def __init__(self):
super(AVRProgrammerDialog, self).__init__(CWMainGUI.getInstance())
# self.setWindowFlags(self.windowFlags() | Qt.WindowStaysOnTopHint)
self.avr = AVRProgrammer()
self.setWindowTitle("ChipWhisperer-Lite AVR Programmer")
layout = QVBoxLayout()
layoutFW = QHBoxLayout()
self.flashLocation = QtFixes.QLineEdit()
flashFileButton = QPushButton("Find")
flashFileButton.clicked.connect(self.findFlash)
layoutFW.addWidget(QLabel("FLASH File"))
layoutFW.addWidget(self.flashLocation)
layoutFW.addWidget(flashFileButton)
layout.addLayout(layoutFW)
self.flashLocation.setText(QSettings().value("avr-flash-location"))
# Add buttons
readSigBut = QPushButton("Check Signature")
readSigBut.clicked.connect(self.readSignature)
verifyFlashBut = QPushButton("Verify FLASH")
verifyFlashBut.clicked.connect(self.verifyFlash)
verifyFlashBut.setEnabled(False)
progFlashBut = QPushButton("Erase/Program/Verify FLASH")
progFlashBut.clicked.connect(self.writeFlash)
layoutBut = QHBoxLayout()
layoutBut.addWidget(readSigBut)
layoutBut.addWidget(verifyFlashBut)
layoutBut.addWidget(progFlashBut)
layout.addLayout(layoutBut)
layoutFuse = QHBoxLayout()
readFuseBut = QPushButton("Read Fuses")
readFuseBut.clicked.connect(self.readFuses)
writeFuseBut = QPushButton("Write Fuses")
writeFuseBut.clicked.connect(self.writeFuses)
self.lowfuseLine = QtFixes.QLineEdit("?")
self.lowfuseLine.setMaxLength(2)
self.lowfuseLine.setFixedWidth(25)
self.highfuseLine = QtFixes.QLineEdit("?")
self.highfuseLine.setMaxLength(2)
self.highfuseLine.setFixedWidth(25)
self.extfuseLine = QtFixes.QLineEdit("?")
self.extfuseLine.setMaxLength(2)
self.extfuseLine.setFixedWidth(25)
# Don't allow use to change these fuses
self.highfuseLine.setReadOnly(True)
self.extfuseLine.setReadOnly(True)
layoutFuse.addWidget(readFuseBut)
layoutFuse.addWidget(QLabel("LOW:"))
layoutFuse.addWidget(self.lowfuseLine)
layoutFuse.addWidget(QLabel("HIGH:"))
layoutFuse.addWidget(self.highfuseLine)
layoutFuse.addWidget(QLabel("EXT:"))
layoutFuse.addWidget(self.extfuseLine)
layoutFuse.addWidget(writeFuseBut)
layout.addLayout(layoutFuse)
layoutExtra = QHBoxLayout()
self.clockMode = QPushButton("Enable Slow Clock Mode")
self.clockMode.setCheckable(True)
self.clockMode.clicked.connect(self.toggleSlowClock)
layoutExtra.addWidget(self.clockMode)
layoutExtra.addStretch()
layout.addLayout(layoutExtra)
# Add status stuff
self.statusLine = QPlainTextEdit()
self.statusLine.setReadOnly(True)
# self.statusLine.setFixedHeight(QFontMetrics(self.statusLine.font()).lineSpacing() * 5 + 10)
layout.addWidget(self.statusLine)
self.avr.newTextLog.connect(self.append)
# Set dialog layout
self.setLayout(layout)
def __init__(self):
super(AVRProgrammerDialog, self).__init__(CWMainGUI.getInstance())
# self.setWindowFlags(self.windowFlags() | Qt.WindowStaysOnTopHint)
self.avr = AVRProgrammer()
self.setWindowTitle("ChipWhisperer-Lite AVR Programmer")
layout = QVBoxLayout()
layoutFW = QHBoxLayout()
self.flashLocation = QtFixes.QLineEdit()
flashFileButton = QPushButton("Find")
flashFileButton.clicked.connect(self.findFlash)
layoutFW.addWidget(QLabel("FLASH File"))
layoutFW.addWidget(self.flashLocation)
layoutFW.addWidget(flashFileButton)
layout.addLayout(layoutFW)
self.flashLocation.setText(QSettings().value("avr-flash-location"))
# Add buttons
readSigBut = QPushButton("Check Signature")
readSigBut.clicked.connect(self.readSignature)
verifyFlashBut = QPushButton("Verify FLASH")
verifyFlashBut.clicked.connect(self.verifyFlash)
verifyFlashBut.setEnabled(False)
progFlashBut = QPushButton("Erase/Program/Verify FLASH")
progFlashBut.clicked.connect(self.writeFlash)
layoutBut = QHBoxLayout()
layoutBut.addWidget(readSigBut)
layoutBut.addWidget(verifyFlashBut)
layoutBut.addWidget(progFlashBut)
layout.addLayout(layoutBut)
layoutFuse = QHBoxLayout()
readFuseBut = QPushButton("Read Fuses")
readFuseBut.clicked.connect(self.readFuses)
writeFuseBut = QPushButton("Write Fuses")
writeFuseBut.clicked.connect(self.writeFuses)
self.lowfuseLine = QtFixes.QLineEdit("?")
