def construct_single_ply_piece(self, fraction=1.0):
"""Construct a ply piece for shape A (trapezium)"""
th_nom = np.radians(self.fiber_angle)
# Step 1: Define origin line L0
origin_point = Point2D(self.starting_position, 0.0)
L0 = Line2D.from_point_angle(origin_point, th_nom)
# Step 2: Define line L2, perpendicular to L0, tangent to circle s4
tangent_point = Point2D.from_polar(self.cg.s4, th_nom)
L2 = Line2D.from_point_angle(tangent_point, th_nom + np.pi / 2)
P0 = L0.intersection_line(L2)
# Step 3: Position P2 and P3 based on max_width and eccentricity
P2_dist = self.max_width * self.eccentricity
P3_dist = self.max_width * (1 - self.eccentricity)
P2 = P0 + Point2D.from_polar(P2_dist, L2.angle())
P3 = P0 + Point2D.from_polar(P3_dist, L2.angle() + np.pi)
# Step 4: Calculate the spanned angle (both deltas should be >= 0)
T2 = L0.intersection_circle_near(P2.norm(), P0)
T3 = L0.intersection_circle_near(P3.norm(), P0)
delta_phi_1 = fraction * (P2.angle() - T2.angle())
delta_phi_2 = fraction * (T3.angle() - P3.angle())
# Step 5: Calculate the side lines L1 and L3
L1 = L0.rotate(delta_phi_1)
L3 = L0.rotate(-delta_phi_2)
near_pt = Point2D(self.cg.s1, 0)
P1a = L1.intersection_circle_near(self.cg.s1, near_pt)
P4a = L3.intersection_circle_near(self.cg.s1, near_pt)
# Redefine P2 and P3 if needed (for rest pieces)
if fraction != 1.0:
P2 = L2.intersection_line(L1)
P3 = L2.intersection_line(L3)
# Step 6: Construct L4, parallel to L2, through either P1a or P4a,
# whichever is furthest from L2
if L2.distance_point(P1a) > L2.distance_point(P4a):
L4_through_point = P1a
else:
L4_through_point = P4a
L4 = Line2D.from_point_angle(L4_through_point, L2.angle())
# now redefine P1 and P4 as the intersection points:
P1b = L4.intersection_line(L1)
P4b = L4.intersection_line(L3)
ip_L1_L3 = L1.intersection_line(L3)
if L2.distance_point(ip_L1_L3) < L2.distance_point(P4b):
# Line segments L1 and L3 intersect within the polygon, so we have
# a 'hourglass' shape. Move P1 and P4 to the intersection point,
# effectively forming a triangle. We could just drop P4, if not
# for some other code expeccting 4-point polygons.
P1, P4 = ip_L1_L3, ip_L1_L3
else:
P1, P4 = P1b, P4b
# Step 7: Return the final ply piece
return PlyPiece(Polygon2D((P1, P2, P3, P4)), 0.0, -delta_phi_2,
delta_phi_1)
def construct_single_ply_piece(self, fraction=1.0):
"""Construct a ply piece for shape A (trapezium)"""
th_nom = np.radians(self.fiber_angle)
# Step 1: Define origin line L0
origin_point = Point2D(self.starting_position, 0.0)
L0 = Line2D.from_point_angle(origin_point, th_nom)
# Step 2: Define line L2, perpendicular to L0, tangent to circle s4
tangent_point = Point2D.from_polar(self.cg.s4, th_nom)
L2 = Line2D.from_point_angle(tangent_point, th_nom + np.pi/2)
P0 = L0.intersection_line(L2)
# Step 3: Position P2 and P3 based on max_width and eccentricity
P2_dist = self.max_width * self.eccentricity
P3_dist = self.max_width * (1 - self.eccentricity)
P2 = P0 + Point2D.from_polar(P2_dist, L2.angle())
P3 = P0 + Point2D.from_polar(P3_dist, L2.angle() + np.pi)
# Step 4: Calculate the spanned angle (both deltas should be >= 0)
T2 = L0.intersection_circle_near(P2.norm(), P0)
