def __init__(self,
designerFile,
name,
path,
ZA,
yi,
halflife=None,
bdflsFile=None):
"""In general, this routine should be used indirectly via endlZA.read( ) or endlZA.addFile( ) and not called directly,
unless you know what you are doing."""
if (bdflsFile == None): bdflsFile = bdfls.getDefaultBdfls()
self.bdflsFile = bdflsFile
self.designerFile = designerFile
self.name = name
self.path = path
self.ZA = ZA
self.yiTags = endlmisc.incidentParticleTags(yi)
self.yi = self.yiTags[0]
self.yo = int(name[2:4])
self.C = int(name[5:7])
self.I = int(name[8:11])
self.S = int(name[12:15])
self.mode = endlmisc.getmodestring_(self.I, "endlFile.__init__")
self.halflife = halflife # Added so uses can input for natural ZA because the halflife is not in the bdfls file.
self.levels = []
def setYi( self, yi ) :
"""Sets self's yi value and self's header yi value to yi. yi must be an integer
or a string convertible to an integer."""
iyi = endlmisc.incidentParticleTags( yi )[0]
if( ( iyi < 1 ) or ( iyi > 10 ) ) : raise Exception( "\nError in setYi: yi must be in the range [1, 10]" )
self.checkHeader( 1 )
self.yi = iyi
syi = "%3d" % iyi
self.h[0] = self.h[0][:6] + syi + self.h[0][9:]
def possibleReactions( projectile, target, energy_MeV, maxProducts = 4, bdflsFile = None ) :
"""This function returns a list of all reactions for the projectile with kinetic energy energy_MeV
hitting the stationary target that are allowed by the amount of energy_MeV available in the
center-of-mass and a reaction's Q. Reactions considered will only contain products of n_1,
H_1, H_2, H_3, He_3, He_4 and a residual. The reactions considered are also limited to the
number of outgoing products, not including the residual, being no greater than maxProducts."""
if( bdflsFile is None ) :
import bdfls
bdflsFile = bdfls.getDefaultBdfls( )
import endlmisc
projectile_ = endlmisc.incidentParticleTags( projectile )
projectiles = [ [ 1, 0 ], [ 1001, 0 ], [ 1002, 0 ], [ 1003, 0 ], [ 2003, 0 ], [ 2004, 0 ] ]
nProjectiles = len( projectiles )
if( not ( 0 < projectile_[0] <= nProjectiles ) and projectile != 7 ) : raise Exception( '%s is an unsupported projectile' % projectile )
projectileZA = yoToZA( projectile_[0] )
incidentZA = projectileZA + target
if projectile != 7:
for p in projectiles :
p[1] = bdflsFile.mass( p[0] )
if( p[0] == projectileZA ) : projectileMass = p[1]
else: projectileMass = 0.0
targetMass = bdflsFile.mass( target )
incidentMass = projectileMass + targetMass
kineticMass = energy_MeV / bdflsFile.constant( 4 )
if( kineticMass < 1e-6 * projectileMass ) : # Use non-relativity
incidentMass += targetMass * kineticMass / incidentMass
else : # Need relativity
incidentMass = math.sqrt( incidentMass * incidentMass + 2. * kineticMass * targetMass )
reactions = []
def possibleReactions2( currentZA, products, productMass, level ) :
if( level > maxProducts ) : return
for ZA, mass in projectiles :
residualZA = currentZA - ZA
if( residualZA < ZA ) : break
Z, A = ZandAFromZA( residualZA )
if( A < Z ) : continue
newProducts = products + [ ZA ]
newProductMass = productMass + mass
if( not( 1 < residualZA < 1001 ) ) :
residualMass = bdflsFile.mass( residualZA )
if( residualMass is not None ) :
if( incidentMass >= ( residualMass + newProductMass ) ) : reactions.append( newProducts + [ residualZA ] )
possibleReactions2( residualZA, newProducts, newProductMass, level + 1 )
possibleReactions2( incidentZA, [], 0., 1 )
return( reactions )
def reactionEquations( yi_, ZA_, C, level = None, specialCases = 1, printQWarning = True, NameASeperator = "", bdflsFile = None ) :
"""Given the incident particle yi, target ZA and reaction type C,
this routine returns a list of three string for the reaction's equation. The first string
is of the form 'yi + ZA -> products + residual + Q' and the second is of the form
ZA(yi,products)residual. The third string is of the form (yi,products). For example,
reactionEquations( 1, 94239, 13 ) returns the list
[ 'n + Pu239n -> 3n + Pu237 + -12.64503 MeV', 'Pu239(n,3n)Pu237', '(n,3n)' ].