self.lowfuseLine.setMaxLength(2)
self.lowfuseLine.setFixedWidth(25)
self.highfuseLine = QtFixes.QLineEdit("?")
self.highfuseLine.setMaxLength(2)
self.highfuseLine.setFixedWidth(25)
self.extfuseLine = QtFixes.QLineEdit("?")
self.extfuseLine.setMaxLength(2)
self.extfuseLine.setFixedWidth(25)
# Don't allow use to change these fuses
self.highfuseLine.setReadOnly(True)
self.extfuseLine.setReadOnly(True)
layoutFuse.addWidget(readFuseBut)
layoutFuse.addWidget(QLabel("LOW:"))
layoutFuse.addWidget(self.lowfuseLine)
layoutFuse.addWidget(QLabel("HIGH:"))
layoutFuse.addWidget(self.highfuseLine)
layoutFuse.addWidget(QLabel("EXT:"))
layoutFuse.addWidget(self.extfuseLine)
layoutFuse.addWidget(writeFuseBut)
layout.addLayout(layoutFuse)
layoutExtra = QHBoxLayout()
self.clockMode = QPushButton("Enable Slow Clock Mode")
self.clockMode.setCheckable(True)
self.clockMode.clicked.connect(self.toggleSlowClock)
layoutExtra.addWidget(self.clockMode)
layoutExtra.addStretch()
layout.addLayout(layoutExtra)
# Add status stuff
self.statusLine = QPlainTextEdit()
self.statusLine.setReadOnly(True)
# self.statusLine.setFixedHeight(QFontMetrics(self.statusLine.font()).lineSpacing() * 5 + 10)
self.statusLine.append = self.statusLine.appendPlainText
layout.addWidget(self.statusLine)
self.avr._logging = self.statusLine.append
# Set dialog layout
self.setLayout(layout)
class AVRProgrammerDialog(QtFixes.QDialog):
def __init__(self):
super(AVRProgrammerDialog, self).__init__(CWMainGUI.getInstance())
# self.setWindowFlags(self.windowFlags() | Qt.WindowStaysOnTopHint)
self.avr = AVRProgrammer()
self.setWindowTitle("ChipWhisperer-Lite AVR Programmer")
layout = QVBoxLayout()
layoutFW = QHBoxLayout()
self.flashLocation = QtFixes.QLineEdit()
flashFileButton = QPushButton("Find")
flashFileButton.clicked.connect(self.findFlash)
layoutFW.addWidget(QLabel("FLASH File"))
layoutFW.addWidget(self.flashLocation)
layoutFW.addWidget(flashFileButton)
layout.addLayout(layoutFW)
self.flashLocation.setText(QSettings().value("avr-flash-location"))
# Add buttons
readSigBut = QPushButton("Check Signature")
readSigBut.clicked.connect(self.readSignature)
verifyFlashBut = QPushButton("Verify FLASH")
verifyFlashBut.clicked.connect(self.verifyFlash)
verifyFlashBut.setEnabled(False)
progFlashBut = QPushButton("Erase/Program/Verify FLASH")
progFlashBut.clicked.connect(self.writeFlash)
layoutBut = QHBoxLayout()
layoutBut.addWidget(readSigBut)
layoutBut.addWidget(verifyFlashBut)
layoutBut.addWidget(progFlashBut)
layout.addLayout(layoutBut)
layoutFuse = QHBoxLayout()
readFuseBut = QPushButton("Read Fuses")
readFuseBut.clicked.connect(self.readFuses)
writeFuseBut = QPushButton("Write Fuses")
writeFuseBut.clicked.connect(self.writeFuses)
self.lowfuseLine = QtFixes.QLineEdit("?")
