def create_in_out_manager(extended_architecture, layers):
"""
@type extended_architecture: dict
@type layers: dict[unicode, pylstm.wrapper.py_layers.BaseLayer]
@rtype: buffer_manager.BufferManager
"""
in_out_manager = BufferManager()
possible_sources = list(extended_architecture.keys())
while possible_sources:
layer = possible_sources[0]
source_set, sink_set = get_forward_closure(layer, extended_architecture)
for s in source_set:
possible_sources.remove(s)
source_list, sink_list, connection_table = set_up_connection_table(
source_set, sink_set, extended_architecture)
perm = permute_rows(connection_table)
source_list = [source_list[i] for i in perm]
connection_table = np.atleast_2d(connection_table[perm])
source_getters = OrderedDict()
for n in source_list:
source_getters[n] = (layers[n].get_output_buffer_size,
layers[n].create_output_view)
sink_getters = OrderedDict()
for n in sink_list:
sink_getters[n] = (layers[n].get_input_buffer_size,
layers[n].create_input_view)
in_out_manager.add(source_getters, sink_getters, connection_table)
return in_out_manager
def setUp(self):
Node = node_factory('<i')
left = Node(True,
[2, 7, 11],
[32, 87, 43, 2])
right = Node(True,
[15, 24, 31],
[45, 67, 89, 0])
with open('foobar', 'wb') as file:
pass
manager = BufferManager()
block = manager.get_file_block('foobar', 0)
with pin(block):
block.write(b'\0' * BufferManager.block_size)
block = manager.get_file_block('foobar', 1)
with pin(block):
block.write(bytes(left))
block = manager.get_file_block('foobar', 2)
with pin(block):
block.write(bytes(right))
self.Node = Node
self.left = left
def create_param_manager(layers):
"""
@type layers: dict[unicode, pylstm.wrapper.py_layers.BaseLayer]
@rtype: buffer_manager.BufferManager
"""
param_manager = BufferManager()
for name, l in layers.items()[1:]:
sources = {name: (l.get_parameter_size, l.create_param_view)}
param_manager.add(sources, {})
return param_manager
def init_my_bm(self):
self.conn, bm_conn = multiprocessing.Pipe()
self.bm = BufferManager(name="bm", conn=bm_conn)
# self.bm = BufferManager(name="bm")
# self.thread = threading.Thread(target=self.listen_to_my_conn)
# self.thread.start()
hub.spawn(self.listen_to_my_conn)
self.bm.start()
def create_param_manager(layers):
"""
@type layers: dict[unicode, pylstm.wrapper.py_layers.BaseLayer]
@rtype: buffer_manager.BufferManager
"""
param_manager = BufferManager()
for name, l in layers.items()[1:]:
sources = {name: (l.get_parameter_size, l.create_param_view)}
param_manager.add(sources, {})
return param_manager
def create_bwd_state_manager(layers):
"""
@type layers: dict[unicode, pylstm.wrapper.py_layers.BaseLayer]
@rtype: buffer_manager.BufferManager
"""
bwd_state_manager = BufferManager()
for name, l in layers.items()[1:]:
sources = {name: (l.get_bwd_state_size, l.create_bwd_state)}
bwd_state_manager.add(sources, {})
return bwd_state_manager
def test_delete_transfer(self):
self.manager.Node.n = 4
self.manager.insert(2, 32)
self.manager.insert(24, 67)
self.manager.insert(7, 87)
self.manager.insert(15, 45)
self.manager.insert(11, 43)
self.manager.delete(24)
self.assertEqual(self.manager.root, 3)
Node = self.manager.Node
root_block = BufferManager().get_file_block(self.manager.index_file_path, self.manager.root)
root_node = Node.frombytes(root_block.read())
self.assertEqual(root_node.keys, [(11,)])
left_block = BufferManager().get_file_block(self.manager.index_file_path, 1)
left_node = Node.frombytes(left_block.read())
self.assertEqual(left_node.keys, _convert_to_tuple_list([2, 7]))
self.assertEqual(left_node.children, [32, 87, 2])
right_block = BufferManager().get_file_block(self.manager.index_file_path, 2)
right_node = Node.frombytes(right_block.read())
self.assertEqual(right_node.keys, _convert_to_tuple_list([11, 15]))
self.assertEqual(right_node.children, [43, 45, 0])
def create_bwd_state_manager(layers):
"""
@type layers: dict[unicode, pylstm.wrapper.py_layers.BaseLayer]
@rtype: buffer_manager.BufferManager
"""
bwd_state_manager = BufferManager()
for name, l in layers.items()[1:]:
sources = {name: (l.get_bwd_state_size,
l.create_bwd_state)}
bwd_state_manager.add(sources, {})
return bwd_state_manager
def test_initial_insert(self):
manager = IndexManager('spam', '<id')
manager.insert([42, 7.6], 518)
self.assertEqual(manager.root, 1)
self.assertEqual(manager.first_deleted_block, 0)
self.assertEqual(manager.total_blocks, 2)
block = BufferManager().get_file_block('spam', 1)
Node = manager.Node
node = Node.frombytes(block.read())
self.assertEqual(node.is_leaf, True)
self.assertEqual(node.keys, [(42, 7.6)])
self.assertEqual(node.children, [518, 0])
def __init__(self):
self.console = None
self.__objTemplatesWatingVertices_l = []
self.__objTemplatesWatingTextrue_l = []
self.__objectTemplates_d = {}
self.bufferManager = BufferManager()
self.texMan = TextureManager()
self.__toHereQueue = Queue()
self.__toProcessQueue = Queue()
self.objectLoader = ObjectLoader(self.__toHereQueue, self.__toProcessQueue)
self.__haveThingsToGetFromProcess_i = 0
class LeafIterator:
def __init__(self, Node, index_file_path, node, key_position):
self.Node = Node
self.index_file_path = index_file_path
self.node = node
self.key_position = key_position
self.manager = BufferManager()
def __iter__(self):
return self
def __next__(self):
value = self.node.children[self.key_position]
if self.key_position < len(self.node.keys):
key = self.node.keys[self.key_position]
self.key_position += 1
return key, value
else: # jump
if value == 0:
raise StopIteration
else:
node_block = self.manager.get_file_block(
self.index_file_path, value)
with pin(node_block):
self.node = self.Node.frombytes(node_block.read())
self.key_position = 1
return self.node.keys[0], self.node.children[0]
