def InitSizeAndObjs(self):
# Only call this once enclosing frame has been set up, so that get correct world coord dimensions
self.canvas_resizer = CanvasResizer(canvas=self)
# Don't assert canvas size sanity anymore as wxpython3 (phoenix) doesn't set canvas size
# as quickly as wxpython2.8 does, even though frame has been sized and shown
# with frame.SetSize(WINDOW_SIZE) and frame.Show(True)
# In wxpython3 (phoenix) canvas stays at (20,20) despite the frame increasing in size to (1024,768)
# but good ole wxpython2.8 does indeed change canvas size immediately to (1024,768)
#
# assert not self.canvas_resizer.canvas_too_small(), "InitSizeAndObjs being called too early - please set up enclosing frame size first"
self.umlworkspace = UmlWorkspace()
self.layout = LayoutBasic(leftmargin=5,
topmargin=5,
verticalwhitespace=50,
horizontalwhitespace=50,
maxclassesperline=7)
self.snapshot_mgr = GraphSnapshotMgr(graph=self.umlworkspace.graph,
umlcanvas=self)
self.coordmapper = CoordinateMapper(self.umlworkspace.graph,
self.GetSize())
self.layouter = GraphLayoutSpring(self.umlworkspace.graph, gui=self)
self.overlap_remover = OverlapRemoval(self.umlworkspace.graph,
margin=50,
gui=self)
def InitSizeAndObjs(self):
# Only call this once enclosing frame has been set up, so that get correct world coord dimensions
self.canvas_resizer = CanvasResizer(canvas=self)
assert not self.canvas_resizer.canvas_too_small(
), "InitSizeAndObjs being called too early - please set up enclosing frame size first"
self.umlworkspace = UmlWorkspace()
self.layout = LayoutBasic(leftmargin=5,
topmargin=5,
verticalwhitespace=50,
horizontalwhitespace=50,
maxclassesperline=7)
self.snapshot_mgr = GraphSnapshotMgr(graph=self.umlworkspace.graph,
umlcanvas=self)
self.coordmapper = CoordinateMapper(self.umlworkspace.graph,
self.GetSize())
self.layouter = GraphLayoutSpring(self.umlworkspace.graph, gui=self)
self.overlap_remover = OverlapRemoval(self.umlworkspace.graph,
margin=50,
gui=self)
def InitSizeAndObjs(self):
# Only call this once enclosing frame has been set up, so that get correct world coord dimensions
self.canvas_resizer = CanvasResizer(canvas=self)
assert (
not self.canvas_resizer.canvas_too_small()
), "InitSizeAndObjs being called too early - please set up enclosing frame size first"
self.umlworkspace = UmlWorkspace()
self.layout = LayoutBasic(
leftmargin=5, topmargin=5, verticalwhitespace=50, horizontalwhitespace=50, maxclassesperline=7
)
self.snapshot_mgr = GraphSnapshotMgr(graph=self.umlworkspace.graph, umlcanvas=self)
self.coordmapper = CoordinateMapper(self.umlworkspace.graph, self.GetSize())
self.layouter = GraphLayoutSpring(self.umlworkspace.graph, gui=self)
self.overlap_remover = OverlapRemoval(self.umlworkspace.graph, margin=50, gui=self)
class UmlCanvas(ogl.ShapeCanvas):
def __init__(self, parent, log, frame):
ogl.ShapeCanvas.__init__(self, parent)
self.observers = multicast()
self.app = None # assigned later by app boot
self.log = log
self.frame = frame
self.SetBackgroundColour("LIGHT BLUE")
self.SetDiagram(ogl.Diagram())
self.GetDiagram().SetCanvas(self)
wx.EVT_WINDOW_DESTROY(self, self.OnDestroy)
self.Bind(wx.EVT_MOUSEWHEEL, self.OnWheelZoom)
self.Bind(wx.EVT_KEY_DOWN, self.onKeyPress)
self.Bind(wx.EVT_CHAR, self.onKeyChar)
self.font1 = wx.Font(14, wx.MODERN, wx.NORMAL, wx.NORMAL, False)
self.font2 = wx.Font(10, wx.MODERN, wx.NORMAL, wx.NORMAL, False)
self.working = False
self._kill_layout = False # flag to communicate with layout engine. aborting keypress in gui should set this to true
@property
def kill_layout(self):
return self._kill_layout
@kill_layout.setter
def kill_layout(self, value):
self._kill_layout = value
def InitSizeAndObjs(self):
# Only call this once enclosing frame has been set up, so that get correct world coord dimensions
self.canvas_resizer = CanvasResizer(canvas=self)
# Don't assert canvas size sanity anymore as wxpython3 (phoenix) doesn't set canvas size
# as quickly as wxpython2.8 does, even though frame has been sized and shown
# with frame.SetSize(WINDOW_SIZE) and frame.Show(True)
# In wxpython3 (phoenix) canvas stays at (20,20) despite the frame increasing in size to (1024,768)
# but good ole wxpython2.8 does indeed change canvas size immediately to (1024,768)
#
# assert not self.canvas_resizer.canvas_too_small(), "InitSizeAndObjs being called too early - please set up enclosing frame size first"
self.umlworkspace = UmlWorkspace()
self.layout = LayoutBasic(leftmargin=5,
topmargin=5,
verticalwhitespace=50,
horizontalwhitespace=50,
maxclassesperline=7)
self.snapshot_mgr = GraphSnapshotMgr(graph=self.umlworkspace.graph,
umlcanvas=self)
self.coordmapper = CoordinateMapper(self.umlworkspace.graph,
self.GetSize())
self.layouter = GraphLayoutSpring(self.umlworkspace.graph, gui=self)
self.overlap_remover = OverlapRemoval(self.umlworkspace.graph,
margin=50,
gui=self)
def AllToLayoutCoords(self):
self.coordmapper.AllToLayoutCoords()
def AllToWorldCoords(self):
self.coordmapper.AllToWorldCoords()
def onKeyPress(self, event):
keycode = event.GetKeyCode(
) # http://www.wxpython.org/docs/api/wx.KeyEvent-class.html
if self.working:
event.Skip()
return
self.working = True
if keycode == wx.WXK_ESCAPE:
print "ESC key detected: Abort Layout"
self.kill_layout = True
if keycode == wx.WXK_RIGHT:
self.app.run.CmdLayoutExpand(remove_overlaps=not event.ShiftDown())
elif keycode == wx.WXK_LEFT:
self.app.run.CmdLayoutContract(
remove_overlaps=not event.ShiftDown())
self.working = False
event.Skip()
def onKeyChar(self, event):
"""
These are secret keycodes not exposed on the menu
Normally shortcuts added on the menu work fine.