self.lowfuseLine.setMaxLength(2)
self.lowfuseLine.setFixedWidth(25)
self.highfuseLine = QtFixes.QLineEdit("?")
self.highfuseLine.setMaxLength(2)
self.highfuseLine.setFixedWidth(25)
self.extfuseLine = QtFixes.QLineEdit("?")
self.extfuseLine.setMaxLength(2)
self.extfuseLine.setFixedWidth(25)
# Don't allow use to change these fuses
self.highfuseLine.setReadOnly(True)
self.extfuseLine.setReadOnly(True)
layoutFuse.addWidget(readFuseBut)
layoutFuse.addWidget(QLabel("LOW:"))
layoutFuse.addWidget(self.lowfuseLine)
layoutFuse.addWidget(QLabel("HIGH:"))
layoutFuse.addWidget(self.highfuseLine)
layoutFuse.addWidget(QLabel("EXT:"))
layoutFuse.addWidget(self.extfuseLine)
layoutFuse.addWidget(writeFuseBut)
layout.addLayout(layoutFuse)
layoutExtra = QHBoxLayout()
self.clockMode = QPushButton("Enable Slow Clock Mode")
self.clockMode.setCheckable(True)
self.clockMode.clicked.connect(self.toggleSlowClock)
layoutExtra.addWidget(self.clockMode)
layoutExtra.addStretch()
layout.addLayout(layoutExtra)
# Add status stuff
self.statusLine = QPlainTextEdit()
self.statusLine.setReadOnly(True)
# self.statusLine.setFixedHeight(QFontMetrics(self.statusLine.font()).lineSpacing() * 5 + 10)
layout.addWidget(self.statusLine)
self.avr.newTextLog.connect(self.append)
# Set dialog layout
self.setLayout(layout)
def append(self, text):
self.statusLine.appendPlainText(text)
def toggleSlowClock(self):
if self.clockMode.isChecked():
self.avr.enableSlowClock(True)
self.clockMode.setText("Disable Slow Clock Mode")
else:
self.avr.enableSlowClock(False)
self.clockMode.setText("Enable Slow Clock Mode")
def reject(self):
#Ensure we disable slow-clock mode
if self.clockMode.isChecked():
self.clockMode.setChecked(False)
self.toggleSlowClock()
#Release AVR
self.avr.close()
QDialog.reject(self)
def findFlash(self):
fname, _ = QFileDialog.getOpenFileName(
self, 'Find FLASH File',
QSettings().value("avr-flash-location"), '*.hex')
if fname:
self.flashLocation.setText(fname)
QSettings().setValue("avr-flash-location", fname)
def readSignature(self, close=True):
self.avr.find()
if close:
self.avr.close()
def readFuses(self):
try:
self.readSignature(close=False)
self.statusLine.appendPlainText("Reading fuses")
lfuse = self.avr.readFuse("low")
hfuse = self.avr.readFuse("high")
efuse = self.avr.readFuse("extended")
self.statusLine.appendPlainText("OK: %02x %02x %02x" %
(lfuse, hfuse, efuse))
self.lowfuseLine.setText("%02x" % lfuse)
self.highfuseLine.setText("%02x" % hfuse)
self.extfuseLine.setText("%02x" % efuse)
except IOError:
self.statusLine.appendPlainText("Reading fuses failed")
self.lowfuseLine.setText("?")
self.highfuseLine.setText("?")
self.extfuseLine.setText("?")
