def getDATA_hspike(folderName):
print "********* Loading hspike data from '" + folderName + "' ***********"
inputfile = InputFile(folderName + "/input.txt")
inputfile.calcBasicParams()
convFactor1 = inputfile.N_sp / inputfile.dT #superpartices/timestep -> particles/sec
convFactor2 = 1.60217657e-19 * inputfile.N_sp / inputfile.dT # superparticles/timestep -> Amps
convFactor3 = (inputfile.dz / inputfile.Omega_pe
)**2 * inputfile.T_ref #dimless potential -> Volts
(ts, emit, sigma,
incident) = np.loadtxt(folderName + "/arcbounds_original.dat",
usecols=(0, 10, 11, 12),
unpack=True)
useIdxs = np.arange(0, len(ts), 5)
ts = ts[useIdxs]
emit = emit[useIdxs]
sigma = sigma[useIdxs]
incident = incident[useIdxs]
t = ts * inputfile.dT * 1e9 #ns
emit *= convFactor1 / 5.0 #particles/sec
sigma *= inputfile.dZ #cm
incident *= convFactor1 / 5.0 #particles/sec
return (t, emit, sigma, incident)
def getData_IV(folderName):
print "********* Loading IV data from '" + folderName + "' ***********"
inputfile = InputFile(folderName + "/input.txt")
inputfile.calcBasicParams()
convFactor1 = inputfile.N_sp/inputfile.dT #superpartices/timestep -> particles/sec
convFactor2 = 1.60217657e-19*inputfile.N_sp/inputfile.dT # superparticles/timestep -> Amps
convFactor3 = (inputfile.dz/inputfile.Omega_pe)**2*inputfile.T_ref #dimless potential -> Volts
#Load circuit data
if inputfile.CircuitName == "FixedVoltage_resistorCapacitor":
(circ_ts, circ_deltaQ, circ_U, circuitCurrent) = \
np.loadtxt(folderName + "/circuit.dat", usecols=(0,1,2,3), unpack=True)
t = circ_ts*inputfile.dT*1e9 #ns
I = circ_deltaQ*convFactor2 #Amps
U = circ_U*convFactor3 #Volts
I_circ = circuitCurrent*convFactor2 #Amps
print "done."
return (t,I,U,I_circ)
else:
(circ_ts, circ_deltaQ, circ_U) = np.loadtxt(folderName + "/circuit.dat", usecols=(0,1,2), unpack=True)
circuitCurrent=np.zeros_like(circ_ts)
t = circ_ts*inputfile.dT*1e9 #ns
I = circ_deltaQ*convFactor2 #Amps
U = circ_U*convFactor3 #Volts
print "done."
return (t,I,U)
def getDATA_nParticles(folderName):
print "********* Loading nParticles data from '" + folderName + "' ***********"
inputfile = InputFile(folderName + "/input.txt")
inputfile.calcBasicParams()
(t, e,i,n) = np.loadtxt(folderName + "/mainStats.dat", usecols=(1,3,4,5), unpack=True)
e*=inputfile.N_sp
i*=inputfile.N_sp
n*=inputfile.N_sp
return (t,e,i,n)
def getDATA_nParticles(folderName):
print "********* Loading nParticles data from '" + folderName + "' ***********"
inputfile = InputFile(folderName + "/input.txt")
inputfile.calcBasicParams()
(t, e, i, n) = np.loadtxt(folderName + "/mainStats.dat",
usecols=(1, 3, 4, 5),
unpack=True)
e *= inputfile.N_sp
i *= inputfile.N_sp
n *= inputfile.N_sp
return (t, e, i, n)
def getDATA_hspike(folderName):
print "********* Loading hspike data from '" + folderName + "' ***********"
inputfile = InputFile(folderName + "/input.txt")
inputfile.calcBasicParams()
convFactor1 = inputfile.N_sp/inputfile.dT #superpartices/timestep -> particles/sec
convFactor2 = 1.60217657e-19*inputfile.N_sp/inputfile.dT # superparticles/timestep -> Amps
convFactor3 = (inputfile.dz/inputfile.Omega_pe)**2*inputfile.T_ref #dimless potential -> Volts
