def to_code(config):
rhs = App.make_uptime_sensor(config[CONF_NAME], config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
uptime = make.Puptime
sensor.setup_sensor(uptime, make.Pmqtt, config)
setup_component(uptime, config)
def to_code(config):
rhs = App.make_wifi_signal_sensor(config[CONF_NAME], config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
wifi = make.Pwifi
sensor.setup_sensor(wifi, make.Pmqtt, config)
setup_component(wifi, config)
def to_code(config):
rhs = App.make_fast_led_light(config[CONF_NAME])
make = variable(config[CONF_MAKE_ID], rhs)
fast_led = make.Pfast_led
rgb_order = None
if CONF_RGB_ORDER in config:
rgb_order = RawExpression(config[CONF_RGB_ORDER])
template_args = TemplateArguments(RawExpression(config[CONF_CHIPSET]),
config[CONF_DATA_PIN],
config[CONF_CLOCK_PIN], rgb_order)
add(fast_led.add_leds(template_args, config[CONF_NUM_LEDS]))
if CONF_MAX_REFRESH_RATE in config:
add(fast_led.set_max_refresh_rate(config[CONF_MAX_REFRESH_RATE]))
if CONF_POWER_SUPPLY in config:
for power_supply in get_variable(config[CONF_POWER_SUPPLY]):
yield
add(fast_led.set_power_supply(power_supply))
if CONF_COLOR_CORRECT in config:
r, g, b = config[CONF_COLOR_CORRECT]
add(fast_led.set_correction(r, g, b))
light.setup_light(make.Pstate, make.Pmqtt, config)
setup_component(fast_led, config)
def to_code(config):
pin = None
for pin in gpio_input_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_binary_sensor(config[CONF_NAME], pin)
gpio = variable(config[CONF_MAKE_ID], rhs)
binary_sensor.setup_binary_sensor(gpio.Pgpio, gpio.Pmqtt, config)
def to_code(config):
output = None
for output in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_monochromatic_light(config[CONF_NAME], output)
light_struct = variable(config[CONF_MAKE_ID], rhs)
light.setup_light(light_struct.Pstate, light_struct.Pmqtt, config)
def to_code(config):
rhs = App.make_template_switch(config[CONF_NAME])
make = variable(config[CONF_MAKE_ID], rhs)
if CONF_LAMBDA in config:
template_ = None
for template_ in process_lambda(config[CONF_LAMBDA], [],
return_type=optional.template(bool_)):
yield
add(make.Ptemplate_.set_state_lambda(template_))
if CONF_TURN_OFF_ACTION in config:
actions = None
for actions in automation.build_actions(config[CONF_TURN_OFF_ACTION],
NoArg):
yield
add(make.Ptemplate_.add_turn_off_actions(actions))
if CONF_TURN_ON_ACTION in config:
actions = None
for actions in automation.build_actions(config[CONF_TURN_ON_ACTION],
NoArg):
yield
add(make.Ptemplate_.add_turn_on_actions(actions))
if CONF_OPTIMISTIC in config:
add(make.Ptemplate_.set_optimistic(config[CONF_OPTIMISTIC]))
switch.setup_switch(make.Ptemplate_, make.Pmqtt, config)
def to_code(config):
output = None
for output in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_simple_switch(config[CONF_NAME], output)
gpio = variable(config[CONF_MAKE_ID], rhs)
switch.setup_switch(gpio.Pswitch_, gpio.Pmqtt, config)
def to_code(config):
pin = None
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_switch(config[CONF_NAME], pin)
gpio = variable(config[CONF_MAKE_ID], rhs)
switch.setup_switch(gpio.Pswitch_, gpio.Pmqtt, config)
def to_code(config):
red = get_variable(config[CONF_RED])
green = get_variable(config[CONF_GREEN])
