]
STAT_REG = [
{
'name': 'AM',
'stbit': 7,
'nbits': 1
},
{
'name': 'DR',
'stbit': 5,
'nbits': 1
},
]
Ann = SrdIntEnum.from_str('Ann', 'CMD REG_WR REG_RD TX RX RESP WARN')
class Decoder(srd.Decoder):
api_version = 3
id = 'nrf905'
name = 'nRF905'
longname = 'Nordic Semiconductor nRF905'
desc = '433/868/933MHz transceiver chip.'
license = 'mit'
inputs = ['spi']
outputs = []
tags = ['IC', 'Wireless/RF']
annotations = (
('cmd', 'Command sent to the device'),
('reg-write', 'Config register written to the device'),
## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
# TODO:
# - EDID < 1.3
# - add short annotations
# - Signal level standard field in basic display parameters block
# - Additional color point descriptors
# - Additional standard timing descriptors
# - Extensions
import sigrokdecode as srd
from common.srdhelper import SrdIntEnum
import os
St = SrdIntEnum.from_str('St', 'OFFSET EXTENSIONS HEADER EDID')
EDID_HEADER = [0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00]
OFF_VENDOR = 8
OFF_VERSION = 18
OFF_BASIC = 20
OFF_CHROM = 25
OFF_EST_TIMING = 35
OFF_STD_TIMING = 38
OFF_DET_TIMING = 54
OFF_NUM_EXT = 126
OFF_CHECKSUM = 127
# Pre-EDID established timing modes
est_modes = [
'720x400@70Hz',
0b11: '8kHz',
}
DS3231_I2C_ADDRESS = 0x68
def regs_and_bits():
l = [('reg_' + r.lower(), r + ' register') for r in regs]
l += [('bit_' + re.sub(r'\/| ', '_', b).lower(), b + ' bit') for b in bits]
return tuple(l)
a = ['REG_' + r.upper() for r in regs] + \
['BIT_' + re.sub('\/| ', '_', b).upper() for b in bits] + \
['READ_DATE_TIME', 'WRITE_DATE_TIME', 'READ_REG', 'WRITE_REG', 'WARNING']
Ann = SrdIntEnum.from_list('Ann', a)
class DateTime(object):
days_of_week = (
'Sunday',
'Monday',
'Tuesday',
'Wednesday',
'Thursday',
'Friday',
'Saturday',
)
def __init__(self):
self.hours = -1
token_fields = 'START TRANSMISSION CMD ARG CRC END'.split()
reg_card_status = 'OUT_OF_RANGE ADDRESS_ERROR BLOCK_LEN_ERROR ERASE_SEQ_ERROR \
ERASE_PARAM WP_VIOLATION CARD_IS_LOCKED LOCK_UNLOCK_FAILED COM_CRC_ERROR \
ILLEGAL_COMMAND CARD_ECC_FAILED CC_ERROR ERROR RSVD_DEFERRED_RESPONSE \
CSD_OVERWRITE WP_ERASE_SKIP CARD_ECC_DISABLED ERASE_RESET CURRENT_STATE \
READY_FOR_DATA RSVD FX_EVENT APP_CMD RSVD_SDIO AKE_SEQ_ERROR RSVD_APP_CMD \
RSVD_TESTMODE'.split()
reg_cid = 'MID OID PNM PRV PSN RSVD MDT CRC ONE'.split()
reg_csd = 'CSD_STRUCTURE RSVD TAAC NSAC TRAN_SPEED CCC READ_BL_LEN \
READ_BL_PARTIAL WRITE_BLK_MISALIGN READ_BLK_MISALIGN DSR_IMP C_SIZE \
VDD_R_CURR_MIN VDD_R_CURR_MAX VDD_W_CURR_MIN VDD_W_CURR_MAX C_SIZE_MULT \
ERASE_BLK_EN SECTOR_SIZE WP_GRP_SIZE WP_GRP_ENABLE R2W_FACTOR \
WRITE_BL_LEN WRITE_BL_PARTIAL FILE_FORMAT_GRP COPY PERM_WRITE_PROTECT \
TMP_WRITE_PROTECT FILE_FORMAT CRC ONE'.split()
Pin = SrdIntEnum.from_str('Pin', 'CMD CLK DAT0 DAT1 DAT2 DAT3')
a = ['CMD%d' % i for i in range(64)] + ['ACMD%d' % i for i in range(64)] + \
['RESPONSE_R' + r.upper() for r in responses] + \
['R_STATUS_' + r for r in reg_card_status] + \
['R_CID_' + r for r in reg_cid] + \
['R_CSD_' + r for r in reg_csd] + \
['BIT_' + r for r in ('0', '1')] + \
['F_' + f for f in token_fields] + \