self.avr.close()
def writeFuses(self):
lfuse = int(self.lowfuseLine.text(), 16)
# hfuse = int(self.highfuseLine.text(), 16)
# efuse = int(self.extfuseLine.text(), 16)
self.statusLine.appendPlainText(
"Writing fuse: not only 'low' fuse is written, as hfuse/efuse can disable device\n"
)
try:
self.readSignature(close=False)
self.avr.writeFuse("low", lfuse)
# self.avr.writeFuse("high", hfuse)
# self.avr.writeFuse("extended", efuse)
# print("%x %x %x" % (lfuse, hfuse, efuse))
self.avr.close()
except:
self.avr.close()
raise
def verifyFlash(self):
self.statusLine.appendPlainText("Verify not implemented")
def writeFlash(self, erase=True, verify=True):
self.avr.autoProgram(self.flashLocation.text(), erase, verify,
self.statusLine.appendPlainText,
QCoreApplication.processEvents)
def setUSBInterface(self, iface):
self.avr.setUSBInterface(iface)
class AVRProgrammerDialog(QtFixes.QDialog):
def __init__(self):
super(AVRProgrammerDialog, self).__init__(CWMainGUI.getInstance())
# self.setWindowFlags(self.windowFlags() | Qt.WindowStaysOnTopHint)
self.avr = AVRProgrammer()
self.setWindowTitle("ChipWhisperer-Lite AVR Programmer")
layout = QVBoxLayout()
layoutFW = QHBoxLayout()
self.flashLocation = QtFixes.QLineEdit()
flashFileButton = QPushButton("Find")
flashFileButton.clicked.connect(self.findFlash)
layoutFW.addWidget(QLabel("FLASH File"))
layoutFW.addWidget(self.flashLocation)
layoutFW.addWidget(flashFileButton)
layout.addLayout(layoutFW)
self.flashLocation.setText(QSettings().value("avr-flash-location"))
# Add buttons
readSigBut = QPushButton("Check Signature")
readSigBut.clicked.connect(self.readSignature)
verifyFlashBut = QPushButton("Verify FLASH")
verifyFlashBut.clicked.connect(self.verifyFlash)
verifyFlashBut.setEnabled(False)
progFlashBut = QPushButton("Erase/Program/Verify FLASH")
progFlashBut.clicked.connect(self.writeFlash)
layoutBut = QHBoxLayout()
layoutBut.addWidget(readSigBut)
layoutBut.addWidget(verifyFlashBut)
layoutBut.addWidget(progFlashBut)
layout.addLayout(layoutBut)
layoutFuse = QHBoxLayout()
readFuseBut = QPushButton("Read Fuses")
readFuseBut.clicked.connect(self.readFuses)
writeFuseBut = QPushButton("Write Fuses")
writeFuseBut.clicked.connect(self.writeFuses)
self.lowfuseLine = QtFixes.QLineEdit("?")
self.lowfuseLine.setMaxLength(2)
self.lowfuseLine.setFixedWidth(25)
self.highfuseLine = QtFixes.QLineEdit("?")
self.highfuseLine.setMaxLength(2)
self.highfuseLine.setFixedWidth(25)
self.extfuseLine = QtFixes.QLineEdit("?")