"""
if event.GetKeyCode() >= 256:
event.Skip()
return
if self.working:
event.Skip()
return
self.working = True
keycode = chr(event.GetKeyCode())
if keycode in ['q', 'Q']:
self.NewEdgeMarkFrom()
elif keycode in ['w', 'W']:
self.NewEdgeMarkTo(edge_type='composition')
elif keycode in ['e', 'E']:
self.NewEdgeMarkTo(edge_type='generalisation')
elif keycode in ['1', '2', '3', '4', '5', '6', '7', '8']:
todisplay = ord(keycode) - ord('1')
self.snapshot_mgr.Restore(todisplay)
elif keycode == 'P':
self.Refresh()
elif keycode in ['d', 'D']:
self.app.run.CmdDumpUmlWorkspace()
elif keycode == 's':
self.CmdTrimScrollbars()
elif keycode == 'G': # and event.ShiftDown() and event.ControlDown():
self.app.run.CmdBuildColourChartWorkspace()
elif keycode in ['h', 'H']:
self.app.run.CmdColourSequential(
color_range_offset=(keycode == 'H'))
self.working = False
event.Skip()
def CmdTrimScrollbars(self):
self.canvas_resizer.resize_virtual_canvas_tofit_bounds(
shrinkage_leeway=0, bounds_dirty=True)
def CmdRememberLayout1(self):
self.snapshot_mgr.QuickSave(slot=1)
def CmdRememberLayout2(self):
self.snapshot_mgr.QuickSave(slot=2)
def CmdRestoreLayout1(self):
self.snapshot_mgr.QuickRestore(slot=1)
def CmdRestoreLayout2(self):
self.snapshot_mgr.QuickRestore(slot=2)
def SelectNodeNow(self, shape):
canvas = shape.GetCanvas()
self.app.run.CmdDeselectAllShapes()
dc = wx.ClientDC(canvas)
canvas.PrepareDC(dc)
shape.Select(
True, dc
) # could pass None as dc if you don't want to trigger the OnDrawControlPoints(dc) handler immediately - e.g. if you want to do a complete redraw of everything later anyway
# change colour when select
#shape.SetBrush(wx.WHITE_BRUSH) #wx.Brush("WHEAT", wx.SOLID))
#canvas.Refresh(False) # works
#canvas.Redraw(dc) # works too
#shape.Draw(dc) # works too, most efficient
#canvas.Refresh(False) # t/f or don't use - doesn't seem to make a difference
#self.UpdateStatusBar(shape) # only available in the shape evt handler (this method used to live there...)
def delete_shape_view(self, shape):
# View
self.app.run.CmdDeselectAllShapes()
for line in shape.GetLines()[:]:
line.Delete()
shape.Delete()
def Clear(self):
print "Draw: Clear"
self.GetDiagram().DeleteAllShapes()
dc = wx.ClientDC(self)
self.GetDiagram().Clear(
dc
) # Clears screen - don't prepare the dc or it will only clear the top scrolled bit (see my mailing list discussion)
self.umlworkspace.Clear()
if "wxMac" in wx.PlatformInfo: # Hack on Mac so that onKeyChar bindings take hold properly.
wx.CallAfter(self.SetFocus)
elif 'wxGTK' in wx.PlatformInfo: # Hack on Linux so that onKeyChar bindings take hold properly.
wx.CallLater(1500, self.app.context.wxapp.multiText.SetFocus)
wx.CallLater(1500, self.SetFocus)
def NewEdgeMarkFrom(self):
selected = [
s for s in self.GetDiagram().GetShapeList() if s.Selected()
]
if not selected:
print "Please select a node"
return
self.new_edge_from = selected[0].node
print "From", self.new_edge_from.id
def NewEdgeMarkTo(self, edge_type='composition'):
selected = [
s for s in self.GetDiagram().GetShapeList() if s.Selected()
]
if not selected:
print "Please select a node"
return
tonode = selected[0].node
print "To", tonode.id
if self.new_edge_from == None:
print "Please set from node first"
return
if self.new_edge_from.id == tonode.id:
print "Can't link to self"
return
if not self.umlworkspace.graph.FindNodeById(self.new_edge_from.id):
print "From node %s doesn't seem to be in graph anymore!" % self.new_edge_from.id
return
edge = self.umlworkspace.graph.AddEdge(
tonode, self.new_edge_from,
weight=None) # swap direction as is a directional composition.
