Пример #1
0
    def parse_string(self, contents:str)->HTS:
        '''
        Parses a string representation of an initial state file
        '''
        hts = HTS("INIT")
        ts = TS("TS INIT")

        init = []

        for line in contents.split('\n'):
            line = line.strip()
            if not line:
                continue
            else:
                res = self.parse_line(line)
                if res is not None:
                    init.append(res)

        Logger.msg("Initial state file set concrete values for {} state variables".format(len(init)), 1)

        ts.init = And(init)
        ts.invar = TRUE()
        ts.trans = TRUE()
        hts.add_ts(ts)

        return hts
Пример #2
0
    def parse_string(self, lines):

        [none, var, state, input, output, init, invar, trans,
         ftrans] = range(9)
        section = none

        inits = TRUE()
        invars = TRUE()
        transs = TRUE()
        ftranss = {}

        sparser = StringParser()

        count = 0
        vars = set([])
        states = set([])
        inputs = set([])
        outputs = set([])
        invar_props = []
        ltl_props = []

        for line in lines:
            count += 1

            if (line.strip() in ["", "\n"]) or line[0] == T_COM:
                continue

            if T_VAR == line[:len(T_VAR)]:
                section = var
                continue

            if T_STATE == line[:len(T_STATE)]:
                section = state
                continue

            if T_INPUT == line[:len(T_INPUT)]:
                section = input
                continue

            if T_OUTPUT == line[:len(T_OUTPUT)]:
                section = output
                continue

            if T_INIT == line[:len(T_INIT)]:
                section = init
                continue

            if T_INVAR == line[:len(T_INVAR)]:
                section = invar
                continue

            if T_TRANS == line[:len(T_TRANS)]:
                section = trans
                continue

            if T_FTRANS == line[:len(T_FTRANS)]:
                section = ftrans
                continue

            if section in [var, state, input, output]:
                varname, vartype = line[:-2].replace(" ", "").split(":")
                if varname[0] == "'":
                    varname = varname[1:-1]
                vartype = parse_typestr(vartype)
                vardef = self._define_var(varname, vartype)

                vars.add(vardef)
                if section == state:
                    states.add(vardef)
                if section == input:
                    inputs.add(vardef)
                if section == output:
                    outputs.add(vardef)

            if section in [init, invar, trans]:
                line = line.replace(T_SC, "").strip()
                qline = quote_names(line, replace_ops=False)

            if section == init:
                inits = And(inits, sparser.parse_formula(qline))

            if section == invar:
                invars = And(invars, sparser.parse_formula(qline))

            if section == trans:
                transs = And(transs, sparser.parse_formula(qline))

            if section == ftrans:
                strvar = line[:line.find(":=")]
                var = sparser.parse_formula(
                    quote_names(strvar, replace_ops=False))
                cond_ass = line[line.find(":=") + 2:].strip()
                ftranss[var] = []

                for cond_as in cond_ass.split("{"):
                    if cond_as == "":
                        continue
                    cond = cond_as[:cond_as.find(",")]
                    ass = cond_as[cond_as.find(",") + 1:cond_as.find("}")]
                    ftranss[var].append((sparser.parse_formula(
                        quote_names(cond, replace_ops=False)),
                                         sparser.parse_formula(
                                             quote_names(ass,
                                                         replace_ops=False))))

        hts = HTS("STS")
        ts = TS()

        ts.vars = vars
        ts.state_vars = states
        ts.input_vars = inputs
        ts.output_vars = outputs
        ts.init = inits
        ts.invar = invars
        ts.trans = transs
        ts.ftrans = ftranss

        hts.add_ts(ts)

        return (hts, invar_props, ltl_props)
Пример #3
0
    def generate_HTS(self, module, modulesdic):
        hts = HTS(module.name)
        ts = TS("TS %s" % module.name)

        init = []
        trans = []
        invar = []
        params = []

        sparser = StringParser()

        (vars, states, inputs,
         outputs) = self._collect_sub_variables(module,
                                                modulesdic,
                                                path=[],
                                                varlist=[],
                                                statelist=[],
                                                inputlist=[],
                                                outputlist=[])

        for var in vars:
            ts.add_var(self._define_var(var, module.name))

        for var in states:
            ts.add_state_var(self._define_var(var, module.name))

        for var in inputs:
            ts.add_input_var(self._define_var(var, module.name))

        for var in outputs:
            ts.add_output_var(self._define_var(var, module.name))

        self._check_parameters(module, modulesdic, ts.vars)

        for par in module.pars:
            assert len(par) == 2, "Expecting a variable"
            hts.add_param(self._define_var((par[0], par[1]), module.name))

        for init_s in module.init:
            formula = sparser.parse_formula(quote_names(init_s, module.name),
                                            False)
            init.append(formula)

        for invar_s in module.invar:
            formula = sparser.parse_formula(quote_names(invar_s, module.name),
                                            False)
            invar.append(formula)

        for trans_s in module.trans:
            formula = sparser.parse_formula(quote_names(trans_s, module.name),
                                            False)
            trans.append(formula)

        for sub in module.subs:
            hts.add_sub(sub[0],
                        self.generate_HTS(modulesdic[sub[1]], modulesdic),
                        tuple([v[0] for v in sub[2]]))

        ts.init = And(init)
        ts.invar = And(invar)
        ts.trans = And(trans)

        hts.add_ts(ts)

        return hts
Пример #4
0
    def parse_string(self, strinput):

        hts = HTS()
        ts = TS()

        nodemap = {}
        node_covered = set([])

        # list of tuples of var and cond_assign_list
        # cond_assign_list is tuples of (condition, value)
        # where everything is a pysmt FNode
        # for btor, the condition is always True
        ftrans = []

        initlist = []
        invarlist = []

        invar_props = []
        ltl_props = []

        prop_count = 0

        # clean string input, remove special characters from names
        for sc, rep in special_char_replacements.items():
            strinput = strinput.replace(sc, rep)

        def getnode(nid):
            node_covered.add(nid)
            if int(nid) < 0:
                return Ite(BV2B(nodemap[str(-int(nid))]), BV(0,1), BV(1,1))
            return nodemap[nid]

        def binary_op(bvop, bop, left, right):
            if (get_type(left) == BOOL) and (get_type(right) == BOOL):
                return bop(left, right)
            return bvop(B2BV(left), B2BV(right))

        def unary_op(bvop, bop, left):
            if (get_type(left) == BOOL):
                return bop(left)
            return bvop(left)

        for line in strinput.split(NL):
            linetok = line.split()
            if len(linetok) == 0:
                continue
            if linetok[0] == COM:
                continue

            (nid, ntype, *nids) = linetok

            if ntype == SORT:
                (stype, *attr) = nids
                if stype == BITVEC:
                    nodemap[nid] = BVType(int(attr[0]))
                    node_covered.add(nid)
                if stype == ARRAY:
                    nodemap[nid] = ArrayType(getnode(attr[0]), getnode(attr[1]))
                    node_covered.add(nid)

            if ntype == WRITE:
                nodemap[nid] = Store(*[getnode(n) for n in nids[1:4]])

            if ntype == READ:
                nodemap[nid] = Select(getnode(nids[1]), getnode(nids[2]))

            if ntype == ZERO:
                nodemap[nid] = BV(0, getnode(nids[0]).width)

            if ntype == ONE:
                nodemap[nid] = BV(1, getnode(nids[0]).width)

            if ntype == ONES:
                width = getnode(nids[0]).width
                nodemap[nid] = BV((2**width)-1, width)

            if ntype == REDOR:
                width = get_type(getnode(nids[1])).width
                zeros = BV(0, width)
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), zeros))

            if ntype == REDXOR:
                width = get_type(getnode(nids[1])).width
                nodemap[nid] = BV(0, width)
                zeros = BV(0, width)
                for yx_i in range(width):
                  tmp = BV(1 << yx_i, width)
                  tmp_2 = BVAnd(tmp, B2BV(getnode(nids[1])))
                  tmp_3 = BVZExt(B2BV(BVComp(tmp_2, zeros)), int(width - 1))
                  nodemap[nid] = BVAdd(tmp_3, nodemap[nid])
                nodemap[nid] = BVComp(BVAnd(BV(1, width), nodemap[nid]), BV(1, width))

            if ntype == REDAND:
                width = get_type(getnode(nids[1])).width
                ones = BV((2**width)-1, width)
                nodemap[nid] = BVComp(getnode(nids[1]), ones)

