def _set_schema(self, schema):
"""Sets this workflow's properties from a `WorkflowSchema`.
Parameters
----------
schema: WorkflowSchema
The schema which outlines this steps in this workflow.
"""
# Copy the schema.
schema = WorkflowSchema.parse_json(schema.json())
if schema.final_value_source != UNDEFINED:
self._final_value_source = schema.final_value_source
self._final_value_source.append_uuid(self.uuid)
self._build_protocols(schema)
self._gradients_sources = []
if schema.gradients_sources != UNDEFINED:
for gradient_source in schema.gradients_sources:
gradient_source.append_uuid(self.uuid)
self._gradients_sources.append(gradient_source)
self._outputs_to_store = {}
if schema.outputs_to_store != UNDEFINED:
for label in schema.outputs_to_store:
self._append_uuid_to_output_to_store(
schema.outputs_to_store[label])
self._outputs_to_store[label] = self._build_output_to_store(
schema.outputs_to_store[label])
def _get_schema(self):
"""Returns the schema that describes this workflow.
Returns
-------
WorkflowSchema
The schema that describes this workflow.
"""
schema = WorkflowSchema()
schema.id = self.uuid
schema.protocol_schemas = [
copy.deepcopy(x.schema) for x in self._protocols
]
if self._final_value_source != UNDEFINED:
schema.final_value_source = self._final_value_source.copy()
schema.gradients_sources = [
source.copy() for source in self._gradients_sources
]
schema.outputs_to_store = copy.deepcopy(self._outputs_to_store)
return schema
def default_simulation_schema(existing_schema=None):
"""Returns the default calculation schema to use when estimating
this class of property from direct simulations.
Parameters
----------
existing_schema: SimulationSchema, optional
An existing schema whose settings to use. If set,
the schema's `workflow_schema` will be overwritten
by this method.
Returns
-------
SimulationSchema
The schema to follow when estimating this property.
"""
calculation_schema = SimulationSchema()
if existing_schema is not None:
assert isinstance(existing_schema, SimulationSchema)
calculation_schema = copy.deepcopy(existing_schema)
schema = WorkflowSchema(
property_type=HostGuestBindingAffinity.__name__)
schema.id = "{}{}".format(HostGuestBindingAffinity.__name__, "Schema")
# Initial coordinate and topology setup.
filter_ligand = miscellaneous.FilterSubstanceByRole("filter_ligand")
filter_ligand.input_substance = ProtocolPath("substance", "global")
filter_ligand.component_roles = [Component.Role.Ligand]
# We only support substances with a single guest ligand.
filter_ligand.expected_components = 1
schema.protocols[filter_ligand.id] = filter_ligand.schema
# Construct the protocols which will (for now) take as input a set of host coordinates,
# and generate a set of charges for them.
filter_receptor = miscellaneous.FilterSubstanceByRole(
"filter_receptor")
filter_receptor.input_substance = ProtocolPath("substance", "global")
filter_receptor.component_roles = [Component.Role.Receptor]
# We only support substances with a single host receptor.
filter_receptor.expected_components = 1
schema.protocols[filter_receptor.id] = filter_receptor.schema
# Perform docking to position the guest within the host.
perform_docking = coordinates.BuildDockedCoordinates("perform_docking")
perform_docking.ligand_substance = ProtocolPath(
"filtered_substance", filter_ligand.id)
perform_docking.receptor_coordinate_file = ProtocolPath(
"receptor_mol2", "global")
schema.protocols[perform_docking.id] = perform_docking.schema
# Solvate the docked structure using packmol
filter_solvent = miscellaneous.FilterSubstanceByRole("filter_solvent")
filter_solvent.input_substance = ProtocolPath("substance", "global")
filter_solvent.component_roles = [Component.Role.Solvent]
schema.protocols[filter_solvent.id] = filter_solvent.schema
solvate_complex = coordinates.SolvateExistingStructure(
"solvate_complex")
solvate_complex.max_molecules = 1000
solvate_complex.substance = ProtocolPath("filtered_substance",
filter_solvent.id)
solvate_complex.solute_coordinate_file = ProtocolPath(
"docked_complex_coordinate_path", perform_docking.id)
schema.protocols[solvate_complex.id] = solvate_complex.schema
# Assign force field parameters to the solvated complex system.
build_solvated_complex_system = forcefield.BaseBuildSystem(
"build_solvated_complex_system")
build_solvated_complex_system.force_field_path = ProtocolPath(
"force_field_path", "global")
build_solvated_complex_system.coordinate_file_path = ProtocolPath(
"coordinate_file_path", solvate_complex.id)
build_solvated_complex_system.substance = ProtocolPath(
"substance", "global")
build_solvated_complex_system.charged_molecule_paths = [
ProtocolPath("receptor_mol2", "global")
]
schema.protocols[build_solvated_complex_system.
