Пример #1
0
 def set_printk(self, CUR=1, DEF=1, MIN=1, BTDEF=7):
     self.sendline('echo "%d %d %d %d" > /proc/sys/kernel/printk' %
                   (CUR, DEF, MIN, BTDEF))
     self.expect(self.prompt)
     if not BFT_DEBUG:
         common.print_bold("printk set to %d %d %d %d" %
                           (CUR, DEF, MIN, BTDEF))
    def flash_rootfs(self, ROOTFS):
        common.print_bold("\n===== Flashing rootfs =====\n")
        filename = self.prepare_file(ROOTFS)

        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
        self.spi_flash_bin("0x006b0000", size, self.uboot_ddr_addr,
                           "0x1920000")
Пример #3
0
 def flash_linux(self, KERNEL):
     common.print_bold("\n===== Flashing linux =====\n")
     filename = self.prepare_file(KERNEL)
     self.sendline('setenv firmwareName %s' % filename)
     self.expect(self.uprompt)
     self.sendline('run update_both_images')
     self.expect(self.uprompt, timeout=90)
Пример #4
0
 def flash_rootfs(self, ROOTFS):
     '''Flash Root File System image'''
     common.print_bold("\n===== Flashing rootfs =====\n")
     filename = self.prepare_file(ROOTFS)
     if self.model == "ap135-nand":
         self.tftp_get_file_uboot("0x82060000", filename)
         self.sendline('nand erase 0x700000 0x1E00000')
         self.expect('OK')
         self.expect(self.uprompt)
         self.sendline('nand write.jffs2 0x82060000 0x700000 $filesize')
         self.expect('OK')
         self.expect(self.uprompt)
         # erase the overlay otherwise, things will be in a weird state
         self.sendline('nand erase 0x1F00000')
         self.expect('OK')
         self.expect(self.uprompt)
         return
     self.tftp_get_file_uboot("0x82060000", filename)
     self.sendline('erase %s +$filesize' % self.rootfs_addr)
     self.expect('Erased .* sectors', timeout=180)
     self.expect(self.uprompt)
     self.sendline('protect off all')
     self.expect(self.uprompt)
     self.sendline('cp.b $fileaddr %s $filesize' % self.rootfs_addr)
     self.expect('done', timeout=80)
     self.expect(self.uprompt)
     self.sendline('cmp.b $fileaddr %s $filesize' % self.rootfs_addr)
     self.expect('Total of .* bytes were the same')
Пример #5
0
    def collect_stats(self, stats=[]):
        pp = self.get_pp_dev()
        self.stats = []
        self.failed_stats = {}

        for stat in stats:
            if 'mpstat' in stat:
                for i in range(5):
                    try:
                        pp.sendcontrol('c')
                        pp.sendline(
                            "kill `ps | grep mpstat | grep -v grep | awk '{print $1}'`"
                        )
                        pp.expect_exact(
                            "kill `ps | grep mpstat | grep -v grep | awk '{print $1}'`"
                        )
                        pp.expect(pp.prompt)
                        break
                    except:
                        if i == 4:
                            print_bold("FAILED TO KILL MPSTAT!")
                            pp.sendcontrol('c')
                        pass

                pp.sendline('mpstat -P ALL 5  > %s/mpstat &' % self.tmpdir)
                if 0 == pp.expect(['mpstat: not found'] + pp.prompt):
                    self.failed_stats['mpstat'] = float('nan')
                    continue
                elif 0 == pp.expect(['mpstat: not found', pexpect.TIMEOUT],
                                    timeout=4):
                    self.failed_stats['mpstat'] = float('nan')
                    continue

            self.stats.append(stat)
Пример #6
0
    def flash_uboot(self, uboot):
        '''In this case it's flashing the vfat partition of the bootload.
           Need to have that image u-boot and serial turned on via dtoverlay
           for things to work after flashing'''
        common.print_bold("\n===== Flashing bootloader (and u-boot) =====\n")
        filename = self.prepare_file(uboot)
        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)

        self.sendline('mmc part')
        # get offset of ext (83) partition after a fat (0c) partition
        self.expect('\r\n\s+\d+\s+(\d+)\s+(\d+).*0c( Boot)?\r\n')
        start = hex(int(self.match.groups()[0]))
        if (int(size) != int(self.match.groups()[1]) * 512):
            raise Exception("Partition size does not match, refusing to flash")
        self.expect(self.uprompt)
        count = hex(int(size / 512))
        self.sendline('mmc erase %s %s' % (start, count))
        self.expect(self.uprompt)
        self.sendline('mmc write %s %s %s' %
                      (self.uboot_ddr_addr, start, count))
        self.expect(self.uprompt, timeout=120)

        self.reset()
        self.wait_for_boot()
        self.setup_uboot_network()
Пример #7
0
    def flash_meta(self, META_BUILD):
        '''
        A meta image contains several components wrapped up into one file.
        Here we flash a meta image onto the board.
        '''
        common.print_bold("\n===== Flashing meta =====\n")

