, desc)
self.close()
return
if not self.core.run_plugin(GUI_MODE, self.plugin_install_callback):
self.core.delete_plugin()
endWaitCursor()
FailureUI(self, self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = None
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
endWaitCursor()
FailureUI(self, self.__tr("<b>Firmware download to device failed.</b><p>%1</p>").arg(dev))
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
else:
endWaitCursor()
FailureUI(self, self.__tr("<b>Firmware download to device failed.</b><p>%1</p>").arg(dev))
finally:
if d is not None:
d.close()
finally:
endWaitCursor()
self.core.delete_plugin()
SuccessUI(self, self.__tr("<b>Plug-in installation successful.</b>"))
self.result = True
self.close()
def actionPushButton_clicked(self):
core = core_install.CoreInstall()
core.set_plugin_version() #self.version)
if self.path is None: # download
# read plugin.conf (local or on sf.net) to get plugin_path (http://)
plugin_conf_url = core.get_plugin_conf_url()
if plugin_conf_url.startswith('file://'):
pass
else:
pass
log.info("Checking for network connection...")
ok = core.check_network_connection()
if not ok:
log.error("Network connection not detected.")
self.FailureUI(self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading configuration file from: %s" % plugin_conf_url)
self.path, size, checksum, timestamp, ok = core.get_plugin_info(plugin_conf_url,
self.plugin_download_callback)
log.debug("path=%s, size=%d, checksum=%s, timestamp=%f, ok=%s" %
(self.path, size, checksum, timestamp, ok))
if not self.path.startswith('http://') and not self.path.startswith('file://'):
self.path = 'file://' + self.path
else: # path
if not self.path.startswith('http://'):
self.path = 'file://' + self.path
size, checksum, timestamp = 0, '', 0
if self.path.startswith('file://'):
pass
else:
log.info("Checking for network connection...")
ok = core.check_network_connection()
if not ok:
log.error("Network connection not detected.")
self.FailureUI(self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.path)
status, ret = core.download_plugin(self.path, size, checksum, timestamp,
self.plugin_download_callback)
if status != PLUGIN_INSTALL_ERROR_NONE:
if status == PLUGIN_INSTALL_ERROR_PLUGIN_FILE_NOT_FOUND:
desc = self.__tr("<b>ERROR: Plug-in file not found (server returned 404 or similar error).</b><p>Error code: %1</p>").arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_DIGITAL_SIG_NOT_FOUND:
desc = self.__tr("<b>ERROR: Plug-in digital signature file not found (server returned 404 or similar error).</b><p>Error code: %1</p>").arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_DIGITAL_SIG_BAD:
desc = self.__tr("<b>ERROR: Plug-in file does not match its digital signature.</b><p>File may have been corrupted or altered.</p><p>Error code: %1</p>").arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_PLUGIN_FILE_CHECKSUM_ERROR:
desc = self.__tr("<b>ERROR: Plug-in file does not match its checksum. File may have been corrupted or altered.")
elif status == PLUGIN_INSTALL_ERROR_NO_NETWORK:
desc = self.__tr("<b>ERROR: Unable to connect to network to download the plug-in.</b><p>Please check your network connection and try again.</p>")
elif status == PLUGIN_INSTALL_ERROR_DIRECTORY_ERROR:
desc = self.__tr("<b>ERROR: Unable to create the plug-in directory.</b><p>Please check your permissions and try again.</p>")
elif status == PLUGIN_INSTALL_ERROR_UNABLE_TO_RECV_KEYS:
desc = self.__tr("<b>ERROR: Unable to download the public HPLIP keys from the keyserver.</b><p>Error code: %1</p>").arg(str(ret))
core.delete_plugin()
self.FailureUI(desc)
self.close()
return
local_plugin = ret
if not core.run_plugin(GUI_MODE, self.plugin_install_callback):
core.delete_plugin()
self.FailureUI(self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp']) #, 'hpfax'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
d.close()
core.delete_plugin()
self.SuccessUI("Plug-in install successful.")
self.close()
def setupFax(self):
QApplication.setOverrideCursor(QApplication.waitCursor)
if self.mq.get('fax-type', FAX_TYPE_NONE) == FAX_TYPE_MARVELL:
fax_ppd_name = "HP-Fax3-hplip" # Fixed width (2528 pixels) and 300dpi rendering
nick = "HP Fax 3"
if self.mq.get('fax-type', FAX_TYPE_NONE) == FAX_TYPE_SOAP or self.mq.get('fax-type', FAX_TYPE_NONE) == FAX_TYPE_LEDMSOAP:
fax_ppd_name = "HP-Fax2-hplip" # Fixed width (2528 pixels) and 300dpi rendering
nick = "HP Fax 2"
if self.mq.get('fax-type', FAX_TYPE_NONE) == FAX_TYPE_LEDM:
fax_ppd_name = "HP-Fax4-hplip" # Fixed width (1728 pixels) and 200dpi rendering
nick = "HP Fax 4"
else:
fax_ppd_name = "HP-Fax-hplip" # Standard
nick = "HP Fax"
ppds = []
log.debug("Searching for fax file %s..." % fax_ppd_name)
ppd_dir = sys_conf.get('dirs', 'ppd')
for f in utils.walkFiles(ppd_dir, pattern="HP-Fax*.ppd*", abs_paths=True):
ppds.append(f)
for f in ppds:
if f.find(fax_ppd_name) >= 0:
fax_ppd = f
log.debug("Found PDD file: %s" % fax_ppd)
log.debug("Nickname: %s" % cups.getPPDDescription(fax_ppd))
break
else:
QApplication.restoreOverrideCursor()
log.error("Fax PPD file not found.")
