def onStart(self, event):
if self.bbtether != None and self.bbtether.is_running():
dlg = wx.MessageDialog(self, "The modem is already Connected.",
"Warning!", wx.OK | wx.ICON_INFORMATION)
dlg.ShowModal()
dlg.Destroy()
return
# ask config to use
pppdconf = bb_prefs.get_def_string(bb_prefs.SECTION_MAIN,
"pppd_config", "")
# if none picked yet, ask and save in prefs for next time
if pppdconf == "":
choices = get_ppp_confs()
choices.append("--Do not start PPPD--")
evt = pickEvent(
caption="PPP config to use (EX: tmobile) see conf/ folder.",
choices=choices,
default=pppdconf)
pppconf = self.onPick(evt)
print "pppconf:" + str(pppconf)
if pppconf == None:
# cancelled
return
if pppconf == "--Do not start PPPD--":
pppconf = ""
bb_prefs.set(bb_prefs.SECTION_MAIN, "pppd_config", pppconf)
bb_prefs.save_prefs()
fake_args = self.build_args_from_prefs()
bb_messenging.log("Will run bbtether with args: " + str(fake_args))
(options, args) = bb_tether.parse_cmd(fake_args)
self.bbtether = BBTetherThread(options, args)
self.bbtether.start()
def set_data_mode(device):
bb_messenging.status("Switching Device to data only mode")
try:
buffer= [0,0]
device.handle.controlMsg(0xc0, 0xa9, buffer, 0 , 1)
except usb.USBError, error:
bb_messenging.log("Error setting device to data mode "+str(error)+", continuing anyway.")
def onStart(self, event):
if self.bbtether!=None and self.bbtether.is_running():
dlg = wx.MessageDialog(self, "The modem is already Connected.", "Warning!", wx.OK | wx.ICON_INFORMATION)
dlg.ShowModal()
dlg.Destroy()
return
# ask config to use
pppdconf=bb_prefs.get_def_string(bb_prefs.SECTION_MAIN, "pppd_config", "")
# if none picked yet, ask and save in prefs for next time
if pppdconf == "":
choices=get_ppp_confs()
choices.append("--Do not start PPPD--")
evt=pickEvent(caption="PPP config to use (EX: tmobile) see conf/ folder.",choices=choices,default=pppdconf)
pppconf=self.onPick(evt)
print "pppconf:"+str(pppconf)
if pppconf==None:
# cancelled
return
if pppconf == "--Do not start PPPD--":
pppconf=""
bb_prefs.set(bb_prefs.SECTION_MAIN,"pppd_config",pppconf)
bb_prefs.save_prefs()
fake_args=self.build_args_from_prefs()
bb_messenging.log("Will run bbtether with args: "+str(fake_args))
(options,args)=bb_tether.parse_cmd(fake_args)
self.bbtether = BBTetherThread(options, args)
self.bbtether.start()
def install_kextd():
bb_messenging.status('Installing custom Kernel Ext. File')
shutil.copytree(KEXT_FOLDER, "/System/Library/Extensions/libusbshield_rim.kext")
subprocess.call(['chown', 'root:wheel', "/System/Library/Extensions/libusbshield_rim.kext"])
subprocess.call(['kextload', '/System/Library/Extensions/libusbshield_rim.kext'])
restart_kextd()
bb_messenging.log("Warning: If the device still fails to claim an interface, you should reboot.")
def set_data_mode(device):
bb_messenging.status("Switching Device to data only mode")
try:
buffer = [0, 0]
device.handle.controlMsg(0xc0, 0xa9, buffer, 0, 1)
except usb.USBError, error:
bb_messenging.log("Error setting device to data mode " + str(error) +
", continuing anyway.")
def usb_write(device,endpt,bytes,timeout=TIMEOUT,msg="\t-> "):
bb_util.debug_bytes(bytes,msg)
try:
bb_util.debug2(">bulkwrite")
device.handle.bulkWrite(endpt, bytes, timeout)
bb_util.debug2("<bulkwrite")
except usb.USBError, error:
bb_util.debug2("<bulkwrite(exc)")
# ! osx returns an empty error (no errorno) so we justcan't check anything :-(
if str(error) != "No error" and not (bb_osx.is_osx() and error.errno == None):
bb_messenging.log("error: "+str(error))
raise
def read_prefs():
config = ConfigParser.RawConfigParser()
if os.path.isfile(PREF_FILE):
bb_messenging.log("ARchivo de preferencias "+PREF_FILE)
config.read(PREF_FILE)
else:
bb_messenging.log("Creando archivo de conf inicial "+PREF_FILE)
config.add_section(SECTION_MAIN)
# do not use save() to prevent recursion
configfile=open(PREF_FILE, 'wb')
config.write(configfile)
configfile.close()
return config
def usb_write(device, endpt, bytes, timeout=TIMEOUT, msg="\t-> "):
bb_util.debug_bytes(bytes, msg)
try:
bb_util.debug2(">bulkwrite")
device.handle.bulkWrite(endpt, bytes, timeout)
bb_util.debug2("<bulkwrite")
except usb.USBError, error:
bb_util.debug2("<bulkwrite(exc)")
# ! osx returns an empty error (no errorno) so we justcan't check anything :-(
if str(error) != "No error" and not (bb_osx.is_osx()
and error.errno == None):