            if ntype == CONSTD:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(int(nids[1]), width)

            if ntype == CONST:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(bin_to_dec(nids[1]), width)

            if ntype == STATE:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN%nid), getnode(nids[0]))
                ts.add_state_var(nodemap[nid])

            if ntype == INPUT:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN%nid), getnode(nids[0]))
                ts.add_input_var(nodemap[nid])

            if ntype == OUTPUT:
                # unfortunately we need to create an extra symbol just to have the output name
                # we could be smarter about this, but then this parser can't be greedy
                original_symbol = getnode(nids[0])
                output_symbol = Symbol(nids[1], original_symbol.get_type())
                nodemap[nid] = EqualsOrIff(output_symbol, original_symbol)
                invarlist.append(nodemap[nid])
                node_covered.add(nid)
                ts.add_output_var(output_symbol)

            if ntype == AND:
                nodemap[nid] = binary_op(BVAnd, And, getnode(nids[1]), getnode(nids[2]))

            if ntype == CONCAT:
                nodemap[nid] = BVConcat(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == XOR:
                nodemap[nid] = binary_op(BVXor, Xor, getnode(nids[1]), getnode(nids[2]))

            if ntype == XNOR:
                nodemap[nid] = BVNot(binary_op(BVXor, Xor, getnode(nids[1]), getnode(nids[2])))

            if ntype == NAND:
                bvop = lambda x,y: BVNot(BVAnd(x, y))
                bop = lambda x,y: Not(And(x, y))
                nodemap[nid] = binary_op(bvop, bop, getnode(nids[1]), getnode(nids[2]))

            if ntype == IMPLIES:
                nodemap[nid] = BVOr(BVNot(getnode(nids[1])), getnode(nids[2]))

            if ntype == NOT:
                nodemap[nid] = unary_op(BVNot, Not, getnode(nids[1]))

            if ntype == NEG:
                nodemap[nid] = unary_op(BVNeg, Not, getnode(nids[1]))

            if ntype == UEXT:
                nodemap[nid] = BVZExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == SEXT:
                nodemap[nid] = BVSExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == OR:
                nodemap[nid] = binary_op(BVOr, Or, getnode(nids[1]), getnode(nids[2]))

            if ntype == ADD:
                nodemap[nid] = BVAdd(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SUB:
                nodemap[nid] = BVSub(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == UGT:
                nodemap[nid] = BVUGT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == UGTE:
                nodemap[nid] = BVUGE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == ULT:
                nodemap[nid] = BVULT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == ULTE:
                nodemap[nid] = BVULE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SGT:
                nodemap[nid] = BVSGT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SGTE:
                nodemap[nid] = BVSGE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SLT:
                nodemap[nid] = BVSLT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SLTE:
                nodemap[nid] = BVSLE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == EQ:
                nodemap[nid] = BVComp(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == NEQ:
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), getnode(nids[2])))

            if ntype == MUL:
                nodemap[nid] = BVMul(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SLICE:
                nodemap[nid] = BVExtract(B2BV(getnode(nids[1])), int(nids[3]), int(nids[2]))

            if ntype == SLL:
                nodemap[nid] = BVLShl(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRA:
                nodemap[nid] = BVAShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRL:
                nodemap[nid] = BVLShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == ITE:
                if (get_type(getnode(nids[2])) == BOOL) or (get_type(getnode(nids[3])) == BOOL):
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])), B2BV(getnode(nids[2])), B2BV(getnode(nids[3])))
                else:
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])), getnode(nids[2]), getnode(nids[3]))

            if ntype == NEXT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(getnode(nids[2])) == BOOL):
                    lval = TS.get_prime(getnode(nids[1]))
                    rval = BV2B(getnode(nids[2]))
                else:
                    lval = TS.get_prime(getnode(nids[1]))
                    rval = getnode(nids[2])

                nodemap[nid] = EqualsOrIff(lval, rval)

                ftrans.append(
                     (lval,
                     [(TRUE(), rval)])
                )

            if ntype == INIT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(getnode(nids[2])) == BOOL):
                    nodemap[nid] = EqualsOrIff(BV2B(getnode(nids[1])), BV2B(getnode(nids[2])))
                else:
                    nodemap[nid] = EqualsOrIff(getnode(nids[1]), getnode(nids[2]))
                initlist.append(getnode(nid))

            if ntype == CONSTRAINT:
                nodemap[nid] = BV2B(getnode(nids[0]))
                invarlist.append(getnode(nid))

            if ntype == BAD:
                nodemap[nid] = getnode(nids[0])

                if ASSERTINFO in line:
                    filename_lineno = os.path.basename(nids[3])
                    assert_name = 'embedded_assertion_%s'%filename_lineno
                    description = "Embedded assertion at line {1} in {0}".format(*filename_lineno.split(COLON_REP))
                else:
                    assert_name = 'embedded_assertion_%i'%prop_count
                    description = 'Embedded assertion number %i'%prop_count
                    prop_count += 1

                # Following problem format (name, description, strformula)
                invar_props.append((assert_name, description, Not(BV2B(getnode(nid)))))

            if nid not in nodemap:
                Logger.error("Unknown node type \"%s\""%ntype)

            # get wirename if it exists
            if ntype not in {STATE, INPUT, OUTPUT, BAD}:
                # check for wirename, if it's an integer, then it's a node ref
                try:
                    a = int(nids[-1])
                except:
                    try:
                        wire = Symbol(str(nids[-1]), getnode(nids[0]))
                        invarlist.append(EqualsOrIff(wire, B2BV(nodemap[nid])))
                        ts.add_var(wire)
                    except:
                        pass

        if Logger.level(1):
            name = lambda x: str(nodemap[x]) if nodemap[x].is_symbol() else x
            uncovered = [name(x) for x in nodemap if x not in node_covered]
            uncovered.sort()
            if len(uncovered) > 0:
                Logger.warning("Unlinked nodes \"%s\""%",".join(uncovered))

        if not self.symbolic_init:
            init = simplify(And(initlist))
        else:
            init = TRUE()

        invar = simplify(And(invarlist))

        # instead of trans, we're using the ftrans format -- see below
        ts.set_behavior(init, TRUE(), invar)

        # add ftrans
        for var, cond_assign_list in ftrans:
            ts.add_func_trans(var, cond_assign_list)

        hts.add_ts(ts)

        return (hts, invar_props, ltl_props)
Пример #5
0
    def parse_string(self, strinput):

        hts = HTS()
        ts = TS()

        nodemap = {}
        node_covered = set([])

        # list of tuples of var and cond_assign_list
        # cond_assign_list is tuples of (condition, value)
        # where everything is a pysmt FNode
        # for btor, the condition is always True
        ftrans = []

        initlist = []
        invarlist = []

        invar_props = []
        ltl_props = []

        prop_count = 0

        # clean string input, remove special characters from names
        for sc, rep in special_char_replacements.items():
            strinput = strinput.replace(sc, rep)

        def getnode(nid):
            node_covered.add(nid)
            if int(nid) < 0:
                return Ite(BV2B(nodemap[str(-int(nid))]), BV(0, 1), BV(1, 1))
            return nodemap[nid]

        def binary_op(bvop, bop, left, right):
            if (get_type(left) == BOOL) and (get_type(right) == BOOL):
                return bop(left, right)
            return bvop(B2BV(left), B2BV(right))

        def unary_op(bvop, bop, left):
            if (get_type(left) == BOOL):
                return bop(left)
            return bvop(left)

        for line in strinput.split(NL):
            linetok = line.split()
            if len(linetok) == 0:
                continue
            if linetok[0] == COM:
                continue