if QMessageBox.warning(self, self.__tr("Unable to find HP fax PPD file."),
self.__tr("The PPD file (%1.ppd) needed to setup the fax queue was not found.").arg(fax_ppd_name),
self.__tr("Browse to file..."), # button 0
self.__tr("Quit") # button 1
) == 0: # Browse
while True:
ppd_dir = sys_conf.get('dirs', 'ppd')
fax_ppd = unicode(QFileDialog.getOpenFileName(ppd_dir,
"HP Fax PPD Files (*.ppd *.ppd.gz);;All Files (*)", self,
"open file dialog", "Choose the fax PPD file"))
if not fax_ppd: # user hit cancel
return
if os.path.exists(fax_ppd):
n = cups.getPPDDescription(fax_ppd)
if n == nick:
break
else:
self.FailureUI(self.__tr("<b>Incorrect fax PPD file.</b><p>The fax PPD file must have a nickname of '%1', not '%1'.").arg(nick).arg(n))
else:
self.FailureUI(self.__tr("<b>File not found.</b><p>hp-setup cannot find the file %1").arg(fax_ppd))
else: # Quit
return
cups.setPasswordPrompt("You do not have permission to add a fax device.")
if not os.path.exists(fax_ppd):
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, '', fax_ppd, self.fax_desc)
else:
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri, self.fax_location, fax_ppd, '', self.fax_desc)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
if self.fax_uri not in self.installed_fax_devices or \
self.fax_name not in self.installed_fax_devices[self.fax_uri]:
self.FailureUI(self.__tr("<b>Fax queue setup failed.</b><p>Please restart CUPS and try again."))
else:
pass
# TODO:
#service.sendEvent(self.hpssd_sock, EVENT_CUPS_QUEUES_CHANGED, device_uri=self.fax_uri)
QApplication.restoreOverrideCursor()
def actionPushButton_clicked(self):
core = core_install.CoreInstall()
core.set_plugin_version() #self.version)
if self.path is None: # download
# read plugin.conf (local or on sf.net) to get plugin_path (http://)
plugin_conf_url = core.get_plugin_conf_url()
if plugin_conf_url.startswith('file://'):
pass
else:
pass
log.info("Checking for network connection...")
ok = core.check_network_connection()
if not ok:
log.error("Network connection not detected.")
self.FailureUI(
self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading configuration file from: %s" %
plugin_conf_url)
self.path, size, checksum, timestamp, ok = core.get_plugin_info(
plugin_conf_url, self.plugin_download_callback)
log.debug("path=%s, size=%d, checksum=%s, timestamp=%f, ok=%s" %
(self.path, size, checksum, timestamp, ok))
if not self.path.startswith(
'http://') and not self.path.startswith('file://'):
self.path = 'file://' + self.path
else: # path
if not self.path.startswith('http://'):
self.path = 'file://' + self.path
size, checksum, timestamp = 0, '', 0
if self.path.startswith('file://'):
pass
else:
log.info("Checking for network connection...")
ok = core.check_network_connection()
if not ok:
log.error("Network connection not detected.")
self.FailureUI(self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.path)
status, ret = core.download_plugin(self.path, size, checksum,
timestamp,
self.plugin_download_callback)
if status != PLUGIN_INSTALL_ERROR_NONE:
if status == PLUGIN_INSTALL_ERROR_PLUGIN_FILE_NOT_FOUND:
desc = self.__tr(
"<b>ERROR: Plug-in file not found (server returned 404 or similar error).</b><p>Error code: %1</p>"
).arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_DIGITAL_SIG_NOT_FOUND:
desc = self.__tr(
"<b>ERROR: Plug-in digital signature file not found (server returned 404 or similar error).</b><p>Error code: %1</p>"
).arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_DIGITAL_SIG_BAD:
desc = self.__tr(
"<b>ERROR: Plug-in file does not match its digital signature.</b><p>File may have been corrupted or altered.</p><p>Error code: %1</p>"
).arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_PLUGIN_FILE_CHECKSUM_ERROR:
desc = self.__tr(
"<b>ERROR: Plug-in file does not match its checksum. File may have been corrupted or altered."
)
elif status == PLUGIN_INSTALL_ERROR_NO_NETWORK:
desc = self.__tr(
"<b>ERROR: Unable to connect to network to download the plug-in.</b><p>Please check your network connection and try again.</p>"
)
elif status == PLUGIN_INSTALL_ERROR_DIRECTORY_ERROR:
desc = self.__tr(
"<b>ERROR: Unable to create the plug-in directory.</b><p>Please check your permissions and try again.</p>"
)
elif status == PLUGIN_INSTALL_ERROR_UNABLE_TO_RECV_KEYS:
desc = self.__tr(
"<b>ERROR: Unable to download the public HPLIP keys from the keyserver.</b><p>Error code: %1</p>"
).arg(str(ret))
core.delete_plugin()
self.FailureUI(desc)
self.close()
return
local_plugin = ret
if not core.run_plugin(GUI_MODE, self.plugin_install_callback):
core.delete_plugin()
self.FailureUI(self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp']) #, 'hpfax'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(
log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
d.close()
core.delete_plugin()
self.SuccessUI("Plug-in install successful.")
self.close()
def NextButton_clicked(self):
if self.SkipRadioButton.isChecked():
log.debug("Skipping plug-in installation.")
