def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield climate.register_climate(var, config)
cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
time_ = yield cg.get_variable(config[CONF_TIME_ID])
cg.add(var.set_time(time_))
if CONF_TEMP in config:
sens = yield cg.get_variable(config[CONF_TEMP])
cg.add(var.set_temperature_sensor(sens))
if CONF_VALVE in config:
sens = yield sensor.new_sensor(config[CONF_VALVE])
cg.add(var.set_valve(sens))
if CONF_ECO in config:
sens = yield sensor.new_sensor(config[CONF_ECO])
cg.add(var.set_eco(sens))
if CONF_COMFORT in config:
sens = yield sensor.new_sensor(config[CONF_COMFORT])
cg.add(var.set_comfort(sens))
cg.add(var.set_offset(config[CONF_OFFSET]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
heading = yield cg.get_variable(config[CONF_DEP_HEADING])
frequency = yield cg.get_variable(config[CONF_DEP_FREQUENCY])
max_frequency = yield cg.get_variable(config[CONF_DEP_MAX_FREQUENCY])
cg.add(var.set_dependent_sensors(heading, frequency, max_frequency))
if CONF_HEADING in config:
sens = yield sensor.new_sensor(config[CONF_HEADING])
cg.add(var.set_heading_sensor(sens))
if CONF_HEADING_COMPASS in config:
# sens = yield text_sensor.new_sensor(config[CONF_HEADING_COMPASS])
# cg.add(var.set_heading_compass_sensor(sens))
sens = cg.new_Pvariable(config[CONF_HEADING_COMPASS][CONF_ID])
yield text_sensor.register_text_sensor(sens,
config[CONF_HEADING_COMPASS])
cg.add(var.set_heading_compass_sensor(sens))
if CONF_SPEED in config:
sens = yield sensor.new_sensor(config[CONF_SPEED])
cg.add(var.set_speed_sensor(sens))
if CONF_MAX_SPEED in config:
sens = yield sensor.new_sensor(config[CONF_MAX_SPEED])
cg.add(var.set_max_speed_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
sel = yield cg.gpio_pin_expression(config[CONF_SEL_PIN])
cg.add(var.set_sel_pin(sel))
cf = yield cg.gpio_pin_expression(config[CONF_CF_PIN])
cg.add(var.set_cf_pin(cf))
cf1 = yield cg.gpio_pin_expression(config[CONF_CF1_PIN])
cg.add(var.set_cf1_pin(cf1))
if CONF_VOLTAGE in config:
sens = yield sensor.new_sensor(config[CONF_VOLTAGE])
cg.add(var.set_voltage_sensor(sens))
if CONF_CURRENT in config:
sens = yield sensor.new_sensor(config[CONF_CURRENT])
cg.add(var.set_current_sensor(sens))
if CONF_POWER in config:
sens = yield sensor.new_sensor(config[CONF_POWER])
cg.add(var.set_power_sensor(sens))
if CONF_ENERGY in config:
sens = yield sensor.new_sensor(config[CONF_ENERGY])
cg.add(var.set_energy_sensor(sens))
cg.add(var.set_current_resistor(config[CONF_CURRENT_RESISTOR]))
cg.add(var.set_voltage_divider(config[CONF_VOLTAGE_DIVIDER]))
cg.add(var.set_change_mode_every(config[CONF_CHANGE_MODE_EVERY]))
cg.add(var.set_initial_mode(INITIAL_MODES[config[CONF_INITIAL_MODE]]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield spi.register_spi_device(var, config)
for i, phase in enumerate([CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C]):
if phase not in config:
continue
conf = config[phase]
cg.add(var.set_volt_gain(i, conf[CONF_GAIN_VOLTAGE]))
cg.add(var.set_ct_gain(i, conf[CONF_GAIN_CT]))
if CONF_VOLTAGE in conf:
sens = yield sensor.new_sensor(conf[CONF_VOLTAGE])
cg.add(var.set_voltage_sensor(i, sens))
if CONF_CURRENT in conf:
sens = yield sensor.new_sensor(conf[CONF_CURRENT])
cg.add(var.set_current_sensor(i, sens))
if CONF_POWER in conf:
sens = yield sensor.new_sensor(conf[CONF_POWER])
cg.add(var.set_power_sensor(i, sens))
if CONF_FREQUENCY in config:
sens = yield sensor.new_sensor(config[CONF_FREQUENCY])
cg.add(var.set_freq_sensor(sens))
cg.add(var.set_line_freq(config[CONF_LINE_FREQUENCY]))
cg.add(var.set_pga_gain(config[CONF_GAIN_PGA]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_PM_1_0 in config:
sens = yield sensor.new_sensor(config[CONF_PM_1_0])
cg.add(var.set_pm_1_0_sensor(sens))
if CONF_PM_2_5 in config:
sens = yield sensor.new_sensor(config[CONF_PM_2_5])
cg.add(var.set_pm_2_5_sensor(sens))
if CONF_PM_10_0 in config:
sens = yield sensor.new_sensor(config[CONF_PM_10_0])
cg.add(var.set_pm_10_0_sensor(sens))
if CONF_AQI in config:
sens = yield sensor.new_sensor(config[CONF_AQI])
cg.add(var.set_aqi_sensor(sens))