# TODO should also arguably add to umlworkspace's associations_composition or associations_generalisation list (or create a new one for unlabelled associations like the one we are creating here)
#edge['uml_edge_type'] = ''
edge['uml_edge_type'] = edge_type
self.CreateUmlEdge(edge)
self.stateofthenation()
def CreateImageShape(self, F):
#shape = ogl.BitmapShape()
shape = BitmapShapeResizable()
img = wx.Image(F, wx.BITMAP_TYPE_ANY)
#adjusted_img = img.AdjustChannels(factor_red = 1., factor_green = 1., factor_blue = 1., factor_alpha = 0.5)
#adjusted_img = img.Rescale(10,10)
adjusted_img = img
bmp = wx.BitmapFromImage(adjusted_img)
shape.SetBitmap(bmp)
self.GetDiagram().AddShape(shape)
shape.Show(True)
evthandler = UmlShapeHandler(
self.log, self.frame, self
) # just init the handler with whatever will be convenient for it to know.
evthandler.SetShape(shape)
evthandler.SetPreviousHandler(shape.GetEventHandler())
shape.SetEventHandler(evthandler)
self.new_evthandler_housekeeping(evthandler)
setpos(shape, 0, 0)
#setpos(shape, node.left, node.top)
#node.width, node.height = shape.GetBoundingBoxMax()
#node.shape = shape
#shape.node = node
return shape
def CreateUmlShape(self, node):
def newRegion(font, name, textLst, maxWidth, totHeight=10):
# Taken from Boa, but put into the canvas class instead of the scrolled window class.
region = ogl.ShapeRegion()
if len(textLst) == 0:
return region, maxWidth, 0
dc = wx.ClientDC(self) # self is the canvas
dc.SetFont(font)
for text in textLst:
w, h = dc.GetTextExtent(text)
if w > maxWidth: maxWidth = w
totHeight = totHeight + h + 0 # interline padding
region.SetFont(font)
region.SetText('\n'.join(textLst))
region.SetName(name)
return region, maxWidth, totHeight
shape = DividedShape(width=99, height=98, canvas=self)
maxWidth = 10 # min node width, grows as we update it with text widths
"""
Future: Perhaps be able to show regions or not. Might need to totally
reconstruct the shape.
"""
#if not self.showAttributes: classAttrs = [' ']
#if not self.showMethods: classMeths = [' ']
# Create each region. If height returned is 0 this means don't create this region.
regionName, maxWidth, nameHeight = newRegion(self.font1, 'class_name',
[node.classname],
maxWidth)
regionAttribs, maxWidth, attribsHeight = newRegion(
self.font2, 'attributes', node.attrs, maxWidth)
regionMeths, maxWidth, methsHeight = newRegion(self.font2, 'methods',
node.meths, maxWidth)
# Work out total height of shape
totHeight = nameHeight + attribsHeight + methsHeight
# Set regions to be a proportion of the total height of shape
regionName.SetProportions(0.0, 1.0 * (nameHeight / float(totHeight)))
regionAttribs.SetProportions(0.0,
1.0 * (attribsHeight / float(totHeight)))
regionMeths.SetProportions(0.0, 1.0 * (methsHeight / float(totHeight)))
# Add regions to the shape
shape.AddRegion(regionName)
if attribsHeight: # Dont' make a region unless we have to
shape.AddRegion(regionAttribs)
if methsHeight: # Dont' make a region unless we have to
shape.AddRegion(regionMeths)
shape.SetSize(maxWidth + 10, totHeight + 10)
shape.SetCentreResize(
False
) # Specify whether the shape is to be resized from the centre (the centre stands still) or from the corner or side being dragged (the other corner or side stands still).
regionName.SetFormatMode(ogl.FORMAT_CENTRE_HORIZ)
shape.region1 = regionName # Andy added, for later external reference to classname from just having the shape instance.
shape.SetDraggable(True, True)
shape.SetCanvas(self)
shape.SetPen(
wx.BLACK_PEN) # Controls the color of the border of the shape
shape.SetBrush(wx.Brush("WHEAT", wx.SOLID))
setpos(shape, node.left, node.top)
self.GetDiagram().AddShape(
shape
) # self.AddShape is ok too, ShapeCanvas's AddShape is delegated back to Diagram's AddShape. ShapeCanvas-->Diagram
shape.Show(True)
evthandler = UmlShapeHandler(
self.log, self.frame, self
) # just init the handler with whatever will be convenient for it to know.
evthandler.SetShape(shape)
evthandler.SetPreviousHandler(shape.GetEventHandler())
shape.SetEventHandler(evthandler)
self.new_evthandler_housekeeping(evthandler)
shape.FlushText()
# Don't set the node left,top here as the shape needs to conform to the node.
# On the other hand the node needs to conform to the shape's width,height.
# ACTUALLY I now do set the pos of the shape, see above,
# just before the AddShape() call.
#
node.width, node.height = shape.GetBoundingBoxMax(
) # TODO: Shouldn't this be in node coords not world coords?
node.shape = shape
shape.node = node
return shape
def createNodeShape(self, node): # FROM SPRING LAYOUT
shape = ogl.RectangleShape(node.width, node.height)
shape.AddText(node.id)
setpos(shape, node.left, node.top)
#shape.SetDraggable(True, True)
self.AddShape(shape)
node.shape = shape
shape.node = node
# wire in the event handler for the new shape
evthandler = UmlShapeHandler(
None, self.frame, self
) # just init the handler with whatever will be convenient for it to know.
evthandler.SetShape(shape)
evthandler.SetPreviousHandler(shape.GetEventHandler())
shape.SetEventHandler(evthandler)
self.new_evthandler_housekeeping(evthandler)
def createCommentShape(self, node):
shape = ogl.TextShape(node.width, node.height)
shape.SetCanvas(self)
shape.SetPen(wx.BLACK_PEN)
shape.SetBrush(wx.LIGHT_GREY_BRUSH)
shape.SetBrush(wx.RED_BRUSH)
for line in node.comment.split('\n'):
shape.AddText(line)
setpos(shape, node.left, node.top)
#shape.SetDraggable(True, True)
self.AddShape(shape)
node.shape = shape
shape.node = node
# wire in the event handler for the new shape
evthandler = UmlShapeHandler(
None, self.frame, self
) # just init the handler with whatever will be convenient for it to know.