self.close()
return
beginWaitCursor()
try:
if self.plugin_path is None: # download
# read plugin.conf (local or on sf.net) to get plugin_path (http://)
plugin_conf_url = self.core.get_plugin_conf_url()
if plugin_conf_url.startswith('file://'):
pass
else:
log.info("Checking for network connection...")
ok = self.core.check_network_connection()
if not ok:
log.error("Network connection not detected.")
endWaitCursor()
FailureUI(
self,
self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading configuration file from: %s" %
plugin_conf_url)
self.plugin_path, size, checksum, timestamp, ok = self.core.get_plugin_info(
plugin_conf_url, self.plugin_download_callback)
log.debug(
"path=%s, size=%d, checksum=%s, timestamp=%f, ok=%s" %
(self.plugin_path, size, checksum, timestamp, ok))
if not self.plugin_path.startswith(
'http://') and not self.plugin_path.startswith(
'file://'):
self.plugin_path = 'file://' + self.plugin_path
else: # path
if not self.plugin_path.startswith('http://'):
self.plugin_path = 'file://' + self.plugin_path
size, checksum, timestamp = 0, '', 0
if self.plugin_path.startswith('file://'):
pass
else:
log.info("Checking for network connection...")
ok = self.core.check_network_connection()
if not ok:
log.error("Network connection not detected.")
endWaitCursor()
FailureUI(self,
self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.plugin_path)
status, ret = self.core.download_plugin(
self.plugin_path, size, checksum, timestamp,
self.plugin_download_callback)
if status in (PLUGIN_INSTALL_ERROR_UNABLE_TO_RECV_KEYS,
PLUGIN_INSTALL_ERROR_DIGITAL_SIG_NOT_FOUND):
endWaitCursor()
if QMessageBox.question(
self, self.__tr("Digital signature download failed"),
self.__tr(
"<b>The download of the digital signature file failed.</b><p>Without this file, it is not possible to authenticate and validate the plug-in prior to installation.</p>Do you still want to install the plug-in?"
),
QMessageBox.Yes | QMessageBox.No) != QMessageBox.Yes:
self.core.delete_plugin()
self.close()
return
elif status != PLUGIN_INSTALL_ERROR_NONE:
if status == PLUGIN_INSTALL_ERROR_PLUGIN_FILE_NOT_FOUND:
desc = self.__tr(
"<b>ERROR: Plug-in file not found (server returned 404 or similar error).</b><p>Error code: %1</p>"
).arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_DIGITAL_SIG_BAD:
desc = self.__tr(
"<b>ERROR: Plug-in file does not match its digital signature.</b><p>File may have been corrupted or altered.</p><p>Error code: %1</p>"
).arg(str(ret))
elif status == PLUGIN_INSTALL_ERROR_PLUGIN_FILE_CHECKSUM_ERROR:
desc = self.__tr(
"<b>ERROR: Plug-in file does not match its checksum. File may have been corrupted or altered."
)
elif status == PLUGIN_INSTALL_ERROR_NO_NETWORK:
desc = self.__tr(
"<b>ERROR: Unable to connect to network to download the plug-in.</b><p>Please check your network connection and try again.</p>"
)
elif status == PLUGIN_INSTALL_ERROR_DIRECTORY_ERROR:
desc = self.__tr(
"<b>ERROR: Unable to create the plug-in directory.</b><p>Please check your permissions and try again.</p>"
)
self.core.delete_plugin()
endWaitCursor()
FailureUI(self, desc)
self.close()
return
if not self.core.run_plugin(GUI_MODE,
self.plugin_install_callback):
self.core.delete_plugin()
endWaitCursor()
FailureUI(self, self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(
log.bold("\nDownloading firmware to device %s..." %
dev))
try:
d = None
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
endWaitCursor()
FailureUI(
self,
self.__tr(
"<b>Firmware download to device failed.</b><p>%1</p>"
).arg(dev))
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
else:
endWaitCursor()
FailureUI(
self,
self.__tr(
"<b>Firmware download to device failed.</b><p>%1</p>"
).arg(dev))
finally:
if d is not None:
d.close()
finally:
endWaitCursor()
self.core.delete_plugin()
SuccessUI(self, self.__tr("<b>Plug-in installation successful.</b>"))
self.result = True
self.close()
def setupFax(self):
QApplication.setOverrideCursor(QApplication.waitCursor)
if self.mq.get('fax-type', FAX_TYPE_NONE) == FAX_TYPE_MARVELL:
fax_ppd_name = "HP-Fax3-hplip" # Fixed width (2528 pixels) and 300dpi rendering
nick = "HP Fax 3"
if self.mq.get('fax-type',
FAX_TYPE_NONE) == FAX_TYPE_SOAP or self.mq.get(
'fax-type', FAX_TYPE_NONE) == FAX_TYPE_LEDMSOAP:
fax_ppd_name = "HP-Fax2-hplip" # Fixed width (2528 pixels) and 300dpi rendering
nick = "HP Fax 2"
if self.mq.get('fax-type', FAX_TYPE_NONE) == FAX_TYPE_LEDM:
fax_ppd_name = "HP-Fax4-hplip" # Fixed width (1728 pixels) and 200dpi rendering
nick = "HP Fax 4"
else:
fax_ppd_name = "HP-Fax-hplip" # Standard
nick = "HP Fax"
ppds = []
log.debug("Searching for fax file %s..." % fax_ppd_name)
ppd_dir = sys_conf.get('dirs', 'ppd')
for f in utils.walkFiles(ppd_dir,
pattern="HP-Fax*.ppd*",
abs_paths=True):
ppds.append(f)
for f in ppds:
if f.find(fax_ppd_name) >= 0:
fax_ppd = f
log.debug("Found PDD file: %s" % fax_ppd)
log.debug("Nickname: %s" % cups.getPPDDescription(fax_ppd))
break
else:
QApplication.restoreOverrideCursor()
log.error("Fax PPD file not found.")
if QMessageBox.warning(
self,
self.__tr("Unable to find HP fax PPD file."),
self.__tr(
"The PPD file (%1.ppd) needed to setup the fax queue was not found."
