def change_torrent(self, ids, timeout=None, **kwargs):
"""
Change torrent parameters for the torrent(s) with the supplied id's. The
parameters are:
============================ ===== =============== =======================================================================================
Argument RPC Replaced by Description
============================ ===== =============== =======================================================================================
``bandwidthPriority`` 5 - Priority for this transfer.
``downloadLimit`` 5 - Set the speed limit for download in Kib/s.
``downloadLimited`` 5 - Enable download speed limiter.
``files_unwanted`` 1 - A list of file id's that shouldn't be downloaded.
``files_wanted`` 1 - A list of file id's that should be downloaded.
``honorsSessionLimits`` 5 - Enables or disables the transfer to honour the upload limit set in the session.
``location`` 1 - Local download location.
``peer_limit`` 1 - The peer limit for the torrents.
``priority_high`` 1 - A list of file id's that should have high priority.
``priority_low`` 1 - A list of file id's that should have normal priority.
``priority_normal`` 1 - A list of file id's that should have low priority.
``queuePosition`` 14 - Position of this transfer in its queue.
``seedIdleLimit`` 10 - Seed inactivity limit in minutes.
``seedIdleMode`` 10 - Seed inactivity mode. 0 = Use session limit, 1 = Use transfer limit, 2 = Disable limit.
``seedRatioLimit`` 5 - Seeding ratio.
``seedRatioMode`` 5 - Which ratio to use. 0 = Use session limit, 1 = Use transfer limit, 2 = Disable limit.
``speed_limit_down`` 1 - 5 downloadLimit Set the speed limit for download in Kib/s.
``speed_limit_down_enabled`` 1 - 5 downloadLimited Enable download speed limiter.
``speed_limit_up`` 1 - 5 uploadLimit Set the speed limit for upload in Kib/s.
``speed_limit_up_enabled`` 1 - 5 uploadLimited Enable upload speed limiter.
``trackerAdd`` 10 - Array of string with announce URLs to add.
``trackerRemove`` 10 - Array of ids of trackers to remove.
``trackerReplace`` 10 - Array of (id, url) tuples where the announce URL should be replaced.
``uploadLimit`` 5 - Set the speed limit for upload in Kib/s.
``uploadLimited`` 5 - Enable upload speed limiter.
============================ ===== =============== =======================================================================================
.. NOTE::
transmissionrpc will try to automatically fix argument errors.
"""
args = {}
for key, value in iteritems(kwargs):
argument = make_rpc_name(key)
(arg, val) = argument_value_convert('torrent-set', argument, value,
self.rpc_version)
args[arg] = val
if len(args) > 0:
self._request('torrent-set', args, ids, True, timeout=timeout)
else:
ValueError("No arguments to set")
def change_torrent(self, ids, timeout=None, **kwargs):
"""
Change torrent parameters for the torrent(s) with the supplied id's. The
parameters are:
============================ ===== =============== =======================================================================================
Argument RPC Replaced by Description
============================ ===== =============== =======================================================================================
``bandwidthPriority`` 5 - Priority for this transfer.
``downloadLimit`` 5 - Set the speed limit for download in Kib/s.
``downloadLimited`` 5 - Enable download speed limiter.
``files_unwanted`` 1 - A list of file id's that shouldn't be downloaded.
``files_wanted`` 1 - A list of file id's that should be downloaded.
``honorsSessionLimits`` 5 - Enables or disables the transfer to honour the upload limit set in the session.
``location`` 1 - Local download location.
``peer_limit`` 1 - The peer limit for the torrents.
``priority_high`` 1 - A list of file id's that should have high priority.
``priority_low`` 1 - A list of file id's that should have normal priority.
``priority_normal`` 1 - A list of file id's that should have low priority.
``queuePosition`` 14 - Position of this transfer in its queue.
``seedIdleLimit`` 10 - Seed inactivity limit in minutes.
``seedIdleMode`` 10 - Seed inactivity mode. 0 = Use session limit, 1 = Use transfer limit, 2 = Disable limit.
``seedRatioLimit`` 5 - Seeding ratio.
