def set_memory(self, mem):
_mem = self._memobj.memory[mem.number - 1]
_nam = self._memobj.names[mem.number - 1]
if mem.empty:
wipe_memory(_mem, "\xFF")
return
_mem.rx_freq = mem.freq / 10
if mem.duplex == "+":
_mem.tx_freq = (mem.freq / 10) + (mem.offset / 10)
elif mem.duplex == "-":
_mem.tx_freq = (mem.freq / 10) - (mem.offset / 10)
else:
_mem.tx_freq = (mem.freq / 10)
_mem.skip = mem.skip != "S"
_mem.iswide = mem.mode != "NFM"
_mem.rx_tone[0].set_raw("\xFF")
_mem.rx_tone[1].set_raw("\xFF")
_mem.tx_tone[0].set_raw("\xFF")
_mem.tx_tone[1].set_raw("\xFF")
if mem.tmode == "DTCS":
_mem.tx_tone = int("%x" % int("%i" % (mem.dtcs), 16))
_mem.rx_tone = int("%x" % int("%i" % (mem.dtcs), 16))
# Argh. Set the high order two bits to signal DCS or Inv. DCS
txm = mem.dtcs_polarity[0] == "N" and 0x80 or 0xC0
rxm = mem.dtcs_polarity[1] == "N" and 0x80 or 0xC0
_mem.tx_tone[1].set_raw(chr(ord(_mem.tx_tone[1].get_raw()) | txm))
_mem.rx_tone[1].set_raw(chr(ord(_mem.rx_tone[1].get_raw()) | rxm))
elif mem.tmode:
_mem.tx_tone = int(mem.rtone * 10)
if mem.tmode == "TSQL":
_mem.rx_tone = int(_mem.tx_tone)
if mem.power:
_mem.power_high = not POWER_LEVELS.index(mem.power)
else:
_mem.power_high = True
# Default to disabling the busy channel lockout
# 00 == Close
# 01 == Carrier
# 10 == QT/DQT
_mem.bclo = 0
_nam.name = [0xFF] * 6
for i in range(0, len(mem.name)):
try:
_nam.name[i] = PUXING_CHARSET.index(mem.name[i])
except IndexError:
raise Exception("Character `%s' not supported")
def set_memory(self, mem):
_mem = self._memobj.memory[mem.number - 1]
_nam = self._memobj.names[mem.number - 1]
if mem.empty:
wipe_memory(_mem, "\xFF")
return
_mem.rx_freq = mem.freq / 10
if mem.duplex == "+":
_mem.tx_freq = (mem.freq / 10) + (mem.offset / 10)
elif mem.duplex == "-":
_mem.tx_freq = (mem.freq / 10) - (mem.offset / 10)
else:
_mem.tx_freq = (mem.freq / 10)
_mem.skip = mem.skip != "S"
_mem.iswide = mem.mode != "NFM"
_mem.rx_tone[0].set_raw("\xFF")
_mem.rx_tone[1].set_raw("\xFF")
_mem.tx_tone[0].set_raw("\xFF")
_mem.tx_tone[1].set_raw("\xFF")
if mem.tmode == "DTCS":
_mem.tx_tone = int("%x" % int("%i" % (mem.dtcs), 16))
_mem.rx_tone = int("%x" % int("%i" % (mem.dtcs), 16))
# Argh. Set the high order two bits to signal DCS or Inv. DCS
txm = mem.dtcs_polarity[0] == "N" and 0x80 or 0xC0
rxm = mem.dtcs_polarity[1] == "N" and 0x80 or 0xC0
_mem.tx_tone[1].set_raw(chr(ord(_mem.tx_tone[1].get_raw()) | txm))
_mem.rx_tone[1].set_raw(chr(ord(_mem.rx_tone[1].get_raw()) | rxm))
elif mem.tmode:
_mem.tx_tone = int(mem.rtone * 10)
if mem.tmode == "TSQL":
_mem.rx_tone = int(_mem.tx_tone)
if mem.power:
_mem.power_high = not POWER_LEVELS.index(mem.power)
else:
_mem.power_high = True
# Default to disabling the busy channel lockout
# 00 == Close
# 01 == Carrier
# 10 == QT/DQT
_mem.bclo = 0
_nam.name = [0xFF] * 6
for i in range(0, len(mem.name)):
try:
_nam.name[i] = PUXING_CHARSET.index(mem.name[i])
except IndexError:
raise Exception("Character `%s' not supported")