        filename = self.prepare_file(META_BUILD)
        self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
        # probe SPI flash incase this is a NOR boot meta
        if self.model not in ("dk01", "dk04"):
            self.sendline('sf probe')
            self.expect('sf probe')
            self.expect(self.uprompt)
        self.sendline('machid=%s && imgaddr=%s && source $imgaddr:script && echo DONE' % (self.machid, self.uboot_ddr_addr))
        self.expect('DONE')
        try:
            self.expect("Can't find 'script' FIT subimage", timeout=5)
        except:
            pass
        else:
            self.sendline('machid=%s && imgaddr=%s && source $imgaddr:SCRIPT && echo DONE' % (self.machid, self.uboot_ddr_addr))
            self.expect('DONE')
        self.expect('DONE', timeout=400)
        self.expect(self.uprompt)
        # reboot incase partitions changed
        self.reset()
        self.wait_for_boot()
        self.setup_uboot_network()
Пример #8
0
 def flash_rootfs(self, ROOTFS):
     '''Flash Root File System image'''
     common.print_bold("\n===== Flashing rootfs =====\n")
     filename = self.prepare_file(ROOTFS)
     if self.model == "ap135-nand":
         self.tftp_get_file_uboot("0x82060000", filename)
         self.sendline('nand erase 0x700000 0x1E00000')
         self.expect('OK')
         self.expect(self.uprompt)
         self.sendline('nand write.jffs2 0x82060000 0x700000 $filesize')
         self.expect('OK')
         self.expect(self.uprompt)
         # erase the overlay otherwise, things will be in a weird state
         self.sendline('nand erase 0x1F00000')
         self.expect('OK')
         self.expect(self.uprompt)
         return
     self.tftp_get_file_uboot("0x82060000", filename)
     self.sendline('erase %s +$filesize' % self.rootfs_addr)
     self.expect('Erased .* sectors', timeout=180)
     self.expect(self.uprompt)
     self.sendline('cp.b $fileaddr %s $filesize' % self.rootfs_addr)
     self.expect('done', timeout=80)
     self.expect(self.uprompt)
     self.sendline('cmp.b $fileaddr %s $filesize' % self.rootfs_addr)
     self.expect('Total of .* bytes were the same')
Пример #9
0
 def boot_linux(self, rootfs=None, bootargs=None):
     common.print_bold("\n===== Booting linux for %s on %s =====" %
                       (self.model, self.root_type))
     self.switch_to_mode(MODE_DISABLED)
     self.sendline('npcpu start')
     self.sendline('bootkernel -c %kernel_cmd_line%')
     self.delaybetweenchar = None
Пример #10
0
    def flash_meta(self, META_BUILD, wan, lan):
        '''
        A meta image contains several components wrapped up into one file.
        Here we flash a meta image onto the board.
        '''
        common.print_bold("\n===== Flashing meta =====\n")

        filename = self.prepare_file(META_BUILD)
        self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
        # probe SPI flash incase this is a NOR boot meta
        if self.model not in ("dk01", "dk04"):
            self.sendline('sf probe')
            self.expect('sf probe')
            self.expect(self.uprompt)
        self.sendline(
            'machid=%s && imgaddr=%s && source $imgaddr:script && echo DONE' %
            (self.machid, self.uboot_ddr_addr))
        self.expect('DONE')
        try:
            self.expect("Can't find 'script' FIT subimage", timeout=5)
        except:
            pass
        else:
            self.sendline(
                'machid=%s && imgaddr=%s && source $imgaddr:SCRIPT && echo DONE'
                % (self.machid, self.uboot_ddr_addr))
            self.expect('DONE')
        self.expect('DONE', timeout=400)
        self.expect(self.uprompt)
        # reboot incase partitions changed
        self.reset()
        self.wait_for_boot()
        self.setup_uboot_network()
Пример #11
0
    def flash_linux(self, KERNEL):
        common.print_bold("\n===== Flashing linux =====\n")
        filename = self.prepare_file(KERNEL)

        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
        self.spi_flash_bin(self.kernel_addr, size, self.uboot_ddr_addr,
                           self.kernel_size)
Пример #12
0
 def flash_linux(self, KERNEL):
     common.print_bold("\n===== Flashing linux =====\n")
     filename = self.prepare_file(KERNEL)
     self.sendline('setenv firmwareName %s' % filename)
     self.expect(self.uprompt)
     self.sendline('run update_both_images')
     self.expect(self.uprompt, timeout=90)
Пример #13
0
    def flash_rootfs(self, ROOTFS):
        common.print_bold("\n===== Flashing rootfs =====\n")
        filename = self.prepare_file(ROOTFS)