If level is not None, """
import endlmisc
yi = endlmisc.incidentParticleTags( yi_ )[0]
ZA, Suffix = endlmisc.intZASuffix( ZA_ )
Z, A = ZandAFromZA( ZA )
s1 = endl_y.endl_yLabel( ZAToYo( yi ) ) + " + " + symbolForYoOrZA( ZA_, ZAOnly = 1, AddNatural = 0, NameASeperator = NameASeperator ) + " ->"
s2 = symbolForYoOrZA( ZA_, ZAOnly = 1, AddNatural = 0, NameASeperator = NameASeperator ) + "(" + endl_y.endl_yLabel( ZAToYo( yi ) ) + ","
ZAr, yos, q = residualZA_yos_Q( yi, ZA, C, specialCases = specialCases, printQWarning = printQWarning, bdflsFile = bdflsFile )
if ( ( len( yos ) > 0 ) and ( yos[0] < 0 ) ) :
if ( yos[0] == -1 ) : # yo is unknown
s1 += " ?"
s2 += "?)?"
elif ( yos[0] == -2 ) : # yo = yi
s1 += " %s + %s" % ( endl_y.endl_yLabel( ZAToYo( yi ) ), symbolForYoOrZA( ZA_, ZAOnly = 1, AddNatural = 0, NameASeperator = NameASeperator ) )
s2 += "%s)%s" % ( endl_y.endl_yLabel( ZAToYo( yi ) ), symbolForYoOrZA( ZA_, ZAOnly = 1, AddNatural = 0, NameASeperator = NameASeperator ) )
elif ( yos[0] == -3 ) : # fission
s1 += " fission + ?"
s2 += "fission)?"
elif ( yos[0] == -4 ) : # Xyo
s1 += " X%s + ?" % endl_y.endl_yLabel( ZAToYo( yos[1] ) )
s2 += "X%s)?" % endl_y.endl_yLabel( ZAToYo( yos[1] ) )
else :
raise Exception( "\nError in reactionName: invalid yos[0] = %s" % `yos[0]` )
else :
n = 1
yo_ = None
syo = ""
for yo in yos :
if ( yo_ is None ) :
yo_ = yo
elif ( yo != yo_ ) :
syo += " + "
if ( n > 1 ) :
syo += `n`
s2 += `n`
syo += symbolForYoOrZA( yo_, NameASeperator = NameASeperator )
s2 += symbolForYoOrZA( yo_, NameASeperator = NameASeperator ) + " "
n = 1
yo_ = yo
else :
n += 1
if ( yo_ is not None ) :
syo += " + "
if ( n > 1 ) :
syo += `n`
s2 += `n`
syo += endl_y.endl_yLabel( ZAToYo( yo_ ) )
s2 += endl_y.endl_yLabel( ZAToYo( yo_ ) ) + " "
if ( ( yi == 1 ) and ( C == 11 ) ) or ( ( yi == 2 ) and ( C == 40 ) ) or ( ( yi == 3 ) and ( C == 41 ) ) or \
( ( yi == 4 ) and ( C == 42 ) ) or ( ( yi == 5 ) and ( C == 44 ) ) or ( ( yi == 6 ) and ( C == 45 ) ) :
syo += "'"
s2 = s2[:-1] + "'"
syo = syo[2:] # remove first " +"
if ( q is None ) :
qStr = "?"