T3 = L0.intersection_circle_near(P3.norm(), P0)
delta_phi_1 = fraction*(P2.angle() - T2.angle())
delta_phi_2 = fraction*(T3.angle() - P3.angle())
# Step 5: Calculate the side lines L1 and L3
L1 = L0.rotate(delta_phi_1)
L3 = L0.rotate(-delta_phi_2)
near_pt = Point2D(self.cg.s1, 0)
P1a = L1.intersection_circle_near(self.cg.s1, near_pt)
P4a = L3.intersection_circle_near(self.cg.s1, near_pt)
# Redefine P2 and P3 if needed (for rest pieces)
if fraction != 1.0:
P2 = L2.intersection_line(L1)
P3 = L2.intersection_line(L3)
# Step 6: Construct L4, parallel to L2, through either P1a or P4a,
# whichever is furthest from L2
if L2.distance_point(P1a) > L2.distance_point(P4a):
L4_through_point = P1a
else:
L4_through_point = P4a
L4 = Line2D.from_point_angle(L4_through_point, L2.angle())
# now redefine P1 and P4 as the intersection points:
P1b = L4.intersection_line(L1)
P4b = L4.intersection_line(L3)
ip_L1_L3 = L1.intersection_line(L3)
if L2.distance_point(ip_L1_L3) < L2.distance_point(P4b):
# Line segments L1 and L3 intersect within the polygon, so we have
# a 'hourglass' shape. Move P1 and P4 to the intersection point,
# effectively forming a triangle. We could just drop P4, if not
# for some other code expeccting 4-point polygons.
P1, P4 = ip_L1_L3, ip_L1_L3
else:
P1, P4 = P1b, P4b
# Step 7: Return the final ply piece
return PlyPiece(Polygon2D((P1, P2, P3, P4)), 0.0, -delta_phi_2, delta_phi_1)
def _useful_polygon(self, ply_piece=None):
# Internal function to get a polygon representing the section of a
# ply piece that overlaps with the useful area of the cone (between s2
# and s3). Additionally, return the points on s2 and s3 separately.
if ply_piece is None:
ply_piece = self.base_piece
# Re-use cached value if possible, for performance
if ply_piece in self._useful_polygon_cache:
return self._useful_polygon_cache[ply_piece]
P1, P2, P3, P4 = ply_piece.polygon.points()
phi_nom = ply_piece.phi_nom
L1 = Line2D.from_points(P1, P2)
L3 = Line2D.from_points(P3, P4)
points = []
# Define a quick helper function that will be useful later
def make_intersection(L, s):
return L.intersection_circle_near(s,
Point2D.from_polar(s, phi_nom))
# Add the intersection with s2 near P1
if P1.norm() > self.cg.s2:
# P1 is inside the useful area, add it as well
L4 = Line2D.from_points(P4, P1)
points.append(make_intersection(L4, self.cg.s2))
points.append(P1)
else:
# P1 is outside the useful area
points.append(make_intersection(L1, self.cg.s2))
# Add the intersection points with s3
pts_on_s3 = (make_intersection(L1, self.cg.s3),
make_intersection(L3, self.cg.s3))
points.extend(pts_on_s3)
# Add the intersection with s2 near P4
if P4.norm() > self.cg.s2:
# P4 is inside the useful area, add it as well
points.append(P4)
L4 = Line2D.from_points(P4, P1)
points.append(make_intersection(L4, self.cg.s2))
else:
# P4 is outside the useful area
points.append(make_intersection(L3, self.cg.s2))
pts_on_s2 = (points[0], points[-1])
retval = (Polygon2D(points), pts_on_s2, pts_on_s3)
self._useful_polygon_cache[ply_piece] = retval
return retval
def _useful_polygon(self, ply_piece=None):
