def t_configure(self):
'''Runs configure.py if it is present, and either configure.log is missing or -forceConfigure is given'''
if self.argDB['noConfigure']: return
import config.framework
root = self.project.getRoot()
framework = config.framework.Framework(sys.argv[1:])
for arg in ['debugLevel', 'debugSections']:
framework.argDB[arg] = self.argDB[arg]
framework.argDB['log'] = os.path.join(root, 'configure.log')
if not self.configureHeader is None:
framework.header = self.configureHeader
# Load default configure module
try:
framework.addChild(self.getMakeModule(root, 'configure').Configure(framework))
except ImportError:
return
# Run configuration only if the log file was absent or it is forced
if self.argDB['forceConfigure'] or not framework.checkLog(framework.logName):
try:
framework.configure()
except Exception, e:
import traceback
msg = 'CONFIGURATION FAILURE:\n'+str(e)+'\n'
print msg
framework.log.write(msg)
traceback.print_tb(sys.exc_info()[2], file = framework.log)
raise e
framework.storeSubstitutions(self.argDB)
def configure(self, configure_options):
print '==============================================================================='
print ' Configuring ' + self.Project + ' to compile on your system '
print '==============================================================================='
# Arguments passed in take precedence (but don't destroy argv[0])
sys.argv = sys.argv[:1] + configure_options + sys.argv[1:]
self.validateOptions(sys.argv)
self.normalizeOptions(sys.argv)
logMessages = self.systemKludges(sys.argv)
import config.base
import config.framework
import cPickle
framework = None
arch = self.getArch(framework, sys.argv)
try:
framework = config.framework.Framework([
'--configModules=' + self.Project + '.Configure',
'--optionsModule=' + self.Project + '.compilerOptions'
] + sys.argv[1:],
loadArgDB=0)
framework.arch = arch
framework.setup()
framework.logPrint('\n'.join(logMessages))
framework.configure(out=sys.stdout)
framework.storeSubstitutions(framework.argDB)
framework.argDB['configureCache'] = cPickle.dumps(framework)
for i in framework.packages:
if hasattr(i, 'postProcess'):
i.postProcess()
framework.printSummary()
framework.logClear()
framework.closeLog()
try:
self.cleanupLog(framework)
except:
# perhaps print an error about unable to shuffle logs?
pass
return 0
except (RuntimeError, config.base.ConfigureSetupError), e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for details):\n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
def petsc_configure(configure_options):
if 'PETSC_DIR' in os.environ:
petscdir = os.environ['PETSC_DIR']
if petscdir.find(' ') > -1:
raise RuntimeError(
'Your PETSC_DIR ' + petscdir +
' has spaces in it; this is not allowed.\n Change the directory with PETSc to not have spaces in it'
)
if not os.path.isabs(petscdir):
raise RuntimeError(
'PETSC_DIR ("' + petscdir +
'") is set as a relative path. It must be set as an absolute path.'
)
try:
sys.path.append(os.path.join(petscdir, 'lib', 'petsc', 'bin'))
import petscnagupgrade
file = os.path.join(petscdir, '.nagged')
if not petscnagupgrade.naggedtoday(file):
petscnagupgrade.currentversion(petscdir)
except:
pass
print(
'============================================================================================='
)
print(
' Configuring PETSc to compile on your system '
)
print(
'============================================================================================='
)
try:
# Command line arguments take precedence (but don't destroy argv[0])
sys.argv = sys.argv[:1] + configure_options + sys.argv[1:]
check_for_option_mistakes(sys.argv)
check_for_option_changed(sys.argv)
except (TypeError, ValueError) as e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' ERROR in COMMAND LINE ARGUMENT to ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
sys.exit(msg)
# check PETSC_ARCH
check_for_unsupported_combinations(sys.argv)
check_petsc_arch(sys.argv)
check_broken_configure_log_links()
#rename '--enable-' to '--with-'
chkenable()
# support a few standard configure option types
chksynonyms()
# Check for broken cygwin
chkbrokencygwin()
# Disable threads on RHL9
chkrhl9()
# Make sure cygwin-python is used on windows
chkusingwindowspython()