        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
        self.nand_flash_bin(self.rootfs_addr, self.rootfs_size,
                            self.uboot_ddr_addr)
Пример #14
0
 def send(self, s):
     if not self.in_detect_fatal_error and self.linux_booted:
         self.in_detect_fatal_error = True
         error_detect.detect_fatal_error(self)
         self.in_detect_fatal_error = False
     if BFT_DEBUG:
         common.print_bold("%s = sending: %s" % (error_detect.caller_file_line(3), repr(s)))
     return super(OpenWrtRouter, self).send(s)
Пример #15
0
    def flash_linux(self, KERNEL):
        common.print_bold("\n===== Flashing linux =====\n")

        filename = self.prepare_file(KERNEL)
        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)

        self.sendline('fatwrite mmc 0 %s uImage $filesize' % self.uboot_ddr_addr)
        self.expect(self.uprompt)
Пример #16
0
    def flash_linux(self, KERNEL):
        common.print_bold("\n===== Flashing linux =====\n")

        filename = self.prepare_file(KERNEL)
        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)

        self.kernel_file = os.path.basename(KERNEL)
        self.sendline('fatwrite mmc 0 %s %s $filesize' % (self.kernel_file, self.uboot_ddr_addr))
        self.expect(self.uprompt)
Пример #17
0
 def send(self, s):
     if not self.in_detect_fatal_error and self.linux_booted:
         self.in_detect_fatal_error = True
         error_detect.detect_fatal_error(self)
         self.in_detect_fatal_error = False
     if BFT_DEBUG:
         common.print_bold("%s = sending: %s" %
                           (error_detect.caller_file_line(3), repr(s)))
     return super(OpenWrtRouter, self).send(s)
Пример #18
0
 def set_printk(self, CUR=1, DEF=1, MIN=1, BTDEF=7):
     '''Modifies the log level in kernel'''
     try:
         self.sendline('echo "%d %d %d %d" > /proc/sys/kernel/printk' % (CUR, DEF, MIN, BTDEF))
         self.expect(self.prompt, timeout=10)
         if not BFT_DEBUG:
             print_bold("printk set to %d %d %d %d" % (CUR, DEF, MIN, BTDEF))
     except:
         pass
Пример #19
0
    def flash_linux(self, KERNEL):
        common.print_bold("\n===== Flashing linux =====\n")

        filename = self.prepare_file(KERNEL)
        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)

        self.kernel_file = os.path.basename(KERNEL)
        self.sendline('fatwrite mmc 0 %s %s $filesize' %
                      (self.kernel_file, self.uboot_ddr_addr))
        self.expect(self.uprompt)
 def flash_uboot(self, uboot):
     '''Flash Universal Bootloader image.'''
     common.print_bold("\n===== Flashing u-boot =====\n")
     filename = self.prepare_file(uboot)
     size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
     self.sendline('ipq_nand sbl')
     self.expect(self.uprompt)
     self.nand_flash_bin(self.uboot_addr, self.uboot_size, self.uboot_ddr_addr)
     self.reset()
     self.wait_for_boot()
     self.setup_uboot_network()
Пример #21
0
 def flash_uboot(self, uboot):
     '''Flash Universal Bootloader image.'''
     common.print_bold("\n===== Flashing u-boot =====\n")
     filename = self.prepare_file(uboot)
     self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
     self.sendline('ipq_nand sbl')
     self.expect(self.uprompt)
     self.nand_flash_bin(self.uboot_addr, self.uboot_size, self.uboot_ddr_addr)
     self.reset()
     self.wait_for_boot()
     self.setup_uboot_network()
Пример #22
0
    def send(self, s):
        if BFT_DEBUG:
            common.print_bold("%s = sending: %s" %
                              (error_detect.caller_file_line(3), repr(s)))

        if self.delaybetweenchar is not None:
            ret = 0
            for char in s:
                ret += super(BaseDevice, self).send(char)
                time.sleep(self.delaybetweenchar)
            return ret

        return super(BaseDevice, self).send(s)
Пример #23
0
 def boot_linux(self, rootfs=None):
     common.print_bold("\n===== Booting linux for %s on %s =====" % (self.model, self.root_type))
     if self.model == "ap135-nand":
         self.sendline('setenv bootcmd nboot 0x81000000 0 0x100000')
         self.expect(self.uprompt)
     else:
         self.sendline("setenv bootcmd 'bootm %s'" % self.kernel_addr)
         self.expect(self.uprompt)
     self.sendline("saveenv")
     self.expect(self.uprompt)
     self.sendline("print")
     self.expect(self.uprompt)
     self.sendline("boot")
Пример #24
0
    def send(self, s):
        if BFT_DEBUG:
            common.print_bold("%s = sending: %s" %
                              (error_detect.caller_file_line(3), repr(s)))

        if self.delaybetweenchar is not None:
            ret = 0
            for char in s:
                ret += super(BaseDevice, self).send(char)
                time.sleep(self.delaybetweenchar)
            return ret

