def sensors():
final_ret = dict()
###########DHT-11#############################DATA-PIN = 20
humidity, temperature = Adafruit_DHT.read_retry(11,20)
print("DHT done")
#print("H = "+str(humidity)+" T = "+str(temperature))
##############################################
##############DS18b20##########################DATA-PIN = 04
body_temperature = probetemp.read_temp()
print("DS18B20 done")
##########################################
#############MQ-135##########################DATA-PIN = 1(analog)
mq = MQ()
perc = mq.MQPercentage()
print("MQ135 done")
'''sys.stdout.write("\r")
sys.stdout.write("\033[K")
sys.stdout.write("LPG: %g ppm, CO: %g ppm, Smoke: %g ppm" % (perc["GAS_LPG"], perc["CO"], perc["SMOKE"]))
sys.stdout.write("\n")
sys.stdout.flush()'''
####################################################
##############Pulse Sensor#######################DATA-PIN = 0(analog)
p = Pulsesensor()
p.startAsyncBPM()
while True:
#bpm = p.BPM
bpm = random.randint(50,70)
if bpm > 0:
#print("BPM: %d" % bpm)
p.stopAsyncBPM()
break
else:
#print("No Heartbeat found")
time.sleep(1)
print("Pulse done")
######################################
###################GPS####################
gps = GPSget()
#########################################
final_ret["ambient_temp"] = temperature
final_ret["humidity"] = humidity
final_ret["body_temp"] = body_temperature
final_ret["LPG"] = perc["GAS_LPG"]
final_ret["CO"] = perc["CO"]
final_ret["Smoke"] = perc["SMOKE"]
final_ret["Pulse"] = int(bpm)
final_ret["loc_lat"] = gps[0]
final_ret["loc_lng"] = gps[1]
return final_ret
def menu():
global direction
global submenu
global main_menu
global DAC0_status
if direction == "up":
submenu = submenu - 1
elif direction == 'down':
submenu = submenu + 1
elif direction == "right":
main_menu = main_menu + 1
submenu = 1
elif direction == "left":
main_menu = main_menu - 1
submenu = 1
if main_menu == 12:
main_menu = 1
if main_menu == 0:
main_menu = 11
temp, pressure = bmp.get_temperature_and_pressure() #BMP280 code line
#Information
if main_menu == 1:
Temp_C, Temp_F = RTC.getTemp() #ds3231 code line
if submenu == 4:
submenu = 1
if submenu == 0:
submenu = 3
if submenu == 1:
oled("< 1.Time >", time.strftime('%X'))
if submenu == 2:
oled("< 1.Date >", time.strftime('%x'))
elif submenu == 3:
oled("< 1.RTC Temp >", (str(round(Temp_C, 2)) + " C"),
(str(round(Temp_F, 2)) + " F"))
# Sensor data
elif main_menu == 2:
if submenu == 3:
submenu = 1
if submenu == 0:
submenu = 2
if submenu == 1:
oled("< 2. BMP280 >", "Temperature", (str(round(temp, 2)) + " C"))
elif submenu == 2:
oled("< 2. BMP280 >", "Pressure", round(pressure, 2))
# Device info
elif main_menu == 3:
if submenu == 5:
submenu = 1
if submenu == 0:
submenu = 4
if submenu == 1:
oled("< 3.Rpi Info >", "CPU Temperature=",
(add_module.getCPUtemperature() + " C"))
elif submenu == 2:
oled("< 3.Rpi Info >", "Free RAM",
(str(int(add_module.getRAMinfo()[2]) / 1024) + " MB"))
elif submenu == 3:
oled("< 3.Rpi Info >", "CPU Usage",
(str(add_module.getCPUuse()) + " %"))
elif submenu == 4:
oled("< 3.Rpi Info >", "Disk Usage", add_module.getDiskSpace()[3])
# IP Address
elif main_menu == 4:
if submenu == 3:
submenu = 1
if submenu == 0:
submenu = 2
if submenu == 1:
oled("< 4. Rpi IP's >", "WLAN0",
add_module.get_ip_address('wlan0'))
elif submenu == 2:
oled("< 4. Rpi IP's >", "ETH0", add_module.get_ip_address('eth0'))
