def setUp(self):
disk1 = DiskDevice("testdisk", size=Size("300 GiB"), exists=True,
fmt=get_format("disklabel", exists=True))
disk1.format._supported = False
with self.assertLogs("blivet", level="INFO") as cm:
partition1 = PartitionDevice("testpart1", size=Size("150 GiB"), exists=True,
parents=[disk1], fmt=get_format("ext4", exists=True))
self.assertTrue("disklabel is unsupported" in "\n".join(cm.output))
with self.assertLogs("blivet", level="INFO") as cm:
partition2 = PartitionDevice("testpart2", size=Size("100 GiB"), exists=True,
parents=[disk1], fmt=get_format("lvmpv", exists=True))
self.assertTrue("disklabel is unsupported" in "\n".join(cm.output))
# To be supported, all of a devices ancestors must be supported.
disk2 = DiskDevice("testdisk2", size=Size("300 GiB"), exists=True,
fmt=get_format("lvmpv", exists=True))
vg = LVMVolumeGroupDevice("testvg", exists=True, parents=[partition2, disk2])
lv = LVMLogicalVolumeDevice("testlv", exists=True, size=Size("64 GiB"),
parents=[vg], fmt=get_format("ext4", exists=True))
with sparsetmpfile("addparttest", Size("50 MiB")) as disk_file:
disk3 = DiskFile(disk_file)
disk3.format = get_format("disklabel", device=disk3.path, exists=False)
self.disk1 = disk1
self.disk2 = disk2
self.disk3 = disk3
self.partition1 = partition1
self.partition2 = partition2
self.vg = vg
self.lv = lv
def test_msdos_disk_chunk1(self):
disk_size = Size("100 MiB")
with sparsetmpfile("chunktest", disk_size) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel",
device=disk.path,
exists=False,
label_type="msdos")
p1 = PartitionDevice("p1", size=Size("10 MiB"), grow=True)
p2 = PartitionDevice("p2", size=Size("30 MiB"), grow=True)
disks = [disk]
partitions = [p1, p2]
free = get_free_regions([disk])
self.assertEqual(len(free), 1,
"free region count %d not expected" % len(free))
b = Mock(spec=Blivet)
allocate_partitions(b, disks, partitions, free)
requests = [PartitionRequest(p) for p in partitions]
chunk = DiskChunk(free[0], requests=requests)
# parted reports a first free sector of 32 for msdos on disk files. whatever.
# XXX on gpt, the start is increased to 34 and the end is reduced from 204799 to 204766,
# yielding an expected length of 204733
length_expected = 204768
self.assertEqual(chunk.length, length_expected)
base_expected = sum(p.parted_partition.geometry.length
for p in partitions)
self.assertEqual(chunk.base, base_expected)
pool_expected = chunk.length - base_expected
self.assertEqual(chunk.pool, pool_expected)
self.assertEqual(chunk.done, False)
self.assertEqual(chunk.remaining, 2)
chunk.grow_requests()
self.assertEqual(chunk.done, True)
self.assertEqual(chunk.pool, 0)
self.assertEqual(chunk.remaining, 2)
#
# validate the growth (everything in sectors)
#
# The chunk length is 204768. The base of p1 is 20480. The base of
# p2 is 61440. The chunk has a base of 81920 and a pool of 122848.
#
# p1 should grow by 30712 while p2 grows by 92136 since p2's base
# size is exactly three times that of p1.
self.assertEqual(requests[0].growth, 30712)
self.assertEqual(requests[1].growth, 92136)
def test_msdos_disk_chunk1(self):
disk_size = Size("100 MiB")
with sparsetmpfile("chunktest", disk_size) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel", device=disk.path, exists=False, label_type="msdos")
p1 = PartitionDevice("p1", size=Size("10 MiB"), grow=True)
p2 = PartitionDevice("p2", size=Size("30 MiB"), grow=True)
disks = [disk]
partitions = [p1, p2]
free = get_free_regions([disk])
self.assertEqual(len(free), 1,
"free region count %d not expected" % len(free))
b = Mock(spec=Blivet)
allocate_partitions(b, disks, partitions, free)
requests = [PartitionRequest(p) for p in partitions]
chunk = DiskChunk(free[0], requests=requests)
# parted reports a first free sector of 32 for msdos on disk files. whatever.
# XXX on gpt, the start is increased to 34 and the end is reduced from 204799 to 204766,
# yielding an expected length of 204733
length_expected = 204768
self.assertEqual(chunk.length, length_expected)
base_expected = sum(p.parted_partition.geometry.length for p in partitions)
self.assertEqual(chunk.base, base_expected)
pool_expected = chunk.length - base_expected
self.assertEqual(chunk.pool, pool_expected)
self.assertEqual(chunk.done, False)
self.assertEqual(chunk.remaining, 2)
chunk.grow_requests()
self.assertEqual(chunk.done, True)
self.assertEqual(chunk.pool, 0)
self.assertEqual(chunk.remaining, 2)
