def test_siblings(origin, repo_path):
sshurl = "ssh://push-remote.example.com"
httpurl1 = "http://remote1.example.com/location"
httpurl2 = "http://remote2.example.com/location"
# insufficient arguments
# we need a dataset to work at
with chpwd(repo_path): # not yet there
assert_raises(InsufficientArgumentsError,
siblings, 'add', url=httpurl1)
# prepare src
source = install(repo_path, source=origin, recursive=True)
# pollute config
depvar = 'remote.test-remote.datalad-publish-depends'
source.config.add(depvar, 'stupid', where='local')
# cannot configure unknown remotes as dependencies
res = siblings(
'configure',
dataset=source,
name="test-remote",
url=httpurl1,
publish_depends=['r1', 'r2'],
on_failure='ignore',
result_renderer=None)
assert_status('error', res)
eq_(res[0]['message'],
('unknown sibling(s) specified as publication dependency: %s',
set(('r1', 'r2'))))
# prior config was not changed by failed call above
eq_(source.config.get(depvar, None), 'stupid')
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1,
result_xfm='paths',
result_renderer=None)
eq_(res, [source.path])
assert_in("test-remote", source.repo.get_remotes())
eq_(httpurl1,
source.repo.get_remote_url("test-remote"))
# reconfiguring doesn't change anything
siblings('configure', dataset=source, name="test-remote",
url=httpurl1,
result_renderer=None)
assert_in("test-remote", source.repo.get_remotes())
eq_(httpurl1,
source.repo.get_remote_url("test-remote"))
# re-adding doesn't work
res = siblings('add', dataset=source, name="test-remote",
url=httpurl1, on_failure='ignore',
result_renderer=None)
assert_status('error', res)
# only after removal
res = siblings('remove', dataset=source, name="test-remote",
result_renderer=None)
assert_status('ok', res)
assert_not_in("test-remote", source.repo.get_remotes())
res = siblings('add', dataset=source, name="test-remote",
url=httpurl1, on_failure='ignore',
result_renderer=None)
assert_status('ok', res)
# add to another remote automagically taking it from the url
# and being in the dataset directory
with chpwd(source.path):
res = siblings('add', url=httpurl2,
result_renderer=None)
assert_result_count(
res, 1,
name="remote2.example.com", type='sibling')
assert_in("remote2.example.com", source.repo.get_remotes())
# don't fail with conflicting url, when using force:
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1 + "/elsewhere",
result_renderer=None)
assert_status('ok', res)
eq_(httpurl1 + "/elsewhere",
source.repo.get_remote_url("test-remote"))
# no longer a use case, I would need additional convincing that
# this is anyhow useful other then tripple checking other peoples
# errors. for an actual check use 'query'
# maybe it could be turned into a set of warnings when `configure`
# alters an existing setting, but then why call configure, if you
# want to keep the old values
#with assert_raises(RuntimeError) as cm:
# add_sibling(dataset=source, name="test-remote",
# url=httpurl1 + "/elsewhere")
#assert_in("""'test-remote' already exists with conflicting settings""",
# str(cm.exception))
## add a push url without force fails, since in a way the fetch url is the
## configured push url, too, in that case:
#with assert_raises(RuntimeError) as cm:
# add_sibling(dataset=source, name="test-remote",
# url=httpurl1 + "/elsewhere",
# pushurl=sshurl, force=False)
#assert_in("""'test-remote' already exists with conflicting settings""",
# str(cm.exception))
# add push url (force):
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1 + "/elsewhere",
pushurl=sshurl,
result_renderer=None)
assert_status('ok', res)
eq_(httpurl1 + "/elsewhere",
source.repo.get_remote_url("test-remote"))
eq_(sshurl,
source.repo.get_remote_url("test-remote", push=True))
# recursively:
for r in siblings(
'configure',
dataset=source, name="test-remote",
url=httpurl1 + "/%NAME",
pushurl=sshurl + "/%NAME",
recursive=True,
# we need to disable annex queries, as it will try to access
# the fake URL configured above
get_annex_info=False):
repo = GitRepo(r['path'], create=False)
assert_in("test-remote", repo.get_remotes())
url = repo.get_remote_url("test-remote")
pushurl = repo.get_remote_url("test-remote", push=True)
ok_(url.startswith(httpurl1 + '/' + basename(source.path)))
ok_(url.endswith(basename(repo.path)))
ok_(pushurl.startswith(sshurl + '/' + basename(source.path)))