# Threads don't work for cygwin & python...
chkcygwinpython()
chkcygwinlink()
chkdosfiles()
chkcygwinwindowscompilers()
chktmpnoexec()
for l in range(1, len(sys.argv)):
if sys.argv[l].startswith('--with-fc=') and sys.argv[l].endswith(
'nagfor'):
# need a way to save this value and later CC so that petscnagfor may use them
name = sys.argv[l].split('=')[1]
sys.argv[l] = '--with-fc=' + os.path.join(
os.path.abspath('.'), 'lib', 'petsc', 'bin', 'petscnagfor')
break
# Should be run from the toplevel
configDir = os.path.abspath('config')
bsDir = os.path.join(configDir, 'BuildSystem')
if not os.path.isdir(configDir):
raise RuntimeError('Run configure from $PETSC_DIR, not ' +
os.path.abspath('.'))
sys.path.insert(0, bsDir)
sys.path.insert(0, configDir)
import config.base
import config.framework
import pickle
import traceback
# Check Cray without modules
check_cray_modules()
tbo = None
framework = None
try:
framework = config.framework.Framework([
'--configModules=PETSc.Configure',
'--optionsModule=config.compilerOptions'
] + sys.argv[1:],
loadArgDB=0)
framework.setup()
framework.logPrint('\n'.join(extraLogs))
framework.configure(out=sys.stdout)
framework.storeSubstitutions(framework.argDB)
framework.argDB['configureCache'] = pickle.dumps(framework)
framework.printSummary()
framework.argDB.save(force=True)
framework.logClear()
print_final_timestamp(framework)
framework.closeLog()
try:
move_configure_log(framework)
except:
# perhaps print an error about unable to shuffle logs?
pass
return 0
except (RuntimeError, config.base.ConfigureSetupError) as e:
tbo = sys.exc_info()[2]
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for details):\n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except (TypeError, ValueError) as e:
# this exception is automatically deleted by Python so we need to save it to print below
tbo = sys.exc_info()[2]
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' TypeError or ValueError possibly related to ERROR in COMMAND LINE ARGUMENT while running ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except ImportError as e:
# this exception is automatically deleted by Python so we need to save it to print below
tbo = sys.exc_info()[2]
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' ImportError while runing ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except OSError as e:
tbo = sys.exc_info()[2]
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' OSError while running ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except SystemExit as e:
tbo = sys.exc_info()[2]
if e.code is None or e.code == 0:
return
if e.code == 10:
sys.exit(10)
msg ='*******************************************************************************\n'\
+' CONFIGURATION FAILURE (Please send configure.log to [email protected])\n' \
+'*******************************************************************************\n'
se = str(e)
except Exception as e:
tbo = sys.exc_info()[2]
msg ='*******************************************************************************\n'\
+' CONFIGURATION CRASH (Please send configure.log to [email protected])\n' \
+'*******************************************************************************\n'
se = str(e)
print(msg)
if not framework is None:
framework.logClear()
if hasattr(framework, 'log'):
try:
if hasattr(framework, 'compilerDefines'):
framework.log.write('**** Configure header ' +
framework.compilerDefines + ' ****\n')
framework.outputHeader(framework.log)
if hasattr(framework, 'compilerFixes'):
framework.log.write('**** C specific Configure header ' +
framework.compilerFixes + ' ****\n')
framework.outputCHeader(framework.log)
except Exception as e:
framework.log.write('Problem writing headers to log: ' +
str(e))
try:
framework.log.write(msg + se)