# Internal function to get a polygon representing the section of a
# ply piece that overlaps with the useful area of the cone (between s2
# and s3). Additionally, return the points on s2 and s3 separately.
if ply_piece is None:
ply_piece = self.base_piece
# Re-use cached value if possible, for performance
if ply_piece in self._useful_polygon_cache:
return self._useful_polygon_cache[ply_piece]
P1, P2, P3, P4 = ply_piece.polygon.points()
phi_nom = ply_piece.phi_nom
L1 = Line2D.from_points(P1, P2)
L3 = Line2D.from_points(P3, P4)
points = []
# Define a quick helper function that will be useful later
def make_intersection(L, s):
return L.intersection_circle_near(s, Point2D.from_polar(s, phi_nom))
# Add the intersection with s2 near P1
if P1.norm() > self.cg.s2:
# P1 is inside the useful area, add it as well
L4 = Line2D.from_points(P4, P1)
points.append(make_intersection(L4, self.cg.s2))
points.append(P1)
else:
# P1 is outside the useful area
points.append(make_intersection(L1, self.cg.s2))
# Add the intersection points with s3
pts_on_s3 = (make_intersection(L1, self.cg.s3),
make_intersection(L3, self.cg.s3))
points.extend(pts_on_s3)
# Add the intersection with s2 near P4
if P4.norm() > self.cg.s2:
# P4 is inside the useful area, add it as well
points.append(P4)
L4 = Line2D.from_points(P4, P1)
points.append(make_intersection(L4, self.cg.s2))
else:
# P4 is outside the useful area
points.append(make_intersection(L3, self.cg.s2))
pts_on_s2 = (points[0], points[-1])
retval = (Polygon2D(points), pts_on_s2, pts_on_s3)
self._useful_polygon_cache[ply_piece] = retval
return retval
def ratio_continuous_fibers(self):
"""Get the ratio of continuous fibers, i.e. the fraction of the fibers
at the bottom edge (radius s3) that reach the top edge (radius s2).
Returns
-------
ratio : float
The ratio of continuous fibers
"""
_, pts_on_s2, pts_on_s3 = self._useful_polygon()
th_nom = np.radians(self.fiber_angle)
cont_length_1 = Line2D.from_point_angle(pts_on_s2[0], th_nom).distance_point(pts_on_s2[1])
cont_length_2 = Line2D.from_point_angle(pts_on_s3[0], th_nom).distance_point(pts_on_s3[1])
return cont_length_1 / cont_length_2
def ratio_continuous_fibers(self):
"""Get the ratio of continuous fibers, i.e. the fraction of the fibers
at the bottom edge (radius s3) that reach the top edge (radius s2).
Returns
-------
ratio : float
The ratio of continuous fibers
"""
_, pts_on_s2, pts_on_s3 = self._useful_polygon()
th_nom = np.radians(self.fiber_angle)
cont_length_1 = Line2D.from_point_angle(
pts_on_s2[0], th_nom).distance_point(pts_on_s2[1])
cont_length_2 = Line2D.from_point_angle(
pts_on_s3[0], th_nom).distance_point(pts_on_s3[1])
return cont_length_1 / cont_length_2
def construct_single_ply_piece(self, fraction=1.0):
"""Construct a ply piece for shape C (rectangle)"""
th_nom = np.radians(self.fiber_angle)
# Define origin line L0
origin_point = Point2D(self.starting_position, 0.0)
L0 = Line2D.from_point_angle(origin_point, th_nom)
# Define line L4
L4 = Line2D.from_point_angle(Point2D(0.0, 0.0), th_nom + np.pi / 2)
ip_L0_L4 = L0.intersection_line(L4)
# Construct P1 and P4
P1_dist = self.max_width * self.eccentricity
