def test_lvmcached_two_logical_volume_init(self):
pv = StorageDevice("pv1",
fmt=blivet.formats.get_format("lvmpv"),
size=Size("1 GiB"))
pv2 = StorageDevice("pv2",
fmt=blivet.formats.get_format("lvmpv"),
size=Size("512 MiB"))
vg = LVMVolumeGroupDevice("testvg", parents=[pv, pv2])
cache_req = LVMCacheRequest(Size("256 MiB"), [pv2], "writethrough")
lv1 = LVMLogicalVolumeDevice("testlv",
parents=[vg],
fmt=blivet.formats.get_format("xfs"),
exists=False,
cache_request=cache_req)
cache_req = LVMCacheRequest(Size("256 MiB"), [pv2], "writethrough")
lv2 = LVMLogicalVolumeDevice("testlv",
parents=[vg],
fmt=blivet.formats.get_format("xfs"),
exists=False,
cache_request=cache_req)
cache = lv1.cache
self.assertIsNotNone(cache)
# 256 MiB - 8 MiB (metadata) - 8 MiB (pmspare)
self.assertEqual(cache.size, Size("240 MiB"))
cache = lv2.cache
self.assertIsNotNone(cache)
# already have pmspare space reserved for lv1's cache (and shared)
# 256 MiB - 8 MiB (metadata) [no pmspare]
self.assertEqual(cache.size, Size("248 MiB"))
def test_vgchunk_with_cache_pvfree(self):
pv = StorageDevice("pv1", size=Size("40 GiB"), fmt=get_format("lvmpv"))
# 1069 MiB so that the PV provides 1068 MiB of free space (see
# LVMVolumeGroupDevice.extents) which is 44 MiB more than the caches
# need and which should thus be split into the LVs
pv2 = StorageDevice("pv2",
size=Size("1069 MiB"),
fmt=get_format("lvmpv"))
vg = LVMVolumeGroupDevice("vg", parents=[pv, pv2])
cache_req1 = LVMCacheRequest(Size("512 MiB"), [pv2], "writethrough")
lv1 = LVMLogicalVolumeDevice("lv1",
parents=[vg],
size=Size("1 GiB"),
grow=True,
cache_request=cache_req1)
cache_req2 = LVMCacheRequest(Size("512 MiB"), [pv2], "writethrough")
lv2 = LVMLogicalVolumeDevice("lv2",
parents=[vg],
size=Size("10 GiB"),
grow=True,
cache_request=cache_req2)
lv3 = LVMLogicalVolumeDevice("lv3",
parents=[vg],
size=Size("10 GiB"),
grow=True,
maxsize=Size("12 GiB"))
req1 = LVRequest(lv1)
req2 = LVRequest(lv2)
req3 = LVRequest(lv3)
chunk = VGChunk(vg, requests=[req1, req2, req3])
chunk.grow_requests()
# the chunk is done growing since its pool has been exhausted
self.assertEqual(chunk.done, True)
# there are still two requests remaining since lv1 and lv2 have no max
self.assertEqual(chunk.remaining, 2)