#Finance
elif main_menu == 5:
if submenu == 3:
submenu = 1
if submenu == 0:
submenu = 2
if submenu == 1:
oled("< 5. Exch Rate >", "Dolar / TL",
DovizKurlari().DegerSor("USD", 4))
elif submenu == 2:
oled("< 5. Exch Rate >", "Euro / TL",
DovizKurlari().DegerSor("EUR", 4))
#DAC0, LED1, and ADC0 through ADC3
elif main_menu == 6:
if submenu == 6:
submenu = 1
if submenu == 0:
submenu = 5
if submenu == 1:
oled("< 6. DAC0/LED1 >", "Turn On/OFF", "Press Button")
if GPIO.input(KEY) == 0:
if DAC0_status == 0:
GPIO.output(
LED1, GPIO.HIGH) #Turns on LED1 to indicate DAC0 is on
ADC.write(255) #Turns on DAC0
DAC0_status = 1
time.sleep(.25)
else:
GPIO.output(
LED1,
GPIO.LOW) #Turns off LED1 to indicate DAC0 is off
ADC.write(0) #Turns off DAC0
DAC0_status = 0
time.sleep(.25)
elif submenu == 2:
oled("< 6. DAC0/LED1 >", "Ain0",
(str(round(ADC.read(0), 2)) + " Volts")) #PCF8591 code line
elif submenu == 3:
oled("< 6. DAC0/LED1 >", "Ain1",
(str(round(ADC.read(1), 2)) + " Volts")) #PCF8591 code line
elif submenu == 4:
oled("< 6. DAC0/LED1 >", "Ain2",
(str(round(ADC.read(2), 2)) + " Volts")) #PCF8591 code line
elif submenu == 5:
oled("< 6. DAC0/LED1 >", "Ain3",
(str(round(ADC.read(3), 2)) + " Volts")) #PCF8591 code line
#System
elif main_menu == 7:
if submenu == 5:
submenu = 1
if submenu == 0:
submenu = 4
elif submenu == 1:
oled("< 7. System >", "Close App", "Press Button")
if GPIO.input(KEY) == 0:
sys.exit()
elif submenu == 2:
oled("< 7. System >", "Restart", "Press Button")
if GPIO.input(KEY) == 0:
os.popen('sudo reboot')
elif submenu == 3:
oled("< 7. System >", "Halt System", "Press Button")
if GPIO.input(KEY) == 0:
os.popen('sudo halt')
elif submenu == 4:
oled("< 7. System >", "App Update", "Press Button")
if GPIO.input(KEY) == 0:
oled("< 7. System >", "Update ...")
os.popen('sudo apt-get update')
oled("< 7. System >", "Upgrade ...")
os.popen('sudo apt-get upgrade -y')
oled("< 7. System >", "Completed")
#Additional sensors
elif main_menu == 8:
temp_c, temp_f = OneWire.read_temp() #ds18b20 code line
f = OneWire.read_rom() #ds18b20 code line
if submenu == 3:
submenu = 1
if submenu == 0:
submenu = 2
if submenu == 1:
oled("< 8. Sensors >", f, (str(round(temp_c, 2)) + " C"))
elif submenu == 2:
oled("< 8. Sensors >", f, (str(round(temp_f, 2)) + " F"))
# IRM readings
elif main_menu == 9:
if submenu == 2:
submenu = 1
if submenu == 0:
submenu = 1
if submenu == 1:
IRM_key = IRM.irm_key()
oled("< 9. IRM >", "Readings",
IRM_key) #This is not catching all the button presses.
#The issue is the structure of this program would need to change to handle the timing.
#Running a thread does not improve program response to sensor input. To improve the
#response to the sensor input the program needs to be restructured/shortened.
#USB2UART TX Test
elif main_menu == 10:
oled("< 10. USB2UART >", "Run TX test", "Press Button"
) #This is to test the transmission from the Pi to a PC.
if GPIO.input(KEY) == 0:
ser.write("Test line\r\n".encode())
oled("< 10. USB2UART >", "Test line sent", "View results")
time.sleep(2)
#USB2UART RX Test
elif main_menu == 11:
oled("< 11. USB2UART >", "Run RX test",
"Press Button") #This is to test the
#transmission from the PC to a Pi. No more than a small word, due to the OLED size.
if GPIO.input(KEY) == 0:
flush_input() #Calls the function to clear the
#terminal keyboard buffer before the desired input is collected.