        return super(BaseDevice, self).send(s)
Пример #25
0
    def expect_helper(self, pattern, wrapper, *args, **kwargs):
        if not BFT_DEBUG:
            return wrapper(pattern, *args, **kwargs)

        if 'base.py: expect():' in error_detect.caller_file_line(3) or \
                'base.py: expect_exact():' in error_detect.caller_file_line(3):
            idx = 5
        else:
            idx = 3
        common.print_bold("%s = expecting: %s" %
                          (error_detect.caller_file_line(idx), repr(pattern)))
        try:
            ret = wrapper(pattern, *args, **kwargs)

            frame = error_detect.caller_file_line(idx)

            if hasattr(self.match, "group"):
                common.print_bold("%s = matched: %s" %
                                  (frame, repr(self.match.group())))
            else:
                common.print_bold("%s = matched: %s" % (frame, repr(pattern)))
            return ret
        except:
            common.print_bold("expired")
            raise
Пример #26
0
    def boot_linux(self, rootfs=None):
        common.print_bold("\n===== Booting linux for %s on %s =====" % (self.model, self.root_type))

        #self.sendline('setenv bootargs "8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa02082 bcm2709.serial=0xc07187c2 bcm2709.uart_clock=48000000 smsc95xx.macaddr=B8:27:EB:71:87:C2 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 root=mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait"')
        #self.expect(self.uprompt)

        self.sendline("setenv bootcmd 'fatload mmc 0 ${kernel_addr_r} uImage; bootm ${kernel_addr_r} - ${fdt_addr}'")
        self.expect(self.uprompt)
        self.sendline('saveenv')
        self.expect(self.uprompt)
        self.sendline('boot')

        # Linux handles serial better ?
        self.delaybetweenchar = None
Пример #27
0
 def boot_linux(self, rootfs=None):
     common.print_bold("\n===== Booting linux for %s on %s =====" %
                       (self.model, self.root_type))
     if self.model == "ap135-nand":
         self.sendline('setenv bootcmd nboot 0x81000000 0 0x100000')
         self.expect(self.uprompt)
     else:
         self.sendline("setenv bootcmd 'bootm %s'" % self.kernel_addr)
         self.expect(self.uprompt)
     self.sendline("saveenv")
     self.expect(self.uprompt)
     self.sendline("print")
     self.expect(self.uprompt)
     self.sendline("boot")
    def boot_linux_ramboot(self):
        '''Boot Linux from initramfs'''
        common.print_bold("\n===== Booting linux (ramboot) for %s =====" % self.model)

        bootargs = 'console=ttyMSM0,115200 clk_ignore_unused norootfssplit mem=256M %s' % self.get_safe_mtdparts()
        if self.boot_dbg:
            bootargs += " dyndbg=\"module %s +p\"" % self.boot_dbg

        self.sendline("setenv bootargs '%s'" % bootargs)
        self.expect(self.uprompt)
        self.sendline('set fdt_high 0x85000000')
        self.expect(self.uprompt)
        self.sendline("bootm %s" % self.uboot_ddr_addr)
        self.expect("Loading Device Tree to")
        self.rambooted = True
Пример #29
0
    def boot_linux(self, rootfs=None, bootargs=""):
        common.print_bold("\n===== Booting linux for %s on %s =====" % (self.model, self.root_type))
        self.reset()
        self.wait_for_boot()

        self.sendline("set bootargs 'console=ttyMSM0,115200'")
        self.expect(self.uprompt)
        self.sendline("set fsbootargs 'rootfstype=squashfs,jffs2'")
        self.expect(self.uprompt)
        self.sendline('set bootcmd bootipq')
        self.expect(self.uprompt)
        self.sendline("saveenv")
        self.expect(self.uprompt)
        self.sendline("print")
        self.expect(self.uprompt)
        self.sendline('run bootcmd')
Пример #30
0
    def boot_linux(self, rootfs=None):
        common.print_bold("\n===== Booting linux for %s on %s =====" % (self.model, self.root_type))
        self.reset()
        self.wait_for_boot()

        self.sendline("set bootargs 'console=ttyMSM0,115200'")
        self.expect(self.uprompt)
        self.sendline("set fsbootargs 'rootfstype=squashfs,jffs2'")
        self.expect(self.uprompt)
        self.sendline('set bootcmd bootipq')
        self.expect(self.uprompt)
        self.sendline("saveenv")
        self.expect(self.uprompt)
        self.sendline("print")
        self.expect(self.uprompt)
        self.sendline('run bootcmd')
Пример #31
0
    def flash_rootfs(self, ROOTFS):
        common.print_bold("\n===== Flashing rootfs =====\n")
        filename = self.prepare_file(ROOTFS)

        size = self.tftp_get_file_uboot(self.uboot_ddr_addr,
                                        filename,
                                        timeout=220)
        self.sendline('mmc part')
        # get offset of ext (83) partition after a fat (0c) partition
        self.expect('0c( Boot)?\r\n\s+\d+\s+(\d+)\s+(\d+).*83\r\n')
        start = hex(int(self.match.groups()[-2]))
        sectors = int(self.match.groups()[-1])
        self.expect(self.uprompt)