``seedRatioMode`` 5 - Which ratio to use. 0 = Use session limit, 1 = Use transfer limit, 2 = Disable limit.
``speed_limit_down`` 1 - 5 downloadLimit Set the speed limit for download in Kib/s.
``speed_limit_down_enabled`` 1 - 5 downloadLimited Enable download speed limiter.
``speed_limit_up`` 1 - 5 uploadLimit Set the speed limit for upload in Kib/s.
``speed_limit_up_enabled`` 1 - 5 uploadLimited Enable upload speed limiter.
``trackerAdd`` 10 - Array of string with announce URLs to add.
``trackerRemove`` 10 - Array of ids of trackers to remove.
``trackerReplace`` 10 - Array of (id, url) tuples where the announce URL should be replaced.
``uploadLimit`` 5 - Set the speed limit for upload in Kib/s.
``uploadLimited`` 5 - Enable upload speed limiter.
============================ ===== =============== =======================================================================================
.. NOTE::
transmissionrpc will try to automatically fix argument errors.
"""
args = {}
for key, value in iteritems(kwargs):
argument = make_rpc_name(key)
(arg, val) = argument_value_convert('torrent-set' , argument, value, self.rpc_version)
args[arg] = val
if len(args) > 0:
self._request('torrent-set', args, ids, True, timeout=timeout)
else:
ValueError("No arguments to set")
def add(self, data, timeout=None, **kwargs):
"""
.. WARNING::
Deprecated, please use add_torrent.
"""
args = {}
if data:
args = {'metainfo': data}
elif 'metainfo' not in kwargs and 'filename' not in kwargs:
raise ValueError('No torrent data or torrent uri.')
for key, value in iteritems(kwargs):
argument = make_rpc_name(key)
(arg, val) = argument_value_convert('torrent-add', argument, value, self.rpc_version)
args[arg] = val
warnings.warn('add has been deprecated, please use add_torrent instead.', DeprecationWarning)
return self._request('torrent-add', args, timeout=timeout)
def add(self, data, timeout=None, **kwargs):
"""
.. WARNING::
Deprecated, please use add_torrent.
"""
args = {}
if data:
args = {'metainfo': data}
elif 'metainfo' not in kwargs and 'filename' not in kwargs:
raise ValueError('No torrent data or torrent uri.')
for key, value in iteritems(kwargs):
argument = make_rpc_name(key)
(arg, val) = argument_value_convert('torrent-add', argument, value,
self.rpc_version)
args[arg] = val
warnings.warn(
'add has been deprecated, please use add_torrent instead.',
DeprecationWarning)
return self._request('torrent-add', args, timeout=timeout)
def set_session(self, timeout=None, **kwargs):
"""
Set session parameters. The parameters are:
================================ ===== ================= ==========================================================================================================================
Argument RPC Replaced by Description
================================ ===== ================= ==========================================================================================================================
``alt_speed_down`` 5 - Alternate session download speed limit (in Kib/s).
``alt_speed_enabled`` 5 - Enables alternate global download speed limiter.
``alt_speed_time_begin`` 5 - Time when alternate speeds should be enabled. Minutes after midnight.
``alt_speed_time_day`` 5 - Enables alternate speeds scheduling these days.
``alt_speed_time_enabled`` 5 - Enables alternate speeds scheduling.
``alt_speed_time_end`` 5 - Time when alternate speeds should be disabled. Minutes after midnight.
``alt_speed_up`` 5 - Alternate session upload speed limit (in Kib/s).
``blocklist_enabled`` 5 - Enables the block list
``blocklist_url`` 11 - Location of the block list. Updated with blocklist-update.
``cache_size_mb`` 10 - The maximum size of the disk cache in MB
``dht_enabled`` 6 - Enables DHT.
``download_dir`` 1 - Set the session download directory.
``download_queue_enabled`` 14 - Enables download queue.
``download_queue_size`` 14 - Number of slots in the download queue.
``encryption`` 1 - Set the session encryption mode, one of ``required``, ``preferred`` or ``tolerated``.
``idle_seeding_limit`` 10 - The default seed inactivity limit in minutes.