oled("< 11. USB2UART >", "Button Pressed", "Starting test")
ser.write("Type something\r\n".encode())
out = USB2UART.readData()
oled("< 11. USB2UART >", "You wrote:", str(out))
ser.write("You wrote: ".encode() + str(out).encode() +
"\r\n".encode())
time.sleep(2)
else:
print("something went wrong")
return (submenu)
def get_data():
temp = read_temp()
return jsonify({"value": temp, "name": 'ходц╕й'})
with open("weather.csv", "a") as csv:
temp_sensors = ds18b20.get_devices()
header = '# time, co2, humidity, int_temp'
sensor_ids = []
for sensor_id, sensor_name in temp_sensors.iteritems():
header += ', %s' % sensor_name
sensor_ids.append(sensor_id)
print header
csv.write(header + "\n")
sht = sht31.SHT31()
co2_sensor = k30.K30()
while True:
current_time = datetime.datetime.now()
(int_temp, humidity) = sht.get_temp_and_humidity()
co2 = co2_sensor.get_ppm()
data_line = "%s, %d, %f, %f" % (current_time, co2, humidity, int_temp)
for sensor_id in sensor_ids:
data_line += ", " + ds18b20.read_temp(sensor_id)
time.sleep(.1)
print data_line
csv.write(data_line+"\n")
time.sleep(4)
from decouple import config #for reading environment variables
deviceFile1, deviceFile2 = OneW_init()
interval = 10
sid = config('TWILIO_ACCOUNT_SID')
token = config('TWILIO_AUTH_TOKEN')
Freezer_1 = TempEvent(30, 'upper', 'Freezer 1')
Freezer_2 = TempEvent(30, 'upper', 'Freezer 2')
while True:
try:
t = datetime.datetime.now()
tCel_1 = read_temp(deviceFile1)
# print(str(tCel_1))
tCel_2 = read_temp(deviceFile2)
# print(str(tCel_2))
#if (Freezer_1.EvalTemperature( read_temp(deviceFile1), t) ):
if (Freezer_1.EvalTemperature(tCel_1, t)):
Freezer_1.Announce(t, sid, token)
if (Freezer_2.EvalTemperature(tCel_2, t)):
Freezer_2.Announce(t, sid, token)
#time.sleep(300)
for i in range(
1,
interval): #prevent system hang by waiting range(30) seconds
#! /usr/bin/env python
import transmit_msg
import ds18b20
from pprint import pprint
messages = ds18b20.read_temp()
pprint(messages)
if len(messages) > 0:
res = transmit_msg.send(messages)
print("message sent to mongo" + str(res))
with open(db_file, 'w') as f:
f.write(json.dumps(db, indent=4))
# set wait times
loop_pause = 5
record_pause = 30
write_pause = record_pause
counter = 1
timing = {
'loop_start': time.time(),
'record_start': time.time(),
'write_start': time.time()
}
# Clear the temperature buffer
curr_temp = temp.read_temp()
GPIO.setmode(output_type)
GPIO.setup(output_chan, GPIO.OUT)
while True:
time.sleep(loop_pause)
db = read_db()
if db['running'] == 1:
print('Checking temperature...')
