def create_config(self, config_file, path=None):
# config file must be JSON file
config_name = config_file.replace(".json", "")
if path:
config_file = f"{path}/{config_file}"
with open(config_file, "r") as fp:
data = json.load(fp)
contents = "\n".join(
[f"testvar {k}\t\t{v}" for k, v in data.items()])
# create config based on filename
cfg = self.configs.create(Config(name=config_name, contents=contents))
return cfg
def runTest(self):
if 'cdrouter_server' in self.config.board:
self.cdrouter_server = self.config.board['cdrouter_server']
elif self.config.cdrouter_server is not None:
self.cdrouter_server = self.config.cdrouter_server
if 'cdrouter_wan_iface' in self.config.board:
self.cdrouter_wan_iface = self.config.board['cdrouter_wan_iface']
else:
self.cdrouter_wan_iface = self.config.cdrouter_wan_iface
if 'cdrouter_lan_iface' in self.config.board:
self.cdrouter_lan_iface = self.config.board['cdrouter_lan_iface']
else:
self.cdrouter_lan_iface = self.config.cdrouter_lan_iface
if self.tests is None:
self.skipTest("No tests defined!")
if self.cdrouter_server is None:
self.skipTest("No cdrouter server specified")
lan.sendline('ifconfig %s down' % lan.iface_dut)
lan.expect(prompt)
if not board.has_cmts:
wan.sendline('ifconfig %s down' % wan.iface_dut)
wan.expect(prompt)
c = CDRouter(self.cdrouter_server)
try:
board.sendcontrol('c')
board.expect(prompt)
board.sendline('reboot')
board.expect('reboot: Restarting system')
except:
board.reset()
board.wait_for_linux()
board.wait_for_network()
# Add extra board specific delay
board.expect(pexpect.TIMEOUT,
timeout=getattr(board, 'cdrouter_bootdelay', 0))
# If alt mac addr is specified in config, use that..
# CMTS = we route so no wan mac is used
# if we route, we need to add routes
wandutmac = None
if board.has_cmts and wan.wan_cmts_provisioner:
# TODO: there are more missing ones CDrouter expects
wan.sendline('ip route add 200.0.0.0/8 via 192.168.3.2')
wan.expect(prompt)
elif not wan.static_ip:
for device in self.config.board['devices']:
if device['name'] == 'wan':
if 'alt_macaddr' in device:
wandutmac = device['alt_macaddr']
break
# Otherwise grab this from the device interface
if wandutmac is None:
board.sendline('ifconfig %s' % board.wan_iface)
board.expect('([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})')
wandutmac = board.match.group()
board.expect(prompt)
print("Using %s for WAN mac address" % wandutmac)
lan.vlan = wan.vlan = 0
for device in self.config.board['devices']:
d = None
if device['name'] == 'wan':
d = wan
elif device['name'] == 'lan':
d = lan
else:
continue
if d is not None:
d.vlan = getattr(device, 'vlan', 0)
if d.vlan == 0:
d.sendline('cat /proc/net/vlan/config')
d.expect_exact('cat /proc/net/vlan/config')
if 0 == d.expect(
[pexpect.TIMEOUT,
'%s.*\|\s([0-9]+).*\|' % d.iface_dut],
timeout=5):
d.vlan = 0
else:
d.vlan = d.match.group(1)
d.expect(prompt)
print("Using %s for WAN vlan" % wan.vlan)
print("Using %s for LAN vlan" % lan.vlan)