).arg(fax_ppd_name),
self.__tr("Browse to file..."), # button 0
self.__tr("Quit") # button 1
) == 0: # Browse
while True:
ppd_dir = sys_conf.get('dirs', 'ppd')
fax_ppd = unicode(
QFileDialog.getOpenFileName(
ppd_dir,
"HP Fax PPD Files (*.ppd *.ppd.gz);;All Files (*)",
self, "open file dialog",
"Choose the fax PPD file"))
if not fax_ppd: # user hit cancel
return
if os.path.exists(fax_ppd):
n = cups.getPPDDescription(fax_ppd)
if n == nick:
break
else:
self.FailureUI(
self.__tr(
"<b>Incorrect fax PPD file.</b><p>The fax PPD file must have a nickname of '%1', not '%1'."
).arg(nick).arg(n))
else:
self.FailureUI(
self.__tr(
"<b>File not found.</b><p>hp-setup cannot find the file %1"
).arg(fax_ppd))
else: # Quit
return
cups.setPasswordPrompt(
"You do not have permission to add a fax device.")
if not os.path.exists(fax_ppd):
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri,
self.fax_location, '',
fax_ppd, self.fax_desc)
else:
status, status_str = cups.addPrinter(self.fax_name.encode('utf8'),
self.fax_uri,
self.fax_location, fax_ppd,
'', self.fax_desc)
log.debug("addPrinter() returned (%d, %s)" % (status, status_str))
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
if self.fax_uri not in self.installed_fax_devices or \
self.fax_name not in self.installed_fax_devices[self.fax_uri]:
self.FailureUI(
self.__tr(
"<b>Fax queue setup failed.</b><p>Please restart CUPS and try again."
))
else:
pass
# TODO:
#service.sendEvent(self.hpssd_sock, EVENT_CUPS_QUEUES_CHANGED, device_uri=self.fax_uri)
QApplication.restoreOverrideCursor()
def notifierActivated(self, s):
m = ''
while True:
try:
r, w, e = select.select([self.read_pipe], [], [self.read_pipe], 1.0)
except select.error:
log.debug("Error in select()")
break
if e:
log.error("Pipe error: %s" % e)
break
if r:
m = ''.join([m, os.read(self.read_pipe, self.fmt_size)])
while len(m) >= self.fmt_size:
event = device.Event(*struct.unpack(self.fmt, m[:self.fmt_size]))
m = m[self.fmt_size:]
if event.event_code == EVENT_CUPS_QUEUES_CHANGED:
self.resetDevice()
for d in device.getSupportedCUPSDevices(back_end_filter=['hp', 'hpfax']):
self.addDevice(d)
self.setMenu()
if event.event_code == EVENT_USER_CONFIGURATION_CHANGED:
log.debug("Re-reading configuration (EVENT_USER_CONFIGURATION_CHANGED)")
self.user_settings.load()
self.user_settings.debug()
elif event.event_code == EVENT_SYSTEMTRAY_EXIT:
self.quit()
return
if self.user_settings.systray_visible in \
(SYSTRAY_VISIBLE_SHOW_ALWAYS, SYSTRAY_VISIBLE_HIDE_WHEN_INACTIVE):
log.debug("Showing...")
self.tray_icon.setVisible(True)
if event.event_code == EVENT_DEVICE_UPDATE_ACTIVE:
if not self.active_icon:
self.tray_icon.setIcon(self.prop_active_icon)
self.active_icon = True
continue
elif event.event_code == EVENT_DEVICE_UPDATE_INACTIVE:
if self.active_icon:
self.tray_icon.setIcon(self.prop_icon)
self.active_icon = False
continue
elif event.event_code == EVENT_DEVICE_UPDATE_BLIP:
if not self.active_icon:
self.tray_icon.setIcon(self.prop_active_icon)
self.active_icon = True
QTimer.singleShot(BLIP_DELAY, self.blipTimeout)
continue
if self.user_settings.systray_visible in (SYSTRAY_VISIBLE_HIDE_WHEN_INACTIVE, SYSTRAY_VISIBLE_HIDE_ALWAYS):
log.debug("Waiting to hide...")
