def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the bottom svgText."
svgReader = SVGReader()
svgReader.parseSVG('', svgText)
if svgReader.sliceDictionary == None:
print(
'Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.'
)
return ''
decimalPlacesCarried = int(
svgReader.sliceDictionary['decimalPlacesCarried'])
layerThickness = float(svgReader.sliceDictionary['layerThickness'])
perimeterWidth = float(svgReader.sliceDictionary['perimeterWidth'])
loopLayers = svgReader.loopLayers
zMinimum = 987654321.0
for loopLayer in loopLayers:
zMinimum = min(loopLayer.z, zMinimum)
deltaZ = repository.altitude.value + repository.additionalHeightOverLayerThickness.value * layerThickness - zMinimum
for loopLayer in loopLayers:
loopLayer.z += deltaZ
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum,
layerThickness, loopLayers)
svgWriter = svg_writer.SVGWriter(True, cornerMaximum, cornerMinimum,
decimalPlacesCarried, layerThickness,
perimeterWidth)
commentElement = svg_writer.getCommentElement(
svgReader.documentElement)
procedureNameString = svgReader.sliceDictionary[
'procedureName'] + ',bottom'
return svgWriter.getReplacedSVGTemplate(fileName, loopLayers,
procedureNameString,
commentElement)
def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the scale svgText."
svgReader = SVGReader()
svgReader.parseSVG('', svgText)
if svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
xyPlaneScale = repository.xyPlaneScale.value
zAxisScale = repository.zAxisScale.value
decimalPlacesCarried = int(svgReader.sliceDictionary['decimalPlacesCarried'])
layerHeight = zAxisScale * float(svgReader.sliceDictionary['layerHeight'])
edgeWidth = float(svgReader.sliceDictionary['edgeWidth'])
loopLayers = svgReader.loopLayers
for loopLayer in loopLayers:
setLoopLayerScale(loopLayer, xyPlaneScale, zAxisScale)
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum, layerHeight, loopLayers)
svgWriter = svg_writer.SVGWriter(
True,
cornerMaximum,
cornerMinimum,
decimalPlacesCarried,
layerHeight,
edgeWidth)
commentElement = svg_writer.getCommentElement(svgReader.documentElement)
procedureNameString = svgReader.sliceDictionary['procedureName'] + ',scale'
return svgWriter.getReplacedSVGTemplate(fileName, loopLayers, procedureNameString, commentElement)
def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the scale svgText."
svgReader = SVGReader()
svgReader.parseSVG('', svgText)
if svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
xyPlaneScale = repository.xyPlaneScale.value
zAxisScale = repository.zAxisScale.value
decimalPlacesCarried = int(svgReader.sliceDictionary['decimalPlacesCarried'])
layerHeight = zAxisScale * float(svgReader.sliceDictionary['layerHeight'])
edgeWidth = float(svgReader.sliceDictionary['edgeWidth'])
loopLayers = svgReader.loopLayers
for loopLayer in loopLayers:
setLoopLayerScale(loopLayer, xyPlaneScale, zAxisScale)
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum, layerHeight, loopLayers)
svgWriter = svg_writer.SVGWriter(
True,
cornerMaximum,
cornerMinimum,
decimalPlacesCarried,
layerHeight,
edgeWidth)
commentElement = svg_writer.getCommentElement(svgReader.documentElement)
procedureNameString = svgReader.sliceDictionary['procedureName'] + ',scale'
return svgWriter.getReplacedSVGTemplate(fileName, loopLayers, procedureNameString, commentElement)
def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the bottom svgText."
