def __init__(self, myscreen):
self.myscreen = myscreen
self.generators = []
self.verts=[]
self.far=[]
self.edges =[]
self.generatorColor = camvtk.green
self.vertexColor = camvtk.red
self.edgeColor = camvtk.cyan
self.vdtext = camvtk.Text()
self.vdtext.SetPos( (50, myscreen.height-50) )
self.Ngen = 0
self.vdtext_text = ""
self.setVDText()
myscreen.addActor(self.vdtext)
def __init__(self, myscreen, vd):
self.myscreen = myscreen
self.gen_pts=[ocl.Point(0,0,0)]
self.generators = camvtk.PointCloud(pointlist=self.gen_pts)
self.verts=[]
self.far=[]
self.edges =[]
self.generatorColor = camvtk.green
self.vertexColor = camvtk.red
self.edgeColor = camvtk.cyan
self.vdtext = camvtk.Text()
self.vdtext.SetPos( (50, myscreen.height-50) )
self.Ngen = 0
self.vdtext_text = ""
self.setVDText(vd)
myscreen.addActor(self.vdtext)
def main(filename="frame/f.png",yc=6, n=0):
print(ocl.revision())
f=ocl.Ocode()
f.set_depth(7) # depth and scale set here.
f.set_scale(1)
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(50, 22, 40)
myscreen.camera.SetFocalPoint(0,0, 0)
myscreen.camera.Azimuth( n*0.5 )
# box around octree
oct_cube = camvtk.Cube(center=(0,0,0), length=4*f.get_scale(), color=camvtk.white)
oct_cube.SetWireframe()
myscreen.addActor(oct_cube)
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput( w2if.GetOutput() )
# X Y Z arrows
arrowcenter=(1,2,0)
xar = camvtk.Arrow(color=camvtk.red, center=arrowcenter, rotXYZ=(0,0,0))
myscreen.addActor(xar)
yar = camvtk.Arrow(color=camvtk.green, center=arrowcenter, rotXYZ=(0,0,90))
myscreen.addActor(yar)
zar = camvtk.Arrow(color=camvtk.blue, center=arrowcenter, rotXYZ=(0,-90,0))
myscreen.addActor(zar)
t = ocl.LinOCT()
t2 = ocl.LinOCT()
t.init(5)
t2.init(4)
print(" after init() t :", t.str())
print(" after init() t2 :", t2.str())
c = ocl.CylCutter(1) # cutter
c.length = 3
print("cutter length=", c.length)
p1 = ocl.Point(-0.2,-0.2,0.2) # start of move
p2 = ocl.Point(1.5,1.5,-1) # end of move
# volume of g1 move
g1vol = ocl.CylMoveOCTVolume(c, p1, p2)
# sphere
svol = ocl.SphereOCTVolume()
svol.radius=1
svol.center = ocl.Point(0,0,1)
svol.calcBB()
# cube
cube1 = ocl.CubeOCTVolume()
cube1.side=2.123
cube1.center = ocl.Point(0,0,0)
cube1.calcBB()
#cylinder volume at start of move
cylvol = ocl.CylinderOCTVolume()
cylvol.p1 = ocl.Point(p1)
cylvol.p2 = ocl.Point(p1)+ocl.Point(0,0,c.length)
cylvol.radius= c.radius
cylvol.calcBB()
# draw exact cylinder
cp = 0.5*(cylvol.p1 + cylvol.p2)
height = (cylvol.p2-cylvol.p1).norm()
cylvolactor = camvtk.Cylinder(center=(cp.x, cp.y, cp.z-float(height)/2), radius = cylvol.radius, height=height, rotXYZ=(90,0,0))
cylvolactor.SetWireframe()
myscreen.addActor(cylvolactor)
# cylinder at start of move
#drawCylCutter(myscreen, c, p1)
# cylinder at end of move
drawCylCutter(myscreen, c, p2)
# green ball at start of move
startp = camvtk.Sphere(center=(p1.x,p1.y,p1.z), radius=0.1, color=camvtk.green)
myscreen.addActor(startp)
# red ball at end of move
endp = camvtk.Sphere(center=(p2.x,p2.y,p2.z), radius=0.1, color=camvtk.red)
myscreen.addActor(endp)
# build g1 tree
t_before = time.time()
t.build( g1vol )
t_after = time.time()
print("g1 build took ", t_after-t_before," s")
# build cube
t_before = time.time()
t2.build( cube1 )
t_after = time.time()
print("cube build took ", t_after-t_before," s")
#t.sort()
#t2.sort()
print("calling diff()...",)
t_before = time.time()
#dt = t2.operation(1,t)
t2.diff(t)
t_after = time.time()
print("done.")
print("diff took ", t_after-t_before," s")
print("diff has ", t2.size()," nodes")
# original trees
print("drawing trees")
drawTree2(myscreen,t,opacity=1, color=camvtk.green)
drawTree2(myscreen,t2,opacity=0.2, color=camvtk.cyan)
drawTree2(myscreen,t2,opacity=1, color=camvtk.cyan, offset=(5,0,0))
# elliptical tube
pmax = p1 + 1.5* (p2-p1)
pmin = p1 - 0.5* (p2-p1)
myscreen.addActor( camvtk.Sphere(center=(pmax.x,pmax.y,pmax.z), radius=0.1, color=camvtk.lgreen) )
myscreen.addActor( camvtk.Sphere(center=(pmin.x,pmin.y,pmin.z), radius=0.1, color=camvtk.pink) )
aaxis = pmin + ocl.Point(-0.353553, 0.353553, 0)
baxis = pmin + ocl.Point(0.0243494, 0.0243494, 0.126617)
myscreen.addActor( camvtk.Sphere(center=(aaxis.x,aaxis.y,aaxis.z), radius=0.1, color=camvtk.orange) )
myscreen.addActor( camvtk.Sphere(center=(baxis.x,baxis.y,baxis.z), radius=0.1, color=camvtk.yellow) )
title = camvtk.Text()
title.SetPos( (myscreen.width-350, myscreen.height-30) )
title.SetText("OpenCAMLib " + datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.addActor(title)
print(" render()...",)
myscreen.render()
print("done.")
lwr.SetFileName(filename)
time.sleep(0.2)
#lwr.Write()
myscreen.iren.Start()
print(" made ", pf2.dcCalls, " drop-cutter calls")
#clpoints = pftp.getCLPoints()
#ccpoints = pftp.getCCPoints()
clpoints = pf2.getCLPoints()
ccpoints = pf2.getCCPoints()
#CLPointGrid(minx,dx,maxx,miny,dy,maxy,z)
nv = 0
nn = 0
ne = 0
nf = 0
myscreen.camera.SetPosition(3, 100, 15)
myscreen.camera.SetFocalPoint(50, 50, 0)
t = camvtk.Text()
t.SetPos((myscreen.width - 200, myscreen.height - 30))
myscreen.addActor(t)
t2 = camvtk.Text()
t2.SetPos((myscreen.width - 200, 30))
myscreen.addActor(t2)
t3 = camvtk.Text()
t3.SetPos((30, 30))
myscreen.addActor(t3)
t4 = camvtk.Text()
t4.SetPos((30, myscreen.height - 60))
myscreen.addActor(t4)
def main(ycoord=1.2, filename="test", theta=60, fi=45):
myscreen = camvtk.VTKScreen()
focal = cam.Point(2.17, 1, 0)
r = 14
theta = (float(theta) / 360) * 2 * math.pi
campos = cam.Point(r * math.sin(theta) * math.cos(fi),
r * math.sin(theta) * math.sin(fi), r * math.cos(theta))
myscreen.camera.SetPosition(campos.x, campos.y, campos.z)
myscreen.camera.SetFocalPoint(focal.x, focal.y, focal.z)
#ycoord = 1.1
# the two points that define the edge
a = cam.Point(3, ycoord, 2.999999)
b = cam.Point(-1, ycoord, 3)
myscreen.addActor(camvtk.Point(center=(a.x, a.y, a.z), color=(1, 0, 1)))
myscreen.addActor(camvtk.Point(center=(b.x, b.y, b.z), color=(1, 0, 1)))
#c=cam.Point(0,0,0.3)
myscreen.addActor(camvtk.Line(p1=(a.x, a.y, a.z), p2=(b.x, b.y, b.z)))
#t = cam.Triangle(a,b,c)
cutter_length = 2
cutter = cam.BullCutter(1, 0.2, cutter_length)
print cutter
xar = camvtk.Arrow(color=camvtk.red, rotXYZ=(0, 0, 0))
myscreen.addActor(xar)
yar = camvtk.Arrow(color=camvtk.green, rotXYZ=(0, 0, 90))
myscreen.addActor(yar)
zar = camvtk.Arrow(color=camvtk.blue, rotXYZ=(0, -90, 0))
myscreen.addActor(zar)
cl = cam.Point(2.1748, 1, 0)
radius1 = 1
radius2 = 0.25
#tor.SetWireframe()
#myscreen.addActor(tor)
cyl = camvtk.Cylinder(center=(cl.x, cl.y, cl.z),
radius=radius1,
height=2,
color=(0, 1, 1),
rotXYZ=(90, 0, 0),
resolution=50)
#myscreen.addActor(cyl)
cl_line = camvtk.Line(p1=(cl.x, cl.y, -100),
p2=(cl.x, cl.y, +100),
color=camvtk.red)
myscreen.addActor(cl_line)
cl_tube = camvtk.Tube(p1=(cl.x, cl.y, -100),
p2=(cl.x, cl.y, +100),
radius=radius1,
color=camvtk.green)
cl_tube.SetOpacity(0.1)
myscreen.addActor(cl_tube)
a_inf = a + (-100 * (b - a))
b_inf = a + (+100 * (b - a))
tube = camvtk.Tube(p1=(a_inf.x, a_inf.y, a_inf.z),
p2=(b_inf.x, b_inf.y, b_inf.z),
radius=0.05 * radius2,
color=camvtk.red)
tube.SetOpacity(0.3)
myscreen.addActor(tube)
# cylindrical-cutter circle at z=0 plane
#cir= camvtk.Circle(radius=radius1, center=(cl.x,cl.y,cl.z), color=camvtk.yellow)
#myscreen.addActor(cir)
#clp = camvtk.Point(center=(cl.x,cl.y,cl.z))
#myscreen.addActor(clp)
# short axis of ellipse = radius2
# long axis of ellipse = radius2/sin(theta)
# where theta is the slope of the line
dx = b.x - a.x
dz = b.z - a.z
#print "dx=", dx
#print "dz=", dz
theta = math.atan(dz /
dx) ## dx==0 is special case!! (i.e. vertical lines)
print "theta=", theta
a_axis = abs(radius2 / math.sin(theta))
print "a=", a_axis
# ellipse
#a=2
b_axis = radius2
print "b= ", b_axis
# slice the tube with a plane at z=0 and find the ellipse center
# line is from Point a to b:
# a + t*(b-a)
# find t so that z-component is zero:
# a.z + t( b.z -a.z) = 0
# t= a.z / (b.z - a.z)
# so point
tparam = -a.z / (b.z - a.z) # NOTE horizontal lines are a special case!!