QTimer.singleShot(HIDE_INACTIVE_DELAY, self.timeoutHideWhenInactive)
if event.event_code <= EVENT_MAX_USER_EVENT:
self.addDevice(event.device_uri)
self.setMenu()
if self.tray_icon.supportsMessages():
log.debug("Tray icon message:")
event.debug()
error_state = STATUS_TO_ERROR_STATE_MAP.get(event.event_code, ERROR_STATE_CLEAR)
desc = device.queryString(event.event_code)
show_message = False
if self.user_settings.systray_messages == SYSTRAY_MESSAGES_SHOW_ALL: # OK, Busy
show_message = True
elif self.user_settings.systray_messages in (SYSTRAY_MESSAGES_SHOW_ERRORS_AND_WARNINGS, SYSTRAY_MESSAGES_SHOW_ERRORS_ONLY):
if error_state == ERROR_STATE_ERROR:
show_message = True
elif self.user_settings.systray_messages == SYSTRAY_MESSAGES_SHOW_ERRORS_AND_WARNINGS and \
error_state in (ERROR_STATE_WARNING, ERROR_STATE_LOW_SUPPLIES, ERROR_STATE_LOW_PAPER):
show_message = True
if event.printer_name:
d = QString(event.printer_name)
else:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = \
device.parseDeviceURI(event.device_uri)
if bus == 'usb':
idd = serial
elif bus == 'net':
idd = host
elif bus == 'par':
idd = dev_file
else:
idd = 'unknown'
self.model = models.normalizeModelUIName(model)
if back_end == 'hp':
d = self.__tr("%1 Printer (%2)").arg(model).arg(idd)
elif back_end == 'hpaio':
d = self.__tr("%1 Scanner (%2)").arg(model).arg(idd)
elif back_end == 'hpfax':
d = self.__tr("%1 Fax (%2)").arg(model).arg(idd)
else:
d = self.__tr("%1 (%2)").arg(model).arg(idd)
if show_message:
if have_pynotify and pynotify.init("hplip"): # Use libnotify/pynotify
icon, urgency = ERROR_STATE_TO_ICON_AND_URGENCY_PYNOTIFY.get(error_state,
(getPynotifyIcon('info'), pynotify.URGENCY_NORMAL))
if event.job_id and event.title:
msg = "%s\n%s: %s\n(%s/%s)" % (unicode(d), desc, event.title, event.username, event.job_id)
log.debug("Notify: uri=%s desc=%s title=%s user=%s job_id=%d code=%d" %
(event.device_uri, desc, event.title, event.username, event.job_id, event.event_code))
else:
msg = "%s\n%s (%s)" % (unicode(d), desc, event.event_code)
log.debug("Notify: uri=%s desc=%s code=%d" % (event.device_uri, desc, event.event_code))
n = pynotify.Notification("HPLIP Device Status", msg, icon)
n.set_urgency(urgency)
if error_state == ERROR_STATE_ERROR:
n.set_timeout(pynotify.EXPIRES_NEVER)
else:
n.set_timeout(TRAY_MESSAGE_DELAY)
n.show()
else: # Use "standard" message bubbles
icon = ERROR_STATE_TO_ICON.get(error_state, QSystemTrayIcon.Information)
if event.job_id and event.title:
log.debug("Bubble: uri=%s desc=%s title=%s user=%s job_id=%d code=%d" %
(event.device_uri, desc, event.title, event.username, event.job_id, event.event_code))
self.tray_icon.showMessage(self.__tr("HPLIP Device Status"),
QString("%1\n%2: %3\n(%4/%5)").\
arg(d).\
arg(desc).arg(event.title).\
arg(event.username).arg(event.job_id),
icon, TRAY_MESSAGE_DELAY)
else:
log.debug("Bubble: uri=%s desc=%s code=%d" % (event.device_uri, desc, event.event_code))
self.tray_icon.showMessage(self.__tr("HPLIP Device Status"),
QString("%1\n%2 (%3)").arg(d).\
arg(desc).arg(event.event_code),
icon, TRAY_MESSAGE_DELAY)
else:
break
def NextButton_clicked(self):
if self.SkipRadioButton.isChecked():
log.debug("Skipping plug-in installation.")
self.close()
return
beginWaitCursor()
try:
if self.plugin_path: # User specified Path
if not self.plugin_path.startswith('http://'):
self.plugin_path = 'file://' + self.plugin_path
else:
log.info("Checking for network connection...")
ok = utils.check_network_connection()
if not ok:
log.error("Network connection not detected.")
endWaitCursor()
FailureUI(self, self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.plugin_path)
status, download_plugin_file = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
if status in (pluginhandler.PLUGIN_INSTALL_ERROR_UNABLE_TO_RECV_KEYS, pluginhandler.PLUGIN_INSTALL_ERROR_DIGITAL_SIGN_NOT_FOUND):
endWaitCursor()
if QMessageBox.question(self, self.__tr("Digital signature download failed"),
self.__tr("<b>The download of the digital signature file failed.</b><p>Without this file, it is not possible to authenticate and validate the plug-in prior to installation.</p>Do you still want to install the plug-in?"),
QMessageBox.Yes | QMessageBox.No) != QMessageBox.Yes:
self.pluginObj.deleteInstallationFiles(download_plugin_file)
self.close()
return
elif status != pluginhandler.PLUGIN_INSTALL_ERROR_NONE:
if status == pluginhandler.PLUGIN_INSTALL_ERROR_PLUGIN_FILE_NOT_FOUND:
desc = self.__tr("<b>ERROR: Plug-in file not found (server returned 404 or similar error)")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_DIGITAL_SIGN_BAD:
desc = self.__tr("<b>ERROR: Plug-in file does not match its digital signature.</b><p>File may have been corrupted or altered.")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_PLUGIN_FILE_CHECKSUM_ERROR:
desc = self.__tr("<b>ERROR: Plug-in file does not match its checksum. File may have been corrupted or altered.")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_NO_NETWORK:
desc = self.__tr("<b>ERROR: Unable to connect to network to download the plug-in.</b><p>Please check your network connection and try again.</p>")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_DIRECTORY_ERROR:
desc = self.__tr("<b>ERROR: Unable to create the plug-in directory.</b><p>Please check your permissions and try again.</p>")
self.pluginObj.deleteInstallationFiles(download_plugin_file)
endWaitCursor()
FailureUI(self, desc)
self.close()
return
if not self.pluginObj.run_plugin(download_plugin_file, GUI_MODE):
self.pluginObj.deleteInstallationFiles(download_plugin_file)
endWaitCursor()
FailureUI(self, self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = None
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
endWaitCursor()
FailureUI(self, self.__tr("<b>Firmware download to device failed.</b><p>%1</p>").arg(dev))
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
else:
endWaitCursor()
FailureUI(self, self.__tr("<b>Firmware download to device failed.</b><p>%1</p>").arg(dev))
finally:
if d is not None:
d.close()
finally:
endWaitCursor()
self.pluginObj.deleteInstallationFiles(download_plugin_file)
SuccessUI(self, self.__tr("<b>Plug-in installation successful</b>"))
self.result = True
self.close()
def notifierActivated(self, s):
m = ''
while True:
try:
r, w, e = select.select([self.read_pipe], [], [self.read_pipe], 1.0)
except select.error:
log.debug("Error in select()")
break
if e:
log.error("Pipe error: %s" % e)
break
if r:
#m = ''.join([m, os.read(self.read_pipe, self.fmt_size)])
m = os.read(self.read_pipe, self.fmt_size)
while len(m) >= self.fmt_size:
event = device.Event(*[x.rstrip(b'\x00').decode('utf-8') if isinstance(x, bytes) else x for x in struct.unpack(self.fmt, m[:self.fmt_size])])
m = m[self.fmt_size:]
if event.event_code == EVENT_CUPS_QUEUES_REMOVED or event.event_code == EVENT_CUPS_QUEUES_ADDED:
self.resetDevice()
for d in device.getSupportedCUPSDevices(back_end_filter=['hp', 'hpfax']):
self.addDevice(d)
self.setMenu()
if event.event_code == EVENT_USER_CONFIGURATION_CHANGED:
log.debug("Re-reading configuration (EVENT_USER_CONFIGURATION_CHANGED)")
self.user_settings.load()
self.user_settings.debug()
elif event.event_code == EVENT_SYSTEMTRAY_EXIT:
self.quit()
return
if self.user_settings.systray_visible in \
(SYSTRAY_VISIBLE_SHOW_ALWAYS, SYSTRAY_VISIBLE_HIDE_WHEN_INACTIVE):
log.debug("Showing...")
self.tray_icon.setVisible(True)
if event.event_code == EVENT_DEVICE_UPDATE_ACTIVE:
if not self.active_icon:
self.tray_icon.setIcon(self.prop_active_icon)
self.active_icon = True
continue
elif event.event_code == EVENT_DEVICE_UPDATE_INACTIVE:
if self.active_icon:
self.tray_icon.setIcon(self.prop_icon)
self.active_icon = False
continue
elif event.event_code == EVENT_DEVICE_UPDATE_BLIP:
if not self.active_icon:
self.tray_icon.setIcon(self.prop_active_icon)
self.active_icon = True
QTimer.singleShot(BLIP_DELAY, self.blipTimeout)
continue
if self.user_settings.systray_visible in (SYSTRAY_VISIBLE_HIDE_WHEN_INACTIVE, SYSTRAY_VISIBLE_HIDE_ALWAYS):
log.debug("Waiting to hide...")
QTimer.singleShot(HIDE_INACTIVE_DELAY, self.timeoutHideWhenInactive)
if event.event_code <= EVENT_MAX_USER_EVENT or \
event.event_code == EVENT_CUPS_QUEUES_REMOVED or event.event_code == EVENT_CUPS_QUEUES_ADDED:
if event.event_code != EVENT_CUPS_QUEUES_REMOVED:
self.addDevice(event.device_uri)
self.setMenu()
if self.tray_icon.supportsMessages():
log.debug("Tray icon message:")
event.debug()
error_state = STATUS_TO_ERROR_STATE_MAP.get(event.event_code, ERROR_STATE_CLEAR)
desc = device.queryString(event.event_code)
show_message = False
if self.user_settings.systray_messages == SYSTRAY_MESSAGES_SHOW_ALL: # OK, Busy
show_message = True
elif self.user_settings.systray_messages in (SYSTRAY_MESSAGES_SHOW_ERRORS_AND_WARNINGS, SYSTRAY_MESSAGES_SHOW_ERRORS_ONLY):
if error_state == ERROR_STATE_ERROR:
show_message = True
elif self.user_settings.systray_messages == SYSTRAY_MESSAGES_SHOW_ERRORS_AND_WARNINGS and \
error_state in (ERROR_STATE_WARNING, ERROR_STATE_LOW_SUPPLIES, ERROR_STATE_LOW_PAPER):
show_message = True
if event.printer_name:
d = event.printer_name
else:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = \
device.parseDeviceURI(event.device_uri)
if bus == 'usb':
idd = serial
elif bus == 'net':
idd = host
elif bus == 'par':
idd = dev_file
else:
idd = 'unknown'
self.model = models.normalizeModelUIName(model)
if back_end == 'hp':
d = self.__tr("%s Printer (%s)"%(model,idd))
elif back_end == 'hpaio':
d = self.__tr("%s Scanner (%s)"%(model,idd))
elif back_end == 'hpfax':
d = self.__tr("%s Fax (%s)"%(model,idd))
else:
d = self.__tr("%s (%s)"%(model,idd))
if show_message:
if have_pynotify and pynotify.init("hplip"): # Use libnotify/pynotify
icon, urgency = ERROR_STATE_TO_ICON_AND_URGENCY_PYNOTIFY.get(error_state,
(getPynotifyIcon('info'), pynotify.URGENCY_NORMAL))
if event.job_id and event.title:
msg = "%s\n%s: %s\n(%s/%s)" % (to_unicode(d), desc, event.title, event.username, event.job_id)
log.debug("Notify: uri=%s desc=%s title=%s user=%s job_id=%d code=%d" %
(event.device_uri, desc, event.title, event.username, event.job_id, event.event_code))
else:
msg = "%s\n%s (%s)" % (to_unicode(d), desc, event.event_code)
log.debug("Notify: uri=%s desc=%s code=%d" % (event.device_uri, desc, event.event_code))
n = pynotify.Notification("HPLIP Device Status", msg, icon)
# CRID: 11833 Debian Traceback error notification exceeded
n.set_hint('transient', True)
n.set_urgency(urgency)
if error_state == ERROR_STATE_ERROR:
n.set_timeout(pynotify.EXPIRES_NEVER)
else:
n.set_timeout(TRAY_MESSAGE_DELAY)
n.show()
else: # Use "standard" message bubbles
icon = ERROR_STATE_TO_ICON.get(error_state, QSystemTrayIcon.Information)
if event.job_id and event.title:
log.debug("Bubble: uri=%s desc=%s title=%s user=%s job_id=%d code=%d" %
(event.device_uri, desc, event.title, event.username, event.job_id, event.event_code))
self.tray_icon.showMessage(self.__tr("HPLIP Device Status"),
"%s\n%s: %s\n(%s/%s)"%(d,desc, event.title,event.username,event.job_id),
icon, TRAY_MESSAGE_DELAY)
else:
log.debug("Bubble: uri=%s desc=%s code=%d" % (event.device_uri, desc, event.event_code))
self.tray_icon.showMessage(self.__tr("HPLIP Device Status"),
"%s\n%s (%s)"%(d,desc,event.event_code),
icon, TRAY_MESSAGE_DELAY)
else:
break
elif status == core_install.PLUGIN_INSTALL_ERROR_NO_NETWORK:
desc = "Unable to connect to network to download the plug-in. Please check your network connection and try again."
elif status == core_install.PLUGIN_INSTALL_ERROR_DIRECTORY_ERROR:
desc = "Unable to create the plug-in directory. Please check your permissions and try again."
core.delete_plugin()
log.error(desc)
sys.exit(1)
tui.header("INSTALLING PLUG-IN")
core.run_plugin(mode, plugin_install_callback)
cups_devices = device.getSupportedCUPSDevices(['hp']) #, 'hpfax'])
#print cups_devices
title = False
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', 0):
if not title:
tui.header("DOWNLOADING FIRMWARE")
title = True
# Download firmware if needed
log.info(log.bold("\nDownloading firmware to device %s..." % dev))
cont, ans = tui.enter_yes_no(
"Do you still want to install the plug-in?", 'n')
if not cont or not ans:
pluginObj.deleteInstallationFiles(plugin_path)
clean_exit(0)
else:
pluginObj.deleteInstallationFiles(plugin_path)
clean_exit(1)
tui.header("INSTALLING PLUG-IN")
pluginObj.run_plugin(plugin_path, mode)
pluginObj.deleteInstallationFiles(plugin_path)
cups_devices = device.getSupportedCUPSDevices(['hp']) #, 'hpfax'])
#print cups_devices
title = False
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', 0):
if not title:
tui.header("DOWNLOADING FIRMWARE")
title = True
# Download firmware if needed
log.info(
def NextButton_clicked(self):
if self.SkipRadioButton.isChecked():
log.debug("Skipping plug-in installation.")
self.close()
return
beginWaitCursor()
try:
if self.plugin_path: # User specified Path
if not self.plugin_path.startswith('http://'):
self.plugin_path = 'file://' + self.plugin_path
else:
log.info("Checking for network connection...")
ok = utils.check_network_connection()
if not ok:
log.error("Network connection not detected.")
endWaitCursor()
FailureUI(self, self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.plugin_path)
status, download_plugin_file, error_str = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
if status in (ERROR_UNABLE_TO_RECV_KEYS, ERROR_DIGITAL_SIGN_NOT_FOUND):
endWaitCursor()
if QMessageBox.question(self, " ",
self.__tr("<b>%s</b><p>Without this, it is not possible to authenticate and validate the plug-in prior to installation.</p>Do you still want to install the plug-in?" %error_str),
QMessageBox.Yes | QMessageBox.No) != QMessageBox.Yes:
self.pluginObj.deleteInstallationFiles(download_plugin_file)
self.close()
return
elif status != ERROR_SUCCESS:
self.pluginObj.deleteInstallationFiles(download_plugin_file)
endWaitCursor()
FailureUI(self, error_str)
self.close()
return
if not self.pluginObj.run_plugin(download_plugin_file, GUI_MODE):
self.pluginObj.deleteInstallationFiles(download_plugin_file)
endWaitCursor()
FailureUI(self, self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = None
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
endWaitCursor()
FailureUI(self, self.__tr("<b>Firmware download to device failed.</b><p>%1</p>").arg(dev))
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
else:
endWaitCursor()
FailureUI(self, self.__tr("<b>Firmware download to device failed.</b><p>%1</p>").arg(dev))
finally:
if d is not None:
d.close()
finally:
endWaitCursor()
self.pluginObj.deleteInstallationFiles(download_plugin_file)
SuccessUI(self, self.__tr("<b>Plug-in installation successful</b>"))
self.result = True
self.close()
def NextButton_clicked(self):
if self.SkipRadioButton.isChecked():
log.debug("Skipping plug-in installation.")
