def setup(self):
#
# Editor Volumes
#
# only if showing volumes
if self.showVolumesFrame:
self.volumes = ctk.ctkCollapsibleButton(self.parent)
self.volumes.setLayout(qt.QVBoxLayout())
self.volumes.setText("Create and Select Label Maps")
self.layout.addWidget(self.volumes)
else:
self.volumes = None
# create the helper box - note this isn't a Qt widget
# but a helper class that creates Qt widgets in the given parent
if self.showVolumesFrame:
self.helper = EditorLib.HelperBox(self.volumes)
else:
self.helper = None
#
# Tool Frame
#
# (we already have self.parent for the parent widget, and self.layout for the layout)
# create the frames for the EditColor, toolsOptionsFrame and EditBox
# create collapsible button for entire "edit label maps" section
self.editLabelMapsFrame = ctk.ctkCollapsibleButton(self.parent)
self.editLabelMapsFrame.setLayout(qt.QVBoxLayout())
self.editLabelMapsFrame.setText("Edit Selected Label Map")
self.layout.addWidget(self.editLabelMapsFrame)
self.editLabelMapsFrame.collapsed = True
# add a callback to collapse/open the frame based on the validity of the label volume
self.helper.mergeValidCommand = self.updateLabelFrame
# create frame holding both the effect options and edit box:
self.effectsToolsFrame = qt.QFrame(self.editLabelMapsFrame)
self.effectsToolsFrame.setLayout(qt.QHBoxLayout())
self.editLabelMapsFrame.layout().addStretch(1)
self.editLabelMapsFrame.layout().addWidget(self.effectsToolsFrame)
# create frame for effect options
self.createEffectOptionsFrame()
# create and add frame for EditBox
self.createEditBox()
# create and add EditColor directly to "edit label map" section
self.toolsColor = EditorLib.EditColor(self.editLabelMapsFrame)
# put the tool options below the color selector
self.editLabelMapsFrame.layout().addWidget(self.effectOptionsFrame)
# Add spacer to layout
self.layout.addStretch(1)
def setup(self):
# Instantiate and connect widgets ...
#
# Reload and Test area
#
reloadCollapsibleButton = ctk.ctkCollapsibleButton()
reloadCollapsibleButton.text = "Reload && Test"
self.layout.addWidget(reloadCollapsibleButton)
reloadFormLayout = qt.QFormLayout(reloadCollapsibleButton)
# reload button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadButton = qt.QPushButton("Reload")
self.reloadButton.toolTip = "Reload this module."
self.reloadButton.name = "VolumeRenderingSceneClose Reload"
reloadFormLayout.addWidget(self.reloadButton)
self.reloadButton.connect('clicked()', self.onReload)
# reload and test button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadAndTestButton = qt.QPushButton("Reload and Test")
self.reloadAndTestButton.toolTip = "Reload this module and then run the self tests."
reloadFormLayout.addWidget(self.reloadAndTestButton)
self.reloadAndTestButton.connect('clicked()', self.onReloadAndTest)
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run the algorithm."
self.applyButton.enabled = True
parametersFormLayout.addRow(self.applyButton)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
# Collapsible button
testsCollapsibleButton = ctk.ctkCollapsibleButton()
testsCollapsibleButton.text = "Tests"
self.layout.addWidget(testsCollapsibleButton)
# Layout within the collapsible button
formLayout = qt.QFormLayout(testsCollapsibleButton)
# test buttons
tests = ( ("Part 1 : Ruler", self.onPart1Ruler),("Part 2: ChangeTracker", self.onPart2ChangeTracker),("Part 3 : PETCT", self.onPart3PETCT) )
for text,slot in tests:
testButton = qt.QPushButton(text)
testButton.toolTip = "Run the test."
formLayout.addWidget(testButton)
testButton.connect('clicked(bool)', slot)
# A collapsible button to hide screen shot options
screenShotsCollapsibleButton = ctk.ctkCollapsibleButton()
screenShotsCollapsibleButton.text = "Screen shot options"
self.layout.addWidget(screenShotsCollapsibleButton)
# layout within the collapsible button
screenShotsFormLayout = qt.QFormLayout(screenShotsCollapsibleButton)
#
# check box to trigger taking screen shots for later use in tutorials
#
self.enableScreenshotsFlagCheckBox = qt.QCheckBox()
self.enableScreenshotsFlagCheckBox.checked = 0
self.enableScreenshotsFlagCheckBox.setToolTip("If checked, take screen shots for tutorials. Use Save Data to write them to disk.")
screenShotsFormLayout.addRow("Enable Screenshots", self.enableScreenshotsFlagCheckBox)
#
# scale factor for screen shots
#
self.screenshotScaleFactorSliderWidget = ctk.ctkSliderWidget()
self.screenshotScaleFactorSliderWidget.singleStep = 1.0
self.screenshotScaleFactorSliderWidget.minimum = 1.0
self.screenshotScaleFactorSliderWidget.maximum = 50.0
self.screenshotScaleFactorSliderWidget.value = 1.0
self.screenshotScaleFactorSliderWidget.setToolTip("Set scale factor for the screen shots.")
screenShotsFormLayout.addRow("Screenshot scale factor", self.screenshotScaleFactorSliderWidget)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
# reload button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadButton = qt.QPushButton("Reload")
self.reloadButton.toolTip = "Reload this module."
self.reloadButton.name = "DataProbe Reload"
#self.layout.addWidget(self.reloadButton)
self.reloadButton.connect('clicked()', self.onReload)
# reload and test button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadAndTestButton = qt.QPushButton("Reload and Test")
self.reloadAndTestButton.toolTip = "Reload this module and then run the self tests."
#self.layout.addWidget(self.reloadAndTestButton)
self.reloadAndTestButton.connect('clicked()', self.onReloadAndTest)
settingsCollapsibleButton = ctk.ctkCollapsibleButton()
settingsCollapsibleButton.text = "Slice View Annotations Settings"
self.layout.addWidget(settingsCollapsibleButton)
settingsVBoxLayout = qt.QVBoxLayout(settingsCollapsibleButton)
dataProbeInstance = slicer.modules.DataProbeInstance
if dataProbeInstance.infoWidget:
sliceAnnotationsFrame = dataProbeInstance.infoWidget.sliceAnnotations.window
settingsVBoxLayout.addWidget(sliceAnnotationsFrame)
self.parent.layout().addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
controllerCollapsibleButton = ctk.ctkCollapsibleButton()
controllerCollapsibleButton.text = "Controller"
self.layout.addWidget(controllerCollapsibleButton)
# Layout within the dummy collapsible button
controllerFormLayout = qt.QFormLayout(controllerCollapsibleButton)
# Start Button
self.startButton = qt.QPushButton("Start")
self.startButton.toolTip = "Start running the Leap"
self.startButton.connect('clicked()',self.onStartButton)
controllerFormLayout.addWidget(self.startButton)
# Start Button
self.stopButton = qt.QPushButton("Stop")
self.stopButton.toolTip = "Stop running the Leap"
self.stopButton.connect('clicked()',self.onStopButton)
controllerFormLayout.addWidget(self.stopButton)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
# start/stop DICOM peer
self.startStopDicomPeerButton = qt.QPushButton("Start/Stop DICOM peer")
self.startStopDicomPeerButton.setCheckable(True)
self.layout.addWidget(self.startStopDicomPeerButton)
self.startStopDicomPeerButton.connect('toggled(bool)', self.onStartStopDicomPeer)
# Collapsible button
testsCollapsibleButton = ctk.ctkCollapsibleButton()
testsCollapsibleButton.text = "A collapsible button"
self.layout.addWidget(testsCollapsibleButton)
# Layout within the collapsible button
formLayout = qt.QFormLayout(testsCollapsibleButton)
# test buttons
tests = ( ("Part 1: DICOM",self.onPart1DICOM),("Part 2: Head", self.onPart2Head),("Part 3: Liver", self.onPart3Liver),("Part 4: Lung", self.onPart4Lung),)
for text,slot in tests:
testButton = qt.QPushButton(text)
testButton.toolTip = "Run the test."
formLayout.addWidget(testButton)
testButton.connect('clicked(bool)', slot)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
self.logic = LeapControllerLogic()
controllerCollapsibleButton = ctk.ctkCollapsibleButton()
controllerCollapsibleButton.text = 'Controller'
self.layout.addWidget(controllerCollapsibleButton)
controllerFormLayout = qt.QFormLayout(controllerCollapsibleButton)
self.startButton = qt.QPushButton('Start')
self.startButton.toolTip = 'Start running the Leap'
self.startButton.connect('clicked()', self.onStartButton)
controllerFormLayout.addWidget(self.startButton)
self.stopButton = qt.QPushButton('Stop')
self.stopButton.toolTip = 'Stop running the Leap'
self.stopButton.connect('clicked()', self.onStopButton)
controllerFormLayout.addWidget(self.stopButton)
self.radioFree = qt.QRadioButton('Free Rotation')
self.radioFree.connect('clicked()', self.onFreeRotate)
self.radioFree.checked = True
self.radioXY = qt.QRadioButton('Lock XY')
self.radioXY.connect('clicked()', self.onLockXY)
self.radioXZ = qt.QRadioButton('Lock XZ')
self.radioXZ.connect('clicked()', self.onLockXZ)
self.radioYZ = qt.QRadioButton('Lock YZ')
self.radioYZ.connect('clicked()', self.onLockYZ)
controllerFormLayout.addWidget(self.radioFree)
controllerFormLayout.addWidget(self.radioXY)
controllerFormLayout.addWidget(self.radioXZ)
controllerFormLayout.addWidget(self.radioYZ)
def setup(self):
#
# test list
#
self.testList = ctk.ctkCollapsibleButton(self.parent)
self.testList.setLayout(qt.QVBoxLayout())
self.testList.setText("Self Tests")
self.layout.addWidget(self.testList)
self.testList.collapsed = False
self.runAll = qt.QPushButton("Run All")
self.testList.layout().addWidget(self.runAll)
self.runAll.connect('clicked()', self.onRunAll)
self.testButtons = {}
self.testMapper = qt.QSignalMapper()
self.testMapper.connect('mapped(const QString&)', self.onRun)
testKeys = slicer.selfTests.keys()
testKeys.sort()
for test in testKeys:
self.testButtons[test] = qt.QPushButton(test)
self.testButtons[test].setToolTip(slicer.selfTests[test].__doc__)
self.testList.layout().addWidget(self.testButtons[test])
self.testMapper.setMapping(self.testButtons[test],test)
self.testButtons[test].connect('clicked()', self.testMapper, 'map()')
# Add spacer to layout
self.layout.addStretch(1)
def setupDeveloperSection(self):
if not self.developerMode:
return
def createHLayout(elements):
rowLayout = qt.QHBoxLayout()
for element in elements:
rowLayout.addWidget(element)