evthandler.SetShape(shape)
evthandler.SetPreviousHandler(shape.GetEventHandler())
shape.SetEventHandler(evthandler)
self.new_evthandler_housekeeping(evthandler)
def new_evthandler_housekeeping(self, evthandler):
# notify app of this new evthandler so app can
# assign the evthandler's .app attribute.
# Or could have just done:
# evthandler.app = self.app
# here. But we may need observer for other things later.
self.observers.NOTIFY_EVT_HANDLER_CREATED(evthandler)
def CreateUmlEdge(self, edge):
"""
@startuml
class ArrowHead {
_arrowType
__init__( type, end, size, xOffset, name, mf, arrowId)
}
class Shape {
SetCanvas()
SetPen()
SetBrush()
}
class LineShape <<lib.ogl._lines.py>> {
_from
_to
_arcArrows
AddArrow(arrowtype)
DrawArrow(self, dc, arrow, XOffset, proportionalOffset)
MakeLineControlPoints(2)
}
class LineShapeCustom <<src.gui.uml_lines.py>> {
DrawArrow(self, dc, arrow, XOffset, proportionalOffset)
}
Shape <|-- LineShape
LineShape <|-- LineShapeCustom
LineShape --> "0..*" ArrowHead : _arcArrows
note as N1
custom line drawing introduced
ARROW_UML_GENERALISATION
ARROW_UML_COMPOSITION
end note
N1 .. LineShapeCustom
@enduml
"""
from gui.uml_lines import LineShapeCustom, ARROW_UML_GENERALISATION, ARROW_UML_COMPOSITION
fromShape = edge['source'].shape
toShape = edge['target'].shape
edge_label = edge.get('uml_edge_type', '')
if edge_label == 'generalisation':
arrowtype = ARROW_UML_GENERALISATION # used to be ogl.ARROW_ARROW
elif edge_label == 'composition':
arrowtype = ARROW_UML_COMPOSITION # used to be ogl.ARROW_FILLED_CIRCLE
else:
arrowtype = None
line = LineShapeCustom() # used to be ogl.LineShape()
line.SetCanvas(self)
line.SetPen(wx.BLACK_PEN)
line.SetBrush(wx.BLACK_BRUSH)
if arrowtype:
line.AddArrow(arrowtype)
line.MakeLineControlPoints(2)
fromShape.AddLine(line, toShape)
self.GetDiagram().AddShape(line)
line.Show(True)
def OnWheelZoom(self, event):
#print "OnWheelZoom"
if self.working: return
self.working = True
SCROLL_AMOUNT = 40
if not event.ControlDown():
oldscrollx = self.GetScrollPos(wx.HORIZONTAL)
oldscrolly = self.GetScrollPos(wx.VERTICAL)
if event.GetWheelRotation() < 0:
self.Scroll(oldscrollx, oldscrolly + SCROLL_AMOUNT)
else:
self.Scroll(oldscrollx, max(0, oldscrolly - SCROLL_AMOUNT))
else:
if event.GetWheelRotation() < 0:
self.app.run.CmdLayoutContract(
remove_overlaps=not event.ShiftDown())
else:
self.app.run.CmdLayoutExpand(
remove_overlaps=not event.ShiftDown())
self.working = False
# UTILITY - called by CmdFileImportSource, CmdFileLoadWorkspaceBase.LoadGraph
def build_view(self, translatecoords=True):
if translatecoords:
self.AllToWorldCoords()
# Clear existing visualisation
for node in self.umlworkspace.graph.nodes:
if node.shape:
self.delete_shape_view(node.shape)
node.shape = None
# Create fresh visualisation
for node in self.umlworkspace.graph.nodes:
assert not node.shape
shape = self.CreateUmlShape(node)
self.umlworkspace.classnametoshape[
node.
id] = shape # Record the name to shape map so that we can wire up the links later.
for edge in self.umlworkspace.graph.edges:
self.CreateUmlEdge(edge)
# UTILITY - called by
#
#CmdInsertNewNodeClass, CmdInsertImage, CmdLayoutExpandContractBase,
#umlwin.OnWheelZoom_OverlapRemoval_Defunct,
#umlwin.layout_and_position_shapes,
#UmlShapeHandler.OnEndDragLeft
#UmlShapeHandler.OnSizingEndDragLeft
#LayoutBlackboard.LayoutLoopTillNoChange
#
def remove_overlaps(self, watch_removals=True):
"""
Returns T/F if any overlaps found, so caller can decide whether to
redraw the screen
"""
self.overlap_remover.RemoveOverlaps(watch_removals=watch_removals)