traceback.print_tb(tbo, file=framework.log)
print_final_timestamp(framework)
if hasattr(framework, 'log'): framework.log.close()
move_configure_log(framework)
except Exception as e:
print(
'Error printing error message from exception or printing the traceback:'
+ str(e))
traceback.print_tb(sys.exc_info()[2])
sys.exit(1)
else:
print(se)
traceback.print_tb(tbo)
else:
print(se)
traceback.print_tb(tbo)
if hasattr(framework, 'log'): framework.log.close()
self.executeTest(self.configureConversion)
self.executeTest(self.configureMPI2)
self.executeTest(self.configureTypes)
self.executeTest(self.configureMPITypes)
self.executeTest(self.configureMissingPrototypes)
self.executeTest(self.SGIMPICheck)
self.executeTest(self.CxxMPICheck)
self.executeTest(self.FortranMPICheck)
self.executeTest(self.configureIO)
if self.libraries.check(
self.dlib, "MPI_Alltoallw") and self.libraries.check(
self.dlib, "MPI_Type_create_indexed_block"):
self.addDefine('HAVE_MPI_ALLTOALLW', 1)
if self.libraries.check(self.dlib, "MPI_Comm_spawn"):
self.addDefine('HAVE_MPI_COMM_SPAWN', 1)
if self.libraries.check(self.dlib, "MPI_Win_create"):
self.addDefine('HAVE_MPI_WIN_CREATE', 1)
if self.libraries.check(self.dlib, "MPI_Finalized"):
self.addDefine('HAVE_MPI_FINALIZED', 1)
if __name__ == '__main__':
import config.framework
import sys
framework = config.framework.Framework(sys.argv[1:])
framework.setupLogging(framework.clArgs)
framework.children.append(Configure(framework))
framework.configure()
framework.dumpSubstitutions()
self.addDefine('HAVE_MPI_ALLTOALLW',1)
if self.libraries.check(self.dlib, "MPI_Win_create"):
self.addDefine('HAVE_MPI_WIN_CREATE',1)
self.addDefine('HAVE_MPI_REPLACE',1) # MPI_REPLACE is strictly for use with the one-sided function MPI_Accumulate
funcs = '''MPI_Comm_spawn MPI_Type_get_envelope MPI_Type_get_extent MPI_Type_dup MPI_Init_thread
MPIX_Iallreduce MPI_Iallreduce MPI_Ibarrier MPI_Finalized MPI_Exscan'''.split()
for f in funcs:
if self.libraries.check(self.dlib, f):
self.addDefine('HAVE_' + f.upper(),1)
oldFlags = self.compilers.CPPFLAGS # Disgusting save and restore
self.compilers.CPPFLAGS += ' '+self.headers.toString(self.include)
if self.checkCompile('#include <mpi.h>', 'int combiner = MPI_COMBINER_DUP;'):
self.addDefine('HAVE_MPI_COMBINER_DUP',1)
self.compilers.CPPFLAGS = oldFlags
if self.libraries.check(self.dlib, "MPIDI_CH3I_sock_set"):
self.addDefine('HAVE_MPICH_CH3_SOCK', 1)
if self.libraries.check(self.dlib, "MPIDI_CH3I_sock_fixed_nbc_progress"):
# Indicates that this bug was fixed: http://trac.mpich.org/projects/mpich/ticket/1785
self.addDefine('HAVE_MPICH_CH3_SOCK_FIXED_NBC_PROGRESS', 1)
if __name__ == '__main__':
import config.framework
import sys
framework = config.framework.Framework(sys.argv[1:])
framework.setupLogging(framework.clArgs)
framework.children.append(Configure(framework))
framework.configure()
framework.dumpSubstitutions()
configDir = os.path.abspath('config')
bsDir = os.path.join(configDir, 'BuildSystem')
if not os.path.isdir(configDir):
raise RuntimeError('Run configure from $PETSC_DIR, not '+os.path.abspath('.'))
sys.path.insert(0, bsDir)
sys.path.insert(0, configDir)
import config.base
import config.framework
import cPickle
framework = None
try:
framework = config.framework.Framework(['--configModules=PETSc.Configure','--optionsModule=config.compilerOptions']+sys.argv[1:], loadArgDB = 0)
framework.setup()
framework.logPrint('\n'.join(extraLogs))
framework.configure(out = sys.stdout)
framework.storeSubstitutions(framework.argDB)
framework.argDB['configureCache'] = cPickle.dumps(framework)
framework.printSummary()
framework.argDB.save(force = True)
framework.logClear()
print_final_timestamp(framework)
framework.closeLog()
try:
move_configure_log(framework)
except:
# perhaps print an error about unable to shuffle logs?
pass
return 0
except (RuntimeError, config.base.ConfigureSetupError), e:
emsg = str(e)
sys.path.insert(0, bsDir)
sys.path.insert(0, configDir)
import config.base
import config.framework
import cPickle
framework = None
try:
framework = config.framework.Framework([
'--configModules=PETSc.Configure',
'--optionsModule=config.compilerOptions'
] + sys.argv[1:],
loadArgDB=0)
framework.setup()
framework.logPrint('\n'.join(extraLogs))
framework.configure(out=sys.stdout)
framework.storeSubstitutions(framework.argDB)
framework.argDB['configureCache'] = cPickle.dumps(framework)
framework.printSummary()
framework.argDB.save(force=True)
framework.logClear()
print_final_timestamp(framework)
framework.closeLog()
try:
move_configure_log(framework)
except:
# perhaps print an error about unable to shuffle logs?
pass
return 0
except (RuntimeError, config.base.ConfigureSetupError), e:
emsg = str(e)
def petsc_configure(configure_options):
print '==============================================================================='
print ' Configuring PETSc to compile on your system '
print '==============================================================================='
# Command line arguments take precedence (but don't destroy argv[0])
sys.argv = sys.argv[:1] + configure_options + sys.argv[1:]
check_for_option_mistakes(sys.argv)
# check PETSC_ARCH
check_petsc_arch(sys.argv)
check_broken_configure_log_links()
# support a few standard configure option types
for l in range(0, len(sys.argv)):
name = sys.argv[l]
if name.find('enable-') >= 0:
if name.find('=') == -1:
sys.argv[l] = name.replace('enable-', 'with-') + '=1'
else:
head, tail = name.split('=', 1)
sys.argv[l] = head.replace('enable-', 'with-') + '=' + tail
if name.find('disable-') >= 0:
if name.find('=') == -1:
sys.argv[l] = name.replace('disable-', 'with-') + '=0'
else:
head, tail = name.split('=', 1)
if tail == '1': tail = '0'
sys.argv[l] = head.replace('disable-', 'with-') + '=' + tail
if name.find('without-') >= 0:
if name.find('=') == -1:
sys.argv[l] = name.replace('without-', 'with-') + '=0'
else:
head, tail = name.split('=', 1)
if tail == '1': tail = '0'
sys.argv[l] = head.replace('without-', 'with-') + '=' + tail
# Check for broken cygwin
chkbrokencygwin()
# Disable threads on RHL9
chkrhl9()
# Make sure cygwin-python is used on windows
chkusingwindowspython()
# Threads don't work for cygwin & python-2.4, 2.5 etc..
chkcygwinpythonver()
chkcygwinlink()
# Should be run from the toplevel
configDir = os.path.abspath('config')
bsDir = os.path.join(configDir, 'BuildSystem')
if not os.path.isdir(configDir):
raise RuntimeError('Run configure from $PETSC_DIR, not ' +
os.path.abspath('.'))
if not os.path.isdir(bsDir):
print '==============================================================================='
print '''++ Could not locate BuildSystem in %s.''' % configDir
print '''++ Downloading it using "hg clone http://hg.mcs.anl.gov/petsc/BuildSystem %s"''' % bsDir
print '==============================================================================='
(status, output) = commands.getstatusoutput(
'hg clone http://petsc.cs.iit.edu/petsc/BuildSystem ' + bsDir)
if status:
if output.find('ommand not found') >= 0:
print '==============================================================================='
print '''** Unable to locate hg (Mercurial) to download BuildSystem; make sure hg is'''
print '''** in your path or manually copy BuildSystem to $PETSC_DIR/config/BuildSystem'''
print '''** from a machine where you do have hg installed and can clone BuildSystem. '''
print '==============================================================================='
elif output.find('Cannot resolve host') >= 0:
print '==============================================================================='
print '''** Unable to download BuildSystem. You must be off the network.'''
print '''** Connect to the internet and run config/configure.py again.'''