id] = build_solvated_complex_system.schema
# Solvate the ligand using packmol
solvate_ligand = coordinates.SolvateExistingStructure("solvate_ligand")
solvate_ligand.max_molecules = 1000
solvate_ligand.substance = ProtocolPath("filtered_substance",
filter_solvent.id)
solvate_ligand.solute_coordinate_file = ProtocolPath(
"docked_ligand_coordinate_path", perform_docking.id)
schema.protocols[solvate_ligand.id] = solvate_ligand.schema
# Assign force field parameters to the solvated ligand system.
build_solvated_ligand_system = forcefield.BaseBuildSystem(
"build_solvated_ligand_system")
build_solvated_ligand_system.force_field_path = ProtocolPath(
"force_field_path", "global")
build_solvated_ligand_system.coordinate_file_path = ProtocolPath(
"coordinate_file_path", solvate_ligand.id)
build_solvated_ligand_system.substance = ProtocolPath(
"substance", "global")
schema.protocols[build_solvated_ligand_system.
id] = build_solvated_ligand_system.schema
# Employ YANK to estimate the binding free energy.
yank_protocol = yank.LigandReceptorYankProtocol("yank_protocol")
yank_protocol.thermodynamic_state = ProtocolPath(
"thermodynamic_state", "global")
yank_protocol.number_of_iterations = 2000
yank_protocol.steps_per_iteration = 500
yank_protocol.checkpoint_interval = 10
yank_protocol.verbose = True
yank_protocol.force_field_path = ProtocolPath("force_field_path",
"global")
yank_protocol.ligand_residue_name = ProtocolPath(
"ligand_residue_name", perform_docking.id)
yank_protocol.receptor_residue_name = ProtocolPath(
"receptor_residue_name", perform_docking.id)
yank_protocol.solvated_ligand_coordinates = ProtocolPath(
"coordinate_file_path", solvate_ligand.id)
yank_protocol.solvated_ligand_system = ProtocolPath(
"system_path", build_solvated_ligand_system.id)
yank_protocol.solvated_complex_coordinates = ProtocolPath(
"coordinate_file_path", solvate_complex.id)
yank_protocol.solvated_complex_system = ProtocolPath(
"system_path", build_solvated_complex_system.id)
schema.protocols[yank_protocol.id] = yank_protocol.schema
# Define where the final values come from.
schema.final_value_source = ProtocolPath("estimated_free_energy",
yank_protocol.id)
calculation_schema.workflow_schema = schema
return calculation_schema
def default_simulation_schema(absolute_tolerance=UNDEFINED,
relative_tolerance=UNDEFINED,
n_molecules=2000):
"""Returns the default calculation schema to use when estimating
this class of property from direct simulations.
Parameters
----------
absolute_tolerance: pint.Quantity, optional
The absolute tolerance to estimate the property to within.
relative_tolerance: float
The tolerance (as a fraction of the properties reported
uncertainty) to estimate the property to within.
n_molecules: int
The number of molecules to use in the simulation.
Returns
-------
SimulationSchema
The schema to follow when estimating this property.
"""
assert absolute_tolerance == UNDEFINED or relative_tolerance == UNDEFINED
calculation_schema = SimulationSchema()
calculation_schema.absolute_tolerance = absolute_tolerance
calculation_schema.relative_tolerance = relative_tolerance
use_target_uncertainty = (absolute_tolerance != UNDEFINED
or relative_tolerance != UNDEFINED)
# Setup the fully solvated systems.
build_full_coordinates = coordinates.BuildCoordinatesPackmol(
"build_solvated_coordinates")
build_full_coordinates.substance = ProtocolPath("substance", "global")
build_full_coordinates.max_molecules = n_molecules
assign_full_parameters = forcefield.BaseBuildSystem(
f"assign_solvated_parameters")
assign_full_parameters.force_field_path = ProtocolPath(
"force_field_path", "global")
assign_full_parameters.substance = ProtocolPath("substance", "global")
assign_full_parameters.coordinate_file_path = ProtocolPath(
"coordinate_file_path", build_full_coordinates.id)