return self.overlap_remover.GetStats()['total_overlaps_found'] > 0
# UTILITY - called by everyone!!??
#
#CmdFileLoadWorkspaceBase, CmdInsertComment, CmdEditClass
#CmdLayoutExpandContractBase,
#CmdInsertNewNodeClass
#umlwin.NewEdgeMarkTo
#umlwin.OnWheelZoom_OverlapRemoval_Defunct
#LayoutBlackboard.LayoutThenPickBestScale
#LayoutBlackboard.Experiment1
#LayoutBlackboard.LayoutLoopTillNoChange
#LayoutBlackboard.ScaleUpMadly
#LayoutBlackboard.GetVitalStats (only if animate is true)
#OverlapRemoval.RemoveOverlaps ( refresh gui if self.gui and watch_removals)
#GraphSnapshotMgr.RestoreGraph
#
# these do an overlap removal first before calling here
#
#CmdInsertImage
#umlwin.layout_and_position_shapes,
#UmlShapeHandler.OnEndDragLeft
#UmlShapeHandler.OnSizingEndDragLeft
#
# recalibrate = True - called by core spring layout self.gui.stateofthenation()
#
# RENAME?: dc_DiagramClearAndRedraw
#
def stateofthenation(self, recalibrate=False, auto_resize_canvas=True):
if recalibrate: # was stateofthespring
self.coordmapper.Recalibrate()
self.AllToWorldCoords()
dc = wx.ClientDC(self)
self.PrepareDC(dc)
for node in self.umlworkspace.graph.nodes:
node.shape.Move2(dc, node.left, node.top, display=False)
self.Refresh()
self.Update(
) # or wx.SafeYield() # Without this the nodes don't paint during a "L" layout (edges do!?)
# You need to be yielding or updating on a regular basis, so that when your OS/window manager sends repaint messages to your app, it can handle them. See http://stackoverflow.com/questions/10825128/wxpython-how-to-force-ui-refresh
if auto_resize_canvas:
self.canvas_resizer.resize_virtual_canvas_tofit_bounds(
bounds_dirty=True)
# UTILITY - used by CmdLayout and CmdFileImportBase
def layout_and_position_shapes(self):
self.canvas_resizer.frame_calibration(
auto_resize_virtualcanvas=False
) # going to do a stateofthenation later so no point changing virt canvas now
self.AllToLayoutCoords()
self.layouter.layout(keep_current_positions=False, optimise=True)
self.AllToWorldCoords()
if self.remove_overlaps():
self.stateofthenation()
def get_umlboxshapes(self):
#return [s for s in self.GetDiagram().GetShapeList() if not isinstance(s, ogl.LineShape)]
return [
s for s in self.GetDiagram().GetShapeList()
if isinstance(s, DividedShape)
] # TODO take into account images and other shapes
umlboxshapes = property(get_umlboxshapes)
def OnDestroy(self, evt):
for shape in self.GetDiagram().GetShapeList():
if shape.GetParent() == None:
shape.SetCanvas(None)
def OnLeftClick(self, x, y, keys): # Override of ShapeCanvas method
# keys is a bit list of the following: KEY_SHIFT KEY_CTRL
self.app.run.CmdDeselectAllShapes()
class UmlCanvas(ogl.ShapeCanvas):
def __init__(self, parent, log, frame):
ogl.ShapeCanvas.__init__(self, parent)
self.observers = multicast()
self.app = None # assigned later by app boot
self.log = log
self.frame = frame
self.SetBackgroundColour("LIGHT BLUE")
self.SetDiagram(ogl.Diagram())
self.GetDiagram().SetCanvas(self)
wx.EVT_WINDOW_DESTROY(self, self.OnDestroy)
self.Bind(wx.EVT_MOUSEWHEEL, self.OnWheelZoom)
self.Bind(wx.EVT_KEY_DOWN, self.onKeyPress)
self.Bind(wx.EVT_CHAR, self.onKeyChar)
self.font1 = wx.Font(14, wx.MODERN, wx.NORMAL, wx.NORMAL, False)
self.font2 = wx.Font(10, wx.MODERN, wx.NORMAL, wx.NORMAL, False)
self.working = False
self._kill_layout = (
False
) # flag to communicate with layout engine. aborting keypress in gui should set this to true
@property
def kill_layout(self):
return self._kill_layout
@kill_layout.setter
def kill_layout(self, value):
self._kill_layout = value
def InitSizeAndObjs(self):
# Only call this once enclosing frame has been set up, so that get correct world coord dimensions
self.canvas_resizer = CanvasResizer(canvas=self)
assert (
not self.canvas_resizer.canvas_too_small()
), "InitSizeAndObjs being called too early - please set up enclosing frame size first"
self.umlworkspace = UmlWorkspace()
self.layout = LayoutBasic(
leftmargin=5, topmargin=5, verticalwhitespace=50, horizontalwhitespace=50, maxclassesperline=7
)
self.snapshot_mgr = GraphSnapshotMgr(graph=self.umlworkspace.graph, umlcanvas=self)
self.coordmapper = CoordinateMapper(self.umlworkspace.graph, self.GetSize())
self.layouter = GraphLayoutSpring(self.umlworkspace.graph, gui=self)
self.overlap_remover = OverlapRemoval(self.umlworkspace.graph, margin=50, gui=self)
def AllToLayoutCoords(self):
self.coordmapper.AllToLayoutCoords()
def AllToWorldCoords(self):
self.coordmapper.AllToWorldCoords()
def onKeyPress(self, event):
keycode = event.GetKeyCode() # http://www.wxpython.org/docs/api/wx.KeyEvent-class.html
if self.working:
event.Skip()
return
self.working = True
if keycode == wx.WXK_ESCAPE:
print "ESC key detected: Abort Layout"
self.kill_layout = True
if keycode == wx.WXK_RIGHT:
self.app.run.CmdLayoutExpand(remove_overlaps=not event.ShiftDown())
elif keycode == wx.WXK_LEFT:
self.app.run.CmdLayoutContract(remove_overlaps=not event.ShiftDown())
self.working = False
event.Skip()
def onKeyChar(self, event):
"""
These are secret keycodes not exposed on the menu
Normally shortcuts added on the menu work fine.