        # increase partition size if required
        if (int(size) > (sectors * 512)):
            self.sendline("mmc read %s 0 1" % self.uboot_ddr_addr)
            self.expect(self.uprompt)
            gp2_sz = int(self.uboot_ddr_addr, 16) + int("0x1da", 16)
            self.sendline("mm 0x%08x" % gp2_sz)
            self.expect("%08x: %08x ?" % (gp2_sz, sectors))
            # pad 100M
            self.sendline('0x%08x' % int((int(size) + 104857600) / 512))
            self.sendcontrol('c')
            self.sendcontrol('c')
            self.expect(self.uprompt)
            self.sendline('echo FOO')
            self.expect_exact('echo FOO')
            self.expect_exact('FOO')
            self.expect(self.uprompt)
            self.sendline("mmc write %s 0 1" % self.uboot_ddr_addr)
            self.expect(self.uprompt)
            self.sendline('mmc rescan')
            self.expect(self.uprompt)
            self.sendline('mmc part')
            self.expect(self.uprompt)

        count = hex(int(size / 512))
        self.sendline('mmc erase %s %s' % (start, count))
        self.expect(self.uprompt)
        self.sendline('mmc write %s %s %s' %
                      (self.uboot_ddr_addr, start, count))
        self.expect_exact('mmc write %s %s %s' %
                          (self.uboot_ddr_addr, start, count))
        self.expect(self.uprompt, timeout=480)
Пример #32
0
    def send(self, s):
        if BFT_DEBUG:
            if 'pexpect/__init__.py: sendline():' in error_detect.caller_file_line(
                    3):
                idx = 4
            else:
                idx = 3
            common.print_bold("%s = sending: %s" %
                              (error_detect.caller_file_line(idx), repr(s)))

        if self.delaybetweenchar is not None:
            ret = 0
            for char in s:
                ret += super(BaseDevice, self).send(char)
                time.sleep(self.delaybetweenchar)
            return ret

        return super(BaseDevice, self).send(s)
Пример #33
0
    def boot_linux(self, rootfs=None, bootargs=""):
        common.print_bold("\n===== Booting linux for %s on %s =====" % (self.model, self.root_type))

        self.sendline('fdt addr $fdt_addr')
        self.expect(self.uprompt)
        self.sendline('fdt get value bcm_bootargs /chosen bootargs')
        self.expect(self.uprompt)

        self.sendline('setenv bootargs "$bcm_bootargs %s"' % bootargs)
        self.expect(self.uprompt)

        self.sendline("setenv bootcmd 'fatload mmc 0 ${kernel_addr_r} %s; bootm ${kernel_addr_r} - ${fdt_addr}; booti ${kernel_addr_r} - ${fdt_addr}'" % self.kernel_file)
        self.expect(self.uprompt)
        self.sendline('saveenv')
        self.expect(self.uprompt)
        self.sendline('boot')

        # Linux handles serial better ?
        self.delaybetweenchar = None
Пример #34
0
    def runTest(self):
        wan_ip = wan.get_interface_ipaddr(wan.iface_dut)
        wan.sendline('iperf -s -l 1M -w 1M')
        wan.expect('Server listening on ')

        board.collect_stats(stats=['mpstat'])

        time = 10
        cmd = "iperf -R -c %s -P %s -t 10 -N -w 1M -l 1M | grep SUM"
        # prime the pipes...
        lan.sendline(cmd % (wan_ip, 4))
        lan.expect(prompt)

        prev_con = 0
        prev_failed = 0
        for con_conn in range(32, 513, 16):
            try:
                tstart = datetime.now()
                lan.sendline(cmd % (wan_ip, con_conn))
                failed_cons = 0
                while (datetime.now() - tstart).seconds < (time * 2):
                    timeout=(time*2)-(datetime.now() - tstart).seconds
                    if 0 == lan.expect(['write failed: Connection reset by peer'] + prompt, timeout=timeout):
                        failed_cons += 1
                    else:
                        break
                print_bold("For iperf with %s connections, %s failed...." % (con_conn, failed_cons))
                lan.expect('.*')
                wan.expect('.*')

                board.touch()
                prev_conn = con_conn
                prev_failed = failed_cons

                if con_conn == 512:
                    self.result_message = "iPerf Concurrent passed 512 connections (failed conns = %s)" % failed_cons
            except:
                self.result_message = "iPerf Concurrent Connections failed entirely at %s (failed conns = %s)" % (prev_conn, prev_failed)
                break