return rowLayout
#
# Reload and Test area
# Used during development, but hidden when delivering
# developer mode is turned off.
self.reloadCollapsibleButton = ctk.ctkCollapsibleButton()
self.reloadCollapsibleButton.text = "Reload && Test"
self.layout.addWidget(self.reloadCollapsibleButton)
reloadFormLayout = qt.QFormLayout(self.reloadCollapsibleButton)
# reload button
self.reloadButton = qt.QPushButton("Reload")
self.reloadButton.toolTip = "Reload this module."
self.reloadButton.name = "ScriptedLoadableModuleTemplate Reload"
self.reloadButton.connect('clicked()', self.onReload)
# reload and test button
self.reloadAndTestButton = qt.QPushButton("Reload and Test")
self.reloadAndTestButton.toolTip = "Reload this module and then run the self tests."
self.reloadAndTestButton.connect('clicked()', self.onReloadAndTest)
# edit python source code
self.editSourceButton = qt.QPushButton("Edit")
self.editSourceButton.toolTip = "Edit the module's source code."
self.editSourceButton.connect('clicked()', self.onEditSource)
self.editModuleUiButton = None
moduleUiFileName = self.resourcePath('UI/%s.ui' % self.moduleName)
print(moduleUiFileName)
import os.path
if os.path.isfile(moduleUiFileName):
# Module UI file exists
self.editModuleUiButton = qt.QPushButton("Edit UI")
self.editModuleUiButton.toolTip = "Edit the module's .ui file."
self.editModuleUiButton.connect('clicked()', lambda filename=moduleUiFileName: slicer.util.startQtDesigner(moduleUiFileName))
# restart Slicer button
# (use this during development, but remove it when delivering
# your module to users)
self.restartButton = qt.QPushButton("Restart Slicer")
self.restartButton.toolTip = "Restart Slicer"
self.restartButton.name = "ScriptedLoadableModuleTemplate Restart"
self.restartButton.connect('clicked()', slicer.app.restart)
if self.editModuleUiButton:
# There are many buttons, distribute them in two rows
reloadFormLayout.addRow(createHLayout([self.reloadButton, self.reloadAndTestButton, self.restartButton]))
reloadFormLayout.addRow(createHLayout([self.editSourceButton, self.editModuleUiButton]))
else:
reloadFormLayout.addRow(createHLayout([self.reloadButton, self.reloadAndTestButton, self.editSourceButton, self.restartButton]))
def setupDeveloperSection(self):
if not self.developerMode:
return
#
# Reload and Test area
#
reloadCollapsibleButton = ctk.ctkCollapsibleButton()
reloadCollapsibleButton.text = "Reload && Test"
self.layout.addWidget(reloadCollapsibleButton)
reloadFormLayout = qt.QFormLayout(reloadCollapsibleButton)
# reload button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadButton = qt.QPushButton("Reload")
self.reloadButton.toolTip = "Reload this module."
self.reloadButton.name = "ScriptedLoadableModuleTemplate Reload"
reloadFormLayout.addWidget(self.reloadButton)
self.reloadButton.connect('clicked()', self.onReload)
# reload and test button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadAndTestButton = qt.QPushButton("Reload and Test")
self.reloadAndTestButton.toolTip = "Reload this module and then run the self tests."
reloadFormLayout.addWidget(self.reloadAndTestButton)
self.reloadAndTestButton.connect('clicked()', self.onReloadAndTest)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
# Collapsible button
atlasTests = ctk.ctkCollapsibleButton()
atlasTests.text = "Atlas Tests"
self.layout.addWidget(atlasTests)
# Layout within the dummy collapsible button
dummyFormLayout = qt.QFormLayout(atlasTests)
# run Abdominal Test
self.abdominalAtlas = qt.QPushButton("Run Abdominal Test")
self.abdominalAtlas.toolTip = "Downloads abdominal atlas and loads it."
dummyFormLayout.addWidget(self.abdominalAtlas)
self.abdominalAtlas.connect('clicked(bool)', self.onAbdominalAtlas)
# run brain Test
self.brainAtlas = qt.QPushButton("Run Brain Test")
self.brainAtlas.toolTip = "Downloads brain atlas and loads it."
dummyFormLayout.addWidget(self.brainAtlas)
self.brainAtlas.connect('clicked(bool)', self.onBrainAtlas)
# run knee Test
self.kneeAtlas = qt.QPushButton("Run Knee Test")
self.kneeAtlas.toolTip = "Downloads knee atlas and loads it."
dummyFormLayout.addWidget(self.kneeAtlas)
self.kneeAtlas.connect('clicked(bool)', self.onKneeAtlas)
# Add vertical spacer
self.layout.addStretch(1)
def create(self,registationState):
"""Make the plugin-specific user interface"""
super(AffinePlugin,self).create(registationState)
self.linearMode = "Rigid"
#
# Linear Registration Pane - initially hidden
# - interface options for linear registration
# - TODO: move registration code into separate plugins
#
self.linearCollapsibleButton = ctk.ctkCollapsibleButton()
self.linearCollapsibleButton.text = "Linear Registration"
linearFormLayout = qt.QFormLayout()
self.linearCollapsibleButton.setLayout(linearFormLayout)
self.widgets.append(self.linearCollapsibleButton)
buttonLayout = qt.QVBoxLayout()
self.linearModeButtons = {}
self.linearModes = ("Rigid", "Similarity", "Affine")
for mode in self.linearModes:
self.linearModeButtons[mode] = qt.QRadioButton()
self.linearModeButtons[mode].text = mode
self.linearModeButtons[mode].setToolTip( "Run the registration in %s mode." % mode )
buttonLayout.addWidget(self.linearModeButtons[mode])
self.widgets.append(self.linearModeButtons[mode])
self.linearModeButtons[mode].connect('clicked()', lambda m=mode : self.onLinearTransform(m))
self.linearModeButtons[self.linearMode].checked = True
linearFormLayout.addRow("Registration Mode ", buttonLayout)
self.parent.layout().addWidget(self.linearCollapsibleButton)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Widget
sampleCollasibleBtn = ctk.ctkCollapsibleButton()
sampleCollasibleBtn.text = "A Collapsible Button"
self.layout.addWidget(sampleCollasibleBtn)
# Layout
sampleFormLayout = qt.QFormLayout(sampleCollasibleBtn)
# Example Button
helloWorldBtn = qt.QPushButton("Hello World!")
helloWorldBtn.toolTip = 'Print "Hello World" in standard output'
sampleFormLayout.addWidget(helloWorldBtn)
helloWorldBtn.connect('clicked()', self.onHelloWorldBtnClicked)
# Button for Texture Mapped Plane
textureBtn = qt.QPushButton("Add Texture Mapped Plane")
textureBtn.toolTip = "Add a texture mapped plane to the scene as a model"
sampleFormLayout.addWidget(textureBtn)
textureBtn.connect('clicked()', self.onTextureBtnClicked)
# Vertical spacer
self.layout.addStretch(1)
# Set local var as instance attribute
self.helloWorldBtn = helloWorldBtn
self.textureBtn = textureBtn
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run the algorithm."
self.applyButton.enabled = True
parametersFormLayout.addRow(self.applyButton)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# [TODO]
# Si potrebbe avere un file di configurazione che contiene eventualmente un path alla colorlut
# Se non e'vuoto allora lo prendo se no prendo questo di default
self.lutPath = os.path.join(slicer.app.slicerHome, "share/FreeSurfer/FreeSurferColorLUT20120827.txt")
print self.lutPath
# [END TODO]
self.zonedetectionCB = ctk.ctkCollapsibleButton()
self.zonedetectionCB.text = "Brain Zone Detection"
self.layout.addWidget(self.zonedetectionCB)
self.zoneDetectionLayout = qt.QFormLayout(self.zonedetectionCB)
### Select Atlas
self.atlasInputSelector = slicer.qMRMLNodeComboBox()
self.atlasInputSelector.nodeTypes = (("vtkMRMLScalarVolumeNode"), "")
self.atlasInputSelector.addAttribute("vtkMRMLScalarVolumeNode", "LabelMap", 0)
self.atlasInputSelector.selectNodeUponCreation = True
self.atlasInputSelector.addEnabled = False
self.atlasInputSelector.removeEnabled = False
self.atlasInputSelector.noneEnabled = True
self.atlasInputSelector.showHidden = False
self.atlasInputSelector.showChildNodeTypes = False
self.atlasInputSelector.setMRMLScene(slicer.mrmlScene)
self.atlasInputSelector.setToolTip("Pick the volumetric Atlas.")