P4_dist = self.max_width * (1 - self.eccentricity)
P1 = ip_L0_L4 + Point2D.from_polar(P1_dist, L4.angle())
P4 = ip_L0_L4 + Point2D.from_polar(P4_dist, L4.angle() + np.pi)
# Construct side lines L1, L3, parallel to L0
L1 = Line2D.from_point_angle(P1, L0.angle())
L3 = Line2D.from_point_angle(P4, L0.angle())
# Intersection points L0, L1, L3 with circle
P0 = L0.intersection_circle_near(self.cg.s4, origin_point)
P2 = L1.intersection_circle_near(self.cg.s4, P0)
P3 = L3.intersection_circle_near(self.cg.s4, P0)
# Handle creation of rest pieces, with fraction < 1.0
delta_phi_1 = (P2.angle() - P0.angle())
delta_phi_2 = (P0.angle() - P3.angle())
if fraction != 1.0:
P2 = P2.rotate((fraction - 1.0) * delta_phi_1)
P3 = P3.rotate((1.0 - fraction) * delta_phi_2)
L1 = Line2D.from_point_angle(P2, L1.angle())
L3 = Line2D.from_point_angle(P3, L3.angle())
P1 = L4.intersection_line(L1)
P4 = L4.intersection_line(L3)
delta_phi_1 *= fraction
delta_phi_2 *= fraction
# Construct L2 through P2 or P3, whichever is furthest from L4
# Adjust the other point
if L4.distance_point(P2) > L4.distance_point(P3):
L2 = Line2D.from_point_angle(P2, L4.angle())
P3 = L2.intersection_line(L3)
else:
L2 = Line2D.from_point_angle(P3, L4.angle())
P2 = L2.intersection_line(L1)
# Return the final ply piece
return PlyPiece(Polygon2D((P1, P2, P3, P4)), 0.0, -delta_phi_2,
delta_phi_1)
def plotPlyPieces(self, state):
L0 = Line2D.from_point_angle(Point2D(self.start, 0.0),
math.radians(self.angle))
if len(L0.all_intersections_circle(self.data_handle.cg.s1)) == 0:
ErrorMsg = QtGui.QMessageBox.critical(
self, 'Error',
"The Start Value is too high for this Fiber Angle. \n The fibers do not reach to the upper cone edge.",
QtGui.QMessageBox.Ok, QtGui.QMessageBox.Ok)
return
model = self.buildModel()
# Evaluate the model
Phi = model.corner_orientations()
num_pieces = model.num_pieces()
A_piece = model.ply_piece_area()
A_ply = A_piece * num_pieces
R_DoC = A_ply / self.data_handle.cg.cone_area
Aeff = model.effective_area()[0]
R_Aeff = Aeff / A_piece
R_cont = model.ratio_continuous_fibers()
R_total = R_DoC * R_Aeff * R_cont
R_SumAeff = R_DoC * R_Aeff
result = GUIHandle.Result(angle=self.angle,
start=self.start,
width=self.width,
var=self.var,
Phi1=Phi[0],
Phi2=Phi[1],
Phi3=Phi[2],
Phi4=Phi[3],
num_pieces=num_pieces,
R_DoC=R_DoC,
R_Aeff=R_Aeff,
R_cont=R_cont,
R_SumAeff=R_SumAeff,
R_total=R_total)
self.plot_window = PlotWindow()
if self.type == 1:
self.printLP(model, self.plot_window.qmc.fig)
elif self.type == 2:
self.printAngleThickness(model, self.plot_window.qmc.fig, True)
elif self.type == 3:
self.printAngleThickness(model, self.plot_window.qmc.fig, False)
else:
assert False
self.plot_window.show()
self.result_window = ResultTable(model, result)
def construct_single_ply_piece(self, fraction=1.0):
"""Construct a ply piece for shape C (rectangle)"""
th_nom = np.radians(self.fiber_angle)
# Define origin line L0
origin_point = Point2D(self.starting_position, 0.0)
L0 = Line2D.from_point_angle(origin_point, th_nom)
# Define line L4
L4 = Line2D.from_point_angle(Point2D(0.0, 0.0), th_nom + np.pi/2)