        print self.result_message

        self.recover()
    def boot_linux(self, rootfs=None):
        common.print_bold("\n===== Booting linux for %s on %s =====" % (self.model, self.root_type))
        self.reset()
        self.wait_for_boot()

        self.sendline("setenv bootcmd bootipq")
        self.expect(self.uprompt)
        self.sendline("saveenv")
        self.expect(self.uprompt)
        self.sendline("print")
        self.expect(self.uprompt)
        self.sendline('run bootcmd')
        # if run isn't support, we just reset u-boot and
        # let the bootcmd run that way
        try:
            self.expect('Unknown command', timeout=5)
        except:
            pass
        else:
            self.sendline('reset')
Пример #36
0
 def flash_linux(self, KERNEL):
     common.print_bold("\n===== Flashing linux =====\n")
     filename = self.prepare_file(KERNEL)
     self.tftp_get_file_uboot("0x82060000", filename)
     if self.model == "ap135-nand":
         self.sendline('nand erase 0x100000 $filesize')
         self.expect('OK')
         self.expect(self.uprompt)
         self.sendline('nand write.jffs2 0x82060000 0x100000 $filesize')
         self.expect('OK')
         self.expect(self.uprompt)
         return
     self.sendline('erase %s +$filesize' % self.kernel_addr)
     self.expect('Erased .* sectors', timeout=60)
     self.expect(self.uprompt)
     self.sendline('cp.b $fileaddr %s $filesize' % self.kernel_addr)
     self.expect('done', timeout=60)
     self.sendline('cmp.b $fileaddr %s $filesize' % self.kernel_addr)
     self.expect('Total of .* bytes were the same')
     self.expect(self.uprompt)
Пример #37
0
    def boot_linux(self, rootfs=None, bootargs=""):
        common.print_bold("\n===== Booting linux for %s on %s =====" % (self.model, self.root_type))
        self.reset()
        self.wait_for_boot()

        self.sendline("setenv bootcmd bootipq")
        self.expect(self.uprompt)
        self.sendline("saveenv")
        self.expect(self.uprompt)
        self.sendline("print")
        self.expect(self.uprompt)
        self.sendline('run bootcmd')
        # if run isn't support, we just reset u-boot and
        # let the bootcmd run that way
        try:
            self.expect('Unknown command', timeout=5)
        except:
            pass
        else:
            self.sendline('reset')
Пример #38
0
 def flash_linux(self, KERNEL):
     common.print_bold("\n===== Flashing linux =====\n")
     filename = self.prepare_file(KERNEL)
     self.tftp_get_file_uboot("0x82060000", filename)
     if self.model == "ap135-nand":
         self.sendline('nand erase 0x100000 $filesize')
         self.expect('OK')
         self.expect(self.uprompt)
         self.sendline('nand write.jffs2 0x82060000 0x100000 $filesize')
         self.expect('OK')
         self.expect(self.uprompt)
         return
     self.sendline('erase %s +$filesize' % self.kernel_addr)
     self.expect('Erased .* sectors', timeout=60)
     self.expect(self.uprompt)
     self.sendline('cp.b $fileaddr %s $filesize' % self.kernel_addr)
     self.expect('done', timeout=60)
     self.sendline('cmp.b $fileaddr %s $filesize' % self.kernel_addr)
     self.expect('Total of .* bytes were the same')
     self.expect(self.uprompt)
Пример #39
0
    def flash_rootfs(self, ROOTFS):
        common.print_bold("\n===== Flashing rootfs =====\n")
        filename = self.prepare_file(ROOTFS)

        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename, timeout=220)
        self.sendline('mmc part')
        # get offset of ext (83) partition after a fat (0c) partition
        self.expect('0c( Boot)?\r\n\s+\d+\s+(\d+)\s+(\d+).*83\r\n')
        start = hex(int(self.match.groups()[-2]))
        sectors = int(self.match.groups()[-1])
        self.expect(self.uprompt)

        # increase partition size if required
        if (int(size) > (sectors * 512)):
            self.sendline("mmc read %s 0 1" % self.uboot_ddr_addr)
            self.expect(self.uprompt)
            gp2_sz = int(self.uboot_ddr_addr, 16) + int("0x1da", 16)
            self.sendline("mm 0x%08x" % gp2_sz)
            self.expect("%08x: %08x ?" % (gp2_sz, sectors))
            # pad 100M
            self.sendline('0x%08x' % int((int(size) + 104857600) / 512))
            self.sendcontrol('c')
            self.sendcontrol('c')
            self.expect(self.uprompt)
            self.sendline('echo FOO')
            self.expect_exact('echo FOO')
            self.expect_exact('FOO')
            self.expect(self.uprompt)
            self.sendline("mmc write %s 0 1" % self.uboot_ddr_addr)
            self.expect(self.uprompt)
            self.sendline('mmc rescan')
            self.expect(self.uprompt)
            self.sendline('mmc part')
            self.expect(self.uprompt)

        count = hex(int(size/512))
        self.sendline('mmc erase %s %s' % (start, count))
        self.expect(self.uprompt)
        self.sendline('mmc write %s %s %s' % (self.uboot_ddr_addr, start, count))
        self.expect_exact('mmc write %s %s %s' % (self.uboot_ddr_addr, start, count))
        self.expect(self.uprompt, timeout=480)
Пример #40
0
def detect_crashdump_error(console, s):
    if re.findall("Crashdump magic found", s):
        common.print_bold("Crashdump magic found, trying to save data...")