# All the sizes should be the same as without the caches (see the
# test_vgchunk test for their "rationales") because the space for the
# caches should just be reserved.
# The extra 11 extents available on the pv2 should go in the 1:10 ratio
# to req1 and req2.
self.assertEqual(req1.growth, 395 + 1)
self.assertEqual(req2.growth, 3956 + 10)
self.assertEqual(req3.growth, 512)
def setUp(self):
pv = StorageDevice("pv1", fmt=blivet.formats.get_format("lvmpv"),
size=Size("1 GiB"))
vg = LVMVolumeGroupDevice("testvg", parents=[pv])
self.lv = LVMLogicalVolumeDevice("testlv", parents=[vg],
fmt=blivet.formats.get_format("xfs"))
pv2 = StorageDevice("pv2", fmt=blivet.formats.get_format("lvmpv"),
size=Size("1 GiB"))
pv3 = StorageDevice("pv3", fmt=blivet.formats.get_format("lvmpv"),
size=Size("1 GiB"))
vg2 = LVMVolumeGroupDevice("testvg2", parents=[pv2, pv3])
cache_req = LVMCacheRequest(Size("512 MiB"), [pv3], "writethrough")
self.cached_lv = LVMLogicalVolumeDevice("testcachedlv", parents=[vg2],
fmt=blivet.formats.get_format("xfs"),
exists=False, cache_request=cache_req)
def test_lvmcached_logical_volume_init(self):
pv = StorageDevice("pv1",
fmt=blivet.formats.get_format("lvmpv"),
size=Size("1 GiB"))
pv2 = StorageDevice("pv2",
fmt=blivet.formats.get_format("lvmpv"),
size=Size("512 MiB"))
vg = LVMVolumeGroupDevice("testvg", parents=[pv, pv2])
cache_req = LVMCacheRequest(Size("512 MiB"), [pv2], "writethrough")
xfs_fmt = blivet.formats.get_format("xfs")
lv = LVMLogicalVolumeDevice("testlv",
parents=[vg],
fmt=xfs_fmt,
size=Size(xfs_fmt.min_size),
exists=False,
cache_request=cache_req)
self.assertEqual(lv.size, xfs_fmt.min_size)
# check that the LV behaves like a cached LV
self.assertTrue(lv.cached)
cache = lv.cache
self.assertIsNotNone(cache)
# the cache reserves space for its metadata from the requested size, but
# it may require (and does in this case) a pmspare LV to be allocated
self.assertEqual(lv.vg_space_used,
lv.cache.size + lv.cache.md_size + lv.size)
# check parameters reported by the (non-existing) cache
# 512 MiB - 8 MiB (metadata) - 8 MiB (pmspare)
self.assertEqual(cache.size, Size("496 MiB"))
self.assertEqual(cache.md_size, Size("8 MiB"))
self.assertEqual(cache.vg_space_used, Size("504 MiB"))
self.assertIsInstance(cache.size, Size)
self.assertIsInstance(cache.md_size, Size)
self.assertIsInstance(cache.vg_space_used, Size)
self.assertFalse(cache.exists)
self.assertIsNone(cache.stats)
self.assertEqual(cache.mode, "writethrough")
self.assertIsNone(cache.backing_device_name)
self.assertIsNone(cache.cache_device_name)
self.assertEqual(set(cache.fast_pvs), set([pv2]))
def test_lvm_logical_volume_pv_free_cached(self):
pv = StorageDevice("pv1",
fmt=blivet.formats.get_format("lvmpv"),
size=Size("1025 MiB"))
pv2 = StorageDevice("pv2",
fmt=blivet.formats.get_format("lvmpv"),
size=Size("513 MiB"))
vg = LVMVolumeGroupDevice("testvg", parents=[pv, pv2])
pv_spec = LVPVSpec(pv, Size("256 MiB"))
pv_spec2 = LVPVSpec(pv2, Size("256 MiB"))
cache_req = LVMCacheRequest(Size("512 MiB"), [pv], "writethrough")
lv = LVMLogicalVolumeDevice("testlv",
parents=[vg],
size=Size("512 MiB"),
fmt=blivet.formats.get_format("xfs"),
exists=False,
cache_request=cache_req,
pvs=[pv_spec, pv_spec2])
self.assertEqual(lv.seg_type, "linear")
# 1024 MiB (free) - 256 MiB (LV part) - 504 MiB (cache shrank for pmspare space)
self.assertEqual(pv.format.free, Size("264 MiB"))
self.assertEqual(pv2.format.free, Size("256 MiB"))
grow=True,
parents=[vg],
name="unbounded")
b.create_device(dev)
# new lv with base size 5GiB and growth up to 15GiB and an ext4 filesystem
dev = b.new_lv(fmt_type="ext4",
size=Size("5GiB"),
grow=True,
maxsize=Size("15GiB"),
parents=[vg],
name="bounded")
b.create_device(dev)
# new lv with a fixed size of 2GiB formatted as swap space
cache_spec = LVMCacheRequest(size=Size("1GiB"), pvs=[pv2])
dev = b.new_lv(fmt_type="ext4",
size=Size("2GiB"),
parents=[vg],
name="cached",
cache_request=cache_spec)
b.create_device(dev)
# allocate the growable lvs
blivet.partitioning.grow_lvm(b)
print(b.devicetree)
# write the new partitions to disk and format them as specified
b.do_it()
print(b.devicetree)
input("Check the state and hit ENTER to trigger cleanup")
def _execute_logvol_data(self, storage, data, logvol_data):
"""Execute the logvol data.