# TODO: move wan and lan interface to bft config?
contents = """
testvar wanInterface """ + self.cdrouter_wan_iface
if wandutmac is not None:
contents = contents + """
testvar wanDutMac """ + wandutmac
if wan.vlan != 0:
contents = contents + """
testvar wanVlanId """ + wan.vlan
contents = contents + """
testvar lanInterface """ + self.cdrouter_lan_iface
if lan.vlan != 0:
contents = contents + """
testvar lanVlanId """ + lan.vlan
def add_cdrouter_config(config):
cdr_conf = None
# TODO: make a generic helper to search path and overlays
if os.path.isfile(config):
cdr_conf = open(config, 'r').readlines()
elif 'BFT_OVERLAY' in os.environ:
for p in os.environ['BFT_OVERLAY'].split(' '):
p = os.path.realpath(p)
try:
cdr_conf = open(os.path.join(p, config),
'r').readlines()
except:
continue
else:
break
return "\n" + "".join(cdr_conf)
# Take config from overall config, but fallback to board config
if self.config.cdrouter_config is not None:
contents = contents + add_cdrouter_config(
self.config.cdrouter_config)
elif board.cdrouter_config is not None:
contents = contents + add_cdrouter_config(board.cdrouter_config)
if self.extra_config:
contents = contents + "\n" + self.extra_config.replace(',', '\n')
if board.has_cmts:
for i in range(5):
try:
wan_ip = board.get_interface_ipaddr(board.erouter_iface)
except:
board.expect(pexpect.TIMEOUT, timeout=15)
continue
else:
if i == 4:
raise Exception("Failed to get erouter ip address")
break
# TODO: mask from config? wanNatIp vs. wanIspAssignGateway?
contents=contents + """
testvar wanMode static
testvar wanIspIp %s
testvar wanIspGateway %s
testvar wanIspMask 255.255.255.0
testvar wanIspAssignIp %s
testvar wanNatIp %s
testvar IPv4HopCount %s
testvar lanDnsServer %s
testvar wanDnsServer %s""" % (self.config.board['cdrouter_wanispip'], \
self.config.board['cdrouter_wanispgateway'], \
wan_ip, wan_ip, \
self.config.board['cdrouter_ipv4hopcount'], \
board.get_dns_server(), \
board.get_dns_server_upstream())
print("Using below for config:")
print(contents)
print("#######################")
config_name = "bft-automated-job-%s" % str(time.time()).replace(
'.', '')
cfg = c.configs.create(Config(name=config_name, contents=contents))
p = c.packages.create(
Package(name=config_name, testlist=self.tests, config_id=cfg.id))
self.start_time = time.time()
j = c.jobs.launch(Job(package_id=p.id))
while j.result_id is None:
if (time.time() - self.start_time) > 300:
# delete job if it fails to start
c.jobs.delete(j.id)
raise Exception("Failed to start CDrouter job")
board.expect(pexpect.TIMEOUT, timeout=1)
j = c.jobs.get(j.id)
print('Job Result-ID: {0}'.format(j.result_id))
self.job_id = j.result_id
self.results = c.results
unpaused = False
end_of_start = False
no_more_pausing = False
while True:
r = c.results.get(j.result_id)
print(r.status)
# we are ready to go from boardfarm reset above
if r.status == "paused" and unpaused == False:
c.results.unpause(j.result_id)
unpaused = True
board.expect(pexpect.TIMEOUT, timeout=1)
c.results.pause(j.result_id, when="end-of-test")
end_of_start = True
continue
if r.status == "paused" and end_of_start == True:
end_of_start = False
# TODO: do we need this anymore? we have board specific cdrouter_bootdelay
board.expect(pexpect.TIMEOUT, timeout=60)
c.results.unpause(j.result_id)
board.expect(pexpect.TIMEOUT, timeout=1)
no_more_pausing = True
continue
if no_more_pausing and r.status == "paused":
print("Error: test is still paused")
c.results.stop(j.result_id)
break
if r.status != "running" and r.status != "paused":
break
board.expect(pexpect.TIMEOUT, timeout=5)
print(r.result)
self.result_message = r.result.encode('ascii', 'ignore')