# Perform a quick minimisation of the full system to give
# YANK a better starting point for its minimisation.
energy_minimisation = openmm.OpenMMEnergyMinimisation(
"energy_minimisation")
energy_minimisation.system_path = ProtocolPath(
"system_path", assign_full_parameters.id)
energy_minimisation.input_coordinate_file = ProtocolPath(
"coordinate_file_path", build_full_coordinates.id)
equilibration_simulation = openmm.OpenMMSimulation(
"equilibration_simulation")
equilibration_simulation.ensemble = Ensemble.NPT
equilibration_simulation.steps_per_iteration = 100000
equilibration_simulation.output_frequency = 10000
equilibration_simulation.timestep = 2.0 * unit.femtosecond
equilibration_simulation.thermodynamic_state = ProtocolPath(
"thermodynamic_state", "global")
equilibration_simulation.system_path = ProtocolPath(
"system_path", assign_full_parameters.id)
equilibration_simulation.input_coordinate_file = ProtocolPath(
"output_coordinate_file", energy_minimisation.id)
# Create a substance which only contains the solute (e.g. for the
# vacuum phase simulations).
filter_solvent = miscellaneous.FilterSubstanceByRole("filter_solvent")
filter_solvent.input_substance = ProtocolPath("substance", "global")
filter_solvent.component_role = Component.Role.Solvent
filter_solute = miscellaneous.FilterSubstanceByRole("filter_solute")
filter_solute.input_substance = ProtocolPath("substance", "global")
filter_solute.component_role = Component.Role.Solute
# Setup the solute in vacuum system.
build_vacuum_coordinates = coordinates.BuildCoordinatesPackmol(
"build_vacuum_coordinates")
build_vacuum_coordinates.substance = ProtocolPath(
"filtered_substance", filter_solute.id)
build_vacuum_coordinates.max_molecules = 1
assign_vacuum_parameters = forcefield.BaseBuildSystem(
f"assign_parameters")
assign_vacuum_parameters.force_field_path = ProtocolPath(
"force_field_path", "global")
assign_vacuum_parameters.substance = ProtocolPath(
"filtered_substance", filter_solute.id)
assign_vacuum_parameters.coordinate_file_path = ProtocolPath(
"coordinate_file_path", build_vacuum_coordinates.id)
# Set up the protocol to run yank.
run_yank = yank.SolvationYankProtocol("run_solvation_yank")
run_yank.solute = ProtocolPath("filtered_substance", filter_solute.id)
run_yank.solvent_1 = ProtocolPath("filtered_substance",
filter_solvent.id)
run_yank.solvent_2 = Substance()
run_yank.thermodynamic_state = ProtocolPath("thermodynamic_state",
"global")
run_yank.steps_per_iteration = 500
run_yank.checkpoint_interval = 50
run_yank.solvent_1_coordinates = ProtocolPath(
"output_coordinate_file", equilibration_simulation.id)
run_yank.solvent_1_system = ProtocolPath("system_path",
assign_full_parameters.id)
run_yank.solvent_2_coordinates = ProtocolPath(
"coordinate_file_path", build_vacuum_coordinates.id)
run_yank.solvent_2_system = ProtocolPath("system_path",
assign_vacuum_parameters.id)
# Set up the group which will run yank until the free energy has been determined to within
# a given uncertainty
conditional_group = groups.ConditionalGroup(f"conditional_group")
conditional_group.max_iterations = 20
if use_target_uncertainty:
condition = groups.ConditionalGroup.Condition()
condition.type = groups.ConditionalGroup.Condition.Type.LessThan
condition.right_hand_value = ProtocolPath("target_uncertainty",
"global")
condition.left_hand_value = ProtocolPath(
"estimated_free_energy.error", conditional_group.id,
run_yank.id)
conditional_group.add_condition(condition)
# Define the total number of iterations that yank should run for.
total_iterations = miscellaneous.MultiplyValue("total_iterations")
total_iterations.value = 2000
total_iterations.multiplier = ProtocolPath("current_iteration",
conditional_group.id)
# Make sure the simulations gets extended after each iteration.
run_yank.number_of_iterations = ProtocolPath("result",
total_iterations.id)
conditional_group.add_protocols(total_iterations, run_yank)
# Define the full workflow schema.
schema = WorkflowSchema()
schema.protocol_schemas = [
build_full_coordinates.schema,
assign_full_parameters.schema,
energy_minimisation.schema,
equilibration_simulation.schema,
filter_solvent.schema,
filter_solute.schema,
build_vacuum_coordinates.schema,
assign_vacuum_parameters.schema,
conditional_group.schema,
]
schema.final_value_source = ProtocolPath("estimated_free_energy",
conditional_group.id,
run_yank.id)
calculation_schema.workflow_schema = schema
return calculation_schema
def default_reweighting_schema(
absolute_tolerance=UNDEFINED,
relative_tolerance=UNDEFINED,
n_effective_samples=50,
):
"""Returns the default calculation schema to use when estimating
this property by reweighting existing data.