def test_multiple_delete(self):
manager = IndexManager('spam', '<id')
manager.insert([42, 7.6], 518)
manager.insert([42, 7.6], 212)
manager.insert([233, 66.6], 7)
deleted_num = manager.delete([42, 7.6])
self.assertEqual(deleted_num, 2)
self.assertEqual(manager.root, 1)
self.assertEqual(manager.first_deleted_block, 0)
self.assertEqual(manager.total_blocks, 2)
block = BufferManager().get_file_block('spam', 1)
Node = manager.Node
node = Node.frombytes(block.read())
self.assertEqual(node.is_leaf, True)
self.assertEqual(node.keys, [(233, 66.6)])
self.assertEqual(node.children, [7, 0])
def test_buffer_manager(self):
manager = BufferManager()
a = manager.get_file_block('foo', 0)
a.pin()
self.assertEqual(a.read(), b'Hello')
b = manager.get_file_block('./foo', 0)
self.assertTrue(a is b) # test cache hit
a.write(b'hello')
# a is not flushed
b = manager.get_file_block('foo', 1)
b.pin()
time.sleep(0.5)
self.assertEqual(b.read(), b' Worl')
with self.assertRaises(RuntimeError):
c = manager.get_file_block('foo',
2) # test buffer run out of space
a.unpin()
b.unpin()
c = manager.get_file_block('foo', 2) # test lru swap
self.assertFalse((os.path.abspath('foo'), 0)
in manager._blocks.keys()) # a should be swapped out
self.assertTrue(
(os.path.abspath('foo'), 1)
in manager._blocks.keys()) # b should remain in the buffer
with open('foo', 'rb') as file:
self.assertEqual(
file.read(),
b'hello World') # test the swapped out block is flushed
def test_delete_fuse(self):
self.manager.Node.n = 4
self.manager.insert(2, 32)
self.manager.insert(24, 67)
self.manager.insert(7, 87)
self.manager.insert(15, 45)
self.manager.insert(11, 43)
self.manager.delete(24)
self.manager.delete(11)
self.assertEqual(self.manager.root, 1)
Node = self.manager.Node
root_block = BufferManager().get_file_block(self.manager.index_file_path, self.manager.root)
root_node = Node.frombytes(root_block.read())
self.assertEqual(root_node.is_leaf, True)
self.assertEqual(root_node.keys, _convert_to_tuple_list([2, 7, 15]))
self.assertEqual(root_node.children, [32, 87, 45, 0])
def test_persistence(self):
manager = IndexManager('spam', '<id')
manager.insert([42, 7.6], 518)
manager.insert([233, 66.6], 7)
manager.delete([42, 7.6])
manager.dump_header()
manager._manager.flush_all()
del manager
manager = IndexManager('spam', '<id')
self.assertEqual(manager.root, 1)
self.assertEqual(manager.first_deleted_block, 0)
self.assertEqual(manager.total_blocks, 2)
block = BufferManager().get_file_block('spam', 1)
Node = manager.Node
node = Node.frombytes(block.read())
self.assertEqual(node.is_leaf, True)
self.assertEqual(node.keys, [(233, 66.6)])
self.assertEqual(node.children, [7, 0])
def __init__(self, index_file_path, fmt):
"""specify the path of the index file and the format of the keys, return a index manager
if the index file exists, read data from the file
otherwise create it and initialize its header info
multiple index manager on the same file MUSTN'T simultaneously exist"""
self.Node = node_factory(fmt)
self.index_file_path = index_file_path
self._manager = BufferManager()
self.meta_struct = Struct(
'<4i'
) # total blocks, offset of the first deleted block, offset of the root node
try:
meta_block = self._manager.get_file_block(self.index_file_path, 0)
with pin(meta_block):
self.total_blocks, self.first_deleted_block, self.root, self.first_leaf = self.meta_struct.unpack(
meta_block.read()[:self.meta_struct.size])
except FileNotFoundError: # create and initialize an index file if not exits
self.total_blocks, self.first_deleted_block, self.root, self.first_leaf = 1, 0, 0, 0
with open(index_file_path, 'wb') as f:
f.write(
self.meta_struct.pack(self.total_blocks,
self.first_deleted_block, self.root,
self.first_leaf).ljust(
BufferManager.block_size, b'\0'))
def create_in_out_manager(extended_architecture, layers):
"""
@type extended_architecture: dict
@type layers: dict[unicode, pylstm.wrapper.py_layers.BaseLayer]
@rtype: buffer_manager.BufferManager
"""
in_out_manager = BufferManager()
possible_sources = list(extended_architecture.keys())
while possible_sources:
layer = possible_sources[0]
source_set, sink_set = get_forward_closure(layer,
extended_architecture)
for s in source_set:
possible_sources.remove(s)
source_list, sink_list, connection_table = set_up_connection_table(
source_set, sink_set, extended_architecture)
perm = permute_rows(connection_table)
source_list = [source_list[i] for i in perm]
connection_table = np.atleast_2d(connection_table[perm])
source_getters = OrderedDict()
for n in source_list:
source_getters[n] = (layers[n].get_output_buffer_size,
layers[n].create_output_view)
sink_getters = OrderedDict()
for n in sink_list:
sink_getters[n] = (layers[n].get_input_buffer_size,
layers[n].create_input_view)
in_out_manager.add(source_getters, sink_getters, connection_table)
return in_out_manager
def drop_table(table_name):
metadata = load_metadata()
buffer_manager = BufferManager()
MinisqlFacade.delete_record_all(table_name)
shutil.rmtree('schema/tables/' + table_name + '/', True)
buffer_manager.detach_from_file('schema/tables/' + table_name + '/' +
table_name + '.table')
for index_name in metadata.tables[table_name].indexes:
buffer_manager.detach_from_file('schema/tables/' + table_name +
'/' + index_name + '.index')
metadata.drop_table(table_name)
metadata.dump()
class IndexManager:
def __init__(self, index_file_path, fmt):
"""specify the path of the index file and the format of the keys, return a index manager
if the index file exists, read data from the file
otherwise create it and initialize its header info
multiple index manager on the same file MUSTN'T simultaneously exist"""
self.Node = node_factory(fmt)
self.index_file_path = index_file_path