ok_(pushurl.endswith(basename(repo.path)))
eq_(url, r['url'])
eq_(pushurl, r['pushurl'])
# recursively without template:
for r in siblings(
'configure',
dataset=source, name="test-remote-2",
url=httpurl1,
pushurl=sshurl,
recursive=True,
# we need to disable annex queries, as it will try to access
# the fake URL configured above
get_annex_info=False,
result_renderer=None):
repo = GitRepo(r['path'], create=False)
assert_in("test-remote-2", repo.get_remotes())
url = repo.get_remote_url("test-remote-2")
pushurl = repo.get_remote_url("test-remote-2", push=True)
ok_(url.startswith(httpurl1))
ok_(pushurl.startswith(sshurl))
if repo != source.repo:
ok_(url.endswith('/' + basename(repo.path)))
ok_(pushurl.endswith(basename(repo.path)))
eq_(url, r['url'])
eq_(pushurl, r['pushurl'])
def test_siblings(origin, repo_path):
sshurl = "ssh://push-remote.example.com"
httpurl1 = "http://remote1.example.com/location"
httpurl2 = "http://remote2.example.com/location"
# insufficient arguments
# we need a dataset to work at
with chpwd(repo_path): # not yet there
assert_raises(InsufficientArgumentsError,
siblings, 'add', url=httpurl1)
# prepare src
source = install(repo_path, source=origin, recursive=True)
# pollute config
depvar = 'remote.test-remote.datalad-publish-depends'
source.config.add(depvar, 'stupid', where='local')
# cannot configure unknown remotes as dependencies
res = siblings(
'configure',
dataset=source,
name="test-remote",
url=httpurl1,
publish_depends=['r1', 'r2'],
on_failure='ignore',
result_renderer=None)
assert_status('error', res)
eq_(res[0]['message'],
('unknown sibling(s) specified as publication dependency: %s',
set(('r1', 'r2'))))
# prior config was not changed by failed call above
eq_(source.config.get(depvar, None), 'stupid')
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1,
result_xfm='paths',
result_renderer=None)
eq_(res, [source.path])
assert_in("test-remote", source.repo.get_remotes())
eq_(httpurl1,
source.repo.get_remote_url("test-remote"))
# reconfiguring doesn't change anything
siblings('configure', dataset=source, name="test-remote",
url=httpurl1,
result_renderer=None)
assert_in("test-remote", source.repo.get_remotes())
eq_(httpurl1,
source.repo.get_remote_url("test-remote"))
# re-adding doesn't work
res = siblings('add', dataset=source, name="test-remote",
url=httpurl1, on_failure='ignore',
result_renderer=None)
assert_status('error', res)
# only after removal
res = siblings('remove', dataset=source, name="test-remote",
result_renderer=None)
assert_status('ok', res)
assert_not_in("test-remote", source.repo.get_remotes())
res = siblings('add', dataset=source, name="test-remote",
url=httpurl1, on_failure='ignore',
result_renderer=None)
assert_status('ok', res)
# add to another remote automagically taking it from the url
# and being in the dataset directory
with chpwd(source.path):
res = siblings('add', url=httpurl2,
result_renderer=None)
assert_result_count(
res, 1,
name="remote2.example.com", type='sibling')
assert_in("remote2.example.com", source.repo.get_remotes())
# don't fail with conflicting url, when using force:
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1 + "/elsewhere",
result_renderer=None)
assert_status('ok', res)
eq_(httpurl1 + "/elsewhere",
source.repo.get_remote_url("test-remote"))
# no longer a use case, I would need additional convincing that
# this is anyhow useful other then tripple checking other peoples
# errors. for an actual check use 'query'
# maybe it could be turned into a set of warnings when `configure`
# alters an existing setting, but then why call configure, if you
# want to keep the old values
#with assert_raises(RuntimeError) as cm:
# add_sibling(dataset=source, name="test-remote",
# url=httpurl1 + "/elsewhere")
#assert_in("""'test-remote' already exists with conflicting settings""",
# str(cm.exception))
## add a push url without force fails, since in a way the fetch url is the
## configured push url, too, in that case:
#with assert_raises(RuntimeError) as cm:
# add_sibling(dataset=source, name="test-remote",
# url=httpurl1 + "/elsewhere",
# pushurl=sshurl, force=False)
#assert_in("""'test-remote' already exists with conflicting settings""",
# str(cm.exception))
# add push url (force):
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1 + "/elsewhere",