ellcenter = a + tparam * (b - a)
print "ellcenter (z=0?) =", ellcenter
# center of the
# ecen_tmp=cam.Point(ellcenter,a.y,0)
#drawellipse(myscreen, ellcenter, a_axis, b_axis)
oe = cam.Ellipse(ellcenter, a_axis, b_axis, radius1)
#oe2 = cam.Ellipse(ellcenter, a_axis, b_axis, 0.05) # to locate text on the outside of the ellipse
nmax = 20
#delta=0.05
#td = 1
t = camvtk.Text()
t.SetPos((myscreen.width - 450, myscreen.height - 30))
t.SetText("OpenCAMLib " +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.addActor(t)
t2 = camvtk.Text()
ytext = "Y: %3.3f" % (ycoord)
t2.SetText(ytext)
t2.SetPos((50, myscreen.height - 150))
myscreen.addActor(t2)
#w2if = vtk.vtkWindowToImageFilter()
#w2if.SetInput(myscreen.renWin)
#lwr = vtk.vtkPNGWriter()
#lwr.SetInput( w2if.GetOutput() )
epos = cam.Epos()
epos.setS(0, 1)
#p5 = oe.ePoint(epos5)
#pt = oe2.oePoint(epos5)
#print "before= ", epos5.s, " , ", epos5.t
# RUN THE SOLVER!
nsteps = cam.Ellipse.solver(oe, cl)
print "solver done. back to python:"
print "1st (s,t) solution=", oe.epos1
print "2st (s,t) solution=", oe.epos2
elc1 = calcEcenter(oe, a, b, cl, 1)
elc2 = calcEcenter(oe, a, b, cl, 2)
print "elc1=", elc1
print "elc2=", elc2
#exit()
#elc2 = elc2
#epos = oe.epos2
fe1 = cam.Ellipse(elc1, a_axis, b_axis, radius1)
fe2 = cam.Ellipse(elc2, a_axis, b_axis, radius1)
# draw ellipse-centers
myscreen.addActor(
camvtk.Sphere(center=(elc1.x, elc1.y, elc1.z),
radius=0.01,
color=camvtk.lgreen))
myscreen.addActor(
camvtk.Sphere(center=(elc2.x, elc2.y, elc2.z),
radius=0.01,
color=camvtk.pink))
# cc-points on the ellipse
ccp1 = fe1.ePoint(oe.epos1)
ccp2 = fe2.ePoint(oe.epos2)
myscreen.addActor(
camvtk.Sphere(center=(ccp1.x, ccp1.y, ccp1.z),
radius=0.01,
color=camvtk.lgreen))
myscreen.addActor(
camvtk.Sphere(center=(ccp2.x, ccp2.y, ccp2.z),
radius=0.01,
color=camvtk.pink))
cl1 = fe1.oePoint(oe.epos1)
cl2 = fe2.oePoint(oe.epos2)
# circles
myscreen.addActor(
camvtk.Circle(radius=radius1,
center=(cl1.x, cl1.y, cl1.z),
color=camvtk.green))
myscreen.addActor(
camvtk.Circle(radius=radius1,
center=(cl2.x, cl2.y, cl2.z),
color=camvtk.pink))
# torus
tor = camvtk.Toroid(r1=radius1,
r2=radius2,
center=(cl1.x, cl1.y, cl1.z),
rotXYZ=(0, 0, 0),
color=camvtk.green)
tor.SetOpacity(0.4)
myscreen.addActor(tor)
tor = camvtk.Toroid(r1=radius1,
r2=radius2,
center=(cl2.x, cl2.y, cl2.z),
rotXYZ=(0, 0, 0),
color=camvtk.pink)
tor.SetOpacity(0.4)
myscreen.addActor(tor)
# line: ellipse-center to cc-point
myscreen.addActor(
camvtk.Line(p1=(elc1.x, elc1.y, elc1.z),
p2=(ccp1.x, ccp1.y, ccp1.z),
color=camvtk.cyan))
myscreen.addActor(
camvtk.Line(p1=(elc2.x, elc2.y, elc2.z),
p2=(ccp2.x, ccp2.y, ccp2.z),
color=camvtk.cyan))
# line: cc-point to cl-point
myscreen.addActor(
camvtk.Line(p1=(cl1.x, cl1.y, cl1.z),
p2=(ccp1.x, ccp1.y, ccp1.z),
color=camvtk.yellow))
myscreen.addActor(
camvtk.Line(p1=(cl2.x, cl2.y, cl2.z),
p2=(ccp2.x, ccp2.y, ccp2.z),
color=camvtk.yellow))
# true cl
#clt = cc1.
#fclpoint = camvtk.Sphere(center=(fclp.x,fclp.y,fclp.z), radius=0.01, color=camvtk.blue)
#myscreen.addActor(fclpoint)
# line from ellipse center to fcc
# the offset normal
#myscreen.addActor(camvtk.Line( p1=(fclp.x,fclp.y,fclp.z),p2=(fccp.x,fccp.y,fccp.z), color=camvtk.yellow ))
drawellipse(myscreen, elc1, a_axis, b_axis)
drawellipse(myscreen, elc2, a_axis, b_axis)
#convtext = "%i" % (nsteps)
#print (pt.x, pt.y, pt.z)
#center=(pt.x, pt.y, pt.z)
#tst = camvtk.Text3D( color=(1,1,1), center=(pt.x, pt.y, 0) ,
#text=convtext, scale=0.02)
#tst.SetCamera(myscreen.camera)
#myscreen.addActor(tst)
#colmax=11
#colmin=4
#nsteps = nsteps - colmin
#colmax = colmax - colmin
#convcolor=( float(nsteps*nsteps)/(colmax), float((colmax-nsteps))/colmax, 0 )
#esphere = camvtk.Sphere(center=(p5.x,p5.y,0), radius=0.01, color=convcolor)
#cce = oe.ePoint(epos)
#cle = oe.oePoint(epos)
#end_sphere = camvtk.Sphere(center=(cce.x,cce.y,0), radius=0.01, color=camvtk.green)
#cl_sphere = camvtk.Sphere(center=(cle.x,cle.y,0), radius=0.01, color=camvtk.pink)
#cl_sphere.SetOpacity(0.4)
#clcir= camvtk.Circle(radius=radius1, center=(cle.x,cle.y,cle.z), color=camvtk.pink)
#myscreen.addActor(clcir)
#myscreen.addActor(esphere)
#myscreen.addActor(end_sphere)
#myscreen.addActor(cl_sphere)
#myscreen.render()
print "done."
myscreen.render()
lwr.SetFileName(filename)
#raw_input("Press Enter to terminate")
time.sleep(0.5)
#lwr.Write()
myscreen.iren.Start()
def main(filename="frame/f.png",yc=6, n=0):
f=ocl.Ocode()
f.set_depth(9)
f.set_scale(5)
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(50, 22, 40)
myscreen.camera.SetFocalPoint(0,0, 0)
myscreen.camera.Azimuth( n*0.5 )
# box around octree
oct_cube = camvtk.Cube(center=(0,0,0), length=4*f.get_scale(), color=camvtk.white)
oct_cube.SetWireframe()
myscreen.addActor(oct_cube)
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput( w2if.GetOutput() )
arrowcenter=(1,2,0)
xar = camvtk.Arrow(color=camvtk.red, center=arrowcenter, rotXYZ=(0,0,0))
myscreen.addActor(xar)
yar = camvtk.Arrow(color=camvtk.green, center=arrowcenter, rotXYZ=(0,0,90))
myscreen.addActor(yar)
zar = camvtk.Arrow(color=camvtk.blue, center=arrowcenter, rotXYZ=(0,-90,0))
myscreen.addActor(zar)
"""
dl = myscreen.GetLights()
print("original default light:")
print(dl)
print("nextitem()")
l1 = dl.GetNextItem()
print(" light:")
print(l1)
#print myscreen.GetLights()
lights = vtk.vtkLightCollection()
l = myscreen.MakeLight()
l2 = myscreen.MakeLight()
#myscreen.RemoveAllLights()
l.SetAmbientColor(0.5, 0.5, 0.5)
l.SetPosition(0,0,20)
l.SetConeAngle(360)
l2.SetPosition(0,0,-20)
l2.SetConeAngle(360)
l2.SetIntensity(0.5)
myscreen.AddLight(l)
myscreen.AddLight(l2)
#myscreen.SetLightCollection(lights)
llist = myscreen.GetLights()
li = llist.GetNextItem()
print(" new list of lights:")
print(li)
#for li in llist:
# print(li)
print(" newly created light:")
print(l)
dl = myscreen.GetLights()
print("NEW light:")
print(dl)
"""
t = ocl.LinOCT()
t2 = ocl.LinOCT()
t.init(0)
t2.init(1)
#drawTree2(myscreen, t, opacity=0.2)
#myscreen.render()
#myscreen.iren.Start()
#exit()
print(" after init() t :", t.str())
print(" after init() t2 :", t2.str())
# sphere
svol = ocl.SphereOCTVolume()
svol.radius=3.2
svol.center = ocl.Point(1,0,3)
svol.calcBB()
# cube
cube1 = ocl.CubeOCTVolume()
cube1.side=2.123
cube1.center = ocl.Point(0,0,0)
cube1.calcBB()
#cylinder
cylvol = ocl.CylinderOCTVolume()
cylvol.p2 = ocl.Point(3,4,-5)
cylvol.radius= 2
cylvol.calcBB()
# draw exact cylinder
cp = 0.5*(cylvol.p1 + cylvol.p2)
height = (cylvol.p2-cylvol.p1).norm()
cylvolactor = camvtk.Cylinder(center=(cp.x, cp.y, cp.z-float(height)/2), radius = cylvol.radius, height=height, rotXYZ=(90,0,0))
cylvolactor.SetWireframe()
#myscreen.addActor(cylvolactor)
c = ocl.CylCutter(2)
c.length = 3
print("cutter length=", c.length)
p1 = ocl.Point(-1,-2,0)
p2 = ocl.Point(1,2.0,0)
g1vol = ocl.CylMoveOCTVolume(c, p1, p2)
cyl1 = camvtk.Cylinder(center=(p1.x,p1.y,p1.z), radius=c.radius,
height=c.length,
rotXYZ=(90,0,0), color=camvtk.grey)
cyl1.SetWireframe()
myscreen.addActor(cyl1)
cyl2 = camvtk.Cylinder(center=(p2.x,p2.y,p2.z), radius=c.radius,
height=c.length,
rotXYZ=(90,0,0), color=camvtk.grey)
cyl2.SetWireframe()
myscreen.addActor(cyl2)
startp = camvtk.Sphere(center=(p1.x,p1.y,p1.z), radius=0.1, color=camvtk.green)
myscreen.addActor(startp)
endp = camvtk.Sphere(center=(p2.x,p2.y,p2.z), radius=0.1, color=camvtk.red)
myscreen.addActor(endp)
t.build( g1vol )
t2.build( cube1)
print("calling diff()...",)
dt = t2.operation(1,t)
print("done.")
# set Cylinde bounding-box
"""
cylvol.bb.maxx = 1.23
cylvol.bb.minx = -0.2
cylvol.bb.maxy = 1.23
cylvol.bb.miny = -0.2
cylvol.bb.maxz = 1.23
cylvol.bb.minz = -0.2
"""
drawBB( myscreen, g1vol)
#print cylvol.bb.maxx
#print "t2 build()"
#t2.build(cube1)
#print " t2 after build() ", t2.size()
#t2.condense()
#print " t2 after condense() ", t2.size()
# original trees
drawTree2(myscreen,t,opacity=1, color=camvtk.green)
drawTree2(myscreen,t2,opacity=1, color=camvtk.cyan)
drawTree2(myscreen,dt,opacity=1, color=camvtk.cyan, offset=(5,0,0))
"""
for n in range(0,30):
tp = ocl.Point(2.5,2.5,2-n*0.3)
tpc = camvtk.black
if (cylvol.isInside(tp)):
tpc = camvtk.red
else:
tpc = camvtk.cyan
tp_sphere = camvtk.Sphere(center=(tp.x,tp.y,tp.z), radius=0.1, color= tpc)
myscreen.addActor(tp_sphere)
"""
#drawTree(myscreen,t2,opacity=1, color=camvtk.red)
#print " diff12()...",
#t3 = t2.operation(1,t)
#print "done."