self._manager = BufferManager()
self.meta_struct = Struct(
'<4i'
) # total blocks, offset of the first deleted block, offset of the root node
try:
meta_block = self._manager.get_file_block(self.index_file_path, 0)
with pin(meta_block):
self.total_blocks, self.first_deleted_block, self.root, self.first_leaf = self.meta_struct.unpack(
meta_block.read()[:self.meta_struct.size])
except FileNotFoundError: # create and initialize an index file if not exits
self.total_blocks, self.first_deleted_block, self.root, self.first_leaf = 1, 0, 0, 0
with open(index_file_path, 'wb') as f:
f.write(
self.meta_struct.pack(self.total_blocks,
self.first_deleted_block, self.root,
self.first_leaf).ljust(
BufferManager.block_size, b'\0'))
def dump_header(self):
"""write the header info to the index file
MUST be called before the program exits,
otherwise the header info in the file won't be updated"""
meta_block = self._manager.get_file_block(self.index_file_path, 0)
with pin(meta_block):
meta_block.write(
self.meta_struct.pack(self.total_blocks,
self.first_deleted_block, self.root,
self.first_leaf).ljust(
BufferManager.block_size, b'\0'))
def _get_free_block(self):
"""return a free block and update header info, assuming this block will be used"""
if self.first_deleted_block > 0:
block_offset = self.first_deleted_block
block = self._manager.get_file_block(self.index_file_path,
block_offset)
s = Struct('<i')
next_deleted = s.unpack(block.read()[:s.size])[0]
self.first_deleted_block = next_deleted
return block
else:
block_offset = self.total_blocks
block = self._manager.get_file_block(self.index_file_path,
block_offset)
self.total_blocks += 1
return block
def _delete_node(self, node, block):
"""delete node and writes it to block
just a shortcut to mark a block as deleted"""
with pin(block):
node.next_deleted = self.first_deleted_block
block.write(bytes(node))
self.first_deleted_block = block.block_offset
def _find_leaf(self, key):
"""find the first leaf node where key may reside
key may not really reside in this node, in this case, the index file has no such key"""
key = _convert_to_tuple(key)
node_block_offset = self.root
path_to_parents = []
while True: # find the insert position
node_block = self._manager.get_file_block(self.index_file_path,
node_block_offset)
with pin(node_block):
node = self.Node.frombytes(node_block.read())
if node.is_leaf:
return node, node_block, path_to_parents
else: # continue searching
path_to_parents.append(node_block_offset)
child_index = bisect.bisect_right(node.keys, key)
node_block_offset = node.children[child_index]
def _handle_overflow(self, node, block, path_to_parents):
if not path_to_parents: # the root overflowed
new_block = self._get_free_block()
new_node, key, value = node.split(new_block.block_offset)
with pin(block), pin(new_block):
block.write(bytes(node))
new_block.write(bytes(new_node))
new_root_block = self._get_free_block()
with pin(new_root_block):
new_root_node = self.Node(
False, [key], [block.block_offset, new_block.block_offset])
new_root_block.write(bytes(new_root_node))
self.root = new_root_block.block_offset
return
else:
parent_offset = path_to_parents.pop()
new_block = self._get_free_block()
new_node, key, value = node.split(new_block.block_offset)
with pin(block), pin(new_block):
block.write(bytes(node))
new_block.write(bytes(new_node))
parent_block = self._manager.get_file_block(
self.index_file_path, parent_offset)
parent_node = self.Node.frombytes(parent_block.read())
parent_node.insert(key, value)
if len(parent_node.keys) <= self.Node.n:
with pin(parent_block):
parent_block.write(bytes(parent_node))
else:
self._handle_overflow(parent_node, parent_block,
path_to_parents)
def _handle_underflow(self, node, block, path_to_parents):
"""handle underflow after deletion
will try to transfer from the left sibling first
then try to transfer from the right sibling
then try to fuse with the left sibling
then try to fuse with the right sibling"""
if block.block_offset == self.root:
if not node.keys: # root has no key at all; this node is no longer needed
if node.is_leaf:
self.root = 0
self.first_leaf = 0
else:
self.root = node.children[0]
self._delete_node(node, block)
else:
block.write(bytes(node))
return # root underflow is not a problem
parent_offset = path_to_parents.pop()
parent_block = self._manager.get_file_block(self.index_file_path,
parent_offset)
with pin(parent_block):
parent = self.Node.frombytes(parent_block.read())
my_position = bisect.bisect_right(parent.keys, node.keys[0])
if my_position > 0: # try find the left sibling
left_sibling_offset = parent.children[my_position - 1]
left_sibling_block = self._manager.get_file_block(
self.index_file_path, left_sibling_offset)
with pin(left_sibling_block):
left_sibling = self.Node.frombytes(left_sibling_block.read())
if len(left_sibling.keys) > ceil(
node.n / 2): # a transfer is possible
node.transfer_from_left(left_sibling, parent, my_position - 1)
with pin(block), pin(left_sibling_block), pin(parent_block):
block.write(bytes(node))
left_sibling_block.write(bytes(left_sibling))
parent_block.write(bytes(parent))
return
else:
left_sibling = None # no left sibling
if my_position < len(parent.keys) - 1: # try find the right sibling
right_sibling_offset = parent.children[my_position + 1]
right_sibling_block = self._manager.get_file_block(
self.index_file_path, right_sibling_offset)
with pin(right_sibling_block):
right_sibling = self.Node.frombytes(right_sibling_block.read())
if len(right_sibling.keys) > ceil(
node.n / 2): # a transfer is possible
node.transfer_from_right(right_sibling, parent, my_position)
with pin(block), pin(right_sibling_block), pin(parent_block):
block.write(bytes(node))
right_sibling_block.write(bytes(right_sibling))