blue = get_variable(config[CONF_BLUE])
rhs = App.make_rgb_light(config[CONF_NAME], red, green, blue)
light_struct = variable(light.MakeLight, config[CONF_MAKE_ID], rhs)
light.setup_light(light_struct.Pstate, light_struct.Pmqtt, config)
def to_code(config):
rhs = App.make_bme280_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_PRESSURE][CONF_NAME],
config[CONF_HUMIDITY][CONF_NAME],
config[CONF_ADDRESS],
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
bme280 = make.Pbme280
if CONF_OVERSAMPLING in config[CONF_TEMPERATURE]:
constant = OVERSAMPLING_OPTIONS[config[CONF_TEMPERATURE][CONF_OVERSAMPLING]]
add(bme280.set_temperature_oversampling(constant))
if CONF_OVERSAMPLING in config[CONF_PRESSURE]:
constant = OVERSAMPLING_OPTIONS[config[CONF_PRESSURE][CONF_OVERSAMPLING]]
add(bme280.set_pressure_oversampling(constant))
if CONF_OVERSAMPLING in config[CONF_HUMIDITY]:
constant = OVERSAMPLING_OPTIONS[config[CONF_HUMIDITY][CONF_OVERSAMPLING]]
add(bme280.set_humidity_oversampling(constant))
if CONF_IIR_FILTER in config:
constant = IIR_FILTER_OPTIONS[config[CONF_IIR_FILTER]]
add(bme280.set_iir_filter(constant))
sensor.setup_sensor(bme280.Pget_temperature_sensor(), make.Pmqtt_temperature,
config[CONF_TEMPERATURE])
sensor.setup_sensor(bme280.Pget_pressure_sensor(), make.Pmqtt_pressure,
config[CONF_PRESSURE])
sensor.setup_sensor(bme280.Pget_humidity_sensor(), make.Pmqtt_humidity,
config[CONF_HUMIDITY])
def to_code(config):
rhs = App.make_template_cover(config[CONF_NAME])
make = variable(config[CONF_MAKE_ID], rhs)
if CONF_LAMBDA in config:
template_ = None
for template_ in process_lambda(config[CONF_LAMBDA], [],
return_type=optional.template(
cover.CoverState)):
yield
add(make.Ptemplate_.set_state_lambda(template_))
if CONF_OPEN_ACTION in config:
actions = None
for actions in automation.build_actions(config[CONF_OPEN_ACTION],
NoArg):
yield
add(make.Ptemplate_.add_open_actions(actions))
if CONF_CLOSE_ACTION in config:
actions = None
for actions in automation.build_actions(config[CONF_CLOSE_ACTION],
NoArg):
yield
add(make.Ptemplate_.add_close_actions(actions))
if CONF_STOP_ACTION in config:
actions = None
for actions in automation.build_actions(config[CONF_STOP_ACTION],
NoArg):
yield
add(make.Ptemplate_.add_stop_actions(actions))
if CONF_OPTIMISTIC in config:
add(make.Ptemplate_.set_optimistic(config[CONF_OPTIMISTIC]))
cover.setup_cover(make.Ptemplate_, make.Pmqtt, config)
def to_code(config):
rhs = App.make_template_switch(config[CONF_NAME])
make = variable(config[CONF_MAKE_ID], rhs)
template = make.Ptemplate_
switch.setup_switch(template, make.Pmqtt, config)
if CONF_LAMBDA in config:
for template_ in process_lambda(config[CONF_LAMBDA], [],
return_type=optional.template(bool_)):
yield
add(template.set_state_lambda(template_))
if CONF_TURN_OFF_ACTION in config:
automation.build_automation(template.get_turn_off_trigger(), NoArg,
config[CONF_TURN_OFF_ACTION])
if CONF_TURN_ON_ACTION in config:
automation.build_automation(template.get_turn_on_trigger(), NoArg,
config[CONF_TURN_ON_ACTION])
if CONF_OPTIMISTIC in config:
add(template.set_optimistic(config[CONF_OPTIMISTIC]))
if CONF_RESTORE_STATE in config:
add(template.set_restore_state(config[CONF_RESTORE_STATE]))
setup_component(template, config)
