def demo_public_to_address(public_key, hex_compressed_public_key):
    # 计算地址
    # 传入公钥坐标对象/十六进制公钥值,输出同样的地址
    # 传入压缩公钥值,输出与⬆️不同的地址
    address = bitcoin.pubkey_to_address(public_key)
    compressed_address = bitcoin.pubkey_to_address(hex_compressed_public_key)
    return address, compressed_address
Пример #2
0
def run():
    global num_btc_wallets_searched
    # while True:
    valid_private_key = False
    while not valid_private_key:
        private_key = bitcoin.random_key()
        decoded_private_key = bitcoin.decode_privkey(private_key, 'hex')
        valid_private_key = 0 < decoded_private_key < bitcoin.N

    wif_encoded_private_key = bitcoin.encode_privkey(decoded_private_key,
                                                     'wif')
    public_key = bitcoin.fast_multiply(bitcoin.G, decoded_private_key)
    num_btc_wallets_searched += 1
    r = requests.get("https://blockchain.info/q/getsentbyaddress/" +
                     bitcoin.pubkey_to_address(public_key))
    sys.stdout.flush()
    print("Number of BTC wallets searched:         " +
          str(num_btc_wallets_searched),
          end='\r')
    print_pub_key = str(bitcoin.pubkey_to_address(public_key))
    print_priv_key = str(wif_encoded_private_key)
    print_bal = str(r.text)
    if int(r.text) > 0:
        sys.stdout.flush()
        print()
        print("Bitcoin Address is:", bitcoin.pubkey_to_address(public_key))
        print("Private Key is: ", wif_encoded_private_key)
        print("Balance is: ", r.text)
        send_email(print_pub_key, print_priv_key, print_bal)
        exit(0)
Пример #3
0
def main():

    # Generate a new private key: secret = random_secret()

    # Testing purposes, same private key as the one used in "Mastering Bitcoin"
    secret = hex(
        26563230048437957592232553826663696440606756685920117476832299673293013768870
    )
    print("Secret: ", secret)

    # Get the public key point.
    secretBase16 = int(secret, 16)
    point = secretBase16 * generator
    print("Elliptic Curve point:", point)

    publicKeyUncompressed = get_point_pubkey_uncompressed(point)
    publicKeyCompressed = get_point_pubkey_compressed(point)

    print("BTC public key uncompressed (HEX):", publicKeyUncompressed)
    print("BTC public key compressed (HEX):", publicKeyCompressed)

    btc_address_uncompressed = bitcoin.pubkey_to_address(publicKeyUncompressed)
    btc_address_compressed = bitcoin.pubkey_to_address(publicKeyCompressed)

    print("BTC public address uncompressed: ", btc_address_uncompressed)
    print("BTC public address compressed: ", btc_address_compressed)
Пример #4
0
    def printValues(self):
        # Generate a private key
        # print("Bitcoin Private Key hex is:\t", self.private_key)
        # print("Bitcoin Private Key decimal is:\t", self.decoded_private_key)

        # Generated public key from private key
        print("Bitcoin Public Key (hex) is:\t\t\t\t",
              self.hex_encoded_public_key)

        # Generated compressed public key from private key
        print("Bitcoin Compressed Public Key (hex) is:\t\t\t",
              self.hex_compressed_public_key)

        # TestNet generated address from uncompressed public key
        print("Bitcoin Address (b58check) is:\t\t\t\t",
              bitcoin.pubkey_to_address(self.public_key))

        # TestNet generated address from compressed public key
        print("Bitcoin Compressed Bitcoin Address (b58check) is:\t",
              bitcoin.pubkey_to_address(self.hex_compressed_public_key))

        ### Ethereum
        # Generated keccak256 hash using the Bitcoin public key without prefix
        print("keccak256 Public Key Hash:\t\t\t\t", self.kcck256())

        # Generated checksum address using keccak256 hash
        print("Ethereum Public Address: \t\t\t\t",
              hex(int(self.ethAddress(), 16)))
        checksum_addr = self.ethAddressChecksum(self.ethAddress())
        print("Ethereum Public Address Checksum: \t\t\t 0x" + checksum_addr)
Пример #5
0
    def test_stealth_tx_outputs(self):

        nonce = int('deadbeef', 16)
        value = 10**8
        outputs = bc.mk_stealth_tx_outputs(self.addr, value, self.ephem_priv,
                                           nonce)

        self.assertEqual(outputs[0]['value'], 0)
        self.assertEqual(outputs[0]['script'],
                         '6a2606deadbeef' + self.ephem_pub)
        self.assertEqual(outputs[1]['address'],
                         bc.pubkey_to_address(self.pay_pub))
        self.assertEqual(outputs[1]['value'], value)

        outputs = bc.mk_stealth_tx_outputs(self.testnet_addr, value,
                                           self.ephem_priv, nonce, 'testnet')

        self.assertEqual(outputs[0]['value'], 0)
        self.assertEqual(outputs[0]['script'],
                         '6a2606deadbeef' + self.ephem_pub)
        self.assertEqual(outputs[1]['address'],
                         bc.pubkey_to_address(self.pay_pub, 111))
        self.assertEqual(outputs[1]['value'], value)

        self.assertRaises(Exception, bc.mk_stealth_tx_outputs,
                          self.testnet_addr, value, self.ephem_priv, nonce,
                          'btc')

        self.assertRaises(Exception, bc.mk_stealth_tx_outputs, self.addr,
                          value, self.ephem_priv, nonce, 'testnet')
Пример #6
0
def generate_address(secret_bytes):
    int_privkey = int.from_bytes(secret_bytes, 'big')
    print('privkey (int): {privkey}'.format(privkey=int_privkey))
    wif_not_compressing_privkey = bitcoin.encode_privkey(secret_bytes, 'wif')
    print('privkey (wif, not compressing): {privkey}'.format(
        privkey=wif_not_compressing_privkey))
    wif_compressing_privkey = bitcoin.encode_privkey(secret_bytes,
                                                     'wif_compressed')
    print('privkey (wif, compressing): {privkey}'.format(
        privkey=wif_compressing_privkey))
    print()

    public_key = bitcoin.fast_multiply(bitcoin.G, int_privkey)
    print('pubkey pair (int): {pubkey}'.format(pubkey=public_key))
    pubkey_not_compressed = bitcoin.encode_pubkey(public_key, 'hex')
    print('pubkey (not compressed, hex): {pubkey}'.format(
        pubkey=pubkey_not_compressed))
    pubkey_compressed = bitcoin.encode_pubkey(public_key, 'hex_compressed')
    print(
        'pubkey (compressed, hex): {pubkey}'.format(pubkey=pubkey_compressed))
    address_not_compressed = bitcoin.pubkey_to_address(public_key)
    print('address (not compressed, b58check): {address}'.format(
        address=address_not_compressed))
    address_compressed = bitcoin.pubkey_to_address(pubkey_compressed)
    print('address (compressed, b58check): {address}'.format(
        address=address_compressed))
    return address_compressed
Пример #7
0
def test_addr():
    key = random_privkey()
    pub = gen_pub_key(key)
    addr = gen_address_from_priv(key)
    assert addr == pubkey_to_address(pub)