#print " diff21()...",
#t4 = t2.operation(2,t)
#print "done."
#print " intersection()...",
#t5 = t2.operation(3,t)
#print "done."
#print " sum()...",
#t6 = t2.operation(4,t)
#print "done."
#print " difference 1-2 t3 (blue) =", t3.size()
#print " difference 2-1 t4 (yellow)=", t4.size()
#print " intersection t5 (pink) =", t5.size()
#print " union t6 (grey) =", t6.size()
#drawTree(myscreen,t3,opacity=1, color=camvtk.blue, offset=(0,15,0))
#drawTree(myscreen,t4,opacity=1, color=camvtk.yellow,offset=(0,-15,0))
#drawTree(myscreen,t5,opacity=1, color=camvtk.pink,offset=(-15,0,0))
#drawTree(myscreen,t6,opacity=1, color=camvtk.grey,offset=(-15,-15,0))
title = camvtk.Text()
title.SetPos( (myscreen.width-350, myscreen.height-30) )
title.SetText("OpenCAMLib " + datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.addActor(title)
#st2 = camvtk.Text()
#ytext = "Linear OCTree set operations: difference, intersection, union"
#st2.SetText(ytext)
#st2.SetPos( (50, myscreen.height-30) )
#myscreen.addActor( st2)
#st3 = camvtk.Text()
#text = "Original OCTrees\n Ball:%d nodes\n Cube: %d nodes" % ( t.size(), t2.size() )
#st3.SetText(text)
#st3.SetPos( (50, 200) )
#myscreen.addActor( st3)
#st4 = camvtk.Text()
#un = " Union (grey): %d nodes\n" % (t6.size())
#int = " Intersection (pink): %d nodes\n" % (t5.size())
#diff1 = " difference Cube-Ball (blue): %d nodes\n" % (t3.size())
#diff2 = " difference Ball-Cube (yellow): %d nodes\n" % (t4.size())
#text= un+int+diff1+diff2
#st4.SetText(text)
#st4.SetPos( (50, 100) )
#myscreen.addActor( st4)
print(" render()...",)
myscreen.render()
print("done.")
lwr.SetFileName(filename)
time.sleep(0.2)
#lwr.Write()
myscreen.iren.Start()
def main():
print(ocl.revision())
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(-8, -4, 25)
myscreen.camera.SetFocalPoint(4.5, 6, 0)
# axis arrows
camvtk.drawArrows(myscreen, center=(-1, -1, 0))
camvtk.drawOCLtext(myscreen)
octtext = camvtk.Text()
octtext.SetPos((70, myscreen.height - 600))
myscreen.addActor(octtext)
cltext = camvtk.Text()
cltext.SetPos((70, myscreen.height - 100))
myscreen.addActor(cltext)
stl = camvtk.STLSurf("../../stl/gnu_tux_mod.stl")
#myscreen.addActor(stl)
#stl.SetWireframe()
stl.SetColor((0.5, 0.5, 0.5))
polydata = stl.src.GetOutput()
s = ocl.STLSurf()
camvtk.vtkPolyData2OCLSTL(polydata, s)
print("STL surface read,", s.size(), "triangles")
#angle = math.pi/4
radius = 0.4
length = 5
cutter = ocl.BallCutter(2 * radius, length)
#cutter = ocl.CylCutter(2*radius, length)
# generate CL-points
minx = 0
dx = 0.1 / 0.4
maxx = 9
miny = 0
dy = cutter.getRadius() / 1.5
maxy = 12
z = -1
# this generates a list of CL-points in a grid
clpoints = pyocl.CLPointGrid(minx, dx, maxx, miny, dy, maxy, z)
# batchdropcutter
bdc = ocl.BatchDropCutter()
bdc.bucketSize = 7
bdc.setSTL(s)
bdc.setCutter(cutter)
#bdc.setThreads(1) # explicitly setting one thread is better for debugging
for p in clpoints:
bdc.appendPoint(p)
t_before = time.time()
bdc.run()
t_after = time.time()
calctime = t_after - t_before
print(" BDC4 done in ", calctime, " s")
dropcutter_time = calctime
clpoints = bdc.getCLPoints()
#camvtk.drawCLPointCloud(myscreen, clpoints)
print(" clpts= ", len(clpoints))
myscreen.render()
#myscreen.iren.Start()
#exit()
s = ocl.BallCutterVolume()
#s = ocl.CylCutterVolume()
#s.center = ocl.Point(-2.50,-0.6,0)
s.radius = cutter.getRadius()
s.length = cutter.getLength()
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
cp = ocl.Point(5, 5, -3) # center of octree
#depths = [3, 4, 5, 6, 7, 8]
max_depth = 7
root_scale = 7
t = ocl.Octree(root_scale, max_depth, cp)
t.init(5)
n = 0 # the frame number
stockbox = ocl.PlaneVolume(1, 0, 0.1)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(0, 0, 8.9)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(1, 1, 0.1)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(0, 1, 11.9)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(1, 2, -0.5)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(0, 2, 3)
t.diff_negative(stockbox)
mc = ocl.MarchingCubes()
print("mc()...", )
tris = mc.mc_tree(t) #.mc_triangles()
print(" mc() got ", len(tris), " triangles")
mc_surf = camvtk.STLSurf(triangleList=tris, color=camvtk.red)
mc_surf.SetColor(camvtk.cyan)
print(" STLSurf()...", )
myscreen.addActor(mc_surf)
print("done.")
cl = ocl.Point(0, 0, 5)
cactors = camvtk.drawBallCutter(myscreen, cutter, cl)
myscreen.render()
#myscreen.iren.Start()
#exit()
myscreen.removeActor(mc_surf)
renderinterleave = len(clpoints) / 100
step_time = 0
#render_time = 0
while (n < len(clpoints)):
cl = ocl.Point(clpoints[n].x, clpoints[n].y, clpoints[n].z)
s.setPos(cl) # move the cutter
t_before = time.time()
t.diff_negative(s) # subtract cutter from stock
t_after = time.time()
build_time = t_after - t_before
step_time = step_time + build_time
n = n + 1
if n < (len(clpoints) - renderinterleave):
myscreen.removeActor(mc_surf)
for c in cactors:
myscreen.removeActor(c)
if ((n % renderinterleave) == 0):
cactors = camvtk.drawBallCutter(myscreen, cutter, cl)
t_before = time.time()
print("mc()...", )
tris = mc.mc_tree(t) #.mc_triangles()
mc_time = time.time() - t_before
print("done in ", mc_time, " s")
print(" mc() got ", len(tris), " triangles")
print(" STLSurf()...", )
t_before = time.time()
mc_surf = camvtk.STLSurf(triangleList=tris, color=camvtk.red)
#mc_surf.SetWireframe()
mc_surf.SetColor(camvtk.cyan)
myscreen.addActor(mc_surf)
print("done.")
print(" render()...", )
myscreen.render()
render_time = time.time() - t_before
myscreen.camera.Azimuth(0.1)
lwr.SetFileName("frames/cutsim_d10_frame" + ('%06d' % n) + ".png")
w2if.Modified()
call_ms = step_time / renderinterleave
print(renderinterleave, " diff() calls in", step_time, " = ",
call_ms, " ms/call")
infotext = "Octree max_depth=%i \nCL-point %i of %i \n%i CL-pts/frame\ndiff()-time: %1.3f s/CL-point\nmc()-time: %1.3f s/frame\nrender()-time: %1.3f s/frame\n%i Triangles" % (
max_depth, n, len(clpoints), renderinterleave, call_ms,
mc_time, render_time, len(tris))
octtext.SetText(infotext)
postext = "X: %f\nY: %f\nZ: %f" % (cl.x, cl.y, cl.z)
cltext.SetText(postext)
#lwr.Write() # uncomment to actually write files to disk
print("done.")
step_time = 0
#lwr.SetFileName("frames/mc8_frame"+ ('%06d' % n)+".png")
#myscreen.camera.Azimuth( 2 )
#myscreen.render()
#w2if.Modified()
#lwr.Write()
#mc_surf.SetWireframe()
#print "sleep...",
#time.sleep(1.02)
#print "done."
print(" clpts= ", len(clpoints))
print("All done.")
myscreen.iren.Start()
def main():
myscreen = camvtk.VTKScreen()
focal = cam.Point(50, 0, 0)
r = 300
theta = (float(45)/360)*2*math.pi
fi=45
campos = cam.Point( r*math.sin(theta)*math.cos(fi), r*math.sin(theta)*math.sin(fi), r*math.cos(theta) )
myscreen.camera.SetPosition(campos.x, campos.y, campos.z)
myscreen.camera.SetFocalPoint(focal.x,focal.y, focal.z)
t = camvtk.Text()
t.SetPos( (myscreen.width-450, myscreen.height-30) )
myscreen.addActor( t)
t2 = camvtk.Text()
ytext = "kd-tree debug" #"Y: %3.3f" % (ycoord)
t2.SetText(ytext)
t2.SetPos( (50, myscreen.height-50) )
myscreen.addActor( t2)
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput( w2if.GetOutput() )
epos = cam.Epos()
epos.setS(0,1)
t.SetText("OpenCAMLib 10.04-beta, " + datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
#ycoord = 1.1
stl = camvtk.STLSurf(filename="../stl/carpet2.stl")
#stl = camvtk.STLSurf(filename="demo2.stl")
print "STL surface read"
myscreen.addActor(stl)
stl.SetWireframe()
stl.SetColor((0.5,0.5,0.5))
polydata = stl.src.GetOutput()
s= cam.STLSurf()
camvtk.vtkPolyData2OCLSTL(polydata, s)
print "STLSurf with ", s.size(), " triangles"
cutterDiameter=7
cutter = cam.CylCutter(cutterDiameter)
cl = cam.Point(31, 42, 3)
cutactor = camvtk.Cylinder(center=(cl.x,cl.y,cl.z),
radius=cutterDiameter/2,
height=2,
rotXYZ=(90,0,0),
color=camvtk.green)
myscreen.addActor( cutactor )
# sphere to see (0,0)
myscreen.addActor( camvtk.Sphere( center=(0,0,0), radius=0.2, color = camvtk.yellow ) )
s.build_kdtree()
print "built kd-tree"
s.jump_kd_reset()
cpp_tlist = s.getTrianglesUnderCutter(cl, cutter)
py_tlist = []
depth = 6
kdtreesearch(myscreen, py_tlist, s, cutter, cl, depth)
print "len(cpp_list) after search=", len(cpp_tlist)
print "len(py_list) after search=", len(py_tlist)
cpp = camvtk.STLSurf(triangleList=cpp_tlist)
cpp.SetColor(camvtk.lgreen)
cpp.SetWireframe()
myscreen.addActor(cpp)
py = camvtk.STLSurf(triangleList=py_tlist)
py.SetColor(camvtk.pink)
py.SetWireframe()
myscreen.addActor(py)
#drawcuts(myscreen, s)
myscreen.render()
myscreen.iren.Start()
time.sleep(2)
exit()
tlist = s.get_kd_triangles()
print "got", len(tlist), " triangles"
while (s.jump_kd_hi()):
lotris = s.get_kd_triangles()
s.jump_kd_up()
cut = s.get_kd_cut()
s.jump_kd_lo()
hitris = s.get_kd_triangles()
lev = s.get_kd_level()
print "l=", lev, " hi=", len(hitris), " lo=", len(lotris), " cut=", cut
if ( cut[0] < 2 ):
print "x cut ",
if ( cut[0] == 0):
print "max"
myscreen.addActor( camvtk.Line( p1=(cut[1],100,0), p2=(cut[1],-100,0), color = camvtk.green ) )
else:
print "min"
myscreen.addActor( camvtk.Line( p1=(cut[1],100,0), p2=(cut[1],-100,0), color = camvtk.lgreen ) )
else:
print "y cut ",
if ( cut[0] == 2):
print "max"
myscreen.addActor( camvtk.Line( p1=(100,cut[1],0), p2=(-100,cut[1],0), color = camvtk.red ) )
else:
print "min"
myscreen.addActor( camvtk.Line( p1=(100,cut[1],0), p2=(-100,cut[1],0), color = camvtk.pink ) )
slo = camvtk.STLSurf(triangleList=lotris)
slo.SetColor(camvtk.pink)
slo.SetWireframe()
shi = camvtk.STLSurf(triangleList=hitris)
shi.SetColor(camvtk.lgreen)
shi.SetWireframe()
myscreen.addActor(slo)
myscreen.addActor(shi)
myscreen.render()
#myscreen.iren.Start()
#raw_input("Press Enter to terminate")
time.sleep(1)
myscreen.removeActor(slo)
myscreen.removeActor(shi)
print "done."