bb_messenging.log("error: " + str(error))
raise
def read_prefs():
config = ConfigParser.RawConfigParser()
if os.path.isfile(PREF_FILE):
bb_messenging.log("Reading prefs from " + PREF_FILE)
config.read(PREF_FILE)
else:
bb_messenging.log("Creating initial config file " + PREF_FILE)
config.add_section(SECTION_MAIN)
# do not use save() to prevent recursion
configfile = open(PREF_FILE, 'wb')
config.write(configfile)
configfile.close()
return config
def read_prefs():
config = ConfigParser.RawConfigParser()
if os.path.isfile(PREF_FILE):
bb_messenging.log("Reading prefs from "+PREF_FILE)
config.read(PREF_FILE)
else:
bb_messenging.log("Creating initial config file "+PREF_FILE)
config.add_section(SECTION_MAIN)
# do not use save() to prevent recursion
configfile=open(PREF_FILE, 'wb')
config.write(configfile)
configfile.close()
return config
def usb_read(device,endpt,size=BUF_SIZE,timeout=TIMEOUT,msg="\t<- "):
bytes=[]
try:
bb_util.debug2(">bulkread")
bytes=device.handle.bulkRead(endpt, size, timeout)
bb_util.debug2("<bulkread")
bb_util.debug_bytes(bytes,msg)
except usb.USBError, error:
bb_util.debug2("<bulkread (exc)")
# ! osx returns an empty error (no errorno) so we justcan't check anything :-(
if str(error) != "No error" and not (bb_osx.is_osx() and error.errno == None):
bb_messenging.log("error: "+str(error))
raise
def install_kextd():
bb_messenging.status('Installing custom Kernel Ext. File')
shutil.copytree(KEXT_FOLDER,
"/System/Library/Extensions/libusbshield_rim.kext")
subprocess.call([
'chown', 'root:wheel',
"/System/Library/Extensions/libusbshield_rim.kext"
])
subprocess.call(
['kextload', '/System/Library/Extensions/libusbshield_rim.kext'])
restart_kextd()
bb_messenging.log(
"Warning: If the device still fails to claim an interface, you should reboot."
)
def usb_read(device, endpt, size=BUF_SIZE, timeout=TIMEOUT, msg="\t<- "):
bytes = []
try:
bb_util.debug2(">bulkread")
bytes = device.handle.bulkRead(endpt, size, timeout)
bb_util.debug2("<bulkread")
bb_util.debug_bytes(bytes, msg)
except usb.USBError, error:
bb_util.debug2("<bulkread (exc)")
# ! osx returns an empty error (no errorno) so we justcan't check anything :-(
if str(error) != "No error" and not (bb_osx.is_osx()
and error.errno == None):
bb_messenging.log("error: " + str(error))
raise
def set_bb_power(device):
'''
Added try / expect blocks as I had reports of failure(which ?) on storm 9500
'''
bb_messenging.status("Increasing USB power - for charging")
try:
buffer= [0,0]
device.handle.controlMsg(0xc0, 0xa5, buffer, 0 , 1)
buffer = []
device.handle.controlMsg(0x40, 0xA2, buffer, 0 , 1)
# reset
# reset()
bb_messenging.status("Increased USB power")
except usb.USBError, error:
bb_messenging.log("Error increasing power "+str(error)+", continuing anyway.")
def set_mode(device, command, password=''):
# TODO: always try ? but only send password if requested ?
bb_messenging.status("Switching Device to Desktop mode")
usb_write(device, device.writept, command)
data=usb_read(device,device.readpt)
if len(password) > 0:
bb_messenging.log("Trying to send Desktop mode password.")
usb_write(device, device.writept, COMMAND_PASS_START_CHLG)
data=usb_read(device,device.readpt)
if len(data) <=8 :
bb_messenging.log("No seed sent by device, probably doesn't need a password.")
else:
seed=data[9:]
digest=bb_modem.digest_password(seed,password)
print("digest: "+str(digest))
def set_bb_power(device):
'''
Added try / expect blocks as I had reports of failure(which ?) on storm 9500
'''
bb_messenging.status("Increasing USB power - for charging")
try:
buffer = [0, 0]
device.handle.controlMsg(0xc0, 0xa5, buffer, 0, 1)
buffer = []
device.handle.controlMsg(0x40, 0xA2, buffer, 0, 1)
# reset
# reset()
bb_messenging.status("Increased USB power")
except usb.USBError, error:
bb_messenging.log("Error increasing power " + str(error) +
", continuing anyway.")
def set_mode(device, command, password=''):
# TODO: always try ? but only send password if requested ?
bb_messenging.status("Switching Device to Desktop mode")
usb_write(device, device.writept, command)
data = usb_read(device, device.readpt)
if len(password) > 0:
bb_messenging.log("Trying to send Desktop mode password.")
usb_write(device, device.writept, COMMAND_PASS_START_CHLG)
data = usb_read(device, device.readpt)
if len(data) <= 8:
bb_messenging.log(
"No seed sent by device, probably doesn't need a password.")