ip_L0_L4 = L0.intersection_line(L4)
# Construct P1 and P4
P1_dist = self.max_width * self.eccentricity
P4_dist = self.max_width * (1 - self.eccentricity)
P1 = ip_L0_L4 + Point2D.from_polar(P1_dist, L4.angle())
P4 = ip_L0_L4 + Point2D.from_polar(P4_dist, L4.angle() + np.pi)
# Construct side lines L1, L3, parallel to L0
L1 = Line2D.from_point_angle(P1, L0.angle())
L3 = Line2D.from_point_angle(P4, L0.angle())
# Intersection points L0, L1, L3 with circle
P0 = L0.intersection_circle_near(self.cg.s4, origin_point)
P2 = L1.intersection_circle_near(self.cg.s4, P0)
P3 = L3.intersection_circle_near(self.cg.s4, P0)
# Handle creation of rest pieces, with fraction < 1.0
delta_phi_1 = (P2.angle() - P0.angle())
delta_phi_2 = (P0.angle() - P3.angle())
if fraction != 1.0:
P2 = P2.rotate((fraction - 1.0) * delta_phi_1)
P3 = P3.rotate((1.0 - fraction) * delta_phi_2)
L1 = Line2D.from_point_angle(P2, L1.angle())
L3 = Line2D.from_point_angle(P3, L3.angle())
P1 = L4.intersection_line(L1)
P4 = L4.intersection_line(L3)
delta_phi_1 *= fraction
delta_phi_2 *= fraction
# Construct L2 through P2 or P3, whichever is furthest from L4
# Adjust the other point
if L4.distance_point(P2) > L4.distance_point(P3):
L2 = Line2D.from_point_angle(P2, L4.angle())
P3 = L2.intersection_line(L3)
else:
L2 = Line2D.from_point_angle(P3, L4.angle())
P2 = L2.intersection_line(L1)
# Return the final ply piece
return PlyPiece(Polygon2D((P1, P2, P3, P4)), 0.0, -delta_phi_2, delta_phi_1)
def plotPlyPieces(self, state):
L0 = Line2D.from_point_angle(Point2D(self.start, 0.0), math.radians(self.angle))
if len(L0.all_intersections_circle(self.data_handle.cg.s1)) == 0:
ErrorMsg = QtGui.QMessageBox.critical(self, 'Error',
"The Start Value is too high for this Fiber Angle. \n The fibers do not reach to the upper cone edge.",
QtGui.QMessageBox.Ok, QtGui.QMessageBox.Ok)
return
model = self.buildModel()
# Evaluate the model
Phi = model.corner_orientations()
num_pieces = model.num_pieces()
A_piece = model.ply_piece_area()
A_ply = A_piece * num_pieces
R_DoC = A_ply / self.data_handle.cg.cone_area
Aeff = model.effective_area()[0]
R_Aeff = Aeff / A_piece
R_cont = model.ratio_continuous_fibers()
R_total = R_DoC * R_Aeff * R_cont
R_SumAeff = R_DoC * R_Aeff
result = GUIHandle.Result(
angle=self.angle, start=self.start, width=self.width, var=self.var,
Phi1=Phi[0], Phi2=Phi[1], Phi3=Phi[2], Phi4=Phi[3],
num_pieces=num_pieces, R_DoC=R_DoC, R_Aeff=R_Aeff,
R_cont=R_cont, R_SumAeff=R_SumAeff, R_total=R_total)
self.plot_window = PlotWindow()
if self.type == 1:
self.printLP(model, self.plot_window.qmc.fig)
elif self.type == 2:
self.printAngleThickness(model, self.plot_window.qmc.fig, True)
elif self.type == 3:
self.printAngleThickness(model, self.plot_window.qmc.fig, False)
else:
assert False
self.plot_window.show()
self.result_window = ResultTable(model, result)
def construct_single_ply_piece(self, fraction=1.0):
"""Construct a ply piece for shape A (trapezium)"""
th_nom = np.radians(self.fiber_angle)
# Step 1: Define origin line L0
origin_point = Point2D(self.starting_position, 0.0)
L0 = Line2D.from_point_angle(origin_point, th_nom )