cg.add(
var.set_aqi_calculation_type(
config[CONF_AQI][CONF_CALCULATION_TYPE]))
# https://platformio.org/lib/show/6306/Grove%20-%20Laser%20PM2.5%20Sensor%20HM3301
cg.add_library('6306', '1.0.3')
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_ECO2 in config:
sens = yield sensor.new_sensor(config[CONF_ECO2])
cg.add(var.set_eco2_sensor(sens))
if CONF_TVOC in config:
sens = yield sensor.new_sensor(config[CONF_TVOC])
cg.add(var.set_tvoc_sensor(sens))
if CONF_BASELINE in config:
baseline_config = config[CONF_BASELINE]
cg.add(var.set_eco2_baseline(baseline_config[CONF_ECO2_BASELINE]))
cg.add(var.set_tvoc_baseline(baseline_config[CONF_TVOC_BASELINE]))
if CONF_COMPENSATION in config:
compensation_config = config[CONF_COMPENSATION]
sens = yield cg.get_variable(compensation_config[CONF_HUMIDITY_SOURCE])
cg.add(var.set_humidity_sensor(sens))
sens = yield cg.get_variable(
compensation_config[CONF_TEMPERATURE_SOURCE])
cg.add(var.set_temperature_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_automatic_self_calibration(config[CONF_AUTOMATIC_SELF_CALIBRATION]))
if CONF_ALTITUDE_COMPENSATION in config:
cg.add(var.set_altitude_compensation(config[CONF_ALTITUDE_COMPENSATION]))
if CONF_AMBIENT_PRESSURE_COMPENSATION in config:
cg.add(var.set_ambient_pressure_compensation(config[CONF_AMBIENT_PRESSURE_COMPENSATION]))
if CONF_TEMPERATURE_OFFSET in config:
cg.add(var.set_temperature_offset(config[CONF_TEMPERATURE_OFFSET]))
if CONF_CO2 in config:
sens = yield sensor.new_sensor(config[CONF_CO2])
cg.add(var.set_co2_sensor(sens))
if CONF_HUMIDITY in config:
sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
cg.add(var.set_humidity_sensor(sens))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield modbus.register_modbus_device(var, config)
if CONF_VOLTAGE in config:
conf = config[CONF_VOLTAGE]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_voltage_sensor(sens))
if CONF_CURRENT in config:
conf = config[CONF_CURRENT]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_current_sensor(sens))
if CONF_POWER in config:
conf = config[CONF_POWER]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_power_sensor(sens))
if CONF_FREQUENCY in config:
conf = config[CONF_FREQUENCY]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_frequency_sensor(sens))
if CONF_POWER_FACTOR in config:
conf = config[CONF_POWER_FACTOR]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_power_factor_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
if CONF_HUMIDITY in config:
sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
cg.add(var.set_humidity_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield ble_client.register_ble_node(var, config)
if CONF_BATTERY_LEVEL in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
cg.add(var.set_battery(sens))
if CONF_ILLUMINANCE in config:
sens = yield sensor.new_sensor(config[CONF_ILLUMINANCE])
cg.add(var.set_illuminance(sens))
def to_code(config):
hub = yield cg.get_variable(config[CONF_AS3935_ID])
if CONF_DISTANCE in config:
conf = config[CONF_DISTANCE]
distance_sensor = yield sensor.new_sensor(conf)
cg.add(hub.set_distance_sensor(distance_sensor))
if CONF_LIGHTNING_ENERGY in config:
conf = config[CONF_LIGHTNING_ENERGY]
lightning_energy_sensor = yield sensor.new_sensor(conf)
cg.add(hub.set_energy_sensor(lightning_energy_sensor))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield uart.register_uart_device(var, config)
if CONF_CO2 in config:
sens = yield sensor.new_sensor(config[CONF_CO2])
cg.add(var.set_co2_sensor(sens))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield esp32_ble_tracker.register_ble_device(var, config)
cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
if CONF_WEIGHT in config:
sens = yield sensor.new_sensor(config[CONF_WEIGHT])
cg.add(var.set_weight(sens))
if CONF_IMPEDANCE in config:
sens = yield sensor.new_sensor(config[CONF_IMPEDANCE])
cg.add(var.set_impedance(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield esp32_ble_tracker.register_ble_device(var, config)
cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
if CONF_MOISTURE in config:
sens = yield sensor.new_sensor(config[CONF_MOISTURE])
cg.add(var.set_moisture(sens))
if CONF_CONDUCTIVITY in config:
sens = yield sensor.new_sensor(config[CONF_CONDUCTIVITY])
cg.add(var.set_conductivity(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield esp32_ble_tracker.register_ble_device(var, config)
cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature(sens))
if CONF_HUMIDITY in config:
sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
cg.add(var.set_humidity(sens))
def to_code(config):
wavin = yield cg.get_variable(config[CONF_WAVINAHC9000_ID])
var = cg.new_Pvariable(config[CONF_ID], wavin)
yield cg.register_component(var, config)
yield climate.register_climate(var, config)
cg.add(var.set_channel(config[CONF_CHANNEL] - 1))
if CONF_BATTERY_LEVEL in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
cg.add(var.set_battery_level_sensor(sens))
if CONF_CURRENT_TEMP in config:
sens = yield sensor.new_sensor(config[CONF_CURRENT_TEMP])
cg.add(var.set_current_temp_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield esp32_ble_tracker.register_ble_device(var, config)
cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
cg.add(var.set_constant(config[CONF_CONSTANT]))
if CONF_AVG_RAW in config:
sens = yield sensor.new_sensor(config[CONF_AVG_RAW])
cg.add(var.set_avg_raw(sens))
if CONF_AVG_W in config:
sens = yield sensor.new_sensor(config[CONF_AVG_W])
cg.add(var.set_avg_w(sens))
if CONF_AVG_DM3 in config:
sens = yield sensor.new_sensor(config[CONF_AVG_DM3])
cg.add(var.set_avg_dm3(sens))
if CONF_TOTAL_RAW in config:
sens = yield sensor.new_sensor(config[CONF_TOTAL_RAW])
cg.add(var.set_total_raw(sens))
if CONF_TOTAL_KWH in config:
sens = yield sensor.new_sensor(config[CONF_TOTAL_KWH])
cg.add(var.set_total_kwh(sens))
if CONF_TOTAL_DM3 in config:
sens = yield sensor.new_sensor(config[CONF_TOTAL_DM3])
cg.add(var.set_total_dm3(sens))
if CONF_BATTERY_LEVEL in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
cg.add(var.set_battery_level(sens))
if CONF_LIGHT_LEVEL in config:
sens = yield sensor.new_sensor(config[CONF_LIGHT_LEVEL])
cg.add(var.set_light_level(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield esp32_ble_tracker.register_ble_device(var, config)
yield binary_sensor.register_binary_sensor(var, config)
cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
if CONF_TABLET in config:
sens = yield sensor.new_sensor(config[CONF_TABLET])
cg.add(var.set_tablet(sens))
if CONF_BATTERY_LEVEL in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
cg.add(var.set_battery_level(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_TEMPERATURE in config:
conf = config[CONF_TEMPERATURE]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_temperature(sens))
if CONF_PRESSURE in config:
conf = config[CONF_PRESSURE]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_pressure(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield uart.register_uart_device(var, config)
if CONF_CO2 in config:
sens = yield sensor.new_sensor(config[CONF_CO2])
cg.add(var.set_co2_sensor(sens))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
if CONF_AUTOMATIC_BASELINE_CALIBRATION in config:
cg.add(var.set_abc_enabled(config[CONF_AUTOMATIC_BASELINE_CALIBRATION]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
pin = yield gpio_pin_expression(config[CONF_PIN])
cg.add(var.set_pin(pin))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
if CONF_HUMIDITY in config:
sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
cg.add(var.set_humidity_sensor(sens))
cg.add(var.set_dht_model(config[CONF_MODEL]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
if CONF_WIND_SPEED in config:
conf = config[CONF_WIND_SPEED]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_wind_speed_sensor(sens))
if CONF_WIND_DIRECTION_DEGREES in config:
conf = config[CONF_WIND_DIRECTION_DEGREES]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_wind_direction_degrees_sensor(sens))
pin = yield cg.gpio_pin_expression(config[CONF_PIN])
cg.add(var.set_pin(pin))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_BATTERY_LEVEL in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
