def testNfs3Create_MtimeSet(t, env):
""" Create a file with mtime_set=2
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE4
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777,
mtime_set=2,
mtime_val=nfstime3(1234, 5678))
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.mtime.seconds == 1234 and \
res.attributes.mtime.nseconds == 5678, \
"CREATE - file %s (mtime=%s expected %s)" \
% (test_file, str(res.attributes.mtime), \
str(nfstime3(1234, 5678))))
def testNfs3Create_SizeSet(t, env):
""" Create a file with file_mode_set=1 and Size
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE3
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=9876543210)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 9876543210, \
"CREATE - file %s (size=%d expected %d)" % \
(test_file, res.attributes.size, 9876543210))
def testNfs3Create_SizeSet(t, env):
""" Create a file with file_mode_set=1 and Size
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE3
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777,
size_set=1,
size_val=9876543210)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 9876543210, \
"CREATE - file %s (size=%d expected %d)" % \
(test_file, res.attributes.size, 9876543210))
def testNfs3Create_FileModeSet(t, env):
""" Create a file with file_mode_set=1
Use this as a work around until bug #76982 is closed
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE2
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.mode == 0777,
"CREATE - file %s (mode=%d expected %d)" %
(test_file, res.attributes.mode, 0777))
def testNfs3Create_FileModeReset(t, env):
""" Create a file with one mode and then recreate it with another mode.
Expect the first mode to remain. (Unchecked is the default creation type.)
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE2R
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0321)
check(res, msg="CREATE(1) - file %s" % test_file)
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0654)
check(res, msg="CREATE(2) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.mode == 0321,
"CREATE - file %s (mode=%d expected %d)" %
(test_file, res.attributes.mode, 0321))
def testNfs3Create_UidAdminFail(t, env):
""" Create a file with uid_set=1 as second user
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE8
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c3.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777,
uid_set=1, uid_val=1234,
gid_set=1, gid_val=5678)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c3.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c3.getattr(test_file_fh)
checkvalid(res.attributes.uid == 10, \
"CREATE - file %s (uid=%d expected %d)" \
% (test_file, res.attributes.uid, 10))
checkvalid(res.attributes.gid == 10 or \
res.attributes.gid == 0, \
"CREATE - file %s (gid=%d expected %d)" \
% (test_file, res.attributes.gid, 10))
def testNfs3Create_UidAdminFail(t, env):
""" Create a file with uid_set=1 as second user
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE8
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c3.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777,
uid_set=1, uid_val=1234,
gid_set=1, gid_val=5678)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c3.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c3.getattr(test_file_fh)
checkvalid(res.attributes.uid == 10, \
"CREATE - file %s (uid=%d expected %d)" \
% (test_file, res.attributes.uid, 10))
checkvalid(res.attributes.gid == 10 or \
res.attributes.gid == 0, \
"CREATE - file %s (gid=%d expected %d)" \
% (test_file, res.attributes.gid, 10))
def testNfs3Create_AtimeSet(t, env):
""" Create a file with atime_set=2
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE5
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777,
mtime_set=2, mtime_val=nfstime3(1234, 5678),
atime_set=2, atime_val=nfstime3(1234, 5678))
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.atime.seconds == 1234 and \
res.attributes.atime.nseconds == 5678, \
"CREATE - file %s (atime=%s expected %s)" \
% (test_file, str(res.attributes.atime), \
str(nfstime3(1234, 5678))))
def testNfs3Create_Exclusive(t, env):
""" Create a file in exclusive mode
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE9
"""
### Setup Phase ###
#verf = '12345678'
verf = str(0x3B9ACA01)
wrongverf = '87654321'
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="CREATE - file %s" % test_file)
fh1 = res.resok.obj.handle.data
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
# Create with same verifier should return same object
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="2nd CREATE with correct verifier")
fh2 = res.resok.obj.handle.data
# Compare file handles
checkvalid(fh1 == fh2, "Filehandle changed on 2nd exclusive create"
"(fh1 = %s, fh2 = %s)" % (fh1, fh2))
# Create the file again, should return an error
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=wrongverf)
check(res, NFS3ERR_EXIST, msg="3rd CREATE with wrong verifier")
# Create with same verifier should return same object
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="3rd CREATE with correct verifier")
fh2 = res.resok.obj.handle.data
# Compare file handles
checkvalid(fh1 == fh2, "Filehandle changed on 3rd exclusive create"
"(fh1 = %s, fh2 = %s)" % (fh1, fh2))
def testNfs3Create_Exclusive(t, env):
""" Create a file in exclusive mode
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE9
"""
### Setup Phase ###
#verf = '12345678'
verf = str(0x3B9ACA01)
wrongverf = '87654321'
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="CREATE - file %s" % test_file)
fh1 = res.resok.obj.handle.data
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
# Create with same verifier should return same object
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="2nd CREATE with correct verifier")
fh2 = res.resok.obj.handle.data
# Compare file handles
checkvalid(fh1 == fh2, "Filehandle changed on 2nd exclusive create"
"(fh1 = %s, fh2 = %s)" % (fh1, fh2))
# Create the file again, should return an error
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=wrongverf)
check(res, NFS3ERR_EXIST, msg="3rd CREATE with wrong verifier")
# Create with same verifier should return same object
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="3rd CREATE with correct verifier")
fh2 = res.resok.obj.handle.data
# Compare file handles
checkvalid(fh1 == fh2, "Filehandle changed on 3rd exclusive create"
"(fh1 = %s, fh2 = %s)" % (fh1, fh2))
def testNfs3Create_SizeTruncate(t, env):
""" Create a file with a specified size and then truncate it with
another create. (Unchecked is the default creation type.)