    key = random_privkey()
    pub = gen_pub_key(key)
    addr = gen_address_from_priv(key)
    assert addr == pubkey_to_address(pub)
Пример #8
0
def get_wallet_balance_from_seed(bip39_mnemonic, bip39_password, derivation_path, last_child_index_to_search,
                                 network=Network.MAINNET):
    bip39_mnemonic = bip39_mnemonic.strip()
    mnemonic_words = bip39_mnemonic.split()
    with open('words.txt') as file:
        lines = file.read().splitlines()
    validate_mnemonic(mnemonic_words, lines)
    entropy_and_checksum = mnemonic_to_entropy_and_checksum(bip39_mnemonic, lines)
    verify_checksum(entropy_and_checksum, int(len(mnemonic_words) / 3))
    salt = "mnemonic" + bip39_password
    seed = hashlib.pbkdf2_hmac('sha512', bytearray(bip39_mnemonic, 'utf-8'), bytearray(salt, 'utf-8'), 2048)
    debug_print("seed: " + print_hex(seed))
    (master_private_key, master_chain_code) = hmac_digest_and_split(bytearray("Bitcoin seed", 'utf-8'), seed, 'sha512')
    debug_print("Master Private Key: " + print_hex(master_private_key))
    debug_print("Master Chain Code: " + print_hex(master_chain_code))
    master_public_key = bitcoin.privkey_to_pubkey(master_private_key)
    compressed_master_public_key = bitcoin.compress(master_public_key)
    debug_print("Master Public Key: " + print_hex(master_public_key))
    debug_print("Master Public Key (Compressed) : " + print_hex(compressed_master_public_key))
    print_extended_keys(master_chain_code, master_private_key, compressed_master_public_key, 0, 0, True, None)
    total_balance = 0

    magic_byte = public_magic_byte if network == Network.MAINNET else testnet_magic_byte
    for i in range(0, last_child_index_to_search):
        child_key, child_chain_code, child_pub_key = derive_child_from_path(
            derivation_path=derivation_path + str(i),
            parent_key=master_private_key,
            key_type=KeyType.PRIVATE,
            parent_chain_code=master_chain_code,
            network=network)
        address = bitcoin.pubkey_to_address(bitcoin.compress(child_pub_key), magic_byte)
        print("\nAddress: " + address + "\n")
        total_balance += query_address_info(address, network)
    print("Total Balance for this Wallet: " + pretty_format_account_balance(total_balance))
Пример #9
0
def create_invoice_user (email):
	cur = BMMySQL().conn().cursor(MySQLdb.cursors.DictCursor)
	cur.execute ("SELECT bm, masterpubkey_btc, offset_btc, feeamount, feecurrency FROM user WHERE email = %s AND active = 1", (email))
	result = False
	for row in cur.fetchall():
		result = row
	if result:
		if result['masterpubkey_btc'][0:4] == "xpub":
			# BIP44
			dpk1 = bitcoin.bip32_ckd(result['masterpubkey_btc'], 0)
			dpk2 = bitcoin.bip32_ckd(dpk1, result['offset_btc'])
			pubkey = bitcoin.bip32_extract_key(dpk2)
		else:
			# Electrum 1.x
			pubkey = bitcoin.electrum_pubkey(result['masterpubkey_btc'], result['offset_btc'])
		address = bitcoin.pubkey_to_address(pubkey)
		bitcoind_importaddress(address)
		cur.execute ("UPDATE user SET offset_btc = offset_btc + 1 WHERE email = %s AND active = 1 AND masterpubkey_btc = %s", (email, result['masterpubkey_btc']))
		if result['feecurrency'] in ("USD", "GBP", "EUR"):
			result['feeamount'] /= decimal.Decimal(get_bitcoin_price(result['feecurrency']))
		cur.execute ("INSERT INTO invoice (issuer, address, coin, amount, type, paid) VALUES (%s, %s, 'BTC', %s, 1, 0)", (result['bm'], address, result['feeamount']))
		cur.close()
		return address, result['feeamount'];
	cur.close()
	return False
Пример #10
0
def create_invoice_domain (domain, payer):
	cur = BMMySQL().conn().cursor(MySQLdb.cursors.DictCursor)
	filterwarnings('ignore', category = MySQLdb.Warning)
	cur.execute ("SELECT bm, masterpubkey_btc, offset_btc, feeamount, feecurrency FROM domain WHERE name = %s AND active = 1", (domain))
	result = False
	for row in cur.fetchall():
		result = row
	while result:
		if result['masterpubkey_btc'][0:4] == "xpub":
			# BIP44
			dpk1 = bitcoin.bip32_ckd(result['masterpubkey_btc'], 0)
			dpk2 = bitcoin.bip32_ckd(dpk1, result['offset_btc'])
			pubkey = bitcoin.bip32_extract_key(dpk2)
		else:
			# Electrum 1.x
			pubkey = bitcoin.electrum_pubkey(result['masterpubkey_btc'], result['offset_btc'])
		address = bitcoin.pubkey_to_address(pubkey)
		bitcoind_importaddress(address)
		cur.execute ("UPDATE domain SET offset_btc = offset_btc + 1 WHERE name = %s AND active = 1 AND masterpubkey_btc = %s", (domain, result['masterpubkey_btc']))
		if result['feecurrency'] in ("USD", "GBP", "EUR"):
			result['feeamount'] /= decimal.Decimal(get_bitcoin_price(result['feecurrency']))
		cur.execute ("INSERT IGNORE INTO invoice (issuer, payer, address, coin, amount, type, paid) VALUES (%s, %s, %s, 'BTC', %s, 0, 0)", (result['bm'], payer, address, result['feeamount']))