# TODO: results URL?
elapsed_time = time.time() - self.start_time
print("Test took %s" %
time.strftime("%H:%M:%S", time.gmtime(elapsed_time)))
summary = c.results.summary_stats(j.result_id)
self.result_message += " (Failed= %s, Passed = %s, Skipped = %s)" \
% (summary.result_breakdown.failed, \
summary.result_breakdown.passed, \
summary.result_breakdown.skipped)
for test in summary.test_summaries:
self.logged[test.name] = vars(test)
if str(test.name) not in ["start", "final"]:
from lib.common import TestResult
try:
grade_map = {
"pass": "******",
"fail": "FAIL",
"skip": "SKIP"
}[test.result]
tr = TestResult(test.name, grade_map, test.description)
if test.started is not None:
tr.start_time = test.started
tr.stop_time = test.started + test.duration
else:
tr.elapsed_time = test.duration
self.subtests.append(tr)
except:
continue
# TODO: handle skipped tests
try:
metric = c.results.get(result_id, test.name, "bandwidth")
print(vars(metric))
# TODO: decide how to export data to kibana
except:
# Not all tests have this metric, no other way?
pass
assert (r.result == "The package completed successfully")
self.recover()
def runTest(self):
board = self.dev.board
wan = self.dev.wan
lan = self.dev.lan
from boardfarm.devices import cdrouter
self.cdrouter_server = "http://" + cdrouter.ipaddr
self.cdrouter_wan_iface = cdrouter.wan_iface
self.cdrouter_lan_iface = cdrouter.lan_iface
if self.tests is None:
self.skipTest("No tests defined!")
if self.cdrouter_server is None:
self.skipTest("No cdrouter server specified")
lan.sendline('ifconfig %s down' % lan.iface_dut)
lan.expect(prompt)
if not board.has_cmts:
wan.sendline('ifconfig %s down' % wan.iface_dut)
wan.expect(prompt)
c = CDRouter(self.cdrouter_server)
wandutmac = None
if board.has_cmts:
provisioner = self.dev.provisioner
# TODO: there are more missing ones CDrouter expects
provisioner.sendline('ip route add 200.0.0.0/8 via 192.168.3.2')
provisioner.expect(prompt)
provisioner.sendline('ip route add 3.3.3.3 via 192.168.3.2')
provisioner.expect(prompt)
provisioner.sendline(
'ip route add 3001:cafe:1::/64 via 2001:dead:beef:1::2')
provisioner.expect(prompt)
provisioner.sendline(
'ip route add 3001:51a:cafe::1 via 2001:dead:beef:1::2')
provisioner.expect(prompt)
elif not wan.static_ip:
for device in self.config.board['devices']:
if device['name'] == 'wan':
if 'alt_macaddr' in device:
wandutmac = device['alt_macaddr']
break
# Otherwise grab this from the device interface
if wandutmac is None:
board.sendline('ifconfig %s' % board.wan_iface)
board.expect('([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})')
wandutmac = board.match.group()
board.expect(prompt)
print("Using %s for WAN mac address" % wandutmac)
lan.vlan = wan.vlan = 0
for device in self.config.board['devices']:
d = None
if device['name'] == 'wan':
d = wan
elif device['name'] == 'lan':
d = lan
else:
continue
if d is not None:
d.vlan = getattr(device, 'vlan', 0)
if d.vlan == 0:
d.sendline('cat /proc/net/vlan/config')
d.expect_exact('cat /proc/net/vlan/config')
if 0 == d.expect(
[pexpect.TIMEOUT,
'%s.*\|\s([0-9]+).*\|' % d.iface_dut],
timeout=5):
d.vlan = 0
else:
d.vlan = d.match.group(1)
d.expect(prompt)
# TODO - WIP
wan.vlan = "136"
print("Using %s for WAN vlan" % wan.vlan)
print("Using %s for LAN vlan" % lan.vlan)