#
# validate the growth (everything in sectors)
#
# The chunk length is 204768. The base of p1 is 20480. The base of
# p2 is 61440. The chunk has a base of 81920 and a pool of 122848.
#
# p1 should grow by 30712 while p2 grows by 92136 since p2's base
# size is exactly three times that of p1.
self.assertEqual(requests[0].growth, 30712)
self.assertEqual(requests[1].growth, 92136)
def setUp(self):
disk1 = DiskDevice("testdisk",
size=Size("300 GiB"),
exists=True,
fmt=get_format("disklabel", exists=True))
disk1.format._supported = False
with self.assertLogs("blivet", level="INFO") as cm:
partition1 = PartitionDevice("testpart1",
size=Size("150 GiB"),
exists=True,
parents=[disk1],
fmt=get_format("ext4", exists=True))
self.assertTrue("disklabel is unsupported" in "\n".join(cm.output))
with self.assertLogs("blivet", level="INFO") as cm:
partition2 = PartitionDevice("testpart2",
size=Size("100 GiB"),
exists=True,
parents=[disk1],
fmt=get_format("lvmpv", exists=True))
self.assertTrue("disklabel is unsupported" in "\n".join(cm.output))
# To be supported, all of a devices ancestors must be supported.
disk2 = DiskDevice("testdisk2",
size=Size("300 GiB"),
exists=True,
fmt=get_format("lvmpv", exists=True))
vg = LVMVolumeGroupDevice("testvg",
exists=True,
parents=[partition2, disk2])
lv = LVMLogicalVolumeDevice("testlv",
exists=True,
size=Size("64 GiB"),
parents=[vg],
fmt=get_format("ext4", exists=True))
with sparsetmpfile("addparttest", Size("50 MiB")) as disk_file:
disk3 = DiskFile(disk_file)
disk3.format = get_format("disklabel",
device=disk3.path,
exists=False)
self.disk1 = disk1
self.disk2 = disk2
self.disk3 = disk3
self.partition1 = partition1
self.partition2 = partition2
self.vg = vg
self.lv = lv
def test_extended_min_size(self):
with sparsetmpfile("extendedtest", Size("10 MiB")) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel",
device=disk.path,
label_type="msdos")
grain_size = Size(disk.format.alignment.grainSize)
sector_size = Size(disk.format.parted_device.sectorSize)
extended_start = int(grain_size)
extended_end = extended_start + int(Size("6 MiB") / sector_size)
disk.format.add_partition(extended_start, extended_end,
parted.PARTITION_EXTENDED)
extended = disk.format.extended_partition
self.assertNotEqual(extended, None)
extended_device = PartitionDevice(os.path.basename(extended.path))
extended_device.disk = disk
extended_device.exists = True
extended_device.parted_partition = extended
# existing extended partition should be always resizable
self.assertTrue(extended_device.resizable)
# no logical partitions --> min size should be max of 1 KiB and grain_size
self.assertEqual(
extended_device.min_size,
extended_device.align_target_size(
max(grain_size, Size("1 KiB"))))
logical_start = extended_start + 1
logical_end = extended_end // 2
disk.format.add_partition(logical_start, logical_end,
parted.PARTITION_LOGICAL)
logical = disk.format.parted_disk.getPartitionBySector(
logical_start)
self.assertNotEqual(logical, None)
logical_device = PartitionDevice(os.path.basename(logical.path))
logical_device.disk = disk
logical_device.exists = True
logical_device.parted_partition = logical
# logical partition present --> min size should be based on its end sector
end_free = (extended_end - logical_end) * sector_size
self.assertEqual(
extended_device.min_size,
extended_device.align_target_size(
extended_device.current_size - end_free))
def setUp(self):
if self.device_type is None:
raise unittest.SkipTest("abstract base class")
self.b = blivet.Blivet() # don't populate it
self.disk_files = [create_sparse_tempfile("factorytest", Size("2 GiB")),
create_sparse_tempfile("factorytest", Size("2 GiB"))]
for filename in self.disk_files:
disk = DiskFile(filename)
self.b.devicetree._add_device(disk)
self.b.initialize_disk(disk)
self.addCleanup(self._clean_up_disk_files)
def test_extended_min_size(self):
with sparsetmpfile("extendedtest", Size("10 MiB")) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel", device=disk.path, label_type="msdos")
grain_size = Size(disk.format.alignment.grainSize)
sector_size = Size(disk.format.parted_device.sectorSize)
extended_start = int(grain_size)
extended_end = extended_start + int(Size("6 MiB") / sector_size)
disk.format.add_partition(extended_start, extended_end, parted.PARTITION_EXTENDED)
extended = disk.format.extended_partition