		# invoice already exists for that address, increment
		if cur.rowcount == 0:
			cur.execute ("SELECT bm, masterpubkey_btc, offset_btc, feeamount, feecurrency FROM domain WHERE name = %s AND active = 1", (domain))
			result = False
			for row in cur.fetchall():
				result = row
			continue
		
		cur.close()
		return address, result['feeamount'];
	cur.close()
	return False
Пример #11
0
def sign(tx, i, priv, t="default", script="", hashcode=SIGHASH_ALL):
    i = int(i)
    #if (not is_python2 and isinstance(re, bytes)) or not re.match('^[0-9a-fA-F]*$', tx):
    if not re.match('^[0-9a-fA-F]*$', tx):
        return binascii.unhexlify(
            custom_sign(safe_hexlify(tx), i, priv, hashcode))
    if len(priv) <= 33:
        priv = b.safe_hexlify(priv)
    pub = b.privkey_to_pubkey(priv)
    address = b.pubkey_to_address(pub)
    if t not in ["atomic_1", "atomic_2"]:
        script = b.mk_pubkey_script(address)
    if script == "": error()
    signing_tx = b.signature_form(
        tx, i, script,
        hashcode)  #mk_pubkey_scrip needs to be our custom scriptn
    sig = b.ecdsa_tx_sign(signing_tx, priv, hashcode)
    txobj = b.deserialize(tx)
    if t == "atomic_1":
        txobj["ins"][i]["script"] = b.serialize_script([sig])
    if t == "atomic_2":
        old_sig = txobj["ins"][i]["script"]
        txobj["ins"][i]["script"] = b.serialize_script([old_sig, sig, 1])
    else:
        txobj["ins"][i]["script"] = b.serialize_script([sig, pub])
    return b.serialize(txobj)
def main():
    from argparse import ArgumentParser

    parser = ArgumentParser()

    parser.add_argument(
        '-k',
        '--key',
        default=
        '48f0ba87db8c803933caad92756647f753f07f5a1cd5735a62349b640e81bf94',
        type=str,
        help='BTC Private Key')
    args = parser.parse_args()

    inputprivatekey = args.key
    print("inputprivatekey=", inputprivatekey)

    public_key = private_key_to_public_key(inputprivatekey)
    #print("Public key (x,y) coordinates:", public_key)

    compressed_public_key = bitcoin.compress(public_key)
    #print("Public key (hex compressed):", compressed_public_key)

    address = pubkey_to_address(compressed_public_key)
    #print("Compressed Bitcoin address (base58check):", address)

    print("address=", bitcoin.pubkey_to_address(public_key))
Пример #13
0
def segwit_sign(tx,
                i,
                priv,
                amount,
                hashcode=SIGHASH_ALL,
                script=None,
                separator_index=None):
    i = int(i)
    txobj = tx if isinstance(tx, dict) else deserialize(tx)
    if not isinstance(tx, dict) and ((not is_python2 and isinstance(re, bytes))
                                     or not re.match('^[0-9a-fA-F]*$', tx)):
        return binascii.unhexlify(sign(binascii.hexlify(tx), i, priv))
    if len(priv) <= 33:
        priv = binascii.hexlify(priv)
    pub = privkey_to_pubkey(priv)
    address = pubkey_to_address(pub)
    wscript = mk_pubkey_script(address) if not script else script
    stripped_script = segwit_strip_script_separator(wscript, separator_index)
    signing_tx = segwit_signature_form(tx,
                                       i,
                                       stripped_script,
                                       amount,
                                       hashcode=hashcode)
    rawsig = ecdsa_raw_sign(
        hashlib.sha256(
            hashlib.sha256(
                binascii.unhexlify(signing_tx)).digest()).hexdigest(), priv)
    sig = der_encode_sig(*rawsig) + encode(hashcode, 16, 2)
    txobj['ins'][i]['txinwitness'] = [sig, pub if not script else script]
    return serialize(txobj)
Пример #14
0
def sign_donation_tx(tx, i, priv):
    from bitcoin.main import fast_multiply, decode_privkey, G, inv, N
    from bitcoin.transaction import der_encode_sig
    k = sign_k
    hashcode = btc.SIGHASH_ALL
    i = int(i)
    if len(priv) <= 33:
        priv = btc.safe_hexlify(priv)
    pub = btc.privkey_to_pubkey(priv)
    address = btc.pubkey_to_address(pub)
    signing_tx = btc.signature_form(
            tx, i, btc.mk_pubkey_script(address), hashcode)

    msghash = btc.bin_txhash(signing_tx, hashcode)
    z = btc.hash_to_int(msghash)
    # k = deterministic_generate_k(msghash, priv)
    r, y = fast_multiply(G, k)
    s = inv(k, N) * (z + r * decode_privkey(priv)) % N
    rawsig = 27 + (y % 2), r, s

    sig = der_encode_sig(*rawsig) + btc.encode(hashcode, 16, 2)
    # sig = ecdsa_tx_sign(signing_tx, priv, hashcode)
    txobj = btc.deserialize(tx)
    txobj["ins"][i]["script"] = btc.serialize_script([sig, pub])
    return btc.serialize(txobj)
Пример #15
0
def generatekey():
    keyword = request.args.get('keyword')
    mypriv = bitcoin.sha256(keyword)
    mypubl = bitcoin.privkey_to_pubkey(mypriv)
    myaddress = bitcoin.pubkey_to_address(mypubl)
    myInfo = {'mypriv': mypriv, 'mypubl': mypubl, 'myaddress': myaddress}
    return json.dumps(myInfo)
def carlisle_method(data, compress=False):
    """
    Use the Carlisle method to generate a bitcoin address the hash of data.

    Args:
        data: bytes, data to hash
        compress: bool, whether to compress the public key

    Returns:
        dictionary with address generation information
    """
    # Compute the sha256 hash of the data
    sha256_hash = hashlib.sha256(data)
    private_key = sha256_hash.hexdigest()

    # Generate public key
    public_key = bitcoin.privkey_to_pubkey(private_key)
    if compress:
        public_key = bitcoin.compress(public_key)

    # Generate bitcoin address
    address = bitcoin.pubkey_to_address(public_key)

    return {
        'private_key': private_key,
        'public_key': public_key,
        'compressed': compress,
        'address': address,
        'url ': 'https://blockchain.info/address/{}'.format(address),
    }
Пример #17
0
def sign_donation_tx(tx, i, priv):
    from bitcoin.main import fast_multiply, decode_privkey, G, inv, N
    from bitcoin.transaction import der_encode_sig
    k = sign_k
    hashcode = btc.SIGHASH_ALL
    i = int(i)
    if len(priv) <= 33:
        priv = btc.safe_hexlify(priv)
    pub = btc.privkey_to_pubkey(priv)
    address = btc.pubkey_to_address(pub)
    signing_tx = btc.signature_form(tx, i, btc.mk_pubkey_script(address),
                                    hashcode)

    msghash = btc.bin_txhash(signing_tx, hashcode)
    z = btc.hash_to_int(msghash)
    # k = deterministic_generate_k(msghash, priv)
    r, y = fast_multiply(G, k)
    s = inv(k, N) * (z + r * decode_privkey(priv)) % N
    rawsig = 27 + (y % 2), r, s