:param storage: an instance of the Blivet's storage object
:param data: an instance of kickstart data
:param logvol_data: an instance of LogVolData
"""
devicetree = storage.devicetree
# FIXME: we should be running sanityCheck on partitioning that is not ks
# autopart, but that's likely too invasive for #873135 at this moment
if logvol_data.mountpoint == "/boot" and blivet.arch.is_s390():
raise StorageError(
_("/boot cannot be of type \"lvmlv\" on s390x")
)
# we might have truncated or otherwise changed the specified vg name
vgname = data.onPart.get(logvol_data.vgname, logvol_data.vgname)
size = None
if logvol_data.percent:
size = Size(0)
if logvol_data.mountpoint == "swap":
ty = "swap"
logvol_data.mountpoint = ""
if logvol_data.recommended or logvol_data.hibernation:
disk_space = self._disk_free_space
size = suggest_swap_size(
hibernation=logvol_data.hibernation,
disk_space=disk_space
)
logvol_data.grow = False
else:
if logvol_data.fstype != "":
ty = logvol_data.fstype
else:
ty = storage.default_fstype
if size is None and not logvol_data.preexist:
if not logvol_data.size:
raise StorageError(
_("Size cannot be decided on from kickstart nor obtained from device.")
)
size = self._get_size(logvol_data.size, "MiB")
if logvol_data.thin_pool:
logvol_data.mountpoint = ""
ty = None
# Sanity check mountpoint
self._check_mount_point(logvol_data.mountpoint)
# Check that the VG this LV is a member of has already been specified.
vg = devicetree.get_device_by_name(vgname)
if not vg:
raise StorageError(
_("No volume group exists with the name \"{}\". Specify volume "
"groups before logical volumes.").format(logvol_data.vgname)
)
# If cache PVs specified, check that they belong to the same VG this LV is a member of
if logvol_data.cache_pvs:
pv_devices = self._get_cache_pv_devices(devicetree, logvol_data)
if not all(pv in vg.pvs for pv in pv_devices):
raise StorageError(
_("Cache PVs must belong to the same VG as the cached LV")
)
pool = None
if logvol_data.thin_volume:
pool = devicetree.get_device_by_name("%s-%s" % (vg.name, logvol_data.pool_name))
if not pool:
raise StorageError(
_("No thin pool exists with the name \"{}\". Specify thin pools "
"before thin volumes.").format(logvol_data.pool_name)
)
# If this specifies an existing request that we should not format,
# quit here after setting up enough information to mount it later.
if not logvol_data.format:
if not logvol_data.name:
raise StorageError(
_("logvol --noformat must also use the --name= option.")
)
dev = devicetree.get_device_by_name("%s-%s" % (vg.name, logvol_data.name))
if not dev:
raise StorageError(
_("Logical volume \"{}\" given in logvol command does "
"not exist.").format(logvol_data.name)
)
if logvol_data.resize:
size = dev.raw_device.align_target_size(size)
if size < dev.currentSize:
# shrink
try:
devicetree.actions.add(ActionResizeFormat(dev, size))
devicetree.actions.add(ActionResizeDevice(dev, size))
except ValueError as e:
self._handle_invalid_target_size(e, logvol_data.size, dev.name)
else:
# grow
try:
devicetree.actions.add(ActionResizeDevice(dev, size))
devicetree.actions.add(ActionResizeFormat(dev, size))
except ValueError as e:
self._handle_invalid_target_size(e, logvol_data.size, dev.name)
dev.format.mountpoint = logvol_data.mountpoint
dev.format.mountopts = logvol_data.fsopts
if ty == "swap":
storage.add_fstab_swap(dev)
return
# Make sure this LV name is not already used in the requested VG.
if not logvol_data.preexist:
tmp = devicetree.get_device_by_name("%s-%s" % (vg.name, logvol_data.name))
if tmp:
raise StorageError(
_("Logical volume name \"{}\" is already in use in volume group "
"\"{}\".").format(logvol_data.name, vg.name)
)
if not logvol_data.percent and size and not logvol_data.grow and size < vg.pe_size:
raise StorageError(
_("Logical volume size \"{}\" must be larger than the volume "
"group extent size of \"{}\".").format(size, vg.pe_size)
)
# Now get a format to hold a lot of these extra values.
fmt = get_format(
ty,
mountpoint=logvol_data.mountpoint,
label=logvol_data.label,
fsprofile=logvol_data.fsprofile,
create_options=logvol_data.mkfsopts,
mountopts=logvol_data.fsopts
)
if not fmt.type and not logvol_data.thin_pool:
raise StorageError(
_("The \"{}\" file system type is not supported.").format(ty)
)