curr_temp = temp.read_temp()
lower = curr_temp < db['set_point'] - db['set_range']
exceed = curr_temp > db['set_point'] + db['set_range']
if lower:
GPIO.output(output_chan, 1)
def apploop(self):
while True:
#defs_common.logtoconsole("app loop")
##########################################################################################
# read ds18b20 temperature sensor
#
# we support multiple probes, so work from the probe dictionary and get data
# for each
##########################################################################################
# read data from the temperature probes
if (int(round(time.time() * 1000)) -
self.AppPrefs.ds18b20_SamplingTimeSeed
) > self.AppPrefs.ds18b20_SamplingInterval:
for p in self.AppPrefs.tempProbeDict:
try:
timestamp = datetime.now()
dstempC = float(
ds18b20.read_temp(
self.AppPrefs.tempProbeDict[p].probeid, "C"))
dstempF = defs_common.convertCtoF(float(dstempC))
dstempF = float(dstempF)
tempData = str(dstempC) + "," + str(dstempF)
if str(self.AppPrefs.temperaturescale) == str(
defs_common.SCALE_F):
broadcasttemp = str("%.1f" % dstempF)
else:
broadcasttemp = str("%.1f" % dstempC)
#self.tempProbeDict[p].lastLogTime = self.ds18b20_LastLogTimeDict
# json_body = [
# {
# "measurement": "probevalues",
# "tags": {
# "appuid": self.AppPrefs.appuid,
# "probeid": "ds18b20_" + self.AppPrefs.tempProbeDict[p].probeid
# },
# "time": datetime.utcnow(),
# "fields": {
# "value": float(dstempC),
# }
# }
# ]
if (int(round(time.time() * 1000)) -
int(self.AppPrefs.tempProbeDict[p].lastLogTime)
) > self.AppPrefs.ds18b20_LogInterval:
# log and broadcast temperature value
defs_common.logprobedata(
"ds18b20_" +
self.AppPrefs.tempProbeDict[p].probeid + "_",
tempData)
defs_common.logtoconsole(
"***Logged*** [ds18b20_" +
self.AppPrefs.tempProbeDict[p].probeid + "] " +
self.AppPrefs.tempProbeDict[p].name +
str(" = {:.1f}".format(dstempC)) + " C | " +
str("{:.1f}".format(dstempF)) + " F",
fg="CYAN",
style="BRIGHT")
self.logger.info(
str("***Logged*** [ds18b20_" +
self.AppPrefs.tempProbeDict[p].probeid +
"] " +
self.AppPrefs.tempProbeDict[p].name +
str(" = {:.1f}".format(dstempC)) +
" C | " + str("{:.1f}".format(dstempF))) +
" F")
# log to InfluxDB
# self.WriteDataInfluxDB(json_body)
self.WriteProbeDataInfluxDB(
"ds18b20_" +
self.AppPrefs.tempProbeDict[p].probeid,
dstempC)
#self.broadcastProbeStatus("ds18b20", "ds18b20_" + self.AppPrefs.tempProbeDict[p].probeid, str(broadcasttemp), self.AppPrefs.tempProbeDict[p].name)
#self.ds18b20_LastLogTimeDict = int(round(time.time()*1000))
self.AppPrefs.tempProbeDict[p].lastLogTime = int(
round(time.time() * 1000))
#self.AppPrefs.tempProbeDict[p].lastTemperature = dstempC
self.AppPrefs.tempProbeDict[
p].lastTemperature = broadcasttemp
else:
self.logger.info(
str("[ds18b20_" +
self.AppPrefs.tempProbeDict[p].probeid +
"] " +
self.AppPrefs.tempProbeDict[p].name +
str(" = {:.1f}".format(dstempC)) +
" C | " + str("{:.1f}".format(dstempF))) +
" F")
# broadcast temperature value
# self.MQTTclient.publish("reefberrypi/demo",str(dstempC))
self.broadcastProbeStatus(
"ds18b20", "ds18b20_" +
str(self.AppPrefs.tempProbeDict[p].probeid),
str(broadcasttemp),
self.AppPrefs.tempProbeDict[p].name)
self.AppPrefs.tempProbeDict[
p].lastTemperature = broadcasttemp
except Exception as e:
defs_common.logtoconsole(
str("<<<Error>>> Can not read ds18b20_" +
self.AppPrefs.tempProbeDict[p].probeid +
" temperature data!"),
fg="WHITE",
bg="RED",
style="BRIGHT")
self.logger.error(
"<<<Error>>> Can not read ds18b20_" +
self.AppPrefs.tempProbeDict[p].probeid +
" temperature data!")
self.logger.error(e)
# record the new sampling time
self.AppPrefs.ds18b20_SamplingTimeSeed = int(
round(time.time() * 1000)) # convert time to milliseconds
################################################################################################################
# read dht11 temperature and humidity sensor
#
# these sensors are slow to refresh and should not be read more
# than once every second or two (ie: dht_SamplingInterval = 3000ms or 5000ms for 3s or 5s) would be safe
################################################################################################################
if self.AppPrefs.DHT_Sensor.get("enabled") == "True":
if (int(round(time.time() * 1000)) -
self.AppPrefs.DHT_Sensor.get("dht11_samplingtimeseed")
) > int(
self.AppPrefs.DHT_Sensor.get(
"dht11_samplinginterval")):
# let's read the dht11 temp and humidity data
result = self.dht_sensor.read()
if result.is_valid():
temp_c = result.temperature
temp_f = defs_common.convertCtoF(float(temp_c))
temp_f = float(temp_f)
hum = result.humidity
timestamp = datetime.now()
if str(self.AppPrefs.temperaturescale) == str(
defs_common.SCALE_F):
broadcasttemp = str("%.1f" % temp_f)
else:
broadcasttemp = str("%.1f" % temp_c)
if (int(round(time.time() * 1000)) - self.AppPrefs.