# TODO: move wan and lan interface to bft config?
contents = """
testvar wanInterface """ + self.cdrouter_wan_iface
if wandutmac is not None:
contents = contents + """
testvar wanDutMac """ + wandutmac
if wan.vlan != 0:
contents = contents + """
testvar wanVlanId """ + wan.vlan
contents = contents + """
testvar lanInterface """ + self.cdrouter_lan_iface
if lan.vlan != 0:
contents = contents + """
testvar lanVlanId """ + lan.vlan
if self.extra_config:
contents = contents + "\n" + self.extra_config.replace(',', '\n')
def add_cdrouter_config(config):
p = os.path.realpath(config)
cdr_conf = open(os.path.join(p, config), 'r').readlines()
return "\n" + "".join(cdr_conf)
if board.cdrouter_config is not None:
contents = contents + add_cdrouter_config(board.cdrouter_config)
if board.has_cmts:
for i in range(5):
exp = None
try:
wan_ip = board.get_interface_ipaddr(board.erouter_iface)
# TODO: this breaks ipv6 only
wan_ip6 = board.get_interface_ip6addr(board.erouter_iface)
lan.start_lan_client()
lan_ip6 = lan.get_interface_ip6addr(lan.iface_dut)
ip6 = ipaddress.IPv6Network(six.text_type(lan_ip6))
fixed_prefix6 = str(
ip6.supernet(new_prefix=64).network_address)
break
except Exception as e:
exp = e
board.expect(pexpect.TIMEOUT, timeout=15)
continue
else:
if i == 4:
raise exp
# TODO: mask from config? wanNatIp vs. wanIspAssignGateway?
contents=contents + """
testvar ipv6LanIp %s%%eui64%%
testvar ipv6LanPrefixLen 64
testvar healthCheckEnable yes
testvar supportsIPv6 yes
testvar ipv6WanMode static
testvar ipv6WanIspIp %s
testvar ipv6WanIspGateway %s
testvar ipv6WanIspAssignIp %s
testvar ipv6WanIspPrefixLen 64
testvar ipv6LanMode autoconf
testvar ipv6RemoteHost 3001:51a:cafe::1
testvar ipv6FreeNetworkStart 3001:cafe:1::
testvar ipv6FreeNetworkEnd 3001:cafe:ffff::
testvar ipv6FreeNetworkPrefixLen 64
testvar wanMode static
testvar wanIspIp %s
testvar wanIspGateway %s
testvar wanIspMask 255.255.255.128
testvar wanIspAssignIp %s
testvar wanNatIp %s
testvar remoteHostIp 3.3.3.3
testvar FreeNetworkStart 200.0.0.0
testvar FreeNetworkMask 255.255.255.0
testvar FreeNetworkStop 201.0.0.0
testvar IPv4HopCount %s
testvar lanDnsServer %s
testvar wanDnsServer %s
""" % (fixed_prefix6,
cdrouter.wanispip_v6, \
cdrouter.wanispgateway_v6, \
wan_ip6, \
cdrouter.wanispip, \
cdrouter.wanispgateway, \
wan_ip, wan_ip, \
cdrouter.ipv4hopcount, \
board.get_dns_server(), \
board.get_dns_server_upstream())
print("Using below for config:")
print(contents)
print("#######################")
config_name = "bft-automated-job-%s" % str(time.time()).replace(
'.', '')
cfg = c.configs.create(Config(name=config_name, contents=contents))
p = c.packages.create(
Package(name=config_name, testlist=self.tests, config_id=cfg.id))
self.start_time = time.time()
j = c.jobs.launch(Job(package_id=p.id))
while j.result_id is None:
if (time.time() - self.start_time) > 300:
# delete job if it fails to start
c.jobs.delete(j.id)
raise Exception("Failed to start CDrouter job")
board.expect(pexpect.TIMEOUT, timeout=1)
j = c.jobs.get(j.id)
print('Job Result-ID: {0}'.format(j.result_id))
self.job_id = j.result_id
self.results = c.results
unpaused = False
end_of_start = False
no_more_pausing = False
while True:
r = c.results.get(j.result_id)
print(r.status)
# we are ready to go from boardfarm reset above
if r.status == "paused" and unpaused == False:
c.results.unpause(j.result_id)
unpaused = True
board.expect(pexpect.TIMEOUT, timeout=1)
c.results.pause(j.result_id, when="end-of-test")
end_of_start = True
continue
if r.status == "paused" and end_of_start == True:
end_of_start = False
# TODO: do we need this anymore? we have board specific cdrouter_bootdelay
board.expect(pexpect.TIMEOUT, timeout=60)
c.results.unpause(j.result_id)
board.expect(pexpect.TIMEOUT, timeout=1)
no_more_pausing = True
continue
if no_more_pausing and r.status == "paused":
print("Error: test is still paused")
c.results.stop(j.result_id)
break
if r.status != "running" and r.status != "paused":
break
board.expect(pexpect.TIMEOUT, timeout=5)
print(r.result)
self.result_message = r.result.encode('ascii', 'ignore')