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE3T
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=9876543210)
check(res, msg="CREATE(1) - file %s" % test_file)
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=1234567890)
check(res, msg="CREATE(2) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 9876543210,
"CREATE - file %s (size=%d expected %d)" %
(test_file, res.attributes.size, 9876543210))
### Execution Phase 2 ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=0)
check(res, msg="CREATE(3) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase 2 ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 0,
"CREATE - file %s (size=%d expected %d)" %
(test_file, res.attributes.size, 0))
def testNfs3Create_SizeTruncate(t, env):
""" Create a file with a specified size and then truncate it with
another create. (Unchecked is the default creation type.)
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE3T
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=9876543210)
check(res, msg="CREATE(1) - file %s" % test_file)
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=1234567890)
check(res, msg="CREATE(2) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 9876543210,
"CREATE - file %s (size=%d expected %d)" %
(test_file, res.attributes.size, 9876543210))
### Execution Phase 2 ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=0)
check(res, msg="CREATE(3) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase 2 ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 0,
"CREATE - file %s (size=%d expected %d)" %
(test_file, res.attributes.size, 0))
def set_acl_round_trip(file_obj,
client,
acl,
set_acl_exp=NFS4_OK,
get_acl_exp=NFS4_OK,
compare=True):
""" set_acl_round_trip(file_obj(list), client, acl, set_acl_exp=NFS4_OK,
get_acl_exp=NFS4_OK, compare=True):
Sets a specific ACL on a file (can be directory as well) and then
attempts to round trip it via SETATTR and GETATTR and then compares
the original and final ACL to validate they are equal.
"""
# if given an argument that is not a list, set it to be a list
if type(acl) != type(list()):
acl = [acl]
baseops = client.use_obj(file_obj)
acl_attr_bitnum = get_attrbitnum_dict()['acl']
# set passed in ace on file
setaclops = baseops + [client.setattr({acl_attr_bitnum: acl})]
set_res = client.compound(setaclops)
# check result
check(set_res, set_acl_exp, "SETATTR: Could not set ACE: %s" % (acl))
# get back set ace
getaclops = baseops + [client.getattr({acl_attr_bitnum: acl})]
get_res = client.compound(getaclops)
check(get_res, get_acl_exp, "GETATTR: Could not get ACE: %s" % (acl))
# pull the ace from the server out of the response
get_res_acl = get_res.resarray[-1].obj_attributes[acl_attr_bitnum]
# compare the source ace and result ace
if compare:
checkvalid(
compare_acl(acl, get_res_acl),
"SETATTR ACL: Source ACE (%s) and returned ACE (%s) do not match!"
% (acl, get_res_acl))
def set_acl_round_trip(file_obj, client, acl, set_acl_exp=NFS4_OK, get_acl_exp=NFS4_OK, compare=True):
""" set_acl_round_trip(file_obj(list), client, acl, set_acl_exp=NFS4_OK,
get_acl_exp=NFS4_OK, compare=True):
Sets a specific ACL on a file (can be directory as well) and then
attempts to round trip it via SETATTR and GETATTR and then compares
the original and final ACL to validate they are equal.
"""
# if given an argument that is not a list, set it to be a list
if type(acl) != type(list()):
acl = [acl]
baseops = client.use_obj(file_obj)
acl_attr_bitnum = get_attrbitnum_dict()["acl"]
# set passed in ace on file
setaclops = baseops + [client.setattr({acl_attr_bitnum: acl})]
set_res = client.compound(setaclops)
# check result
check(set_res, set_acl_exp, "SETATTR: Could not set ACE: %s" % (acl))
# get back set ace
getaclops = baseops + [client.getattr({acl_attr_bitnum: acl})]
get_res = client.compound(getaclops)
check(get_res, get_acl_exp, "GETATTR: Could not get ACE: %s" % (acl))
# pull the ace from the server out of the response
get_res_acl = get_res.resarray[-1].obj_attributes[acl_attr_bitnum]
# compare the source ace and result ace
if compare:
checkvalid(
compare_acl(acl, get_res_acl),
"SETATTR ACL: Source ACE (%s) and returned ACE (%s) do not match!" % (acl, get_res_acl),
)