self.assertNotEqual(extended, None)
extended_device = PartitionDevice(os.path.basename(extended.path))
extended_device.disk = disk
extended_device.exists = True
extended_device.parted_partition = extended
# no logical partitions --> min size should be max of 1 KiB and grain_size
self.assertEqual(extended_device.min_size,
extended_device.align_target_size(max(grain_size, Size("1 KiB"))))
logical_start = extended_start + 1
logical_end = extended_end // 2
disk.format.add_partition(logical_start, logical_end, parted.PARTITION_LOGICAL)
logical = disk.format.parted_disk.getPartitionBySector(logical_start)
self.assertNotEqual(logical, None)
logical_device = PartitionDevice(os.path.basename(logical.path))
logical_device.disk = disk
logical_device.exists = True
logical_device.parted_partition = logical
# logical partition present --> min size should be based on its end sector
end_free = (extended_end - logical_end) * sector_size
self.assertEqual(extended_device.min_size,
extended_device.align_target_size(extended_device.current_size - end_free))
def test_msdos_disk_chunk2(self):
disk_size = Size("100 MiB")
with sparsetmpfile("chunktest", disk_size) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel", device=disk.path, exists=False, label_type="msdos")
p1 = PartitionDevice("p1", size=Size("10 MiB"), grow=True)
p2 = PartitionDevice("p2", size=Size("30 MiB"), grow=True)
# format max size should be reflected in request max growth
fmt = get_format("dummy")
fmt._max_size = Size("12 MiB")
p3 = PartitionDevice("p3", size=Size("10 MiB"), grow=True,
fmt=fmt)
p4 = PartitionDevice("p4", size=Size("7 MiB"))
# partition max size should be reflected in request max growth
p5 = PartitionDevice("p5", size=Size("5 MiB"), grow=True,
maxsize=Size("6 MiB"))
disks = [disk]
partitions = [p1, p2, p3, p4, p5]
free = get_free_regions([disk])
self.assertEqual(len(free), 1,
"free region count %d not expected" % len(free))
b = Mock(spec=Blivet)
allocate_partitions(b, disks, partitions, free)
requests = [PartitionRequest(p) for p in partitions]
chunk = DiskChunk(free[0], requests=requests)
self.assertEqual(len(chunk.requests), len(partitions))
# parted reports a first free sector of 32 for disk files. whatever.
length_expected = 204768
self.assertEqual(chunk.length, length_expected)
growable = [p for p in partitions if p.req_grow]
fixed = [p for p in partitions if not p.req_grow]
base_expected = sum(p.parted_partition.geometry.length for p in growable)
self.assertEqual(chunk.base, base_expected)
base_fixed = sum(p.parted_partition.geometry.length for p in fixed)
pool_expected = chunk.length - base_expected - base_fixed
self.assertEqual(chunk.pool, pool_expected)
self.assertEqual(chunk.done, False)
# since p5 is not growable it is initially done
self.assertEqual(chunk.remaining, 4)
chunk.grow_requests()
#
# validate the growth (in sectors)
#
# The chunk length is 204768.
# Request bases:
# p1 20480
# p2 61440
# p3 20480
# p4 14336 (not included in chunk base since it isn't growable)
# p5 10240
#
# The chunk has a base 112640 and a pool of 77792.
#
# Request max growth:
# p1 0
# p2 0
# p3 4096
# p4 0
# p5 2048
#
# The first round should allocate to p1, p2, p3, p5 at a ratio of
# 2:6:2:1, which is 14144, 42432, 14144, 7072. Due to max growth,
# p3 and p5 will be limited and the extra (10048, 5024) will remain
# in the pool. In the second round the remaining requests will be
# p1 and p2. They will divide up the pool of 15072 at a ratio of
# 1:3, which is 3768 and 11304. At this point the pool should be
# empty.
#
# Total growth:
# p1 17912
# p2 53736
# p3 4096
# p4 0
# p5 2048
#
self.assertEqual(chunk.done, True)
self.assertEqual(chunk.pool, 0)
self.assertEqual(chunk.remaining, 2) # p1, p2 have no max
# chunk.requests got sorted, so use the list whose order we know
self.assertEqual(requests[0].growth, 17912)
self.assertEqual(requests[1].growth, 53736)
self.assertEqual(requests[2].growth, 4096)
self.assertEqual(requests[3].growth, 0)
self.assertEqual(requests[4].growth, 2048)
def test_add_partition(self):
with sparsetmpfile("addparttest", Size("50 MiB")) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel", device=disk.path, exists=False, label_type="msdos")
free = disk.format.parted_disk.getFreeSpaceRegions()[0]
#
# add a partition with an unaligned size
#
self.assertEqual(len(disk.format.partitions), 0)