Parameters
----------
absolute_tolerance: pint.Quantity, optional
The absolute tolerance to estimate the property to within.
relative_tolerance: float
The tolerance (as a fraction of the properties reported
uncertainty) to estimate the property to within.
n_effective_samples: int
The minimum number of effective samples to require when
reweighting the cached simulation data.
Returns
-------
ReweightingSchema
The schema to follow when estimating this property.
"""
assert absolute_tolerance == UNDEFINED or relative_tolerance == UNDEFINED
calculation_schema = ReweightingSchema()
calculation_schema.absolute_tolerance = absolute_tolerance
calculation_schema.relative_tolerance = relative_tolerance
data_replicator_id = "data_replicator"
# Set up a protocol to extract the dielectric constant from the stored data.
extract_dielectric = ExtractAverageDielectric(
f"calc_dielectric_$({data_replicator_id})"
)
# For the dielectric constant, we employ a slightly more advanced reweighting
# protocol set up for calculating fluctuation properties.
reweight_dielectric = ReweightDielectricConstant("reweight_dielectric")
reweight_dielectric.reference_dipole_moments = ProtocolPath(
"uncorrelated_values", extract_dielectric.id
)
reweight_dielectric.reference_volumes = ProtocolPath(
"uncorrelated_volumes", extract_dielectric.id
)
reweight_dielectric.thermodynamic_state = ProtocolPath(
"thermodynamic_state", "global"
)
reweight_dielectric.bootstrap_uncertainties = True
reweight_dielectric.bootstrap_iterations = 200
reweight_dielectric.required_effective_samples = n_effective_samples
protocols, data_replicator = generate_base_reweighting_protocols(
extract_dielectric, reweight_dielectric, data_replicator_id
)
# Make sure input is taken from the correct protocol outputs.
extract_dielectric.system_path = ProtocolPath(
"system_path", protocols.build_reference_system.id
)
extract_dielectric.thermodynamic_state = ProtocolPath(
"thermodynamic_state", protocols.unpack_stored_data.id
)
# Set up the gradient calculations
coordinate_path = ProtocolPath(
"output_coordinate_path", protocols.concatenate_trajectories.id
)
trajectory_path = ProtocolPath(
"output_trajectory_path", protocols.concatenate_trajectories.id
)
statistics_path = ProtocolPath(
"statistics_file_path", protocols.reduced_target_potential.id
)
reweight_dielectric_template = copy.deepcopy(reweight_dielectric)
(
gradient_group,
gradient_replicator,
gradient_source,
) = generate_gradient_protocol_group(
reweight_dielectric_template,
ProtocolPath("force_field_path", "global"),
coordinate_path,
trajectory_path,
statistics_path,
replicator_id="grad",
effective_sample_indices=ProtocolPath(
"effective_sample_indices", reweight_dielectric.id
),
)
schema = WorkflowSchema()
schema.protocol_schemas = [
*(x.schema for x in protocols),
gradient_group.schema,
]
schema.protocol_replicators = [data_replicator, gradient_replicator]
schema.gradients_sources = [gradient_source]
schema.final_value_source = ProtocolPath("value", protocols.mbar_protocol.id)
calculation_schema.workflow_schema = schema
return calculation_schema
def default_simulation_schema(
absolute_tolerance=UNDEFINED, relative_tolerance=UNDEFINED, n_molecules=1000
):
"""Returns the default calculation schema to use when estimating
this class of property from direct simulations.
Parameters
----------
absolute_tolerance: pint.Quantity, optional
The absolute tolerance to estimate the property to within.
relative_tolerance: float
The tolerance (as a fraction of the properties reported
uncertainty) to estimate the property to within.
n_molecules: int
The number of molecules to use in the simulation.
Returns
-------
SimulationSchema
The schema to follow when estimating this property.