parent_block.write(bytes(parent))
return
else:
right_sibling = None # no right sibling
if left_sibling is not None: # fuse with left sibling
left_sibling.fuse_with(node, parent, my_position - 1)
with pin(left_sibling_block):
left_sibling_block.write(bytes(left_sibling))
self._delete_node(node, block)
if len(parent.keys) >= ceil(node.n / 2):
return
else:
self._handle_underflow(parent, parent_block, path_to_parents)
else: # fuse with right sibling
node.fuse_with(right_sibling, parent, my_position)
with pin(block):
block.write(bytes(node))
self._delete_node(right_sibling, right_sibling_block)
if len(parent.keys) >= ceil(node.n / 2):
return
else:
self._handle_underflow(parent, parent_block, path_to_parents)
def find(self, key):
"""find the smallest key >= (parameter) key
return an iterator from this position
raise RuntimeError if the index is empty"""
key = _convert_to_tuple(key)
if self.root == 0:
raise RuntimeError('cannot find from empty index')
else:
node, node_block, path_to_parents = self._find_leaf(key)
key_position = bisect.bisect_left(node.keys, key)
return LeafIterator(self.Node, self.index_file_path, node,
key_position)
def insert(self, key, value):
"""insert a key-value pair into the index file
if key already in this index, raise ValueError"""
key = _convert_to_tuple(key)
if self.root == 0:
block = self._get_free_block()
with pin(block):
self.root = block.block_offset
self.first_leaf = self.root
node = self.Node(is_leaf=True, keys=[key], children=[value, 0])
block.write(bytes(node))
else:
node, node_block, path_to_parents = self._find_leaf(key)
key_position = bisect.bisect_left(node.keys, key)
if key_position < len(
node.keys) and node.keys[key_position] == key:
raise ValueError('duplicate key {}'.format(key))
node.insert(key, value)
if len(node.keys) <= node.n:
node_block.write(bytes(node))
return
else: # split
self._handle_overflow(node, node_block, path_to_parents)
def delete(self, key):
"""delete the key-value pair with key equal the parameter
if the index file has no such key, raise ValueError"""
key = _convert_to_tuple(key)
if self.root == 0:
raise ValueError('can\'t delete from empty index')
else:
node, node_block, path_to_parents = self._find_leaf(key)
key_position = bisect.bisect_left(node.keys, key)
if key_position < len(
node.keys) and node.keys[key_position] == key: # key match
del node.keys[key_position]
del node.children[key_position]
if len(node.keys) >= ceil(node.n / 2):
node_block.write(bytes(node))
return
else: # underflow
self._handle_underflow(node, node_block, path_to_parents)
else: # key doesn't match
raise ValueError('index has no such key {}'.format(key))
def iter_leaves(self):
"""return an iterator at the beginning of the leaf node chain"""
if self.first_leaf == 0:
raise RuntimeError('can\'t iter from empty index')
first_leaf_block = self._manager.get_file_block(
self.index_file_path, self.first_leaf)
first_leaf = self.Node.frombytes(first_leaf_block.read())
return LeafIterator(self.Node, self.index_file_path, first_leaf, 0)
class LocalController(app_manager.RyuApp):
OFP_VERSIONS = [ofproto_v1_3.OFP_VERSION]
def __init__(self, *args, **kwargs):
super(LocalController, self).__init__(*args, **kwargs)
# self.topo = extract_topo(fourswitch())
self.topo = {}
self.time = 0
self.datapaths = {}
self.eth_to_port = {}
self.flows_final = False
self.buffer = dict()
self.bm = None
self.conn = None
self.thread = None
# self.bm.setDaemon(True)
self.init_my_bm()
self.packts_buffed = 0
# self.queue = Queue()
# logger.init('buftest' ,logging.INFO)
def init_my_bm(self):
self.conn, bm_conn = multiprocessing.Pipe()
self.bm = BufferManager(name="bm", conn=bm_conn)
# self.bm = BufferManager(name="bm")
# self.thread = threading.Thread(target=self.listen_to_my_conn)
# self.thread.start()
hub.spawn(self.listen_to_my_conn)
self.bm.start()
def listen_to_my_conn(self):
while (True):
# print("but in the list" + str(len(self.pkg_to_save)))
packet_to_me = None
try:
packet_to_me = self.conn.recv()
except Exception as err:
# print("I'm waiting for your bilibili")
time.sleep(0.01)
pass
if (packet_to_me):
packet = pickle.loads(packet_to_me)
# print(packet)
dpid = packet["dpid"]
pkg = packet["pkg"]
in_port = packet["in_port"]
self.send_back(pkg, dpid, in_port)
@set_ev_cls(ofp_event.EventOFPSwitchFeatures, CONFIG_DISPATCHER)
def _switch_features_handler(self, ev):
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
dpid = datapath.id
self.datapaths[dpid] = datapath
print(self.datapaths)
print(ofproto.OFPP_CONTROLLER)
actions = [
parser.OFPActionOutput(port=ofproto.OFPP_CONTROLLER,
max_len=ofproto.OFPCML_NO_BUFFER)
]
# actions = [parser.OFPActionOutput(port=0 ,max_len=ofproto.OFPCML_NO_BUFFER)]
inst = [
parser.OFPInstructionActions(type_=ofproto.OFPIT_APPLY_ACTIONS,
actions=actions)
]
mod = parser.OFPFlowMod(datapath=datapath,
priority=0,
match=parser.OFPMatch(),
instructions=inst)
datapath.send_msg(mod)
# buf_match = parser.OFPMatch(eth_type=ether_types.ETH_TYPE_IP,ipv4_src="192.168.1.1",ipv4_dst="192.168.1.2")
# buf_match = parser.OFPMatch(in_port=1)
# self.send_buf_cmd(self.datapaths[1],buf_match)
# buf_match = parser.OFPMatch(in_port=2)
# self.send_buf_cmd(self.datapaths[1],buf_match)
self.disable_dhcp(datapath)
# self.install(datapath)
@set_ev_cls(ofp_event.EventOFPBarrierReply, MAIN_DISPATCHER)
def _barrier_reply_handler(self, ev):
#nononononono don't
print(ev.msg)
print("---------------------------------------------------------")
datapath = ev.msg.datapath
cmd_pop = self.make_buf_message(consts.BUF_POP,
src="10.0.0.1",
dst="10.0.0.2",
dst_port=None,
dpid=None,
pkg=None,
in_port=None)
try:
self.conn.send(cmd_pop)
except Exception as e:
print("Error in barrier!!!!!!!!!!!")