else :
qStr = "%.8g MeV" % q
if( ZA > 99000 ) and ( ZA <= 99200 ) or ( ZAr is None ) :
ZArStr = "?"
else :
ZArStr = symbolForYoOrZA( ZAr, ZAOnly = 1, AddNatural = 0, NameASeperator = NameASeperator )
if( level is not None ) : ZArStr += '[' + str( level ) + ']'
s1 += syo + " + " + ZArStr + " + " + qStr
if ( s2[-1] == " " ) : s2 = s2[:-1]
s2 += ")" + ZArStr
s3 = ""
if ( s2.find( "(" ) != -1 ) : s3 = "(" + s2.split( "(" )[1].split( ")" )[0] + ")"
return [ s1, s2, s3 ]
def residualZA_yos_Q( yi_, ZA_, C, targetELevel = 0., X4 = 0, specialCases = 1, printQWarning = True, bdflsFile = None ) :
"""Returns a tuple containing the residual ZA', yos and Q for reaction of type
C involving incident particle yi and target ZA. yos is a list. For example,
the reation, ZA + yi -> ZA' + yo_1 + yo_2 + ... + yo_n + Q,
would return ( ZA', [ yo_1, yo_2, ..., yo_n ], Q )."""
if( bdflsFile is None ) :
import bdfls
bdflsFile = bdfls.getDefaultBdfls( )
import endlmisc
ZA, Suffix = endlmisc.intZASuffix( ZA_ )
if( ( ( ZA % 1000 ) / 100 ) > 7 ) : ZA = ZA % 100 + 1000 * ( ZA / 1000 )
yi = endlmisc.incidentParticleTags( yi_ )[0]
if( ( ( yi == 3 ) and ( ZA == 1003 ) and ( C == 30 ) ) or # Added kludge to handle t(d,g n)He reaction.
( ( yi == 4 ) and ( ZA == 1002 ) and ( C == 30 ) ) ) :
yos = [ 7, 1 ]
else :
yos = endl_C.endl_C_yoInfo( C )
if ( yos is None ) or ( yos == () ) : return (None, ( ), None) # No such C-value or C-value does is not a reaction (e.g., C=1).
if ( yos[0] == -1 ) : return ( ZA, ( yi, ), None ) # yo unknown.
if ( yos[0] == -2 ) : return ( ZA, ( yi, ), 0. ) # yo = yi.
if ( yos[0] == -3 ) : return ( None, ( -3, ), None ) # Fission
if ( yos[0] == -4 ) : return ( None, ( -4, yos[1] ), None ) # Xyo
if ( ZA >= 99000 ) and ( ZA <= 99200 ) : return( None, yos, None )
Zr, Ar = ZandAFromZA( ZA )
Z_A = ZandAFromZA( yoToZA_forNuclei( ZAToYo( yi ) ) ) # yi's Z and A.
Zr += Z_A[0]
if( Ar != 0 ) : Ar += Z_A[1]
ZAr = ZA + yoToZA_forNuclei( ZAToYo( yi ) ) # Add yi's ZA to ZAr.
for yo in yos : # Subtract yos' Z, A and ZA from ZAr.
if( yo in [ 7, 8, 9 ] ) : continue
yo_ = yo
if ( yo < 1001 ) : yo_ = yoToZA_forNuclei( yo )
Z_A = ZandAFromZA( yo_ )
Zr -= Z_A[0]
if( Ar != 0 ) :
Ar -= Z_A[1]
ZAr -= yo_
if( Zr < 0 ) : # Check all ok.
raise Exception( "\nError in residualZA_yos_Q: bad C-value = %d for ZA = %d and yi = %d" % ( C, ZA, yi ) )
if( specialCases and ( ZAr == 4008 ) ) : # Special case for Be8 -> 2 He (e.g., n + Be9 -> 2 n + (Be8 -> 2 He)).