myscreen.render()
#lwr.SetFileName(filename)
#raw_input("Press Enter to terminate")
time.sleep(0.2)
lwr.Write()
myscreen.iren.Start()
def main(filename="frame/f.png", yc=6, n=0):
f = ocl.Ocode()
f.set_depth(10)
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(50, 22, 40)
myscreen.camera.SetFocalPoint(0, 0, 0)
myscreen.camera.Azimuth(n * 0.5)
# box around octree
oct_cube = camvtk.Cube(center=(0, 0, 0), length=40, color=camvtk.white)
oct_cube.SetWireframe()
myscreen.addActor(oct_cube)
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
arrowcenter = (1, 2, 0)
xar = camvtk.Arrow(color=camvtk.red, center=arrowcenter, rotXYZ=(0, 0, 0))
myscreen.addActor(xar)
yar = camvtk.Arrow(color=camvtk.green,
center=arrowcenter,
rotXYZ=(0, 0, 90))
myscreen.addActor(yar)
zar = camvtk.Arrow(color=camvtk.blue,
center=arrowcenter,
rotXYZ=(0, -90, 0))
myscreen.addActor(zar)
t = ocl.LinOCT()
#t2 = ocl.LinOCT()
t.init(3)
#t2.init(3)
print " after init() t :", t.str()
#print " after init() t2 :", t2.str()
# sphere
svol = ocl.SphereOCTVolume()
svol.radius = 3.2
svol.center = ocl.Point(1, 0, 3)
# cube
cube1 = ocl.CubeOCTVolume()
cube1.side = 69
cube1.center = ocl.Point(0, 0, 0)
#cylinder
cylvol = ocl.CylinderOCTVolume()
cylvol.p2 = ocl.Point(0, 0, 4)
cylvol.radius = 4
c = ocl.CylCutter(1)
c.length = 3
print "cutter length=", c.length
p1 = ocl.Point(0, 0, 0)
p2 = ocl.Point(1, 1.4, 0)
g1vol = ocl.CylMoveOCTVolume(c, p1, p2)
cyl1 = camvtk.Cylinder(center=(p1.x, p1.y, p1.z),
radius=c.radius,
height=c.length,
rotXYZ=(90, 0, 0),
color=camvtk.grey)
cyl1.SetWireframe()
myscreen.addActor(cyl1)
cyl2 = camvtk.Cylinder(center=(p2.x, p2.y, p2.z),
radius=c.radius,
height=c.length,
rotXYZ=(90, 0, 0),
color=camvtk.grey)
cyl2.SetWireframe()
myscreen.addActor(cyl2)
startp = camvtk.Sphere(center=(p1.x, p1.y, p1.z),
radius=0.1,
color=camvtk.green)
myscreen.addActor(startp)
endp = camvtk.Sphere(center=(p2.x, p2.y, p2.z),
radius=0.1,
color=camvtk.red)
myscreen.addActor(endp)
t.build(g1vol)
#print "t2 build()"
#t2.build(cube1)
#print " t2 after build() ", t2.size()
#t2.condense()
#print " t2 after condense() ", t2.size()
# original trees
drawTree(myscreen, t, opacity=1, color=camvtk.green)
#drawTree(myscreen,t2,opacity=1, color=camvtk.red)
#print " diff12()...",
#t3 = t2.operation(1,t)
#print "done."
#print " diff21()...",
#t4 = t2.operation(2,t)
#print "done."
#print " intersection()...",
#t5 = t2.operation(3,t)
#print "done."
#print " sum()...",
#t6 = t2.operation(4,t)
#print "done."
#print " difference 1-2 t3 (blue) =", t3.size()
#print " difference 2-1 t4 (yellow)=", t4.size()
#print " intersection t5 (pink) =", t5.size()
#print " union t6 (grey) =", t6.size()
#drawTree(myscreen,t3,opacity=1, color=camvtk.blue, offset=(0,15,0))
#drawTree(myscreen,t4,opacity=1, color=camvtk.yellow,offset=(0,-15,0))
#drawTree(myscreen,t5,opacity=1, color=camvtk.pink,offset=(-15,0,0))
#drawTree(myscreen,t6,opacity=1, color=camvtk.grey,offset=(-15,-15,0))
title = camvtk.Text()
title.SetPos((myscreen.width - 350, myscreen.height - 30))
title.SetText("OpenCAMLib " +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.addActor(title)
#st2 = camvtk.Text()
#ytext = "Linear OCTree set operations: difference, intersection, union"
#st2.SetText(ytext)
#st2.SetPos( (50, myscreen.height-30) )
#myscreen.addActor( st2)
#st3 = camvtk.Text()
#text = "Original OCTrees\n Ball:%d nodes\n Cube: %d nodes" % ( t.size(), t2.size() )
#st3.SetText(text)
#st3.SetPos( (50, 200) )
#myscreen.addActor( st3)
#st4 = camvtk.Text()
#un = " Union (grey): %d nodes\n" % (t6.size())
#int = " Intersection (pink): %d nodes\n" % (t5.size())
#diff1 = " difference Cube-Ball (blue): %d nodes\n" % (t3.size())
#diff2 = " difference Ball-Cube (yellow): %d nodes\n" % (t4.size())
#text= un+int+diff1+diff2
#st4.SetText(text)
#st4.SetPos( (50, 100) )
#myscreen.addActor( st4)
myscreen.render()
lwr.SetFileName(filename)
time.sleep(0.2)
#lwr.Write()
myscreen.iren.Start()
def main(ycoord=0.970, filename="test"):
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(2, 5, 5)
myscreen.camera.SetFocalPoint(1.38, 1, 0)
#ycoord = 1.1
a = cam.Point(3, ycoord, -2)
b = cam.Point(-1, ycoord, 3)
myscreen.addActor(camvtk.Point(center=(a.x, a.y, a.z), color=(1, 0, 1)))
myscreen.addActor(camvtk.Point(center=(b.x, b.y, b.z), color=(1, 0, 1)))
#c=cam.Point(0,0,0.3)
myscreen.addActor(camvtk.Line(p1=(a.x, a.y, a.z), p2=(b.x, b.y, b.z)))
#t = cam.Triangle(a,b,c)
cutter = cam.BullCutter(1, 0.2, 20)
print(cutter)
xar = camvtk.Arrow(color=camvtk.red, rotXYZ=(0, 0, 0))
myscreen.addActor(xar)
yar = camvtk.Arrow(color=camvtk.green, rotXYZ=(0, 0, 90))
myscreen.addActor(yar)
zar = camvtk.Arrow(color=camvtk.blue, rotXYZ=(0, -90, 0))
myscreen.addActor(zar)
cl = cam.Point(2.1748, 1, 0)
radius1 = 1
radius2 = 0.25
tor = camvtk.Toroid(r1=radius1,
r2=radius2,
center=(cl.x, cl.y, cl.z),
rotXYZ=(0, 0, 0))
#tor.SetWireframe()
#myscreen.addActor(tor)
cyl = camvtk.Cylinder(center=(cl.x, cl.y, cl.z),
radius=radius1,
height=2,
color=(0, 1, 1),
rotXYZ=(90, 0, 0),
resolution=50)
#myscreen.addActor(cyl)
cl_line = camvtk.Line(p1=(cl.x, cl.y, -100),
p2=(cl.x, cl.y, +100),
color=camvtk.red)
myscreen.addActor(cl_line)
tube = camvtk.Tube(p1=(a.x, a.y, a.z), p2=(b.x, b.y, b.z), color=(1, 1, 0))
tube.SetOpacity(0.2)
myscreen.addActor(tube)
# cylindrical-cutter circle at z=0 plane
#cir= camvtk.Circle(radius=radius1, center=(cl.x,cl.y,cl.z), color=camvtk.yellow)
#myscreen.addActor(cir)
#clp = camvtk.Point(center=(cl.x,cl.y,cl.z))
#myscreen.addActor(clp)
# short axis of ellipse = radius2
# long axis of ellipse = radius2/sin(theta)
# where theta is the slope of the line
dx = b.x - a.x
dz = b.z - a.z
#print "dx=", dx
#print "dz=", dz
theta = math.atan(dz /
dx) ## dx==0 is special case!! (i.e. vertical lines)
print("theta=", theta)
a_axis = abs(radius2 / math.sin(theta))
print("a=", a_axis)
# ellipse
#a=2
b_axis = radius2
print("b= ", b_axis)
# slice the tube with a plane at z=0 and find the ellipse center
# line is from Point a to b:
# a + t*(b-a)
# find t so that z-component is zero:
# a.z + t( b.z -a.z) = 0
# t= a.z / (b.z - a.z)
# so point
tparam = -a.z / (b.z - a.z) # NOTE horizontal lines are a special case!!
ellcenter = a + tparam * (b - a)
print("ellcenter (z=0?) =", ellcenter)
# center of the
# ecen_tmp=cam.Point(ellcenter,a.y,0)
#drawellipse(myscreen, ellcenter, a_axis, b_axis)
oe = cam.Ellipse(ellcenter, a_axis, b_axis, radius1)
#oe2 = cam.Ellipse(ellcenter, a_axis, b_axis, 0.05) # to locate text on the outside of the ellipse
nmax = 20
#delta=0.05
#td = 1
t = camvtk.Text()
t.SetPos((myscreen.width - 450, myscreen.height - 30))
myscreen.addActor(t)
t2 = camvtk.Text()
ytext = "Y: %3.3f" % (ycoord)
t2.SetText(ytext)
t2.SetPos((50, myscreen.height - 150))
myscreen.addActor(t2)
#w2if = vtk.vtkWindowToImageFilter()
#w2if.SetInput(myscreen.renWin)
#lwr = vtk.vtkPNGWriter()
#lwr.SetInput( w2if.GetOutput() )
epos = cam.Epos()
epos.setS(0, 1)
#epos1.setS(0,1)
t.SetText("OpenCAMLib 10.03-beta, " +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
#p5 = oe.ePoint(epos5)
#pt = oe2.oePoint(epos5)
#print "before= ", epos5.s, " , ", epos5.t
nsteps = cam.Ellipse.solver(oe, cl)
epos = oe.epos1
cce = oe.ePoint(epos)
cle = oe.oePoint(epos)
#epos2 = cam.Epos()
#epos.s = epos.s
#epos.t = epos.t
#print nsteps
print("solution1 at: ", epos.s, " , ", epos.t)
#print "solution2 at: ", epos2.s , " , ", epos2.t
print(" cl =", cl)
print(" cle=", cle)
xoffset = cl.x - cle.x
print("xoffset= ", xoffset)
# we slide xoffset along the x-axis from ellcenter
# to find the correct z-plane
# line is: a + t*(b-a)
# find t so that x-component is ellcenter.x + xoffset
# a.x + t(b.x-a.x) = ellcenter.x + xoffset
# t= (ellcenter.x + xoffset - a.x) / (b.x - a.x)
tparam2 = (ellcenter.x + xoffset - a.x) / (b.x - a.x)
slide = tparam2 * (b - a)
print("sliding z-delta: ", slide.z)
elc2 = a + tparam2 * (b - a)
print("ellcenter2=", elc2)
#convlist.append(nsteps)
fe = cam.Ellipse(elc2, a_axis, b_axis, radius1)
fecen = camvtk.Sphere(center=(elc2.x, elc2.y, elc2.z),
radius=0.01,
color=camvtk.pink)
myscreen.addActor(fecen)
fccp = fe.ePoint(epos)
fclp = fe.oePoint(epos)
print("solver cl=", fclp, " == ", cl, " ??")