``idle_seeding_limit_enabled`` 10 - Enables the default seed inactivity limit
``incomplete_dir`` 7 - The path to the directory of incomplete transfer data.
``incomplete_dir_enabled`` 7 - Enables the incomplete transfer data directory. Otherwise data for incomplete transfers are stored in the download target.
``lpd_enabled`` 9 - Enables local peer discovery for public torrents.
``peer_limit`` 1 - 5 peer-limit-global Maximum number of peers.
``peer_limit_global`` 5 - Maximum number of peers.
``peer_limit_per_torrent`` 5 - Maximum number of peers per transfer.
``peer_port`` 5 - Peer port.
``peer_port_random_on_start`` 5 - Enables randomized peer port on start of Transmission.
``pex_allowed`` 1 - 5 pex-enabled Allowing PEX in public torrents.
``pex_enabled`` 5 - Allowing PEX in public torrents.
``port`` 1 - 5 peer-port Peer port.
``port_forwarding_enabled`` 1 - Enables port forwarding.
``queue_stalled_enabled`` 14 - Enable tracking of stalled transfers.
``queue_stalled_minutes`` 14 - Number of minutes of idle that marks a transfer as stalled.
``rename_partial_files`` 8 - Appends ".part" to incomplete files
``script_torrent_done_enabled`` 9 - Whether or not to call the "done" script.
``script_torrent_done_filename`` 9 - Filename of the script to run when the transfer is done.
``seed_queue_enabled`` 14 - Enables upload queue.
``seed_queue_size`` 14 - Number of slots in the upload queue.
``seedRatioLimit`` 5 - Seed ratio limit. 1.0 means 1:1 download and upload ratio.
``seedRatioLimited`` 5 - Enables seed ration limit.
``speed_limit_down`` 1 - Download speed limit (in Kib/s).
``speed_limit_down_enabled`` 1 - Enables download speed limiting.
``speed_limit_up`` 1 - Upload speed limit (in Kib/s).
``speed_limit_up_enabled`` 1 - Enables upload speed limiting.
``start_added_torrents`` 9 - Added torrents will be started right away.
``trash_original_torrent_files`` 9 - The .torrent file of added torrents will be deleted.
``utp_enabled`` 13 - Enables Micro Transport Protocol (UTP).
================================ ===== ================= ==========================================================================================================================
.. NOTE::
transmissionrpc will try to automatically fix argument errors.
"""
args = {}
for key, value in iteritems(kwargs):
if key == 'encryption' and value not in ['required', 'preferred', 'tolerated']:
raise ValueError('Invalid encryption value')
argument = make_rpc_name(key)
(arg, val) = argument_value_convert('session-set' , argument, value, self.rpc_version)
args[arg] = val
if len(args) > 0:
self._request('session-set', args, timeout=timeout)
def add_torrent(self, torrent, timeout=None, **kwargs):
"""
Add torrent to transfers list. Takes a uri to a torrent or base64 encoded torrent data in ``torrent``.
Additional arguments are:
===================== ===== =========== =============================================================
Argument RPC Replaced by Description
===================== ===== =========== =============================================================
``bandwidthPriority`` 8 - Priority for this transfer.
``cookies`` 13 - One or more HTTP cookie(s).
``download_dir`` 1 - The directory where the downloaded contents will be saved in.
``files_unwanted`` 1 - A list of file id's that shouldn't be downloaded.
``files_wanted`` 1 - A list of file id's that should be downloaded.
``paused`` 1 - If True, does not start the transfer when added.
``peer_limit`` 1 - Maximum number of peers allowed.
``priority_high`` 1 - A list of file id's that should have high priority.
``priority_low`` 1 - A list of file id's that should have low priority.
``priority_normal`` 1 - A list of file id's that should have normal priority.
===================== ===== =========== =============================================================
Returns a Torrent object with the fields.