part = add_partition(disk.format, free, parted.PARTITION_NORMAL,
Size("10 MiB") - Size(37))
self.assertEqual(len(disk.format.partitions), 1)
# an unaligned size still yields an aligned partition
alignment = disk.format.alignment
geom = part.geometry
sector_size = Size(geom.device.sectorSize)
self.assertEqual(alignment.isAligned(free, geom.start), True)
self.assertEqual(alignment.isAligned(free, geom.end + 1), True)
self.assertEqual(part.geometry.length, int(Size("10 MiB") // sector_size))
disk.format.remove_partition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# adding a partition smaller than the optimal io size should yield
# a partition aligned using the minimal io size instead
#
opt_str = 'parted.Device.optimumAlignment'
min_str = 'parted.Device.minimumAlignment'
opt_al = parted.Alignment(offset=0, grainSize=8192) # 4 MiB
min_al = parted.Alignment(offset=0, grainSize=2048) # 1 MiB
with patch(opt_str, opt_al) as optimal, patch(min_str, min_al) as minimal:
optimal_end = disk.format.get_end_alignment(alignment=optimal)
minimal_end = disk.format.get_end_alignment(alignment=minimal)
sector_size = Size(disk.format.sector_size)
length = 4096 # 2 MiB
size = Size(sector_size * length)
part = add_partition(disk.format, free, parted.PARTITION_NORMAL,
size)
self.assertEqual(part.geometry.length, length)
self.assertEqual(optimal.isAligned(free, part.geometry.start),
False)
self.assertEqual(minimal.isAligned(free, part.geometry.start),
True)
self.assertEqual(optimal_end.isAligned(free, part.geometry.end),
False)
self.assertEqual(minimal_end.isAligned(free, part.geometry.end),
True)
disk.format.remove_partition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# add a partition with an unaligned start sector
#
start_sector = 5003
end_sector = 15001
part = add_partition(disk.format, free, parted.PARTITION_NORMAL,
None, start_sector, end_sector)
self.assertEqual(len(disk.format.partitions), 1)
# start and end sectors are exactly as specified
self.assertEqual(part.geometry.start, start_sector)
self.assertEqual(part.geometry.end, end_sector)
disk.format.remove_partition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# fail: add a logical partition to a primary free region
#
with six.assertRaisesRegex(self, parted.PartitionException,
"no extended partition"):
part = add_partition(disk.format, free, parted.PARTITION_LOGICAL,
Size("10 MiB"))
# add an extended partition to the disk
placeholder = add_partition(disk.format, free,
parted.PARTITION_NORMAL, Size("10 MiB"))
all_free = disk.format.parted_disk.getFreeSpaceRegions()
add_partition(disk.format, all_free[1],
parted.PARTITION_EXTENDED, Size("30 MiB"),
alignment.alignUp(all_free[1],
placeholder.geometry.end))
disk.format.remove_partition(placeholder)
self.assertEqual(len(disk.format.partitions), 1)
all_free = disk.format.parted_disk.getFreeSpaceRegions()
#
# add a logical partition to an extended free regions
#
part = add_partition(disk.format, all_free[1],
parted.PARTITION_LOGICAL,
Size("10 MiB"), all_free[1].start)
self.assertEqual(part.type, parted.PARTITION_LOGICAL)
disk.format.remove_partition(part)
self.assertEqual(len(disk.format.partitions), 1)
#
# fail: add a primary partition to an extended free region
#
with six.assertRaisesRegex(self, parted.PartitionException, "overlap"):
part = add_partition(disk.format, all_free[1],
parted.PARTITION_NORMAL,
Size("10 MiB"), all_free[1].start)
def test_target_size(self):
with sparsetmpfile("targetsizetest", Size("10 MiB")) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel", device=disk.path, label_type="msdos")
grain_size = Size(disk.format.alignment.grainSize)
sector_size = Size(disk.format.parted_device.sectorSize)
start = int(grain_size)
orig_size = Size("6 MiB")
end = start + int(orig_size / sector_size) - 1
disk.format.add_partition(start, end)
partition = disk.format.parted_disk.getPartitionBySector(start)
self.assertNotEqual(partition, None)
self.assertEqual(orig_size, Size(partition.getLength(unit='B')))
device = PartitionDevice(os.path.basename(partition.path),
size=orig_size)
device.disk = disk
device.exists = True
device.parted_partition = partition
device.format = get_format("ext4", device=device.path)
device.format.exists = True
# grain size should be 1 MiB
device.format._min_instance_size = Size("2 MiB") + (grain_size / 2)