fcir = camvtk.Circle(radius=radius1,
center=(cl.x, cl.y, elc2.z),
color=camvtk.yellow)
myscreen.addActor(fcir)
fccpoint = camvtk.Sphere(center=(fccp.x, fccp.y, fccp.z),
radius=0.01,
color=camvtk.green)
myscreen.addActor(fccpoint)
fclpoint = camvtk.Sphere(center=(fclp.x, fclp.y, fclp.z),
radius=0.01,
color=camvtk.blue)
myscreen.addActor(fclpoint)
# line from ellipse center to fcc
myscreen.addActor(
camvtk.Line(p1=(elc2.x, elc2.y, elc2.z),
p2=(fccp.x, fccp.y, fccp.z),
color=camvtk.cyan))
# the offset normal
myscreen.addActor(
camvtk.Line(p1=(fclp.x, fclp.y, fclp.z),
p2=(fccp.x, fccp.y, fccp.z),
color=camvtk.yellow))
drawellipse(myscreen, elc2, a_axis, b_axis)
#convtext = "%i" % (nsteps)
#print (pt.x, pt.y, pt.z)
#center=(pt.x, pt.y, pt.z)
#tst = camvtk.Text3D( color=(1,1,1), center=(pt.x, pt.y, 0) ,
#text=convtext, scale=0.02)
#tst.SetCamera(myscreen.camera)
#myscreen.addActor(tst)
colmax = 11
colmin = 4
nsteps = nsteps - colmin
colmax = colmax - colmin
convcolor = (float(nsteps * nsteps) / (colmax), float(
(colmax - nsteps)) / colmax, 0)
#esphere = camvtk.Sphere(center=(p5.x,p5.y,0), radius=0.01, color=convcolor)
end_sphere = camvtk.Sphere(center=(cce.x, cce.y, 0),
radius=0.01,
color=camvtk.green)
cl_sphere = camvtk.Sphere(center=(cle.x, cle.y, 0),
radius=0.01,
color=camvtk.pink)
cl_sphere.SetOpacity(0.4)
clcir = camvtk.Circle(radius=radius1,
center=(cle.x, cle.y, cle.z),
color=camvtk.pink)
myscreen.addActor(clcir)
#myscreen.addActor(esphere)
myscreen.addActor(end_sphere)
myscreen.addActor(cl_sphere)
#myscreen.render()
print("done.")
myscreen.render()
lwr.SetFileName(filename)
#lwr.Write()
#raw_input("Press Enter to terminate")
#time.sleep(0.5)
myscreen.iren.Start()
def main(filename="frame/f.png", yc=6, n=0):
print ocl.revision()
f = ocl.Ocode()
f.set_depth(7)
f.set_scale(1)
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(50, 22, 40)
myscreen.camera.SetFocalPoint(0, 0, 0)
myscreen.camera.Azimuth(n * 0.5)
# box around octree
oct_cube = camvtk.Cube(center=(0, 0, 0),
length=4 * f.get_scale(),
color=camvtk.white)
oct_cube.SetWireframe()
myscreen.addActor(oct_cube)
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
arrowcenter = (1, 2, 0)
xar = camvtk.Arrow(color=camvtk.red, center=arrowcenter, rotXYZ=(0, 0, 0))
myscreen.addActor(xar)
yar = camvtk.Arrow(color=camvtk.green,
center=arrowcenter,
rotXYZ=(0, 0, 90))
myscreen.addActor(yar)
zar = camvtk.Arrow(color=camvtk.blue,
center=arrowcenter,
rotXYZ=(0, -90, 0))
myscreen.addActor(zar)
t = ocl.LinOCT()
t2 = ocl.LinOCT()
t.init(0)
#exit()
t2.init(2)
#drawTree2(myscreen, t, opacity=0.2)
#myscreen.render()
#myscreen.iren.Start()
#exit()
print " after init() t :", t.str()
#print " after init() t2 :", t2.str()
# sphere
svol = ocl.SphereOCTVolume()
svol.radius = 1
svol.center = ocl.Point(0, 0, 1)
svol.calcBB()
# cube
cube1 = ocl.CubeOCTVolume()
cube1.side = 2.123
cube1.center = ocl.Point(0, 0, 0)
cube1.calcBB()
#cylinder
cylvol = ocl.CylinderOCTVolume()
cylvol.p2 = ocl.Point(1, 5, -2)
cylvol.radius = 0.4
cylvol.calcBB()
# draw exact cylinder
cp = 0.5 * (cylvol.p1 + cylvol.p2)
height = (cylvol.p2 - cylvol.p1).norm()
cylvolactor = camvtk.Cylinder(center=(cp.x, cp.y,
cp.z - float(height) / 2),
radius=cylvol.radius,
height=height,
rotXYZ=(90, 0, 0))
cylvolactor.SetWireframe()
#myscreen.addActor(cylvolactor)
c = ocl.CylCutter(1)
c.length = 3
print "cutter length=", c.length
p1 = ocl.Point(0.2, 0.2, 0)
p2 = ocl.Point(1.5, 1.5, -1)
g1vol = ocl.CylMoveOCTVolume(c, p1, p2)
cyl1 = camvtk.Cylinder(center=(p1.x, p1.y, p1.z),
radius=c.radius,
height=c.length,
rotXYZ=(90, 0, 0),
color=camvtk.grey)
cyl1.SetWireframe()
myscreen.addActor(cyl1)
cyl2 = camvtk.Cylinder(center=(p2.x, p2.y, p2.z),
radius=c.radius,
height=c.length,
rotXYZ=(90, 0, 0),
color=camvtk.grey)
cyl2.SetWireframe()
myscreen.addActor(cyl2)
startp = camvtk.Sphere(center=(p1.x, p1.y, p1.z),
radius=0.1,
color=camvtk.green)
myscreen.addActor(startp)
endp = camvtk.Sphere(center=(p2.x, p2.y, p2.z),
radius=0.1,
color=camvtk.red)
myscreen.addActor(endp)
#t.build( g1vol )
t_before = time.time()
#t.build( g1vol )
t.build(svol)
t_after = time.time()
print "build took ", t_after - t_before, " s"
t_before = time.time()
t2.build(cube1)
t_after = time.time()
print "build took ", t_after - t_before, " s"
#t.sort()
#t2.sort()
print "calling diff()...",
t_before = time.time()
#dt = t2.operation(1,t)
t2.diff(t)
t_after = time.time()
print "done."
print "diff took ", t_after - t_before, " s"
print "diff has ", t2.size(), " nodes"
#drawBB( myscreen, g1vol)
#print "drawBB() done"
# original trees
print "drawing trees"
drawTree2(myscreen, t, opacity=1, color=camvtk.green)
drawTree2(myscreen, t2, opacity=0.2, color=camvtk.cyan)
drawTree2(myscreen, t2, opacity=1, color=camvtk.cyan, offset=(5, 0, 0))
# box-volume
#cor = g1vol.box.corner
#v1 = g1vol.box.v1 + cor
#v2 = g1vol.box.v2 + cor
#v3 = g1vol.box.v3 + cor
#myscreen.addActor( camvtk.Sphere(center=(cor.x,cor.y,cor.z), radius=0.1, color=camvtk.red) )
#myscreen.addActor( camvtk.Sphere(center=(v1.x,v1.y,v1.z), radius=0.1, color=camvtk.blue) )
#myscreen.addActor( camvtk.Sphere(center=(v2.x,v2.y,v2.z), radius=0.1, color=camvtk.cyan) )
#myscreen.addActor( camvtk.Sphere(center=(v3.x,v3.y,v3.z), radius=0.1, color=camvtk.pink) )
# elliptical tube
pmax = p1 + 1.5 * (p2 - p1)
pmin = p1 - 0.5 * (p2 - p1)
myscreen.addActor(
camvtk.Sphere(center=(pmax.x, pmax.y, pmax.z),
radius=0.1,
color=camvtk.lgreen))
myscreen.addActor(
camvtk.Sphere(center=(pmin.x, pmin.y, pmin.z),
radius=0.1,
color=camvtk.pink))
aaxis = pmin + ocl.Point(-0.353553, 0.353553, 0)
baxis = pmin + ocl.Point(0.0243494, 0.0243494, 0.126617)
myscreen.addActor(
camvtk.Sphere(center=(aaxis.x, aaxis.y, aaxis.z),
radius=0.1,
color=camvtk.orange))
myscreen.addActor(
camvtk.Sphere(center=(baxis.x, baxis.y, baxis.z),
radius=0.1,
color=camvtk.yellow))
##camvtk.Cylinder(center=(pmin.x,pmin.y,pmin.z), radius=0.1, color=camvtk.pink)
"""
for n in xrange(0,30):
tp = ocl.Point(2.5,2.5,2-n*0.3)
tpc = camvtk.black
if (cylvol.isInside(tp)):
tpc = camvtk.red
else:
tpc = camvtk.cyan
tp_sphere = camvtk.Sphere(center=(tp.x,tp.y,tp.z), radius=0.1, color= tpc)
myscreen.addActor(tp_sphere)
"""
#drawTree(myscreen,t2,opacity=1, color=camvtk.red)
#print " diff12()...",
#t3 = t2.operation(1,t)
#print "done."
#print " diff21()...",
#t4 = t2.operation(2,t)
#print "done."
#print " intersection()...",
#t5 = t2.operation(3,t)
#print "done."
#print " sum()...",
#t6 = t2.operation(4,t)
#print "done."