    sig = der_encode_sig(*rawsig) + btc.encode(hashcode, 16, 2)
    # sig = ecdsa_tx_sign(signing_tx, priv, hashcode)
    txobj = btc.deserialize(tx)
    txobj["ins"][i]["script"] = btc.serialize_script([sig, pub])
    return btc.serialize(txobj)
Пример #18
0
def sarah(hexli):
    private_key = hexli
    decoded_private_key = bitcoin.decode_privkey(private_key, 'hex')
    wif_encoded_private_key = bitcoin.encode_privkey(decoded_private_key, 'wif')
    compressed_private_key = private_key + '01'
    wif_compressed_private_key = bitcoin.encode_privkey(bitcoin.decode_privkey(private_key, 'hex'), 'wif_compressed')
    public_key = bitcoin.fast_multiply(bitcoin.G, decoded_private_key)
    hex_encoded_public_key = bitcoin.encode_pubkey(public_key, 'hex')
    (public_key_x, public_key_y) = public_key
    if public_key_y % 2 == 0:
      compressed_prefix = '02'
    else:
      compressed_prefix = '03'
    hex_compressed_public_key = compressed_prefix + bitcoin.encode(public_key_x, 16)
    non_compressed_adress = bitcoin.pubkey_to_address(public_key)
    compressed_address = bitcoin.pubkey_to_address(hex_compressed_public_key.encode("utf8"))
    return non_compressed_adress, compressed_address, wif_encoded_private_key, wif_compressed_private_key, private_key
def run():
    while True:
        valid_private_key = False
        while not valid_private_key:
            private_key = bitcoin.random_key()
            decoded_private_key = bitcoin.decode_privkey(private_key, 'hex')
            valid_private_key = 0 < decoded_private_key < bitcoin.N

        wif_encoded_private_key = bitcoin.encode_privkey(
            decoded_private_key, 'wif')
        public_key = bitcoin.fast_multiply(bitcoin.G, decoded_private_key)
        r = requests.get("https://blockchain.info/q/getsentbyaddress/" +
                         bitcoin.pubkey_to_address(public_key))
        if int(r.text) > 0:
            print("Bitcoin Address is:", bitcoin.pubkey_to_address(public_key))
            print("Private Key is: ", wif_encoded_private_key)
            print("Balance is: ", r.text)
Пример #20
0
def generate_key():
    #generate a random private key
    valid_private_key = False
    while not valid_private_key:
        private_key = bitcoin.random_key()
        decoded_private_key = bitcoin.decode_privkey(private_key, 'hex')
        valid_private_key = 0 < decoded_private_key < bitcoin.N
    #print ('Private Key (hex) is: ' + private_key)
    #print ('private Key (decimal) is: ' + str(decoded_private_key))

    #convert private key to WIF format
    wif_encoded_private_key = bitcoin.encode_privkey(decoded_private_key,
                                                     'wif')
    #print('Private Key (WIF) is: ' + wif_encoded_private_key)

    # Add sufix '01' to indicate a compressed private Key
    compressed_private_key = private_key + '01'
    #print ('Private Key Compressed (hex) is: ' + compressed_private_key)

    # generate a WIF format from the compressed private key (WIF-compressed)
    wif_compressed_private_key = bitcoin.encode_privkey(
        bitcoin.decode_privkey(compressed_private_key, 'hex'), 'wif')
    #print ('Private Key (WIF-compressed) is: ' + wif_compressed_private_key)

    # Multiply de EC generator G with the priveate key to get a public key point
    public_key = bitcoin.fast_multiply(bitcoin.G, decoded_private_key)
    #print ('Public Key (x,y) coordinates are: ' + str(public_key))

    # Encode as hex, prefix 04
    hex_encoded_public_key = bitcoin.encode_pubkey(public_key, 'hex')
    #print ('Public Key (hex) is: ' + hex_encoded_public_key)

    # Compress public key, adjust prefix depending on whether y is even or odd
    (public_key_x, public_key_y) = public_key
    if public_key_y % 2 == 0:
        compressed_prefix = '02'
    else:
        compressed_prefix = '03'
    hex_compressed_public_key = compressed_prefix + bitcoin.encode(
        public_key_x, 16)
    #print ('Compressed Public Key is: ' + hex_compressed_public_key)

    # Generate bitcoin address from public Key
    #print ('Bitcoin Address (b58check) is: ' + bitcoin.pubkey_to_address(public_key))

    # Generate compressedd bitcoin address from compressed public key
    #print ('Compressed Bitcoin Address (b58check) is: ' + bitcoin.pubkey_to_address(hex_compressed_public_key))

    compressed_address_base58check = bitcoin.pubkey_to_address(
        hex_compressed_public_key)

    kson = {
        "wif1": wif_encoded_private_key,
        "wif": wif_compressed_private_key,
        "key": compressed_address_base58check
    }

    return kson
Пример #21
0
 def generate_new_address(self, index):
     """
     Generate new bitcoin address from a hd public master key based on a particlar index
     Address can be generated sequentially like in the case of electrum
     :param index: Index to use to generate address
     :return: Generated address
     """
     address = btc.pubkey_to_address(
         btc.bip32_descend(self.public_key, [0, index]))
     return address
Пример #22
0
def function_keys():

    valid_private_key = False  #randomize private key

    while not valid_private_key:
        private_key = bitcoin.random_key()
        decode_private_key = bitcoin.decode_privkey(private_key, 'hex')
        valid_private_key = 0 < decode_private_key < bitcoin.N

    print "Private Key (hex) is:", private_key
    print "Private Key (decimal) is:", decode_private_key
    wif_encode_private_key = bitcoin.encode_privkey(decode_private_key, 'wif')
    print "Private key (WIF) is:", wif_encode_private_key  # convert private key to wif format

    compressed_private_key = private_key + '01'
    print "Private key Compressed (hex) is:", compressed_private_key  # add '01' to indicate compressed private key

    wif_compressed_private_key = bitcoin.encode_privkey(
        bitcoin.decode_privkey(compressed_private_key, 'hex'), 'wif')
    print "Private Key (Wif-compressed) is:", wif_compressed_private_key

    public_key = bitcoin.fast_multiply(
        bitcoin.G, decode_private_key
    )  # multiply EC generator with the private key to have public key point
    print "Public Key (x, y) coordinates is:", public_key

    hex_encoded_public_key = bitcoin.encode_pubkey(
        public_key, 'hex')  # encoded public key with '04'
    print "Public Key (hex) is:", hex_encoded_public_key