"""
if event.GetKeyCode() >= 256:
event.Skip()
return
if self.working:
event.Skip()
return
self.working = True
keycode = chr(event.GetKeyCode())
if keycode in ["q", "Q"]:
self.NewEdgeMarkFrom()
elif keycode in ["w", "W"]:
self.NewEdgeMarkTo(edge_type="composition")
elif keycode in ["e", "E"]:
self.NewEdgeMarkTo(edge_type="generalisation")
elif keycode in ["1", "2", "3", "4", "5", "6", "7", "8"]:
todisplay = ord(keycode) - ord("1")
self.snapshot_mgr.Restore(todisplay)
elif keycode == "P":
self.Refresh()
elif keycode in ["d", "D"]:
self.app.run.CmdDumpUmlWorkspace()
elif keycode == "s":
self.CmdTrimScrollbars()
elif keycode == "G": # and event.ShiftDown() and event.ControlDown():
self.app.run.CmdBuildColourChartWorkspace()
elif keycode in ["h", "H"]:
self.app.run.CmdColourSequential(color_range_offset=(keycode == "H"))
self.working = False
event.Skip()
def CmdTrimScrollbars(self):
self.canvas_resizer.resize_virtual_canvas_tofit_bounds(shrinkage_leeway=0, bounds_dirty=True)
def CmdRememberLayout1(self):
self.snapshot_mgr.QuickSave(slot=1)
def CmdRememberLayout2(self):
self.snapshot_mgr.QuickSave(slot=2)
def CmdRestoreLayout1(self):
self.snapshot_mgr.QuickRestore(slot=1)
def CmdRestoreLayout2(self):
self.snapshot_mgr.QuickRestore(slot=2)
def SelectNodeNow(self, shape):
canvas = shape.GetCanvas()
self.app.run.CmdDeselectAllShapes()
dc = wx.ClientDC(canvas)
canvas.PrepareDC(dc)
shape.Select(
True, dc
) # could pass None as dc if you don't want to trigger the OnDrawControlPoints(dc) handler immediately - e.g. if you want to do a complete redraw of everything later anyway
# change colour when select
# shape.SetBrush(wx.WHITE_BRUSH) #wx.Brush("WHEAT", wx.SOLID))
# canvas.Refresh(False) # works
# canvas.Redraw(dc) # works too
# shape.Draw(dc) # works too, most efficient
# canvas.Refresh(False) # t/f or don't use - doesn't seem to make a difference
# self.UpdateStatusBar(shape) # only available in the shape evt handler (this method used to live there...)
def delete_shape_view(self, shape):
# View
self.app.run.CmdDeselectAllShapes()
for line in shape.GetLines()[:]:
line.Delete()
shape.Delete()
def Clear(self):
print "Draw: Clear"
self.GetDiagram().DeleteAllShapes()
dc = wx.ClientDC(self)
self.GetDiagram().Clear(
dc
) # Clears screen - don't prepare the dc or it will only clear the top scrolled bit (see my mailing list discussion)
self.umlworkspace.Clear()
if "wxMac" in wx.PlatformInfo: # Hack on Mac so that onKeyChar bindings take hold properly.
wx.CallAfter(self.SetFocus)
elif "wxGTK" in wx.PlatformInfo: # Hack on Linux so that onKeyChar bindings take hold properly.
wx.CallLater(1500, self.app.context.wxapp.multiText.SetFocus)
wx.CallLater(1500, self.SetFocus)
def NewEdgeMarkFrom(self):
selected = [s for s in self.GetDiagram().GetShapeList() if s.Selected()]
if not selected:
print "Please select a node"
return
self.new_edge_from = selected[0].node
print "From", self.new_edge_from.id
def NewEdgeMarkTo(self, edge_type="composition"):
selected = [s for s in self.GetDiagram().GetShapeList() if s.Selected()]
if not selected:
print "Please select a node"
return
tonode = selected[0].node
print "To", tonode.id
if self.new_edge_from == None:
print "Please set from node first"
return
if self.new_edge_from.id == tonode.id:
print "Can't link to self"
return
if not self.umlworkspace.graph.FindNodeById(self.new_edge_from.id):
print "From node %s doesn't seem to be in graph anymore!" % self.new_edge_from.id
return
edge = self.umlworkspace.graph.AddEdge(
tonode, self.new_edge_from, weight=None
) # swap direction as is a directional composition.
# TODO should also arguably add to umlworkspace's associations_composition or associations_generalisation list (or create a new one for unlabelled associations like the one we are creating here)
# edge['uml_edge_type'] = ''
edge["uml_edge_type"] = edge_type
self.CreateUmlEdge(edge)
self.stateofthenation()
def CreateImageShape(self, F):
# shape = ogl.BitmapShape()
shape = BitmapShapeResizable()
img = wx.Image(F, wx.BITMAP_TYPE_ANY)
# adjusted_img = img.AdjustChannels(factor_red = 1., factor_green = 1., factor_blue = 1., factor_alpha = 0.5)
# adjusted_img = img.Rescale(10,10)
adjusted_img = img
bmp = wx.BitmapFromImage(adjusted_img)
shape.SetBitmap(bmp)
self.GetDiagram().AddShape(shape)
shape.Show(True)
evthandler = UmlShapeHandler(
self.log, self.frame, self
) # just init the handler with whatever will be convenient for it to know.
evthandler.SetShape(shape)
evthandler.SetPreviousHandler(shape.GetEventHandler())
shape.SetEventHandler(evthandler)
self.new_evthandler_housekeeping(evthandler)
setpos(shape, 0, 0)
# setpos(shape, node.left, node.top)
# node.width, node.height = shape.GetBoundingBoxMax()
# node.shape = shape
# shape.node = node
return shape
def CreateUmlShape(self, node):
def newRegion(font, name, textLst, maxWidth, totHeight=10):
# Taken from Boa, but put into the canvas class instead of the scrolled window class.
region = ogl.ShapeRegion()
if len(textLst) == 0:
return region, maxWidth, 0
dc = wx.ClientDC(self) # self is the canvas
dc.SetFont(font)
for text in textLst:
w, h = dc.GetTextExtent(text)
if w > maxWidth:
maxWidth = w
totHeight = totHeight + h + 0 # interline padding
region.SetFont(font)
region.SetText("\n".join(textLst))
region.SetName(name)
return region, maxWidth, totHeight
shape = DividedShape(width=99, height=98, canvas=self)
maxWidth = 10 # min node width, grows as we update it with text widths
"""
Future: Perhaps be able to show regions or not. Might need to totally
reconstruct the shape.