device.format._resizable = True
# Make sure things are as expected to begin with.
self.assertEqual(device.size, orig_size)
self.assertEqual(device.min_size, Size("3 MiB"))
# start sector's at 1 MiB
self.assertEqual(device.max_size, Size("9 MiB"))
# ValueError if not Size
with six.assertRaisesRegex(self, ValueError,
"new size must.*type Size"):
device.target_size = 22
self.assertEqual(device.target_size, orig_size)
# ValueError if size smaller than min_size
with six.assertRaisesRegex(self, ValueError,
"size.*smaller than the minimum"):
device.target_size = Size("1 MiB")
self.assertEqual(device.target_size, orig_size)
# ValueError if size larger than max_size
with six.assertRaisesRegex(self, ValueError,
"size.*larger than the maximum"):
device.target_size = Size("11 MiB")
self.assertEqual(device.target_size, orig_size)
# ValueError if unaligned
with six.assertRaisesRegex(self, ValueError, "new size.*not.*aligned"):
device.target_size = Size("3.1 MiB")
self.assertEqual(device.target_size, orig_size)
# successfully set a new target size
new_target = device.max_size
device.target_size = new_target
self.assertEqual(device.target_size, new_target)
self.assertEqual(device.size, new_target)
parted_size = Size(device.parted_partition.getLength(unit='B'))
self.assertEqual(parted_size, device.target_size)
# reset target size to original size
device.target_size = orig_size
self.assertEqual(device.target_size, orig_size)
self.assertEqual(device.size, orig_size)
parted_size = Size(device.parted_partition.getLength(unit='B'))
self.assertEqual(parted_size, device.target_size)
def test_min_max_size_alignment(self):
with sparsetmpfile("minsizetest", Size("10 MiB")) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel", device=disk.path)
grain_size = Size(disk.format.alignment.grainSize)
sector_size = Size(disk.format.parted_device.sectorSize)
start = int(grain_size)
end = start + int(Size("6 MiB") / sector_size)
disk.format.add_partition(start, end)
partition = disk.format.parted_disk.getPartitionBySector(start)
self.assertNotEqual(partition, None)
device = PartitionDevice(os.path.basename(partition.path))
device.disk = disk
device.exists = True
device.parted_partition = partition
# Typical sector size is 512 B.
# Default optimum alignment grain size is 2048 sectors, or 1 MiB.
device.format = get_format("ext4", device=device.path)
device.format.exists = True
device.format._min_instance_size = Size("2 MiB") + (grain_size / 2)
device.format._resizable = True
##
# min_size
##
# The end sector based only on format min size should be unaligned.
min_sectors = int(device.format.min_size / sector_size)
min_end_sector = partition.geometry.start + min_sectors - 1
self.assertEqual(
disk.format.end_alignment.isAligned(partition.geometry,
min_end_sector),
False)
# The end sector based on device min size should be aligned.
min_sectors = int(device.min_size / sector_size)
min_end_sector = partition.geometry.start + min_sectors - 1
self.assertEqual(
disk.format.end_alignment.isAligned(partition.geometry,
min_end_sector),
True)
##
# max_size
##
# Add a partition starting three sectors past an aligned sector and
# extending to the end of the disk so that there's a free region
# immediately following the first partition with an unaligned end
# sector.
free = disk.format.parted_disk.getFreeSpaceRegions()[-1]
raw_start = int(Size("9 MiB") / sector_size)
start = disk.format.alignment.alignUp(free, raw_start) + 3
disk.format.add_partition(start, disk.format.parted_device.length - 1)
# Verify the end of the free region immediately following the first
# partition is unaligned.
free = disk.format.parted_disk.getFreeSpaceRegions()[1]
self.assertEqual(disk.format.end_alignment.isAligned(free, free.end),
False)
# The end sector based on device min size should be aligned.
max_sectors = int(device.max_size / sector_size)
max_end_sector = partition.geometry.start + max_sectors - 1
self.assertEqual(
disk.format.end_alignment.isAligned(free, max_end_sector),
True)
def test_disk_chunk2(self):
disk_size = Size("100 MiB")
with sparsetmpfile("chunktest", disk_size) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel",
device=disk.path,
exists=False)
p1 = PartitionDevice("p1", size=Size("10 MiB"), grow=True)
p2 = PartitionDevice("p2", size=Size("30 MiB"), grow=True)
# format max size should be reflected in request max growth
fmt = get_format("dummy")
fmt._max_size = Size("12 MiB")
p3 = PartitionDevice("p3", size=Size("10 MiB"), grow=True, fmt=fmt)
p4 = PartitionDevice("p4", size=Size("7 MiB"))
# partition max size should be reflected in request max growth
p5 = PartitionDevice("p5",
size=Size("5 MiB"),
grow=True,
maxsize=Size("6 MiB"))
disks = [disk]
partitions = [p1, p2, p3, p4, p5]
free = get_free_regions([disk])
self.assertEqual(len(free), 1,
"free region count %d not expected" % len(free))
b = Mock(spec=Blivet)
allocate_partitions(b, disks, partitions, free)
requests = [PartitionRequest(p) for p in partitions]
chunk = DiskChunk(free[0], requests=requests)
self.assertEqual(len(chunk.requests), len(partitions))
# parted reports a first free sector of 32 for disk files. whatever.
length_expected = 204768
self.assertEqual(chunk.length, length_expected)
growable = [p for p in partitions if p.req_grow]
fixed = [p for p in partitions if not p.req_grow]
base_expected = sum(p.parted_partition.geometry.length
for p in growable)
self.assertEqual(chunk.base, base_expected)
base_fixed = sum(p.parted_partition.geometry.length for p in fixed)
pool_expected = chunk.length - base_expected - base_fixed
self.assertEqual(chunk.pool, pool_expected)
self.assertEqual(chunk.done, False)
# since p5 is not growable it is initially done
self.assertEqual(chunk.remaining, 4)
chunk.grow_requests()