['DECODED_BIT', 'DECODED_F']
Ann = SrdIntEnum.from_list('Ann', a)
s = ['GET_COMMAND_TOKEN', 'HANDLE_CMD999'] + \
['HANDLE_CMD%d' % i for i in range(64)] + \
['HANDLE_ACMD%d' % i for i in range(64)] + \
['GET_RESPONSE_R%s' % r.upper() for r in responses]
def set_value(self, value):
self.value = value
def get_bit_annotation(self):
if self.type == BitType.OTHER:
annotation = self.values[self.value].copy()
else:
annotation = self.type[self.value].copy()
for index in range(len(annotation)):
if '%s' in annotation[index]:
annotation[index] = str(annotation[index] % self.name)
return annotation
Ann = SrdIntEnum.from_str('Ann', 'READ WRITE MB REG_ADDRESS REG_DATA WARNING')
St = SrdIntEnum.from_str('St', 'IDLE ADDRESS_BYTE DATA')
class Decoder(srd.Decoder):
api_version = 3
id = 'adxl345'
name = 'ADXL345'
longname = 'Analog Devices ADXL345'
desc = 'Analog Devices ADXL345 3-axis accelerometer.'
license = 'gplv2+'
inputs = ['spi']
outputs = []
tags = ['IC', 'Sensor']
annotations = (
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
from common.srdhelper import SrdIntEnum
Pin = SrdIntEnum.from_str('Pin', 'CLK DATA LOAD LDAC')
dacs = {
0: 'DACA',
1: 'DACB',
2: 'DACC',
3: 'DACD',
}
class Decoder(srd.Decoder):
api_version = 3
id = 'tlc5620'
name = 'TI TLC5620'
longname = 'Texas Instruments TLC5620'
desc = 'Texas Instruments TLC5620 8-bit quad DAC.'
license = 'gplv2+'
## v0.2 - 28 April 2020 B.VERNOUX
### Use ST25R3916 Datasheet DS12484 Rev 2 (December 2019)
## v0.3 - 17 June 2020 B.VERNOUX
### Use ST25R3916 Datasheet DS12484 Rev 3 (04 June 2020)
## v0.4 - 10 Aug 2021 B.VERNOUX
### Fix FIFOR/FIFOW issues with Pulseview (with "Tabular Output View")
### because of FIFO Read/FIFO Write commands, was not returning the
### annotations short name FIFOR/FIFOW
import sigrokdecode as srd
from collections import namedtuple
from common.srdhelper import SrdIntEnum
from .lists import *
Ann = SrdIntEnum.from_str('Ann', 'BURST_READ BURST_WRITE \
BURST_READB BURST_WRITEB BURST_READT BURST_WRITET \
DIRECTCMD FIFO_WRITE FIFO_READ STATUS WARN')
Pos = namedtuple('Pos', ['ss', 'es'])
Data = namedtuple('Data', ['mosi', 'miso'])
class Decoder(srd.Decoder):
api_version = 3
id = 'st25r39xx_spi'
name = 'ST25R39xx (SPI mode)'
longname = 'STMicroelectronics ST25R39xx'
desc = 'High performance NFC universal device and EMVCo reader protocol.'
license = 'gplv2+'
inputs = ['spi']
outputs = []
tags = ['IC', 'Wireless/RF']
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
from common.srdhelper import SrdIntEnum
Pin = SrdIntEnum.from_str('Pin', 'SDCKA SDCKB')
ann = [
['Size', 'L'],
['SrcAP', 'S'],
['DstAP', 'D'],
['Cmd', 'C'],
['Data'],
['Cksum', 'K'],
]
class Decoder(srd.Decoder):
api_version = 3
id = 'maple_bus'
name = 'Maple bus'
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
from common.srdhelper import SrdIntEnum
Ann = SrdIntEnum.from_str('Ann', 'ROMDATA')
Bin = SrdIntEnum.from_str('Bin', 'ROMDATA')
class ChannelError(Exception):
pass
class Decoder(srd.Decoder):
api_version = 3
id = 'mcs48'
name = 'MCS-48'
longname = 'Intel MCS-48'
desc = 'Intel MCS-48 external memory access protocol.'