"""
assert absolute_tolerance == UNDEFINED or relative_tolerance == UNDEFINED
calculation_schema = SimulationSchema()
calculation_schema.absolute_tolerance = absolute_tolerance
calculation_schema.relative_tolerance = relative_tolerance
# Define the protocol which will extract the average dielectric constant
# from the results of a simulation.
extract_dielectric = ExtractAverageDielectric("extract_dielectric")
extract_dielectric.thermodynamic_state = ProtocolPath(
"thermodynamic_state", "global"
)
# Define the protocols which will run the simulation itself.
use_target_uncertainty = (
absolute_tolerance != UNDEFINED or relative_tolerance != UNDEFINED
)
protocols, value_source, output_to_store = generate_base_simulation_protocols(
extract_dielectric, use_target_uncertainty, n_molecules=n_molecules,
)
# Make sure the input of the analysis protcol is properly hooked up.
extract_dielectric.system_path = ProtocolPath(
"system_path", protocols.assign_parameters.id
)
# Dielectric constants typically take longer to converge, so we need to
# reflect this in the maximum number of convergence iterations.
protocols.converge_uncertainty.max_iterations = 400
# Set up the gradient calculations. For dielectric constants, we need to use
# a slightly specialised reweighting protocol which we set up here.
coordinate_source = ProtocolPath(
"output_coordinate_file", protocols.equilibration_simulation.id
)
trajectory_source = ProtocolPath(
"trajectory_file_path",
protocols.converge_uncertainty.id,
protocols.production_simulation.id,
)
statistics_source = ProtocolPath(
"statistics_file_path",
protocols.converge_uncertainty.id,
protocols.production_simulation.id,
)
gradient_mbar_protocol = ReweightDielectricConstant("gradient_mbar")
gradient_mbar_protocol.reference_dipole_moments = [
ProtocolPath(
"dipole_moments",
protocols.converge_uncertainty.id,
extract_dielectric.id,
)
]
gradient_mbar_protocol.reference_volumes = [
ProtocolPath(
"volumes", protocols.converge_uncertainty.id, extract_dielectric.id
)
]
gradient_mbar_protocol.thermodynamic_state = ProtocolPath(
"thermodynamic_state", "global"
)
gradient_mbar_protocol.reference_reduced_potentials = statistics_source
(
gradient_group,
gradient_replicator,
gradient_source,
) = generate_gradient_protocol_group(
gradient_mbar_protocol,
ProtocolPath("force_field_path", "global"),
coordinate_source,
trajectory_source,
statistics_source,
)
# Build the workflow schema.
schema = WorkflowSchema()
schema.protocol_schemas = [
protocols.build_coordinates.schema,
protocols.assign_parameters.schema,
protocols.energy_minimisation.schema,
protocols.equilibration_simulation.schema,
protocols.converge_uncertainty.schema,
protocols.extract_uncorrelated_trajectory.schema,
protocols.extract_uncorrelated_statistics.schema,
gradient_group.schema,
]
schema.protocol_replicators = [gradient_replicator]
schema.outputs_to_store = {"full_system": output_to_store}
schema.gradients_sources = [gradient_source]
schema.final_value_source = value_source
calculation_schema.workflow_schema = schema
return calculation_schema
def default_reweighting_schema(
absolute_tolerance=UNDEFINED,
relative_tolerance=UNDEFINED,
n_effective_samples=50,
):
"""Returns the default calculation schema to use when estimating
this property by reweighting existing data.
Parameters
----------
absolute_tolerance: pint.Quantity, optional
The absolute tolerance to estimate the property to within.
relative_tolerance: float
The tolerance (as a fraction of the properties reported
uncertainty) to estimate the property to within.
n_effective_samples: int
The minimum number of effective samples to require when
reweighting the cached simulation data.
Returns
-------
ReweightingSchema
The schema to follow when estimating this property.
"""
assert absolute_tolerance == UNDEFINED or relative_tolerance == UNDEFINED
calculation_schema = ReweightingSchema()
calculation_schema.absolute_tolerance = absolute_tolerance
calculation_schema.relative_tolerance = relative_tolerance
# Set up the storage queries
calculation_schema.storage_queries = (
ExcessMolarVolume._default_reweighting_storage_query()
)
# Set up a replicator that will re-run the component reweighting workflow for each
# component in the system.
component_replicator = ProtocolReplicator(replicator_id="component_replicator")
component_replicator.template_values = ProtocolPath("components", "global")
gradient_replicator = ProtocolReplicator("gradient")
gradient_replicator.template_values = ProtocolPath(
"parameter_gradient_keys", "global"
)