cg.add(var.set_cellRemPercent_sensor(sens))
if CONF_BATTERY_VOLTAGE in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_VOLTAGE])
cg.add(var.set_cellVoltage_sensor(sens))
if "cell_charge" in config:
sens = yield sensor.new_sensor(config["cell_charge"])
cg.add(var.set_cellCharge_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield uart.register_uart_device(var, config)
if CONF_UPDATE_INTERVAL in config:
cg.add(var.set_update_interval_min(config[CONF_UPDATE_INTERVAL]))
cg.add(var.set_rx_mode_only(config[CONF_RX_ONLY]))
if CONF_PM_2_5 in config:
sens = yield sensor.new_sensor(config[CONF_PM_2_5])
cg.add(var.set_pm_2_5_sensor(sens))
if CONF_PM_10_0 in config:
sens = yield sensor.new_sensor(config[CONF_PM_10_0])
cg.add(var.set_pm_10_0_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield esp32_ble_client.register_ble_device(var, config)
cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
cg.add(var.set_update_interval(config[CONF_UPDATE_INTERVAL]))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature(sens))
if CONF_HUMIDITY in config:
sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
cg.add(var.set_humidity(sens))
if CONF_BATTERY_LEVEL in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
cg.add(var.set_battery_level(sens))
def setup_conf(config, key, hub):
if key in config:
conf = config[key]
sens = yield sensor.new_sensor(conf)
cg.add(getattr(hub, f"set_{key}_sensor")(sens))
if CONF_SAMPLE_RATE in conf:
cg.add(
getattr(hub, f"set_{key}_sample_rate")(conf[CONF_SAMPLE_RATE]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield spi.register_spi_device(var, config)
yield sensor.register_sensor(var, config)
if CONF_REFERENCE_TEMPERATURE in config:
tc_ref = yield sensor.new_sensor(config[CONF_REFERENCE_TEMPERATURE])
cg.add(var.set_reference_sensor(tc_ref))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield uart.register_uart_device(var, config)
if CONF_VOLTAGE in config:
conf = config[CONF_VOLTAGE]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_voltage_sensor(sens))
if CONF_CURRENT in config:
conf = config[CONF_CURRENT]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_current_sensor(sens))
if CONF_POWER in config:
conf = config[CONF_POWER]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_power_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield uart.register_uart_device(var, config)
if CONF_CO2 in config:
sens = yield sensor.new_sensor(config[CONF_CO2])
cg.add(var.set_co2_sensor(sens))
if CONF_FORMALDEHYDE in config:
sens = yield sensor.new_sensor(config[CONF_FORMALDEHYDE])
cg.add(var.set_formaldehyde_sensor(sens))
if CONF_TVOC in config:
sens = yield sensor.new_sensor(config[CONF_TVOC])
cg.add(var.set_tvoc_sensor(sens))
if CONF_PM_2_5 in config:
sens = yield sensor.new_sensor(config[CONF_PM_2_5])
cg.add(var.set_pm_2_5_sensor(sens))
if CONF_PM_10_0 in config:
sens = yield sensor.new_sensor(config[CONF_PM_10_0])
cg.add(var.set_pm_10_0_sensor(sens))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
if CONF_HUMIDITY in config:
sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
cg.add(var.set_humidity_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield modbus.register_modbus_device(var, config)
if CONF_PH in config:
conf = config[CONF_PH]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_ph_sensor(sens))
if CONF_TEMPERATURE in config:
conf = config[CONF_TEMPERATURE]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_temperature_sensor(sens))
if CONF_DIS1 in config:
conf = config[CONF_DIS1]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_dis1_sensor(sens))
if CONF_DIS2 in config:
conf = config[CONF_DIS2]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_dis2_sensor(sens))
if CONF_REDOX in config:
conf = config[CONF_REDOX]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_redox_sensor(sens))
if CONF_EC in config:
conf = config[CONF_EC]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_ec_sensor(sens))
if CONF_OCI in config:
conf = config[CONF_OCI]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_oci_sensor(sens))