yos = yos + ( 2004, )
Zr, Ar, ZAr = 2, 4, 2004
if( Ar < 0 ) : Ar = 0
if( Ar == 0 ) : return( 1000 * Zr, yos, None )
Remove_yi = True
yos_ = []
for yo in yos : # To make math better, do not add and then subtract when yo = yi.
try :
yo_ = ZAToYo( yo )
except :
yo_ = yo
if( Remove_yi and ( yo_ == yi ) ) :
Remove_yi = False
else :
if ( yo != 0 ) : yos_.append( yo )
if ( ZAr == ZA ) :
ZAyos = 0
for yo in yos :
if( yo < 1000 ) :
ZAyos += yoToZA_forNuclei( yo )
else :
ZAyos += yo
q = bdflsFile.mass( yi )
for yo in yos : q -= bdflsFile.mass( yo )
if ( len( yos_ ) == 0 ) or ( ZAyos == yoToZA_forNuclei( yi ) ) :
q = ( bdflsFile.constant( 4 ) * q )
q += targetELevel - X4
return ( ZAr, yos, q )
endlmisc.printWarning( "Printing yo list")
for yo in yos_ : endlmisc.printWarning( `yo` )
endlmisc.printWarning( "\n" )
raise Exception( "Error in residualZA_yos_Q: ZAr == ZA, but yo list not empty" )
q = 0.
if( Remove_yi ) : q += bdflsFile.mass( yi )
for yo in yos_ : q -= bdflsFile.mass( yo )
ZAm = bdflsFile.mass( ZA )
if ( ZAm is None ) :
if( printQWarning ) : endlmisc.printWarning( "Warning in residualZA_yos_Q: target ZA = %d not in bdfls file (yi = %d, ZA = %d, C = %d)" % \
( ZA, yi, ZA, C ) )
q = None
else :
m = bdflsFile.mass( ZAr ) # Mass of residual.
if ( m is None ) :
if( printQWarning ) : endlmisc.printWarning( "Warning in residualZA_yos_Q: could not calculate Q as residual ZA = %d" % ZAr +
" not in bdfls file (yi = %d, ZA = %d, C = %d)" % ( yi, ZA, C ) )
q = None
else :
q += bdflsFile.mass( ZA ) - m
q *= bdflsFile.constant( 4 ) # Convert AMU to MeVs.
if q is not None : q += targetELevel - X4
return ( ZAr, yos, q )
def __init__(self,
database=None,
projectile=None,
yi=None,
workDir=None,
delWorkDirWhenDone=0,
readOnly=0,
release='current',
bdflsFile=None,
cleanWorkDirOfZAs=False):
"""Creates a new endlProject with database as the default database to use when reading ZAs. If bdflsFile is not None, then
it is the bdfls class instance associated with self."""
if (yi != None):
endlmisc.printWarning(
'Argument "yi" for Constructor of endlProject is deprecated, please use argument "projectile" instead.'
)
if (projectile != None):
raise Exception(
'Both "yi" and "projectile" argument specified, only use "projectile".'
)
projectile = yi
if (database == None): database = fudgeDefaults.ENDL_DEFAULT_DATABASE
if (bdflsFile == None):
bdflsFileName = None
if (os.path.exists('bdfls')):
bdflsFileName = './bdfls' # Else logic handled below.