print '==============================================================================='
else:
print '==============================================================================='
print '''** Unable to download BuildSystem. Please send this message to [email protected]'''
print '==============================================================================='
print output
sys.exit(3)
sys.path.insert(0, bsDir)
sys.path.insert(0, configDir)
import config.base
import config.framework
import cPickle
framework = None
try:
framework = config.framework.Framework([
'--configModules=PETSc.Configure',
'--optionsModule=PETSc.compilerOptions'
] + sys.argv[1:],
loadArgDB=0)
framework.setup()
framework.logPrint('\n'.join(extraLogs))
framework.configure(out=sys.stdout)
framework.storeSubstitutions(framework.argDB)
framework.argDB['configureCache'] = cPickle.dumps(framework)
import PETSc.packages
for i in framework.packages:
if hasattr(i, 'postProcess'):
i.postProcess()
framework.printSummary()
framework.logClear()
framework.closeLog()
try:
move_configure_log(framework)
except:
# perhaps print an error about unable to shuffle logs?
pass
return 0
except (RuntimeError, config.base.ConfigureSetupError), e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for details):\n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
def configure(self, configure_options):
print(
'==============================================================================='
)
print(' Configuring ' + self.Project +
' to compile on your system ')
print(
'==============================================================================='
)
# Arguments passed in take precedence (but don't destroy argv[0])
sys.argv = sys.argv[:1] + configure_options + sys.argv[1:]
self.validateOptions(sys.argv)
self.normalizeOptions(sys.argv)
logMessages = self.systemKludges(sys.argv)
import config.base
import config.framework
import pickle
framework = None
arch = self.getArch(framework, sys.argv)
try:
framework = config.framework.Framework([
'--configModules=' + self.Project + '.Configure',
'--optionsModule=' + self.Project + '.compilerOptions'
] + sys.argv[1:],
loadArgDB=0)
framework.arch = arch
framework.setup()
framework.logPrint('\n'.join(logMessages))
framework.configure(out=sys.stdout)
framework.storeSubstitutions(framework.argDB)
framework.argDB['configureCache'] = pickle.dumps(framework)
for i in framework.packages:
if hasattr(i, 'postProcess'):
i.postProcess()
framework.printSummary()
framework.logClear()
framework.closeLog()
try:
self.cleanupLog(framework)
except:
# perhaps print an error about unable to shuffle logs?
pass
return 0
except (RuntimeError, config.base.ConfigureSetupError) as e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for details):\n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except (TypeError, ValueError) as e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' ERROR in COMMAND LINE ARGUMENT to ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except ImportError as e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' UNABLE to FIND MODULE for ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except OSError as e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg + '\n'
msg ='*******************************************************************************\n'\
+' UNABLE to EXECUTE BINARIES for ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except SystemExit as e:
if e.code is None or e.code == 0:
return
msg ='*******************************************************************************\n'\
+' CONFIGURATION FAILURE (Please send configure.log to the Amanzi developers)\n' \
+'*******************************************************************************\n'
se = str(e)
except Exception as e:
msg ='*******************************************************************************\n'\
+' CONFIGURATION CRASH (Please send configure.log to the Amanzi developers)\n' \
+'*******************************************************************************\n'
se = str(e)
print(msg)
if framework is not None:
framework.logClear()
if hasattr(framework, 'log'):
import traceback
try:
framework.log.write(msg + se)
traceback.print_tb(sys.exc_info()[2], file=framework.log)
framework.log.close()
self.cleanupLog(framework)
except:
pass
sys.exit(1)
else:
print(se)
import traceback
traceback.print_tb(sys.exc_info()[2])
return
def petsc_configure(configure_options):
print '==============================================================================='
print ' Configuring PETSc to compile on your system '
print '==============================================================================='
# Command line arguments take precedence (but don't destroy argv[0])
sys.argv = sys.argv[:1] + configure_options + sys.argv[1:]
check_for_option_mistakes(sys.argv)
# check PETSC_ARCH
check_petsc_arch(sys.argv)
check_broken_configure_log_links()
# support a few standard configure option types
for l in range(0,len(sys.argv)):
name = sys.argv[l]
if name.find('enable-') >= 0:
if name.find('=') == -1:
sys.argv[l] = name.replace('enable-','with-')+'=1'
else:
head, tail = name.split('=', 1)
sys.argv[l] = head.replace('enable-','with-')+'='+tail
if name.find('disable-') >= 0:
if name.find('=') == -1:
sys.argv[l] = name.replace('disable-','with-')+'=0'
else:
head, tail = name.split('=', 1)
if tail == '1': tail = '0'
sys.argv[l] = head.replace('disable-','with-')+'='+tail
if name.find('without-') >= 0:
if name.find('=') == -1:
sys.argv[l] = name.replace('without-','with-')+'=0'
else:
head, tail = name.split('=', 1)
if tail == '1': tail = '0'
sys.argv[l] = head.replace('without-','with-')+'='+tail
# Check for broken cygwin
chkbrokencygwin()
# Disable threads on RHL9
chkrhl9()
# Make sure cygwin-python is used on windows
chkusingwindowspython()