# TODO: results URL?
elapsed_time = time.time() - self.start_time
print("Test took %s" %
time.strftime("%H:%M:%S", time.gmtime(elapsed_time)))
summary = c.results.summary_stats(j.result_id)
self.result_message = six.text_type(self.result_message) + \
" (Failed= %s, Passed = %s, Skipped = %s)" \
% (summary.result_breakdown.failed, \
summary.result_breakdown.passed, \
summary.result_breakdown.skipped)
for test in summary.test_summaries:
self.logged[test.name] = vars(test)
if str(test.name) not in ["start", "final"]:
try:
grade_map = {
"pass": "******",
"fail": "FAIL",
"skip": "SKIP"
}[test.result]
tr = TestResult(test.name, grade_map, test.description)
if test.started is not None:
tr.start_time = test.started
tr.stop_time = test.started + test.duration
else:
tr.elapsed_time = test.duration
self.subtests.append(tr)
except:
continue
# TODO: handle skipped tests
try:
metric = c.results.get(j.result_id, test.name, "bandwidth")
print(vars(metric))
# TODO: decide how to export data to kibana
except:
# Not all tests have this metric, no other way?
pass
assert (r.result == "The package completed successfully")
self.recover()
def runTest(self):
if 'cdrouter_server' in self.config.board:
self.cdrouter_server = self.config.board['cdrouter_server']
elif self.config.cdrouter_server is not None:
self.cdrouter_server = self.config.cdrouter_server
if self.tests is None:
self.skipTest("No tests defined!")
if self.cdrouter_server is None:
self.skipTest("No cdrouter server specified")
for d in [wan, lan]:
d.sendline('ifconfig eth1 down')
d.expect(prompt)
board.sendcontrol('c')
board.expect(prompt)
# TODO: make host configurable in bft config?
c = CDRouter(self.cdrouter_server)
# If alt mac addr is specified in config, use that..
# This is used when a CMTS for example is placed between
# the device under test and the WAN
wandutmac = None
for device in self.config.board['devices']:
if device['name'] == 'wan':
if 'alt_macaddr' in device:
wandutmac = device['alt_macaddr']
break
# Otherwise grab this from the device interface
if wandutmac is None:
board.sendline('ifconfig %s' % board.wan_iface)
board.expect('([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})')
wandutmac = board.match.group()
board.expect(prompt)
print("Using %s for WAN mac address" % wandutmac)
lan.vlan = wan.vlan = 0
for device in self.config.board['devices']:
d = None
if device['name'] == 'wan':
d = wan
elif device['name'] == 'lan':
d = lan
if d is not None:
d.vlan = getattr(device, 'vlan', 0)
if d.vlan == 0:
d.sendline('cat /proc/net/vlan/config')
d.expect('eth1.*\|\s([0-9]+).*\|')
d.vlan = d.match.group(1)
d.expect(prompt)
print("Using %s for WAN vlan" % wan.vlan)
print("Using %s for LAN vlan" % lan.vlan)