# Step 2: Define line L2, perpendicular to L0, tangent to circle s4
tangent_point = Point2D.from_polar(self.cg.s4, th_nom)
L2 = Line2D.from_point_angle(tangent_point, th_nom + np.pi/2)
P0 = L0.intersection_line(L2)
# Step 3: Position P2 and P3 based on max_width and eccentricity
P2_dist = self.max_width * self.eccentricity
P3_dist = self.max_width * (1 - self.eccentricity)
P2 = P0 + Point2D.from_polar(P2_dist, L2.angle())
P3 = P0 + Point2D.from_polar(P3_dist, L2.angle() + np.pi)
# Step 4: Calculate a rough estimate of the spanned angle
delta_phi_1 = (P2.angle() - P0.angle())
delta_phi_2 = (P0.angle() - P3.angle())
ip_L0_s2 = L0.intersection_circle_near(self.cg.s2, origin_point)
ip_L0_s4 = L0.intersection_circle_near(self.cg.s4, origin_point)
ratio = 0.0
REQ_RATIO = 2.0
# Step 5: Iterate until the ratio of spanned angles on s4 and s2 is (nearly) correct
while abs(ratio - REQ_RATIO) > TOL:
delta_phi_on_s2 = REQ_RATIO * (delta_phi_1 + delta_phi_2)
ip_L1_s2 = ip_L0_s2.rotate(REQ_RATIO * delta_phi_1)
ip_L3_s2 = ip_L0_s2.rotate(-REQ_RATIO * delta_phi_2)
L1 = Line2D.from_points(ip_L1_s2, P2)
L3 = Line2D.from_points(ip_L3_s2, P3)
ip_L1_s4 = L1.intersection_circle_near(self.cg.s4, P0)
ip_L3_s4 = L3.intersection_circle_near(self.cg.s4, P0)
delta_phi_1 = ip_L1_s4.angle() - ip_L0_s4.angle()
delta_phi_2 = ip_L0_s4.angle() - ip_L3_s4.angle()
delta_phi_on_s4 = delta_phi_1 + delta_phi_2
ratio = delta_phi_on_s2 / delta_phi_on_s4
# Redefine P2 and P3 if needed (for rest pieces)
if fraction != 1.0:
ip_L1_s2 = ip_L1_s2.rotate((fraction - 1.0) * delta_phi_1)
ip_L3_s2 = ip_L3_s2.rotate((1.0 - fraction) * delta_phi_2)
# Apply an additional rotation to avoid having more than one overlap
ip_L3_s2 = ip_L3_s2.rotate(delta_phi_1 + delta_phi_2)
ip_L1_s4 = ip_L1_s4.rotate((fraction - 1.0) * delta_phi_1)
ip_L3_s4 = ip_L3_s4.rotate((1.0 - fraction) * delta_phi_2)
L1 = Line2D.from_points(ip_L1_s2, ip_L1_s4)
L3 = Line2D.from_points(ip_L3_s2, ip_L3_s4)
delta_phi_1 *= fraction
delta_phi_2 *= fraction
# Step 6: redefine P1 to P4 as the intersection points
L4 = Line2D.from_point_angle(Point2D(0.0, 0.0), L2.angle())
P1 = L1.intersection_line(L4)
P2 = L2.intersection_line(L1)
P3 = L3.intersection_line(L2)
P4 = L4.intersection_line(L3)
# Step 7: Return the final ply piece
return PlyPiece(Polygon2D((P1, P2, P3, P4)), 0.0, -delta_phi_2, delta_phi_1)
def effective_area(self, ply_piece=None, max_angle_dev=2.0):
"""Get the effective area of a single ply piece. This is the area on
useful section of the cone, where the deviation of the fiber angle
is less than a given maximum.
Parameters
----------
ply_piece : :class:`PlyPiece`, optional
Ply piece to get the effective area for. If not set, the base
piece is used.
max_angle_dev : float, optional
Maximum deviation from the nominal fiber angle to consider
the material 'effective'. In degrees.
Returns
-------
out : tuple
2-tuple, where ``out[0]`` is the effective surface area and
``out[1]`` is the corresponding polygon.
Notes
-----
Note that the polygon has straight edges, while the calculation of
the effective area takes into account that some edges of the effective
area may be arc sections.