    (public_key_x, public_key_y) = public_key  # compressed public key
    if (public_key_y % 2) == 0:
        compressed_prefix = '02'
    else:
        compressed_prefix = '03'
        hex_compressed_public_key = compressed_prefix + bitcoin.encode(
            public_key_x, 16)
    print "Compressed Public Key (hex) is:", hex_compressed_public_key
    print "Bitcoin Address (b58check) is:", bitcoin.pubkey_to_address(
        public_key)

    print "Compressed Bitcoin Address (b58check) is:", bitcoin.pubkey_to_address(
        hex_compressed_public_key)
Пример #23
0
def get_key_pair():
    v = False
    while not v:
        private_key = bitcoin.random_key()
        private_key = bitcoin.decode_privkey(private_key)
        v = 0 < private_key < bitcoin.N
    wif_private_key = bitcoin.encode_privkey(private_key, 'wif')
    public_key = bitcoin.privkey_to_pubkey(wif_private_key)
    address = bitcoin.pubkey_to_address(public_key)
    return address, wif_private_key
Пример #24
0
    def auth_counterparty(self, nick, cr):
        #deserialize the commitment revelation
        cr_dict = btc.PoDLE.deserialize_revelation(cr)
        #check the validity of the proof of discrete log equivalence
        tries = jm_single().config.getint("POLICY", "taker_utxo_retries")
        def reject(msg):
            log.info("Counterparty commitment not accepted, reason: " + msg)
            return False
        if not btc.verify_podle(cr_dict['P'], cr_dict['P2'], cr_dict['sig'],
                                cr_dict['e'], self.maker.commit,
                                index_range=range(tries)):
            reason = "verify_podle failed"
            return reject(reason)
        #finally, check that the proffered utxo is real, old enough, large enough,
        #and corresponds to the pubkey
        res = jm_single().bc_interface.query_utxo_set([cr_dict['utxo']],
                                                      includeconf=True)
        if len(res) != 1 or not res[0]:
            reason = "authorizing utxo is not valid"
            return reject(reason)
        age = jm_single().config.getint("POLICY", "taker_utxo_age")
        if res[0]['confirms'] < age:
            reason = "commitment utxo not old enough: " + str(res[0]['confirms'])
            return reject(reason)
        reqd_amt = int(self.cj_amount * jm_single().config.getint(
            "POLICY", "taker_utxo_amtpercent") / 100.0)
        if res[0]['value'] < reqd_amt:
            reason = "commitment utxo too small: " + str(res[0]['value'])
            return reject(reason)
        if res[0]['address'] != btc.pubkey_to_address(cr_dict['P'],
                                                         get_p2pk_vbyte()):
            reason = "Invalid podle pubkey: " + str(cr_dict['P'])
            return reject(reason)

        # authorisation of taker passed

        # Send auth request to taker
        # Need to choose an input utxo pubkey to sign with
        # (no longer using the coinjoin pubkey from 0.2.0)
        # Just choose the first utxo in self.utxos and retrieve key from wallet.
        auth_address = self.utxos[self.utxos.keys()[0]]['address']
        auth_key = self.maker.wallet.get_key_from_addr(auth_address)
        auth_pub = btc.privtopub(auth_key)
        btc_sig = btc.ecdsa_sign(self.kp.hex_pk(), auth_key)
        self.maker.msgchan.send_ioauth(nick, self.utxos.keys(), auth_pub,
                                       self.cj_addr, self.change_addr, btc_sig)
        #In case of *blacklisted (ie already used) commitments, we already
        #broadcasted them on receipt; in case of valid, and now used commitments,
        #we broadcast them here, and not early - to avoid accidentally
        #blacklisting commitments that are broadcast between makers in real time
        #for the same transaction.
        self.maker.transfer_commitment(self.maker.commit)
        #now persist the fact that the commitment is actually used.
        check_utxo_blacklist(self.maker.commit, persist=True)
        return True
Пример #25
0
def key_address(masterkey, path):
    """Compute address and private key (hex) for path"""

    derived_key = descend(masterkey, path)
    priv_key = btc.bip32_deserialize(derived_key)[-1]
    pub_key = btc.bip32_extract_key(btc.bip32_privtopub(derived_key))
    priv_key_hex = btc.encode_privkey(
        btc.decode_privkey(priv_key, 'bin_compressed'), 'hex')
    address = btc.pubkey_to_address(pub_key)

    return priv_key_hex, address
Пример #26
0
    def test_stealth_tx_outputs(self):

        nonce = int('deadbeef', 16)
        value = 10**8
        outputs = bc.mk_stealth_tx_outputs(self.addr, value, self.ephem_priv, nonce)

        self.assertEqual(outputs[0]['value'], 0)
        self.assertEqual(outputs[0]['script'], '6a2606deadbeef' + self.ephem_pub)
        self.assertEqual(outputs[1]['address'], bc.pubkey_to_address(self.pay_pub))
        self.assertEqual(outputs[1]['value'], value)
        
        outputs = bc.mk_stealth_tx_outputs(self.testnet_addr, value, self.ephem_priv, nonce, 'testnet')
        
        self.assertEqual(outputs[0]['value'], 0)
        self.assertEqual(outputs[0]['script'], '6a2606deadbeef' + self.ephem_pub)
        self.assertEqual(outputs[1]['address'], bc.pubkey_to_address(self.pay_pub, 111))
        self.assertEqual(outputs[1]['value'], value)

        self.assertRaises(Exception, bc.mk_stealth_tx_outputs, self.testnet_addr, value, self.ephem_priv, nonce, 'btc')
        
        self.assertRaises(Exception, bc.mk_stealth_tx_outputs, self.addr, value, self.ephem_priv, nonce, 'testnet')
Пример #27
0
def save_memo(request):
    encrypted_text = request.POST['encrypted_text']
    pubkey = request.POST['pubkey']
    sig = request.POST['signature']
    txid = request.POST['txid'].lower()
    crypto = request.POST.get('currency', 'btc').lower()

    if len(encrypted_text) > settings.MAX_MEMO_SIZE_BYTES:
        return http.JsonResponse(
            {
                'error':
                "Memo exceeds maximum size of: %s bytes" %
                settings.MAX_MEMO_SIZE_BYTES
            },
            status=400)

    data = dict(pubkey=pubkey,
                crypto=crypto,
                txid=txid,
                encrypted_text=encrypted_text)
    if Memo.objects.filter(**data).exists():
        return http.HttpResponse("OK")
    data['signature'] = sig

    try:
        version_byte = crypto_data[crypto]['address_version_byte']
    except IndexError:
        return http.HttpResponse("Currency not supported", status=400)

    address = pubkey_to_address(pubkey, version_byte)
    tx = CachedTransaction.fetch_full_tx(crypto, txid=txid)

    for item in tx['inputs'] + tx['outputs']:
        if item['address'] == address:
            break
    else:
        return http.HttpResponse("Pubkey not in TXID", status=400)

    if ecdsa_verify(encrypted_text, sig, pubkey):
        memo, c = Memo.objects.get_or_create(crypto=crypto,
                                             txid=txid,
                                             pubkey=pubkey)
        memo.encrypted_text = encrypted_text
        memo.signature = sig
        memo.save()
    else:
        return http.HttpResponse("Invalid signature", status=400)