"""
if torrent is None:
raise ValueError('add_torrent requires data or a URI.')
torrent_data = None
parsed_uri = urlparse(torrent)
if parsed_uri.scheme in ['ftp', 'ftps', 'http', 'https']:
# there has been some problem with T's built in torrent fetcher,
# use a python one instead
torrent_file = urlopen(torrent)
torrent_data = torrent_file.read()
torrent_data = base64.b64encode(torrent_data).decode('utf-8')
if parsed_uri.scheme in ['file']:
filepath = torrent
# uri decoded different on linux / windows ?
if len(parsed_uri.path) > 0:
filepath = parsed_uri.path
elif len(parsed_uri.netloc) > 0:
filepath = parsed_uri.netloc
torrent_file = open(filepath, 'rb')
torrent_data = torrent_file.read()
torrent_data = base64.b64encode(torrent_data).decode('utf-8')
if not torrent_data:
if torrent.endswith('.torrent') or torrent.startswith('magnet:'):
torrent_data = None
else:
might_be_base64 = False
try:
# check if this is base64 data
if PY3:
base64.b64decode(torrent.encode('utf-8'))
else:
base64.b64decode(torrent)
might_be_base64 = True
except Exception:
pass
if might_be_base64:
torrent_data = torrent
args = {}
if torrent_data:
args = {'metainfo': torrent_data}
else:
args = {'filename': torrent}
for key, value in iteritems(kwargs):
argument = make_rpc_name(key)
(arg, val) = argument_value_convert('torrent-add', argument, value, self.rpc_version)
args[arg] = val
return list(self._request('torrent-add', args, timeout=timeout).values())[0]
def set_session(self, timeout=None, **kwargs):
"""
Set session parameters. The parameters are:
================================ ===== ================= ==========================================================================================================================
Argument RPC Replaced by Description
================================ ===== ================= ==========================================================================================================================
``alt_speed_down`` 5 - Alternate session download speed limit (in Kib/s).
``alt_speed_enabled`` 5 - Enables alternate global download speed limiter.
``alt_speed_time_begin`` 5 - Time when alternate speeds should be enabled. Minutes after midnight.
``alt_speed_time_day`` 5 - Enables alternate speeds scheduling these days.
``alt_speed_time_enabled`` 5 - Enables alternate speeds scheduling.
``alt_speed_time_end`` 5 - Time when alternate speeds should be disabled. Minutes after midnight.
``alt_speed_up`` 5 - Alternate session upload speed limit (in Kib/s).
``blocklist_enabled`` 5 - Enables the block list
``blocklist_url`` 11 - Location of the block list. Updated with blocklist-update.
``cache_size_mb`` 10 - The maximum size of the disk cache in MB
``dht_enabled`` 6 - Enables DHT.
``download_dir`` 1 - Set the session download directory.
``download_queue_enabled`` 14 - Enables download queue.
``download_queue_size`` 14 - Number of slots in the download queue.
``encryption`` 1 - Set the session encryption mode, one of ``required``, ``preferred`` or ``tolerated``.
``idle_seeding_limit`` 10 - The default seed inactivity limit in minutes.
``idle_seeding_limit_enabled`` 10 - Enables the default seed inactivity limit
``incomplete_dir`` 7 - The path to the directory of incomplete transfer data.
``incomplete_dir_enabled`` 7 - Enables the incomplete transfer data directory. Otherwise data for incomplete transfers are stored in the download target.
``lpd_enabled`` 9 - Enables local peer discovery for public torrents.
``peer_limit`` 1 - 5 peer-limit-global Maximum number of peers.
``peer_limit_global`` 5 - Maximum number of peers.
``peer_limit_per_torrent`` 5 - Maximum number of peers per transfer.
``peer_port`` 5 - Peer port.
``peer_port_random_on_start`` 5 - Enables randomized peer port on start of Transmission.
``pex_allowed`` 1 - 5 pex-enabled Allowing PEX in public torrents.
``pex_enabled`` 5 - Allowing PEX in public torrents.
``port`` 1 - 5 peer-port Peer port.
``port_forwarding_enabled`` 1 - Enables port forwarding.
``queue_stalled_enabled`` 14 - Enable tracking of stalled transfers.
``queue_stalled_minutes`` 14 - Number of minutes of idle that marks a transfer as stalled.
``rename_partial_files`` 8 - Appends ".part" to incomplete files
``script_torrent_done_enabled`` 9 - Whether or not to call the "done" script.
