def mc_digital_out(board_num, bit_num, bit_value):
digital_props = DigitalProps(board_num)
port = next(
(port for port in digital_props.port_info if port.supports_output),
None)
if port == None:
util.print_unsupported_example(board_num)
# If the port is configurable, configure it for output.
if port.is_port_configurable:
ul.d_config_port(board_num, port.type, DigitalIODirection.OUT)
port_value = 0xFF
print("Setting " + port.type.name + " to " + str(port_value) + ".")
# Output the value to the port
ul.d_out(board_num, port.type, port_value)
# bit_num = 0 #CH0 --> normally high
# bit_value = 1 ##set 5V to HIGH, power the sensor
print("Setting " + port.type.name + " bit " + str(bit_num) + " to " +
str(bit_value) + ".")
# Output the value to the bit
ul.d_bit_out(board_num, port.type, bit_num, bit_value)
def __init__(self, master=None):
super(ULDO01, self).__init__(master)
master.protocol("WM_DELETE_WINDOW", self.exit)
self.board_num = 0
self.digital_props = DigitalProps(self.board_num)
# Find the first port that supports output, defaulting to None
# if one is not found.
self.port = next(
(port
for port in self.digital_props.port_info if port.supports_output),
None)
# If the port is configurable, configure it for output
if self.port != None and self.port.is_port_configurable:
try:
ul.d_config_port(self.board_num, self.port.type,
DigitalIODirection.OUT)
except ULError as e:
self.show_ul_error(e)
self.running = False
self.create_widgets()
def __init__(self, master=None):
super(ULDI03, self).__init__(master)
self.board_num = 0
self.digital_props = DigitalProps(self.board_num)
# Find the first port that supports input, defaulting to None
# if one is not found.
self.port = next((port for port in self.digital_props.port_info
if port.supports_input_scan), None)
self.create_widgets()
def __init__(self, master=None):
super(DaqOutScan01, self).__init__(master)
self.board_num = 0
self.daqo_props = DaqOutputProps(self.board_num)
if self.daqo_props.is_supported:
self.ao_props = AnalogOutputProps(self.board_num)
self.digital_props = DigitalProps(self.board_num)
self.init_scan_channel_info()
self.create_widgets()
def __init__(self, master=None):
super(DaqInScan01, self).__init__(master)
self.board_num = 0
self.daqi_props = DaqInputProps(self.board_num)
self.ai_props = AnalogInputProps(self.board_num)
self.digital_props = DigitalProps(self.board_num)
self.counter_props = CounterProps(self.board_num)
self.init_scan_channel_info()
self.create_widgets()
def __init__(self, master=None):
super(ULDI06, self).__init__(master)
self.board_num = 0
self.digital_props = DigitalProps(self.board_num)
# Find the first port that supports input, defaulting to None
# if one is not found.
self.port = next(
(port for port in self.digital_props.port_info
if (port.supports_input and port.is_bit_configurable)), None)
self.running = False
self.create_widgets()
def __init__(self, master=None):
super(DaqSetSetpoints01, self).__init__(master)
self.board_num = 0
self.daqi_props = DaqInputProps(self.board_num)
example_supported = (self.daqi_props.is_supported
and self.daqi_props.supports_setpoints)
if example_supported:
self.ai_props = AnalogInputProps(self.board_num)
self.digital_props = DigitalProps(self.board_num)
self.counter_props = CounterProps(self.board_num)
self.init_scan_channel_info()
self.init_setpoints()
self.create_widgets()
def run_example():
board_num = 0
if use_device_detection:
ul.ignore_instacal()
if not util.config_first_detected_device(board_num):
print("Could not find device.")
return
digital_props = DigitalProps(board_num)
# Find the first port that supports input, defaulting to None
# if one is not found.
port = next(
(port for port in digital_props.port_info
if port.supports_output), None)
if port == None:
util.print_unsupported_example(board_num)
return
try:
# If the port is configurable, configure it for output.
if port.is_port_configurable:
ul.d_config_port(board_num, port.type, DigitalIODirection.OUT)
port_value = 0xFF
print(
"Setting " + port.type.name + " to " + str(port_value) + ".")
# Output the value to the port
ul.d_out(board_num, port.type, port_value)
bit_num = 0
bit_value = 0
print(
"Setting " + port.type.name + " bit " + str(bit_num) + " to "
+ str(bit_value) + ".")
# Output the value to the bit
ul.d_bit_out(board_num, port.type, bit_num, bit_value)
except ULError as e:
util.print_ul_error(e)
finally:
if use_device_detection:
ul.release_daq_device(board_num)
def run_example():
board_num = 0
if use_device_detection:
ul.ignore_instacal()
if not util.config_first_detected_device(board_num):
print("Could not find device.")
return
digital_props = DigitalProps(board_num)
# Find the first port that supports input, defaulting to None
# if one is not found.
port = next(
(port for port in digital_props.port_info if port.supports_input),
None)
if port == None:
util.print_unsupported_example(board_num)
return
try:
# If the port is configurable, configure it for input.
if port.is_port_configurable:
ul.d_config_port(board_num, port.type, DigitalIODirection.IN)
# Get a value from the digital port
port_value = ul.d_in(board_num, port.type)
# Get a value from the first digital bit
bit_num = 0
bit_value = ul.d_bit_in(board_num, port.type, bit_num)
# Display the port value
print(port.type.name + " Value: " + str(port_value))
# Display the bit value
print("Bit " + str(bit_num) + " Value: " + str(bit_value))
except ULError as e:
util.print_ul_error(e)
finally:
if use_device_detection:
ul.release_daq_device(board_num)