def to_code(config):
for output_ in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_binary_light(config[CONF_NAME], output_)
light_struct = variable(config[CONF_MAKE_ID], rhs)
light.setup_light(light_struct.Pstate, light_struct.Pmqtt, config)
setup_component(light_struct.Pstate, config)
def to_code(config):
rhs = App.make_mqtt_subscribe_sensor(config[CONF_NAME], config[CONF_TOPIC])
make = variable(config[CONF_MAKE_ID], rhs)
if CONF_QOS in config:
add(make.Psensor.set_qos(config[CONF_QOS]))
sensor.setup_sensor(make.Psensor, make.Pmqtt, config)
def to_code(config):
pin = None
for pin in gpio_input_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_duty_cycle_sensor(config[CONF_NAME], pin,
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(make.Pduty, make.Pmqtt, config)
def to_code(config):
rhs = App.make_bh1750_sensor(config[CONF_NAME], config[CONF_ADDRESS],
config.get(CONF_UPDATE_INTERVAL))
make_bh1750 = variable(config[CONF_MAKE_ID], rhs)
bh1750 = make_bh1750.Pbh1750
if CONF_RESOLUTION in config:
add(bh1750.set_resolution(BH1750_RESOLUTIONS[config[CONF_RESOLUTION]]))
sensor.setup_sensor(bh1750, make_bh1750.Pmqtt, config)
def to_code(config):
pin_cs = gpio_output_pin_expression(config[CONF_PIN_CS])
pin_clock = gpio_output_pin_expression(config[CONF_PIN_CLOCK])
pin_miso = gpio_input_pin_expression(config[CONF_PIN_MISO])
rhs = App.make_max6675_sensor(config[CONF_NAME], pin_cs, pin_clock,
pin_miso, config.get(CONF_UPDATE_INTERVAL))
make = variable(MakeMAX6675Sensor, config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(make.Pmax6675, make.Pmqtt, config)
def to_code(config):
template_ = None
for template_ in process_lambda(config[CONF_LAMBDA], [],
return_type=optional.template(bool_)):
yield
rhs = App.make_template_binary_sensor(config[CONF_NAME], template_)
make = variable(config[CONF_MAKE_ID], rhs)
binary_sensor.setup_binary_sensor(make.Ptemplate_, make.Pmqtt, config)
def to_code(config):
rhs = App.make_gpio_binary_sensor(config[CONF_NAME],
exp_gpio_input_pin(config[CONF_PIN]))
gpio = variable('Application::MakeGPIOBinarySensor', config[CONF_ID], rhs)
if CONF_INVERTED in config:
add(gpio.Pgpio.set_inverted(config[CONF_INVERTED]))
binary_sensor.setup_binary_sensor(gpio.Pgpio, config)
binary_sensor.setup_mqtt_binary_sensor(gpio.Pmqtt, config)
def to_code(config):
rhs = App.make_adc_sensor(config[CONF_NAME], config[CONF_PIN],
config.get(CONF_UPDATE_INTERVAL))
make = variable(MakeADCSensor, config[CONF_MAKE_ID], rhs)
adc = make.Padc
if CONF_ATTENUATION in config:
add(adc.set_attenuation(ATTENUATION_MODES[config[CONF_ATTENUATION]]))
sensor.setup_sensor(make.Padc, make.Pmqtt, config)
def to_code(config):
template_ = None
for template_ in process_lambda(config[CONF_LAMBDA], [],
return_type=optional.template(float_)):
yield
rhs = App.make_template_sensor(config[CONF_NAME], template_,
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(make.Ptemplate_, make.Pmqtt, config)
def to_code(config):
output = get_variable(config[CONF_OUTPUT])
rhs = App.make_fan(config[CONF_NAME])
fan_struct = variable('Application::MakeFan', config[CONF_ID], rhs)
add(fan_struct.Poutput.set_binary(output))
if CONF_OSCILLATION_OUTPUT in config:
oscillation_output = get_variable(config[CONF_OSCILLATION_OUTPUT])