self.zoneDetectionLayout.addRow("Volumetric parcels: ", self.atlasInputSelector)
self.dialog = qt.QFileDialog()
self.dialog.setFileMode(qt.QFileDialog.AnyFile)
self.dialog.setToolTip("Pick the input to the algorithm.")
self.fidsSelectorZone = slicer.qMRMLNodeComboBox()
self.fidsSelectorZone.nodeTypes = (("vtkMRMLMarkupsFiducialNode"), "")
self.fidsSelectorZone.selectNodeUponCreation = False
self.fidsSelectorZone.addEnabled = False
self.fidsSelectorZone.removeEnabled = False
self.fidsSelectorZone.noneEnabled = True
self.fidsSelectorZone.setMRMLScene(slicer.mrmlScene)
self.fidsSelectorZone.setToolTip("Select a fiducial list")
self.zoneDetectionLayout.addRow("Fiducial : ", self.fidsSelectorZone)
self.ROISize = qt.QLineEdit("7")
self.ROISize.setToolTip("Define side length of cubic region centered in contact centroid")
self.ROISize.setInputMask("D")
# Run Zone Detection button
self.zoneButton = qt.QPushButton("Apply")
self.zoneButton.toolTip = "Run the algorithm."
self.zoneButton.enabled = True
self.zoneDetectionLayout.addRow("Cubic Region Side Length:", self.ROISize)
self.zoneDetectionLayout.addRow(self.zoneButton)
# connections
self.zoneButton.connect("clicked(bool)", self.onZoneButton)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
self.testsCollapsibleButton = ctk.ctkCollapsibleButton()
self.testsCollapsibleButton.setLayout(qt.QFormLayout())
self.testsCollapsibleButton.text = "Quantitative Reporting Tests"
self.layout.addWidget(self.testsCollapsibleButton)
self.generateButtons()
def create(self,registrationState):
"""Make the plugin-specific user interface"""
super(LocalSimpleITKPlugin,self).create(registrationState)
# To avoid the overhead of importing SimpleITK during application
# startup, the import of SimpleITK is delayed until it is needed.
global sitk
import SimpleITK as sitk
global sitkUtils
import sitkUtils
print("LocalSimpleITKPlugin.create")
self.LocalSimpleITKMode = "Small"
self.VerboseMode = "Quiet"
#
# Local Refinment Pane - initially hidden
# - interface options for linear registration
#
localSimpleITKCollapsibleButton = ctk.ctkCollapsibleButton()
localSimpleITKCollapsibleButton.text = "Local SimpleITK"
localSimpleITKFormLayout = qt.QFormLayout()
localSimpleITKCollapsibleButton.setLayout(localSimpleITKFormLayout)
self.widgets.append(localSimpleITKCollapsibleButton)
buttonGroup = qt.QButtonGroup()
self.widgets.append(buttonGroup)
buttonLayout = qt.QVBoxLayout()
localSimpleITKModeButtons = {}
self.LocalSimpleITKModes = ("Small", "Large")
for mode in self.LocalSimpleITKModes:
localSimpleITKModeButtons[mode] = qt.QRadioButton()
localSimpleITKModeButtons[mode].text = mode
localSimpleITKModeButtons[mode].setToolTip( "Run the refinement in a %s local region." % mode.lower() )
buttonLayout.addWidget(localSimpleITKModeButtons[mode])
buttonGroup.addButton(localSimpleITKModeButtons[mode])
self.widgets.append(localSimpleITKModeButtons[mode])
localSimpleITKModeButtons[mode].connect('clicked()', lambda m=mode : self.onLocalSimpleITKMode(m))
localSimpleITKModeButtons[self.LocalSimpleITKMode].checked = True
localSimpleITKFormLayout.addRow("Local SimpleITK Mode ", buttonLayout)
buttonGroup = qt.QButtonGroup()
self.widgets.append(buttonGroup)
buttonLayout = qt.QVBoxLayout()
verboseModeButtons = {}
self.VerboseModes = ("Quiet", "Verbose", "Full Verbose")
for mode in self.VerboseModes:
verboseModeButtons[mode] = qt.QRadioButton()
verboseModeButtons[mode].text = mode
verboseModeButtons[mode].setToolTip( "Run the refinement in %s mode." % mode.lower() )
buttonLayout.addWidget(verboseModeButtons[mode])
buttonGroup.addButton(verboseModeButtons[mode])
self.widgets.append(verboseModeButtons[mode])
verboseModeButtons[mode].connect('clicked()', lambda m=mode : self.onVerboseMode(m))
verboseModeButtons[self.VerboseMode].checked = True
localSimpleITKFormLayout.addRow("Verbose Mode ", buttonLayout)
self.parent.layout().addWidget(localSimpleITKCollapsibleButton)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# input volume selector
#
self.inputSelector = slicer.qMRMLNodeComboBox()
self.inputSelector.nodeTypes = ["vtkMRMLVectorVolumeNode"]
self.inputSelector.selectNodeUponCreation = True
self.inputSelector.addEnabled = False
self.inputSelector.removeEnabled = False
self.inputSelector.noneEnabled = False
self.inputSelector.showHidden = False
self.inputSelector.showChildNodeTypes = False
self.inputSelector.setMRMLScene( slicer.mrmlScene )
self.inputSelector.setToolTip( "Pick the input to the histogram." )
parametersFormLayout.addRow("Input Volume: ", self.inputSelector)
#
# check box to trigger taking screen shots for later use in tutorials
#
self.enableScreenshotsFlagCheckBox = qt.QCheckBox()
self.enableScreenshotsFlagCheckBox.checked = 0
self.enableScreenshotsFlagCheckBox.setToolTip("If checked, take screen shots for tutorials. Use Save Data to write them to disk.")
parametersFormLayout.addRow("Enable Screenshots", self.enableScreenshotsFlagCheckBox)
#
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run the algorithm."
self.applyButton.enabled = False
parametersFormLayout.addRow(self.applyButton)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
self.inputSelector.connect("currentNodeChanged(vtkMRMLNode*)", self.onSelect)
# Add vertical spacer
self.layout.addStretch(1)
# Refresh Apply button state
self.onSelect()
def createFeaturePanels(self):
# Create GUI panels.
self.transformsCollapsibleButton = ctk.ctkCollapsibleButton()
self.setupMainPanel()
featurePanelList = Guidelet.createFeaturePanels(self)
#Due to this, Transforms collapsible button can't be collapsed...
featurePanelList = [self.transformsCollapsibleButton]
return featurePanelList
def setup(self):
# Instantiate and connect widgets ...
# Collapsible button
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the parameters collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
# fiber
self.fiberSelector = slicer.qMRMLNodeComboBox(parametersCollapsibleButton)
self.fiberSelector.nodeTypes = ["vtkMRMLFiberBundleNode"]
self.fiberSelector.selectNodeUponCreation = False
self.fiberSelector.addEnabled = False
self.fiberSelector.removeEnabled = False
self.fiberSelector.noneEnabled = True
self.fiberSelector.showHidden = False
self.fiberSelector.showChildNodeTypes = False
self.fiberSelector.setMRMLScene(slicer.mrmlScene)
self.fiberSelector.setToolTip("Pick the fiber bundle to be converted.")
parametersFormLayout.addRow("Fiber Bundle", self.fiberSelector)
# label map
self.labelSelector = slicer.qMRMLNodeComboBox(parametersCollapsibleButton)
self.labelSelector.nodeTypes = ["vtkMRMLLabelMapVolumeNode"]
self.labelSelector.selectNodeUponCreation = False
self.labelSelector.addEnabled = False
self.labelSelector.removeEnabled = False
self.labelSelector.noneEnabled = True
self.labelSelector.showHidden = False
self.labelSelector.showChildNodeTypes = False
self.labelSelector.setMRMLScene(slicer.mrmlScene)
self.labelSelector.setToolTip(
"Pick the target label volume. Must already exists in order to define sampling grid. If needed, create one in the Editor module based on template volume."
