def ode_integrate_rk(fun_rk, x0, time_max, time_step):
""" Integrate function using Euler method
- fun: Function df/dt = f(x, t) to integrate
- x0: Initial state
- time_tot: Total time to simulate [s]
- time_step: Time step [s]
For Runge-Kutta, use:
solver = ode(fun)
solver.set_integrator('dopri5')
solver.set_initial_value(x0, time[0])
xi = solver.integrate(ti)
Note that solver.integrate(ti) only integrates for one time step at time ti
(where ti is the current time), so you will need to use a for loop
Make sure to use the Result class similarly to the example_integrate
found above (i.e. Result(x, time))
"""
time = np.arange(0, time_max, time_step)
x = np.zeros([len(time), len(x0)])
solver = ode(fun_rk)
solver.set_integrator('dopri5')
solver.set_initial_value(x0, time[0])
for i, ti in enumerate(time):
x[i] = solver.integrate(ti)
return Result(x, time)
def exercise1(clargs):
""" Exercise 1 """
# Setup
pylog.info("Running exercise 1")
# Setup
time_max = 5 # Maximum simulation time
time_step = 0.2 # Time step for ODE integration in simulation
x0 = np.array([1.]) # Initial state
# Integration methods (Exercises 1.a - 1.d)
pylog.info("Running function integration using different methods")
# Example
pylog.debug("Running example plot for integration (remove)")
example = example_integrate(x0, time_max, time_step)
example.plot_state(figure="Example", label="Example", marker=".")
# Analytical (1.a)
time = np.arange(0, time_max, time_step) # Time vector
x_a = analytic_function(time)
analytical = Result(x_a, time) if x_a is not None else None
# Euler (1.b)
euler = euler_integrate(function, x0, time_max, time_step)
# ODE (1.c)
ode = ode_integrate(function, x0, time_max, time_step)
# ODE Runge-Kutta (1.c)
ode_rk = ode_integrate_rk(function_rk, x0, time_max, time_step)
# Euler with lower time step (1.d)
pylog.warning("Euler with smaller ts must be implemented")
euler_time_step = None
euler_ts_small = (euler_integrate(function, x0, time_max, euler_time_step)
if euler_time_step is not None else None)
# Plot integration results
plot_integration_methods(analytical=analytical,
euler=euler,
ode=ode,
ode_rk=ode_rk,
euler_ts_small=euler_ts_small,
euler_timestep=time_step,
euler_timestep_small=euler_time_step)
# Error analysis (Exercise 1.e)
pylog.warning("Error analysis must be implemented")
# Show plots of all results
if not clargs.save_figures:
plt.show()
return
def ode_integrate(fun, x0, time_max, time_step):
""" Integrate function using Euler method
- fun: Function df/dt = f(x, t) to integrate
- x0: Initial state
- time_tot: Total time to simulate [s]
- time_step: Time step [s]
Use odeint from the scipy library for integration
Make sure to then use the Result class similarly to the example_integrate
found above (i.e. Result(x, time))
"""
time = np.arange(0, time_max, time_step)
x = odeint(fun, x0, time)
return Result(x, time)
def euler_integrate(fun, x0, time_max, time_step):
""" Integrate function using Euler method
- fun: Function df/dt = f(x, t) to integrate
- x0: Initial state
- time_tot: Total time to simulate [s]
- time_step: Time step [s]
For loop in Python:
>>> a = [0, 0, 0] # Same as [0 for _ in range(3)] (List comprehension)
>>> for i in range(3):
... a[i] = i
>>> print(a)
[0, 1, 2]
Creating a matrix of zeros in python:
>>> state = np.zeros([3, 2])
>>> print(state)
[[0. 0.]
[0. 0.]
[0. 0.]]
For loop for a state in python
>>> state = np.zeros([3, 2])
>>> state[0, 0], state[0, 1] = 1, 2
>>> for i, time in enumerate([0, 0.1, 0.2]):
... state[i, 0] += time
... state[i, 1] -= time
>>> print(state)
[[ 1. 2. ]
[ 0.1 -0.1]
[ 0.2 -0.2]]
Make sure to use the Result class similarly to the example_integrate
found above (i.e. Result(x, time))
"""
time = np.arange(0, time_max, time_step)
x = np.zeros([len(time), len(x0)])
x[0] = x0
for i, ti in enumerate(time[:-1]):
x[i + 1] = x[i] + fun(x[i], ti) * time_step
return Result(x, time)
def example_integrate(x0, time_max, time_step):
""" Example to show how to use Python
Note that the Result class takes x and time as input, and is used to
facilitate the plotting of the results, where x and time are lists or
arrays
Additionally, using:
r = Result(x, t)
You can then use r.state or r.time to extract the original x and t
You can then plot the state in function of time with:
r.plot_state(figure="Name of figure")
"""
time = np.arange(0, time_max, time_step)
x = np.zeros([len(time), len(x0)])
for i, ti in enumerate(time[:-1]):
x[i + 1] = x[i] + 1e-2 * ti
# for i in range(len(time[:-1])): # Also possible
# x[i+1] = x[i] + 0.2
return Result(x, time)
def exercise1(clargs):
""" Exercise 1 """
# Setup
pylog.info("Running exercise 1")
# Setup
time_max = 5 # Maximum simulation time
time_step = 0.2 # Time step for ODE integration in simulation
x0 = np.array([1.]) # Initial state
# Integration methods (Exercises 1.a - 1.d)
pylog.info("Running function integration using different methods")
# Analytical (1.a)
time = np.arange(0, time_max, time_step) # Time vector
x_a = analytic_function(time)
analytical = Result(x_a, time) if x_a is not None else None
# Euler (1.b)
euler = euler_integrate(function, x0, time_max, time_step)
error(euler.state, analytical.state, "Euler")
# ODE (1.c)
ode = ode_integrate(function, x0, time_max, time_step)
error(ode.state, analytical.state, "LSODA")
# ODE Runge-Kutta (1.c)
ode_rk = ode_integrate_rk(function_rk, x0, time_max, time_step)
error(ode_rk.state, analytical.state, "Runge-Kutta")
# Euler with lower time step (1.d)
euler_time_step = 0.05
time_small = np.arange(0, time_max, euler_time_step) # Time vector
x_a = analytic_function(time_small)
analytical_ts_small = Result(x_a, time_small)
euler_ts_small = (euler_integrate(function, x0, time_max, euler_time_step)
if euler_time_step is not None else None)
error(euler_ts_small.state, analytical_ts_small.state,
"Euler (smaller ts)")
# Plot integration results
plot_integration_methods(analytical=analytical,
euler=euler,
ode=ode,
ode_rk=ode_rk,
euler_ts_small=euler_ts_small,
euler_timestep=time_step,
euler_timestep_small=euler_time_step)
# Error analysis (Exercise 1.e)
pylog.info("Studying integration error using different methods")
dt_list = np.logspace(-3, 0, 20) # List of timesteps (powers of 10)
integration_errors = [["L1", 1], ["L2", 2], ["Linf", 0]]
methods = [["Euler", euler_integrate, function],
["Lsoda", ode_integrate, function],
["RK", ode_integrate_rk, function_rk]]
for error_name, error_index in integration_errors:
for name, integration_function, f in methods:
compute_error(f,
analytic_function,
integration_function,
x0,
dt_list,
time_max=time_max,
figure=error_name,
label=name,
n=error_index)
# Show plots of all results
if not clargs.save_figures:
plt.show()
return