pushurl=sshurl,
result_renderer=None)
assert_status('ok', res)
eq_(httpurl1 + "/elsewhere",
source.repo.get_remote_url("test-remote"))
eq_(sshurl,
source.repo.get_remote_url("test-remote", push=True))
# recursively:
for r in siblings(
'configure',
dataset=source, name="test-remote",
url=httpurl1 + "/%NAME",
pushurl=sshurl + "/%NAME",
recursive=True,
# we need to disable annex queries, as it will try to access
# the fake URL configured above
get_annex_info=False):
repo = GitRepo(r['path'], create=False)
assert_in("test-remote", repo.get_remotes())
url = repo.get_remote_url("test-remote")
pushurl = repo.get_remote_url("test-remote", push=True)
ok_(url.startswith(httpurl1 + '/' + basename(source.path)))
ok_(url.endswith(basename(repo.path)))
ok_(pushurl.startswith(sshurl + '/' + basename(source.path)))
ok_(pushurl.endswith(basename(repo.path)))
eq_(url, r['url'])
eq_(pushurl, r['pushurl'])
# recursively without template:
for r in siblings(
'configure',
dataset=source, name="test-remote-2",
url=httpurl1,
pushurl=sshurl,
recursive=True,
# we need to disable annex queries, as it will try to access
# the fake URL configured above
get_annex_info=False,
result_renderer=None):
repo = GitRepo(r['path'], create=False)
assert_in("test-remote-2", repo.get_remotes())
url = repo.get_remote_url("test-remote-2")
pushurl = repo.get_remote_url("test-remote-2", push=True)
ok_(url.startswith(httpurl1))
ok_(pushurl.startswith(sshurl))
# FIXME: next condition used to compare the *Repo objects instead of
# there paths. Due to missing annex-init in
# datalad/tests/utils.py:clone_url this might not be the same, since
# `source` actually is an annex, but after flavor 'clone' in
# `with_testrepos` and then `install` any trace of an annex might be
# gone in v5 (branch 'master' only), while in direct mode it still is
# considered an annex. `repo` is forced to be a `GitRepo`, so we might
# compare two objects of different classes while they actually are
# pointing to the same repository.
# See github issue #1854
if repo.path != source.repo.path:
ok_(url.endswith('/' + basename(repo.path)))
ok_(pushurl.endswith(basename(repo.path)))
eq_(url, r['url'])
eq_(pushurl, r['pushurl'])
def test_siblings(origin, repo_path, local_clone_path):
sshurl = "ssh://push-remote.example.com"
httpurl1 = "http://remote1.example.com/location"
httpurl2 = "http://remote2.example.com/location"
# insufficient arguments
# we need a dataset to work at
with chpwd(repo_path): # not yet there
assert_raises(InsufficientArgumentsError,
siblings, 'add', url=httpurl1)
# prepare src
source = install(repo_path, source=origin, recursive=True)
# pollute config
depvar = 'remote.test-remote.datalad-publish-depends'
source.config.add(depvar, 'stupid', where='local')
# cannot configure unknown remotes as dependencies
res = siblings(
'configure',
dataset=source,
name="test-remote",
url=httpurl1,
publish_depends=['r1', 'r2'],
on_failure='ignore',
result_renderer=None)
assert_status('error', res)
eq_(res[0]['message'],
('unknown sibling(s) specified as publication dependency: %s',
set(('r1', 'r2'))))
# prior config was not changed by failed call above
eq_(source.config.get(depvar, None), 'stupid')
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1,
result_xfm='paths',
result_renderer=None)
eq_(res, [source.path])
assert_in("test-remote", source.repo.get_remotes())
eq_(httpurl1,
source.repo.get_remote_url("test-remote"))
# reconfiguring doesn't change anything
siblings('configure', dataset=source, name="test-remote",
url=httpurl1,
result_renderer=None)
assert_in("test-remote", source.repo.get_remotes())
eq_(httpurl1,
source.repo.get_remote_url("test-remote"))
# re-adding doesn't work
res = siblings('add', dataset=source, name="test-remote",
url=httpurl1, on_failure='ignore',
result_renderer=None)
assert_status('error', res)
# only after removal
res = siblings('remove', dataset=source, name="test-remote",
result_renderer=None)
assert_status('ok', res)
assert_not_in("test-remote", source.repo.get_remotes())
res = siblings('add', dataset=source, name="test-remote",
url=httpurl1, on_failure='ignore',
result_renderer=None)
assert_status('ok', res)
# add to another remote automagically taking it from the url
# and being in the dataset directory
with chpwd(source.path):
res = siblings('add', url=httpurl2,
