def writeOutput(fileName=''):
"Alternate shell file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName == '':
return
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'altshell')
def writeOutput(fileName=''):
"Chamber a gcode linear move file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName == '':
return
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'chamber')
def writeOutput(fileName=''):
"Preface the carving of a gcode file. If no fileName is specified, preface the first unmodified gcode file in this folder."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName == '':
return
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'preface')
def writeOutput(fileName=''):
"Export a gcode linear move file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName == '':
return
exportRepository = ExportRepository()
settings.getReadRepository(exportRepository)
startTime = time.time()
print('File ' + gcodec.getSummarizedFileName(fileName) +
' is being chain exported.')
Filehandle = open('report.txt', 'w')
Filehandle.write('File ' + gcodec.getSummarizedFileName(fileName) +
' is being chain exported.\n')
Filehandle.close()
suffixFileName = fileName[:fileName.rfind(
'.')] + '_export.' + exportRepository.fileExtension.value
gcodeText = gcodec.getGcodeFileText(fileName, '')
procedures = skeinforge_craft.getProcedures('export', gcodeText)
gcodeText = skeinforge_craft.getChainTextFromProcedures(
fileName, procedures[:-1], gcodeText)
if gcodeText == '':
return
skeinforge_analyze.writeOutput(suffixFileName, gcodeText)
if exportRepository.savePenultimateGcode.value:
penultimateFileName = fileName[:fileName.
rfind('.')] + '_penultimate.gcode'
gcodec.writeFileText(penultimateFileName, gcodeText)
print('The penultimate file is saved as ' +
gcodec.getSummarizedFileName(penultimateFileName))
exportChainGcode = getCraftedTextFromText(gcodeText, exportRepository)
replaceableExportChainGcode = None
selectedPluginModule = getSelectedPluginModule(
exportRepository.exportPlugins)
if selectedPluginModule == None:
replaceableExportChainGcode = exportChainGcode
else:
if selectedPluginModule.isReplaceable():
replaceableExportChainGcode = selectedPluginModule.getOutput(
exportChainGcode)
else:
selectedPluginModule.writeOutput(suffixFileName, exportChainGcode)
if replaceableExportChainGcode != None:
replaceableExportChainGcode = getReplaced(replaceableExportChainGcode)
gcodec.writeFileText(suffixFileName, replaceableExportChainGcode)
print('The exported file is saved as ' +
gcodec.getSummarizedFileName(suffixFileName))
if exportRepository.alsoSendOutputTo.value != '':
if replaceableExportChainGcode == None:
replaceableExportChainGcode = selectedPluginModule.getOutput(
exportChainGcode)
exec('print >> ' + exportRepository.alsoSendOutputTo.value +
', replaceableExportChainGcode')
print('It took ' + str(int(round(time.time() - startTime))) +
' seconds to export the file.')
Filehandle = open('report.txt', 'a')
Filehandle.write('It took ' + str(int(round(time.time() - startTime))) +
' seconds to export the file.')
Filehandle.close()
def writeOutput(fileName=''):
'Export a gcode linear move file.'
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName == '':
return
repository = ExportRepository()
settings.getReadRepository(repository)
startTime = time.time()
print('File ' + archive.getSummarizedFileName(fileName) +
' is being chain exported.')
suffixFileName = fileName[:fileName.rfind('.')]
if repository.addExportSuffix.value:
suffixFileName += '_export'
suffixFileName += '.' + repository.fileExtension.value
gcodeText = gcodec.getGcodeFileText(fileName, '')
procedures = skeinforge_craft.getProcedures('export', gcodeText)
gcodeText = skeinforge_craft.getChainTextFromProcedures(
fileName, procedures[:-1], gcodeText)
if gcodeText == '':
return
window = skeinforge_analyze.writeOutput(fileName, suffixFileName,
gcodeText)
if repository.savePenultimateGcode.value:
penultimateFileName = fileName[:fileName.