        console.sendcontrol('c')
        console.sendcontrol('c')
        console.sendcontrol('c')
        console.expect('<INTERRUPT>')
        console.expect(console.uprompt)
        console.setup_uboot_network()
        console.sendline("dumpipq_data")

        tftp_progress = "#" * 30
        tftp_start = "TFTP to server"
        tftp_done = "Bytes transferred"
        tftp_expect = [tftp_progress, tftp_start, tftp_done]

        i = -1
        try:
            # this waits until we get the reseting message which means
            # we are done
            while i < 3:
                i = console.expect(tftp_expect +
                                   ["Resetting with watch dog!"] +
                                   console.uprompt)
        except:
            common.print_bold("Crashdump upload failed")
        else:
            common.print_bold("Crashdump upload succeeded")

        # TODO: actually parse data too?
        raise Exception('Crashdump detected')
Пример #41
0
def detect_crashdump_error(console, s):
    if re.findall("Crashdump magic found", s):
        common.print_bold("Crashdump magic found, trying to save data...");

        console.sendcontrol('c')
        console.sendcontrol('c')
        console.sendcontrol('c')
        console.expect('<INTERRUPT>')
        console.expect(console.uprompt)
        console.setup_uboot_network()
        console.sendline("dumpipq_data")

        tftp_progress = "#" * 30
        tftp_start = "TFTP to server"
        tftp_done = "Bytes transferred"
        tftp_expect = [tftp_progress, tftp_start, tftp_done]

        i = -1
        try:
            # this waits until we get the reseting message which means
            # we are done
            while i < 3:
                i = console.expect(tftp_expect +
                        ["Resetting with watch dog!"] + console.uprompt)
        except:
            common.print_bold("Crashdump upload failed")
        else:
            common.print_bold("Crashdump upload succeeded")

        # TODO: actually parse data too?
        raise Exception('Crashdump detected')
Пример #42
0
def main(args):
    # load vocab
    vocab, vocab_inv = load_vocab(args.model_dir)
    vocab_source, vocab_target = vocab
    vocab_inv_source, vocab_inv_target = vocab_inv

    # load textfile
    source_dataset = read_data(args.source_filename, vocab_source)

    print_bold("data	#")
    print("source	{}".format(len(source_dataset)))

    # split into buckets
    source_buckets = make_buckets(source_dataset)
    if args.buckets_limit is not None:
        source_buckets = source_buckets[:args.buckets_limit + 1]
    print_bold("buckets 	#data	(train)")
    for size, data in zip(bucket_sizes, source_buckets):
        print("{} 	{}".format(size, len(data)))
    print_bold("buckets 	#data	(dev)")

    # init
    model = load_model(args.model_dir)
    assert model is not None

    show_source_translation(model, source_buckets, vocab_inv_source,
                            vocab_inv_target)
Пример #43
0
    def boot_linux(self, rootfs=None, bootargs=""):
        common.print_bold("\n===== Booting linux for %s on %s =====" %
                          (self.model, self.root_type))

        self.sendline('fdt addr $fdt_addr')
        self.expect(self.uprompt)
        self.sendline('fdt get value bcm_bootargs /chosen bootargs')
        self.expect(self.uprompt)

        self.sendline('setenv bootargs "$bcm_bootargs %s"' % bootargs)
        self.expect(self.uprompt)

        self.sendline(
            "setenv bootcmd 'fatload mmc 0 ${kernel_addr_r} %s; bootm ${kernel_addr_r} - ${fdt_addr}; booti ${kernel_addr_r} - ${fdt_addr}'"
            % self.kernel_file)
        self.expect(self.uprompt)
        self.sendline('saveenv')
        self.expect(self.uprompt)
        self.sendline('boot')

