def add_floor_sides(locs):
"""We need to replace nodraw textures around the outside of the holes.
This requires looping through all faces, since these will have been
nodrawed.
"""
added_locations = {
barrier.wall.as_tuple(): False
for barrier in
locs
}
for face in conditions.VMF.iter_wfaces(world=True, detail=False):
if face.mat != 'tools/toolsnodraw':
continue
loc = face.get_origin().as_tuple()
if loc in added_locations:
random.seed('floor_side_{}_{}_{}'.format(*loc))
face.mat = random.choice(MATS['squarebeams'])
added_locations[loc] = True
# Swap these to flip the texture diagonally, so the beam is at top
face.uaxis, face.vaxis = face.vaxis, face.uaxis
face.uaxis.offset = 48
vbsp.IGNORED_FACES.add(face)
# Look for the ones without a texture - these are open to the void and
# need to be sealed. The template chamfers the edges
# to prevent showing void at outside corners.
for wall_loc, ceil_loc, rot in locs:
if added_locations[wall_loc.as_tuple()]:
continue
diag_loc = (wall_loc.x, wall_loc.y, wall_loc.z + 128)
temp_data = conditions.import_template(
# If there's a wall surface directly above this point
# or a ceiling brush in the next block over
# we want to use a world brush to seal the leak.
# Otherwise we use the detail version for inside the map.
temp_name=(
FLOOR_TEMP_SIDE_DETAIL if
ceil_loc not in conditions.SOLIDS and
diag_loc not in conditions.SOLIDS
else FLOOR_TEMP_SIDE_WORLD
),
origin=wall_loc,
angles=Vec(0, rot, 0),
)
conditions.retexture_template(
temp_data,
wall_loc,
# Switch to use the configured squarebeams texture
replace_tex={
'anim_wp/framework/squarebeams': random.choice(
MATS['squarebeams']
),
}
)
def add_floor_sides(locs):
"""We need to replace nodraw textures around the outside of the holes.
This requires looping through all faces, since these will have been
nodrawed.
"""
added_locations = {barrier.wall.as_tuple(): False for barrier in locs}
for face in conditions.VMF.iter_wfaces(world=True, detail=False):
if face.mat != 'tools/toolsnodraw':
continue
loc = face.get_origin().as_tuple()
if loc in added_locations:
random.seed('floor_side_{}_{}_{}'.format(*loc))
face.mat = random.choice(MATS['squarebeams'])
added_locations[loc] = True
# Swap these to flip the texture diagonally, so the beam is at top
face.uaxis, face.vaxis = face.vaxis, face.uaxis
face.uaxis.offset = 48
vbsp.IGNORED_FACES.add(face)
# Look for the ones without a texture - these are open to the void and
# need to be sealed. The template chamfers the edges
# to prevent showing void at outside corners.
for wall_loc, ceil_loc, rot in locs:
if added_locations[wall_loc.as_tuple()]:
continue
diag_loc = (wall_loc.x, wall_loc.y, wall_loc.z + 128)
temp_data = conditions.import_template(
# If there's a wall surface directly above this point
# or a ceiling brush in the next block over
# we want to use a world brush to seal the leak.
# Otherwise we use the detail version for inside the map.
temp_name=(FLOOR_TEMP_SIDE_DETAIL
if ceil_loc not in conditions.SOLIDS
and diag_loc not in conditions.SOLIDS else
FLOOR_TEMP_SIDE_WORLD),
origin=wall_loc,
angles=Vec(0, rot, 0),
)
conditions.retexture_template(
temp_data,
wall_loc,
# Switch to use the configured squarebeams texture
replace_tex={
consts.Special.SQUAREBEAMS: random.choice(MATS['squarebeams']),
})
def res_import_template(inst, res):
"""Import a template VMF file, retexturing it to match orientatation.
It will be placed overlapping the given instance.
Options:
- ID: The ID of the template to be inserted.
- force: a space-seperated list of overrides. If 'white' or 'black' is
present, the colour of tiles will be overriden. If a tile size
('2x2', '4x4', 'wall', 'special') is included, all tiles will
be switched to that size (if not a floor/ceiling). If 'world' or
'detail' is present, the brush will be forced to that type.
- replace: A block of template material -> replacement textures.
This is case insensitive - any texture here will not be altered
otherwise.
- replaceBrush: The position of a brush to replace (0 0 0=the surface).
This brush will be removed, and overlays will be fixed to use
all faces with the same normal.