"""
# if not self.showAttributes: classAttrs = [' ']
# if not self.showMethods: classMeths = [' ']
# Create each region. If height returned is 0 this means don't create this region.
regionName, maxWidth, nameHeight = newRegion(self.font1, "class_name", [node.classname], maxWidth)
regionAttribs, maxWidth, attribsHeight = newRegion(self.font2, "attributes", node.attrs, maxWidth)
regionMeths, maxWidth, methsHeight = newRegion(self.font2, "methods", node.meths, maxWidth)
# Work out total height of shape
totHeight = nameHeight + attribsHeight + methsHeight
# Set regions to be a proportion of the total height of shape
regionName.SetProportions(0.0, 1.0 * (nameHeight / float(totHeight)))
regionAttribs.SetProportions(0.0, 1.0 * (attribsHeight / float(totHeight)))
regionMeths.SetProportions(0.0, 1.0 * (methsHeight / float(totHeight)))
# Add regions to the shape
shape.AddRegion(regionName)
if attribsHeight: # Dont' make a region unless we have to
shape.AddRegion(regionAttribs)
if methsHeight: # Dont' make a region unless we have to
shape.AddRegion(regionMeths)
shape.SetSize(maxWidth + 10, totHeight + 10)
shape.SetCentreResize(
False
) # Specify whether the shape is to be resized from the centre (the centre stands still) or from the corner or side being dragged (the other corner or side stands still).
regionName.SetFormatMode(ogl.FORMAT_CENTRE_HORIZ)
shape.region1 = (
regionName
) # Andy added, for later external reference to classname from just having the shape instance.
shape.SetDraggable(True, True)
shape.SetCanvas(self)
shape.SetPen(wx.BLACK_PEN) # Controls the color of the border of the shape
shape.SetBrush(wx.Brush("WHEAT", wx.SOLID))
setpos(shape, node.left, node.top)
self.GetDiagram().AddShape(
shape
) # self.AddShape is ok too, ShapeCanvas's AddShape is delegated back to Diagram's AddShape. ShapeCanvas-->Diagram
shape.Show(True)
evthandler = UmlShapeHandler(
self.log, self.frame, self
) # just init the handler with whatever will be convenient for it to know.
evthandler.SetShape(shape)
evthandler.SetPreviousHandler(shape.GetEventHandler())
shape.SetEventHandler(evthandler)
self.new_evthandler_housekeeping(evthandler)
shape.FlushText()
# Don't set the node left,top here as the shape needs to conform to the node.
# On the other hand the node needs to conform to the shape's width,height.
# ACTUALLY I now do set the pos of the shape, see above,
# just before the AddShape() call.
#
node.width, node.height = shape.GetBoundingBoxMax() # TODO: Shouldn't this be in node coords not world coords?
node.shape = shape
shape.node = node
return shape
def createNodeShape(self, node): # FROM SPRING LAYOUT
shape = ogl.RectangleShape(node.width, node.height)
shape.AddText(node.id)
setpos(shape, node.left, node.top)
# shape.SetDraggable(True, True)
self.AddShape(shape)
node.shape = shape
shape.node = node
# wire in the event handler for the new shape
evthandler = UmlShapeHandler(
None, self.frame, self
) # just init the handler with whatever will be convenient for it to know.
evthandler.SetShape(shape)
evthandler.SetPreviousHandler(shape.GetEventHandler())
shape.SetEventHandler(evthandler)
self.new_evthandler_housekeeping(evthandler)
def createCommentShape(self, node):
shape = ogl.TextShape(node.width, node.height)
shape.SetCanvas(self)
shape.SetPen(wx.BLACK_PEN)
shape.SetBrush(wx.LIGHT_GREY_BRUSH)
shape.SetBrush(wx.RED_BRUSH)
for line in node.comment.split("\n"):
shape.AddText(line)
setpos(shape, node.left, node.top)
# shape.SetDraggable(True, True)
self.AddShape(shape)
node.shape = shape
shape.node = node
# wire in the event handler for the new shape
evthandler = UmlShapeHandler(
None, self.frame, self
) # just init the handler with whatever will be convenient for it to know.
evthandler.SetShape(shape)
evthandler.SetPreviousHandler(shape.GetEventHandler())
shape.SetEventHandler(evthandler)
self.new_evthandler_housekeeping(evthandler)
def new_evthandler_housekeeping(self, evthandler):