(ts, emit, sigma, incident) = np.loadtxt(folderName + "/arcbounds_original.dat", usecols=(0,10,11,12), unpack=True)
useIdxs = np.arange(0,len(ts),5)
ts = ts[useIdxs]
emit = emit[useIdxs]
sigma = sigma[useIdxs]
incident = incident[useIdxs]
t = ts*inputfile.dT*1e9 #ns
emit *= convFactor1/5.0 #particles/sec
sigma *= inputfile.dZ #cm
incident *= convFactor1/5.0 #particles/sec
return (t,emit,sigma,incident)
def getData_IV(folderName):
print "********* Loading IV data from '" + folderName + "' ***********"
inputfile = InputFile(folderName + "/input.txt")
inputfile.calcBasicParams()
convFactor1 = inputfile.N_sp / inputfile.dT #superpartices/timestep -> particles/sec
convFactor2 = 1.60217657e-19 * inputfile.N_sp / inputfile.dT # superparticles/timestep -> Amps
convFactor3 = (inputfile.dz / inputfile.Omega_pe
)**2 * inputfile.T_ref #dimless potential -> Volts
#Load circuit data
if inputfile.CircuitName == "FixedVoltage_resistorCapacitor":
(circ_ts, circ_deltaQ, circ_U, circuitCurrent) = \
np.loadtxt(folderName + "/circuit.dat", usecols=(0,1,2,3), unpack=True)
t = circ_ts * inputfile.dT * 1e9 #ns
I = circ_deltaQ * convFactor2 #Amps
U = circ_U * convFactor3 #Volts
I_circ = circuitCurrent * convFactor2 #Amps
print "done."
return (t, I, U, I_circ)
else:
(circ_ts, circ_deltaQ,
circ_U) = np.loadtxt(folderName + "/circuit.dat",
usecols=(0, 1, 2),
unpack=True)
circuitCurrent = np.zeros_like(circ_ts)
t = circ_ts * inputfile.dT * 1e9 #ns
I = circ_deltaQ * convFactor2 #Amps
U = circ_U * convFactor3 #Volts
print "done."
return (t, I, U)
if not (species == "e" or species == "Cu" or species == "Cup"):
print "species must be one of 'e', 'Cu', 'Cup'"
exit(1)
speed = float(sys.argv[9])
tempunit = sys.argv[10]
if not (tempunit == "K" or tempunit == "eV"):
print "tempunit must be one of 'K' or 'eV'"
exit(1)
#Get the scaling setup
MODLOAD_parentdir = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
sys.path.insert(0,MODLOAD_parentdir)
from calcScaling import InputFile
inputfile = InputFile("../input.txt")
inputfile.calcBasicParams()
nr = inputfile.nr #system size [grids]
nz = inputfile.nz #system size [grids]
N_sp = inputfile.N_sp #Particle/superparticle ratio
dZ = inputfile.dZ #um/grid
dz = inputfile.dz #Ldb/grid (typically 0.5)
Ldb = inputfile.Ldb #Debye length [cm]
O_pe = inputfile.O_pe #Plasma angular frequency [s^-1]
if max_r > inputfile.R*1e4:
print
print "************************************************************************************************"
print "Got options:"
print " - mintime = ", mintime
print " - maxtime = ", maxtime
print
print " - species = ", species
print " - edge = ", edg
print
print " - nbinsX = ", nbinsX
print " - nbinsY = ", nbinsY
print
#Get the scaling setup
MODLOAD_parentdir = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
sys.path.insert(0, MODLOAD_parentdir)
from calcScaling import InputFile
inputfile = InputFile("../input.txt")
inputfile.calcBasicParams()
print
print "Time window =", mintime * inputfile.dT * 1e9, "--", maxtime * inputfile.dT * 1e9, "ns"
print
# if minR == maxR and minR == None:
# minR = 0.0
# maxR = inputfile.nr
step = []
z = []
r = []
vz = []
vr = []
vt = []