            (nid, ntype, *nids) = linetok

            if ntype == SORT:
                (stype, *attr) = nids
                if stype == BITVEC:
                    nodemap[nid] = BVType(int(attr[0]))
                    node_covered.add(nid)
                if stype == ARRAY:
                    nodemap[nid] = ArrayType(getnode(attr[0]),
                                             getnode(attr[1]))
                    node_covered.add(nid)

            if ntype == WRITE:
                nodemap[nid] = Store(*[getnode(n) for n in nids[1:4]])

            if ntype == READ:
                nodemap[nid] = Select(getnode(nids[1]), getnode(nids[2]))

            if ntype == ZERO:
                nodemap[nid] = BV(0, getnode(nids[0]).width)

            if ntype == ONE:
                nodemap[nid] = BV(1, getnode(nids[0]).width)

            if ntype == ONES:
                width = getnode(nids[0]).width
                nodemap[nid] = BV((2**width) - 1, width)

            if ntype == REDOR:
                width = get_type(getnode(nids[1])).width
                zeros = BV(0, width)
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), zeros))

            if ntype == REDAND:
                width = get_type(getnode(nids[1])).width
                ones = BV((2**width) - 1, width)
                nodemap[nid] = BVComp(getnode(nids[1]), ones)

            if ntype == CONSTD:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(int(nids[1]), width)

            if ntype == CONST:
                width = getnode(nids[0]).width
                try:
                    nodemap[nid] = BV(bin_to_dec(nids[1]), width)
                except ValueError:
                    if not all([i == 'x' or i == 'z' for i in nids[1]]):
                        raise RuntimeError(
                            "If not a valid number, only support "
                            "all don't cares or high-impedance but got {}".
                            format(nids[1]))
                    # create a fresh variable for this non-deterministic constant
                    nodemap[nid] = Symbol('const_' + nids[1], BVType(width))
                    ts.add_state_var(nodemap[nid])
                    Logger.warning(
                        "Creating a fresh symbol for unsupported X/Z constant %s"
                        % nids[1])

            if ntype == STATE:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN % nid), getnode(nids[0]))
                ts.add_state_var(nodemap[nid])

            if ntype == INPUT:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN % nid), getnode(nids[0]))
                ts.add_input_var(nodemap[nid])

            if ntype == OUTPUT:
                # unfortunately we need to create an extra symbol just to have the output name
                # we could be smarter about this, but then this parser can't be greedy
                original_symbol = B2BV(getnode(nids[0]))
                output_symbol = Symbol(nids[1], original_symbol.get_type())
                nodemap[nid] = EqualsOrIff(output_symbol, original_symbol)
                invarlist.append(nodemap[nid])
                node_covered.add(nid)
                ts.add_output_var(output_symbol)

            if ntype == AND:
                nodemap[nid] = binary_op(BVAnd, And, getnode(nids[1]),
                                         getnode(nids[2]))

            if ntype == CONCAT:
                nodemap[nid] = BVConcat(B2BV(getnode(nids[1])),
                                        B2BV(getnode(nids[2])))

            if ntype == XOR:
                nodemap[nid] = binary_op(BVXor, Xor, getnode(nids[1]),
                                         getnode(nids[2]))

            if ntype == XNOR:
                nodemap[nid] = BVNot(
                    binary_op(BVXor, Xor, getnode(nids[1]), getnode(nids[2])))

            if ntype == NAND:
                bvop = lambda x, y: BVNot(BVAnd(x, y))
                bop = lambda x, y: Not(And(x, y))
                nodemap[nid] = binary_op(bvop, bop, getnode(nids[1]),
                                         getnode(nids[2]))

            if ntype == IMPLIES:
                nodemap[nid] = BVOr(BVNot(getnode(nids[1])), getnode(nids[2]))

            if ntype == NOT:
                nodemap[nid] = unary_op(BVNot, Not, getnode(nids[1]))

            if ntype == NEG:
                nodemap[nid] = unary_op(BVNeg, Not, getnode(nids[1]))

            if ntype == UEXT:
                nodemap[nid] = BVZExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == SEXT:
                nodemap[nid] = BVSExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == OR:
                nodemap[nid] = binary_op(BVOr, Or, getnode(nids[1]),
                                         getnode(nids[2]))

            if ntype == ADD:
                nodemap[nid] = BVAdd(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SUB:
                nodemap[nid] = BVSub(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == UGT:
                nodemap[nid] = BVUGT(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == UGTE:
                nodemap[nid] = BVUGE(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == ULT:
                nodemap[nid] = BVULT(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == ULTE:
                nodemap[nid] = BVULE(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SGT:
                nodemap[nid] = BVSGT(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SGTE:
                nodemap[nid] = BVSGE(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SLT:
                nodemap[nid] = BVSLT(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SLTE:
                nodemap[nid] = BVSLE(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == EQ:
                nodemap[nid] = BVComp(B2BV(getnode(nids[1])),
                                      B2BV(getnode(nids[2])))

            if ntype == NEQ:
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]),
                                            getnode(nids[2])))

            if ntype == MUL:
                nodemap[nid] = BVMul(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SLICE:
                nodemap[nid] = BVExtract(B2BV(getnode(nids[1])), int(nids[3]),
                                         int(nids[2]))

            if ntype == SLL:
                nodemap[nid] = BVLShl(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRA:
                nodemap[nid] = BVAShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRL:
                nodemap[nid] = BVLShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == ITE:
                if (get_type(getnode(nids[2])) == BOOL) or (get_type(
                        getnode(nids[3])) == BOOL):
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])),
                                       B2BV(getnode(nids[2])),
                                       B2BV(getnode(nids[3])))
                else:
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])),
                                       getnode(nids[2]), getnode(nids[3]))

            if ntype == NEXT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(
                        getnode(nids[2])) == BOOL):
                    lval = TS.get_prime(getnode(nids[1]))
                    rval = B2BV(getnode(nids[2]))
                else:
                    lval = TS.get_prime(getnode(nids[1]))
                    rval = getnode(nids[2])

                nodemap[nid] = EqualsOrIff(lval, rval)

                ftrans.append((lval, [(TRUE(), rval)]))

            if ntype == INIT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(
                        getnode(nids[2])) == BOOL):
                    nodemap[nid] = EqualsOrIff(BV2B(getnode(nids[1])),
                                               BV2B(getnode(nids[2])))
                elif get_type(getnode(nids[1])).is_array_type():
                    _type = get_type(getnode(nids[1]))
                    nodemap[nid] = EqualsOrIff(
                        getnode(nids[1]),
                        Array(_type.index_type, default=getnode(nids[2])))
                else:
                    nodemap[nid] = EqualsOrIff(getnode(nids[1]),
                                               getnode(nids[2]))
                initlist.append(getnode(nid))

            if ntype == CONSTRAINT:
                nodemap[nid] = BV2B(getnode(nids[0]))
                invarlist.append(getnode(nid))

            if ntype == BAD:
                nodemap[nid] = getnode(nids[0])

                if len(nids) > 1:
                    assert_name = nids[1]
                    description = "Embedded assertion: {}".format(assert_name)
                else:
                    assert_name = 'embedded_assertion_%i' % prop_count
                    description = 'Embedded assertion number %i' % prop_count
                    prop_count += 1

                # Following problem format (name, description, strformula)
                invar_props.append(
                    (assert_name, description, Not(BV2B(getnode(nid)))))

            if nid not in nodemap:
                Logger.error("Unknown node type \"%s\"" % ntype)

            # get wirename if it exists
            if ntype not in {STATE, INPUT, OUTPUT, BAD}:
                # disregard comments at the end of the line
                try:
                    symbol_idx = nids.index(';')
                    symbol_idx -= 1  # the symbol should be before the comment
                except:
                    # the symbol is just the end
                    symbol_idx = -1

                # check for wirename, if it's an integer, then it's a node ref
                try:
                    a = int(nids[symbol_idx])
                except:
                    try:
                        name = str(nids[symbol_idx])
                        # use the exact name, unless it has already been used
                        wire = Symbol(name, getnode(nids[0]))
                        if wire in ts.vars:
                            wire = FreshSymbol(getnode(nids[0]),
                                               template=name + "%d")
                        invarlist.append(EqualsOrIff(wire, B2BV(nodemap[nid])))
                        ts.add_var(wire)
                    except:
                        pass

        if Logger.level(1):
            name = lambda x: str(nodemap[x]) if nodemap[x].is_symbol() else x
            uncovered = [name(x) for x in nodemap if x not in node_covered]
            uncovered.sort()
            if len(uncovered) > 0:
                Logger.warning("Unlinked nodes \"%s\"" % ",".join(uncovered))

        if not self.symbolic_init:
            init = simplify(And(initlist))
        else:
            init = TRUE()

        invar = simplify(And(invarlist))