license = 'gplv2+'
inputs = ['logic']
outputs = []
tags = ['Retro computing']
# This implementation is incomplete. TODO items:
# - Support the optional RESET# pin, detect cold and warm reset.
# - Split slot values into audio samples of their respective width and
# frequency (either on user provided parameters, or from inspection of
# decoded register access).
import sigrokdecode as srd
from common.srdhelper import SrdIntEnum
class ChannelError(Exception):
pass
Pin = SrdIntEnum.from_str('Pin', 'SYNC BIT_CLK SDATA_OUT SDATA_IN RESET')
slots = 'TAG ADDR DATA 03 04 05 06 07 08 09 10 11 IO'.split()
a = 'BITS_OUT BITS_IN SLOT_RAW_OUT SLOT_RAW_IN WARN ERROR'.split() + \
['SLOT_OUT_' + s for s in slots] + ['SLOT_IN_' + s for s in slots]
Ann = SrdIntEnum.from_list('Ann', a)
Bin = SrdIntEnum.from_str('Bin', 'FRAME_OUT FRAME_IN SLOT_RAW_OUT SLOT_RAW_IN')
class Decoder(srd.Decoder):
api_version = 3
id = 'ac97'
name = "AC '97"
longname = "Audio Codec '97"
desc = 'Audio and modem control for PC systems.'
bitrates = {
'low-speed': 1500000, # 1.5Mb/s (+/- 1.5%)
'low-speed-rp': 1500000, # 1.5Mb/s (+/- 1.5%)
'full-speed': 12000000, # 12Mb/s (+/- 0.25%)
'automatic': None
}
sym_annotation = {
'J': [0, ['J']],
'K': [1, ['K']],
'SE0': [2, ['SE0', '0']],
'SE1': [3, ['SE1', '1']],
}
St = SrdIntEnum.from_str('St', 'IDLE GET_BIT GET_EOP WAIT_IDLE')
class SamplerateError(Exception):
pass
class Decoder(srd.Decoder):
api_version = 3
id = 'usb_signalling'
name = 'USB signalling'
longname = 'Universal Serial Bus (LS/FS) signalling'
desc = 'USB (low-speed/full-speed) signalling protocol.'
license = 'gplv2+'
inputs = ['logic']
outputs = ['usb_signalling']
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
from collections import namedtuple
from common.srdhelper import SrdIntEnum
from .lists import *
Ann = SrdIntEnum.from_str(
'Ann', 'STROBE SINGLE_READ SINGLE_WRITE BURST_READ \
BURST_WRITE STATUS_READ STATUS WARN')
Pos = namedtuple('Pos', ['ss', 'es'])
Data = namedtuple('Data', ['mosi', 'miso'])
class Decoder(srd.Decoder):
api_version = 3
id = 'cc1101'
name = 'CC1101'
longname = 'Texas Instruments CC1101'
desc = 'Low-power sub-1GHz RF transceiver chip.'
license = 'gplv2+'
inputs = ['spi']
outputs = []
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
from math import ceil
from common.srdhelper import SrdIntEnum
from .lists import *
L = len(cmds)
RX = 0
TX = 1
Ann = SrdIntEnum.from_list('Ann',
[c[0]
for c in cmds.values()] + ['BIT', 'FIELD', 'WARN'])
def cmd_annotation_classes():
return tuple([tuple([cmd[0].lower(), cmd[1]]) for cmd in cmds.values()])
class Decoder(srd.Decoder):
api_version = 3
id = 'amulet_ascii'
name = 'Amulet ASCII'
longname = 'Amulet LCD ASCII'
desc = 'Amulet Technologies LCD controller ASCII protocol.'
license = 'gplv3+'
inputs = ['uart']
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import re
import sigrokdecode as srd
from common.srdhelper import SrdIntEnum
Pin = SrdIntEnum.from_str('Pin', 'CLK DATA CE')
ann_cmdbit, ann_databit, ann_cmd, ann_data, ann_warning = range(5)
class Decoder(srd.Decoder):
api_version = 3
id = 'sda2506'
name = 'SDA2506'
longname = 'Siemens SDA 2506-5'
desc = 'Serial nonvolatile 1-Kbit EEPROM.'
license = 'gplv2+'
inputs = ['logic']
outputs = []
tags = ['IC', 'Memory']
channels = (