)
parametersFormLayout.addRow("Target LabelMap", self.labelSelector)
# label value
self.labelValue = qt.QSpinBox(parametersCollapsibleButton)
self.labelValue.setToolTip("The numerical value for the rasterized fiber label.")
self.labelValue.setValue(1)
parametersFormLayout.addRow("Label Value", self.labelValue)
# apply
self.applyButton = qt.QPushButton(parametersCollapsibleButton)
self.applyButton.text = "Apply"
parametersFormLayout.addWidget(self.applyButton)
self.applyButton.connect("clicked()", self.onApply)
# Add vertical spacer
self.layout.addStretch(1)
def create(self,registrationState):
"""Make the plugin-specific user interface"""
super(LocalBRAINSFitPlugin,self).create(registrationState)
self.LocalBRAINSFitMode = "Small"
self.VerboseMode = "Quiet"
#
# Local Refinment Pane - initially hidden
# - interface options for linear registration
#
localBRAINSFitCollapsibleButton = ctk.ctkCollapsibleButton()
localBRAINSFitCollapsibleButton.text = "Local BRAINSFit"
localBRAINSFitFormLayout = qt.QFormLayout()
localBRAINSFitCollapsibleButton.setLayout(localBRAINSFitFormLayout)
self.widgets.append(localBRAINSFitCollapsibleButton)
buttonGroup = qt.QButtonGroup()
self.widgets.append(buttonGroup)
buttonLayout = qt.QVBoxLayout()
localBRAINSFitModeButtons = {}
self.LocalBRAINSFitModes = ("Small", "Large")
for mode in self.LocalBRAINSFitModes:
localBRAINSFitModeButtons[mode] = qt.QRadioButton()
localBRAINSFitModeButtons[mode].text = mode
localBRAINSFitModeButtons[mode].setToolTip( "Run the refinement in a %s local region." % mode.lower() )
buttonLayout.addWidget(localBRAINSFitModeButtons[mode])
buttonGroup.addButton(localBRAINSFitModeButtons[mode])
self.widgets.append(localBRAINSFitModeButtons[mode])
localBRAINSFitModeButtons[mode].connect('clicked()', lambda m=mode : self.onLocalBRAINSFitMode(m))
localBRAINSFitModeButtons[self.LocalBRAINSFitMode].checked = True
localBRAINSFitFormLayout.addRow("Local BRAINSFit Mode ", buttonLayout)
buttonGroup = qt.QButtonGroup()
self.widgets.append(buttonGroup)
buttonLayout = qt.QVBoxLayout()
verboseModeButtons = {}
self.VerboseModes = ("Quiet", "Verbose")
for mode in self.VerboseModes:
verboseModeButtons[mode] = qt.QRadioButton()
verboseModeButtons[mode].text = mode
verboseModeButtons[mode].setToolTip( "Run the refinement in %s mode." % mode.lower() )
buttonLayout.addWidget(verboseModeButtons[mode])
buttonGroup.addButton(verboseModeButtons[mode])
self.widgets.append(verboseModeButtons[mode])
verboseModeButtons[mode].connect('clicked()', lambda m=mode : self.onVerboseMode(m))
verboseModeButtons[self.VerboseMode].checked = True
localBRAINSFitFormLayout.addRow("Verbose Mode ", buttonLayout)
self.parent.layout().addWidget(localBRAINSFitCollapsibleButton)
def setupImportLabelmap(self):
self.importLabelMapCollapsibleButton = ctk.ctkCollapsibleButton()
self.importLabelMapCollapsibleButton.collapsed = True
self.importLabelMapCollapsibleButton.enabled = False
self.importLabelMapCollapsibleButton.text = "Import from labelmap"
self.importLabelMapCollapsibleLayout = qt.QGridLayout(self.importLabelMapCollapsibleButton)
self.labelMapImportWidget = ImportLabelMapIntoSegmentationWidget()
self.labelMapImportWidget.addEventObserver(self.labelMapImportWidget.FailedEvent, self.onImportFailed)
self.labelMapImportWidget.addEventObserver(self.labelMapImportWidget.SuccessEvent, self.onLabelMapImportSuccessful)
self.labelMapImportWidget.segmentationNodeSelectorVisible = False
self.importLabelMapCollapsibleLayout.addWidget(self.labelMapImportWidget)
self.mainModuleWidgetLayout.addWidget(self.importLabelMapCollapsibleButton)
def setupImportSegmentation(self):
self.importSegmentationCollapsibleButton = ctk.ctkCollapsibleButton()
self.importSegmentationCollapsibleButton.collapsed = True
self.importSegmentationCollapsibleButton.enabled = False
self.importSegmentationCollapsibleButton.text = "Import from segmentation"
self.importSegmentsCollapsibleLayout = qt.QGridLayout(self.importSegmentationCollapsibleButton)
self.segmentImportWidget = CopySegmentBetweenSegmentationsWidget()
self.segmentImportWidget.addEventObserver(self.segmentImportWidget.FailedEvent, self.onImportFailed)
self.segmentImportWidget.addEventObserver(self.segmentImportWidget.SuccessEvent, self.onImportFinished)
self.segmentImportWidget.segmentationNodeSelectorEnabled = False
self.importSegmentsCollapsibleLayout.addWidget(self.segmentImportWidget)
self.mainModuleWidgetLayout.addWidget(self.importSegmentationCollapsibleButton)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
settingsCollapsibleButton = ctk.ctkCollapsibleButton()
settingsCollapsibleButton.text = "Slice View Annotations Settings"
self.layout.addWidget(settingsCollapsibleButton)
settingsVBoxLayout = qt.QVBoxLayout(settingsCollapsibleButton)
dataProbeInstance = slicer.modules.DataProbeInstance
if dataProbeInstance.infoWidget:
sliceAnnotationsFrame = dataProbeInstance.infoWidget.sliceAnnotations.window
settingsVBoxLayout.addWidget(sliceAnnotationsFrame)
self.parent.layout().addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
# Collapsible button
sitesCollapsibleButton = ctk.ctkCollapsibleButton()
sitesCollapsibleButton.text = "Sample Sites"
self.layout.addWidget(sitesCollapsibleButton)
# Layout within the collapsible button
sitesFormLayout = qt.QFormLayout(sitesCollapsibleButton)
# site buttons
buttons = []
self.sites = [
{
"label": "Web Console", "url": "http://localhost:1337"
},
{
"label": "Crowds Cure Cancer", "url": "http://cancer.crowds-cure.org"
},
{
"label": "Slicer Home Page", "url": "http://slicer.org"
},
{
"label": "MorphoSource", "url": "https://www.morphosource.org"
},
{
"label": "Slicer SampleData", "url": "https://www.slicer.org/wiki/SampleData"
},
{
"label": "SlicerMorph", "url": "https://slicermorph.github.io"
},
]
for site in self.sites:
button = qt.QPushButton(site["label"])
button.toolTip = "Open %s" % site["url"]
sitesFormLayout.addWidget(button)
onClick = lambda click, site=site: self.onSiteButtonClicked(site)
button.connect('clicked(bool)', onClick)
buttons.append(button)
button = qt.QPushButton("Close All")
button.toolTip = "Close all the web views"
button.connect('clicked(bool)', self.onCloseAll)
self.layout.addWidget(button)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
# Instantiate and connect widgets ...
# reload button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadButton = qt.QPushButton("Reload")
self.reloadButton.toolTip = "Reload this module."
self.reloadButton.name = "AtlasTests Reload"
self.layout.addWidget(self.reloadButton)
self.reloadButton.connect('clicked()', self.onReload)
# reload and test button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadAndTestButton = qt.QPushButton("Reload and Test")
self.reloadAndTestButton.toolTip = "Reload this module and then run the self tests."
self.layout.addWidget(self.reloadAndTestButton)
self.reloadAndTestButton.connect('clicked()', self.onReloadAndTest)
# Collapsible button
atlasTests = ctk.ctkCollapsibleButton()
atlasTests.text = "Atlas Tests"
self.layout.addWidget(atlasTests)
# Layout within the dummy collapsible button
dummyFormLayout = qt.QFormLayout(atlasTests)
# run Abdominal Test
self.abdominalAtlas = qt.QPushButton("Run Abdominal Test")
self.abdominalAtlas.toolTip = "Downloads abdominal atlas and loads it."
dummyFormLayout.addWidget(self.abdominalAtlas)
self.abdominalAtlas.connect('clicked(bool)', self.onAbdominalAtlas)
# run brain Test
self.brainAtlas = qt.QPushButton("Run Brain Test")
self.brainAtlas.toolTip = "Downloads brain atlas and loads it."
dummyFormLayout.addWidget(self.brainAtlas)
self.brainAtlas.connect('clicked(bool)', self.onBrainAtlas)
# run knee Test
self.kneeAtlas = qt.QPushButton("Run Knee Test")
self.kneeAtlas.toolTip = "Downloads knee atlas and loads it."
dummyFormLayout.addWidget(self.kneeAtlas)
self.kneeAtlas.connect('clicked(bool)', self.onKneeAtlas)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
# Collapsible button
self.avgvolumesCollapsibleButton = ctk.ctkCollapsibleButton()
self.avgvolumesCollapsibleButton.text = "Average Scalar Volumes"
self.layout.addWidget(self.avgvolumesCollapsibleButton)
# Layout within the averaging collapsible button
self.avgvolumesFormLayout = qt.QFormLayout(self.avgvolumesCollapsibleButton)
#
# the volume selector
#
self.inputFrame = qt.QFrame(self.avgvolumesCollapsibleButton)
self.inputFrame.setLayout(qt.QHBoxLayout())
self.avgvolumesFormLayout.addWidget(self.inputFrame)
self.inputSelector = qt.QLabel("Select input nodes: ", self.inputFrame)
self.inputFrame.layout().addWidget(self.inputSelector)
self.inputSelector = slicer.qMRMLCheckableNodeComboBox(self.inputFrame)
self.inputSelector.nodeTypes = ( ("vtkMRMLScalarVolumeNode"), "" )
self.inputSelector.addEnabled = True
self.inputSelector.removeEnabled = True
self.inputSelector.setMRMLScene( slicer.mrmlScene )
self.inputFrame.layout().addWidget(self.inputSelector)
self.outputFrame = qt.QFrame(self.avgvolumesCollapsibleButton)
self.outputFrame.setLayout(qt.QHBoxLayout())
self.avgvolumesFormLayout.addWidget(self.outputFrame)
self.outputSelector = qt.QLabel("Select output reference volume ", self.outputFrame)
self.outputFrame.layout().addWidget(self.outputSelector)
self.outputSelector = slicer.qMRMLNodeComboBox(self.outputFrame)
self.outputSelector.nodeTypes = ( ("vtkMRMLScalarVolumeNode"), "" )
self.outputSelector.setMRMLScene( slicer.mrmlScene )
self.outputFrame.layout().addWidget(self.outputSelector)
# Ok button
okButton = qt.QPushButton("Ok")
okButton.toolTip = "Average selected volumes"
self.avgvolumesFormLayout.addWidget(okButton)
okButton.connect('clicked(bool)', self.onApply)
# Add vertical spacer
self.layout.addStretch(1)
# Set local var as instance attribute
self.okButton = okButton
def setup(self):
super(SliceTrackerDisplacementChartPlugin, self).setup()
self.collapsibleButton = ctk.ctkCollapsibleButton()
self.collapsibleButton.text = "Plotting"
self.collapsibleButton.collapsed = 0
self.collapsibleButton.setLayout(qt.QGridLayout())
self.resetAndInitializeData()
self.showLegendCheckBox = qt.QCheckBox('Show legend')
self.showLegendCheckBox.setChecked(1)
self.collapsibleButton.layout().addWidget(self.showLegendCheckBox, 0,
0)
self.layout().addWidget(self.collapsibleButton)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# check box to trigger taking screen shots for later use in tutorials
#
self.enableScreenshotsFlagCheckBox = qt.QCheckBox()
self.enableScreenshotsFlagCheckBox.checked = 1
self.enableScreenshotsFlagCheckBox.setToolTip("If checked, take screen shots for tutorials. Use Save Data to write them to disk.")