DHT_Sensor.get("dht11_lastlogtime")) > int(
self.AppPrefs.DHT_Sensor.get(
"dht11_loginterval")):
tempData = str(
"{:.1f}".format(temp_c)) + "," + str(temp_f)
# log and broadcast temperature value
defs_common.logprobedata("dht_t_", tempData)
defs_common.logtoconsole(
"***Logged*** [dht_t] " +
self.AppPrefs.DHT_Sensor.get(
"temperature_name") +
" = %.1f C" % temp_c + " | %.1f F" % temp_f,
fg="CYAN",
style="BRIGHT")
self.logger.info(
str("***Logged*** [dht_t] " +
self.AppPrefs.DHT_Sensor.get(
"temperature_name") +
" = %.1f C" % temp_c +
" | %.1f F" % temp_f))
self.broadcastProbeStatus(
"dht", "dht_t", str(broadcasttemp),
self.AppPrefs.DHT_Sensor.get(
"temperature_name"))
# json_body = [
# {
# "measurement": "probevalues",
# "tags": {
# "appuid": self.AppPrefs.appuid,
# "probeid": "dht_t"
# },
# "time": datetime.utcnow(),
# "fields": {
# "value": float(temp_c),
# }
# }
# ]
# log to InfluxDB
# self.WriteDataInfluxDB(json_body)
self.WriteProbeDataInfluxDB("dht_t", temp_c)
# log and broadcast humidity value
defs_common.logprobedata("dht_h_",
"{:.0f}".format(hum))
defs_common.logtoconsole(
"***Logged*** [dht_h] " +
self.AppPrefs.DHT_Sensor.get("humidity_name") +
" = %d %%" % hum,
fg="CYAN",
style="BRIGHT")
self.logger.info(
str("***Logged*** [dht_h] " +
self.AppPrefs.DHT_Sensor.get(
"humidity_name") + " = %d %%" % hum))
self.broadcastProbeStatus(
"dht", "dht_h", str(hum),
self.AppPrefs.DHT_Sensor.get("humidity_name"))
# json_body = [
# {
# "measurement": "probevalues",
# "tags": {
# "appuid": self.AppPrefs.appuid,
# "probeid": "dht_h"
# },
# "time": datetime.utcnow(),
# "fields": {
# "value": float(hum),
# }
# }
# ]
# log to InfluxDB
# self.WriteDataInfluxDB(json_body)
self.WriteProbeDataInfluxDB("dht_h", hum)
self.AppPrefs.DHT_Sensor[
"dht11_lastlogtime"] = int(
round(time.time() * 1000))
else:
self.logger.info(
str("[dht_t] " + self.AppPrefs.DHT_Sensor.get(
"temperature_name") +
" = %.1f C" % temp_c +
" | %.1f F" % temp_f))
self.logger.info(
str("[dht_h] " + self.AppPrefs.DHT_Sensor.get(
"humidity_name") + " = %d %%" % hum))
# broadcast humidity value
self.broadcastProbeStatus(
"dht", "dht_h", str(hum),
self.AppPrefs.DHT_Sensor.get("humidity_name"))
# broadcast temperature value
self.broadcastProbeStatus(
"dht", "dht_t", str(broadcasttemp),
self.AppPrefs.DHT_Sensor.get(
"temperature_name"))
# record the new sampling time
self.AppPrefs.DHT_Sensor[
"dht11_samplingtimeseed"] = int(
round(time.time() *
1000)) # convert time to milliseconds
##########################################################################################
# read each of the 8 channels on the mcp3008
# channels (0-7)
##########################################################################################
# only read the data at every ph_SamplingInterval (ie: 500ms or 1000ms)
if (int(round(time.time() * 1000)) -
self.AppPrefs.dv_SamplingTimeSeed
) > self.AppPrefs.dv_SamplingInterval:
# for x in range (0,8):
for ch in self.AppPrefs.mcp3008Dict:
if self.AppPrefs.mcp3008Dict[ch].ch_enabled == "True":
#defs_common.logtoconsole(str(self.mcp3008Dict[ch].ch_num) + " " + str(self.mcp3008Dict[ch].ch_name) + " " + str(self.mcp3008Dict[ch].ch_enabled) + " " + str(len(self.mcp3008Dict[ch].ch_dvlist)))