        # instead of trans, we're using the ftrans format -- see below
        ts.set_behavior(init, TRUE(), invar)

        # add ftrans
        for var, cond_assign_list in ftrans:
            ts.add_func_trans(var, cond_assign_list)

        hts.add_ts(ts)

        return (hts, invar_props, ltl_props)
Пример #6
0
    def generate_STS(self, lines):
        ts = TS("Additional system")
        init = TRUE()
        trans = TRUE()
        invar = TRUE()

        states = {}
        assigns = set([])
        varsmap = {}

        def def_var(name, vtype):
            if name in varsmap:
                return varsmap[name]
            var = Symbol(name, vtype)
            ts.add_state_var(var)
            return var

        for line in lines:
            if line.comment:
                continue
            if line.init:
                if T_I not in states:
                    states[T_I] = TRUE()

                if line.init.varname != "":
                    (value, typev) = self.__get_value(line.init.value)
                    ivar = def_var(line.init.varname, typev)
                    state = EqualsOrIff(ivar, value)
                else:
                    state = TRUE() if line.init.value == T_TRUE else FALSE()

                states[T_I] = And(states[T_I], state)

                # Optimization for the initial state assignment
                init = And(init, state)

            state = TRUE()
            if line.state:
                sname = T_S + line.state.id
                if (line.state.varname != ""):
                    (value, typev) = self.__get_value(line.state.value)
                    ivar = def_var(line.state.varname, typev)
                    state = EqualsOrIff(ivar, value)
                    assval = (sname, line.state.varname)
                    if assval not in assigns:
                        assigns.add(assval)
                    else:
                        Logger.error(
                            "Double assignment for variable \"%s\" at state \"%s\""
                            % (line.state.varname, sname))
                else:
                    state = TRUE() if line.state.value == T_TRUE else FALSE()

                if sname not in states:
                    states[sname] = TRUE()

                states[sname] = And(states[sname], state)

        stateid_width = math.ceil(math.log(len(states)) / math.log(2))
        stateid_var = Symbol(self.new_state_id(), BVType(stateid_width))

        init = And(init, EqualsOrIff(stateid_var, BV(0, stateid_width)))
        invar = And(
            invar,
            Implies(EqualsOrIff(stateid_var, BV(0, stateid_width)),
                    states[T_I]))
        states[T_I] = EqualsOrIff(stateid_var, BV(0, stateid_width))

        count = 1
        state_items = list(states.keys())
        state_items.sort()
        for state in state_items:
            if state == T_I:
                continue
            invar = And(
                invar,
                Implies(EqualsOrIff(stateid_var, BV(count, stateid_width)),
                        states[state]))
            states[state] = EqualsOrIff(stateid_var, BV(count, stateid_width))
            count += 1

        transdic = {}

        for line in lines:
            if line.comment:
                continue

            if line.trans:
                if states[line.trans.start] not in transdic:
                    transdic[states[line.trans.start]] = []
                transdic[states[line.trans.start]].append(
                    states[line.trans.end])

        for transition in transdic:
            (start, end) = (transition, transdic[transition])
            trans = And(trans, Implies(start, TS.to_next(Or(end))))

        vars_ = [v for v in get_free_variables(trans) if not TS.is_prime(v)]
        vars_ += get_free_variables(init)
        vars_ += get_free_variables(invar)

        invar = And(invar, BVULE(stateid_var, BV(count - 1, stateid_width)))
        ts.set_behavior(init, trans, invar)
        ts.add_state_var(stateid_var)

        hts = HTS("ETS")
        hts.add_ts(ts)
        invar_props = []
        ltl_props = []

        return (hts, invar_props, ltl_props)
Пример #7
0
    def combine_systems(hts,
                        hts2,
                        k,
                        symbolic_init,
                        eqprop=None,
                        inc=True,
                        non_deterministic=False):
        htseq = HTS("eq")

        hts1_varnames = [v.symbol_name() for v in hts.vars]
        hts2_varnames = [v.symbol_name() for v in hts2.vars]

        map1 = dict([(v, TS.get_prefix_name(v, S1)) for v in hts1_varnames]+\
                    [(TS.get_prime_name(v), TS.get_prefix_name(TS.get_prime_name(v), S1)) for v in hts1_varnames])
        map2 = dict([(v, TS.get_prefix_name(v, S2)) for v in hts2_varnames]+\
                    [(TS.get_prime_name(v), TS.get_prefix_name(TS.get_prime_name(v), S2)) for v in hts2_varnames])

        ts1_init = TRUE()
        ts2_init = TRUE()

        if not symbolic_init:
            ts1_init = substitute(hts.single_init(), map1)
            ts2_init = substitute(hts2.single_init(), map2)

        ts1 = TS()
        ts1.vars = set([TS.get_prefix(v, S1) for v in hts.vars])
        ts1.set_behavior(ts1_init,\
                         substitute(hts.single_trans(), map1),\
                         substitute(hts.single_invar(), map1))
        ts1.state_vars = set([TS.get_prefix(v, S1) for v in hts.state_vars])

        ts2 = TS()
        ts2.vars = set([TS.get_prefix(v, S2) for v in hts2.vars])
        ts2.set_behavior(ts2_init,\
                         substitute(hts2.single_trans(), map2),\
                         substitute(hts2.single_invar(), map2))
        ts2.state_vars = set([TS.get_prefix(v, S2) for v in hts2.state_vars])

        htseq.add_ts(ts1)
        htseq.add_ts(ts2)

        assumptions = []
        lemmas = []

        def sets_intersect(set1, set2):
            for el in set1:
                if not el in set2:
                    return False
            return True

        if hts.assumptions is not None:
            for assumption in hts.assumptions:
                assumptions.append(assumption)

        if hts.lemmas is not None:
            for lemma in hts.lemmas:
                lemmas.append(lemma)

        if hts2.assumptions is not None:
            for assumption in hts2.assumptions:
                assumptions.append(assumption)

        if hts2.lemmas is not None:
            for lemma in hts2.lemmas:
                lemmas.append(lemma)

        for assumption in assumptions:
            fv_assumption = get_free_variables(assumption)
            c_assumption = TRUE()

            if sets_intersect(fv_assumption, hts.vars):
                c_assumption = And(c_assumption, substitute(assumption, map1))
            if sets_intersect(fv_assumption, hts2.vars):
                c_assumption = And(c_assumption, substitute(assumption, map2))

            if c_assumption != TRUE():
                htseq.add_assumption(c_assumption)

        for lemma in lemmas:
            fv_lemma = get_free_variables(lemma)
            c_lemma = TRUE()

            if sets_intersect(fv_lemma, hts.vars):
                c_lemma = And(c_lemma, substitute(lemma, map1))
            if sets_intersect(fv_lemma, hts2.vars):
                c_lemma = And(c_lemma, substitute(lemma, map2))

            if c_lemma != TRUE():
                htseq.add_lemma(c_lemma)

        miter_out = Symbol(EQS, BOOL)

        inputs = hts.input_vars.intersection(hts2.input_vars)
        outputs = hts.output_vars.intersection(hts2.output_vars)

        htseq.input_vars = set([
            TS.get_prefix(v, S1) for v in hts.input_vars
        ]).union(set([TS.get_prefix(v, S2) for v in hts2.input_vars]))
        htseq.output_vars = set([
            TS.get_prefix(v, S1) for v in hts.output_vars
        ]).union(set([TS.get_prefix(v, S2) for v in hts2.output_vars]))

        if symbolic_init or (not non_deterministic):
            states = hts.state_vars.intersection(hts2.state_vars)
        else:
            states = []

        eqinputs = TRUE()
        eqoutputs = TRUE()
        eqstates = TRUE()

        for inp in inputs:
            eqinputs = And(
                eqinputs,
                EqualsOrIff(TS.get_prefix(inp, S1), TS.get_prefix(inp, S2)))

        for out in outputs:
            eqoutputs = And(
                eqoutputs,
                EqualsOrIff(TS.get_prefix(out, S1), TS.get_prefix(out, S2)))

        for svar in states:
            eqstates = And(
                eqstates,
                EqualsOrIff(TS.get_prefix(svar, S1), TS.get_prefix(svar, S2)))

        if eqprop is None:
            if symbolic_init or (not non_deterministic):
                invar = And(eqinputs,
                            Iff(miter_out, Implies(eqstates, eqoutputs)))
            else:
                invar = And(eqinputs, Iff(miter_out, eqoutputs))