print(e)
# if(len(self.buffer)>0):
# self.send_back(1,datapath)
# self.install34(self.datapaths[1])
def install(self, datapath):
# time.sleep(2)
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
priority = 2
buffer_id = ofproto.OFP_NO_BUFFER
match = parser.OFPMatch(in_port=1)
actions = [parser.OFPActionOutput(2)]
inst = [
parser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS, actions)
]
mod = parser.OFPFlowMod(datapath=datapath,
priority=priority,
match=match,
instructions=inst)
datapath.send_msg(mod)
# time.sleep(10)
# datapath.send_barrier()
match = parser.OFPMatch(in_port=2)
actions = [parser.OFPActionOutput(1)]
inst = [
parser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS, actions)
]
mod = parser.OFPFlowMod(datapath=datapath,
priority=priority,
match=match,
instructions=inst)
datapath.send_msg(mod)
# datapath.send_barrier()
req = parser.OFPBarrierRequest(datapath, xid=1)
datapath.send_msg(req)
@set_ev_cls(ofp_event.EventOFPPacketIn, MAIN_DISPATCHER)
def _packet_in_handler(self, ev):
pkt_in = ev.msg
datapath = pkt_in.datapath
ofproto = datapath.ofproto
in_port = pkt_in.match["in_port"]
print(in_port)
src, dst, dst_port, dpid, pkg = self.identify_pkg(pkt_in)
self.packts_buffed += 1
if (self.packts_buffed == 100):
self.install(self.datapaths[1])
# print(pkg)
# self.bm.pkg_to_save.append(pkt_in)
cmd_to_bm = self.make_buf_message(consts.BUF_PUSH,
src,
dst,
dst_port=dst_port,
dpid=dpid,
pkg=pkg,
in_port=in_port)
try:
self.conn.send(cmd_to_bm) #for process
except Exception as e:
print("Error!!!!!!!!!!!!!!!!!!!!!!!!!!")
print(e)
# ("go and save")
def make_buf_message(self, msg_type, src, dst, dst_port, dpid, pkg,
in_port):
return pickle.dumps({
"msg_type": msg_type,
"src": src,
"dst": dst,
"dst_port": dst_port,
"dpid": dpid,
"pkg": pkg,
"in_port": in_port
})
def cal_update(self, src, dst, old, new):
n_buf = new[0]
match = parser.OFPMatch(eth_type=ether_types.ETH_TYPE_IP,
ipv4_dst=ipAdd(dst))
actions_buf = [
parser.OFPActionOutput(port=ofproto.OFPP_CONTROLLER,
max_len=ofproto.OFPCML_NO_BUFFER)
]
dp_buf = self.datapaths[n_buf]
self.add_flow(datapath=dp_buf,
priority=233,
match=match,
actions=actions)
match_remove = parser.OFPMatch(eth_type=ether_types.ETH_TYPEk_IP,
ipv4_dst=ipAdd(dst))
for node in old:
dp = self.datapaths[node]
self.remove_flow(datapath=dp, priority=1, match=match)
new_reverse = new[::-1]
for node in new:
dp = self.datapaths[node]
actions = [
parser.OFPActionOutput(port=ofproto.OFPP_CONTROLLER,
max_len=ofproto.OFPCML_NO_BUFFER)
]
self.add_flow(datapath=dp,
priority=1,
match=match,
actions=actions)
#drop packet for udp 68
def disable_dhcp(self, datapath):
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
match_dhcp = parser.OFPMatch(eth_type=ether_types.ETH_TYPE_IP,
ip_proto=in_proto.IPPROTO_UDP,
udp_src=68,
udp_dst=67)
instruction = [
parser.OFPInstructionActions(ofproto.OFPIT_CLEAR_ACTIONS, [])
]
mod = parser.OFPFlowMod(datapath,
priority=1,
match=match_dhcp,
instructions=instruction)
datapath.send_msg(mod)
def remove_flow(self, datapath, priority, match):
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
mod = parser.OFPFlowMod(datapath=datapath,
command=ofproto.OFPFC_DELETE,
out_port=ofproto.OFPP_ANY,
out_group=ofproto.OFPG_ANY,
match=match,
priority=priority)
datapath.send_msg(mod)
def send_back(self, pkg, dpid, in_port):
datapath = self.datapaths[dpid]
parser = datapath.ofproto_parser
ofproto = datapath.ofproto
actions = [parser.OFPActionOutput(port=ofproto.OFPP_TABLE)]
req = parser.OFPPacketOut(datapath,
in_port=in_port,
buffer_id=ofproto.OFP_NO_BUFFER,
actions=actions,
data=pkg)
datapath.send_msg(req)
# print("sent back")
@set_ev_cls(ofp_event.EventOFPSwitchFeatures, CONFIG_DISPATCHER)
def _features_handler(self, ev):
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
dpid = datapath.id
self.datapaths[dpid] = datapath
print("haha" + str(self.datapaths))
actions = [
parser.OFPActionOutput(port=ofproto.OFPP_CONTROLLER,
max_len=ofproto.OFPCML_NO_BUFFER)
]
inst = [
parser.OFPInstructionActions(type_=ofproto.OFPIT_APPLY_ACTIONS,
actions=actions)
]
mod = parser.OFPFlowMod(datapath=datapath,
priority=0,
match=parser.OFPMatch(),
instructions=inst)
datapath.send_msg(mod)