"""
(
temp_id,
replace_tex,
force_colour,
force_grid,
force_type,
replace_brush_pos,
) = res.value
if temp_id not in TEMPLATES:
# The template map is read in after setup is performed, so
# it must be checked here!
# We don't want an error, just quit
LOGGER.warning('"{}" not a valid template!', temp_id)
return
origin = Vec.from_str(inst['origin'])
angles = Vec.from_str(inst['angles', '0 0 0'])
temp_data = conditions.import_template(
temp_id,
origin,
angles,
targetname=inst['targetname', ''],
force_type=force_type,
)
conditions.retexture_template(
temp_data,
origin,
replace_tex,
force_colour,
force_grid,
)
# This is the original brush the template is replacing. We fix overlay
# face IDs, so this brush is replaced by the faces in the template pointing
# the same way.
if replace_brush_pos is None:
return
pos = Vec(replace_brush_pos).rotate(angles.x, angles.y, angles.z)
pos += origin
try:
brush_group = SOLIDS[pos.as_tuple()]
except KeyError:
return
vbsp.VMF.remove_brush(brush_group.solid)
new_ids = []
all_brushes = temp_data.world
if temp_data.detail is not None:
for ent in temp_data.detail:
all_brushes.extend(ent.solids)
for brush in all_brushes: # type: VLib.Solid
for face in brush.sides:
# Only faces pointing the same way!
if face.normal() == brush_group.normal:
# Skip tool brushes (nodraw, player clips..)
if face.mat.casefold().startswith('tools/'):
continue
new_ids.append(str(face.id))
if new_ids:
conditions.reallocate_overlays({
str(brush_group.face.id): new_ids,
})
def res_import_template(inst: Entity, res: Property):
"""Import a template VMF file, retexturing it to match orientatation.
It will be placed overlapping the given instance.
Options:
- ID: The ID of the template to be inserted. Add visgroups to additionally
add after a colon, comma-seperated (temp_id:vis1,vis2)
- force: a space-seperated list of overrides. If 'white' or 'black' is
present, the colour of tiles will be overriden. If 'invert' is
added, white/black tiles will be swapped. If a tile size
('2x2', '4x4', 'wall', 'special') is included, all tiles will
be switched to that size (if not a floor/ceiling). If 'world' or
'detail' is present, the brush will be forced to that type.
- replace: A block of template material -> replacement textures.
This is case insensitive - any texture here will not be altered
otherwise.
- replaceBrush: The position of a brush to replace (0 0 0=the surface).
This brush will be removed, and overlays will be fixed to use
all faces with the same normal. Can alternately be a block:
- Pos: The position to replace.
- additionalIDs: Space-separated list of face IDs in the template
to also fix for overlays. The surface should have close to a
vertical normal, to prevent rescaling the overlay.
- removeBrush: If true, the original brush will not be removed.
- transferOverlay: Allow disabling transferring overlays to this
template. The IDs will be removed instead. (This can be an instvar).
- keys/localkeys: If set, a brush entity will instead be generated with
these values. This overrides force world/detail.
Specially-handled keys:
- "origin", offset automatically.
- "movedir" on func_movelinear - set a normal surrounded by <>,
this gets replaced with angles.
- invertVar or colorVar: If this fixup value is true, tile colour will be
swapped to the opposite of the current force option. If it is set
to 'white' or 'black', that colour will be forced instead.
- visgroup: Sets how vigsrouped parts are handled. If 'none' (default),
they are ignored. If 'choose', one is chosen. If a number, that
is the percentage chance for each visgroup to be added.
"""
(
orig_temp_id,
replace_tex,
force_colour,
force_grid,
force_type,
replace_brush_pos,
rem_replace_brush,
transfer_overlays,
additional_replace_ids,
invert_var,
visgroup_func,
key_block,
) = res.value
temp_id = conditions.resolve_value(inst, orig_temp_id)
temp_name, vis = conditions.parse_temp_name(temp_id)
if temp_name not in TEMPLATES:
# The template map is read in after setup is performed, so
# it must be checked here!
# We don't want an error, just quit
if temp_id != orig_temp_id:
LOGGER.warning('{} -> "{}" is not a valid template!', orig_temp_id,
temp_name)
else:
LOGGER.warning('"{}" is not a valid template!', temp_name)
return
if invert_var != '':
invert_val = inst.fixup[invert_var].casefold()
if invert_val == 'white':
force_colour = conditions.MAT_TYPES.white
elif invert_val == 'black':
force_colour = conditions.MAT_TYPES.black
elif srctools.conv_bool(invert_val):
force_colour = conditions.TEMP_COLOUR_INVERT[force_colour]
origin = Vec.from_str(inst['origin'])
angles = Vec.from_str(inst['angles', '0 0 0'])
temp_data = conditions.import_template(
temp_id,
origin,
angles,
targetname=inst['targetname', ''],
force_type=force_type,
visgroup_choose=visgroup_func,
)
if key_block is not None:
conditions.set_ent_keys(temp_data.detail, inst, key_block)
br_origin = Vec.from_str(key_block.find_key('keys')['origin'])
br_origin.localise(origin, angles)
temp_data.detail['origin'] = br_origin
move_dir = temp_data.detail['movedir', '']
if move_dir.startswith('<') and move_dir.endswith('>'):
move_dir = Vec.from_str(move_dir).rotate(*angles)
temp_data.detail['movedir'] = move_dir.to_angle()
# Add it to the list of ignored brushes, so vbsp.change_brush() doesn't
# modify it.
vbsp.IGNORED_BRUSH_ENTS.add(temp_data.detail)
try:
# This is the original brush the template is replacing. We fix overlay
# face IDs, so this brush is replaced by the faces in the template
# pointing
# the same way.
if replace_brush_pos is None:
raise KeyError # Not set, raise to jump out of the try block
pos = Vec(replace_brush_pos).rotate(angles.x, angles.y, angles.z)
pos += origin
brush_group = SOLIDS[pos.as_tuple()]
except KeyError:
# Not set or solid group doesn't exist, skip..
pass
else:
conditions.steal_from_brush(
temp_data,
brush_group,
rem_replace_brush,
additional_replace_ids,
conv_bool(conditions.resolve_value(inst, transfer_overlays), True),
)
conditions.retexture_template(
temp_data,
origin,
inst.fixup,
replace_tex,
force_colour,
force_grid,
)
def convert_floor(
loc: Vec,
overlay_ids,
mats,
settings,
signage_loc,
detail,
noise_weight,
noise_func: SimplexNoise,
):
"""Cut out tiles at the specified location."""
try:
brush = conditions.SOLIDS[loc.as_tuple()]
except KeyError:
return False # No tile here!
if brush.normal == (0, 0, 1):
# This is a pillar block - there isn't actually tiles here!
# We need to generate a squarebeams brush to fill this gap.
brush.face.mat = 'tools/toolsnodraw' # It won't be visible
temp_data = conditions.import_template(
temp_name=FLOOR_TEMP_PILLAR,
origin=loc,
)
conditions.retexture_template(
temp_data,
loc,
# Switch to use the configured squarebeams texture
replace_tex={
consts.Special.SQUAREBEAMS: random.choice(MATS['squarebeams']),
})
return False
# The new brush IDs overlays need to use
# NOTE: strings, not ints!
ant_locs = overlay_ids[str(brush.face.id)] = []
# Move the floor brush down and switch to the floorbase texture.
for plane in brush.face.planes:
plane.z -= FLOOR_DEPTH
brush.face.mat = random.choice(mats['floorbase'])
loc.x -= 64
loc.y -= 64
for x, y in utils.iter_grid(max_x=4, max_y=4):
tile_loc = loc + (x * 32 + 16, y * 32 + 16, 0)
if tile_loc.as_tuple() in signage_loc:
# Force the tile to be present under signage..
should_make_tile = True
rand = 100
# We don't need to check this again in future!
signage_loc.remove(tile_loc.as_tuple())
else:
# Create a number between 0-100
rand = 100 * get_noise(tile_loc // 32, noise_func) + 10
# Adjust based on the noise_weight value, so boundries have more tiles
rand *= 0.1 + 0.9 * (1 - noise_weight)
should_make_tile = rand < settings['floor_chance']
if random.randint(0, 7) == 0:
# Sometimes there'll be random holes/extra tiles
should_make_tile = not should_make_tile
if should_make_tile:
# Full tile
tile = make_tile(
p1=tile_loc - (16, 16, 0),
p2=tile_loc + (16, 16, -2),
top_mat=vbsp.get_tex(str(brush.color) + '.floor'),
bottom_mat='tools/toolsnodraw',
beam_mat=random.choice(mats['squarebeams']),
)
detail.solids.append(tile.solid)
ant_locs.append(str(tile.top.id))
elif rand < settings['floor_glue_chance']:
# 'Glue' tile - this chance should be higher, making these appear
# bordering the full tiles.
tile = make_tile(
p1=tile_loc - (16, 16, 1),
p2=tile_loc + (16, 16, -2),
top_mat=random.choice(mats['tile_glue']),
bottom_mat='tools/toolsnodraw',
beam_mat=random.choice(mats['squarebeams']),
)
detail.solids.append(tile.solid)
else:
# No tile at this loc!
pass
return True
def res_import_template(inst, res):
"""Import a template VMF file, retexturing it to match orientatation.