            Logger.log('Inferring equivalence property: {}'.format(invar), 2)
        else:
            sparser = StringParser()
            eqprop = sparser.parse_formulae(eqprop)
            if len(eqprop) > 1:
                Logger.error("Expecting a single equivalence property")
            eqprop = eqprop[0][1]
            invar = Iff(miter_out, eqprop)
            Logger.log('Using provided equivalence property: {}'.format(invar),
                       2)

        tsmo = TS()
        tsmo.vars = set([miter_out])
        tsmo.invar = invar
        htseq.add_ts(tsmo)

        return (htseq, miter_out)
Пример #8
0
    def parse_string(self, strinput):

        hts = HTS()
        ts = TS()

        nodemap = {}
        node_covered = set([])

        translist = []
        initlist = []
        invarlist = []

        invar_props = []
        ltl_props = []

        def getnode(nid):
            node_covered.add(nid)
            if int(nid) < 0:
                return Ite(BV2B(nodemap[str(-int(nid))]), BV(0,1), BV(1,1))
            return nodemap[nid]

        def binary_op(bvop, bop, left, right):
            if (get_type(left) == BOOL) and (get_type(right) == BOOL):
                return bop(left, right)
            return bvop(B2BV(left), B2BV(right))

        def unary_op(bvop, bop, left):
            if (get_type(left) == BOOL):
                return bop(left)
            return bvop(left)

        for line in strinput.split(NL):
            linetok = line.split()
            if len(linetok) == 0:
                continue
            if linetok[0] == COM:
                continue

            (nid, ntype, *nids) = linetok

            if ntype == SORT:
                (stype, *attr) = nids
                if stype == BITVEC:
                    nodemap[nid] = BVType(int(attr[0]))
                    node_covered.add(nid)
                if stype == ARRAY:
                    nodemap[nid] = ArrayType(getnode(attr[0]), getnode(attr[1]))
                    node_covered.add(nid)

            if ntype == WRITE:
                nodemap[nid] = Store(*[getnode(n) for n in nids[1:4]])

            if ntype == READ:
                nodemap[nid] = Select(getnode(nids[1]), getnode(nids[2]))

            if ntype == ZERO:
                nodemap[nid] = BV(0, getnode(nids[0]).width)

            if ntype == ONE:
                nodemap[nid] = BV(1, getnode(nids[0]).width)

            if ntype == ONES:
                width = getnode(nids[0]).width
                nodemap[nid] = BV((2**width)-1, width)

            if ntype == REDOR:
                width = get_type(getnode(nids[1])).width
                zeros = BV(0, width)
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), zeros))

            if ntype == REDAND:
                width = get_type(getnode(nids[1])).width
                ones = BV((2**width)-1, width)
                nodemap[nid] = BVComp(getnode(nids[1]), ones)

            if ntype == CONSTD:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(int(nids[1]), width)

            if ntype == CONST:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(bin_to_dec(nids[1]), width)

            if ntype == STATE:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN%nid), getnode(nids[0]))
                ts.add_state_var(nodemap[nid])

            if ntype == INPUT:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN%nid), getnode(nids[0]))
                ts.add_input_var(nodemap[nid])

            if ntype == OUTPUT:
                if len(nids) > 2:
                    symbol = Symbol(nids[2], getnode(nids[0]))
                else:
                    symbol = Symbol((SN%nid), getnode(nids[0]))

                nodemap[nid] = EqualsOrIff(symbol, B2BV(getnode(nids[1])))
                invarlist.append(nodemap[nid])
                node_covered.add(nid)
                ts.add_output_var(symbol)

            if ntype == AND:
                nodemap[nid] = binary_op(BVAnd, And, getnode(nids[1]), getnode(nids[2]))

            if ntype == CONCAT:
                nodemap[nid] = BVConcat(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == XOR:
                nodemap[nid] = binary_op(BVXor, Xor, getnode(nids[1]), getnode(nids[2]))

            if ntype == NAND:
                bvop = lambda x,y: BVNot(BVAnd(x, y))
                bop = lambda x,y: Not(And(x, y))
                nodemap[nid] = binary_op(bvop, bop, getnode(nids[1]), getnode(nids[2]))

            if ntype == IMPLIES:
                nodemap[nid] = BVOr(BVNot(getnode(nids[1])), getnode(nids[2]))

            if ntype == NOT:
                nodemap[nid] = unary_op(BVNot, Not, getnode(nids[1]))

            if ntype == UEXT:
                nodemap[nid] = BVZExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == OR:
                nodemap[nid] = binary_op(BVOr, Or, getnode(nids[1]), getnode(nids[2]))

            if ntype == ADD:
                nodemap[nid] = BVAdd(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SUB:
                nodemap[nid] = BVSub(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == UGT:
                nodemap[nid] = BVUGT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == UGTE:
                nodemap[nid] = BVUGE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == ULT:
                nodemap[nid] = BVULT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == ULTE:
                nodemap[nid] = BVULE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == EQ:
                nodemap[nid] = BVComp(getnode(nids[1]), getnode(nids[2]))

            if ntype == NE:
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), getnode(nids[2])))

            if ntype == MUL:
                nodemap[nid] = BVMul(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SLICE:
                nodemap[nid] = BVExtract(B2BV(getnode(nids[1])), int(nids[3]), int(nids[2]))

            if ntype == SLL:
                nodemap[nid] = BVLShl(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRA:
                nodemap[nid] = BVAShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRL:
                nodemap[nid] = BVLShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == ITE:
                if (get_type(getnode(nids[2])) == BOOL) or (get_type(getnode(nids[3])) == BOOL):
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])), BV2B(getnode(nids[2])), BV2B(getnode(nids[3])))
                else:
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])), getnode(nids[2]), getnode(nids[3]))

            if ntype == NEXT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(getnode(nids[2])) == BOOL):
                    nodemap[nid] = EqualsOrIff(BV2B(TS.get_prime(getnode(nids[1]))), BV2B(getnode(nids[2])))
                else:
                    nodemap[nid] = EqualsOrIff(TS.get_prime(getnode(nids[1])), getnode(nids[2]))
                translist.append(getnode(nid))

            if ntype == INIT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(getnode(nids[2])) == BOOL):
                    nodemap[nid] = EqualsOrIff(BV2B(getnode(nids[1])), BV2B(getnode(nids[2])))
                else:
                    nodemap[nid] = EqualsOrIff(getnode(nids[1]), getnode(nids[2]))
                initlist.append(getnode(nid))

            if ntype == CONSTRAINT:
                nodemap[nid] = BV2B(getnode(nids[0]))
                invarlist.append(getnode(nid))

            if ntype == BAD:
                nodemap[nid] = getnode(nids[0])
                invar_props.append(Not(BV2B(getnode(nid))))

            if nid not in nodemap:
                Logger.error("Unknown node type \"%s\""%ntype)

        if Logger.level(1):
            name = lambda x: str(nodemap[x]) if nodemap[x].is_symbol() else x
            uncovered = [name(x) for x in nodemap if x not in node_covered]
            uncovered.sort()
            if len(uncovered) > 0:
                Logger.warning("Unlinked nodes \"%s\""%",".join(uncovered))

        if not self.symbolic_init:
            init = simplify(And(initlist))
        else:
            init = TRUE()
        trans = simplify(And(translist))
        invar = simplify(And(invarlist))

        ts.set_behavior(init, trans, invar)
        hts.add_ts(ts)

        return (hts, invar_props, ltl_props)
Пример #9
0
    def parse_file(self, strfile, config, flags=None):
        self.config = config
        self.__reset_structures()

        Logger.msg("Reading CoreIR system... ", 1)
        top_module = self.context.load_from_file(strfile)

        if config.run_passes:
            self.run_passes()

        Modules.abstract_clock = self.config.abstract_clock
        Modules.symbolic_init = self.config.symbolic_init

        top_def = top_module.definition
        interface = list(top_module.type.items())
        modules = {}
        sym_map = {}

        not_defined_mods = []

        hts = HTS(top_module.name)
        invar_props = []
        ltl_props = []