add_fstab_swap = None
# If we were given a pre-existing LV to create a filesystem on, we need
# to verify it and its VG exists and then schedule a new format action
# to take place there. Also, we only support a subset of all the
# options on pre-existing LVs.
if logvol_data.preexist:
device = devicetree.get_device_by_name("%s-%s" % (vg.name, logvol_data.name))
if not device:
raise StorageError(
_("Logical volume \"{}\" given in logvol command does "
"not exist.").format(logvol_data.name)
)
storage.devicetree.recursive_remove(device, remove_device=False)
if logvol_data.resize:
size = device.raw_device.align_target_size(size)
try:
devicetree.actions.add(ActionResizeDevice(device, size))
except ValueError as e:
self._handle_invalid_target_size(e, logvol_data.size, device.name)
devicetree.actions.add(ActionCreateFormat(device, fmt))
if ty == "swap":
add_fstab_swap = device
else:
# If a previous device has claimed this mount point, delete the
# old one.
try:
if logvol_data.mountpoint:
device = storage.mountpoints[logvol_data.mountpoint]
storage.destroy_device(device)
except KeyError:
pass
if logvol_data.thin_volume:
parents = [pool]
else:
parents = [vg]
pool_args = {}
if logvol_data.thin_pool:
if logvol_data.profile:
matching = (p for p in KNOWN_THPOOL_PROFILES if p.name == logvol_data.profile)
profile = next(matching, None)
if profile:
pool_args["profile"] = profile
else:
log.warning(
"No matching profile for %s found in LVM configuration",
logvol_data.profile
)
if logvol_data.metadata_size:
pool_args["metadata_size"] = Size("%d MiB" % logvol_data.metadata_size)
if logvol_data.chunk_size:
pool_args["chunk_size"] = Size("%d KiB" % logvol_data.chunk_size)
if logvol_data.maxSizeMB:
maxsize = self._get_size(logvol_data.maxSizeMB, "MiB")
else:
maxsize = None
if logvol_data.cache_size and logvol_data.cache_pvs:
pv_devices = self._get_cache_pv_devices(devicetree, logvol_data)
cache_size = Size("%d MiB" % logvol_data.cache_size)
cache_mode = logvol_data.cache_mode or None
cache_request = LVMCacheRequest(cache_size, pv_devices, cache_mode)
else:
cache_request = None
request = storage.new_lv(
fmt=fmt,
name=logvol_data.name,
parents=parents,
size=size,
thin_pool=logvol_data.thin_pool,
thin_volume=logvol_data.thin_volume,
grow=logvol_data.grow,
maxsize=maxsize,
percent=logvol_data.percent,
cache_request=cache_request,
**pool_args
)
storage.create_device(request)
if ty == "swap":
add_fstab_swap = request
if logvol_data.encrypted:
passphrase = self._get_passphrase(logvol_data)
cert = storage.get_escrow_certificate(logvol_data.escrowcert)
# Get the version of LUKS and PBKDF arguments.
logvol_data.luks_version = logvol_data.luks_version or storage.default_luks_version
pbkdf_args = get_pbkdf_args(
luks_version=logvol_data.luks_version,
pbkdf_type=logvol_data.pbkdf,
max_memory_kb=logvol_data.pbkdf_memory,
iterations=logvol_data.pbkdf_iterations,
time_ms=logvol_data.pbkdf_time
)
if pbkdf_args and not luks_data.pbkdf_args:
luks_data.pbkdf_args = pbkdf_args
if logvol_data.preexist:
luksformat = fmt
device.format = get_format(
"luks",
passphrase=passphrase,
device=device.path,
cipher=logvol_data.cipher,
escrow_cert=cert,
add_backup_passphrase=logvol_data.backuppassphrase,
luks_version=logvol_data.luks_version,
pbkdf_args=pbkdf_args
)
luksdev = LUKSDevice(
"luks%d" % storage.next_id,
fmt=luksformat,
parents=device
)
else:
luksformat = request.format
request.format = get_format(
"luks",
passphrase=passphrase,
cipher=logvol_data.cipher,
escrow_cert=cert,
add_backup_passphrase=logvol_data.backuppassphrase,
luks_version=logvol_data.luks_version,
pbkdf_args=pbkdf_args
)
luksdev = LUKSDevice(
"luks%d" % storage.next_id,
fmt=luksformat,
parents=request
)
if ty == "swap":
# swap is on the LUKS device not on the LUKS' parent device,
# override the info here
add_fstab_swap = luksdev
storage.create_device(luksdev)
if add_fstab_swap:
storage.add_fstab_swap(add_fstab_swap)