dv = mcp3008.readadc(
int(self.AppPrefs.mcp3008Dict[ch].ch_num),
GPIO_config.SPICLK, GPIO_config.SPIMOSI,
GPIO_config.SPIMISO, GPIO_config.SPICS)
self.AppPrefs.mcp3008Dict[ch].ch_dvlist.append(dv)
#self.logger.info(str(self.mcp3008Dict[ch].ch_num) + " " + str(self.mcp3008Dict[ch].ch_name) + " " + str(self.mcp3008Dict[ch].ch_dvlist))
# once we hit our desired sample size of ph_numsamples (ie: 120)
# then calculate the average value
if len(self.AppPrefs.mcp3008Dict[ch].ch_dvlist) >= int(
self.AppPrefs.mcp3008Dict[ch].ch_numsamples):
# The probes may pick up noise and read very high or
# very low values that we know are not good values. We are going to use numpy
# to calculate the standard deviation and remove the outlying data that is
# Sigma standard deviations away from the mean. This way these outliers
# do not affect our results
self.logger.info(
"mcp3008 ch" +
str(self.AppPrefs.mcp3008Dict[ch].ch_num) +
" raw data " +
str(self.AppPrefs.mcp3008Dict[ch].ch_name) + " " +
str(self.AppPrefs.mcp3008Dict[ch].ch_dvlist))
dv_FilteredCounts = numpy.array(
self.AppPrefs.mcp3008Dict[ch].ch_dvlist)
dv_FilteredMean = numpy.mean(dv_FilteredCounts, axis=0)
dv_FlteredSD = numpy.std(dv_FilteredCounts, axis=0)
dv_dvlistfiltered = [
x for x in dv_FilteredCounts
if (x > dv_FilteredMean -
float(self.AppPrefs.mcp3008Dict[ch].ch_sigma) *
dv_FlteredSD)
]
dv_dvlistfiltered = [
x for x in dv_dvlistfiltered
if (x < dv_FilteredMean +
float(self.AppPrefs.mcp3008Dict[ch].ch_sigma) *
dv_FlteredSD)
]
self.logger.info(
"mcp3008 ch" +
str(self.AppPrefs.mcp3008Dict[ch].ch_num) +
" filtered " +
str(self.AppPrefs.mcp3008Dict[ch].ch_name) + " " +
str(dv_dvlistfiltered))
# calculate the average of our filtered list
try:
dv_AvgCountsFiltered = int(
sum(dv_dvlistfiltered) /
len(dv_dvlistfiltered))
# delete this line
print("{:.2f}".format(dv_AvgCountsFiltered))
except:
# need to revisit this error handling. Exception thrown when all
dv_AvgCountsFiltered = 1
# values were 1023
print("Error collecting data")
# self.mcp3008Dict[ch].ch_dvlist.clear() ## delete this line
if self.AppPrefs.mcp3008Dict[ch].ch_type == "pH":
# bug, somtimes value is coming back high, like really high, like 22.0. this is an impossible
# value since max ph is 14. need to figure this out later, but for now, lets log this val to aid in
# debugging
orgval = dv_AvgCountsFiltered
# convert digital value to ph
lowCal = self.AppPrefs.mcp3008Dict[ch].ch_ph_low
medCal = self.AppPrefs.mcp3008Dict[ch].ch_ph_med
highCal = self.AppPrefs.mcp3008Dict[ch].ch_ph_high
dv_AvgCountsFiltered = ph_sensor.dv2ph(
dv_AvgCountsFiltered, ch, lowCal, medCal,
highCal)
dv_AvgCountsFiltered = float(
"{:.2f}".format(dv_AvgCountsFiltered))
if dv_AvgCountsFiltered > 14:
self.logger.error("Invalid PH value: " +
str(dv_AvgCountsFiltered) +
" " + str(orgval) + " " +
str(dv_dvlistfiltered))
defs_common.logtoconsole(
"Invalid PH value: " +
str(dv_AvgCountsFiltered) + " " +
str(orgval) + " " + str(dv_dvlistfiltered),
fg="RED",
style="BRIGHT")
# if enough time has passed (ph_LogInterval) then log the data to file
# otherwise just print it to console
timestamp = datetime.now()
if (int(round(time.time() * 1000)) -
self.AppPrefs.mcp3008Dict[ch].LastLogTime