# notify app of this new evthandler so app can
# assign the evthandler's .app attribute.
# Or could have just done:
# evthandler.app = self.app
# here. But we may need observer for other things later.
self.observers.NOTIFY_EVT_HANDLER_CREATED(evthandler)
def CreateUmlEdge(self, edge):
fromShape = edge["source"].shape
toShape = edge["target"].shape
edge_label = edge.get("uml_edge_type", "")
if edge_label == "generalisation":
arrowtype = ogl.ARROW_ARROW
elif edge_label == "composition":
arrowtype = ogl.ARROW_FILLED_CIRCLE
else:
arrowtype = None
line = ogl.LineShape()
line.SetCanvas(self)
line.SetPen(wx.BLACK_PEN)
line.SetBrush(wx.BLACK_BRUSH)
if arrowtype:
line.AddArrow(arrowtype)
line.MakeLineControlPoints(2)
fromShape.AddLine(line, toShape)
self.GetDiagram().AddShape(line)
line.Show(True)
def OnWheelZoom(self, event):
# print "OnWheelZoom"
if self.working:
return
self.working = True
SCROLL_AMOUNT = 40
if not event.ControlDown():
oldscrollx = self.GetScrollPos(wx.HORIZONTAL)
oldscrolly = self.GetScrollPos(wx.VERTICAL)
if event.GetWheelRotation() < 0:
self.Scroll(oldscrollx, oldscrolly + SCROLL_AMOUNT)
else:
self.Scroll(oldscrollx, max(0, oldscrolly - SCROLL_AMOUNT))
else:
if event.GetWheelRotation() < 0:
self.app.run.CmdLayoutContract(remove_overlaps=not event.ShiftDown())
else:
self.app.run.CmdLayoutExpand(remove_overlaps=not event.ShiftDown())
self.working = False
# UTILITY - called by CmdFileImportSource, CmdFileLoadWorkspaceBase.LoadGraph
def build_view(self, translatecoords=True):
if translatecoords:
self.AllToWorldCoords()
# Clear existing visualisation
for node in self.umlworkspace.graph.nodes:
if node.shape:
self.delete_shape_view(node.shape)
node.shape = None
# Create fresh visualisation
for node in self.umlworkspace.graph.nodes:
assert not node.shape
shape = self.CreateUmlShape(node)
self.umlworkspace.classnametoshape[
node.id
] = shape # Record the name to shape map so that we can wire up the links later.
for edge in self.umlworkspace.graph.edges:
self.CreateUmlEdge(edge)
# UTILITY - called by
#
# CmdInsertNewNodeClass, CmdInsertImage, CmdLayoutExpandContractBase,
# umlwin.OnWheelZoom_OverlapRemoval_Defunct,
# umlwin.layout_and_position_shapes,
# UmlShapeHandler.OnEndDragLeft
# UmlShapeHandler.OnSizingEndDragLeft
# LayoutBlackboard.LayoutLoopTillNoChange
#
def remove_overlaps(self, watch_removals=True):
"""
Returns T/F if any overlaps found, so caller can decide whether to
redraw the screen
"""
self.overlap_remover.RemoveOverlaps(watch_removals=watch_removals)
return self.overlap_remover.GetStats()["total_overlaps_found"] > 0
# UTILITY - called by everyone!!??
#
# CmdFileLoadWorkspaceBase, CmdInsertComment, CmdEditClass
# CmdLayoutExpandContractBase,
# CmdInsertNewNodeClass
# umlwin.NewEdgeMarkTo
# umlwin.OnWheelZoom_OverlapRemoval_Defunct
# LayoutBlackboard.LayoutThenPickBestScale
# LayoutBlackboard.Experiment1
# LayoutBlackboard.LayoutLoopTillNoChange
# LayoutBlackboard.ScaleUpMadly
# LayoutBlackboard.GetVitalStats (only if animate is true)
# OverlapRemoval.RemoveOverlaps ( refresh gui if self.gui and watch_removals)
# GraphSnapshotMgr.RestoreGraph
#
# these do an overlap removal first before calling here
#
# CmdInsertImage
# umlwin.layout_and_position_shapes,
# UmlShapeHandler.OnEndDragLeft
# UmlShapeHandler.OnSizingEndDragLeft
#
# recalibrate = True - called by core spring layout self.gui.stateofthenation()
#
# RENAME?: dc_DiagramClearAndRedraw
#
def stateofthenation(self, recalibrate=False, auto_resize_canvas=True):
if recalibrate: # was stateofthespring
self.coordmapper.Recalibrate()
self.AllToWorldCoords()
dc = wx.ClientDC(self)
self.PrepareDC(dc)
for node in self.umlworkspace.graph.nodes:
node.shape.Move2(dc, node.left, node.top, display=False)
self.Refresh()
self.Update() # or wx.SafeYield() # Without this the nodes don't paint during a "L" layout (edges do!?)
# You need to be yielding or updating on a regular basis, so that when your OS/window manager sends repaint messages to your app, it can handle them. See http://stackoverflow.com/questions/10825128/wxpython-how-to-force-ui-refresh
if auto_resize_canvas:
self.canvas_resizer.resize_virtual_canvas_tofit_bounds(bounds_dirty=True)
# UTILITY - used by CmdLayout and CmdFileImportBase
def layout_and_position_shapes(self):
self.canvas_resizer.frame_calibration(
auto_resize_virtualcanvas=False
) # going to do a stateofthenation later so no point changing virt canvas now
self.AllToLayoutCoords()
self.layouter.layout(keep_current_positions=False, optimise=True)
self.AllToWorldCoords()
if self.remove_overlaps():
self.stateofthenation()
def get_umlboxshapes(self):
# return [s for s in self.GetDiagram().GetShapeList() if not isinstance(s, ogl.LineShape)]
return [
s for s in self.GetDiagram().GetShapeList() if isinstance(s, DividedShape)
] # TODO take into account images and other shapes
umlboxshapes = property(get_umlboxshapes)
def OnDestroy(self, evt):
for shape in self.GetDiagram().GetShapeList():
if shape.GetParent() == None:
shape.SetCanvas(None)
def OnLeftClick(self, x, y, keys): # Override of ShapeCanvas method
# keys is a bit list of the following: KEY_SHIFT KEY_CTRL
self.app.run.CmdDeselectAllShapes()