        Logger.msg("Starting encoding... ", 1)

        count = 0

        def extract_value(x, modname, inst_intr, inst_conf, inst_mod):
            if x in inst_intr:
                return self.BVVar(modname + x, inst_intr[x].size)

            if x in inst_conf:
                xval = inst_conf[x].value
                if type(xval) == bool:
                    xval = 1 if xval else 0
                else:
                    if type(xval) != int:
                        try:
                            if xval.is_x():
                                xval = None
                            else:
                                xval = xval.as_uint()
                        except:
                            try:
                                xval = xval.val
                            except:
                                xval = xval.unsigned_value
                return xval

            if inst_mod.generated:
                inst_args = inst_mod.generator_args
                if x in inst_args:
                    return inst_args[x].value

            return None

        if Logger.level(1):
            timer = Logger.start_timer("IntConvertion", False)
            en_tprinting = False

        if Logger.level(2):
            ttimer = Logger.start_timer("Convertion", False)

        if self.config.deterministic:
            td_instances = top_def.instances
            top_def_instances = [(inst.selectpath, inst.config, inst.module)
                                 for inst in td_instances]
            top_def_instances.sort()
        else:
            top_def_instances = list(top_def.instances)

        totalinst = len(top_def_instances)

        for inst in top_def_instances:
            if Logger.level(1):
                count += 1
                if count % 300 == 0:
                    dtime = Logger.get_timer(timer, False)
                    if dtime > 2:
                        en_tprinting = True
                    if en_tprinting:
                        Logger.inline(
                            "%s" % status_bar(
                                (float(count) / float(totalinst))), 1)
                        timer = Logger.start_timer("IntConvertion", False)

                    if Logger.level(2):
                        Logger.get_timer(timer, False)

            ts = None

            if self.config.deterministic:
                (inst_name, inst_conf, inst_mod) = inst
            else:
                inst_name = inst.selectpath
                inst_conf = inst.config
                inst_mod = inst.module

            inst_type = inst_mod.name
            inst_intr = dict(inst_mod.type.items())
            modname = (SEP.join(inst_name)) + SEP

            values_dic = {}

            for x in self.attrnames:
                values_dic[x] = extract_value(x, modname, inst_intr, inst_conf,
                                              inst_mod)

            def args(ports_list):
                return [values_dic[x] for x in ports_list]

            sym = self.__mod_to_sym(inst_type, args)
            if sym is not None:
                sym_map[sym[0].symbol_name()] = (sym[0], sym[1])
                continue

            ts = self.__mod_to_impl(inst_type, args)

            if ts is not None:

                if flags is not None:
                    if CoreIRModelFlags.NO_INIT in flags:
                        ts.init = TRUE()

                    if CoreIRModelFlags.FC_LEMMAS in flags:
                        for v in ts.vars:
                            v_name = v.symbol_name()
                            if (CR in v_name) or (RCR in v_name):
                                cons_v_name = v_name[:len(
                                    CR)] if CR in v_name else v_name[:len(RCR)]
                                cons_v = Symbol(cons_v_name, v.symbol_type())
                                lemma = EqualsOrIff(
                                    cons_v,
                                    BV(values_dic[self.VALUE],
                                       cons_v.symbol_type().width))
                                hts.add_lemma(lemma)

                        for v in ts.state_vars:
                            lemma = EqualsOrIff(
                                v,
                                BV(values_dic[self.INIT],
                                   v.symbol_type().width))
                            hts.add_lemma(lemma)

                hts.add_ts(ts)
            else:
                if inst_type not in not_defined_mods:
                    intface = ", ".join([
                        "%s" % (v) for v in values_dic
                        if values_dic[v] is not None
                    ])
                    Logger.error(
                        "Module type \"%s\" with interface \"%s\" is not defined"
                        % (inst_type, intface))
                    not_defined_mods.append(inst_type)

        Logger.clear_inline(1)

        if self.config.deterministic:
            interface.sort()

        for var in interface:
            varname = SELF + SEP + var[0]
            bvvar = self.BVVar(varname, var[1].size)
            if (var[1].is_input()):
                hts.add_input_var(bvvar)
            else:
                hts.add_output_var(bvvar)

            # Adding clock behavior
            if (self.CLK in var[0].lower()) and (var[1].is_input()):
                self.clock_list.add(bvvar)
                if self.config.abstract_clock:
                    self.abstract_clock_list.add(
                        (bvvar, (BV(0, var[1].size), BV(1, var[1].size))))

        varmap = dict([(s.symbol_name(), s) for s in hts.vars])

        def split_paths(path):
            ret = []
            for el in path:
                ret += el.split(CSEP)

            return ret

        def dict_select(dic, el):
            return dic[el] if el in dic else None

        eq_conns = []
        eq_vars = set([])

        if self.config.deterministic:
            td_connections = top_def.connections
            top_def_connections = [
                ((conn.first.selectpath, conn.second.selectpath)
                 if conn.first.selectpath < conn.second.selectpath else
                 (conn.second.selectpath, conn.first.selectpath), conn)
                for conn in td_connections
            ]
            top_def_connections.sort()
        else:
            top_def_connections = list(top_def.connections)

        for conn in top_def_connections:

            if self.config.deterministic:
                first_selectpath = split_paths(conn[0][0])
                second_selectpath = split_paths(conn[0][1])
            else:
                first_selectpath = split_paths(conn.first.selectpath)
                second_selectpath = split_paths(conn.second.selectpath)

            first = SEP.join(first_selectpath)
            second = SEP.join(second_selectpath)

            firstvar = None
            secondvar = None

            if is_number(first_selectpath[-1]):
                firstname = SEP.join(first_selectpath[:-1])
            else:
                firstname = SEP.join(first_selectpath)

            if is_number(second_selectpath[-1]):
                secondname = SEP.join(second_selectpath[:-1])
            else:
                secondname = SEP.join(second_selectpath)

            first = (dict_select(varmap, self.remap_or2an(firstname)), None)
            second = (dict_select(varmap, self.remap_or2an(secondname)), None)

            firstvar = first[0]
            secondvar = second[0]

            if (firstvar is None) and (self.remap_or2an(firstname) in sym_map):
                firstvar = sym_map[self.remap_or2an(firstname)][1]

            if (secondvar is None) and (self.remap_or2an(secondname)
                                        in sym_map):
                secondvar = sym_map[self.remap_or2an(secondname)][1]

            if (firstvar is None) and (secondvar is not None):
                Logger.error("Symbol \"%s\" is not defined" % firstname)
                first = (Symbol(self.remap_or2an(firstname),
                                secondvar.symbol_type()), None)
            else:
                if firstvar.is_constant():
                    sel = int(first_selectpath[-1]) if (is_number(
                        first_selectpath[-1])) else None
                    first = (firstvar, sel)
                else:
                    if (is_number(first_selectpath[-1])) and (
                            firstvar.symbol_type() !=
                            BOOL) and (firstvar.symbol_type().width > 1):
                        sel = int(first_selectpath[-1])
                        first = (firstvar, sel)

            if (firstvar is not None) and (secondvar is None):
                Logger.error("Symbol \"%s\" is not defined" % secondname)
                second = (Symbol(self.remap_or2an(secondname),
                                 firstvar.symbol_type()), None)
            else:
                if secondvar.is_constant():
                    sel = int(second_selectpath[-1]) if (is_number(
                        second_selectpath[-1])) else None
                    second = (secondvar, sel)
                else:
                    if (is_number(second_selectpath[-1])) and (
                            secondvar.symbol_type() !=
                            BOOL) and (secondvar.symbol_type().width > 1):
                        sel = int(second_selectpath[-1])
                        second = (secondvar, sel)

            assert ((firstvar is not None) and (secondvar is not None))

            eq_conns.append((first, second))

            if firstvar.is_symbol():
                eq_vars.add(firstvar)
            if secondvar.is_symbol():
                eq_vars.add(secondvar)

        conns_len = len(eq_conns)

        if self.pack_connections:
            eq_conns = self.__pack_connections(eq_conns)

        if len(eq_conns) < conns_len:
            Logger.log("Packed %d connections" % (conns_len - len(eq_conns)),
                       1)

        eq_formula = TRUE()

        for eq_conn in eq_conns:

            (fst, snd) = eq_conn

            if fst[1] is None:
                first = fst[0]
            else:
                if len(fst) > 2:
                    first = BVExtract(fst[0], fst[1], fst[2])
                else:
                    first = BVExtract(fst[0], fst[1], fst[1])

            if snd[1] is None:
                second = snd[0]
            else:
                if len(snd) > 2:
                    second = BVExtract(snd[0], snd[1], snd[2])
                else:
                    second = BVExtract(snd[0], snd[1], snd[1])

            if (first.get_type() != BOOL) and (second.get_type() == BOOL):
                second = Ite(second, BV(1, 1), BV(0, 1))

            if (first.get_type() == BOOL) and (second.get_type() != BOOL):
                first = Ite(first, BV(1, 1), BV(0, 1))

            eq_formula = And(eq_formula, EqualsOrIff(first, second))