else:
seed = data[9:]
digest = bb_modem.digest_password(seed, password)
print("digest: " + str(digest))
def run (self):
bb_messenging.status("Starting Network Stats thread")
modem=self.frame.bbtether.bbtether.modem;
lastIn=0
lastOut=0
maxIn=0
maxOut=0
while(True):
time.sleep(1)
if modem==None or self.done:
self.done=True
break;
try:
totalDown=modem.red
totalUp=modem.writ
newIn=totalUp-lastIn
newOut=totalDown-lastOut
lastIn=totalUp
lastOut=totalDown
elapsed=time.time()-self.start_time
if newIn > maxIn:
maxIn=newIn
if newOut > maxOut:
maxOut=newOut
evt = networkStatsEvent(
#TODO: hours
elapsed=elapsed,
speedUp=newIn*8/1024,
speedDown=newOut*8/1024,
avgUp=totalUp*8/1024/elapsed,
avgDown=totalDown*8/1024/elapsed,
maxDown=maxOut*8/1024,
maxUp=maxIn*8/1024,
totalUp=totalUp/1024,
totalDown=totalDown/1024
)
wx.PostEvent(self.frame, evt)
except:
raise
bb_messenging.log("Network stats thread error.")
self.done=True
bb_messenging.log("Network stats thread completed.")
def run(self):
bb_messenging.status("Starting Network Stats thread")
modem = self.frame.bbtether.bbtether.modem
lastIn = 0
lastOut = 0
maxIn = 0
maxOut = 0
while (True):
time.sleep(1)
if modem == None or self.done:
self.done = True
break
try:
totalDown = modem.red
totalUp = modem.writ
newIn = totalUp - lastIn
newOut = totalDown - lastOut
lastIn = totalUp
lastOut = totalDown
elapsed = time.time() - self.start_time
if newIn > maxIn:
maxIn = newIn
if newOut > maxOut:
maxOut = newOut
evt = networkStatsEvent(
#TODO: hours
elapsed=elapsed,
speedUp=newIn * 8 / 1024,
speedDown=newOut * 8 / 1024,
avgUp=totalUp * 8 / 1024 / elapsed,
avgDown=totalDown * 8 / 1024 / elapsed,
maxDown=maxOut * 8 / 1024,
maxUp=maxIn * 8 / 1024,
totalUp=totalUp / 1024,
totalDown=totalDown / 1024)
wx.PostEvent(self.frame, evt)
except:
raise
bb_messenging.log("Network stats thread error.")
self.done = True
bb_messenging.log("Network stats thread completed.")
def find_berry(userdev=None, userbus=None, verbose=True):
'''
Look on Bus for a RIM device
(1 max for now)
userdev,userbus : potential user provided device/bus to force-use
'''
device = None
mybus = None
bb_messenging.status("Looking for USB devices:")
berry = None
if userdev and userbus:
if verbose:
bb_messenging.log("Will use user provided bus/device: " + userbus +
"/" + userdev)
for bus in usb.busses():
if string.atoi(bus.dirname) == string.atoi(userbus):
for dev in bus.devices:
if string.atoi(dev.filename) == string.atoi(userdev):
berry = dev
mybus = bus
else:
for bus in usb.busses():
for dev in bus.devices:
if (verbose):
bb_messenging.log(" Bus %s Device %s: ID %04x:%04x" %
(bus.dirname, dev.filename, dev.idVendor,
dev.idProduct))
if (dev.idVendor == VENDOR_RIM):
berry = dev
mybus = bus
if berry != None:
device = bb_data.Device()
device.usbdev = berry
device.bus = mybus
if verbose:
bb_messenging.log("USB Device lookup finished")
return device
def find_berry(userdev=None, userbus=None, verbose=True):
'''
Look on Bus for a RIM device
(1 max for now)
userdev,userbus : potential user provided device/bus to force-use
'''
device=None
mybus=None
bb_messenging.status("Looking for USB devices:")
berry=None
if userdev and userbus:
if verbose :
bb_messenging.log("Will use user provided bus/device: "+userbus+"/"+userdev)
for bus in usb.busses():
if string.atoi(bus.dirname) == string.atoi(userbus):
for dev in bus.devices:
if string.atoi(dev.filename) == string.atoi(userdev):
berry=dev
mybus=bus
else:
for bus in usb.busses():
for dev in bus.devices:
if(verbose):
bb_messenging.log(" Bus %s Device %s: ID %04x:%04x" % (bus.dirname,dev.filename,dev.idVendor,dev.idProduct))
if(dev.idVendor==VENDOR_RIM):
berry=dev
mybus=bus
if berry != None:
device=bb_data.Device()
device.usbdev=berry
device.bus=mybus
if verbose :
bb_messenging.log("USB Device lookup finished")
return device
def read_bb_endpoints(device, userInterface):
'''
Read the device endpoints and stores them in the device data structure
device was created from find_berry
and device.open_handle should have been called already
Once we found endpoints, we save them as some devices (esp. Bold) don't like being probed.