self.extfuseLine.setMaxLength(2)
self.extfuseLine.setFixedWidth(25)
# Don't allow use to change these fuses
self.highfuseLine.setReadOnly(True)
self.extfuseLine.setReadOnly(True)
layoutFuse.addWidget(readFuseBut)
layoutFuse.addWidget(QLabel("LOW:"))
layoutFuse.addWidget(self.lowfuseLine)
layoutFuse.addWidget(QLabel("HIGH:"))
layoutFuse.addWidget(self.highfuseLine)
layoutFuse.addWidget(QLabel("EXT:"))
layoutFuse.addWidget(self.extfuseLine)
layoutFuse.addWidget(writeFuseBut)
layout.addLayout(layoutFuse)
layoutExtra = QHBoxLayout()
self.clockMode = QPushButton("Enable Slow Clock Mode")
self.clockMode.setCheckable(True)
self.clockMode.clicked.connect(self.toggleSlowClock)
layoutExtra.addWidget(self.clockMode)
layoutExtra.addStretch()
layout.addLayout(layoutExtra)
# Add status stuff
self.statusLine = QPlainTextEdit()
self.statusLine.setReadOnly(True)
# self.statusLine.setFixedHeight(QFontMetrics(self.statusLine.font()).lineSpacing() * 5 + 10)
self.statusLine.append = self.statusLine.appendPlainText
layout.addWidget(self.statusLine)
self.avr._logging = self.statusLine.append
# Set dialog layout
self.setLayout(layout)
def toggleSlowClock(self):
if self.clockMode.isChecked():
self.avr.avr.enableSlowClock(True)
self.clockMode.setText("Disable Slow Clock Mode")
else:
self.avr.avr.enableSlowClock(False)
self.clockMode.setText("Enable Slow Clock Mode")
def reject(self):
#Ensure we disable slow-clock mode
if self.clockMode.isChecked():
self.clockMode.setChecked(False)
self.toggleSlowClock()
#Release AVR
self.avr.close()
QDialog.reject(self)
def findFlash(self):
fname, _ = QFileDialog.getOpenFileName(self, 'Find FLASH File', QSettings().value("avr-flash-location"), '*.hex')
if fname:
self.flashLocation.setText(fname)
QSettings().setValue("avr-flash-location", fname)
def readSignature(self, close=True):
self.avr.find()
if close:
self.avr.close()
def readFuses(self):
try:
self.readSignature(close=False)
self.statusLine.append("Reading fuses")
lfuse = self.avr.avr.readFuse("low")
hfuse = self.avr.avr.readFuse("high")
efuse = self.avr.avr.readFuse("extended")
self.statusLine.append("OK: %02x %02x %02x" % (lfuse, hfuse, efuse))
self.lowfuseLine.setText("%02x" % lfuse)
self.highfuseLine.setText("%02x" % hfuse)
self.extfuseLine.setText("%02x" % efuse)
except IOError:
self.statusLine.append("Reading fuses failed")
self.lowfuseLine.setText("?")
self.highfuseLine.setText("?")
self.extfuseLine.setText("?")
self.avr.close()
def writeFuses(self):
lfuse = int(self.lowfuseLine.text(), 16)
# hfuse = int(self.highfuseLine.text(), 16)
# efuse = int(self.extfuseLine.text(), 16)
self.statusLine.append("Writing fuse: not only 'low' fuse is written, as hfuse/efuse can disable device\n")
try:
self.readSignature(close=False)
self.avr.avr.writeFuse("low", lfuse)
# self.avr.avr.writeFuse("high", hfuse)
# self.avr.avr.writeFuse("extended", efuse)
# print("%x %x %x" % (lfuse, hfuse, efuse))
self.avr.close()
except:
self.avr.close()
raise
def verifyFlash(self):
self.statusLine.append("Verify not implemented")
def writeFlash(self, erase=True, verify=True):
status = "FAILED"
fname = self.flashLocation.text()
self.statusLine.append("***Starting FLASH program process at %s***" % datetime.now().strftime('%H:%M:%S'))
if (os.path.isfile(fname)):
self.statusLine.append("File %s last changed on %s" % (fname, time.ctime(os.path.getmtime(fname))))
QCoreApplication.processEvents()
try:
self.statusLine.append("Entering Programming Mode")
QCoreApplication.processEvents()
self.readSignature(close=False)
if erase:
self.statusLine.append("Erasing Chip")
QCoreApplication.processEvents()
self.avr.erase()
self.avr.close()
self.readSignature(close=False)
QCoreApplication.processEvents()
self.avr.program(self.flashLocation.text(), memtype="flash", verify=verify)
QCoreApplication.processEvents()
self.statusLine.append("Exiting programming mode")
self.avr.close()
QCoreApplication.processEvents()
status = "SUCCEEDED"
except IOError as e:
self.statusLine.append("FAILED: %s" % str(e))
try:
self.avr.close()
except IOError:
pass
else:
self.statusLine.append("%s does not appear to be a file, check path" % fname)
self.statusLine.append("***FLASH Program %s at %s***" % (status, datetime.now().strftime('%H:%M:%S')))
def setUSBInterface(self, iface):
self.avr.setUSBInterface(iface)