It will be placed overlapping the given instance.
Options:
- ID: The ID of the template to be inserted.
- force: a space-seperated list of overrides. If 'white' or 'black' is
present, the colour of tiles will be overriden. If 'invert' is
added, white/black tiles will be swapped. If a tile size
('2x2', '4x4', 'wall', 'special') is included, all tiles will
be switched to that size (if not a floor/ceiling). If 'world' or
'detail' is present, the brush will be forced to that type.
- replace: A block of template material -> replacement textures.
This is case insensitive - any texture here will not be altered
otherwise.
- replaceBrush: The position of a brush to replace (0 0 0=the surface).
This brush will be removed, and overlays will be fixed to use
all faces with the same normal.
- keys/localkeys: If set, a brush entity will instead be generated with
these values. This overrides force world/detail. The origin is
set automatically.
- invertVar: If this fixup value is true, tile colour will be swapped to
the opposite of the current force option. If it is set to
'white' or 'black', that colour will be forced instead.
"""
(
temp_id,
replace_tex,
force_colour,
force_grid,
force_type,
replace_brush_pos,
invert_var,
key_block,
) = res.value
if temp_id not in TEMPLATES:
# The template map is read in after setup is performed, so
# it must be checked here!
# We don't want an error, just quit
LOGGER.warning('"{}" not a valid template!', temp_id)
return
if invert_var != '':
invert_val = inst.fixup[invert_var].casefold()
if invert_val == 'white':
force_colour = conditions.MAT_TYPES.white
elif invert_val == 'black':
force_colour = conditions.MAT_TYPES.black
elif utils.conv_bool(invert_val):
force_colour = conditions.TEMP_COLOUR_INVERT[force_colour]
origin = Vec.from_str(inst['origin'])
angles = Vec.from_str(inst['angles', '0 0 0'])
temp_data = conditions.import_template(
temp_id,
origin,
angles,
targetname=inst['targetname', ''],
force_type=force_type,
)
conditions.retexture_template(
temp_data,
origin,
replace_tex,
force_colour,
force_grid,
)
if key_block is not None:
conditions.set_ent_keys(temp_data.detail, inst, key_block)
br_origin = Vec.from_str(key_block.find_key('keys')['origin'])
br_origin.localise(origin, angles)
temp_data.detail['origin'] = br_origin
# Add it to the list of ignored brushes, so vbsp.change_brush() doesn't
# modify it.
vbsp.IGNORED_BRUSH_ENTS.add(temp_data.detail)
# This is the original brush the template is replacing. We fix overlay
# face IDs, so this brush is replaced by the faces in the template pointing
# the same way.
if replace_brush_pos is None:
return
pos = Vec(replace_brush_pos).rotate(angles.x, angles.y, angles.z)
pos += origin
try:
brush_group = SOLIDS[pos.as_tuple()]
except KeyError:
return
vbsp.VMF.remove_brush(brush_group.solid)
new_ids = []
all_brushes = temp_data.world
# Overlays can't be applied to entities (other than func_detail).
if temp_data.detail is not None and key_block is None:
all_brushes.extend(temp_data.detail.solids)
for brush in all_brushes: # type: VLib.Solid
for face in brush.sides:
# Only faces pointing the same way!
if face.normal() == brush_group.normal:
# Skip tool brushes (nodraw, player clips..)
if face.mat.casefold().startswith('tools/'):
continue
new_ids.append(str(face.id))
if new_ids:
conditions.reallocate_overlays({
str(brush_group.face.id): new_ids,
})
def convert_floor(
loc,
overlay_ids,
mats,
settings,
signage_loc,
detail,
):
"""Cut out tiles at the specified location."""
try:
brush = conditions.SOLIDS[loc.as_tuple()]
except KeyError:
return False # No tile here!
if brush.normal == (0, 0, 1):