svgReader = SVGReader()
svgReader.parseSVG('', svgText)
if svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
decimalPlacesCarried = int(svgReader.sliceDictionary['decimalPlacesCarried'])
layerThickness = float(svgReader.sliceDictionary['layerThickness'])
perimeterWidth = float(svgReader.sliceDictionary['perimeterWidth'])
rotatedLoopLayers = svgReader.rotatedLoopLayers
zMinimum = 987654321.0
for rotatedLoopLayer in rotatedLoopLayers:
zMinimum = min(rotatedLoopLayer.z, zMinimum)
deltaZ = repository.altitude.value + repository.additionalHeightOverLayerThickness.value * layerThickness - zMinimum
for rotatedLoopLayer in rotatedLoopLayers:
rotatedLoopLayer.z += deltaZ
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum, layerThickness, rotatedLoopLayers)
svgWriter = svg_writer.SVGWriter(
True,
cornerMaximum,
cornerMinimum,
decimalPlacesCarried,
layerThickness,
perimeterWidth)
commentElement = svg_writer.getCommentElement(svgReader.root)
procedureNameString = svgReader.sliceDictionary['procedureName'] + ',bottom'
return svgWriter.getReplacedSVGTemplate(fileName, procedureNameString, rotatedLoopLayers, commentElement)
def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the bottom svgText."
svgReader = SVGReader()
svgReader.parseSVG("", svgText)
if svgReader.sliceDictionary == None:
print(
"Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface."
)
return ""
decimalPlacesCarried = int(svgReader.sliceDictionary["decimalPlacesCarried"])
edgeWidth = float(svgReader.sliceDictionary["edgeWidth"])
layerHeight = float(svgReader.sliceDictionary["layerHeight"])
loopLayers = svgReader.loopLayers
zMinimum = 987654321.0
for loopLayer in loopLayers:
zMinimum = min(loopLayer.z, zMinimum)
deltaZ = (
repository.altitude.value + repository.additionalHeightOverLayerThickness.value * layerHeight - zMinimum
)
for loopLayer in loopLayers:
loopLayer.z += deltaZ
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum, layerHeight, loopLayers)
svgWriter = svg_writer.SVGWriter(
True, cornerMaximum, cornerMinimum, decimalPlacesCarried, layerHeight, edgeWidth
)
commentElement = svg_writer.getCommentElement(svgReader.documentElement)
procedureNameString = svgReader.sliceDictionary["procedureName"] + ",bottom"
return svgWriter.getReplacedSVGTemplate(fileName, loopLayers, procedureNameString, commentElement)
def parseSVG( self, fileName, svgText ): "Parse SVG text and store the layers." if svgText == '': return self.fileName = fileName self.svgReader.parseSVG(fileName, svgText) self.parseInitialization() self.cornerMaximum = Vector3(-999999999.0, -999999999.0, self.maximumZ) self.cornerMinimum = Vector3(999999999.0, 999999999.0, self.minimumZ) svg_writer.setSVGCarvingCorners(self.svgReader.rotatedLoopLayers, self)
def parseSVG(self, fileName, svgText):
"Parse SVG text and store the layers."
if svgText == '':
return
self.fileName = fileName
self.svgReader.parseSVG(fileName, svgText)
self.parseInitialization()
self.cornerMaximum = Vector3(-999999999.0, -999999999.0, self.maximumZ)
self.cornerMinimum = Vector3(999999999.0, 999999999.0, self.minimumZ)
svg_writer.setSVGCarvingCorners(self.svgReader.rotatedLoopLayers, self)
def parseSVG(self, fileName, svgText): 'Parse SVG text and store the layers.' if svgText == '': return self.fileName = fileName self.svgReader.parseSVG(fileName, svgText) self.layerHeight = euclidean.getFloatDefaultByDictionary( self.layerHeight, self.svgReader.sliceDictionary, 'layerHeight') self.cornerMaximum = Vector3(-987654321.0, -987654321.0, self.maximumZ) self.cornerMinimum = Vector3(987654321.0, 987654321.0, self.minimumZ) svg_writer.setSVGCarvingCorners( self.cornerMaximum, self.cornerMinimum, self.layerHeight, self.svgReader.loopLayers)
def parseSVG(self, fileName, svgText): 'Parse SVG text and store the layers.' if svgText == '': return self.fileName = fileName self.svgReader.parseSVG(fileName, svgText) self.layerThickness = euclidean.getFloatDefaultByDictionary( self.layerThickness, self.svgReader.sliceDictionary, 'layerThickness') self.cornerMaximum = Vector3(-999999999.0, -999999999.0, self.maximumZ) self.cornerMinimum = Vector3(999999999.0, 999999999.0, self.minimumZ) svg_writer.setSVGCarvingCorners( self.cornerMaximum, self.cornerMinimum, self.layerThickness, self.svgReader.rotatedLoopLayers)
def parseSVG(self, fileName, svgText):
'Parse SVG text and store the layers.'