else:
bdflsFileName = bdflsFile.Source
self.readOnly = readOnly or fudgeParameters.ReadOnly
self.delWorkDirWhenDone = delWorkDirWhenDone
dbInDatabaseName, yiInDatabaseName = os.path.split(database)
if (yiInDatabaseName in [
"yi01", "yi02", "yi03", "yi04", "yi05", "yi06", "yi07", "yi09"
]):
database = dbInDatabaseName
if ((projectile != None)
and (yiInDatabaseName !=
endlmisc.incidentParticleTags(projectile)[1])):
raise Exception(
"\nError in endlProject.__init__: yi in database name and yi differ"
)
projectile = endlmisc.incidentParticleTags(yiInDatabaseName)[5]
else:
if (projectile == None): projectile = 'n'
self.yiTags = endlmisc.incidentParticleTags(projectile)
self.name = self.yiTags[5]
(self.database,
Status) = endlmisc.getFullPath(os.path.join(database, 'ascii'),
fudgeDefaults.ENDL_DATABASE_DIR)
if (Status == 0):
(self.database,
Status) = endlmisc.getFullPath(database,
fudgeDefaults.ENDL_DATABASE_DIR)
if (Status == 0): ( self.database, Status ) = endlmisc.getFullPath( os.path.join( database, 'ascii' ), \
os.path.join( fudgeDefaults.TRANSLATED_DATABASE_DIR, release ) )
if (Status == 0): # File or directory does not exist
if (self.yiTags[0] not in [1, 2, 3, 4, 5, 6, 7, 9]):
raise Exception(
"\nError in endlProject.__init__: invalid projectile = %s"
% self.name)
self.database = None
self.yi = self.yiTags[0]
if (fudgeParameters.VerboseMode > 0): print self.yiTags[1]
elif (Status == 1):
raise Exception(
"\nError in endlProject.__init__: database is not a directory")
else:
self.database = os.path.join(self.database, self.yiTags[1])
if (not os.path.exists(self.database)):
self.database = None
else:
if (bdflsFileName == None):
bdflsFileName = os.path.join(
os.path.dirname(self.database).split('/ascii')[0],
'bdfls')
if (not os.path.exists(bdflsFileName)):
bdflsFileName = None
self.yi = self.yiTags[0]
self.bdflsFile = bdflsFile
if (bdflsFile == None):
self.bdflsFile = bdfls.getBdflsFile(
name=bdflsFileName
) # endlProject relies on bdfls class to search BDFLSPATH
self.bdflsFileName = endlmisc.getAbsPath_withDefaultDBCheck(
self.bdflsFile.Source)[
0] # and "/usr/gapps/data/nuclear/bdfls", in that order,
self.mass = 0 # for the bdfls file.
yoZA = endl2.yoToZA(self.yiTags[0])
if (self.yiTags[0] != 7): self.mass = self.bdflsFile.mass(abs(yoZA))
if (yoZA < 0): yoZA = 0
self.Z, self.A = endl2.ZandAFromZA(yoZA)
if (fudgeParameters.VerboseMode > 0):
print 'Using bdfls', self.bdflsFileName
print self.database
gappsDir = os.path.realpath('/usr/gapps/data/nuclear')
if self.readOnly:
self.workDir = None
else:
if (workDir == ''): workDir = self.database
if (workDir == None):
self.workDir = tempfile.mkdtemp()
else:
self.workDir = workDir
if (gappsDir == os.path.realpath(self.workDir)[:len(gappsDir)]):
if ('development' not in os.path.realpath(self.workDir)):
raise Exception(
'cannot make workDir point to /usr/gapps/data/nuclear, except in a development sub-directory'
)
if (not os.path.isdir(self.workDir)): os.makedirs(self.workDir)
self.workDir = endlmisc.appendyiDirIfNeeded(
self.workDir, self.yiTags[0])
if (not os.path.isdir(self.workDir)): os.makedirs(self.workDir)
if (not (self.workDir is None) and cleanWorkDirOfZAs):
os.system('rm -rf %s/za[0-9][0-9][0-9][0-9][0-9][0-9]*' %
self.workDir)
self.zas = []
self.documentation = None
if (self.database != None):
documentationFileName = os.path.join(self.database,
'documentation.txt')
if (os.path.exists(documentationFileName)):
self.documentation = fudgeDocumentationFile.fudgeDocumentationFile(
documentationFileName)
endlProjectList.append(self)