    return http.HttpResponse("OK")
Пример #28
0
def segwit_sign(tx, i, priv, amount, hashcode=SIGHASH_ALL, script=None, separator_index=None):
    i = int(i)
    txobj = tx if isinstance(tx, dict) else deserialize(tx)
    if not isinstance(tx, dict) and ((not is_python2 and isinstance(re, bytes)) or not re.match('^[0-9a-fA-F]*$', tx)):
        return binascii.unhexlify(sign(binascii.hexlify(tx), i, priv))
    if len(priv) <= 33:
        priv = binascii.hexlify(priv)
    pub = privkey_to_pubkey(priv)
    address = pubkey_to_address(pub)
    wscript = mk_pubkey_script(address) if not script else script
    stripped_script = segwit_strip_script_separator(wscript, separator_index)
    signing_tx = segwit_signature_form(tx, i, stripped_script, amount, hashcode=hashcode)
    rawsig = ecdsa_raw_sign(hashlib.sha256(hashlib.sha256(binascii.unhexlify(signing_tx)).digest()).hexdigest(), priv)
    sig = der_encode_sig(*rawsig)+encode(hashcode, 16, 2)
    txobj['ins'][i]['txinwitness'] = [sig, pub if not script else script]
    return serialize(txobj)
Пример #29
0
def save_memo(request):
    encrypted_text = request.POST['encrypted_text']
    pubkey = request.POST['pubkey']
    sig = request.POST['signature']
    txid = request.POST['txid'].lower()
    crypto = request.POST.get('currency', 'btc').lower()

    if len(encrypted_text) > settings.MAX_MEMO_SIZE_BYTES:
        return http.JsonResponse(
            {'error': "Memo exceeds maximum size of: %s bytes" % settings.MAX_MEMO_SIZE_BYTES},
            status=400
        )

    data = dict(pubkey=pubkey, crypto=crypto, txid=txid, encrypted_text=encrypted_text)
    if Memo.objects.filter(**data).exists():
        return http.HttpResponse("OK")
    data['signature'] = sig

    try:
        version_byte = crypto_data[crypto]['address_version_byte']
    except IndexError:
        return http.HttpResponse("Currency not supported", status=400)

    address = pubkey_to_address(pubkey, version_byte)
    tx = CachedTransaction.fetch_full_tx(crypto, txid=txid)

    for item in tx['inputs'] + tx['outputs']:
        if item['address'] == address:
            break
    else:
        return http.HttpResponse("Pubkey not in TXID", status=400)

    if ecdsa_verify(encrypted_text, sig, pubkey):
        memo, c = Memo.objects.get_or_create(
            crypto=crypto,
            txid=txid,
            pubkey=pubkey
        )
        memo.encrypted_text = encrypted_text
        memo.signature = sig
        memo.save()
    else:
        return http.HttpResponse("Invalid signature", status=400)

    return http.HttpResponse("OK")
Пример #30
0
def address_search(search_for='1Love'):
    privkey = random.randrange(2**256)
    address = ''
    count = 0
    start = timeit.default_timer()

    print("Searching for %s (pid %s)" % (search_for, os.getpid()))
    while not search_for in address:
        privkey += 1
        pubkey_point = fast_multiply(G, privkey)
        address = pubkey_to_address(pubkey_point)
        count += 1
        if not count % 1000:
            print("Searched %d in %d seconds (pid %d)" %
                  (count, timeit.default_timer() - start, os.getpid()))

    private_key, public_key, pid, wif_key = key_data(privkey)
    key_data_output(private_key, public_key, pid, wif_key, search_for, address,
                    count, start)
def checkSigBitcoin(message, signature, authorname):
    try:
        # FIXME: is base64.b64decode(...) safe?
        pub = bitcoin.ecdsa_recover(message, signature)
    except:
        raise jvalidate.ValidationError(
            "Bitcoin signature or message invalid.")
    author = Member.by_name(authorname)

    if author is None:
        raise jvalidate.ValidationError(
            "Member '%s' not found for PGP signature check." % authorname)

    addr = author.address
    addr_from_pub = bitcoin.pubkey_to_address(pub)
    # is this enough? FIXME: review!
    # FIXME: check type(?) bug in bitcoin.ecsda_verify_addr

    if addr != addr_from_pub:
        raise jvalidate.ValidationError(
            "Bitcoin signature validation failed (%s, %s, %s)." %
            (repr(message), signature, addr))
Пример #32
0
def get_wallet_balance_from_extended_public_key(extended_public_key, derivation_path, last_child_index_to_search,
                                                network=Network.MAINNET):
    (versionBytes, depth, parentKeyFingerprint, index, chainCode, pubKey) = deserialize_extended_key(
        extended_public_key)
    index = int.from_bytes(index, 'big')
    hardened = index >= 2 ** 31
    if hardened:
        index -= 2 ** 31
    debug_print("XPUB Info:  Depth: " + str(ord(depth)) + " index: " + str(index) + " hardened: " + str(hardened))
    total_balance = 0

    magic_byte = public_magic_byte if network == Network.MAINNET else testnet_magic_byte
    for i in range(0, last_child_index_to_search):
        child_key, child_chain_code, child_pub_key = derive_child_from_path(
            derivation_path=derivation_path + str(i),
            parent_key=pubKey,
            key_type=KeyType.PUBLIC,
            parent_chain_code=chainCode,
            network=network)
        address = bitcoin.pubkey_to_address(bitcoin.compress(child_pub_key), magic_byte)
        total_balance += query_address_info(address)
    print("Total Balance for this Wallet: " + pretty_format_account_balance(total_balance))
Пример #33
0
def sign(tx, i, priv, t="default", script="", hashcode=SIGHASH_ALL):
    i = int(i)
    #if (not is_python2 and isinstance(re, bytes)) or not re.match('^[0-9a-fA-F]*$', tx):
    if not re.match('^[0-9a-fA-F]*$', tx):
        return binascii.unhexlify(custom_sign(safe_hexlify(tx), i, priv, hashcode))
    if len(priv) <= 33:
        priv = b.safe_hexlify(priv)
    pub = b.privkey_to_pubkey(priv)
    address = b.pubkey_to_address(pub)
    if t not in ["atomic_1", "atomic_2"]:
        script=b.mk_pubkey_script(address)
    if script=="": error()
    signing_tx = b.signature_form(tx, i, script, hashcode)#mk_pubkey_scrip needs to be our custom scriptn
    sig = b.ecdsa_tx_sign(signing_tx, priv, hashcode)
    txobj = b.deserialize(tx)
    if t=="atomic_1":
        txobj["ins"][i]["script"] = b.serialize_script([sig])
    if t=="atomic_2":
        old_sig = txobj["ins"][i]["script"]
        txobj["ins"][i]["script"] = b.serialize_script([old_sig, sig, 1])
    else:
        txobj["ins"][i]["script"] = b.serialize_script([sig, pub])
    return b.serialize(txobj)
Пример #34
0
def KeyToAddress(key):

    private_key = str(key)
    decoded_private_key = bitcoin.decode_privkey(private_key.encode("utf-8"),
                                                 'hex')
    valid_private_key = 0 < decoded_private_key < bitcoin.N

    wif_encoded_private_key = bitcoin.encode_privkey(decoded_private_key,
                                                     'wif')
    keys = wif_encoded_private_key

    public_key = bitcoin.fast_multiply(bitcoin.G, decoded_private_key)