#
# validate the growth (in sectors)
#
# The chunk length is 204768.
# Request bases:
# p1 20480
# p2 61440
# p3 20480
# p4 14336 (not included in chunk base since it isn't growable)
# p5 10240
#
# The chunk has a base 112640 and a pool of 77792.
#
# Request max growth:
# p1 0
# p2 0
# p3 4096
# p4 0
# p5 2048
#
# The first round should allocate to p1, p2, p3, p5 at a ratio of
# 2:6:2:1, which is 14144, 42432, 14144, 7072. Due to max growth,
# p3 and p5 will be limited and the extra (10048, 5024) will remain
# in the pool. In the second round the remaining requests will be
# p1 and p2. They will divide up the pool of 15072 at a ratio of
# 1:3, which is 3768 and 11304. At this point the pool should be
# empty.
#
# Total growth:
# p1 17912
# p2 53736
# p3 4096
# p4 0
# p5 2048
#
self.assertEqual(chunk.done, True)
self.assertEqual(chunk.pool, 0)
self.assertEqual(chunk.remaining, 2) # p1, p2 have no max
# chunk.requests got sorted, so use the list whose order we know
self.assertEqual(requests[0].growth, 17912)
self.assertEqual(requests[1].growth, 53736)
self.assertEqual(requests[2].growth, 4096)
self.assertEqual(requests[3].growth, 0)
self.assertEqual(requests[4].growth, 2048)
def test_add_partition(self):
with sparsetmpfile("addparttest", Size("50 MiB")) as disk_file:
disk = DiskFile(disk_file)
disk.format = get_format("disklabel",
device=disk.path,
exists=False)
free = disk.format.parted_disk.getFreeSpaceRegions()[0]
#
# add a partition with an unaligned size
#
self.assertEqual(len(disk.format.partitions), 0)
part = add_partition(disk.format, free, parted.PARTITION_NORMAL,
Size("10 MiB") - Size(37))
self.assertEqual(len(disk.format.partitions), 1)
# an unaligned size still yields an aligned partition
alignment = disk.format.alignment
geom = part.geometry
sector_size = Size(geom.device.sectorSize)
self.assertEqual(alignment.isAligned(free, geom.start), True)
self.assertEqual(alignment.isAligned(free, geom.end + 1), True)
self.assertEqual(part.geometry.length,
int(Size("10 MiB") // sector_size))
disk.format.remove_partition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# adding a partition smaller than the optimal io size should yield
# a partition aligned using the minimal io size instead
#
opt_str = 'parted.Device.optimumAlignment'
min_str = 'parted.Device.minimumAlignment'
opt_al = parted.Alignment(offset=0, grainSize=8192) # 4 MiB
min_al = parted.Alignment(offset=0, grainSize=2048) # 1 MiB
with patch(opt_str, opt_al) as optimal, patch(min_str,
min_al) as minimal:
optimal_end = disk.format.get_end_alignment(alignment=optimal)
minimal_end = disk.format.get_end_alignment(alignment=minimal)
sector_size = Size(disk.format.sector_size)
length = 4096 # 2 MiB
size = Size(sector_size * length)
part = add_partition(disk.format, free,
parted.PARTITION_NORMAL, size)
self.assertEqual(part.geometry.length, length)
self.assertEqual(optimal.isAligned(free, part.geometry.start),
False)
self.assertEqual(minimal.isAligned(free, part.geometry.start),
True)
self.assertEqual(
optimal_end.isAligned(free, part.geometry.end), False)
self.assertEqual(
minimal_end.isAligned(free, part.geometry.end), True)
disk.format.remove_partition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# add a partition with an unaligned start sector
#
start_sector = 5003
end_sector = 15001
part = add_partition(disk.format, free, parted.PARTITION_NORMAL,
None, start_sector, end_sector)
self.assertEqual(len(disk.format.partitions), 1)
# start and end sectors are exactly as specified
self.assertEqual(part.geometry.start, start_sector)
self.assertEqual(part.geometry.end, end_sector)
disk.format.remove_partition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# fail: add a logical partition to a primary free region
#
with self.assertRaisesRegex(parted.PartitionException,
"no extended partition"):
part = add_partition(disk.format, free,
parted.PARTITION_LOGICAL, Size("10 MiB"))
# add an extended partition to the disk
placeholder = add_partition(disk.format,
free, parted.PARTITION_NORMAL,
Size("10 MiB"))
all_free = disk.format.parted_disk.getFreeSpaceRegions()
add_partition(
disk.format, all_free[1], parted.PARTITION_EXTENDED,
Size("30 MiB"),
alignment.alignUp(all_free[1], placeholder.geometry.end))
disk.format.remove_partition(placeholder)
self.assertEqual(len(disk.format.partitions), 1)
all_free = disk.format.parted_disk.getFreeSpaceRegions()
#
# add a logical partition to an extended free regions
#
part = add_partition(disk.format,
all_free[1], parted.PARTITION_LOGICAL,