parametersFormLayout.addRow("Enable Screenshots", self.enableScreenshotsFlagCheckBox)
#
# scale factor for screen shots
#
self.screenshotScaleFactorSliderWidget = ctk.ctkSliderWidget()
self.screenshotScaleFactorSliderWidget.singleStep = 1.0
self.screenshotScaleFactorSliderWidget.minimum = 1.0
self.screenshotScaleFactorSliderWidget.maximum = 50.0
self.screenshotScaleFactorSliderWidget.value = 1.0
self.screenshotScaleFactorSliderWidget.setToolTip("Set scale factor for the screen shots.")
parametersFormLayout.addRow("Screenshot scale factor", self.screenshotScaleFactorSliderWidget)
#
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run the algorithm."
self.applyButton.enabled = True
parametersFormLayout.addRow(self.applyButton)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
self.setupIcons()
iconSize = qt.QSize(36, 36)
self.createNewCaseButton = self.createButton(
"",
icon=self.newIcon,
iconSize=iconSize,
toolTip="Start a new case")
self.openCaseButton = self.createButton("",
icon=self.openIcon,
iconSize=iconSize,
toolTip="Open case")
self.closeCaseButton = self.createButton(
"",
icon=self.closeIcon,
iconSize=iconSize,
toolTip="Close case with resume support",
enabled=False)
self.setupCaseWatchBox()
self.casesRootDirectoryButton = self.createDirectoryButton(
text="Choose cases root location",
caption="Choose cases root location",
directory=self.getSetting('CasesRootLocation', self.MODULE_NAME))
self.caseRootDir = self.getSetting('CasesRootLocation',
self.MODULE_NAME)
self.caseDirectoryInformationArea = ctk.ctkCollapsibleButton()
self.caseDirectoryInformationArea.collapsed = True
self.caseDirectoryInformationArea.text = "Directory Settings"
self.directoryConfigurationLayout = qt.QGridLayout(
self.caseDirectoryInformationArea)
self.directoryConfigurationLayout.addWidget(
qt.QLabel("Cases Root Directory"), 1, 0, 1, 1)
self.directoryConfigurationLayout.addWidget(
self.casesRootDirectoryButton, 1, 1, 1, 1)
self.directoryConfigurationLayout.addWidget(self.caseWatchBox, 2, 0, 1,
qt.QSizePolicy.ExpandFlag)
self.caseGroupBox = qt.QGroupBox("Case")
self.caseGroupBoxLayout = qt.QFormLayout(self.caseGroupBox)
self.caseGroupBoxLayout.addWidget(
self.createHLayout([
self.createNewCaseButton, self.openCaseButton,
self.closeCaseButton
]))
self.caseGroupBoxLayout.addWidget(self.caseDirectoryInformationArea)
self.layout().addWidget(self.caseGroupBox)
super(ProstateAblationCaseManagerPlugin, self).setup()
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# Select landmark file to import
#
self.inputFileSelector = ctk.ctkPathLineEdit()
self.inputFileSelector.setToolTip( "Select surface image that will be imported as a segment for editing" )
parametersFormLayout.addRow("Select surface file to edit:", self.inputFileSelector)
#
# check box to trigger taking screen shots for later use in tutorials
#
self.enableScreenshotsFlagCheckBox = qt.QCheckBox()
self.enableScreenshotsFlagCheckBox.checked = 0
self.enableScreenshotsFlagCheckBox.setToolTip("If checked, take screen shots for tutorials. Use Save Data to write them to disk.")
parametersFormLayout.addRow("Enable Screenshots", self.enableScreenshotsFlagCheckBox)
#
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run the conversion."
self.applyButton.enabled = False
parametersFormLayout.addRow(self.applyButton)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
self.inputFileSelector.connect('validInputChanged(bool)', self.onSelectInput)
# Add vertical spacer
self.layout.addStretch(1)
# Refresh Apply button state
self.onSelectInput()
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# check box to trigger taking screen shots for later use in tutorials
#
self.enableScreenshotsFlagCheckBox = qt.QCheckBox()
self.enableScreenshotsFlagCheckBox.checked = 1
self.enableScreenshotsFlagCheckBox.setToolTip("If checked, take screen shots for tutorials. Use Save Data to write them to disk.")
parametersFormLayout.addRow("Enable Screenshots", self.enableScreenshotsFlagCheckBox)
#
# scale factor for screen shots
#
self.screenshotScaleFactorSliderWidget = ctk.ctkSliderWidget()
self.screenshotScaleFactorSliderWidget.singleStep = 1.0
self.screenshotScaleFactorSliderWidget.minimum = 1.0
self.screenshotScaleFactorSliderWidget.maximum = 50.0
self.screenshotScaleFactorSliderWidget.value = 1.0
self.screenshotScaleFactorSliderWidget.setToolTip("Set scale factor for the screen shots.")
parametersFormLayout.addRow("Screenshot scale factor", self.screenshotScaleFactorSliderWidget)
#
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run the algorithm."
self.applyButton.enabled = True
parametersFormLayout.addRow(self.applyButton)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Input Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# Input URL
#
self.InputURLText = qt.QLineEdit()
self.InputURLText.setToolTip("Copy and paste the URL in this box")
parametersFormLayout.addRow("URL: ", self.InputURLText)
#
# File Names
#
self.FileNameText = qt.QLineEdit()
self.FileNameText.setToolTip("Enter the file name")
parametersFormLayout.addRow("File name: ", self.FileNameText)
#
# Node Names
#
self.NodeNameText = qt.QLineEdit()
self.NodeNameText.setToolTip("Enter the node names")
parametersFormLayout.addRow("Node name: ", self.NodeNameText)
#
# Import button
#
self.ImportButton = qt.QPushButton("Import data")
self.ImportButton.toolTip = "Import data from URL"
self.ImportButton.enabled = False
parametersFormLayout.addRow(self.ImportButton)
# Connections
self.InputURLText.connect('textChanged(const QString &)',
self.onEnterURL)
self.ImportButton.connect('clicked(bool)', self.onImport)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Collapsible button
self.selectionCollapsibleButton = ctk.ctkCollapsibleButton()
self.selectionCollapsibleButton.text = "Selection"
self.layout.addWidget(self.selectionCollapsibleButton)
# Layout within the collapsible button
self.formLayout = qt.QFormLayout(self.selectionCollapsibleButton)
#
# the volume selectors
#
self.inputFrame = qt.QFrame(self.selectionCollapsibleButton)
self.inputFrame.setLayout(qt.QHBoxLayout())
self.formLayout.addWidget(self.inputFrame)
self.inputSelector = qt.QLabel("Input Vector Volume: ", self.inputFrame)
self.inputFrame.layout().addWidget(self.inputSelector)
self.inputSelector = slicer.qMRMLNodeComboBox(self.inputFrame)
self.inputSelector.nodeTypes = ["vtkMRMLVectorVolumeNode"]
self.inputSelector.addEnabled = False
self.inputSelector.removeEnabled = False
self.inputSelector.setMRMLScene( slicer.mrmlScene )
self.inputFrame.layout().addWidget(self.inputSelector)
self.outputFrame = qt.QFrame(self.selectionCollapsibleButton)
self.outputFrame.setLayout(qt.QHBoxLayout())
self.formLayout.addWidget(self.outputFrame)
self.outputSelector = qt.QLabel("Output Scalar Volume: ", self.outputFrame)
self.outputFrame.layout().addWidget(self.outputSelector)
self.outputSelector = slicer.qMRMLNodeComboBox(self.outputFrame)
self.outputSelector.nodeTypes = ["vtkMRMLScalarVolumeNode"]
self.outputSelector.setMRMLScene( slicer.mrmlScene )
self.outputSelector.addEnabled = True
self.outputSelector.renameEnabled = True
self.outputSelector.baseName = "Scalar Volume"
self.outputFrame.layout().addWidget(self.outputSelector)
# Apply button
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run Convert the vector to scalar."
self.formLayout.addWidget(self.applyButton)
self.applyButton.connect('clicked(bool)', self.onApply)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
# Instantiate and connect widgets ...
# reload button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadButton = qt.QPushButton("Reload")
self.reloadButton.toolTip = "Reload this module."
self.reloadButton.name = "sceneImport2428 Reload"
self.layout.addWidget(self.reloadButton)
self.reloadButton.connect('clicked()', self.onReload)
# test button
# (use this during development, but remove it when delivering
# your module to users)
self.testButton = qt.QPushButton("Test")
self.testButton.toolTip = "Run the self tests."