'''
#look for previously saved endpoints
config = bb_prefs.get_prefs()
if config.has_section(SECTION_SCANNED_EP):
device.interface = bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,
'interface', -1)
device.readpt = bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,
'readpt', -1)
device.writept = bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,
'writept', -1)
device.modem_readpt = bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,
'modem_readpt', -1)
device.modem_writept = bb_prefs.get_def_int(
bb_prefs.SECTION_SCANNED_EP, 'modem_writept', -1)
bb_messenging.log("Using saved EP data: " + str(device.interface) +
", " + str(device.readpt) + ", " +
str(device.writept) + ", " +
str(device.modem_readpt) + ", " +
str(device.modem_writept))
# return saved data if good (earlier version saved bad ones)
if device.readpt != -1 and device.writept != -1:
return device
else:
print "Invalid saved endpoints, will rescan."
readpt = -1
writept = -1
modem_readpt = -1
modem_writept = -1
next_readpt = -1
next_writept = -1
# List device Infos for information and find USB endpair
handle = device.handle
berry = device.usbdev
config = berry.configurations[0]
type = ""
if (berry.idProduct == PRODUCT_DATA):
type = "Data Mode"
if (berry.idProduct == PRODUCT_NEW_DUAL):
type = "Dual Mode"
if (berry.idProduct == PRODUCT_NEW_8120):
type = "8120"
if (berry.idProduct == PRODUCT_NEW_MASS_ONLY):
type = "Storage Mode"
bb_messenging.log("\nFound RIM device (" + type + ")")
bb_messenging.log(" Manufacturer:" +
handle.getString(berry.iManufacturer, 100))
bb_messenging.log(" Product:" + handle.getString(berry.iProduct, 100))
#print " Serial:",handle.getString(berry.iSerialNumber,100)
bb_messenging.log(" Device:" + berry.filename)
bb_messenging.log(" VendorId: %04x" % berry.idVendor)
bb_messenging.log(" ProductId: %04x" % berry.idProduct)
bb_messenging.log(" Version:" + berry.deviceVersion)
bb_messenging.log(" Class:" + str(berry.deviceClass) + " " +
str(berry.deviceSubClass))
bb_messenging.log(" Protocol:" + str(berry.deviceProtocol))
bb_messenging.log(" Max packet size:" + str(berry.maxPacketSize))
bb_messenging.log(" Self Powered:" + str(config.selfPowered))
bb_messenging.log(" Max Power:" + str(config.maxPower))
for inter in config.interfaces:
if len(inter) == 0:
bb_messenging.log("Skipping Interface -> empty array !")
continue
bb_messenging.log("\n *Interface:" + str(inter[0].interfaceNumber))
if userInterface != None and int(
userInterface) != inter[0].interfaceNumber:
bb_messenging.log("Skipping interface (-i flag used)")
continue
if readpt != -1:
bb_messenging.log(
"Skipping interface (valid endpoints already found), use -i flag to force"
)
continue
try:
try:
handle.claimInterface(inter[0].interfaceNumber)
except usb.USBError, error:
bb_messenging.log("Failed to claim interface: " + str(error) +
"\nMust be in use.")
if not bb_osx.is_osx():
#Only implemented on libusb Linux !
#For mac we need the kext stuff.
bb_messenging.log("Will try to release it.")
detach_kernel_driver(device, inter[0].interfaceNumber)
try:
handle.claimInterface(inter[0].interfaceNumber)
bb_messenging.log("Interface is now claimed !")
except usb.USBError, error:
bb_messenging.log(
"Still could not claim the interface: " +
str(error))
bb_messenging.log(" Interface class:" +
str(inter[0].interfaceClass) + "/" +
str(inter[0].interfaceSubClass))
bb_messenging.log(" Interface protocol:" +
str(inter[0].interfaceProtocol))
for att in inter:
i = 0
# check endpoint pairs
while i < len(att.endpoints):
isDataPair = False
red = att.endpoints[i].address
writ = att.endpoints[i + 1].address
i += 2
bb_messenging.log(" EndPoint Pair:" + hex(red) +
"/" + hex(writ))
try:
usb_write(device, writ, COMMAND_HELLO)
try:
bytes = usb_read(device, red)
if len(bytes) == 0:
raise usb.USBError
# on some devices, the modem replies to hello with (others, read fails):
# [0x7 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x78 0x56 0x34 0x12 ] [........xV4.]
if bb_util.is_same_tuple(bytes, MODEM_HELLO_REPLY):
if modem_readpt == -1:
modem_readpt = red
modem_writept = writ
bb_messenging.log(
" Found Modem endpoints: " +
hex(red) + "/" + hex(writ))
else:
if readpt == -1:
# Use first valid data point found
device.interface = inter[0].interfaceNumber
bb_util.debug("Setting interface to: " +
str(device.interface))
readpt = red
writept = writ
isDataPair = True
bb_messenging.log(
" Found Data endpoints: " +
hex(red) + "/" + hex(writ))
except usb.USBError:
bb_messenging.log(
" Not Data Pair (Read failed)")
except usb.USBError:
bb_messenging.log(
" Not Data Pair (Write failed)")
if (isDataPair
== False) and readpt != -1 and next_readpt == -1:
next_readpt = red
next_writept = writ
bb_messenging.log(" Next endpoints:" +
hex(red) + "/" + hex(writ))
handle.releaseInterface()
def debug_object_attr(obj):
attributes = dir(obj)
for a in attributes:
bb_messenging.log(a)
bb_messenging.log(
" Not Data Pair (Read failed)")
except usb.USBError:
bb_messenging.log(
" Not Data Pair (Write failed)")
if (isDataPair
== False) and readpt != -1 and next_readpt == -1:
next_readpt = red
next_writept = writ
bb_messenging.log(" Next endpoints:" +
hex(red) + "/" + hex(writ))
handle.releaseInterface()
except usb.USBError:
bb_messenging.log("Error while scanning interface: " +
str(inter[0].interfaceNumber) + " -> skipping")
traceback.print_exc(file=sys.stdout)
# if no specific modem port found, try the one after the data one
if modem_readpt == -1:
modem_readpt = next_readpt
modem_writept = next_writept
bb_messenging.log("Defaulted Modem endpoints: " + hex(modem_readpt) +
"/" + hex(modem_writept))
device.readpt = readpt
device.writept = writept
device.modem_readpt = modem_readpt
device.modem_writept = modem_writept
#save scan results to file (only if found)
def start(self, options, args):
bb_messenging.verbose = options.verbose
bb_messenging.veryVerbose = options.veryverbose
if(options.rescan):
prefs=bb_prefs.get_prefs()
prefs.remove_section(bb_prefs.SECTION_SCANNED_EP)
pppConfig = None
if len(args) > 0:
pppConfig = args[0]
# Need to be root (unless udev or OSX)
#if os.getuid() != 0:
# bb_messenging.log("\n!!!!!!!!!!!!!!!!!!!!!\nThis might will only work as root!\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n")
bb_util.remove_berry_charge()
bb_osx.prepare_osx()
berry = None
berry = bb_usb.find_berry(options.device, options.bus)
if berry != None:
# open the connection
if berry.handle==None:
berry.open_handle()
#bb_usbfs.find_kernel_driver(berry)
# lookup endpoints
# IMPORTANT: We need to do this BEFORE RESET, otherwise modem will be screwed
# folowing "test" hello packet (fail on Pearl, ok on storm)
# all right on the Bold the hello packet also causes problem, but reset won't fix it :-(
if not (options.drp and options.dwp and options.mrp and options.mwp):
berry.read_endpoints(options.interface)
if options.listonly:
bb_messenging.warn(["Fin."])
bb_osx.terminate_osx()
os._exit(0)
bb_util.remove_berry_charge()
# set power & reset (only if '-c' requested)
# Only needed with BB os < 4.5 ?
if options.charge:
bb_usb.set_bb_power(berry)
bb_messenging.status("Waiting few seconds, for mode to change")
time.sleep(1.5)
# set to datamode (ony if requested)
if options.dmode:
bb_usb.set_data_mode(berry)
#if options.password != None and len(options.password) > 0:
# bb_usb.set_desktop_mode(berry,options.password)
# overwrite found endpoints with user endpoints if specified
if options.drp:
berry.readpt = int(options.drp, 16)
if options.dwp:
berry.writept = int(options.dwp, 16)
if options.mrp:
berry.modem_readpt = int(options.mrp, 16)
if options.mwp:
berry.modem_writept = int(options.mwp, 16)
if options.interface:
berry.interface = int(options.interface)
if berry.readpt == -1:
bb_messenging.warn(["\nNo good Data Endpoint pair, bailing out !"])
else:
bb_messenging.log("\nUsing Data Endpoint Pair:"+ hex(berry.readpt)+ "/"+ hex(berry.writept))
bb_messenging.log("Using Modem pair: "+ hex(berry.modem_readpt)+ "/"+ hex(berry.modem_writept)+ "\n")
bb_messenging.log("Atachando la interface "+str(berry.interface))
berry.claim_interface()
berry.read_infos()
bb_messenging.log("Pin: "+ hex(berry.pin))
bb_messenging.log("Description: "+ berry.desc)
# Modem use does not require to be in desktop mode, so don't do it.
self.modem = bb_modem.BBModem(berry)
if options.password:
self.modem.set_password(options.password)
pppdCommand = "/usr/sbin/pppd";
if options.pppd:
pppdCommand = options.pppd
# El desktop manager de windows hace esto, pero parce que es innecesario ya que igual funciona
# asi que no lo voy a incluir en el paquete de datos
#bb_usb.usb_write(berry, berry.writept, bb_modem.MODEM_BYPASS_PCKT)
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0,0,0x8,0,0xa,0x6,0,0xa])
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0x6,0,0xa,0,0x40,0,0,0x1,0,0])
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept,[0x6,0,0x16,0,0x40,0x1,0x1,0x2,0,0,0,0xa,0x49,0,0,0,0,0x49,0,0,0,0x1])
#bb_usb.usb_read(berry, berry.readpt)
# This will run forever (until ^C)
try:
self.modem.start(pppConfig, pppdCommand)
except KeyboardInterrupt:
bb_messenging.log("KBD interrupt")
# sometimes the KInterrupt will propagate here(if ^C before modem read thread started)
# we don't want to crash and hang.
if self.modem!=None:
self.modem.do_shutdown()
bb_messenging.status("MSG:Liberando la interfaz")
berry.release_interface()
bb_osx.terminate_osx()
bb_messenging.status("END:LinBerryModem Finalizado")
#os._exit(0)
else:
bb_messenging.warn(["\nERR:No hay BlackBerry Conectado!"])