# Set up the protocols which will reweight data for the full system.
full_data_replicator_id = "full_data_replicator"
(
full_protocols,
full_volume,
full_data_replicator,
full_gradient_group,
full_gradient_source,
) = ExcessMolarVolume._get_reweighting_protocols(
"_full",
gradient_replicator.id,
full_data_replicator_id,
n_effective_samples=n_effective_samples,
)
# Set up the protocols which will reweight data for each component.
component_data_replicator_id = (
f"component_{component_replicator.placeholder_id}_data_replicator"
)
(
component_protocols,
component_volumes,
component_data_replicator,
component_gradient_group,
component_gradient_source,
) = ExcessMolarVolume._get_reweighting_protocols(
"_component",
gradient_replicator.id,
component_data_replicator_id,
replicator_id=component_replicator.id,
weight_by_mole_fraction=True,
substance_reference=ReplicatorValue(component_replicator.id),
n_effective_samples=n_effective_samples,
)
# Make sure the replicator is only replicating over component data.
component_data_replicator.template_values = ProtocolPath(
f"component_data[$({component_replicator.id})]", "global"
)
add_component_molar_volumes = miscellaneous.AddValues(
"add_component_molar_volumes"
)
add_component_molar_volumes.values = component_volumes
calculate_excess_volume = miscellaneous.SubtractValues(
"calculate_excess_potential"
)
calculate_excess_volume.value_b = full_volume
calculate_excess_volume.value_a = ProtocolPath(
"result", add_component_molar_volumes.id
)
# Combine the gradients.
add_component_gradients = miscellaneous.AddValues(
f"add_component_gradients" f"_{gradient_replicator.placeholder_id}"
)
add_component_gradients.values = component_gradient_source
combine_gradients = miscellaneous.SubtractValues(
f"combine_gradients_{gradient_replicator.placeholder_id}"
)
combine_gradients.value_b = full_gradient_source
combine_gradients.value_a = ProtocolPath("result", add_component_gradients.id)
# Build the final workflow schema.
schema = WorkflowSchema()
schema.protocol_schemas = [
*(x.schema for x in full_protocols),
*(x.schema for x in component_protocols),
add_component_molar_volumes.schema,
calculate_excess_volume.schema,
full_gradient_group.schema,
component_gradient_group.schema,
add_component_gradients.schema,
combine_gradients.schema,
]
schema.protocol_replicators = [
full_data_replicator,
component_replicator,
component_data_replicator,
gradient_replicator,
]
schema.gradients_sources = [ProtocolPath("result", combine_gradients.id)]
schema.final_value_source = ProtocolPath("result", calculate_excess_volume.id)
calculation_schema.workflow_schema = schema
return calculation_schema
def default_simulation_schema(
absolute_tolerance=UNDEFINED, relative_tolerance=UNDEFINED, n_molecules=1000
):
"""Returns the default calculation schema to use when estimating
this class of property from direct simulations.
Parameters
----------
absolute_tolerance: pint.Quantity, optional
The absolute tolerance to estimate the property to within.
relative_tolerance: float
The tolerance (as a fraction of the properties reported
uncertainty) to estimate the property to within.
n_molecules: int
The number of molecules to use in the simulation.
Returns
-------
SimulationSchema
The schema to follow when estimating this property.
"""
assert absolute_tolerance == UNDEFINED or relative_tolerance == UNDEFINED
calculation_schema = SimulationSchema()
calculation_schema.absolute_tolerance = absolute_tolerance
calculation_schema.relative_tolerance = relative_tolerance
use_target_uncertainty = (
absolute_tolerance != UNDEFINED or relative_tolerance != UNDEFINED
)
# Define the id of the replicator which will clone the gradient protocols
# for each gradient key to be estimated.
gradient_replicator_id = "gradient_replicator"
# Set up a workflow to calculate the molar volume of the full, mixed system.
(
full_system_protocols,
full_system_molar_molecules,
full_system_volume,
full_output,
full_system_gradient_group,
full_system_gradient_replicator,
full_system_gradient,
) = ExcessMolarVolume._get_simulation_protocols(
"_full",
gradient_replicator_id,
use_target_uncertainty=use_target_uncertainty,
n_molecules=n_molecules,
)
# Set up a general workflow for calculating the molar volume of one of the system components.
component_replicator_id = "component_replicator"
component_substance = ReplicatorValue(component_replicator_id)