self.layout.addWidget(self.testButton)
self.testButton.connect('clicked()', self.onTest)
# reload and test button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadAndTestButton = qt.QPushButton("Reload and Test")
self.reloadAndTestButton.toolTip = "Reload this module and then run the self tests."
self.layout.addWidget(self.reloadAndTestButton)
self.reloadAndTestButton.connect('clicked()', self.onReloadAndTest)
# Collapsible button
dummyCollapsibleButton = ctk.ctkCollapsibleButton()
dummyCollapsibleButton.text = "A collapsible button"
self.layout.addWidget(dummyCollapsibleButton)
# Layout within the dummy collapsible button
dummyFormLayout = qt.QFormLayout(dummyCollapsibleButton)
# HelloWorld button
helloWorldButton = qt.QPushButton("Hello world")
helloWorldButton.toolTip = "Print 'Hello world' in standard ouput."
dummyFormLayout.addWidget(helloWorldButton)
helloWorldButton.connect('clicked(bool)', self.onHelloWorldButtonClicked)
# Add vertical spacer
self.layout.addStretch(1)
# Set local var as instance attribute
self.helloWorldButton = helloWorldButton
def setup(self):
super(SliceTrackerTrainingPlugin, self).setup()
self.collapsibleTrainingArea = ctk.ctkCollapsibleButton()
self.collapsibleTrainingArea.collapsed = True
self.collapsibleTrainingArea.text = "Training Incoming Data Simulation"
self.simulatePreopPhaseButton = self.createButton(
"Simulate preop reception", enabled=False)
self.simulateIntraopPhaseButton = self.createButton(
"Simulate intraop reception", enabled=False)
self.trainingsAreaLayout = qt.QGridLayout(self.collapsibleTrainingArea)
self.trainingsAreaLayout.addWidget(
self.createHLayout([
self.simulatePreopPhaseButton, self.simulateIntraopPhaseButton
]))
self.layout().addWidget(self.collapsibleTrainingArea)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# number of fiducials to add
#
self.numToAddSliderWidget = ctk.ctkSliderWidget()
self.numToAddSliderWidget.singleStep = 1.0
self.numToAddSliderWidget.minimum = 0.0
self.numToAddSliderWidget.maximum = 1000.0
self.numToAddSliderWidget.value = 100.0
self.numToAddSliderWidget.toolTip = "Set the number of fiducials to add."
parametersFormLayout.addRow("Number of Fiducials to Add", self.numToAddSliderWidget)
#
# check box to trigger fewer modify events, adding all the new points
# is wrapped inside of a StartModify/EndModify block
#
self.fewerModifyFlagCheckBox = qt.QCheckBox()
self.fewerModifyFlagCheckBox.checked = 0
self.fewerModifyFlagCheckBox.toolTip = 'If checked, wrap adding points inside of a StartModify - EndModify block'
parametersFormLayout.addRow("Fewer Modify Events", self.fewerModifyFlagCheckBox)
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run the algorithm."
self.applyButton.enabled = True
parametersFormLayout.addRow(self.applyButton)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
# Add vertical spacer
self.layout.addStretch(1)
def setupRegistrationResultsPlugin(self):
self.regResultsCollapsibleButton = ctk.ctkCollapsibleButton()
self.regResultsCollapsibleButton.collapsed = True
self.regResultsCollapsibleButton.text = "Registration Evaluation"
self.regResultsCollapsibleButton.hide()
self.regResultsCollapsibleLayout = qt.QGridLayout(
self.regResultsCollapsibleButton)
self.regResultsPlugin = SliceTrackerRegistrationResultsPlugin()
self.regResultsPlugin.addEventObserver(
self.regResultsPlugin.NoRegistrationResultsAvailable,
self.onNoRegistrationResultsAvailable)
self.regResultsPlugin.resultSelectorVisible = False
self.regResultsPlugin.titleVisible = False
self.regResultsPlugin.visualEffectsTitle = ""
self.regResultsPlugin.registrationTypeButtonsVisible = False
self.addPlugin(self.regResultsPlugin)
self.regResultsCollapsibleLayout.addWidget(self.regResultsPlugin)
def setup(self):
"""This is called one time when the module GUI is initialized
"""
ScriptedLoadableModuleWidget.setup(self)
# Just create a container for the widget
mainAreaCollapsibleButton = ctk.ctkCollapsibleButton()
mainAreaCollapsibleButton.text = "Main parameters"
self.layout.addWidget(mainAreaCollapsibleButton)
self.mainAreaLayout = qt.QVBoxLayout(mainAreaCollapsibleButton)
# self.viewer = MIPViewerWidget(mainAreaCollapsibleButton)
self.viewer = MIPViewerWidget(mainAreaCollapsibleButton,
MIPViewerWidget.CONTEXT_UNKNOWN)
self.viewer.setup()
# self.viewer.activateEnhacedVisualization(True)
self.layout.addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
self.runButton = qt.QPushButton("Run")
self.runButton.toolTip = "Run the algorithm."
self.runButton.enabled = True
parametersFormLayout.addRow(self.runButton)
self.runButton.connect('clicked(bool)', self.onApplyButton)
self.layout.addStretch(1)
def setup(self):
showPlusServerWidget = True
if _platform == "linux" or _platform == "linux2" or _platform == "darwin": #linux or linux or OS X
message = "Attention: You are running Slicer on Linux or OS X. Do you have PlusServer installed on the current OS?"
result = QMessageBox.question(slicer.util.mainWindow(),
'ProstateTRUSNav', message,
QMessageBox.Yes | QMessageBox.No)
showPlusServerWidget = result == QMessageBox.Yes
if _platform == "win32" or showPlusServerWidget:
# Windows...
plusServerCollapsibleButton = ctkCollapsibleButton()
plusServerCollapsibleButton.text = "PlusServer"
self.layout.addWidget(plusServerCollapsibleButton)
self.configurationFileChooserButton = QPushButton(
self.configurationFile)
self.configurationFileChooserButton.connect(
'clicked()', self.onConfigFileSelected)
self.runPlusServerButton = QPushButton("Run PlusServer")
self.runPlusServerButton.setCheckable(True)
self.runPlusServerButton.connect('clicked()',
self.onRunPlusServerButtonClicked)
self.serverFormLayout = QFormLayout(plusServerCollapsibleButton)
self.serverExecutableChooserButton = QPushButton(
self.serverExecutable)
self.serverExecutableChooserButton.connect(
'clicked()', self.onServerExecutableSelected)
hbox = QHBoxLayout()
hbox.addWidget(self.serverExecutableChooserButton)
self.serverFormLayout.addRow(hbox)
hbox = QHBoxLayout()
hbox.addWidget(self.configurationFileChooserButton)
hbox.addWidget(self.runPlusServerButton)
self.serverFormLayout.addRow(hbox)
GuideletWidget.setup(self)
# do specific setup here
if _platform == "win32" or showPlusServerWidget:
self.launchGuideletButton.setEnabled(False)
self.checkExecutableAndArgument()
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
# Collapsible button
testsCollapsibleButton = ctk.ctkCollapsibleButton()
testsCollapsibleButton.text = "SegmentEditorPETTumorSegmentationEffect Tests"
self.layout.addWidget(testsCollapsibleButton)
# Layout within the collapsible button
collapsibleButtonLayout = qt.QFormLayout(testsCollapsibleButton)
self.loadTestDataButton = qt.QPushButton("Download and load test data")
self.loadTestDataButton.connect('clicked(bool)', self.onLoadTestData)
collapsibleButtonLayout.addWidget(self.loadTestDataButton)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# input directory selector
#
with It(ctk.ctkPathLineEdit()) as w:
self.inputDirectorySelector = w
# make a directory-only, save dialog
w.filters = ctk.ctkPathLineEdit.Dirs | ctk.ctkPathLineEdit.Writable
parametersFormLayout.addRow("Input Directory: ", w)
#
# Apply Button
#
with It(qt.QPushButton("Apply")) as w:
self.applyButton = w
w.toolTip = "Run the algorithm."
w.enabled = False
parametersFormLayout.addRow(w)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
self.inputDirectorySelector.connect(
'currentPathChanged(const QString&)', self.reset)
# Add vertical spacer
self.layout.addStretch(1)
# Refresh Apply button state
self.onSelect()
def _addInputVolumeSection(self):
inputVolumeCollapsibleButton = ctk.ctkCollapsibleButton()
inputVolumeCollapsibleButton.text = 'Select Input Volume and Segmentation'
self.layout.addWidget(inputVolumeCollapsibleButton)
# Layout within the dummy collapsible button
inputVolumeFormLayout = qt.QFormLayout(inputVolumeCollapsibleButton)
#
# input volume selector
#
self.inputVolumeSelector = slicer.qMRMLNodeComboBox()
self.inputVolumeSelector.nodeTypes = ['vtkMRMLScalarVolumeNode']
self.inputVolumeSelector.selectNodeUponCreation = True
self.inputVolumeSelector.addEnabled = False
self.inputVolumeSelector.removeEnabled = False
self.inputVolumeSelector.noneEnabled = False
self.inputVolumeSelector.showHidden = False
self.inputVolumeSelector.showChildNodeTypes = False
self.inputVolumeSelector.setMRMLScene(slicer.mrmlScene)
self.inputVolumeSelector.setToolTip(
'Pick the input image for the feature calculation.')
inputVolumeFormLayout.addRow('Input Image Volume: ',
self.inputVolumeSelector)
#
# input mask volume selector
#
self.inputMaskSelector = slicer.qMRMLNodeComboBox()
self.inputMaskSelector.nodeTypes = [
'vtkMRMLLabelMapVolumeNode', 'vtkMRMLSegmentationNode'
]
self.inputMaskSelector.selectNodeUponCreation = True
self.inputMaskSelector.addEnabled = False
self.inputMaskSelector.removeEnabled = False
self.inputMaskSelector.noneEnabled = True
self.inputMaskSelector.showHidden = False
self.inputMaskSelector.showChildNodeTypes = False
self.inputMaskSelector.setMRMLScene(slicer.mrmlScene)
self.inputMaskSelector.setToolTip(
'Pick the regions for feature calculation - defined by a segmentation or labelmap volume node.'