"""
if ply_piece is None:
ply_piece = self.base_piece
poly, pts_on_s2, pts_on_s3 = self._useful_polygon(ply_piece)
# Construct lines through those corner points of the polygon,
# that are on s2/s3. They will be useful later
line_s2 = Line2D.from_points(*pts_on_s2)
line_s3 = Line2D.from_points(*pts_on_s3)
# Lines to cut away the non-effective area
cut_line_1 = Line2D.from_point_angle(Point2D(0., 0.),
ply_piece.phi_nom - np.radians(max_angle_dev))
cut_line_2 = Line2D.from_point_angle(Point2D(0., 0.),
ply_piece.phi_nom + np.pi + np.radians(max_angle_dev))
# Slice the polygon, with some corrections
for cut_line in (cut_line_1, cut_line_2):
outp = []
for p in poly.slice_line(cut_line).points():
# Polygon intersection can result in points that are not
# exactly on circles s2/s3, while they should be. Correct that.
if cut_line.distance_point(p) < TOL:
if line_s2.distance_point(p) < TOL:
p = cut_line.intersection_circle_near(self.cg.s2, p)
elif line_s3.distance_point(p) < TOL:
p = cut_line.intersection_circle_near(self.cg.s3, p)
outp.append(p)
poly = Polygon2D(outp)
# Calculate area
area = poly.area()
# Correct polygon area for arc sections s2/s3, if needed
pts_on_s2 = [p for p in poly.points() if abs(p.norm() - self.cg.s2) < TOL]
if len(pts_on_s2) >= 2:
angles = [p.angle() for p in pts_on_s2]
area -= circle_segment_area(self.cg.s2, max(angles) - min(angles))
pts_on_s3 = [p for p in poly.points() if abs(p.norm() - self.cg.s3) < TOL]
if len(pts_on_s3) >= 2:
angles = [p.angle() for p in pts_on_s3]
area += circle_segment_area(self.cg.s3, max(angles) - min(angles))
return area, poly
def construct_single_ply_piece(self, fraction=1.0):
"""Construct a ply piece for shape A (trapezium)"""
th_nom = np.radians(self.fiber_angle)
# Step 1: Define origin line L0
origin_point = Point2D(self.starting_position, 0.0)
L0 = Line2D.from_point_angle(origin_point, th_nom)
# Step 2: Define line L2, perpendicular to L0, tangent to circle s4
tangent_point = Point2D.from_polar(self.cg.s4, th_nom)
L2 = Line2D.from_point_angle(tangent_point, th_nom + np.pi / 2)
P0 = L0.intersection_line(L2)
# Step 3: Position P2 and P3 based on max_width and eccentricity
P2_dist = self.max_width * self.eccentricity
P3_dist = self.max_width * (1 - self.eccentricity)
P2 = P0 + Point2D.from_polar(P2_dist, L2.angle())
P3 = P0 + Point2D.from_polar(P3_dist, L2.angle() + np.pi)
# Step 4: Calculate a rough estimate of the spanned angle
delta_phi_1 = (P2.angle() - P0.angle())
delta_phi_2 = (P0.angle() - P3.angle())
ip_L0_s2 = L0.intersection_circle_near(self.cg.s2, origin_point)
ip_L0_s4 = L0.intersection_circle_near(self.cg.s4, origin_point)
ratio = 0.0
REQ_RATIO = 2.0
# Step 5: Iterate until the ratio of spanned angles on s4 and s2 is (nearly) correct
while abs(ratio - REQ_RATIO) > TOL:
delta_phi_on_s2 = REQ_RATIO * (delta_phi_1 + delta_phi_2)
ip_L1_s2 = ip_L0_s2.rotate(REQ_RATIO * delta_phi_1)
ip_L3_s2 = ip_L0_s2.rotate(-REQ_RATIO * delta_phi_2)
L1 = Line2D.from_points(ip_L1_s2, P2)
L3 = Line2D.from_points(ip_L3_s2, P3)
ip_L1_s4 = L1.intersection_circle_near(self.cg.s4, P0)
ip_L3_s4 = L3.intersection_circle_near(self.cg.s4, P0)
delta_phi_1 = ip_L1_s4.angle() - ip_L0_s4.angle()
delta_phi_2 = ip_L0_s4.angle() - ip_L3_s4.angle()
delta_phi_on_s4 = delta_phi_1 + delta_phi_2
ratio = delta_phi_on_s2 / delta_phi_on_s4