Size("10 MiB"), all_free[1].start)
self.assertEqual(part.type, parted.PARTITION_LOGICAL)
disk.format.remove_partition(part)
self.assertEqual(len(disk.format.partitions), 1)
#
# fail: add a primary partition to an extended free region
#
with self.assertRaisesRegex(parted.PartitionException, "overlap"):
part = add_partition(disk.format,
all_free[1], parted.PARTITION_NORMAL,
Size("10 MiB"), all_free[1].start)
def test_weak_dependencies(self):
self.bvt = blivet.Blivet() # pylint: disable=attribute-defined-outside-init
availability.CACHE_AVAILABILITY = False
# reinitialize blockdev without the plugins
# TODO: uncomment (workaround (1/2) for blivet.reset fail)
# self.unload_all_plugins()
disk1 = DiskFile(self.disk1_file)
self.bvt.exclusive_disks = [disk1.name]
if os.geteuid() == 0:
try:
self.bvt.reset()
except blockdev.BlockDevNotImplementedError: # pylint: disable=catching-non-exception
self.fail("Improper handling of missing libblockdev plugin")
# TODO: remove line (workaround (2/2) for blivet.reset fail)
self.unload_all_plugins()
self.bvt.devicetree._add_device(disk1)
self.bvt.initialize_disk(disk1)
pv = self.bvt.new_partition(size=Size("8GiB"), fmt_type="lvmpv")
pv_fail = self.bvt.new_partition(size=Size("8GiB"), fmt_type="lvmpv")
btrfs = self.bvt.new_partition(size=Size("1GiB"), fmt_type="btrfs")
raid1 = self.bvt.new_partition(size=Size("1GiB"), fmt_type="mdmember")
raid2 = self.bvt.new_partition(size=Size("1GiB"), fmt_type="mdmember")
with six.assertRaisesRegex(
self, ValueError,
"resource to create this format.*unavailable"):
self.bvt.create_device(pv_fail)
# to be able to test functions like destroy_device it is necessary to have some
# testing devices actually created - hence loading libblockdev plugins...
self.load_all_plugins()
self.bvt.create_device(pv)
self.bvt.create_device(btrfs)
# ... and unloading again when tests can continue
self.unload_all_plugins()
try:
vg = self.bvt.new_vg(parents=[pv])
except blockdev.BlockDevNotImplementedError: # pylint: disable=catching-non-exception
self.fail("Improper handling of missing libblockdev plugin")
self.load_all_plugins()
self.bvt.create_device(vg)
self.unload_all_plugins()
try:
lv1 = self.bvt.new_lv(fmt_type="ext4",
size=Size("1GiB"),
parents=[vg])
lv2 = self.bvt.new_lv(fmt_type="ext4",
size=Size("1GiB"),
parents=[vg])
lv3 = self.bvt.new_lv(fmt_type="luks",
size=Size("1GiB"),
parents=[vg])
except blockdev.BlockDevNotImplementedError: # pylint: disable=catching-non-exception
self.fail("Improper handling of missing libblockdev plugin")
self.load_all_plugins()
self.bvt.create_device(lv1)
self.bvt.create_device(lv2)
self.bvt.create_device(lv3)
self.unload_all_plugins()
try:
pool = self.bvt.new_lv_from_lvs(vg,
name='pool',
seg_type="thin-pool",
from_lvs=[lv1, lv2])
except blockdev.BlockDevNotImplementedError: # pylint: disable=catching-non-exception
self.fail("Improper handling of missing libblockdev plugin")
self.load_all_plugins()
self.bvt.create_device(pool)
self.unload_all_plugins()
with six.assertRaisesRegex(self, DependencyError,
"requires unavailable_dependencies"):
self.bvt.destroy_device(pool)
try:
self.bvt.new_btrfs(parents=[btrfs])
except blockdev.BlockDevNotImplementedError: # pylint: disable=catching-non-exception
self.fail("Improper handling of missing libblockdev plugin")
with six.assertRaisesRegex(self, ValueError,
"device cannot be resized"):
self.bvt.resize_device(lv3, Size("2GiB"))
try:
self.bvt.new_tmp_fs(fmt=disk1.format, size=Size("500MiB"))
except blockdev.BlockDevNotImplementedError: # pylint: disable=catching-non-exception
self.fail("Improper handling of missing libblockdev plugin")
try:
self.bvt.new_mdarray(level='raid0', parents=[raid1, raid2])
except blockdev.BlockDevNotImplementedError: # pylint: disable=catching-non-exception
self.fail("Improper handling of missing libblockdev plugin")
def testAddPartition(self):
with sparsetmpfile("addparttest", Size("50 MiB")) as disk_file:
disk = DiskFile(disk_file)
disk.format = getFormat("disklabel", device=disk.path, exists=False)
free = disk.format.partedDisk.getFreeSpaceRegions()[0]
#
# add a partition with an unaligned size
#
self.assertEqual(len(disk.format.partitions), 0)
part = addPartition(disk.format, free, parted.PARTITION_NORMAL,
Size("10 MiB") - Size(37))
self.assertEqual(len(disk.format.partitions), 1)
# an unaligned size still yields an aligned partition
alignment = disk.format.alignment
geom = part.geometry
sector_size = Size(geom.device.sectorSize)
self.assertEqual(alignment.isAligned(free, geom.start), True)