``script_torrent_done_filename`` 9 - Filename of the script to run when the transfer is done.
``seed_queue_enabled`` 14 - Enables upload queue.
``seed_queue_size`` 14 - Number of slots in the upload queue.
``seedRatioLimit`` 5 - Seed ratio limit. 1.0 means 1:1 download and upload ratio.
``seedRatioLimited`` 5 - Enables seed ration limit.
``speed_limit_down`` 1 - Download speed limit (in Kib/s).
``speed_limit_down_enabled`` 1 - Enables download speed limiting.
``speed_limit_up`` 1 - Upload speed limit (in Kib/s).
``speed_limit_up_enabled`` 1 - Enables upload speed limiting.
``start_added_torrents`` 9 - Added torrents will be started right away.
``trash_original_torrent_files`` 9 - The .torrent file of added torrents will be deleted.
``utp_enabled`` 13 - Enables Micro Transport Protocol (UTP).
================================ ===== ================= ==========================================================================================================================
.. NOTE::
transmissionrpc will try to automatically fix argument errors.
"""
args = {}
for key, value in iteritems(kwargs):
if key == 'encryption' and value not in [
'required', 'preferred', 'tolerated'
]:
raise ValueError('Invalid encryption value')
argument = make_rpc_name(key)
(arg, val) = argument_value_convert('session-set', argument, value,
self.rpc_version)
args[arg] = val
if len(args) > 0:
self._request('session-set', args, timeout=timeout)
def add_torrent(self, torrent, timeout=None, **kwargs):
"""
Add torrent to transfers list. Takes a uri to a torrent or base64 encoded torrent data in ``torrent``.
Additional arguments are:
===================== ===== =========== =============================================================
Argument RPC Replaced by Description
===================== ===== =========== =============================================================
``bandwidthPriority`` 8 - Priority for this transfer.
``cookies`` 13 - One or more HTTP cookie(s).
``download_dir`` 1 - The directory where the downloaded contents will be saved in.
``files_unwanted`` 1 - A list of file id's that shouldn't be downloaded.
``files_wanted`` 1 - A list of file id's that should be downloaded.
``paused`` 1 - If True, does not start the transfer when added.
``peer_limit`` 1 - Maximum number of peers allowed.
``priority_high`` 1 - A list of file id's that should have high priority.
``priority_low`` 1 - A list of file id's that should have low priority.
``priority_normal`` 1 - A list of file id's that should have normal priority.
===================== ===== =========== =============================================================
Returns a Torrent object with the fields.
"""
if torrent is None:
raise ValueError('add_torrent requires data or a URI.')
torrent_data = None
parsed_uri = urlparse(torrent)
if parsed_uri.scheme in ['ftp', 'ftps', 'http', 'https']:
# there has been some problem with T's built in torrent fetcher,
# use a python one instead
torrent_file = urlopen(torrent)
torrent_data = torrent_file.read()
torrent_data = base64.b64encode(torrent_data).decode('utf-8')
if parsed_uri.scheme in ['file']:
filepath = torrent
# uri decoded different on linux / windows ?
if len(parsed_uri.path) > 0:
filepath = parsed_uri.path
elif len(parsed_uri.netloc) > 0:
filepath = parsed_uri.netloc
torrent_file = open(filepath, 'rb')
torrent_data = torrent_file.read()
torrent_data = base64.b64encode(torrent_data).decode('utf-8')
if not torrent_data:
if torrent.endswith('.torrent') or torrent.startswith('magnet:'):
torrent_data = None
else:
might_be_base64 = False
try:
# check if this is base64 data
if PY3:
base64.b64decode(torrent.encode('utf-8'))
else:
base64.b64decode(torrent)
might_be_base64 = True
except Exception:
pass
if might_be_base64:
torrent_data = torrent
args = {}
if torrent_data:
args = {'metainfo': torrent_data}
else:
args = {'filename': torrent}
for key, value in iteritems(kwargs):
argument = make_rpc_name(key)
(arg, val) = argument_value_convert('torrent-add', argument, value,
self.rpc_version)
args[arg] = val
return list(
self._request('torrent-add', args, timeout=timeout).values())[0]