# Threads don't work for cygwin & python-2.4, 2.5 etc..
chkcygwinpythonver()
chkcygwinlink()
# Should be run from the toplevel
configDir = os.path.abspath('config')
bsDir = os.path.join(configDir, 'BuildSystem')
if not os.path.isdir(configDir):
raise RuntimeError('Run configure from $PETSC_DIR, not '+os.path.abspath('.'))
if not os.path.isdir(bsDir):
print '==============================================================================='
print '''++ Could not locate BuildSystem in %s.''' % configDir
print '''++ Downloading it using "hg clone http://hg.mcs.anl.gov/petsc/BuildSystem %s"''' % bsDir
print '==============================================================================='
(status,output) = commands.getstatusoutput('hg clone http://petsc.cs.iit.edu/petsc/BuildSystem '+ bsDir)
if status:
if output.find('ommand not found') >= 0:
print '==============================================================================='
print '''** Unable to locate hg (Mercurial) to download BuildSystem; make sure hg is'''
print '''** in your path or manually copy BuildSystem to $PETSC_DIR/config/BuildSystem'''
print '''** from a machine where you do have hg installed and can clone BuildSystem. '''
print '==============================================================================='
elif output.find('Cannot resolve host') >= 0:
print '==============================================================================='
print '''** Unable to download BuildSystem. You must be off the network.'''
print '''** Connect to the internet and run config/configure.py again.'''
print '==============================================================================='
else:
print '==============================================================================='
print '''** Unable to download BuildSystem. Please send this message to [email protected]'''
print '==============================================================================='
print output
sys.exit(3)
sys.path.insert(0, bsDir)
sys.path.insert(0, configDir)
import config.base
import config.framework
import cPickle
framework = None
try:
framework = config.framework.Framework(['--configModules=PETSc.Configure','--optionsModule=PETSc.compilerOptions']+sys.argv[1:], loadArgDB = 0)
framework.setup()
framework.logPrint('\n'.join(extraLogs))
framework.configure(out = sys.stdout)
framework.storeSubstitutions(framework.argDB)
framework.argDB['configureCache'] = cPickle.dumps(framework)
import PETSc.packages
for i in framework.packages:
if hasattr(i,'postProcess'):
i.postProcess()
framework.printSummary()
framework.logClear()
framework.closeLog()
try:
move_configure_log(framework)
except:
# perhaps print an error about unable to shuffle logs?
pass
return 0
except (RuntimeError, config.base.ConfigureSetupError), e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg+'\n'
msg ='*******************************************************************************\n'\
+' UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for details):\n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
def petsc_configure(configure_options):
if 'PETSC_DIR' in os.environ:
petscdir = os.environ['PETSC_DIR']
if petscdir.find(' ') > -1:
raise RuntimeError('Your PETSC_DIR '+petscdir+' has spaces in it; this is not allowed.\n Change the directory with PETSc to not have spaces in it')
try:
sys.path.append(os.path.join(petscdir,'lib','petsc','bin'))
import petscnagupgrade
file = os.path.join(petscdir,'.nagged')
if not petscnagupgrade.naggedtoday(file):
petscnagupgrade.currentversion(petscdir)
except:
pass
print('===============================================================================')
print(' Configuring PETSc to compile on your system ')
print('===============================================================================')
try:
# Command line arguments take precedence (but don't destroy argv[0])
sys.argv = sys.argv[:1] + configure_options + sys.argv[1:]
check_for_option_mistakes(sys.argv)
check_for_option_changed(sys.argv)
except (TypeError, ValueError) as e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg+'\n'
msg ='*******************************************************************************\n'\
+' ERROR in COMMAND LINE ARGUMENT to ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
sys.exit(msg)
# check PETSC_ARCH
check_for_unsupported_combinations(sys.argv)
check_petsc_arch(sys.argv)
check_broken_configure_log_links()
#rename '--enable-' to '--with-'
chkenable()
# support a few standard configure option types
chksynonyms()
# Check for broken cygwin
chkbrokencygwin()
# Disable threads on RHL9
chkrhl9()
# Make sure cygwin-python is used on windows
chkusingwindowspython()