self.close()
return
beginWaitCursor()
try:
if self.plugin_path: # User specified Path
if not self.plugin_path.startswith('http://'):
self.plugin_path = 'file://' + self.plugin_path
else:
log.info("Checking for network connection...")
ok = utils.check_network_connection()
if not ok:
log.error("Network connection not detected.")
endWaitCursor()
FailureUI(self, self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.plugin_path)
status, download_plugin_file, error_str = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
if status in (ERROR_UNABLE_TO_RECV_KEYS, ERROR_DIGITAL_SIGN_NOT_FOUND):
endWaitCursor()
if QMessageBox.question(self, " ",
self.__tr("<b>%s</b><p>Without this, it is not possible to authenticate and validate the plug-in prior to installation.</p>Do you still want to install the plug-in?" %error_str),
QMessageBox.Yes | QMessageBox.No, QMessageBox.No) != QMessageBox.Yes:
self.pluginObj.deleteInstallationFiles(download_plugin_file)
self.close()
return
elif status != ERROR_SUCCESS:
self.pluginObj.deleteInstallationFiles(download_plugin_file)
endWaitCursor()
FailureUI(self, error_str)
self.close()
return
if not self.pluginObj.run_plugin(download_plugin_file, GUI_MODE):
self.pluginObj.deleteInstallationFiles(download_plugin_file)
endWaitCursor()
FailureUI(self, self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = None
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
endWaitCursor()
FailureUI(self, self.__tr("<b>Firmware download to device failed.</b><p>%s</p>"%dev))
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
else:
endWaitCursor()
FailureUI(self, self.__tr("<b>Firmware download to device failed.</b><p>%s</p>"%dev))
finally:
if d is not None:
d.close()
finally:
endWaitCursor()
self.pluginObj.deleteInstallationFiles(download_plugin_file)
SuccessUI(self, self.__tr("<b>Plug-in installation successful</b>"))
self.result = True
self.close()
tui.header("PLUG-IN INSTALLATION")
hp_plugin = utils.which('hp-plugin')
if hp_plugin:
cmd = "hp-plugin -i"
if os_utils.execute(cmd) != 0:
log.error("Failed to install Plugin.")
log.error("The device you are trying to setup requires a binary plug-in. Some functionalities may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to install plug-ins.Visit http://hplipopensource.com for more infomation.")
clean_exit(1)
ppds = cups.getSystemPPDs()
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
for d in list(installed_print_devices.keys()):
for p in installed_print_devices[d]:
log.debug("found print queue '%s'" % p)
installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
for d in list(installed_fax_devices.keys()):
for f in installed_fax_devices[d]:
log.debug("found fax queue '%s'" % f)
# ******************************* PRINT QUEUE SETUP
if setup_print:
tui.header("PRINT QUEUE SETUP")
if not auto and print_uri in installed_print_devices:
def actionPushButton_clicked(self):
if self.path: # path
if not self.path.startswith('http://'):
self.path = 'file://' + self.path
else:
log.info("Checking for network connection...")
ok = utils.check_network_connection()
if not ok:
log.error("Network connection not detected.")
self.FailureUI(self.__tr("Network connection not detected."))
self.close()
return
log.info("Downloading plug-in from: %s" % self.path)
status, self.path = self.pluginObj.download(self.path, self.plugin_download_callback)
if status != pluginhandler.PLUGIN_INSTALL_ERROR_NONE:
if status == pluginhandler.PLUGIN_INSTALL_ERROR_PLUGIN_FILE_NOT_FOUND:
desc = self.__tr("<b>ERROR: Plug-in file not found (server returned 404 or similar error).")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_DIGITAL_SIGN_NOT_FOUND:
desc = self.__tr("<b>ERROR: Plug-in digital signature file not found (server returned 404 or similar error).")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_DIGITAL_SIGN_BAD:
desc = self.__tr("<b>ERROR: Plug-in file does not match its digital signature.</b><p>File may have been corrupted or altered.")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_PLUGIN_FILE_CHECKSUM_ERROR:
desc = self.__tr("<b>ERROR: Plug-in file does not match its checksum. File may have been corrupted or altered.")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_NO_NETWORK:
desc = self.__tr("<b>ERROR: Unable to connect to network to download the plug-in.</b><p>Please check your network connection and try again.</p>")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_DIRECTORY_ERROR:
desc = self.__tr("<b>ERROR: Unable to create the plug-in directory.</b><p>Please check your permissions and try again.</p>")
elif status == pluginhandler.PLUGIN_INSTALL_ERROR_UNABLE_TO_RECV_KEYS:
desc = self.__tr("<b>ERROR: Unable to download the public HPLIP keys from the keyserver.")
self.pluginObj.deleteInstallationFiles(self.path)
self.FailureUI(desc)
self.close()
return
if not self.pluginObj.run_plugin(self.path, GUI_MODE):
self.pluginObj.deleteInstallationFiles(self.path)
self.FailureUI(self.__tr("Plug-in install failed."))
self.close()
return
cups_devices = device.getSupportedCUPSDevices(['hp']) #, 'hpfax'])
for dev in cups_devices:
mq = device.queryModelByURI(dev)
if mq.get('fw-download', False):
# Download firmware if needed
log.info(log.bold("\nDownloading firmware to device %s..." % dev))
try:
d = device.Device(dev)
except Error:
log.error("Error opening device.")
continue
if d.downloadFirmware():
log.info("Firmware download successful.\n")
d.close()
self.pluginObj.deleteInstallationFiles(self.path)
self.SuccessUI("Plug-in install successful")
self.close()