def save_to_buffer(self, flow_id, pkg):
if (pkg.datapath.id):
flow_id = pkg.datapath.id
if (not self.buffer.has_key(flow_id)):
self.buffer[flow_id] = []
print(flow_id)
self.buffer[flow_id].append(pkg)
print(len(self.buffer[flow_id]))
def identify_pkg(self, pkt_in):
(src, dst, dst_port, dpid, pkg) = ("", "", None, None, None)
dpid = pkt_in.datapath.id
pkg = packet.Packet(pkt_in.data)
# pkg = pkt_in.data
ipkg = pkg.get_protocol(ipv4.ipv4)
if (ipkg):
src = ipkg.src
dst = ipkg.dst
upkg = pkg.get_protocol(udp.udp) or pkg.get_protocol(
tcp.tcp) #udp and tcp are not seperated
if (upkg):
dst_port = upkg.dst_port
# print(ipkg)
return src, dst, dst_port, dpid, pkg
def add_flow(self, datapath, priority, match):
pass
def start_update(self):
old = [0, 1, 2]
new = [0, 3, 2]
src = 0
dst = 2
self.cal_update(src, dst, old, new)
def test_singleton(self):
manager_a = BufferManager()
manager_b = BufferManager()
self.assertTrue(manager_a is manager_b)
def test_detach(self):
manager = BufferManager()
manager.get_file_block('foo', 0)
manager.detach_from_file('foo')
self.assertFalse(manager._blocks)
def __init__(self, Node, index_file_path, node, key_position):
self.Node = Node
self.index_file_path = index_file_path
self.node = node
self.key_position = key_position
self.manager = BufferManager()
class ObjectManager:
def __init__(self):
self.console = None
self.__objTemplatesWatingVertices_l = []
self.__objTemplatesWatingTextrue_l = []
self.__objectTemplates_d = {}
self.bufferManager = BufferManager()
self.texMan = TextureManager()
self.__toHereQueue = Queue()
self.__toProcessQueue = Queue()
self.objectLoader = ObjectLoader(self.__toHereQueue, self.__toProcessQueue)
self.__haveThingsToGetFromProcess_i = 0
def update(self) -> None:
self.__fillObjectTemplateWithTexture()
if self.__haveThingsToGetFromProcess_i:
self.__popObjectBlueprintFromProcess()
def terminate(self):
try:
self.objectLoader.terminate()
except AttributeError:
pass
try:
self.texMan.terminate()
except AssertionError:
pass
def runProcesses(self):
self.objectLoader.start()
def requestObject(self, objInitInfo:"ObjectInitInfo") -> Optional[ds.Object]:
self.update()
if objInitInfo.objTemplateName_s in self.__objectTemplates_d.keys():
if self.__objectTemplates_d[objInitInfo.objTemplateName_s] is None:
return None
else:
objTemplate = self.__objectTemplates_d[objInitInfo.objTemplateName_s]
obj = objTemplate.makeObject(
objInitInfo.name_s, objInitInfo.level, objInitInfo.initPos_t, objInitInfo.static_b,
objInitInfo.colliders_l, objInitInfo.colGroupTargets_l
)
self.console.appendLogs("Instancing object: {} ({})".format(objTemplate.templateName_s, objTemplate.refCount_i))
return obj
else:
print("Object never created:", objInitInfo.objTemplateName_s)
raise FileNotFoundError
def dumpObjects(self, objTempNames_l:list) -> None:
for objTempName_s in objTempNames_l:
objTemplate = self.__objectTemplates_d[objTempName_s]
objTemplate.refCount_i -= 1
tempName_s = objTemplate.templateName_s
self.console.appendLogs("Deleted an object instance: '{}' ({})".format(objTemplate.templateName_s, objTemplate.refCount_i))
if objTemplate.refCount_i <= 0:
trashes_l = objTemplate.terminate()
for trash_t in trashes_l:
self.bufferManager.dumpVertexArray(trash_t[0])
self.bufferManager.dumpBuffer(trash_t[1])
self.bufferManager.dumpBuffer(trash_t[2])
self.bufferManager.dumpBuffer(trash_t[3])
self.texMan.dump(trash_t[4])
del self.__objectTemplates_d[objTempName_s], objTemplate
self.console.appendLogs( "Deleted ObjectTemplate: '{}'".format(tempName_s) )
def giveObjectDefineBlueprint(self, objBprint:ObjectDefineBlueprint) -> None:
if objBprint.name_s in self.__objectTemplates_d.keys():
if self.__objectTemplates_d[objBprint.name_s] is not None:
raise FileExistsError(objBprint.name_s)
else:
self.__objectTemplates_d[objBprint.name_s] = None
objTemp = ObjectTemplate(
objBprint.name_s, [self.__makeRendererFromBprint(xx) for xx in objBprint.rendererBlueprints_l],
objBprint.colliders_l, objBprint.boundingBox
)
self.console.appendLogs("Created an object template: '{}'".format(objTemp.templateName_s))
self.__objTemplatesWatingTextrue_l.append(objTemp)
def giveObjectObjStaticBlueprint(self, objBprint:ObjectObjStaticBlueprint) -> None:
if objBprint.objFileName_s in self.__objectTemplates_d.keys():
return
self.__objectTemplates_d[objBprint.objFileName_s] = None
a = self.__findObjMtlDir(objBprint.objFileName_s)
if a is None:
self.console.appendLogs( "Failed to obj file: '{}'".format(objBprint.objFileName_s) )
else:
self.__toProcessQueue.put( (objBprint.objFileName_s, *a) )
self.__haveThingsToGetFromProcess_i += 1
def __fillObjectTemplateWithTexture(self):
for x in range(len(self.__objTemplatesWatingTextrue_l) - 1, -1, -1):
failedCount_i = 0
objTemplate = self.__objTemplatesWatingTextrue_l[x] # ObjectTemplate
for y in range(len(objTemplate.renderers_l) - 1, -1, -1):
aRenderer = objTemplate.renderers_l[y]
if aRenderer.diffuseMap_i is None:
result = self.texMan.request(aRenderer.diffuseMapName_s)
if result is None:
failedCount_i += 1
continue
else:
aRenderer.diffuseMap_i = result
continue
else:
pass
if failedCount_i <= 0:
self.__objectTemplates_d[objTemplate.templateName_s] = objTemplate
del self.__objTemplatesWatingTextrue_l[x]
def __popObjectBlueprintFromProcess(self):
try:
objBprint = self.__toHereQueue.get_nowait()
except Empty:
return None
else:
self.giveObjectDefineBlueprint(objBprint)
def __makeRendererFromBprint(self, renBprint:RendererBlueprint) -> ds.Renderer:
newRenderer = ds.Renderer(renBprint.name_s, renBprint.initPos_t, renBprint.static_b);
vramUsage_i = 0;
######## VAO ########
newRenderer.vao_i = self.bufferManager.requestVertexArray();
gl.glBindVertexArray(newRenderer.vao_i);
######## Vertex buffer ########
size = renBprint.vertexNdarray.size * renBprint.vertexNdarray.itemsize;
newRenderer.vertexSize_i = renBprint.vertexNdarray.size // 3;
vramUsage_i += size;
newRenderer.vertexArrayBuffer_i = self.bufferManager.requestBuffer();
gl.glBindBuffer(gl.GL_ARRAY_BUFFER, newRenderer.vertexArrayBuffer_i);
gl.glBufferData(gl.GL_ARRAY_BUFFER, size, renBprint.vertexNdarray, gl.GL_STATIC_DRAW);
gl.glVertexAttribPointer(0, 3, gl.GL_FLOAT, gl.GL_FALSE, 0, None)
gl.glEnableVertexAttribArray(0);
######## Texture coord buffer ########
size = renBprint.texCoordNdarray.size * renBprint.texCoordNdarray.itemsize;
vramUsage_i += size;
newRenderer.textureArrayBuffer_i = self.bufferManager.requestBuffer();
gl.glBindBuffer(gl.GL_ARRAY_BUFFER, newRenderer.textureArrayBuffer_i); # Bind the buffer.
gl.glBufferData(gl.GL_ARRAY_BUFFER, size, renBprint.texCoordNdarray, gl.GL_STATIC_DRAW); # Allocate memory.
gl.glVertexAttribPointer(1, 2, gl.GL_FLOAT, gl.GL_FALSE, 0, None); # Defines vertex attributes. What are those?
gl.glEnableVertexAttribArray(1);
######## ########
size = renBprint.normalNdarray.size * renBprint.normalNdarray.itemsize;
vramUsage_i += size;
newRenderer.normalArrayBuffe_i = self.bufferManager.requestBuffer();
gl.glBindBuffer(gl.GL_ARRAY_BUFFER, newRenderer.normalArrayBuffe_i); # Bind the buffer.
gl.glBufferData(gl.GL_ARRAY_BUFFER, size, renBprint.normalNdarray, gl.GL_STATIC_DRAW); # Allocate memory.
gl.glVertexAttribPointer(2, 3, gl.GL_FLOAT, gl.GL_FALSE, 0, None); # Defines vertex attributes. What are those?
gl.glEnableVertexAttribArray(2);
######## ########
newRenderer.diffuseMapName_s = renBprint.textureDir_s;
newRenderer.textureVerNum_f = renBprint.textureVerNum_f;
newRenderer.textureHorNum_f = renBprint.textureHorNum_f;
newRenderer.shininess_f = renBprint.shininess_f;
newRenderer.specularStrength_f = renBprint.specularStrength_f;
newRenderer.vramUsage_i = vramUsage_i;
return newRenderer;
@staticmethod
def __findObjMtlDir(objFileName_s:str) -> Optional[ Tuple[str, str] ]:
objFileDir_s = ""
mtlFileDir_s = ""
for folderDir_s, _, files_l in os.walk(const.MODEL_DIR_s):
for file_s in files_l:
if objFileDir_s and mtlFileDir_s:
break
if file_s == objFileName_s + ".obj":
if objFileDir_s:
raise FileExistsError("There are multiple '{}' files.".format(objFileName_s))
else:
objFileDir_s = "{}\\{}".format(folderDir_s, file_s)
continue
elif file_s == objFileName_s + ".mtl":
if mtlFileDir_s:
raise FileExistsError("There are multiple '{}' files.".format(mtlFileDir_s))
else:
mtlFileDir_s = "{}\\{}".format(folderDir_s, file_s)
continue
if objFileDir_s and mtlFileDir_s:
return objFileDir_s, mtlFileDir_s
else:
return None
def quit():
buffer_manager = BufferManager()
buffer_manager.flush_all()
class Record:
# The format of header should be the same for all records files.
header_format = '<ii' # will be confirmed by RecordManager
header_struct = Struct(header_format)
def __init__(self, file_path, fmt):
self.buffer_manager = BufferManager()
self.filename = file_path
# Each record in file has 2 extra info: next's record_off and valid bit
self.record_struct = Struct(fmt + 'ci')
self.first_free_rec, self.rec_tail = self._parse_header()
def insert(self, attributes):
"""Insert the given record"""
record_info = convert_str_to_bytes(attributes) + (
b'1', -1) # valid bit, next free space
self.first_free_rec, self.rec_tail = self._parse_header()
if self.first_free_rec >= 0: # There are space in free list
first_free_blk, local_offset = self._calc(self.first_free_rec)
block = self.buffer_manager.get_file_block(self.filename,
first_free_blk)
with pin(block):
data = block.read()
records = self._parse_block_data(data, first_free_blk)
next_free_rec = records[self.first_free_rec][-1]
records[local_offset] = record_info
new_data = self._generate_new_data(records, first_free_blk)
block.write(new_data)
position = self.first_free_rec
self.first_free_rec = next_free_rec
else: # No space in free list, append the new record to the end of file
self.rec_tail += 1
block_offset, local_offset = self._calc(self.rec_tail)
block = self.buffer_manager.get_file_block(self.filename,
block_offset)
with pin(block):
data = block.read()
records = self._parse_block_data(data, block_offset)
records.append(record_info)
new_data = self._generate_new_data(records, block_offset)
block.write(new_data)
position = self.rec_tail
self._update_header()
return position
def remove(self, record_offset):
"""Remove the record at specified position and update the free list"""
self.first_free_rec, self.rec_tail = self._parse_header()
block_offset, local_offset = self._calc(record_offset)
block = self.buffer_manager.get_file_block(self.filename, block_offset)
with pin(block):
data = block.read()
records = self._parse_block_data(data, block_offset)
try:
records[local_offset][-1]
except IndexError:
raise IndexError('The offset points to an empty space')
if records[local_offset][-2] == b'0':
raise RuntimeError('Cannot remove an empty record')
records[local_offset][
-1] = self.first_free_rec # A positive number, putting this position into free list
records[local_offset][-2] = b'0'
self.first_free_rec = record_offset # update the head of free list
new_data = self._generate_new_data(records, block_offset)
block.write(new_data)
self._update_header()
def modify(self, attributes, record_offset):
"""Modify the record at specified offset"""
block_offset, local_offset = self._calc(record_offset)
block = self.buffer_manager.get_file_block(self.filename, block_offset)
record_info = convert_str_to_bytes(attributes) + (
b'1', -1) # Updated record must be real
with pin(block):
data = block.read()
records = self._parse_block_data(data, block_offset)
if records[local_offset][-2] == b'0':
raise RuntimeError('Cannot update an empty record')
records[local_offset] = record_info
new_data = self._generate_new_data(records, block_offset)
block.write(new_data)
def read(self, record_offset):
""" Return the record at the corresponding position """
block_offset, local_offset = self._calc(record_offset)
block = self.buffer_manager.get_file_block(self.filename, block_offset)
with pin(block):
data = block.read()
records = self._parse_block_data(data, block_offset)
if records[local_offset][-2] == b'0':
raise RuntimeError('Cannot read an empty record')
return convert_bytes_to_str(tuple(records[local_offset][:-2]))
def scanning_select(self, conditions):
# condition should be a dict: { attribute offset : {operator : value } }
total_blk = self._calc(self.rec_tail)[0] + 1
result_set = []
for block_offset in range(total_blk):
block = self.buffer_manager.get_file_block(self.filename,
block_offset)
records = self._parse_block_data(block.read(), block_offset)
result_set += tuple([
convert_bytes_to_str(record[:-2]) for record in records
if self._check_condition(record, conditions) is True
])
return result_set
def scanning_delete(self, conditions):
total_blk = self._calc(self.rec_tail)[0] + 1
record_offset = 0
for block_offset in range(total_blk):
block = self.buffer_manager.get_file_block(self.filename,
block_offset)
records = self._parse_block_data(block.read(), block_offset)
for i, record in enumerate(records):
if self._check_condition(convert_bytes_to_str(record),
conditions):
records[i][-2] = b'0'
records[i][-1] = self.first_free_rec
self.first_free_rec = record_offset
record_offset += 1
block.write(self._generate_new_data(records, block_offset))
self._update_header()
def scanning_update(self, conditions, attributes):
# The file header won't change when updating
total_blk = self._calc(self.rec_tail)[0] + 1
new_record = convert_str_to_bytes(attributes) + (b'1', -1)
for block_offset in range(total_blk):
block = self.buffer_manager.get_file_block(self.filename,
block_offset)
records = self._parse_block_data(block.read(), block_offset)
for i, record in enumerate(records):
if self._check_condition(convert_bytes_to_str(record),
conditions):
records[i] = new_record
block.write(self._generate_new_data(records, block_offset))
def _calc(self, record_offset):
rec_per_blk = BufferManager.block_size // self.record_struct.size
rec_first_blk = (BufferManager.block_size -
self.header_struct.size) // self.record_struct.size
if record_offset < rec_first_blk: # in 1st block
return 0, record_offset
else: # not in 1st block
block_offset = (record_offset - rec_first_blk) // rec_per_blk + 1
local_offset = record_offset - rec_first_blk - (block_offset -
1) * rec_per_blk
return block_offset, local_offset
@staticmethod
def _check_condition(record, conditions):
if record[
-2] == b'0': # check the valid bit, return false when meet empty record
return False
str_record = convert_bytes_to_str(record[:-2])
for position, condition in conditions.items():
value = str_record[position]
for operator_type, value_restriction in condition.items():
if operator_type == '=':
if value != value_restriction:
return False
elif operator_type == '>':
if value <= value_restriction:
return False
elif operator_type == '<':
if value >= value_restriction:
return False
return True
def _generate_new_data(self, records, blk_offset):
if blk_offset == 0:
data = bytearray(self.header_struct.size)
else:
data = bytearray()
for r in records:
data += self.record_struct.pack(*r)
return data
def _parse_block_data(self, data, blk_offset):
upper_bound = len(data)
if (upper_bound -
self.header_struct.size) % self.record_struct.size != 0:
upper_bound -= self.record_struct.size
if blk_offset == 0: # is the first block, need to consider the header
lower_bound = self.header_struct.size
else: # not the first block, all data are records
lower_bound = 0
records = [
list(self.record_struct.unpack_from(data, offset)) for offset in
range(lower_bound, upper_bound, self.record_struct.size)
]
return records
def _parse_header(self):
# Parse the file header, refresh corresponding info
# and return the info with a tuple
block = self.buffer_manager.get_file_block(self.filename,
0) # Get the first block
with pin(block):
data = block.read()
header_info = self.header_struct.unpack_from(data, 0)
return header_info
def _update_header(self):
# Update the file header after modifying the records
block = self.buffer_manager.get_file_block(self.filename, 0)
with pin(block):
data = block.read()
header_info = (self.first_free_rec, self.rec_tail)
data[:self.header_struct.size] = self.header_struct.pack(
*header_info)
block.write(data)
from buffer_manager import BufferManager manager = BufferManager()
def __init__(self, file_path, fmt):
self.buffer_manager = BufferManager()
self.filename = file_path
# Each record in file has 2 extra info: next's record_off and valid bit
self.record_struct = Struct(fmt + 'ci')
self.first_free_rec, self.rec_tail = self._parse_header()