)
inputVolumeFormLayout.addRow('Input regions: ', self.inputMaskSelector)
def create(self,registationState):
"""Make the plugin-specific user interface"""
super(AffineAndThinPlatePlugin,self).create(registationState)
#
# Thin Plate Spline Registration Pane
#
self.thinPlateCollapsibleButton = ctk.ctkCollapsibleButton()
self.thinPlateCollapsibleButton.text = "Affine And Thin Plate Spline Registration"
affineAndThinPlateFormLayout = qt.QFormLayout()
self.thinPlateCollapsibleButton.setLayout(affineAndThinPlateFormLayout)
self.widgets.append(self.thinPlateCollapsibleButton)
self.linearMode = "Rigid"
self.registrationModeBox = qt.QGroupBox("Registration Mode")
self.registrationModeBox.setLayout(qt.QFormLayout())
buttonLayout = qt.QVBoxLayout()
self.linearModeButtons = {}
self.linearModes = ("Rigid", "Similarity", "Affine")
for mode in self.linearModes:
self.linearModeButtons[mode] = qt.QRadioButton()
self.linearModeButtons[mode].text = mode
self.linearModeButtons[mode].setToolTip( "Run the registration in %s mode." % mode )
self.linearModeButtons[mode].connect('clicked()', lambda m=mode : self.onLinearTransform(m))
self.registrationModeBox.layout().addWidget(self.linearModeButtons[mode])
self.linearModeButtons[self.linearMode].checked = True
affineAndThinPlateFormLayout.addWidget(self.registrationModeBox)
self.hotUpdateButton = qt.QCheckBox("Hot Update")
affineAndThinPlateFormLayout.addWidget(self.hotUpdateButton)
self.widgets.append(self.hotUpdateButton)
self.exportGridButton = qt.QPushButton("Export to Grid Transform")
self.exportGridButton.toolTip = "To save this transform or use it in other Slicer modules you can export the current Thin Plate transform to a Grid Transform."
affineAndThinPlateFormLayout.addWidget(self.exportGridButton)
self.exportGridButton.connect("clicked()",self.onExportGrid)
self.widgets.append(self.exportGridButton)
self.parent.layout().addWidget(self.thinPlateCollapsibleButton)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
# Collapsible button
testsCollapsibleButton = ctk.ctkCollapsibleButton()
testsCollapsibleButton.text = "A collapsible button"
self.layout.addWidget(testsCollapsibleButton)
# Layout within the collapsible button
formLayout = qt.QFormLayout(testsCollapsibleButton)
# test buttons
testButton = qt.QPushButton("Reproduce issue 2590")
testButton.toolTip = "Run the test."
formLayout.addWidget(testButton)
testButton.connect('clicked(bool)', self.onPart3ChangeTracker)
# Add vertical spacer
self.layout.addStretch(1)
def _setupSubWidget(self):
if self._schema.get("collapsible") is True:
self._subWidget = ctk.ctkCollapsibleButton()
if self._schema.get("collapsed"):
self._subWidget.collapsed = self._schema.get("collapsed")
self._subWidget.contentsCollapsed.connect(self.onCollapsed)
else:
self._subWidget = qt.QGroupBox(self._title)
self.title = self._schema.get("title") if self._schema.get(
"title") else self._title
self._subWidget.setLayout(qt.QFormLayout())
self.layout().addWidget(self._subWidget)
if self._addRestoreDefaultsButton:
self._restoreDefaultsButton = UICreationHelpers.createButton(
"Restore defaults")
self.layout().addWidget(self._restoreDefaultsButton)
self._restoreDefaultsButton.clicked.connect(
self.restoreJSONDefaults)
def setup(self):
#ScriptedLoadableModuleWidget.setup(self)
self._mainGUIGroupBox = qt.QGroupBox()
self._collapsibleDirectoryConfigurationArea = ctk.ctkCollapsibleButton()
self.mainGUIGroupBoxLayout = qt.QGridLayout()
self._mainGUIGroupBox.setLayout(self.mainGUIGroupBoxLayout)
self.createNewCaseButton = self.createButton("New case")
self.openCaseButton = self.createButton("Open case")
self.closeCaseButton = self.createButton("Close case", toolTip="Close case without completing it", enabled=False)
self.completeCaseButton = self.createButton('Case completed', enabled=True)
self.mainGUIGroupBoxLayout.addWidget(self.createNewCaseButton, 1, 0)
self.mainGUIGroupBoxLayout.addWidget(self.openCaseButton, 1, 1)
self.mainGUIGroupBoxLayout.addWidget(self.completeCaseButton, 1, 2)
self.createPatientWatchBox()
#self.createIntraopWatchBox()
self.createCaseInformationArea()
self.setupConnections()
self.layout.addWidget(self._mainGUIGroupBox)
def setup(self):
# Instantiate and connect widgets ...
#
# Parameters Area
#
ScriptedLoadableModuleWidget.setup(self)
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
self.inputSelector = slicer.qMRMLNodeComboBox()
self.inputSelector.nodeTypes = ['vtkMRMLMultiVolumeNode']
self.inputSelector.addEnabled = True # Se habilita la posibildad al usuario de crear un nuevo nodo con este widget
self.inputSelector.removeEnabled = False # Se le quita al usuario la posibilidad de eliminar el nodo seleccionado en ese momento
self.inputSelector.setMRMLScene(slicer.mrmlScene)
parametersFormLayout.addRow("Node:", self.inputSelector)
self.parent.connect('mrmlSceneChanged(vtkMRMLScene*)',
self.inputSelector, 'setMRMLScene(vtkMRMLScene*)')
self.typeComboBox = ctk.ctkComboBox()
## self.typeComboBox.caption='Tipo de registro'
self.typeComboBox.addItem('Rigid')
self.typeComboBox.addItem('BSpline')
self.typeComboBox.addItem('Affine')
self.typeComboBox.addItem('Rigid-BSpline')
self.typeComboBox.addItem('Rigid-Affine')
parametersFormLayout.addRow('Tipo de registro:', self.typeComboBox)
##Boton Registro
self.buttonRegister = qt.QPushButton("Registrar")
self.buttonRegister.toolTip = "Run the algorithm."
self.buttonRegister.enabled = True
parametersFormLayout.addRow(self.buttonRegister)
self.buttonRegister.connect('clicked(bool)', self.registrarButton)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
self.inputDirectory=ctk.ctkPathLineEdit()
self.inputDirectory.filters=ctk.ctkPathLineEdit.Dirs
self.inputDirectory.setToolTip( "Select input directory" )
parametersFormLayout.addRow("Input folder:", self.inputDirectory)
self.outputDirectory=ctk.ctkPathLineEdit()
self.outputDirectory.filters=ctk.ctkPathLineEdit.Dirs
self.outputDirectory.setToolTip( "Select output directory")
parametersFormLayout.addRow("Output folder: ", self.outputDirectory)
#
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Convert."
self.applyButton.enabled = False
parametersFormLayout.addRow(self.applyButton)
# connections
self.inputDirectory.connect('validInputChanged(bool)', self.onSelect)
self.outputDirectory.connect('validInputChanged(bool)', self.onSelect)
self.applyButton.connect('clicked(bool)', self.onApplyButton)
# Add vertical spacer
self.layout.addStretch(1)
def setup(self):
"""
Called when the user opens the module the first time and the widget is initialized.
"""
ScriptedLoadableModuleWidget.setup(self)
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Markups"
self.layout.addWidget(parametersCollapsibleButton)
self.parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
self.fiducialsSelector = slicer.qMRMLNodeComboBox()
self.fiducialsSelector.nodeTypes = ["vtkMRMLMarkupsFiducialNode"]
self.fiducialsSelector.setMRMLScene(slicer.mrmlScene)
self.fiducialsSelector.setToolTip("Select fiducials to edit")
self.parametersFormLayout.addRow("Fiducials: ", self.fiducialsSelector)
self.curveSelector = slicer.qMRMLNodeComboBox()
self.curveSelector.nodeTypes = ["vtkMRMLMarkupsClosedCurveNode"]
self.curveSelector.setMRMLScene(slicer.mrmlScene)
self.curveSelector.setToolTip(
"Select curve that defines the edit region")
self.parametersFormLayout.addRow("Curve: ", self.curveSelector)
self.viewSelector = slicer.qMRMLNodeComboBox()
self.viewSelector.nodeTypes = ["vtkMRMLViewNode"]
self.viewSelector.setMRMLScene(slicer.mrmlScene)
self.viewSelector.setToolTip(
"Select view that defines the edit region")
self.parametersFormLayout.addRow("View: ", self.viewSelector)
self.editButton = qt.QPushButton("Edit")
#self.editButton.enabled = False
self.parametersFormLayout.addRow("", self.editButton)
# Add vertical spacer
self.layout.addStretch(1)
self.logic = MarkupEditorLogic()
self.editButton.connect("clicked()", self.onEditMarkups)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# This module is often used in developer mode, therefore