# This is a pillar block - there isn't actually tiles here!
# We need to generate a squarebeams brush to fill this gap.
brush.face.mat = 'tools/toolsnodraw' # It won't be visible
temp_data = conditions.import_template(
temp_name=FLOOR_TEMP_PILLAR,
origin=loc,
)
conditions.retexture_template(
temp_data,
loc,
# Switch to use the configured squarebeams texture
replace_tex={
'anim_wp/framework/squarebeams': random.choice(
MATS['squarebeams']
),
}
)
return False
# The new brush IDs overlays need to use
# NOTE: strings, not ints!
ant_locs = overlay_ids[str(brush.face.id)] = []
# Move the floor brush down and switch to the floorbase texture.
for plane in brush.face.planes:
plane.z -= FLOOR_DEPTH
brush.face.mat = random.choice(mats['floorbase'])
loc.x -= 64
loc.y -= 64
random.seed('cutout_tile' + loc.join(' '))
tile_map = [
(random.randint(0, 100) < settings['floor_chance'])
for _ in range(16)
]
for x, y in utils.iter_grid(max_x=4, max_y=4):
tile_loc = loc + (x*32 + 16, y*32 + 16, 0)
if tile_loc.as_tuple() in signage_loc:
should_make_tile = True
# We don't need to check this again in future!
signage_loc.remove(tile_loc.as_tuple())
else:
should_make_tile = tile_map[x*4 + y]
if should_make_tile:
# Full tile
tile = make_tile(
p1=tile_loc - (16, 16, 0),
p2=tile_loc + (16, 16, -2),
top_mat=vbsp.get_tex(str(brush.color) + '.floor'),
bottom_mat='tools/toolsnodraw',
beam_mat=random.choice(mats['squarebeams']),
)
detail.solids.append(tile.solid)
ant_locs.append(str(tile.top.id))
elif random.randint(0, 100) < settings['floor_glue_chance']:
# 'Glue' tile
tile = make_tile(
p1=tile_loc - (16, 16, 1),
p2=tile_loc + (16, 16, -2),
top_mat=random.choice(mats['tile_glue']),
bottom_mat='tools/toolsnodraw',
beam_mat=random.choice(mats['squarebeams']),
)
detail.solids.append(tile.solid)
else:
# No tile at this loc!
pass
return True
def convert_floor(
loc: Vec,
overlay_ids,
mats,
settings,
signage_loc,
detail,
noise_weight,
noise_func: SimplexNoise,
):
"""Cut out tiles at the specified location."""
try:
brush = conditions.SOLIDS[loc.as_tuple()]
except KeyError:
return False # No tile here!
if brush.normal == (0, 0, 1):
# This is a pillar block - there isn't actually tiles here!
# We need to generate a squarebeams brush to fill this gap.
brush.face.mat = 'tools/toolsnodraw' # It won't be visible
temp_data = conditions.import_template(
temp_name=FLOOR_TEMP_PILLAR,
origin=loc,
)
conditions.retexture_template(
temp_data,
loc,
# Switch to use the configured squarebeams texture
replace_tex={
'anim_wp/framework/squarebeams': random.choice(
MATS['squarebeams']
),
}
)
return False
# The new brush IDs overlays need to use
# NOTE: strings, not ints!
ant_locs = overlay_ids[str(brush.face.id)] = []
# Move the floor brush down and switch to the floorbase texture.
for plane in brush.face.planes:
plane.z -= FLOOR_DEPTH
brush.face.mat = random.choice(mats['floorbase'])
loc.x -= 64
loc.y -= 64
for x, y in utils.iter_grid(max_x=4, max_y=4):
tile_loc = loc + (x * 32 + 16, y * 32 + 16, 0)
if tile_loc.as_tuple() in signage_loc:
# Force the tile to be present under signage..
should_make_tile = True
rand = 100
# We don't need to check this again in future!
signage_loc.remove(tile_loc.as_tuple())
else:
# Create a number between 0-100
rand = 100 * get_noise(tile_loc // 32, noise_func) + 10
# Adjust based on the noise_weight value, so boundries have more tiles
rand *= 0.1 + 0.9 * (1 - noise_weight)
should_make_tile = rand < settings['floor_chance']
if random.randint(0, 7) == 0:
# Sometimes there'll be random holes/extra tiles
should_make_tile = not should_make_tile
if should_make_tile:
# Full tile
tile = make_tile(
p1=tile_loc - (16, 16, 0),
p2=tile_loc + (16, 16, -2),
top_mat=vbsp.get_tex(str(brush.color) + '.floor'),
bottom_mat='tools/toolsnodraw',
beam_mat=random.choice(mats['squarebeams']),
)
detail.solids.append(tile.solid)
ant_locs.append(str(tile.top.id))
elif rand < settings['floor_glue_chance']:
# 'Glue' tile - this chance should be higher, making these appear
# bordering the full tiles.
tile = make_tile(
p1=tile_loc - (16, 16, 1),
p2=tile_loc + (16, 16, -2),
top_mat=random.choice(mats['tile_glue']),
bottom_mat='tools/toolsnodraw',
beam_mat=random.choice(mats['squarebeams']),
)
detail.solids.append(tile.solid)
else:
# No tile at this loc!
pass
return True