#print " difference 1-2 t3 (blue) =", t3.size()
#print " difference 2-1 t4 (yellow)=", t4.size()
#print " intersection t5 (pink) =", t5.size()
#print " union t6 (grey) =", t6.size()
#drawTree(myscreen,t3,opacity=1, color=camvtk.blue, offset=(0,15,0))
#drawTree(myscreen,t4,opacity=1, color=camvtk.yellow,offset=(0,-15,0))
#drawTree(myscreen,t5,opacity=1, color=camvtk.pink,offset=(-15,0,0))
#drawTree(myscreen,t6,opacity=1, color=camvtk.grey,offset=(-15,-15,0))
title = camvtk.Text()
title.SetPos((myscreen.width - 350, myscreen.height - 30))
title.SetText("OpenCAMLib " +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.addActor(title)
#st2 = camvtk.Text()
#ytext = "Linear OCTree set operations: difference, intersection, union"
#st2.SetText(ytext)
#st2.SetPos( (50, myscreen.height-30) )
#myscreen.addActor( st2)
#st3 = camvtk.Text()
#text = "Original OCTrees\n Ball:%d nodes\n Cube: %d nodes" % ( t.size(), t2.size() )
#st3.SetText(text)
#st3.SetPos( (50, 200) )
#myscreen.addActor( st3)
#st4 = camvtk.Text()
#un = " Union (grey): %d nodes\n" % (t6.size())
#int = " Intersection (pink): %d nodes\n" % (t5.size())
#diff1 = " difference Cube-Ball (blue): %d nodes\n" % (t3.size())
#diff2 = " difference Ball-Cube (yellow): %d nodes\n" % (t4.size())
#text= un+int+diff1+diff2
#st4.SetText(text)
#st4.SetPos( (50, 100) )
#myscreen.addActor( st4)
print " render()...",
myscreen.render()
print "done."
lwr.SetFileName(filename)
time.sleep(0.2)
#lwr.Write()
myscreen.iren.Start()
def main():
print ocl.revision()
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(-15, -8, 15)
myscreen.camera.SetFocalPoint(0, 0, 0)
# axis arrows
camvtk.drawArrows(myscreen, center=(0, 0, 0))
s = ocl.SphereOCTVolume()
s.center = ocl.Point(-2.50, -0.6, 0)
s.radius = 0.6345
#sphere = camvtk.Sphere( center=(s.center.x,s.center.y,s.center.z), radius=s.radius, color=camvtk.cyan)
#sphere.SetOpacity(0.1)
#myscreen.addActor( sphere );
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
# text
camvtk.drawOCLtext(myscreen)
octtext = camvtk.Text()
octtext.SetPos((myscreen.width - 400, myscreen.height - 290))
myscreen.addActor(octtext)
cp = ocl.Point(0, 0, -3)
#depths = [3, 4, 5, 6, 7, 8]
max_depth = 7
root_scale = 3
t = ocl.Octree(root_scale, max_depth, cp)
t.init(4)
n = 0 # the frame number
nmax = 30
theta = 0
dtheta = 0.05
s.center = ocl.Point(1.5 * math.cos(theta), 0.3 * math.sin(theta), theta)
mc = ocl.MarchingCubes()
tris = []
while (n <= nmax):
print "diff...",
t_before = time.time()
t.diff_negative(s)
t_after = time.time()
build_time = t_after - t_before
print "done in ", build_time, " s"
infotext = "Octree + Marching-Cubes test\nmax octree-depth:%i \ntriangles: %i \nbuild() time: %f ms" % (
max_depth, len(tris), build_time * 1e3)
octtext.SetText(infotext)
if n == nmax:
t_before = time.time()
print "mc()...",
tris = mc.mc_tree(t) #.mc_triangles()
t_after = time.time()
mc_time = t_after - t_before
print "done in ", mc_time, " s"
print " mc() got ", len(tris), " triangles"
mc_surf = camvtk.STLSurf(triangleList=tris, color=camvtk.red)
mc_surf.SetWireframe()
mc_surf.SetColor(camvtk.cyan)
print " STLSurf()...",
myscreen.addActor(mc_surf)
print "done."
#nodes = t.get_leaf_nodes()
#allpoints=[]
#for no in nodes:
# verts = no.vertices()
# for v in verts:
# allpoints.append(v)
#oct_points = camvtk.PointCloud( allpoints )
#print " PointCloud()...",
#myscreen.addActor( oct_points )
#print "done."
print " render()...",
myscreen.render()
print "done."
#lwr.SetFileName("frames/mc8_frame"+ ('%06d' % n)+".png")
#myscreen.camera.Azimuth( 2 )
#myscreen.render()
#w2if.Modified()
#lwr.Write()
#mc_surf.SetWireframe()
#print "sleep...",
#time.sleep(1.02)
#print "done."
if n is not nmax:
myscreen.removeActor(mc_surf)
#myscreen.removeActor( oct_points )
# move forward
theta = n * dtheta
s.center = ocl.Point(1.5 * math.cos(theta), 0.3 * math.sin(theta),
0.01 * theta)
print "center moved to", s.center
n = n + 1
print "All done."
myscreen.iren.Start()
def main(filename="frame/f.png"):
print(ocl.version())
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(-15, -8, 15)
myscreen.camera.SetFocalPoint(5, 5, 0)
# axis arrows
camvtk.drawArrows(myscreen, center=(-1, -1, 0))
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
c = ocl.CylCutter(1, 4) # cutter
c.length = 3
print("cutter length=", c.length)
# generate CL-points
stl = camvtk.STLSurf("../stl/gnu_tux_mod.stl")
polydata = stl.src.GetOutput()
s = ocl.STLSurf()
camvtk.vtkPolyData2OCLSTL(polydata, s)
print("STL surface read,", s.size(), "triangles")
print(s.getBounds())
#exit()
minx = 0
dx = 0.1
maxx = 9
miny = 0
dy = 0.4
maxy = 12
z = -17
# this generates a list of CL-points in a grid
clpoints = pyocl.CLPointGridZigZag(minx, dx, maxx, miny, dy, maxy, z)
print("generated grid with", len(clpoints), " CL-points")
# batchdropcutter
bdc = ocl.BatchDropCutter()
bdc.setSTL(s)
bdc.setCutter(c)
for p in clpoints:
bdc.appendPoint(p)
t_before = time.time()
print("threads=", bdc.getThreads())
bdc.run()
t_after = time.time()
calctime = t_after - t_before
print(" done in ", calctime, " s")
clpoints = bdc.getCLPoints()
# filter
print("filtering. before filter we have", len(clpoints), "cl-points")
t_before = time.time()
f = ocl.LineCLFilter()
f.setTolerance(0.001)
for p in clpoints:
f.addCLPoint(p)
f.run()
clpts = f.getCLPoints()
calctime = time.time() - t_before
print("after filtering we have", len(clpts), "cl-points")
print(" done in ", calctime, " s")
#exit()
# stupid init code
ocode = ocl.Ocode()
tree_maxdepth = 10
ocode.set_depth(tree_maxdepth) # depth and scale set here.
ocode.set_scale(10)
# cube
stockvol = ocl.BoxOCTVolume()
stockvol.corner = ocl.Point(0, 0, -0.5)
stockvol.v1 = ocl.Point(9, 0, 0)
stockvol.v2 = ocl.Point(0, 12, 0)
stockvol.v3 = ocl.Point(0, 0, 3.5)
stockvol.calcBB()
t_before = time.time()
stock = ocl.LinOCT()
stock.init(0)
stock.build(stockvol)
calctime = time.time() - t_before
print(" stock built in ", calctime, " s, stock.size()=", stock.size())
# draw initial octree
#tlist = pyocl.octree2trilist(stock)
#surf = camvtk.STLSurf(triangleList=tlist)
#myscreen.addActor(surf)
# draw initial cutter
#startp = ocl.Point(0,0,0)
#cyl = camvtk.Cylinder(center=(startp.x,startp.y,startp.z), radius=c.radius,
# height=c.length,
# rotXYZ=(90,0,0), color=camvtk.grey)
#cyl.SetWireframe()
#myscreen.addActor(cyl)
timetext = camvtk.Text()
timetext.SetPos((myscreen.width - 300, myscreen.height - 30))
myscreen.addActor(timetext)
ocltext = camvtk.Text()
ocltext.SetPos((myscreen.width - 300, myscreen.height - 60))
myscreen.addActor(ocltext)
ocltext.SetText("OpenCAMLib")
octtext = camvtk.Text()
octtext.SetPos((myscreen.width - 300, myscreen.height - 90))
myscreen.addActor(octtext)
octtext.SetText("Octree cutting-simulation")
infotext = camvtk.Text()
infotext.SetPos((myscreen.width - 300, myscreen.height - 180))
myscreen.addActor(infotext)
Nmoves = len(clpts)
print(Nmoves, "CL-points to process")
for n in range(0, Nmoves - 1):
timetext.SetText(datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
#if n<Nmoves-1:
print(n, " to ", n + 1, " of ", Nmoves)
startp = clpts[n] # start of move
endp = clpts[n + 1] # end of move
#t_before = time.time()
sweep = ocl.LinOCT()
sweep.init(0)
#calctime = time.time()-t_before
#print " sweep-init done in ", calctime," s, sweep.size()=",sweep.size()
g1vol = ocl.CylMoveOCTVolume(c, ocl.Point(startp.x, startp.y,
startp.z),
ocl.Point(endp.x, endp.y, endp.z))
t_before = time.time()
sweep.build(g1vol)
calctime = time.time() - t_before
print(" sweep-build done in ", calctime, " s, sweep.size()=",
sweep.size())
# draw cutter
cyl1 = camvtk.Cylinder(center=(startp.x, startp.y, startp.z),
radius=c.radius,
height=c.length,
rotXYZ=(90, 0, 0),
color=camvtk.lgreen)
cyl1.SetWireframe()
#myscreen.addActor(cyl1)
cyl2 = camvtk.Cylinder(center=(endp.x, endp.y, endp.z),
radius=c.radius,
height=c.length,
rotXYZ=(90, 0, 0),
color=camvtk.pink)
cyl2.SetWireframe()
#myscreen.addActor(cyl2)
#camvtk.drawCylCutter(myscreen, c, startp)
#camvtk.drawCylCutter(myscreen, c, endp)
myscreen.addActor(
camvtk.Line(p1=(startp.x, startp.y, startp.z),
p2=(endp.x, endp.y, endp.z),
color=camvtk.red))
#camvtk.drawTree2(myscreen,sweep,color=camvtk.red,opacity=0.5)
t_before = time.time()
stock.diff(sweep)
calctime = time.time() - t_before
print(" diff done in ", calctime, " s, stock.size()", stock.size())
info = "tree-depth:%i \nmove: %i \nstock-nodes: %i \nsweep-nodes: %i" % (
tree_maxdepth, n, stock.size(), sweep.size())
infotext.SetText(info)
if ((n != 0 and n % 10 == 0)
or n == Nmoves - 2): # draw only every m:th frame
# sweep surface
t_before = time.time()
#sweep_tlist = pyocl.octree2trilist(sweep)
sweep_tlist = sweep.get_triangles()
sweepsurf = camvtk.STLSurf(triangleList=sweep_tlist)
sweepsurf.SetColor(camvtk.red)
sweepsurf.SetOpacity(0.1)
myscreen.addActor(sweepsurf)
calctime = time.time() - t_before
print(" sweepsurf-render ", calctime, " s")
# stock surface
t_before = time.time()
#tlist = pyocl.octree2trilist(stock)
tlist = stock.get_triangles()
stocksurf = camvtk.STLSurf(triangleList=tlist)
stocksurf.SetColor(camvtk.cyan)
stocksurf.SetOpacity(1.0)
myscreen.addActor(stocksurf)
calctime = time.time() - t_before
print(" stocksurf-render ", calctime, " s")
#time.sleep(1.1)
# write screenshot to disk
lwr.SetFileName("frames/tux_frame" + ('%06d' % n) + ".png")
#lwr.SetFileName(filename)
t_before = time.time() # time the render process
myscreen.render()
w2if.Modified()
lwr.Write()
calctime = time.time() - t_before
print(" render ", calctime, " s")
#myscreen.render()
#time.sleep(0.1)
myscreen.removeActor(sweepsurf)
if n != (Nmoves - 2):
myscreen.removeActor(stocksurf)
#myscreen.removeActor(cyl1)
#myscreen.removeActor(cyl2)
#myscreen.render()
#time.sleep(0.1)
print(" render()...", )
myscreen.render()
print("done.")