    (public_key_x, public_key_y) = public_key
    if (public_key_y % 2) == 0:
        compressed_prefix = '02'
    else:
        compressed_prefix = '03'
    hex_compressed_public_key = compressed_prefix + bitcoin.encode(
        public_key_x, 16)

    address1 = bitcoin.pubkey_to_address(public_key)
    #address2 = bitcoin.pubkey_to_address(hex_compressed_public_key.encode("utf-8"))

    #balance1 = balanceApi(address1)
    #balance1 = btcApi(address1)
    #if balance1 ==None:
    #    balance1 = 0

    if Address.objects.filter(address=address1):
        balance = "可能有余额"

    else:
        balance = "没有"

    return keys, address1, balance
Пример #35
0
    pubKeyBytes = binascii.unhexlify(pubKey)
    sha256val = hashlib.sha256(pubKeyBytes).digest()
    ripemd160val = hashlib.new('ripemd160', sha256val).digest()
    return bitcoin.bin_to_b58check(ripemd160val, magic_byte)



priv_key = base58.b58decode('5HueCGU8rMjxEXxiPuD5BDku4MkFqeZyd4dZ1jvhTVqvbTLvyTJ')

private_key = binascii.hexlify(priv_key)
prKey = private_key[2:-8]
print("Private Key (hex): ", prKey)


public_key = private_key_to_public_key(prKey)
print("Public key (x,y) coordinates: ", public_key)

compressed_public_key = bitcoin.compress(public_key)
print("Public key (hex compressed): ", compressed_public_key)

print()

address = bitcoin.pubkey_to_address(public_key)
print("Address: ", address)

address1 = pubkey_to_address(compressed_public_key)
print("Compressed Bitcoin Address (bas58check): ", address1)

addressDEC = base58.b58decode(address1)
print(addressDEC)
Пример #36
0
# Add suffix "01" to indicate a compressed private key
compressed_private_key = private_key + '01'
print("Private Key Compressed (hex) is: ", compressed_private_key)

# Generate a WIF format from the compressed private key (WIF-compressed)
wif_compressed_private_key = bitcoin.encode_privkey(
    bitcoin.decode_privkey(compressed_private_key, 'hex'), 'wif')
print("Private Key (WIF-Compressed) is: ", wif_compressed_private_key)

# Multiply the EC generator point G with the private key to get a public key point
public_key = bitcoin.fast_multiply(bitcoin.G, decoded_private_key)
print("Public Key (x,y) coordinates is:", public_key)

# Encode as hex, prefix 04
hex_encoded_public_key = bitcoin.encode_pubkey(public_key, 'hex')
print("Public Key (hex) is:", hex_encoded_public_key)

# Compress public key, adjust prefix depending on whether y is even or odd
(public_key_x, public_key_y) = public_key
compressed_prefix = '02' if (public_key_y % 2) == 0 else '03'
hex_compressed_public_key = compressed_prefix + bitcoin.encode(
    public_key_x, 16)
print("Compressed Public Key (hex) is:", hex_compressed_public_key)

# Generate bitcoin address from public key
print("Bitcoin Address (b58check) is:", bitcoin.pubkey_to_address(public_key))

# Generate compressed bitcoin address from compressed public key
print("Compressed Bitcoin Address (b58check) is:",
      bitcoin.pubkey_to_address(hex_compressed_public_key))
Пример #37
0
    def recv_txio(self, nick, utxo_list, auth_pub, cj_addr, change_addr):
        if nick:
            if nick not in self.nonrespondants:
                log.debug(('recv_txio => nick={} not in '
                           'nonrespondants {}').format(nick, self.nonrespondants))
                return
            self.utxos[nick] = utxo_list
            utxo_data = jm_single().bc_interface.query_utxo_set(self.utxos[nick])
            if None in utxo_data:
                log.error(('ERROR outputs unconfirmed or already spent. '
                           'utxo_data={}').format(pprint.pformat(utxo_data)))
                # when internal reviewing of makers is created, add it here to
                # immediately quit; currently, the timeout thread suffices.
                return
            #Complete maker authorization:
            #Extract the address fields from the utxos
            #Construct the Bitcoin address for the auth_pub field
            #Ensure that at least one address from utxos corresponds.
            input_addresses = [d['address'] for d in utxo_data]
            auth_address = btc.pubkey_to_address(auth_pub, get_p2pk_vbyte())
            if not auth_address in input_addresses:
                log.error("ERROR maker's authorising pubkey is not included "
                          "in the transaction: " + str(auth_address))
                return

            total_input = sum([d['value'] for d in utxo_data])
            real_cjfee = calc_cj_fee(self.active_orders[nick]['ordertype'],
                           self.active_orders[nick]['cjfee'], self.cj_amount)
            change_amount = (total_input - self.cj_amount -
                self.active_orders[nick]['txfee'] + real_cjfee)

            # certain malicious and/or incompetent liquidity providers send
            # inputs totalling less than the coinjoin amount! this leads to
            # a change output of zero satoshis, so the invalid transaction
            # fails harmlessly; let's fail earlier, with a clear message.
            if change_amount < jm_single().BITCOIN_DUST_THRESHOLD:
                fmt = ('ERROR counterparty requires sub-dust change. No '
                       'action required. nick={}'
                       'totalin={:d} cjamount={:d} change={:d}').format
                log.warn(fmt(nick, total_input, self.cj_amount, change_amount))
                return              # timeout marks this maker as nonresponsive

            self.outputs.append({'address': change_addr, 'value': change_amount})
            fmt = ('fee breakdown for {} totalin={:d} '
                   'cjamount={:d} txfee={:d} realcjfee={:d}').format
            log.debug(fmt(nick, total_input, self.cj_amount,
                self.active_orders[nick]['txfee'], real_cjfee))
            self.outputs.append({'address': cj_addr, 'value': self.cj_amount})
            self.cjfee_total += real_cjfee
            self.maker_txfee_contributions += self.active_orders[nick]['txfee']
            self.nonrespondants.remove(nick)
            if len(self.nonrespondants) > 0:
                log.debug('nonrespondants = ' + str(self.nonrespondants))
                return
        #Note we fall through here immediately if nick is None;
        #this is the case for recovery where we are going to do a join with
        #less participants than originally intended. If minmakers is set to 0,
        #disallowing completion with subset, assert is still true.
        assert len(self.active_orders.keys()) >= jm_single().config.getint(
                                                 "POLICY", "minimum_makers")
        log.info('got all parts, enough to build a tx')
        self.nonrespondants = list(self.active_orders.keys())