            Logger.log(str(EqualsOrIff(first, second)), 3)

        ts = TS("Connections")
        ts.invar = eq_formula
        ts.vars = eq_vars

        hts.add_ts(ts)

        if self.enc_map is not None:
            del (self.enc_map)

        if Logger.level(2):
            Logger.get_timer(ttimer)

        return (hts, invar_props, ltl_props)
Пример #10
0
    def parse_file(self, file_path, config, flags=None):
        # coreir needs a string representing the path
        strfile = str(file_path)

        self.config = config
        self.__reset_structures()

        Logger.msg("Reading CoreIR system... ", 1)
        top_module = self.context.load_from_file(strfile)

        if config.run_coreir_passes:
            self.run_passes()

        Modules.abstract_clock = self.config.abstract_clock
        Modules.symbolic_init = self.config.symbolic_init

        top_def = top_module.definition
        interface = list(top_module.type.items())
        modules = {}
        sym_map = {}

        not_defined_mods = []

        hts = HTS(top_module.name)
        invar_props = []
        ltl_props = []

        Logger.msg("Starting encoding... ", 1)

        count = 0

        def extract_value(x, modname, inst_intr, inst_conf, inst_mod):
            if x in inst_intr:
                return self.BVVar(modname + x, inst_intr[x].size)

            if x in inst_conf:
                xval = inst_conf[x].value
                if type(xval) == bool:
                    xval = 1 if xval else 0
                else:
                    if type(xval) != int:
                        try:
                            xval = xval.as_uint()
                        except:
                            xval = None
                return xval

            if inst_mod.generated:
                inst_args = inst_mod.generator_args
                if x in inst_args:
                    return inst_args[x].value

            return None

        if Logger.level(1):
            timer = Logger.start_timer("IntConvertion", False)
            en_tprinting = False

        if Logger.level(2):
            ttimer = Logger.start_timer("Convertion", False)

        td_instances = top_def.instances
        top_def_instances = [(inst.selectpath, inst.config, inst.module)
                             for inst in td_instances]
        # sorting keeps the behavior deterministic
        top_def_instances.sort()

        totalinst = len(top_def_instances)

        for inst in top_def_instances:
            if Logger.level(1):
                count += 1
                if count % 300 == 0:
                    dtime = Logger.get_timer(timer, False)
                    if dtime > 2:
                        en_tprinting = True
                    if en_tprinting:
                        Logger.inline(
                            "%s" % status_bar(
                                (float(count) / float(totalinst))), 1)
                        timer = Logger.start_timer("IntConvertion", False)

                    if Logger.level(2):
                        Logger.get_timer(timer, False)

            ts = None

            (inst_name, inst_conf, inst_mod) = inst
            inst_type = inst_mod.name
            inst_intr = dict(inst_mod.type.items())
            modname = (SEP.join(inst_name)) + SEP

            values_dic = {}

            for x in self.attrnames:
                values_dic[x] = extract_value(x, modname, inst_intr, inst_conf,
                                              inst_mod)

            def args(ports_list):
                return [values_dic[x] for x in ports_list]

            sym = self.__mod_to_sym(inst_type, args)
            if sym is not None:
                sym_map[sym[0].symbol_name()] = (sym[0], sym[1])
                continue

            ts = self.__mod_to_impl(inst_type, args)

            if ts is not None:

                if flags is not None:
                    if CoreIRModelFlags.NO_INIT in flags:
                        ts.init = TRUE()

                    if CoreIRModelFlags.FC_LEMMAS in flags:
                        for v in ts.vars:
                            v_name = v.symbol_name()
                            if (CR in v_name) or (RCR in v_name):
                                cons_v_name = v_name[:len(
                                    CR)] if CR in v_name else v_name[:len(RCR)]
                                cons_v = Symbol(cons_v_name, v.symbol_type())
                                lemma = EqualsOrIff(
                                    cons_v,
                                    BV(values_dic[self.VALUE],
                                       cons_v.symbol_type().width))
                                hts.add_lemma(lemma)

                        for v in ts.state_vars:
                            lemma = EqualsOrIff(
                                v,
                                BV(values_dic[self.INIT],
                                   v.symbol_type().width))
                            hts.add_lemma(lemma)

                hts.add_ts(ts)
            else:
                if inst_type not in not_defined_mods:
                    intface = ", ".join([
                        "%s" % (v) for v in values_dic
                        if values_dic[v] is not None
                    ])
                    Logger.error(
                        "Module type \"%s\" with interface \"%s\" is not defined"
                        % (inst_type, intface))
                    not_defined_mods.append(inst_type)

        Logger.clear_inline(1)

        # sorting keeps the behavior deterministic
        interface.sort()

        for var in interface:
            varname = SELF + SEP + var[0]
            bvvar = self.BVVar(varname, var[1].size)
            if (var[1].is_input()):
                hts.add_input_var(bvvar)
            else:
                hts.add_output_var(bvvar)

            if var[1].kind == NAMED and var[1].name == COREIR_CLK:
                self.clock_list.add(bvvar)
                if self.config.abstract_clock:
                    self.abstract_clock_list.add(
                        (bvvar, (BV(0, var[1].size), BV(1, var[1].size))))
                else:
                    # add state variable that stores the previous clock value
                    # This is IMPORTANT for model checking soundness, but
                    #    it isn't obvious that this is necessary
                    #
                    # imagine we have an explicit clock encoding (not abstract_clock), e.g.
                    #   next(state_var) = (!clk & next(clk)) ? <state_update> : <old value>
                    # and if we're trying to prove something using k-induction, there's a "loop free"
                    #   constraint that the state and output variables don't repeat (reach the same
                    #   state twice) in the trace
                    #   but on a negedge clock, there can be scenarios where no state or outputs
                    #   can be updated and we'll get a trivial unsat which will be interpreted as
                    #   a converged proof -- uh oh
                    #
                    # adding this state element just ensures that the loop free constraint won't
                    #   be violated trivially
                    # e.g. on a neg-edge clock, this new state element will have changed

                    # make it hidden (won't be printed)
                    # HIDDEN_VAR is a prefix that printers check for
                    trailing_clock_var = self.BVVar(
                        "{}{}__prev".format(HIDDEN_VAR, varname), var[1].size)

                    ts = TS()
                    ts.add_state_var(trailing_clock_var)
                    # the initial state for this trailing variable is unconstrained
                    ts.set_behavior(
                        TRUE(),
                        EqualsOrIff(TS.get_prime(trailing_clock_var), bvvar),
                        TRUE())

                    hts.add_ts(ts)

        varmap = dict([(s.symbol_name(), s) for s in hts.vars])

        def split_paths(path):
            ret = []
            for el in path:
                ret += el.split(CSEP)

            return ret

        def dict_select(dic, el):
            return dic[el] if el in dic else None

        eq_conns = []
        eq_vars = set([])

        td_connections = top_def.connections
        top_def_connections = [
            ((conn.first.selectpath, conn.second.selectpath)
             if conn.first.selectpath < conn.second.selectpath else
             (conn.second.selectpath, conn.first.selectpath), conn)
            for conn in td_connections
        ]
        # sorting keeps the behavior deterministic
        top_def_connections.sort()

        for conn in top_def_connections:

            first_selectpath = split_paths(conn[0][0])
            second_selectpath = split_paths(conn[0][1])

            first = SEP.join(first_selectpath)
            second = SEP.join(second_selectpath)

            firstvar = None
            secondvar = None

            if is_number(first_selectpath[-1]):
                firstname = SEP.join(first_selectpath[:-1])
            else:
                firstname = SEP.join(first_selectpath)

            if is_number(second_selectpath[-1]):
                secondname = SEP.join(second_selectpath[:-1])
            else:
                secondname = SEP.join(second_selectpath)

            first = (dict_select(varmap, self.remap_or2an(firstname)), None)
            second = (dict_select(varmap, self.remap_or2an(secondname)), None)

            firstvar = first[0]
            secondvar = second[0]

            if (firstvar is None) and (self.remap_or2an(firstname) in sym_map):
                firstvar = sym_map[self.remap_or2an(firstname)][1]