add(fan_struct.Poutput.set_oscillation(oscillation_output))
fan.setup_mqtt_fan(fan_struct.Pmqtt, config)
def to_code(config):
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_switch(config[CONF_NAME], pin)
make = variable(config[CONF_MAKE_ID], rhs)
gpio = make.Pswitch_
switch.setup_switch(gpio, make.Pmqtt, config)
setup_component(gpio, config)
def to_code(config):
rhs = App.make_htu21d_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_HUMIDITY][CONF_NAME],
config.get(CONF_UPDATE_INTERVAL))
htu21d = variable(config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(htu21d.Phtu21d.Pget_temperature_sensor(), htu21d.Pmqtt_temperature,
config[CONF_TEMPERATURE])
sensor.setup_sensor(htu21d.Phtu21d.Pget_humidity_sensor(), htu21d.Pmqtt_humidity,
config[CONF_HUMIDITY])
def to_code(config):
for output_ in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_output_switch(config[CONF_NAME], output_)
make = variable(config[CONF_MAKE_ID], rhs)
switch_ = make.Pswitch_
switch.setup_switch(switch_, make.Pmqtt, config)
setup_component(switch, config)
def to_code(config):
rhs = App.make_hdc1080_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_HUMIDITY][CONF_NAME],
config.get(CONF_UPDATE_INTERVAL))
hdc1080 = variable(MakeHDC1080Sensor, config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(hdc1080.Phdc1080.Pget_temperature_sensor(),
hdc1080.Pmqtt_temperature, config[CONF_TEMPERATURE])
sensor.setup_sensor(hdc1080.Phdc1080.Pget_humidity_sensor(),
hdc1080.Pmqtt_humidity, config[CONF_HUMIDITY])
def to_code(config):
red = get_variable(config[CONF_RED])
green = get_variable(config[CONF_GREEN])
blue = get_variable(config[CONF_BLUE])
rhs = App.make_rgb_light(config[CONF_NAME], red, green, blue)
light_struct = variable('Application::MakeLight', config[CONF_ID], rhs)
if CONF_GAMMA_CORRECT in config:
add(light_struct.Poutput.set_gamma_correct(config[CONF_GAMMA_CORRECT]))
setup_mqtt_component(light_struct.Pmqtt, config)
light.setup_light_component(light_struct.Pstate, config)
def to_code(config):
rhs = App.make_adc_sensor(config[CONF_NAME], config[CONF_PIN],
config.get(CONF_UPDATE_INTERVAL))
make = variable('Application::MakeADCSensor', config[CONF_ID], rhs)
adc = make.Padc
if CONF_ATTENUATION in config:
attenuation = ATTENUATION_MODES[config[CONF_ATTENUATION]]
add(adc.set_attenuation(RawExpression(attenuation)))
sensor.setup_sensor(adc, config)
sensor.setup_mqtt_sensor_component(make.Pmqtt, config)
def to_code(config):
rhs = App.make_dht12_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_HUMIDITY][CONF_NAME],
config.get(CONF_UPDATE_INTERVAL))
dht = variable(MakeDHT12Sensor, config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(dht.Pdht.Pget_temperature_sensor(), dht.Pmqtt_temperature,
config[CONF_TEMPERATURE])
sensor.setup_sensor(dht.Pdht.Pget_humidity_sensor(), dht.Pmqtt_humidity,
config[CONF_HUMIDITY])
def to_code(config):
for uart_ in get_variable(config[CONF_UART_ID]):
yield
data = config[CONF_DATA]
if isinstance(data, str):
data = [HexInt(ord(x)) for x in data]
rhs = App.make_uart_switch(uart_, config[CONF_NAME],
ArrayInitializer(*data, multiline=False))
restart = variable(config[CONF_MAKE_ID], rhs)
switch.setup_switch(restart.Puart, restart.Pmqtt, config)