# TODO: move wan and lan interface to bft config?
contents = """
testvar wanInterface """ + self.config.cdrouter_wan_iface
contents = contents + """
testvar wanDutMac """ + wandutmac
if wan.vlan != 0:
contents = contents + """
testvar wanVlanId """ + wan.vlan
contents = contents + """
testvar lanInterface """ + self.config.cdrouter_lan_iface
if lan.vlan != 0:
contents = contents + """
testvar lanVlanId """ + lan.vlan
if self.config.cdrouter_config is not None:
contents = contents + "\n" + "".join(
open(self.config.cdrouter_config, 'r').readlines())
if self.extra_config:
contents = contents + "\n" + self.extra_config.replace(',', '\n')
print("Using below for config:")
print(contents)
print("#######################")
config_name = "bft-automated-job-%s" % str(time.time()).replace(
'.', '')
cfg = c.configs.create(Config(name=config_name, contents=contents))
p = c.packages.create(
Package(name=config_name, testlist=self.tests, config_id=cfg.id))
try:
board.sendline('reboot')
board.expect('reboot: Restarting system')
except:
board.reset()
self.start_time = time.time()
j = c.jobs.launch(Job(package_id=p.id))
while j.result_id is None:
if (time.time() - self.start_time) > 300:
# delete job if it fails to start
c.jobs.delete(j.id)
raise Exception("Failed to start CDrouter job")
board.expect(pexpect.TIMEOUT, timeout=1)
j = c.jobs.get(j.id)
print('Job Result-ID: {0}'.format(j.result_id))
self.job_id = j.result_id
self.results = c.results
unpaused = False
end_of_start = False
no_more_pausing = False
while True:
r = c.results.get(j.result_id)
print(r.status)
# we are ready to go from boardfarm reset above
if r.status == "paused" and unpaused == False:
c.results.unpause(j.result_id)
unpaused = True
board.expect(pexpect.TIMEOUT, timeout=1)
c.results.pause(j.result_id, when="end-of-test")
end_of_start = True
continue
if r.status == "paused" and end_of_start == True:
end_of_start = False
# TODO: make this board specific?
board.expect(pexpect.TIMEOUT, timeout=60)
c.results.unpause(j.result_id)
board.expect(pexpect.TIMEOUT, timeout=1)
no_more_pausing = True
continue
if no_more_pausing and r.status == "paused":
print("Error: test is still paused")
c.results.stop(j.result_id)
break
if r.status != "running" and r.status != "paused":
break
board.expect(pexpect.TIMEOUT, timeout=5)
print(r.result)
self.result_message = r.result.encode('ascii', 'ignore')
# TODO: results URL?
elapsed_time = time.time() - self.start_time
print("Test took %s" %
time.strftime("%H:%M:%S", time.gmtime(elapsed_time)))
summary = c.results.summary_stats(j.result_id)
self.result_message += " (Failed= %s, Passed = %s, Skipped = %s)" \
% (summary.result_breakdown.failed, \
summary.result_breakdown.passed, \
summary.result_breakdown.skipped)
for test in summary.test_summaries:
self.logged[test.name] = vars(test)
if str(test.name) not in ["start", "final"]:
from lib.common import TestResult
try:
grade_map = {
"pass": "******",
"fail": "FAIL",
"skip": "SKIP"
}[test.result]
tr = TestResult(test.name, grade_map, test.description)
if test.started is not None:
tr.start_time = test.started
tr.stop_time = test.started + test.duration
else:
tr.elapsed_time = test.duration
self.subtests.append(tr)
except:
continue
# TODO: handle skipped tests
try:
metric = c.results.get(result_id, test.name, "bandwidth")
print vars(metric)
# TODO: decide how to export data to kibana
except:
# Not all tests have this metric, no other way?
pass
assert (r.result == "The package completed successfully")
self.recover()
#!/usr/bin/env python
import sys
from cdrouter import CDRouter
from cdrouter.configs import Config
if len(sys.argv) < 3:
print('usage: <base_url> <token>')
sys.exit(1)
base = sys.argv[1]
token = sys.argv[2]
# create service
c = CDRouter(base, token=token)
cfg = c.configs.create(
Config(name='My Config File',
contents="""
testvar lanIp 192.168.1.1
testvar lanMask 255.255.255.0
"""))
print('New config has ID {}'.format(cfg.id))