# Redefine P2 and P3 if needed (for rest pieces)
if fraction != 1.0:
ip_L1_s2 = ip_L1_s2.rotate((fraction - 1.0) * delta_phi_1)
ip_L3_s2 = ip_L3_s2.rotate((1.0 - fraction) * delta_phi_2)
# Apply an additional rotation to avoid having more than one overlap
ip_L3_s2 = ip_L3_s2.rotate(delta_phi_1 + delta_phi_2)
ip_L1_s4 = ip_L1_s4.rotate((fraction - 1.0) * delta_phi_1)
ip_L3_s4 = ip_L3_s4.rotate((1.0 - fraction) * delta_phi_2)
L1 = Line2D.from_points(ip_L1_s2, ip_L1_s4)
L3 = Line2D.from_points(ip_L3_s2, ip_L3_s4)
delta_phi_1 *= fraction
delta_phi_2 *= fraction
# Step 6: redefine P1 to P4 as the intersection points
L4 = Line2D.from_point_angle(Point2D(0.0, 0.0), L2.angle())
P1 = L1.intersection_line(L4)
P2 = L2.intersection_line(L1)
P3 = L3.intersection_line(L2)
P4 = L4.intersection_line(L3)
# Step 7: Return the final ply piece
return PlyPiece(Polygon2D((P1, P2, P3, P4)), 0.0, -delta_phi_2,
delta_phi_1)
def effective_area(self, ply_piece=None, max_angle_dev=2.0):
"""Get the effective area of a single ply piece. This is the area on
useful section of the cone, where the deviation of the fiber angle
is less than a given maximum.
Parameters
----------
ply_piece : :class:`PlyPiece`, optional
Ply piece to get the effective area for. If not set, the base
piece is used.
max_angle_dev : float, optional
Maximum deviation from the nominal fiber angle to consider
the material 'effective'. In degrees.
Returns
-------
out : tuple
2-tuple, where ``out[0]`` is the effective surface area and
``out[1]`` is the corresponding polygon.
Notes
-----
Note that the polygon has straight edges, while the calculation of
the effective area takes into account that some edges of the effective
area may be arc sections.
"""
if ply_piece is None:
ply_piece = self.base_piece
poly, pts_on_s2, pts_on_s3 = self._useful_polygon(ply_piece)
# Construct lines through those corner points of the polygon,
# that are on s2/s3. They will be useful later
line_s2 = Line2D.from_points(*pts_on_s2)
line_s3 = Line2D.from_points(*pts_on_s3)
# Lines to cut away the non-effective area
cut_line_1 = Line2D.from_point_angle(
Point2D(0., 0.), ply_piece.phi_nom - np.radians(max_angle_dev))
cut_line_2 = Line2D.from_point_angle(
Point2D(0., 0.),
ply_piece.phi_nom + np.pi + np.radians(max_angle_dev))
# Slice the polygon, with some corrections
for cut_line in (cut_line_1, cut_line_2):
outp = []
for p in poly.slice_line(cut_line).points():
# Polygon intersection can result in points that are not
# exactly on circles s2/s3, while they should be. Correct that.
if cut_line.distance_point(p) < TOL:
if line_s2.distance_point(p) < TOL:
p = cut_line.intersection_circle_near(self.cg.s2, p)
elif line_s3.distance_point(p) < TOL:
p = cut_line.intersection_circle_near(self.cg.s3, p)
outp.append(p)
poly = Polygon2D(outp)
# Calculate area
area = poly.area()
# Correct polygon area for arc sections s2/s3, if needed
pts_on_s2 = [
p for p in poly.points() if abs(p.norm() - self.cg.s2) < TOL
]
if len(pts_on_s2) >= 2:
angles = [p.angle() for p in pts_on_s2]
area -= circle_segment_area(self.cg.s2, max(angles) - min(angles))
pts_on_s3 = [
p for p in poly.points() if abs(p.norm() - self.cg.s3) < TOL
]
if len(pts_on_s3) >= 2:
angles = [p.angle() for p in pts_on_s3]
area += circle_segment_area(self.cg.s3, max(angles) - min(angles))
return area, poly