def debug_object_attr(obj): attributes = dir(obj) for a in attributes: bb_messenging.log(a)
def start(self, options, args):
bb_messenging.verbose = options.verbose
bb_messenging.veryVerbose = options.veryverbose
if (options.rescan):
prefs = bb_prefs.get_prefs()
prefs.remove_section(bb_prefs.SECTION_SCANNED_EP)
pppConfig = None
if len(args) > 0:
pppConfig = args[0]
# Need to be root (unless udev or OSX)
if os.getuid() != 0:
bb_messenging.log(
"\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\nThis might will only work as root!\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
)
bb_util.remove_berry_charge()
bb_osx.prepare_osx()
berry = None
berry = bb_usb.find_berry(options.device, options.bus)
if berry != None:
# open the connection
if berry.handle == None:
berry.open_handle()
#bb_usbfs.find_kernel_driver(berry)
# lookup endpoints
# IMPORTANT: We need to do this BEFORE RESET, otherwise modem will be screwed
# folowing "test" hello packet (fail on Pearl, ok on storm)
# all right on the Bold the hello packet also causes problem, but reset won't fix it :-(
if not (options.drp and options.dwp and options.mrp
and options.mwp):
berry.read_endpoints(options.interface)
if options.listonly:
bb_messenging.warn(["Listing only requested, stopping here."])
bb_osx.terminate_osx()
os._exit(0)
bb_util.remove_berry_charge()
# set power & reset (only if '-c' requested)
# Only needed with BB os < 4.5 ?
if options.charge:
bb_usb.set_bb_power(berry)
bb_messenging.status("Waiting few seconds, for mode to change")
time.sleep(1.5)
# set to datamode (ony if requested)
if options.dmode:
bb_usb.set_data_mode(berry)
#if options.password != None and len(options.password) > 0:
# bb_usb.set_desktop_mode(berry,options.password)
# overwrite found endpoints with user endpoints if specified
if options.drp:
berry.readpt = int(options.drp, 16)
if options.dwp:
berry.writept = int(options.dwp, 16)
if options.mrp:
berry.modem_readpt = int(options.mrp, 16)
if options.mwp:
berry.modem_writept = int(options.mwp, 16)
if options.interface:
berry.interface = int(options.interface)
if berry.readpt == -1:
bb_messenging.warn(
["\nNo good Data Endpoint pair, bailing out !"])
else:
bb_messenging.log("\nUsing Data Endpoint Pair:" +
hex(berry.readpt) + "/" + hex(berry.writept))
bb_messenging.log("Using Modem pair: " +
hex(berry.modem_readpt) + "/" +
hex(berry.modem_writept) + "\n")
bb_messenging.log("Claiming interface " + str(berry.interface))
berry.claim_interface()
berry.read_infos()
bb_messenging.log("Pin: " + hex(berry.pin))
bb_messenging.log("Description: " + berry.desc)
# Modem use does not require to be in desktop mode, so don't do it.
self.modem = bb_modem.BBModem(berry)
if options.password:
self.modem.set_password(options.password)
pppdCommand = "/usr/sbin/pppd"
if options.pppd:
pppdCommand = options.pppd
# Windows does this, however it does not seem to be required (seem to crash usb at times too)
#bb_usb.usb_write(berry, berry.writept, bb_modem.MODEM_BYPASS_PCKT)
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0,0,0x8,0,0xa,0x6,0,0xa])
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0x6,0,0xa,0,0x40,0,0,0x1,0,0])
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0x6,0,0x16,0,0x40,0x1,0x1,0x2,0,0,0,0xa,0x49,0,0,0,0,0x49,0,0,0,0x1])
#bb_usb.usb_read(berry, berry.readpt)
# This will run forever (until ^C)
try:
self.modem.start(pppConfig, pppdCommand)
except KeyboardInterrupt:
bb_messenging.log("KBD interrupt")
# sometimes the KInterrupt will propagate here(if ^C before modem read thread started)
# we don't want to crash and hang.
if self.modem != None:
self.modem.do_shutdown()
bb_messenging.status("Releasing interface")
berry.release_interface()
bb_osx.terminate_osx()
bb_messenging.status("bbtether completed.")
#os._exit(0)
else:
bb_messenging.warn(["\nNo RIM device found"])
def __init__(self):
bb_messenging.log("")
def __init__(self):
bb_messenging.log("--------------------------------")
bb_messenging.log("BBTether " + VERSION)
bb_messenging.log("Israel Marrero - 2009")
bb_messenging.log("Israel Marrero")
bb_messenging.log("Use '-h' flag for more informations : 'python bbtether.py -h'.")
bb_messenging.log("--------------------------------\n")
def run(self):
bb_messenging.status("Starting Modem thread")
# runs "forever"
self.bbtether = bb_tether.BBTether()
self.bbtether.start(self.options, self.args)
bb_messenging.log("BBTether Thread completed.")