            if (secondvar is None) and (self.remap_or2an(secondname)
                                        in sym_map):
                secondvar = sym_map[self.remap_or2an(secondname)][1]

            if (firstvar is None) and (secondvar is not None):
                Logger.error("Symbol \"%s\" is not defined" % firstname)
                first = (Symbol(self.remap_or2an(firstname),
                                secondvar.symbol_type()), None)
            else:
                if firstvar.is_constant():
                    sel = int(first_selectpath[-1]) if (is_number(
                        first_selectpath[-1])) else None
                    first = (firstvar, sel)
                else:
                    if (is_number(first_selectpath[-1])) and (
                            firstvar.symbol_type() !=
                            BOOL) and (firstvar.symbol_type().width > 1):
                        sel = int(first_selectpath[-1])
                        first = (firstvar, sel)

            if (firstvar is not None) and (secondvar is None):
                Logger.error("Symbol \"%s\" is not defined" % secondname)
                second = (Symbol(self.remap_or2an(secondname),
                                 firstvar.symbol_type()), None)
            else:
                if secondvar.is_constant():
                    sel = int(second_selectpath[-1]) if (is_number(
                        second_selectpath[-1])) else None
                    second = (secondvar, sel)
                else:
                    if (is_number(second_selectpath[-1])) and (
                            secondvar.symbol_type() !=
                            BOOL) and (secondvar.symbol_type().width > 1):
                        sel = int(second_selectpath[-1])
                        second = (secondvar, sel)

            assert ((firstvar is not None) and (secondvar is not None))

            eq_conns.append((first, second))

            if firstvar.is_symbol():
                eq_vars.add(firstvar)
            if secondvar.is_symbol():
                eq_vars.add(secondvar)

        conns_len = len(eq_conns)

        if self.pack_connections:
            eq_conns = self.__pack_connections(eq_conns)

        if len(eq_conns) < conns_len:
            Logger.log("Packed %d connections" % (conns_len - len(eq_conns)),
                       1)

        eq_formula = TRUE()

        for eq_conn in eq_conns:

            (fst, snd) = eq_conn

            if fst[1] is None:
                first = fst[0]
            else:
                if len(fst) > 2:
                    first = BVExtract(fst[0], fst[1], fst[2])
                else:
                    first = BVExtract(fst[0], fst[1], fst[1])

            if snd[1] is None:
                second = snd[0]
            else:
                if len(snd) > 2:
                    second = BVExtract(snd[0], snd[1], snd[2])
                else:
                    second = BVExtract(snd[0], snd[1], snd[1])

            if (first.get_type() != BOOL) and (second.get_type() == BOOL):
                second = Ite(second, BV(1, 1), BV(0, 1))

            if (first.get_type() == BOOL) and (second.get_type() != BOOL):
                first = Ite(first, BV(1, 1), BV(0, 1))

            eq_formula = And(eq_formula, EqualsOrIff(first, second))

            Logger.log(str(EqualsOrIff(first, second)), 3)

        ts = TS("Connections")
        ts.invar = eq_formula
        ts.vars = eq_vars

        hts.add_ts(ts)

        if self.enc_map is not None:
            del (self.enc_map)

        if Logger.level(2):
            Logger.get_timer(ttimer)

        # check that clocks were detected if there's any state
        if hts.state_vars:
            assert self.clock_list, "Expecting clocks if there are state variables"

        return (hts, invar_props, ltl_props)
Пример #11
0
    def parse_string(self, lines):

        [none, var, state, input, output, init, invar, trans] = range(8)
        section = none

        inits = TRUE()
        invars = TRUE()
        transs = TRUE()

        sparser = StringParser()

        count = 0
        vars = set([])
        states = set([])
        inputs = set([])
        outputs = set([])
        invar_props = []
        ltl_props = []

        for line in lines:
            count += 1

            if line.strip() in ["", "\n"]:
                continue

            if T_VAR == line[:len(T_VAR)]:
                section = var
                continue

            if T_STATE == line[:len(T_STATE)]:
                section = state
                continue

            if T_INPUT == line[:len(T_INPUT)]:
                section = input
                continue

            if T_OUTPUT == line[:len(T_OUTPUT)]:
                section = output
                continue

            if T_INIT == line[:len(T_INIT)]:
                section = init
                continue

            if T_INVAR == line[:len(T_INVAR)]:
                section = invar
                continue

            if T_TRANS == line[:len(T_TRANS)]:
                section = trans
                continue

            if section in [var, state, input, output]:
                line = line[:-2].replace(" ", "").split(":")
                varname, vartype = line[0], (line[1][:-1].split("("))
                if varname[0] == "'":
                    varname = varname[1:-1]
                vardef = self._define_var(varname, vartype)

                vars.add(vardef)
                if section == state:
                    states.add(vardef)
                if section == input:
                    inputs.add(vardef)
                if section == output:
                    outputs.add(vardef)

            if section in [init, invar, trans]:
                qline = quote_names(line[:-2], replace_ops=False)

            if section == init:
                inits = And(inits, sparser.parse_formula(qline))

            if section == invar:
                invars = And(invars, sparser.parse_formula(qline))

            if section == trans:
                transs = And(transs, sparser.parse_formula(qline))

        hts = HTS("STS")
        ts = TS()

        ts.vars = vars
        ts.state_vars = states
        ts.input_vars = inputs
        ts.output_vars = outputs
        ts.init = inits
        ts.invar = invars
        ts.trans = transs

        hts.add_ts(ts)

        return (hts, invar_props, ltl_props)
Пример #12
0
    def compute(self, hts, prop):
        Logger.log("Building COI", 1)

        self._build_var_deps(hts)

        coi_vars = set(self._free_variables(prop))

        if (len(coi_vars) < 1) or (self.var_deps == {}):
            return hts

        if hts.assumptions is not None:
            for assumption in hts.assumptions:
                for v in self._free_variables(assumption):
                    coi_vars.add(v)

        if hts.lemmas is not None:
            for lemma in hts.lemmas:
                for v in self._free_variables(lemma):
                    coi_vars.add(v)

        coits = TS("COI")

        coi_vars = list(coi_vars)
        i = 0
        visited = set([])
        while i < len(coi_vars):
            var = coi_vars[i]
            if (var in visited) or (var not in self.var_deps):
                i += 1
                continue

            coi_vars = coi_vars[:i + 1] + list(
                self.var_deps[var]) + coi_vars[i + 1:]

            visited.add(var)
            i += 1

        coi_vars = frozenset(coi_vars)

        trans = list(
            conjunctive_partition(hts.single_trans(include_ftrans=True)))
        invar = list(
            conjunctive_partition(hts.single_invar(include_ftrans=True)))
        init = list(conjunctive_partition(hts.single_init()))

        coits.trans = [
            f for f in trans
            if self._intersect(coi_vars, self._free_variables(f))
        ]
        coits.invar = [
            f for f in invar
            if self._intersect(coi_vars, self._free_variables(f))
        ]
        coits.init = [
            f for f in init
            if self._intersect(coi_vars, self._free_variables(f))
        ]

        Logger.log("COI statistics:", 1)
        Logger.log("  Vars:  %s -> %s" % (len(hts.vars), len(coi_vars)), 1)
        Logger.log("  Init:  %s -> %s" % (len(init), len(coits.init)), 1)
        Logger.log("  Invar: %s -> %s" % (len(invar), len(coits.invar)), 1)
        Logger.log("  Trans: %s -> %s" % (len(trans), len(coits.trans)), 1)

        coits.trans = And(coits.trans)
        coits.invar = And(coits.invar)
        coits.init = And(coits.init)

        coits.vars = set([])
        for bf in [init, invar, trans]:
            for f in bf:
                for v in self._free_variables(f):
                    coits.vars.add(v)

        coits.input_vars = set([v for v in coi_vars if v in hts.input_vars])
        coits.output_vars = set([v for v in coi_vars if v in hts.output_vars])
        coits.state_vars = set([v for v in coi_vars if v in hts.state_vars])

        new_hts = HTS("COI")
        new_hts.add_ts(coits)

        if self.save_model:
            printer = HTSPrintersFactory.printer_by_name("STS")
            with open("/tmp/coi_model.ssts", "w") as f:
                f.write(printer.print_hts(new_hts, []))

        return new_hts