# collapse reload & test section by default.
if hasattr(self, "reloadCollapsibleButton"):
self.reloadCollapsibleButton.collapsed = True
self.logic = SelfTestsLogic(slicer.selfTests)
globals()['selfTests'] = self
#
# test list
#
self.testList = ctk.ctkCollapsibleButton(self.parent)
self.testList.setLayout(qt.QVBoxLayout())
self.testList.setText("Self Tests")
self.layout.addWidget(self.testList)
self.testList.collapsed = False
self.runAll = qt.QPushButton("Run All")
self.testList.layout().addWidget(self.runAll)
self.runAll.connect('clicked()', self.onRunAll)
self.testButtons = {}
self.testMapper = qt.QSignalMapper()
self.testMapper.connect('mapped(const QString&)', self.onRun)
testKeys = slicer.selfTests.keys()
testKeys.sort()
for test in testKeys:
self.testButtons[test] = qt.QPushButton(test)
self.testButtons[test].setToolTip(slicer.selfTests[test].__doc__)
self.testList.layout().addWidget(self.testButtons[test])
self.testMapper.setMapping(self.testButtons[test], test)
self.testButtons[test].connect('clicked()', self.testMapper,
'map()')
# Add spacer to layout
self.layout.addStretch(1)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
self._mainGUIGroupBox = qt.QGroupBox()
self._collapsibleDirectoryConfigurationArea = ctk.ctkCollapsibleButton()
self.mainGUIGroupBoxLayout = qt.QGridLayout()
self._mainGUIGroupBox.setLayout(self.mainGUIGroupBoxLayout)
self.createNewCaseButton = self.createButton("New case")
self.openCaseButton = self.createButton("Open case")
self.mainGUIGroupBoxLayout.addWidget(self.createNewCaseButton, 1, 0)
self.mainGUIGroupBoxLayout.addWidget(self.openCaseButton, 1, 1)
self.casesRootDirectoryButton = self.createDirectoryButton(text="Choose cases root location",
caption="Choose cases root location",
directory=self.getSetting('CasesRootLocation'))
self.rootDirectoryLabel = qt.QLabel('')
if self.getSetting('CasesRootLocation'):
self.rootDirectoryLabel = qt.QLabel(self.getSetting('CasesRootLocation'))
self.createPatientWatchBox()
self.setupConnections()
self.layout.addWidget(self._mainGUIGroupBox)
slicer.mrmlScene.AddObserver(slicer.vtkMRMLScene.StartImportEvent, self.StartCaseImportCallback)
slicer.mrmlScene.AddObserver(slicer.vtkMRMLScene.EndImportEvent, self.LoadCaseCompletedCallback)
def setup(self):
# Instantiate and connect widgets ...
# reload button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadButton = qt.QPushButton("Reload")
self.reloadButton.toolTip = "Reload this module."
self.reloadButton.name = "Slicer4Minute Reload"
self.layout.addWidget(self.reloadButton)
self.reloadButton.connect('clicked()', self.onReload)
# reload and test button
# (use this during development, but remove it when delivering
# your module to users)
self.reloadAndTestButton = qt.QPushButton("Reload and Test")
self.reloadAndTestButton.toolTip = "Reload this module and then run the self tests."
self.layout.addWidget(self.reloadAndTestButton)
self.reloadAndTestButton.connect('clicked()', self.onReloadAndTest)
# Collapsible button
dummyCollapsibleButton = ctk.ctkCollapsibleButton()
dummyCollapsibleButton.text = "A collapsible button"
self.layout.addWidget(dummyCollapsibleButton)
# Layout within the dummy collapsible button
dummyFormLayout = qt.QFormLayout(dummyCollapsibleButton)
# HelloWorld button
helloWorldButton = qt.QPushButton("Hello world")
helloWorldButton.toolTip = "Print 'Hello world' in standard output."
dummyFormLayout.addWidget(helloWorldButton)
helloWorldButton.connect('clicked(bool)',
self.onHelloWorldButtonClicked)
# Add vertical spacer
self.layout.addStretch(1)
# Set local var as instance attribute
self.helloWorldButton = helloWorldButton
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# a text input field for the input of patient's path. get path with self.displayText
#
self.textInputBox = qt.QLineEdit()
parametersFormLayout.addRow("Patient Path", self.textInputBox)
#
# Apply Button
#
self.applyButton = qt.QPushButton("Apply")
self.applyButton.toolTip = "Run the algorithm."
self.applyButton.enabled = False
parametersFormLayout.addRow(self.applyButton)
# connections
self.applyButton.connect('clicked(bool)', self.onApplyButton)
# Add vertical spacer
self.layout.addStretch(1)
# Refresh Apply button state
self.onSelect()
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
#
# input volume selector
#
self.inputSelector = slicer.qMRMLNodeComboBox()
self.inputSelector.nodeTypes = ["vtkMRMLScalarVolumeNode"]
self.inputSelector.selectNodeUponCreation = True
self.inputSelector.addEnabled = False
self.inputSelector.removeEnabled = False
self.inputSelector.noneEnabled = False
self.inputSelector.showHidden = False
self.inputSelector.showChildNodeTypes = False
self.inputSelector.setMRMLScene(slicer.mrmlScene)
self.inputSelector.setToolTip("Pick the input to the algorithm.")
parametersFormLayout.addRow("Input Volume: ", self.inputSelector)
# connections
self.inputSelector.connect("currentNodeChanged(vtkMRMLNode*)",
self.onSelect)
# Add vertical spacer
self.layout.addStretch(1)
# Refresh Table view state
self.onSelect(self.inputSelector.currentNode())
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
#
# Parameters Area
#
parametersCollapsibleButton = ctk.ctkCollapsibleButton()
parametersCollapsibleButton.text = "Parameters"
self.layout.addWidget(parametersCollapsibleButton)
# Layout within the dummy collapsible button
parametersFormLayout = qt.QFormLayout(parametersCollapsibleButton)
########################## add by zyl
# HelloWorld button
helloWorldButton = qt.QPushButton("Hello World!")
helloWorldButton.toolTip = "Print 'Hello World' in standard output."
parametersFormLayout.addWidget(helloWorldButton)
helloWorldButton.connect('clicked(bool)',
self.onHelloWorldButtonClicked)
# Add vertical spacer
self.layout.addStretch(1)
# Set local var as instance attribute
self.helloWorldButton = helloWorldButton
############ add a button for test
#Tree Test
treeButton = qt.QPushButton("Show the Tree")
treeButton.toolTip = "Print 'this is a tree button.'"
parametersFormLayout.addWidget(treeButton)
treeButton.connect('clicked(bool)', self.onTreeButtonClicked)
#treeButton.connect('clicked(bool)', self.onHelloWorldButtonClicked)
self.layout.addStretch(1)
self.treeButton = treeButton
def addNodesButton(self):
self.nodesButton = ctk.ctkCollapsibleButton()
self.nodesButton.text = 'Volumes'
self.layout.addWidget(self.nodesButton)
nodesLayout = qt.QFormLayout(self.nodesButton)
self.inputSelector = slicer.qMRMLNodeComboBox()
self.inputSelector.nodeTypes = ['vtkMRMLScalarVolumeNode']
self.inputSelector.addEnabled = False
self.inputSelector.removeEnabled = True
self.inputSelector.noneEnabled = False
self.inputSelector.setMRMLScene(slicer.mrmlScene)
self.inputSelector.currentNodeChanged.connect(
self.onVolumeSelectorModified)
nodesLayout.addRow('Input volume: ', self.inputSelector)
self.inputLabelSelector = slicer.qMRMLNodeComboBox()
self.inputLabelSelector.nodeTypes = [
'vtkMRMLLabelMapVolumeNode', 'vtkMRMLSegmentationNode'
]
self.inputLabelSelector.addEnabled = False
self.inputLabelSelector.removeEnabled = True
self.inputLabelSelector.noneEnabled = False
self.inputLabelSelector.setMRMLScene(slicer.mrmlScene)
self.inputLabelSelector.currentNodeChanged.connect(
self.onVolumeSelectorModified)
nodesLayout.addRow('Parcellation: ', self.inputLabelSelector)
self.outputSelector = slicer.qMRMLNodeComboBox()
self.outputSelector.nodeTypes = ['vtkMRMLScalarVolumeNode']
self.outputSelector.addEnabled = False
self.outputSelector.removeEnabled = True
self.outputSelector.noneEnabled = True
self.outputSelector.setMRMLScene(slicer.mrmlScene)
self.outputSelector.noneDisplay = 'Create new volume'
self.outputSelector.currentNodeChanged.connect(
self.onVolumeSelectorModified)
nodesLayout.addRow('Output volume: ', self.outputSelector)
def setup(self):
ScriptedLoadableModuleWidget.setup(self)
# Instantiate and connect widgets ...
# Collapsible button
dummyCollapsibleButton = ctk.ctkCollapsibleButton()
dummyCollapsibleButton.text = "A collapsible button"
self.layout.addWidget(dummyCollapsibleButton)
# Layout within the dummy collapsible button
dummyFormLayout = qt.QFormLayout(dummyCollapsibleButton)
# HelloWorld button
helloWorldButton = qt.QPushButton("Hello world")
helloWorldButton.toolTip = "Print 'Hello world' in standard output."
dummyFormLayout.addWidget(helloWorldButton)
helloWorldButton.connect('clicked(bool)', self.onHelloWorldButtonClicked)
# Add vertical spacer
self.layout.addStretch(1)
# Set local var as instance attribute
self.helloWorldButton = helloWorldButton