writept=writ
isDataPair=True
bb_messenging.log(" Found Data endpoints: "+hex(red)+"/"+hex(writ))
except usb.USBError:
bb_messenging.log(" Not Data Pair (Read failed)")
except usb.USBError:
bb_messenging.log(" Not Data Pair (Write failed)")
if (isDataPair==False) and readpt != -1 and next_readpt == -1:
next_readpt=red
next_writept=writ
bb_messenging.log(" Next endpoints:"+hex(red)+"/"+hex(writ))
handle.releaseInterface()
except usb.USBError:
bb_messenging.log("Error while scanning interface: "+str(inter[0].interfaceNumber)+" -> skipping")
traceback.print_exc(file=sys.stdout)
# if no specific modem port found, try the one after the data one
if modem_readpt==-1:
modem_readpt=next_readpt
modem_writept=next_writept
bb_messenging.log("Defaulted Modem endpoints: "+hex(modem_readpt)+"/"+hex(modem_writept))
device.readpt=readpt
device.writept=writept
device.modem_readpt=modem_readpt
device.modem_writept=modem_writept
#save scan results to file (only if found)
if writept!=-1:
def start(self, options, args):
bb_messenging.verbose = True
# Need to be root (unless udev or OSX)
if os.getuid() != 0:
bb_messenging.log(
"\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\nThis might will only work as root!\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
)
bb_util.remove_berry_charge()
bb_osx.prepare_osx()
berry = None
berry = bb_usb.find_berry(None, None)
if berry != None:
# open the connection
if berry.handle == None:
berry.open_handle()
berry.read_endpoints(None)
bb_util.remove_berry_charge()
if berry.readpt == -1:
bb_messenging.warn(
["\nNo good Data Endpoint pair, bailing out !"])
else:
bb_messenging.log("\nUsing Data Endpoint Pair:" +
hex(berry.readpt) + "/" + hex(berry.writept))
bb_messenging.log("Using Modem pair: " +
hex(berry.modem_readpt) + "/" +
hex(berry.modem_writept) + "\n")
bb_messenging.log("Claiming interface " + str(berry.interface))
berry.claim_interface()
berry.read_infos()
bb_messenging.log("Pin: " + hex(berry.pin))
bb_messenging.log("Description: " + berry.desc)
bb_usb.set_mode(berry, bb_usb.COMMAND_MODE_DESKTOP)
bb_usb.usb_read(berry, berry.readpt)
bb_usb.usb_write(berry, berry.writept,
[00, 00, 0x7, 00, 0xa, 04, 00])
bb_usb.usb_read(berry, berry.readpt)
bb_usb.usb_write(
berry, berry.writept,
[04, 00, 0xc, 00, 0x40, 00, 00, 00, 0x25, 0x80, 0x8, 00])
bb_usb.usb_read(berry, berry.readpt)
time.sleep(2)
bb_usb.usb_read(berry, berry.readpt)
else:
bb_messenging.warn(["\nNo RIM device found"])
def __init__(self):
bb_messenging.log("--------------------------------")
bb_messenging.log("BBTether " + VERSION)
bb_messenging.log("Thibaut Colar - 2009")
bb_messenging.log("More infos: http://wiki.colar.net/bbtether")
bb_messenging.log("Use '-h' flag for more informations : 'python bbtether.py -h'.")
bb_messenging.log("--------------------------------\n")
def start(self, options, args):
bb_messenging.verbose = True
# Need to be root (unless udev or OSX)
if os.getuid() != 0:
bb_messenging.log("\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\nThis might will only work as root!\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n")
bb_util.remove_berry_charge()
bb_osx.prepare_osx()
berry = None
berry = bb_usb.find_berry(None,None)
if berry != None:
# open the connection
if berry.handle==None:
berry.open_handle()
berry.read_endpoints(None)
bb_util.remove_berry_charge()
if berry.readpt == -1:
bb_messenging.warn(["\nNo good Data Endpoint pair, bailing out !"])
else:
bb_messenging.log("\nUsing Data Endpoint Pair:"+ hex(berry.readpt)+ "/"+ hex(berry.writept))
bb_messenging.log("Using Modem pair: "+ hex(berry.modem_readpt)+ "/"+ hex(berry.modem_writept)+ "\n")
bb_messenging.log("Claiming interface "+str(berry.interface))
berry.claim_interface()
berry.read_infos()
bb_messenging.log("Pin: "+ hex(berry.pin))
bb_messenging.log("Description: "+ berry.desc)
bb_usb.set_mode(berry,bb_usb.COMMAND_MODE_DESKTOP)
bb_usb.usb_read(berry,berry.readpt)
bb_usb.usb_write(berry,berry.writept,[00,00,0x7,00,0xa,04,00])
bb_usb.usb_read(berry,berry.readpt)
bb_usb.usb_write(berry,berry.writept,[04,00,0xc,00,0x40,00,00,00,0x25,0x80,0x8,00])
bb_usb.usb_read(berry,berry.readpt)
time.sleep(2)
bb_usb.usb_read(berry,berry.readpt)
else:
bb_messenging.warn(["\nNo RIM device found"])
def read_bb_endpoints(device, userInterface):
'''
Read the device endpoints and stores them in the device data structure
device was created from find_berry
and device.open_handle should have been called already
Once we found endpoints, we save them as some devices (esp. Bold) don't like being probed.