#time.sleep(0.2)
myscreen.iren.Start()
def main(filename="frame/f.png"):
print(ocl.revision())
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(20, 12, 20)
myscreen.camera.SetFocalPoint(0, 0, 0)
# axis arrows
camvtk.drawArrows(myscreen, center=(2, 2, 2))
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
c = ocl.CylCutter(1) # cutter
c.length = 3
print("cutter length=", c.length)
p1 = ocl.CLPoint(-0.2, -0.2, 0.2) # start of move
p2 = ocl.CLPoint(-0.2, 0.2, 0.0) # end of move
p3 = ocl.CLPoint(0.5, 0.0, -0.5)
clpoints = []
clpoints.append(p1)
clpoints.append(p2)
clpoints.append(p3)
f = ocl.Ocode()
f.set_depth(6) # depth and scale set here.
f.set_scale(1)
# cube
cube1 = ocl.CubeOCTVolume()
cube1.side = 2.123
cube1.center = ocl.Point(0, 0, 0)
cube1.calcBB()
stock = ocl.LinOCT()
stock.init(3)
stock.build(cube1)
# draw initial octree
tlist = pyocl.octree2trilist(stock)
surf = camvtk.STLSurf(triangleList=tlist)
myscreen.addActor(surf)
Nmoves = len(clpoints)
print(Nmoves, "CL-points to process")
for n in range(0, Nmoves - 1):
#if n<Nmoves-1:
print(n, " to ", n + 1)
startp = clpoints[n]
endp = clpoints[n + 1]
sweep = ocl.LinOCT()
sweep.init(3)
g1vol = ocl.CylMoveOCTVolume(c, ocl.Point(startp.x, startp.y,
startp.z),
ocl.Point(endp.x, endp.y, endp.z))
camvtk.drawCylCutter(myscreen, c, startp)
camvtk.drawCylCutter(myscreen, c, endp)
myscreen.addActor(
camvtk.Line(p1=(startp.x, startp.y, startp.z),
p2=(endp.x, endp.y, endp.z),
color=camvtk.red))
sweep.build(g1vol)
stock.diff(sweep)
myscreen.removeActor(surf)
tlist = pyocl.octree2trilist(stock)
surf = camvtk.STLSurf(triangleList=tlist)
surf.SetColor(camvtk.cyan)
surf.SetOpacity(1.0)
myscreen.addActor(surf)
myscreen.render()
time.sleep(0.2)
#exit()
# draw trees
#print "drawing trees"
#camvtk.drawTree2(myscreen, stock, opacity=1, color=camvtk.cyan)
# box around octree
oct_cube = camvtk.Cube(center=(0, 0, 0),
length=4 * f.get_scale(),
color=camvtk.white)
oct_cube.SetWireframe()
myscreen.addActor(oct_cube)
# OCL text
title = camvtk.Text()
title.SetPos((myscreen.width - 350, myscreen.height - 30))
title.SetText("OpenCAMLib " +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.addActor(title)
print(" render()...", )
myscreen.render()
print("done.")
lwr.SetFileName(filename)
time.sleep(0.2)
#lwr.Write()
myscreen.iren.Start()
def main():
print ocl.revision()
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(-8, -4, 25)
myscreen.camera.SetFocalPoint(0,0, 0)
arpos=-1.5
camvtk.drawArrows(myscreen,center=(arpos,arpos,arpos))
camvtk.drawOCLtext(myscreen)
octtext = camvtk.Text()
octtext.SetPos( (70, myscreen.height-600) )
myscreen.addActor( octtext)
octtext.SetText("Octree")
vertex = [ ocl.Point( 1, 1,-1), #// 0
ocl.Point(-1, 1,-1), #// 1
ocl.Point(-1,-1,-1), #// 2
ocl.Point( 1,-1,-1), #// 3
ocl.Point( 1, 1, 1), #// 4
ocl.Point(-1, 1, 1), #// 5
ocl.Point(-1,-1, 1), #// 6
ocl.Point( 1,-1, 1) #// 7
]
n=0
for v in vertex:
myscreen.addActor( camvtk.Sphere(center=(v.x,v.y,v.z), radius=0.1,color=camvtk.red))
v=v
t = camvtk.Text3D(color=camvtk.red, center=(v.x+0.1,v.y+0.1,v.z), text=str(n), scale=0.2, camera=myscreen.camera)
myscreen.addActor(t)
n=n+1
edgeTable = [ [0,1] ,
[1,2] ,
[2,3] ,
[3,0] ,
[4,5] ,
[5,6] ,
[6,7] ,
[7,4] ,
[0,4] ,
[1,5] ,
[2,6] ,
[3,7] ,
]
# draw the edges as tubes
ne = 0
for e in edgeTable:
ep1 = vertex[ e[0] ]
ep2 = vertex[ e[1] ]
tu = camvtk.Tube( p1=(ep1.x,ep1.y,ep1.z), p2=(ep2.x,ep2.y,ep2.z), radius=0.051, color=camvtk.green )
myscreen.addActor(tu)
mid = 0.5*(ep1 + ep2)
t = camvtk.Text3D(color=camvtk.green, center=(mid.x+0.1,mid.y+0.1,mid.z), text=str(ne), scale=0.2, camera=myscreen.camera)
myscreen.addActor(t)
ne=ne+1
# number the faces
face = [ [2,3,6,7] ,
[0,3,4,7] ,
[0,1,4,5] ,
[1,2,5,6] ,
[0,1,2,3] ,
[4,5,6,7] ,
]
nf=0
for f in face:
mid = ocl.Point()
for v in f:
mid = mid+vertex[v]
mid=0.25*mid
t = camvtk.Text3D(color=camvtk.blue, center=(mid.x,mid.y,mid.z), text=str(nf), scale=0.2, camera=myscreen.camera)
myscreen.addActor(t)
nf=nf+1
myscreen.render()
print "All done."
myscreen.iren.Start()
def main(filename="frame/f.png", yc=6, n=0):
f = ocl.Ocode()
f.set_depth(8)
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(50, 22, 40)
myscreen.camera.SetFocalPoint(0, 0, 0)
myscreen.camera.Azimuth(n * 0.5)
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
xar = camvtk.Arrow(color=camvtk.red, center=(10, 20, 0), rotXYZ=(0, 0, 0))
myscreen.addActor(xar)
yar = camvtk.Arrow(color=camvtk.green,
center=(10, 20, 0),
rotXYZ=(0, 0, 90))
myscreen.addActor(yar)
zar = camvtk.Arrow(color=camvtk.blue,
center=(10, 20, 0),
rotXYZ=(0, -90, 0))
myscreen.addActor(zar)
t = ocl.LinOCT()
t2 = ocl.LinOCT()
t.init(3)
t2.init(3)
print " after init() t :", t.str()
print " after init() t2 :", t2.str()
svol = ocl.SphereOCTVolume()
svol.radius = 3
svol.center = ocl.Point(1, 0, 3)
cube1 = ocl.CubeOCTVolume()
cube1.side = 6
cube1.center = ocl.Point(0, 0, 0)
cube2 = ocl.CubeOCTVolume()
cube2.center = ocl.Point(1, 2, 0)
cube2.side = 30
print "t build()"
t.build(svol)
print " t after build() ", t.size()
t.condense()
print " t after condense() ", t.size()
print "t2 build()"
t2.build(cube1)
print " t2 after build() ", t2.size()
t2.condense()
print " t2 after condense() ", t2.size()
# original trees
drawTree(myscreen, t, opacity=1, color=camvtk.green)
drawTree(myscreen, t2, opacity=1, color=camvtk.red)
print " diff12()...",
t3 = t2.operation(1, t)
print "done."
print " diff21()...",
t4 = t2.operation(2, t)
print "done."
print " intersection()...",
t5 = t2.operation(3, t)
print "done."
print " sum()...",
t6 = t2.operation(4, t)
print "done."
print " difference 1-2 t3 (blue) =", t3.size()
print " difference 2-1 t4 (yellow)=", t4.size()
print " intersection t5 (pink) =", t5.size()
print " union t6 (grey) =", t6.size()
drawTree(myscreen, t3, opacity=1, color=camvtk.blue, offset=(0, 15, 0))
drawTree(myscreen, t4, opacity=1, color=camvtk.yellow, offset=(0, -15, 0))
drawTree(myscreen, t5, opacity=1, color=camvtk.pink, offset=(-15, 0, 0))
drawTree(myscreen, t6, opacity=1, color=camvtk.grey, offset=(-15, -15, 0))
title = camvtk.Text()
title.SetPos((myscreen.width - 350, myscreen.height - 30))
title.SetText("OpenCAMLib " +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.addActor(title)
st2 = camvtk.Text()
ytext = "Linear OCTree set operations: difference, intersection, union"
st2.SetText(ytext)
st2.SetPos((50, myscreen.height - 30))
myscreen.addActor(st2)
st3 = camvtk.Text()
text = "Original OCTrees\n Ball:%d nodes\n Cube: %d nodes" % (t.size(),
t2.size())
st3.SetText(text)
st3.SetPos((50, 200))
myscreen.addActor(st3)
st4 = camvtk.Text()
un = " Union (grey): %d nodes\n" % (t6.size())
int = " Intersection (pink): %d nodes\n" % (t5.size())
diff1 = " difference Cube-Ball (blue): %d nodes\n" % (t3.size())
diff2 = " difference Ball-Cube (yellow): %d nodes\n" % (t4.size())
text = un + int + diff1 + diff2
st4.SetText(text)
st4.SetPos((50, 100))
myscreen.addActor(st4)
myscreen.render()
lwr.SetFileName(filename)
time.sleep(0.2)
#lwr.Write()
myscreen.iren.Start()
def main():
myscreen = camvtk.VTKScreen()
focal = cam.Point(5, 5, 0)
r = 30
theta = (float(45) / 360) * 2 * math.pi
fi = 45
campos = cam.Point(r * math.sin(theta) * math.cos(fi),
r * math.sin(theta) * math.sin(fi), r * math.cos(theta))
myscreen.camera.SetPosition(campos.x, campos.y, campos.z)
myscreen.camera.SetFocalPoint(focal.x, focal.y, focal.z)
t = camvtk.Text()
t.SetPos((myscreen.width - 450, myscreen.height - 30))
myscreen.addActor(t)
t2 = camvtk.Text()
ytext = "kd-tree debug" #"Y: %3.3f" % (ycoord)
t2.SetText(ytext)
t2.SetPos((50, myscreen.height - 50))
myscreen.addActor(t2)
#w2if = vtk.vtkWindowToImageFilter()
#w2if.SetInput(myscreen.renWin)
#lwr = vtk.vtkPNGWriter()
#lwr.SetInput( w2if.GetOutput() )
t.SetText("OpenCAMLib 10.03-beta, " +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
#ycoord = 1.1
stl = camvtk.STLSurf(filename="../stl/demo.stl")
#stl = camvtk.STLSurf(filename="../stl/demo2.stl")
print "STL surface read"
#myscreen.addActor(stl)
#stl.SetWireframe()
#stl.SetColor((0.5,0.5,0.5))
polydata = stl.src.GetOutput()
s = cam.STLSurf()
camvtk.vtkPolyData2OCLSTL(polydata, s)
print "STLSurf with ", s.size(), " triangles"
myscreen.addActor(
camvtk.Sphere(center=(0, 0, 0), radius=0.2, color=camvtk.yellow))
s.build_kdtree()
print "built kd-tree"
s.jump_kd_reset()
tlist = s.get_kd_triangles()
print "got", len(tlist), " triangles"
while (s.jump_kd_hi()):
lotris = s.get_kd_triangles()
s.jump_kd_up()
cut = s.get_kd_cut()
s.jump_kd_lo()
hitris = s.get_kd_triangles()
lev = s.get_kd_level()
print "l=", lev, " hi=", len(hitris), " lo=", len(lotris), " cut=", cut
if (cut[0] < 2):
print "x cut ",
if (cut[0] == 0):
print "max"
myscreen.addActor(
camvtk.Line(p1=(cut[1], 100, 0),
p2=(cut[1], -100, 0),
color=camvtk.green))
else:
print "min"
myscreen.addActor(
camvtk.Line(p1=(cut[1], 100, 0),
p2=(cut[1], -100, 0),
color=camvtk.lgreen))
#myscreen.addActor( camvtk.Line( p1=(100,cut[1],0), p2=(-100,cut[1],0), color = camvtk.red ) )
else:
print "y cut ",
if (cut[0] == 2):
print "max"
myscreen.addActor(
camvtk.Line(p1=(100, cut[1], 0),
p2=(-100, cut[1], 0),
color=camvtk.red))
else:
print "min"
myscreen.addActor(
camvtk.Line(p1=(100, cut[1], 0),
p2=(-100, cut[1], 0),
color=camvtk.pink))
slo = camvtk.STLSurf(triangleList=lotris)
slo.SetColor(camvtk.pink)
slo.SetWireframe()
shi = camvtk.STLSurf(triangleList=hitris)
shi.SetColor(camvtk.lgreen)
shi.SetWireframe()
myscreen.addActor(slo)
myscreen.addActor(shi)
myscreen.render()
myscreen.iren.Start()
raw_input("Press Enter to terminate")
time.sleep(1)
myscreen.removeActor(slo)
myscreen.removeActor(shi)
print "done."