self.assertEqual(alignment.isAligned(free, geom.end + 1), True)
self.assertEqual(part.geometry.length, int(Size("10 MiB") // sector_size))
disk.format.removePartition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# add a partition with an unaligned start sector
#
start_sector = 5003
end_sector = 15001
part = addPartition(disk.format, free, parted.PARTITION_NORMAL,
None, start_sector, end_sector)
self.assertEqual(len(disk.format.partitions), 1)
# start and end sectors are exactly as specified
self.assertEqual(part.geometry.start, start_sector)
self.assertEqual(part.geometry.end, end_sector)
disk.format.removePartition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# fail: add a logical partition to a primary free region
#
with self.assertRaisesRegex(parted.PartitionException,
"no extended partition"):
part = addPartition(disk.format, free, parted.PARTITION_LOGICAL,
Size("10 MiB"))
## add an extended partition to the disk
placeholder = addPartition(disk.format, free,
parted.PARTITION_NORMAL, Size("10 MiB"))
all_free = disk.format.partedDisk.getFreeSpaceRegions()
addPartition(disk.format, all_free[1],
parted.PARTITION_EXTENDED, Size("30 MiB"),
alignment.alignUp(all_free[1],
placeholder.geometry.end))
disk.format.removePartition(placeholder)
self.assertEqual(len(disk.format.partitions), 1)
all_free = disk.format.partedDisk.getFreeSpaceRegions()
#
# add a logical partition to an extended free regions
#
part = addPartition(disk.format, all_free[1],
parted.PARTITION_LOGICAL,
Size("10 MiB"), all_free[1].start)
self.assertEqual(part.type, parted.PARTITION_LOGICAL)
disk.format.removePartition(part)
self.assertEqual(len(disk.format.partitions), 1)
#
# fail: add a primary partition to an extended free region
#
with self.assertRaisesRegex(parted.PartitionException, "overlap"):
part = addPartition(disk.format, all_free[1],
parted.PARTITION_NORMAL,
Size("10 MiB"), all_free[1].start)
def testAddPartition(self):
with sparsetmpfile("addparttest", Size("50 MiB")) as disk_file:
disk = DiskFile(disk_file)
disk.format = getFormat("disklabel", device=disk.path, exists=False)
free = disk.format.partedDisk.getFreeSpaceRegions()[0]
#
# add a partition with an unaligned size
#
self.assertEqual(len(disk.format.partitions), 0)
part = addPartition(disk.format, free, parted.PARTITION_NORMAL,
Size("10 MiB") - Size(37))
self.assertEqual(len(disk.format.partitions), 1)
# an unaligned size still yields an aligned partition
alignment = disk.format.alignment
geom = part.geometry
sector_size = Size(geom.device.sectorSize)
self.assertEqual(alignment.isAligned(free, geom.start), True)
self.assertEqual(alignment.isAligned(free, geom.end + 1), True)
self.assertEqual(part.geometry.length, int(Size("10 MiB") // sector_size))
disk.format.removePartition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# add a partition with an unaligned start sector
#
start_sector = 5003
end_sector = 15001
part = addPartition(disk.format, free, parted.PARTITION_NORMAL,
None, start_sector, end_sector)
self.assertEqual(len(disk.format.partitions), 1)
# start and end sectors are exactly as specified
self.assertEqual(part.geometry.start, start_sector)
self.assertEqual(part.geometry.end, end_sector)
disk.format.removePartition(part)
self.assertEqual(len(disk.format.partitions), 0)
#
# fail: add a logical partition to a primary free region
#
with self.assertRaisesRegex(parted.PartitionException,
"no extended partition"):
part = addPartition(disk.format, free, parted.PARTITION_LOGICAL,
Size("10 MiB"))
## add an extended partition to the disk
placeholder = addPartition(disk.format, free,
parted.PARTITION_NORMAL, Size("10 MiB"))
all_free = disk.format.partedDisk.getFreeSpaceRegions()
addPartition(disk.format, all_free[1],
parted.PARTITION_EXTENDED, Size("30 MiB"),
alignment.alignUp(all_free[1],
placeholder.geometry.end))
disk.format.removePartition(placeholder)
self.assertEqual(len(disk.format.partitions), 1)
all_free = disk.format.partedDisk.getFreeSpaceRegions()
#
# add a logical partition to an extended free regions
#
part = addPartition(disk.format, all_free[1],
parted.PARTITION_LOGICAL,
Size("10 MiB"), all_free[1].start)
self.assertEqual(part.type, parted.PARTITION_LOGICAL)
disk.format.removePartition(part)
self.assertEqual(len(disk.format.partitions), 1)
#
# fail: add a primary partition to an extended free region
#
with self.assertRaisesRegex(parted.PartitionException, "overlap"):
part = addPartition(disk.format, all_free[1],
parted.PARTITION_NORMAL,
Size("10 MiB"), all_free[1].start)