# Make sure to weight by the mole fractions of the actual full system as these may be slightly
# different to the mole fractions of the measure property due to rounding.
full_substance = ProtocolPath(
"output_substance", full_system_protocols.build_coordinates.id
)
(
component_protocols,
component_molar_molecules,
component_volumes,
component_output,
component_gradient_group,
component_gradient_replicator,
component_gradient,
) = ExcessMolarVolume._get_simulation_protocols(
"_component",
gradient_replicator_id,
replicator_id=component_replicator_id,
weight_by_mole_fraction=True,
component_substance_reference=component_substance,
full_substance_reference=full_substance,
use_target_uncertainty=use_target_uncertainty,
n_molecules=n_molecules,
)
# Finally, set up the protocols which will be responsible for adding together
# the component molar volumes, and subtracting these from the mixed system molar volume.
add_component_molar_volumes = miscellaneous.AddValues(
"add_component_molar_volumes"
)
add_component_molar_volumes.values = component_volumes
calculate_excess_volume = miscellaneous.SubtractValues(
"calculate_excess_volume"
)
calculate_excess_volume.value_b = full_system_volume
calculate_excess_volume.value_a = ProtocolPath(
"result", add_component_molar_volumes.id
)
# Create the replicator object which defines how the pure component
# molar volume estimation protocols will be replicated for each component.
component_replicator = ProtocolReplicator(replicator_id=component_replicator_id)
component_replicator.template_values = ProtocolPath("components", "global")
# Combine the gradients.
add_component_gradients = miscellaneous.AddValues(
f"add_component_gradients" f"_$({gradient_replicator_id})"
)
add_component_gradients.values = component_gradient
combine_gradients = miscellaneous.SubtractValues(
f"combine_gradients_$({gradient_replicator_id})"
)
combine_gradients.value_b = full_system_gradient
combine_gradients.value_a = ProtocolPath("result", add_component_gradients.id)
# Combine the gradient replicators.
gradient_replicator = ProtocolReplicator(replicator_id=gradient_replicator_id)
gradient_replicator.template_values = ProtocolPath(
"parameter_gradient_keys", "global"
)
# Build the final workflow schema
schema = WorkflowSchema()
schema.protocol_schemas = [
component_protocols.build_coordinates.schema,
component_protocols.assign_parameters.schema,
component_protocols.energy_minimisation.schema,
component_protocols.equilibration_simulation.schema,
component_protocols.converge_uncertainty.schema,
component_molar_molecules.schema,
full_system_protocols.build_coordinates.schema,
full_system_protocols.assign_parameters.schema,
full_system_protocols.energy_minimisation.schema,
full_system_protocols.equilibration_simulation.schema,
full_system_protocols.converge_uncertainty.schema,
full_system_molar_molecules.schema,
component_protocols.extract_uncorrelated_trajectory.schema,
component_protocols.extract_uncorrelated_statistics.schema,
full_system_protocols.extract_uncorrelated_trajectory.schema,
full_system_protocols.extract_uncorrelated_statistics.schema,
add_component_molar_volumes.schema,
calculate_excess_volume.schema,
component_gradient_group.schema,
full_system_gradient_group.schema,
add_component_gradients.schema,
combine_gradients.schema,
]
schema.protocol_replicators = [gradient_replicator, component_replicator]
# Finally, tell the schemas where to look for its final values.
schema.gradients_sources = [ProtocolPath("result", combine_gradients.id)]
schema.final_value_source = ProtocolPath("result", calculate_excess_volume.id)
schema.outputs_to_store = {
"full_system": full_output,
f"component_$({component_replicator_id})": component_output,
}
calculation_schema.workflow_schema = schema
return calculation_schema
def default_simulation_schema(
absolute_tolerance=UNDEFINED, relative_tolerance=UNDEFINED, n_molecules=1000
):
"""Returns the default calculation schema to use when estimating
this class of property from direct simulations.
Parameters
----------
absolute_tolerance: pint.Quantity, optional
The absolute tolerance to estimate the property to within.
relative_tolerance: float
The tolerance (as a fraction of the properties reported
uncertainty) to estimate the property to within.
n_molecules: int
The number of molecules to use in the simulation.
Returns
-------
SimulationSchema
The schema to follow when estimating this property.