result_renderer=None)
assert_result_count(
res, 1,
name="remote2.example.com", type='sibling')
assert_in("remote2.example.com", source.repo.get_remotes())
# don't fail with conflicting url, when using force:
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1 + "/elsewhere",
result_renderer=None)
assert_status('ok', res)
eq_(httpurl1 + "/elsewhere",
source.repo.get_remote_url("test-remote"))
# no longer a use case, I would need additional convincing that
# this is anyhow useful other then tripple checking other peoples
# errors. for an actual check use 'query'
# maybe it could be turned into a set of warnings when `configure`
# alters an existing setting, but then why call configure, if you
# want to keep the old values
#with assert_raises(RuntimeError) as cm:
# add_sibling(dataset=source, name="test-remote",
# url=httpurl1 + "/elsewhere")
#assert_in("""'test-remote' already exists with conflicting settings""",
# str(cm.exception))
## add a push url without force fails, since in a way the fetch url is the
## configured push url, too, in that case:
#with assert_raises(RuntimeError) as cm:
# add_sibling(dataset=source, name="test-remote",
# url=httpurl1 + "/elsewhere",
# pushurl=sshurl, force=False)
#assert_in("""'test-remote' already exists with conflicting settings""",
# str(cm.exception))
# add push url (force):
res = siblings('configure',
dataset=source, name="test-remote",
url=httpurl1 + "/elsewhere",
pushurl=sshurl,
result_renderer=None)
assert_status('ok', res)
eq_(httpurl1 + "/elsewhere",
source.repo.get_remote_url("test-remote"))
eq_(sshurl,
source.repo.get_remote_url("test-remote", push=True))
# recursively:
for r in siblings(
'configure',
dataset=source, name="test-remote",
url=httpurl1 + "/%NAME",
pushurl=sshurl + "/%NAME",
recursive=True,
# we need to disable annex queries, as it will try to access
# the fake URL configured above
get_annex_info=False):
repo = GitRepo(r['path'], create=False)
assert_in("test-remote", repo.get_remotes())
url = repo.get_remote_url("test-remote")
pushurl = repo.get_remote_url("test-remote", push=True)
ok_(url.startswith(httpurl1 + '/' + basename(source.path)))
ok_(url.endswith(basename(repo.path)))
ok_(pushurl.startswith(sshurl + '/' + basename(source.path)))
ok_(pushurl.endswith(basename(repo.path)))
eq_(url, r['url'])
eq_(pushurl, r['pushurl'])
# recursively without template:
for r in siblings(
'configure',
dataset=source, name="test-remote-2",
url=httpurl1,
pushurl=sshurl,
recursive=True,
# we need to disable annex queries, as it will try to access
# the fake URL configured above
get_annex_info=False,
result_renderer=None):
repo = GitRepo(r['path'], create=False)
assert_in("test-remote-2", repo.get_remotes())
url = repo.get_remote_url("test-remote-2")
pushurl = repo.get_remote_url("test-remote-2", push=True)
ok_(url.startswith(httpurl1))
ok_(pushurl.startswith(sshurl))
# FIXME: next condition used to compare the *Repo objects instead of
# there paths. Due to missing annex-init in
# datalad/tests/utils.py:clone_url this might not be the same, since
# `source` actually is an annex, but after flavor 'clone' in
# `with_testrepos` and then `install` any trace of an annex might be
# gone in v5 (branch 'master' only), while in direct mode it still is
# considered an annex. `repo` is forced to be a `GitRepo`, so we might
# compare two objects of different classes while they actually are
# pointing to the same repository.
# See github issue #1854
if repo.path != source.repo.path:
ok_(url.endswith('/' + basename(repo.path)))
ok_(pushurl.endswith(basename(repo.path)))
eq_(url, r['url'])
eq_(pushurl, r['pushurl'])
# recursively without template and pushurl but full "hierarchy"
# to a local clone
for r in siblings(
'configure',
dataset=source,
name="test-remote-3",
url=local_clone_path,
recursive=True,
# we need to disable annex queries, as it will try to access
# the fake URL configured above
get_annex_info=False,
result_renderer=None):
repo = GitRepo(r['path'], create=False)
assert_in("test-remote-3", repo.get_remotes())
url = repo.get_remote_url("test-remote-3")
pushurl = repo.get_remote_url("test-remote-3", push=True)
eq_(normpath(url),
normpath(opj(local_clone_path,
relpath(str(r['path']), source.path))))
# https://github.com/datalad/datalad/issues/3951
ok_(not pushurl) # no pushurl should be defined