rfind('.')] + '_penultimate.gcode'
archive.writeFileText(penultimateFileName, gcodeText)
print('The penultimate file is saved as ' +
archive.getSummarizedFileName(penultimateFileName))
exportChainGcode = getCraftedTextFromText(gcodeText, repository)
replaceableExportChainGcode = None
selectedPluginModule = getSelectedPluginModule(repository.exportPlugins)
if selectedPluginModule == None:
replaceableExportChainGcode = exportChainGcode
else:
if selectedPluginModule.globalIsReplaceable:
replaceableExportChainGcode = selectedPluginModule.getOutput(
exportChainGcode)
else:
selectedPluginModule.writeOutput(suffixFileName, exportChainGcode)
if replaceableExportChainGcode != None:
replaceableExportChainGcode = getReplaced(replaceableExportChainGcode)
archive.writeFileText(suffixFileName, replaceableExportChainGcode)
print('The exported file is saved as ' +
archive.getSummarizedFileName(suffixFileName))
if repository.alsoSendOutputTo.value != '':
if replaceableExportChainGcode == None:
replaceableExportChainGcode = selectedPluginModule.getOutput(
exportChainGcode)
exec('print >> ' + repository.alsoSendOutputTo.value +
', replaceableExportChainGcode')
print('It took %s to export the file.' %
euclidean.getDurationString(time.time() - startTime))
return window
def writeOutput( fileName = '' ):
"Export a gcode linear move file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified( fileName )
if fileName == '':
return
exportRepository = ExportRepository()
settings.getReadRepository( exportRepository )
startTime = time.time()
print( 'File ' + gcodec.getSummarizedFileName( fileName ) + ' is being chain exported.' )
Filehandle = open ('report.txt', 'w')
Filehandle.write ('File ' + gcodec.getSummarizedFileName( fileName ) + ' is being chain exported.\n')
Filehandle.close ()
suffixFileName = fileName[ : fileName.rfind( '.' ) ] + '_export.' + exportRepository.fileExtension.value
gcodeText = gcodec.getGcodeFileText( fileName, '' )
procedures = skeinforge_craft.getProcedures( 'export', gcodeText )
gcodeText = skeinforge_craft.getChainTextFromProcedures( fileName, procedures[ : - 1 ], gcodeText )
if gcodeText == '':
return
skeinforge_analyze.writeOutput( suffixFileName, gcodeText )
if exportRepository.savePenultimateGcode.value:
penultimateFileName = fileName[ : fileName.rfind( '.' ) ] + '_penultimate.gcode'
gcodec.writeFileText( penultimateFileName, gcodeText )
print( 'The penultimate file is saved as ' + gcodec.getSummarizedFileName( penultimateFileName ) )
exportChainGcode = getCraftedTextFromText( gcodeText, exportRepository )
replaceableExportChainGcode = None
selectedPluginModule = getSelectedPluginModule( exportRepository.exportPlugins )
if selectedPluginModule == None:
replaceableExportChainGcode = exportChainGcode
else:
if selectedPluginModule.isReplaceable():
replaceableExportChainGcode = selectedPluginModule.getOutput( exportChainGcode )
else:
selectedPluginModule.writeOutput( suffixFileName, exportChainGcode )
if replaceableExportChainGcode != None:
replaceableExportChainGcode = getReplaced( replaceableExportChainGcode )
gcodec.writeFileText( suffixFileName, replaceableExportChainGcode )
print( 'The exported file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) )
if exportRepository.alsoSendOutputTo.value != '':
if replaceableExportChainGcode == None:
replaceableExportChainGcode = selectedPluginModule.getOutput( exportChainGcode )
exec( 'print >> ' + exportRepository.alsoSendOutputTo.value + ', replaceableExportChainGcode' )
print( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to export the file.' )
Filehandle = open ('report.txt', 'a')
Filehandle.write ('It took '+ str( int( round( time.time() - startTime ) ) )+' seconds to export the file.')
Filehandle.close ()
def writeOutput(fileName=''):
'Export a gcode linear move file.'
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName)
if fileName == '':
return
repository = ExportRepository()
settings.getReadRepository(repository)
startTime = time.time()
print('File ' + archive.getSummarizedFileName(fileName) + ' is being chain exported.')
suffixFileName = fileName[: fileName.rfind('.')]