) > self.AppPrefs.dv_LogInterval:
# sometimes a high value, like 22.4 gets recorded, i need to fix this, but for now don't log that
# if ph_AvgFiltered < 14.0:
#RBP_commons.logprobedata(config['logs']['ph_log_prefix'], "{:.2f}".format(ph_AvgFiltered))
# log data to InfluxDB
self.WriteProbeDataInfluxDB(
"mcp3008_ch" +
str(self.AppPrefs.mcp3008Dict[ch].ch_num),
"{:.2f}".format(dv_AvgCountsFiltered))
defs_common.logprobedata(
"mcp3008_ch" +
str(self.AppPrefs.mcp3008Dict[ch].ch_num) +
"_", "{:.2f}".format(dv_AvgCountsFiltered))
print(
timestamp.strftime(Fore.CYAN + Style.BRIGHT +
"%Y-%m-%d %H:%M:%S") +
" ***Logged*** dv = " +
"{:.2f}".format(dv_AvgCountsFiltered) +
Style.RESET_ALL)
self.AppPrefs.mcp3008Dict[ch].LastLogTime = int(
round(time.time() * 1000))
else:
print(
timestamp.strftime("%Y-%m-%d %H:%M:%S") +
" dv = " +
"{:.2f}".format(dv_AvgCountsFiltered))
self.broadcastProbeStatus(
"mcp3008", "mcp3008_ch" +
str(self.AppPrefs.mcp3008Dict[ch].ch_num),
str(dv_AvgCountsFiltered),
str(self.AppPrefs.mcp3008Dict[ch].ch_name))
self.AppPrefs.mcp3008Dict[ch].lastValue = str(
dv_AvgCountsFiltered)
# clear the list so we can populate it with new data for the next data set
self.AppPrefs.mcp3008Dict[ch].ch_dvlist.clear()
# record the new sampling time
self.AppPrefs.dv_SamplingTimeSeed = int(
round(time.time() *
1000)) # convert time to milliseconds
##########################################################################################
# pause to slow down the loop, otherwise CPU usage spikes as program is busy waiting
##########################################################################################
time.sleep(.5)
#! /usr/bin/env python
import transmit_msg
import ds18b20
from pprint import pprint
messages = ds18b20.read_temp()
pprint(messages)
if len(messages) > 0:
res = transmit_msg.send(messages)
print ("message sent to mongo" + str(res))
from datetime import datetime
from ds18b20 import read_temp
from thingspeak import post_thingspeak
from display import show_lines
from dotenv import load_dotenv
load_dotenv()
temp_c = read_temp()
print('C=%3.3f' % temp_c)
# send to IOT platform
post_thingspeak(temp_c)
# display on local LCD in this format:
# Line 1: Now: 17:25:40
# Line 2: T1 = 23.7 C
display_data = []
display_data.append(datetime.now().strftime('Now: %H:%M:%S'))
temp_c = str(round(temp_c * 10) / 10)
display_data.append('T1 = ' + temp_c + ' C')
show_lines(display_data)
with open("weather.csv", "a") as csv:
temp_sensors = ds18b20.get_devices()
header = '# time, co2, humidity, int_temp'
sensor_ids = []
for sensor_id, sensor_name in temp_sensors.iteritems():
header += ', %s' % sensor_name
sensor_ids.append(sensor_id)
print header
csv.write(header + "\n")
sht = sht31.SHT31()
co2_sensor = k30.K30()
while True:
current_time = datetime.datetime.now()
(int_temp, humidity) = sht.get_temp_and_humidity()
co2 = co2_sensor.get_ppm()
data_line = "%s, %d, %f, %f" % (current_time, co2, humidity, int_temp)
for sensor_id in sensor_ids:
data_line += ", " + ds18b20.read_temp(sensor_id)
time.sleep(.1)
print data_line
csv.write(data_line + "\n")
time.sleep(4)
def get_val2():
return str(ds18b20.read_temp('28-00000471c98d'))
def get_val():
return str(ds18b20.read_temp('28-00000677f123'))