        my_total_in = sum([va['value'] for u, va in
                           self.input_utxos.iteritems()])
        if self.my_change_addr:
            #Estimate fee per choice of next/3/6 blocks targetting.
            estimated_fee = estimate_tx_fee(len(sum(
                self.utxos.values(),[])), len(self.outputs)+2)
            log.info("Based on initial guess: "+str(
                self.total_txfee)+", we estimated a miner fee of: "+str(estimated_fee))
            #reset total
            self.total_txfee = estimated_fee
        my_txfee = max(self.total_txfee - self.maker_txfee_contributions, 0)
        my_change_value = (
            my_total_in - self.cj_amount - self.cjfee_total - my_txfee)
        #Since we could not predict the maker's inputs, we may end up needing
        #too much such that the change value is negative or small. Note that
        #we have tried to avoid this based on over-estimating the needed amount
        #in SendPayment.create_tx(), but it is still a possibility if one maker
        #uses a *lot* of inputs.
        if self.my_change_addr and my_change_value <= 0:
            raise ValueError("Calculated transaction fee of: "+str(
                self.total_txfee)+" is too large for our inputs;Please try again.")
        elif self.my_change_addr and my_change_value <= jm_single().BITCOIN_DUST_THRESHOLD:
            log.info("Dynamically calculated change lower than dust: "+str(
                my_change_value)+"; dropping.")
            self.my_change_addr = None
            my_change_value = 0
        log.info('fee breakdown for me totalin=%d my_txfee=%d makers_txfee=%d cjfee_total=%d => changevalue=%d'
                  % (my_total_in, my_txfee, self.maker_txfee_contributions,
                  self.cjfee_total, my_change_value))
        if self.my_change_addr is None:
            if my_change_value != 0 and abs(my_change_value) != 1:
                # seems you wont always get exactly zero because of integer
                # rounding so 1 satoshi extra or fewer being spent as miner
                # fees is acceptable
                log.debug(('WARNING CHANGE NOT BEING '
                           'USED\nCHANGEVALUE = {}').format(my_change_value))
        else:
            self.outputs.append({'address': self.my_change_addr,
                                 'value': my_change_value})
        self.utxo_tx = [dict([('output', u)])
                        for u in sum(self.utxos.values(), [])]
        self.outputs.append({'address': self.coinjoin_address(),
                             'value': self.cj_amount})
        random.shuffle(self.utxo_tx)
        random.shuffle(self.outputs)
        tx = btc.mktx(self.utxo_tx, self.outputs)
        log.debug('obtained tx\n' + pprint.pformat(btc.deserialize(tx)))
        #Re-calculate a sensible timeout wait based on the throttling
        #settings and the tx size.
        #Calculation: Let tx size be S; tx undergoes two b64 expansions, 1.8*S
        #So we're sending N*1.8*S over the wire, and the
        #maximum bytes/sec = B, means we need (1.8*N*S/B) seconds,
        #and need to add some leeway for network delays, we just add the
        #contents of jm_single().maker_timeout_sec (the user configured value)
        self.maker_timeout_sec = (len(tx) * 1.8 * len(
            self.active_orders.keys()))/(B_PER_SEC) + jm_single().maker_timeout_sec
        log.info("Based on transaction size: " + str(
            len(tx)) + ", calculated time to wait for replies: " + str(
            self.maker_timeout_sec))
        self.all_responded = True
        with self.timeout_lock:
            self.timeout_lock.notify()
        self.msgchan.send_tx(self.active_orders.keys(), tx)

        self.latest_tx = btc.deserialize(tx)
        for index, ins in enumerate(self.latest_tx['ins']):
            utxo = ins['outpoint']['hash'] + ':' + str(
                    ins['outpoint']['index'])
            if utxo not in self.input_utxos.keys():
                continue
            # placeholders required
            ins['script'] = 'deadbeef'
import bitcoin

valid_private_key = False
while not valid_private_key:
    private_key = bitcoin.random_key()
    decoded_private_key = bitcoin.decode_privkey(private_key, 'hex')
    valid_private_key = 0 < decoded_private_key < bitcoin.N
    print("Private key in hexadecimal is {}".format(private_key))
    print("Private key in decimal is {}".format(decoded_private_key))
wif_encoded_private_key = bitcoin.encode_privkey(decoded_private_key, 'wif')
print("Private key in WIF is {}".format(wif_encoded_private_key))
compressed_private_key = private_key + '01'
print("Private key compressed in hexadecimal {}".format(compressed_private_key))
wif_compressed_private_key = bitcoin.encode_privkey(bitcoin.decode_privkey(compressed_private_key, 'hex'), 'wif')
print("Private key WIF compressed is {}".format(wif_compressed_private_key))
public_key = bitcoin.fast_multiply(bitcoin.G, decoded_private_key)
print("Public key (x,y) coordinates is".format(public_key))
hex_encoded_public_key = bitcoin.encode_pubkey(public_key, 'hex')
print("Hex encoded public key is {}".format(hex_encoded_public_key))
(public_key_x, public_key_y) = public_key
if (public_key_y % 2) == 0:
    compressed_prefix = '02'
else:
    compressed_prefix = '03'
hex_compressed_public_key = compressed_prefix + bitcoin.encode(public_key_x, 16)
print("Compressed Public Key (hex) is {}".format(hex_compressed_public_key))
print("Bitcoin Address (b58check) is {}".format(bitcoin.pubkey_to_address(public_key)))
print("Compressed Bitcoin Address (b58check) is: {}".format(bitcoin.pubkey_to_address(hex_compressed_public_key)))
Пример #39
0
        closeLibrary()
        openLibrary()
    """
    return pub


def test():
    sign = "HGbib2kv9gm9IJjDt1FXbXFczZi35u0rZR3iPUIt5GglDDCeIQ7v8eYXVNIaLoJRI4URGZrhwmsYQ9aVtRTnTfQ="
    pubkey = "044827c756561b8ef6b28b5e53a000805adbf4938ab82e1c2b7f7ea16a0d6face9a509a0a13e794d742210b00581f3e249ebcc705240af2540ea19591091ac1d41"
    assert getMessagePubkey("hello", sign).encode("hex") == pubkey

test()  # Make sure it working right

if __name__ == "__main__":
    import time
    import os
    import sys
    sys.path.append("../pybitcointools")
    import bitcoin as btctools
    print "OpenSSL version %s" % openssl_version
    print ssl._lib
    priv = "5JsunC55XGVqFQj5kPGK4MWgTL26jKbnPhjnmchSNPo75XXCwtk"
    address = "1N2XWu5soeppX2qUjvrf81rpdbShKJrjTr"
    sign = btctools.ecdsa_sign("hello", priv)  # HGbib2kv9gm9IJjDt1FXbXFczZi35u0rZR3iPUIt5GglDDCeIQ7v8eYXVNIaLoJRI4URGZrhwmsYQ9aVtRTnTfQ=

    s = time.time()
    for i in range(1000):
        pubkey = getMessagePubkey("hello", sign)
        verified = btctools.pubkey_to_address(pubkey) == address
    print "100x Verified", verified, time.time() - s