"""
assert absolute_tolerance == UNDEFINED or relative_tolerance == UNDEFINED
calculation_schema = SimulationSchema()
calculation_schema.absolute_tolerance = absolute_tolerance
calculation_schema.relative_tolerance = relative_tolerance
use_target_uncertainty = (
absolute_tolerance != UNDEFINED or relative_tolerance != UNDEFINED
)
# Define the protocol which will extract the average density from
# the results of a simulation.
extract_density = analysis.ExtractAverageStatistic("extract_density")
extract_density.statistics_type = ObservableType.Density
# Define the protocols which will run the simulation itself.
protocols, value_source, output_to_store = generate_base_simulation_protocols(
extract_density, use_target_uncertainty, n_molecules=n_molecules,
)
# Set up the gradient calculations
coordinate_source = ProtocolPath(
"output_coordinate_file", protocols.equilibration_simulation.id
)
trajectory_source = ProtocolPath(
"trajectory_file_path",
protocols.converge_uncertainty.id,
protocols.production_simulation.id,
)
statistics_source = ProtocolPath(
"statistics_file_path",
protocols.converge_uncertainty.id,
protocols.production_simulation.id,
)
reweight_density_template = reweighting.ReweightStatistics("")
reweight_density_template.statistics_type = ObservableType.Density
reweight_density_template.statistics_paths = statistics_source
reweight_density_template.reference_reduced_potentials = statistics_source
(
gradient_group,
gradient_replicator,
gradient_source,
) = generate_gradient_protocol_group(
reweight_density_template,
ProtocolPath("force_field_path", "global"),
coordinate_source,
trajectory_source,
statistics_source,
)
# Build the workflow schema.
schema = WorkflowSchema()
schema.protocol_schemas = [
protocols.build_coordinates.schema,
protocols.assign_parameters.schema,
protocols.energy_minimisation.schema,
protocols.equilibration_simulation.schema,
protocols.converge_uncertainty.schema,
protocols.extract_uncorrelated_trajectory.schema,
protocols.extract_uncorrelated_statistics.schema,
gradient_group.schema,
]
schema.protocol_replicators = [gradient_replicator]
schema.outputs_to_store = {"full_system": output_to_store}
schema.gradients_sources = [gradient_source]
schema.final_value_source = value_source
calculation_schema.workflow_schema = schema
return calculation_schema
def default_reweighting_schema(
absolute_tolerance=UNDEFINED,
relative_tolerance=UNDEFINED,
n_effective_samples=50,
):
"""Returns the default calculation schema to use when estimating
this property by reweighting existing data.
Parameters
----------
absolute_tolerance: pint.Quantity, optional
The absolute tolerance to estimate the property to within.
relative_tolerance: float
The tolerance (as a fraction of the properties reported
uncertainty) to estimate the property to within.
n_effective_samples: int
The minimum number of effective samples to require when
reweighting the cached simulation data.
Returns
-------
ReweightingSchema
The schema to follow when estimating this property.
"""
assert absolute_tolerance == UNDEFINED or relative_tolerance == UNDEFINED
calculation_schema = ReweightingSchema()
calculation_schema.absolute_tolerance = absolute_tolerance
calculation_schema.relative_tolerance = relative_tolerance
data_replicator_id = "data_replicator"
# The protocol which will be used to calculate the densities from
# the existing data.
density_calculation = analysis.ExtractAverageStatistic(
f"calc_density_$({data_replicator_id})"
)
density_calculation.statistics_type = ObservableType.Density
reweight_density = reweighting.ReweightStatistics(f"reweight_density")
reweight_density.statistics_type = ObservableType.Density
reweight_density.required_effective_samples = n_effective_samples
protocols, data_replicator = generate_base_reweighting_protocols(
density_calculation, reweight_density, data_replicator_id
)
# Set up the gradient calculations
coordinate_path = ProtocolPath(
"output_coordinate_path", protocols.concatenate_trajectories.id
)
trajectory_path = ProtocolPath(
"output_trajectory_path", protocols.concatenate_trajectories.id
)
statistics_path = ProtocolPath(
"statistics_file_path", protocols.reduced_target_potential.id
)
reweight_density_template = copy.deepcopy(reweight_density)
(
gradient_group,
gradient_replicator,
gradient_source,
) = generate_gradient_protocol_group(
reweight_density_template,
ProtocolPath("force_field_path", "global"),
coordinate_path,
trajectory_path,
statistics_path,
replicator_id="grad",
effective_sample_indices=ProtocolPath(
"effective_sample_indices", protocols.mbar_protocol.id
),
)
schema = WorkflowSchema()
schema.protocol_schemas = [
*(x.schema for x in protocols),
gradient_group.schema,
]
schema.protocol_replicators = [data_replicator, gradient_replicator]
schema.gradients_sources = [gradient_source]
schema.final_value_source = ProtocolPath("value", protocols.mbar_protocol.id)
calculation_schema.workflow_schema = schema
return calculation_schema