myscreen.render()
#lwr.SetFileName(filename)
#raw_input("Press Enter to terminate")
time.sleep(0.2)
#lwr.Write()
myscreen.iren.Start()
print "none=",nn," vertex=",nv, " edge=",ne, " facet=",nf, " sum=", nn+nv+ne+nf
print len(clpoints), " cl points evaluated"
myscreen.camera.SetPosition(3, 23, 15)
myscreen.camera.SetFocalPoint(5, 5, 0)
myscreen.render()
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput( w2if.GetOutput() )
w2if.Modified()
lwr.SetFileName("tux1.png")
#lwr.Write()
t = camvtk.Text()
t.SetPos( (myscreen.width-200, myscreen.height-30) )
myscreen.addActor( t)
for n in range(1,36):
t.SetText(datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.camera.Azimuth( 1 )
time.sleep(0.01)
myscreen.render()
lwr.SetFileName("kd_frame"+ ('%03d' % n)+".png")
w2if.Modified()
#lwr.Write()
def main():
print ocl.revision()
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(-8, -4, 25)
myscreen.camera.SetFocalPoint(4.5, 6, 0)
# axis arrows
camvtk.drawArrows(myscreen, center=(-1, -1, 0))
camvtk.drawOCLtext(myscreen)
octtext = camvtk.Text()
octtext.SetPos((70, myscreen.height - 600))
myscreen.addActor(octtext)
cltext = camvtk.Text()
cltext.SetPos((70, myscreen.height - 100))
myscreen.addActor(cltext)
stl = camvtk.STLSurf("../../stl/gnu_tux_mod.stl")
#myscreen.addActor(stl)
#stl.SetWireframe()
stl.SetColor((0.5, 0.5, 0.5))
polydata = stl.src.GetOutput()
s = ocl.STLSurf()
camvtk.vtkPolyData2OCLSTL(polydata, s)
print "STL surface read,", s.size(), "triangles"
#angle = math.pi/4
radius = 0.4
length = 10
cutter = ocl.BallCutter(2 * radius, length)
#cutter = ocl.CylCutter(2*radius, length)
# generate CL-points
minx = 0
dx = 0.1 / 0.2
maxx = 9
miny = 0
dy = cutter.getRadius() / 1.5
maxy = 12
z = -1
# this generates a list of CL-points in a grid
clpoints = pyocl.CLPointGrid(minx, dx, maxx, miny, dy, maxy, z)
# batchdropcutter
bdc = ocl.BatchDropCutter()
bdc.bucketSize = 10
bdc.setSTL(s)
bdc.setCutter(cutter)
#bdc.setThreads(1) # explicitly setting one thread is better for debugging
for p in clpoints:
bdc.appendPoint(p)
t_before = time.time()
bdc.run()
t_after = time.time()
calctime = t_after - t_before
print " BDC4 done in ", calctime, " s"
dropcutter_time = calctime
clpoints = bdc.getCLPoints()
#camvtk.drawCLPointCloud(myscreen, clpoints)
print " clpts= ", len(clpoints)
myscreen.render()
#myscreen.iren.Start()
#exit()
s = ocl.BallCutterVolume()
#s = ocl.CylCutterVolume()
#s.center = ocl.Point(-2.50,-0.6,0)
s.radius = cutter.getRadius()
s.length = cutter.getLength()
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
cp = ocl.Point(5, 5, -6) # center of octree
#depths = [3, 4, 5, 6, 7, 8]
max_depth = 7
root_scale = 10
t = ocl.Octree(root_scale, max_depth, cp)
t.init(5)
n = 0 # the frame number
stockbox = ocl.PlaneVolume(1, 0, 0.1)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(0, 0, 8.9)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(1, 1, 0.1)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(0, 1, 11.9)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(1, 2, -0.5)
t.diff_negative(stockbox)
stockbox = ocl.PlaneVolume(0, 2, 3)
t.diff_negative(stockbox)
mc = ocl.MarchingCubes()
print "stock mc()...",
tris = mc.mc_tree(t) # t.mc_triangles()
print " mc() got ", len(tris), " triangles"
mc_surf = camvtk.STLSurf(triangleList=tris, color=camvtk.red)
mc_surf.SetColor(camvtk.cyan)
print "stock STLSurf()...",
myscreen.addActor(mc_surf)
print "done."
myscreen.render()
#myscreen.iren.Start()
#exit()
myscreen.removeActor(mc_surf)
renderinterleave = 10
step_time = 0
while (n < len(clpoints)):
cl = ocl.Point(clpoints[n].x, clpoints[n].y, clpoints[n].z)
s.setPos(cl)
#myscreen.addActor( camvtk.Point( center=(cl.x,cl.y,cl.z), color=camvtk.yellow))
print n, ": diff...",
t_before = time.time()
t.diff_negative(s)
t_after = time.time()
build_time = t_after - t_before
#print "done in ", build_time," s"
step_time = step_time + build_time
n = n + 1
if ((n % renderinterleave) == 0):
infotext = "Octree max_depth=%i \nCL-point %i of %i \ndiff()-time: %f ms/CL-point" % (
max_depth, n, len(clpoints),
1e3 * step_time / renderinterleave)
octtext.SetText(infotext)
postext = "X: %f\nY: %f\nZ: %f" % (cl.x, cl.y, cl.z)
cltext.SetText(postext)
cactors = camvtk.drawBallCutter(myscreen, cutter, cl)
print cactors
t_before = time.time()
print "mc()...",
tris = mc.mc_tree(t) #.mc_triangles()
t_after = time.time()
mc_time = t_after - t_before
print "done in ", mc_time, " s"
print " mc() got ", len(tris), " triangles"
mc_surf = camvtk.STLSurf(triangleList=tris, color=camvtk.red)
#mc_surf.SetWireframe()
mc_surf.SetColor(camvtk.cyan)
print " STLSurf()...",
myscreen.addActor(mc_surf)
print "done."
print " render()...",
myscreen.render()
myscreen.camera.Azimuth(0.5)
lwr.SetFileName("frames/cutsim_d9_frame" + ('%06d' % n) + ".png")
w2if.Modified()
lwr.Write()
print "done."
myscreen.removeActor(mc_surf)
for c in cactors:
myscreen.removeActor(c)
step_time = 0
#lwr.SetFileName("frames/mc8_frame"+ ('%06d' % n)+".png")
#myscreen.camera.Azimuth( 2 )
#myscreen.render()
#w2if.Modified()
#lwr.Write()
#mc_surf.SetWireframe()
#print "sleep...",
#time.sleep(1.02)
#print "done."
# move forward
#theta = n*dtheta
#sp1 = ocl.Point(s.center)
#s.center = ocl.Point( 1.7*math.cos(theta),1.3*math.sin(theta),thetalift*theta)
#sp2 = ocl.Point(s.center)
#print "line from ",sp1," to ",sp2
#if n is not nmax:
# myscreen.addActor( camvtk.Line( p1=(sp1.x,sp1.y,sp1.z),p2=(sp2.x,sp2.y,sp2.z), color=camvtk.red ) )
#print "center moved to", s.center
print " clpts= ", len(clpoints)
print "All done."
myscreen.iren.Start()
tree = buildOCTree(testvol)
print "done."
print tree
list =[]
searchOCTree(tree, list)
print len(list), " nodes in tree"
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput( w2if.GetOutput() )
w2if.Modified()
t = camvtk.Text()
t.SetPos( (myscreen.width-200, myscreen.height-30) )
myscreen.addActor( t)
t2 = camvtk.Text()
t2.SetPos( (myscreen.width-200, 30) )
myscreen.addActor( t2)
n = 0
for node in list:
addNodes(myscreen, node)
if (n%50) == 0:
nodetext = "Nodes: %5i" % (n)
t2.SetText(nodetext)
t.SetText("OpenCAMLib 10.03-beta " + datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
myscreen.render()
def main():
print(ocl.revision())
myscreen = camvtk.VTKScreen()
myscreen.camera.SetPosition(-15, -8, 15)
myscreen.camera.SetFocalPoint(0, 0, 0)
# axis arrows
camvtk.drawArrows(myscreen, center=(0, 0, 0))
s = ocl.SphereOCTVolume()
s.center = ocl.Point(0, 0, 0)
s.radius = 2.6345
sphere = camvtk.Sphere(center=(s.center.x, s.center.y, s.center.z),
radius=s.radius,
color=camvtk.cyan)
sphere.SetOpacity(0.1)
myscreen.addActor(sphere)
# screenshot writer
w2if = vtk.vtkWindowToImageFilter()
w2if.SetInput(myscreen.renWin)
lwr = vtk.vtkPNGWriter()
lwr.SetInput(w2if.GetOutput())
# text
camvtk.drawOCLtext(myscreen)
octtext = camvtk.Text()
octtext.SetPos((myscreen.width - 400, myscreen.height - 290))
myscreen.addActor(octtext)
cp = ocl.Point(0, 0, 0)
#depths = [3, 4, 5, 6, 7, 8]
depths = [4, 5]
root_scale = 3
n = 0 # the frame number
for max_depth in depths:
t = ocl.Octree(root_scale, max_depth, cp)
t.init(1)
print("build...", )
t_before = time.time()
t.diff_positive(s)
t_after = time.time()
build_time = t_after - t_before
print("done.")
tris = t.mc_triangles()
infotext = "Octree + Marching-Cubes test\nmax octree-depth:%i \ntriangles: %i \nbuild() time: %f ms" % (
max_depth, len(tris), build_time * 1e3)
octtext.SetText(infotext)
mc_surf = camvtk.STLSurf(triangleList=tris, color=camvtk.red)
#
myscreen.addActor(mc_surf)
print(" render()...", )
myscreen.render()
print("done.")
for m in range(0, 180):
# do a rotating animation
lwr.SetFileName("frames/mc8_frame" + ('%06d' % n) + ".png")
myscreen.camera.Azimuth(2)
myscreen.render()
w2if.Modified()
#lwr.Write()
if m > 90:
mc_surf.SetWireframe()
time.sleep(0.02)
n = n + 1
myscreen.removeActor(mc_surf)
myscreen.iren.Start()