        # Linux handles serial better ?
        self.delaybetweenchar = None
Пример #44
0
    def flash_uboot(self, uboot):
        '''In this case it's flashing the vfat partition of the bootload.
           Need to have that image u-boot and serial turned on via dtoverlay
           for things to work after flashing'''
        common.print_bold("\n===== Flashing bootloader (and u-boot) =====\n")
        filename = self.prepare_file(uboot)
        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)

        self.sendline('mmc part')
        # get offset of ext (83) partition after a fat (0c) partition
        self.expect('\r\n\s+\d+\s+(\d+)\s+(\d+).*0c( Boot)?\r\n')
        start = hex(int(self.match.groups()[0]))
        if (int(size) != int(self.match.groups()[1]) * 512):
                raise Exception("Partition size does not match, refusing to flash")
        self.expect(self.uprompt)
        count = hex(int(size/512))
        self.sendline('mmc erase %s %s' % (start, count))
        self.expect(self.uprompt)
        self.sendline('mmc write %s %s %s' % (self.uboot_ddr_addr, start, count))
        self.expect(self.uprompt, timeout=120)

        self.reset()
        self.wait_for_boot()
        self.setup_uboot_network()
Пример #45
0
    def expect_helper(self, pattern, wrapper, *args, **kwargs):
        if not BFT_DEBUG:
            return wrapper(pattern, *args, **kwargs)

        common.print_bold("%s = expecting: %s" %
                              (error_detect.caller_file_line(2), repr(pattern)))
        try:
            ret = wrapper(pattern, *args, **kwargs)
            if hasattr(self.match, "group"):
                common.print_bold("%s = matched: %s" %
                                  (error_detect.caller_file_line(1), repr(self.match.group())))
            else:
                common.print_bold("%s = matched: %s" %
                                  (error_detect.caller_file_line(1), repr(pattern)))
            return ret
        except:
            common.print_bold("expired")
            raise
Пример #46
0
    def expect_helper(self, pattern, wrapper, *args, **kwargs):
        if not BFT_DEBUG:
            return wrapper(pattern, *args, **kwargs)

        common.print_bold("%s = expecting: %s" %
                              (error_detect.caller_file_line(2), repr(pattern)))
        try:
            ret = wrapper(pattern, *args, **kwargs)
            if hasattr(self.match, "group"):
                common.print_bold("%s = matched: %s" %
                                  (error_detect.caller_file_line(2), repr(self.match.group())))
            else:
                common.print_bold("%s = matched: %s" %
                                  (error_detect.caller_file_line(2), repr(pattern)))
            return ret
        except:
            common.print_bold("expired")
            raise
Пример #47
0
 def expect(self, *args, **kwargs):
     if BFT_DEBUG:
         common.print_bold("%s = expecting: %s" % (error_detect.caller_file_line(2), repr(args[0])))
     try:
         return super(OpenWrtRouter, self).expect(*args, **kwargs)
     except:
         if not self.in_detect_fatal_error and self.linux_booted:
             self.in_detect_fatal_error = True
             error_detect.detect_fatal_error(self)
             self.in_detect_fatal_error = False
         if BFT_DEBUG:
             common.print_bold("expired")
         raise
     else:
         if BFT_DEBUG:
             common.print_bold("found")
    def flash_rootfs(self, ROOTFS):
        common.print_bold("\n===== Flashing rootfs =====\n")
        filename = self.prepare_file(ROOTFS)

        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
        self.nand_flash_bin(self.rootfs_addr, self.rootfs_size, self.uboot_ddr_addr)
Пример #49
0
    def flash_rootfs(self, ROOTFS):
        common.print_bold("\n===== Flashing rootfs =====\n")
        filename = self.prepare_file(ROOTFS)

        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
        self.spi_flash_bin("0x006b0000", size, self.uboot_ddr_addr, "0x1920000")
Пример #50
0
    def flash_linux(self, KERNEL):
        common.print_bold("\n===== Flashing linux =====\n")
        filename = self.prepare_file(KERNEL)

        size = self.tftp_get_file_uboot(self.uboot_ddr_addr, filename)
        self.spi_flash_bin("0x0062b0000", size, self.uboot_ddr_addr, "0x400000")
Пример #51
0
 def flash_linux(self, KERNEL):
     common.print_bold("\n===== Flashing linux =====\n")
     filename = self.prepare_file(KERNEL)
     self.sendline('tftpboot $defaultLoadAddr %s && nand erase $priKernAddr $priFwSize && nand write $defaultLoadAddr $priKernAddr $filesize' % filename)
     self.expect(self.uprompt)
Пример #52
0
 def boot_linux(self, rootfs=None, bootargs=None):
     common.print_bold("\n===== Booting linux for %s on %s =====" % (self.model, self.root_type))
     self.sendline('npcpu start')
     self.sendline('bootkernel -c %kernel_cmd_line%')
     self.delaybetweenchar = None
Пример #53
0
    def sendcontrol(self, char):
        if BFT_DEBUG:
            common.print_bold("%s = sending: control-%s" %
                              (error_detect.caller_file_line(3), repr(char)))

        return super(BaseDevice, self).sendcontrol(char)
    def flash_linux(self, KERNEL):
        common.print_bold("\n===== Flashing linux =====\n")
        filename = self.prepare_file(KERNEL)

        raise Exception("Kernel is in UBI rootfs, not separate")