# Threads don't work for cygwin & python...
chkcygwinpython()
chkcygwinlink()
chkdosfiles()
# Should be run from the toplevel
configDir = os.path.abspath('config')
bsDir = os.path.join(configDir, 'BuildSystem')
if not os.path.isdir(configDir):
raise RuntimeError('Run configure from $PETSC_DIR, not '+os.path.abspath('.'))
sys.path.insert(0, bsDir)
sys.path.insert(0, configDir)
import config.base
import config.framework
import pickle
framework = None
try:
framework = config.framework.Framework(['--configModules=PETSc.Configure','--optionsModule=config.compilerOptions']+sys.argv[1:], loadArgDB = 0)
framework.setup()
framework.logPrint('\n'.join(extraLogs))
framework.configure(out = sys.stdout)
framework.storeSubstitutions(framework.argDB)
framework.argDB['configureCache'] = pickle.dumps(framework)
framework.printSummary()
framework.argDB.save(force = True)
framework.logClear()
print_final_timestamp(framework)
framework.closeLog()
try:
move_configure_log(framework)
except:
# perhaps print an error about unable to shuffle logs?
pass
return 0
except (RuntimeError, config.base.ConfigureSetupError) as e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg+'\n'
msg ='*******************************************************************************\n'\
+' UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for details):\n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except (TypeError, ValueError) as e:
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg+'\n'
msg ='*******************************************************************************\n'\
+' ERROR in COMMAND LINE ARGUMENT to ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except ImportError as e :
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg+'\n'
msg ='*******************************************************************************\n'\
+' UNABLE to FIND MODULE for ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except OSError as e :
emsg = str(e)
if not emsg.endswith('\n'): emsg = emsg+'\n'
msg ='*******************************************************************************\n'\
+' UNABLE to EXECUTE BINARIES for ./configure \n' \
+'-------------------------------------------------------------------------------\n' \
+emsg+'*******************************************************************************\n'
se = ''
except SystemExit as e:
if e.code is None or e.code == 0:
return
if e.code is 10:
sys.exit(10)
msg ='*******************************************************************************\n'\
+' CONFIGURATION FAILURE (Please send configure.log to [email protected])\n' \
+'*******************************************************************************\n'
se = str(e)
except Exception as e:
msg ='*******************************************************************************\n'\
+' CONFIGURATION CRASH (Please send configure.log to [email protected])\n' \
+'*******************************************************************************\n'
se = str(e)
print(msg)
if not framework is None:
framework.logClear()
if hasattr(framework, 'log'):
try:
if hasattr(framework,'compilerDefines'):
framework.log.write('**** Configure header '+framework.compilerDefines+' ****\n')
framework.outputHeader(framework.log)
if hasattr(framework,'compilerFixes'):
framework.log.write('**** C specific Configure header '+framework.compilerFixes+' ****\n')
framework.outputCHeader(framework.log)
except Exception as e:
framework.log.write('Problem writing headers to log: '+str(e))
import traceback
try:
framework.log.write(msg+se)
traceback.print_tb(sys.exc_info()[2], file = framework.log)
print_final_timestamp(framework)
if hasattr(framework,'log'): framework.log.close()
move_configure_log(framework)
except:
pass
sys.exit(1)
else:
print(se)
import traceback
traceback.print_tb(sys.exc_info()[2])
if hasattr(framework,'log'): framework.log.close()