'''
#look for previously saved endpoints
config=bb_prefs.get_prefs()
if config.has_section(SECTION_SCANNED_EP):
device.interface=bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,'interface',-1)
device.readpt=bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,'readpt',-1)
device.writept=bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,'writept',-1)
device.modem_readpt=bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,'modem_readpt',-1)
device.modem_writept=bb_prefs.get_def_int(bb_prefs.SECTION_SCANNED_EP,'modem_writept',-1)
bb_messenging.log("Using saved EP data: "+str(device.interface)+", "+str(device.readpt)+", "+str(device.writept)+", "+str(device.modem_readpt)+", "+str(device.modem_writept))
# return saved data if good (earlier version saved bad ones)
if device.readpt != -1 and device.writept !=-1:
return device
else:
print "Invalid saved endpoints, will rescan."
readpt=-1
writept=-1
modem_readpt=-1
modem_writept=-1
next_readpt=-1
next_writept=-1
# List device Infos for information and find USB endpair
handle=device.handle
berry=device.usbdev
config=berry.configurations[0]
type=""
if(berry.idProduct == PRODUCT_DATA):
type="Data Mode"
if(berry.idProduct == PRODUCT_NEW_DUAL):
type="Dual Mode"
if(berry.idProduct == PRODUCT_NEW_8120):
type="8120"
if(berry.idProduct == PRODUCT_NEW_MASS_ONLY):
type="Storage Mode"
bb_messenging.log("\nFound RIM device ("+type+")")
bb_messenging.log(" Manufacturer:"+handle.getString(berry.iManufacturer,100))
bb_messenging.log(" Product:"+handle.getString(berry.iProduct,100))
#print " Serial:",handle.getString(berry.iSerialNumber,100)
bb_messenging.log(" Device:"+berry.filename)
bb_messenging.log(" VendorId: %04x" % berry.idVendor)
bb_messenging.log(" ProductId: %04x" % berry.idProduct)
bb_messenging.log(" Version:"+berry.deviceVersion)
bb_messenging.log(" Class:"+str(berry.deviceClass)+" "+str(berry.deviceSubClass))
bb_messenging.log(" Protocol:"+str(berry.deviceProtocol))
bb_messenging.log(" Max packet size:"+str(berry.maxPacketSize))
bb_messenging.log(" Self Powered:"+str(config.selfPowered))
bb_messenging.log(" Max Power:"+str(config.maxPower))
for inter in config.interfaces:
if len(inter) == 0:
bb_messenging.log("Skipping Interface -> empty array !")
continue
bb_messenging.log("\n *Interface:"+str(inter[0].interfaceNumber))
if userInterface!=None and int(userInterface)!=inter[0].interfaceNumber:
bb_messenging.log("Skipping interface (-i flag used)")
continue
if readpt != -1:
bb_messenging.log("Skipping interface (valid endpoints already found), use -i flag to force")
continue
try:
try:
handle.claimInterface(inter[0].interfaceNumber)
except usb.USBError, error:
bb_messenging.log("Failed to claim interface: "+str(error)+"\nMust be in use.")
if not bb_osx.is_osx():
#Only implemented on libusb Linux !
#For mac we need the kext stuff.
bb_messenging.log("Will try to release it.")
detach_kernel_driver(device,inter[0].interfaceNumber)
try:
handle.claimInterface(inter[0].interfaceNumber)
bb_messenging.log("Interface is now claimed !")
except usb.USBError, error:
bb_messenging.log("Still could not claim the interface: "+str(error))
bb_messenging.log(" Interface class:"+str(inter[0].interfaceClass)+"/"+str(inter[0].interfaceSubClass))
bb_messenging.log(" Interface protocol:"+str(inter[0].interfaceProtocol))
for att in inter:
i=0
# check endpoint pairs
while i < len(att.endpoints):
isDataPair=False
red=att.endpoints[i].address
writ=att.endpoints[i+1].address
i+=2
bb_messenging.log(" EndPoint Pair:"+hex(red)+"/"+hex(writ))
try:
usb_write(device,writ,COMMAND_HELLO)
try:
bytes=usb_read(device,red)
if len(bytes) == 0:
raise usb.USBError
# on some devices, the modem replies to hello with (others, read fails):
# [0x7 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x78 0x56 0x34 0x12 ] [........xV4.]
if bb_util.is_same_tuple(bytes, MODEM_HELLO_REPLY):
if modem_readpt==-1:
modem_readpt=red
modem_writept=writ
bb_messenging.log(" Found Modem endpoints: "+hex(red)+"/"+hex(writ))
else:
if readpt == -1 :
# Use first valid data point found
device.interface=inter[0].interfaceNumber
bb_util.debug("Setting interface to: "+str(device.interface))
readpt=red
writept=writ
isDataPair=True
bb_messenging.log(" Found Data endpoints: "+hex(red)+"/"+hex(writ))
except usb.USBError:
bb_messenging.log(" Not Data Pair (Read failed)")
except usb.USBError:
bb_messenging.log(" Not Data Pair (Write failed)")
if (isDataPair==False) and readpt != -1 and next_readpt == -1:
next_readpt=red
next_writept=writ
bb_messenging.log(" Next endpoints:"+hex(red)+"/"+hex(writ))
handle.releaseInterface()
def run (self):
bb_messenging.status("Starting Modem thread")
# runs "forever"
self.bbtether = bb_tether.BBTether()
self.bbtether.start(self.options, self.args)
bb_messenging.log("BBTether Thread completed.")
def __init__(self):
bb_messenging.log("--------------------------------")
bb_messenging.log("BBTether " + VERSION)
bb_messenging.log("Thibaut Colar - 2009")
bb_messenging.log("More infos: http://wiki.colar.net/bbtether")
bb_messenging.log(
"Use '-h' flag for more informations : 'python bbtether.py -h'.")
bb_messenging.log("--------------------------------\n")