if repository.addExportSuffix.value:
suffixFileName += '_export'
suffixFileName += '.' + repository.fileExtension.value
gcodeText = gcodec.getGcodeFileText(fileName, '')
procedures = skeinforge_craft.getProcedures('export', gcodeText)
gcodeText = skeinforge_craft.getChainTextFromProcedures(fileName, procedures[ : - 1 ], gcodeText)
if gcodeText == '':
return
window = skeinforge_analyze.writeOutput(fileName, suffixFileName, gcodeText)
if repository.savePenultimateGcode.value:
penultimateFileName = fileName[: fileName.rfind('.')] + '_penultimate.gcode'
archive.writeFileText(penultimateFileName, gcodeText)
print('The penultimate file is saved as ' + archive.getSummarizedFileName(penultimateFileName))
exportChainGcode = getCraftedTextFromText(gcodeText, repository)
replaceableExportChainGcode = None
selectedPluginModule = getSelectedPluginModule(repository.exportPlugins)
if selectedPluginModule == None:
replaceableExportChainGcode = exportChainGcode
else:
if selectedPluginModule.globalIsReplaceable:
replaceableExportChainGcode = selectedPluginModule.getOutput(exportChainGcode)
else:
selectedPluginModule.writeOutput(suffixFileName, exportChainGcode)
if replaceableExportChainGcode != None:
replaceableExportChainGcode = getReplaced(replaceableExportChainGcode)
archive.writeFileText( suffixFileName, replaceableExportChainGcode )
print('The exported file is saved as ' + archive.getSummarizedFileName(suffixFileName))
if repository.alsoSendOutputTo.value != '':
if replaceableExportChainGcode == None:
replaceableExportChainGcode = selectedPluginModule.getOutput(exportChainGcode)
exec('print >> ' + repository.alsoSendOutputTo.value + ', replaceableExportChainGcode')
print('It took %s to export the file.' % euclidean.getDurationString(time.time() - startTime))
return window
def writeOutput(fileName=''): 'Cool a gcode linear move file. Chain cool the gcode if it is not already cooled.' fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName != '': skeinforge_craft.writeChainTextWithNounMessage(fileName, 'cool')
def writeOutput(fileName=''): "Mill a gcode linear move file." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName == '': return skeinforge_craft.writeChainTextWithNounMessage( fileName, 'mill')
def writeOutput(fileName=""):
"Speed a gcode linear move file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName)
if fileName != "":
skeinforge_craft.writeChainTextWithNounMessage(fileName, "speed")
def writeOutput(fileName=''):
"Fillet a gcode linear move file. Depending on the settings, either arcPoint, arcRadius, arcSegment, bevel or do nothing."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName != '':
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'fillet')
def writeOutput( fileName = ''): "Alternate shell file." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName == '': return skeinforge_craft.writeChainTextWithNounMessage( fileName, 'altshell')
def writeOutput(fileName=''): 'Limit a gcode file.' fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName != '': skeinforge_craft.writeChainTextWithNounMessage( fileName, 'limit')
def writeOutput(fileName=''):
"Hop a gcode linear move file. Chain hop the gcode if it is not already hopped. If no fileName is specified, hop the first unmodified gcode file in this folder."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName != '':
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'hop')
def writeOutput(fileName=''): "Home a gcode linear move file. Chain home the gcode if it is not already homed. If no fileName is specified, home the first unmodified gcode file in this folder." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName != '': skeinforge_craft.writeChainTextWithNounMessage( fileName, 'home')
def writeOutput(fileName=''): "Oozebane a gcode linear move file." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName != '': skeinforge_craft.writeChainTextWithNounMessage( fileName, 'oozebane')
def writeOutput( fileName = '' ): "Dimension a gcode file." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified( fileName ) if fileName != '': skeinforge_craft.writeChainTextWithNounMessage( fileName, 'dimension' )
def writeOutput( self, fileName = ''): "Fillet a gcode linear move file. Depending on the settings, either arcPoint, arcRadius, arcSegment, bevel or do nothing." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName != '': skeinforge_craft.writeChainTextWithNounMessage( fileName, 'fillet')
def writeOutput(fileName=''):
"Dimension a gcode file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName != '':
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'dimension')
def writeOutput(fileName=''): "Inset the carving of a gcode file." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName != '': skeinforge_craft.writeChainTextWithNounMessage( fileName, 'inset')
def writeOutput( self, fileName = ''): "Whittle the carving of a gcode file. If no fileName is specified, whittle the first unmodified gcode file in this folder." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName == '': return skeinforge_craft.writeChainTextWithNounMessage( fileName, 'whittle')
def writeOutput(fileName=''):
"Unpause a gcode linear move file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName != '':
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'unpause')
def writeOutput(fileName=''): "Outset the carving of a gcode file. If no fileName is specified, outset the first unmodified gcode file in this folder." fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(fileName) if fileName != '': skeinforge_craft.writeChainTextWithNounMessage( fileName, 'outset')
def writeOutput(fileName=''):
"Lift the carving of a gcode file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName != '':
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'lift')
def writeOutput(fileName=''):
'Cool a gcode linear move file. Chain cool the gcode if it is not already cooled.'
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName != '':
skeinforge_craft.writeChainTextWithNounMessage(fileName, 'cool')