if svgText == '':
return
self.fileName = fileName
self.svgReader.parseSVG(fileName, svgText)
self.layerHeight = euclidean.getFloatDefaultByDictionary(
self.layerHeight, self.svgReader.sliceDictionary, 'layerHeight')
self.cornerMaximum = Vector3(-987654321.0, -987654321.0, self.maximumZ)
self.cornerMinimum = Vector3(987654321.0, 987654321.0, self.minimumZ)
svg_writer.setSVGCarvingCorners(self.cornerMaximum, self.cornerMinimum,
self.layerHeight,
self.svgReader.loopLayers)
def processSVGElement(self, fileName): "Parse SVG element and store the layers." self.fileName = fileName paths = self.xmlElement.object.getPaths() if len(paths) < 1: return firstPath = paths[0] if len(firstPath) < 1: return rotatedLoopLayer = euclidean.RotatedLoopLayer(firstPath[0].z) self.rotatedLoopLayers.append(rotatedLoopLayer) for path in paths: rotatedLoopLayer.loops.append(euclidean.getComplexPath(path)) self.cornerMaximum = Vector3(-999999999.0, -999999999.0, -999999999.0) self.cornerMinimum = Vector3(999999999.0, 999999999.0, 999999999.0) svg_writer.setSVGCarvingCorners(self.cornerMaximum, self.cornerMinimum, self.layerThickness, self.rotatedLoopLayers)
def processSVGElement(self, fileName): 'Parse SVG element and store the layers.' self.fileName = fileName paths = self.xmlElement.object.getPaths() if len(paths) < 1: return firstPath = paths[0] if len(firstPath) < 1: return rotatedLoopLayer = euclidean.RotatedLoopLayer(firstPath[0].z) self.rotatedLoopLayers.append(rotatedLoopLayer) for path in paths: rotatedLoopLayer.loops.append(euclidean.getComplexPath(path)) self.cornerMaximum = Vector3(-999999999.0, -999999999.0, -999999999.0) self.cornerMinimum = Vector3(999999999.0, 999999999.0, 999999999.0) svg_writer.setSVGCarvingCorners(self.cornerMaximum, self.cornerMinimum, self.layerThickness, self.rotatedLoopLayers)
def processSVGElement(self, fileName): 'Parse SVG element and store the layers.' self.fileName = fileName paths = self.elementNode.xmlObject.getPaths() oldZ = None self.loopLayers = [] loopLayer = None for path in paths: if len(path) > 0: z = path[0].z if z != oldZ: loopLayer = euclidean.LoopLayer(z) self.loopLayers.append(loopLayer) oldZ = z loopLayer.loops.append(euclidean.getComplexPath(path)) if len(self.loopLayers) < 1: return self.cornerMaximum = Vector3(-987654321.0, -987654321.0, -987654321.0) self.cornerMinimum = Vector3(987654321.0, 987654321.0, 987654321.0) svg_writer.setSVGCarvingCorners(self.cornerMaximum, self.cornerMinimum, self.layerThickness, self.loopLayers)
def processSVGElement(self, fileName): 'Parse SVG element and store the layers.' self.fileName = fileName paths = self.elementNode.xmlObject.getPaths() oldZ = None self.loopLayers = [] loopLayer = None for path in paths: if len(path) > 0: z = path[0].z if z != oldZ: loopLayer = euclidean.LoopLayer(z) self.loopLayers.append(loopLayer) oldZ = z loopLayer.loops.append(euclidean.getComplexPath(path)) if len(self.loopLayers) < 1: return self.cornerMaximum = Vector3(-987654321.0, -987654321.0, -987654321.0) self.cornerMinimum = Vector3(987654321.0, 987654321.0, 987654321.0) svg_writer.setSVGCarvingCorners(self.cornerMaximum, self.cornerMinimum, self.layerThickness, self.loopLayers)
def processSVGElement(self, fileName): """Parse SVG element and store the layers.""" self.fileName = fileName paths = self.xmlElement.xmlObject.getPaths() oldZ = None self.rotatedLoopLayers = [] rotatedLoopLayer = None for path in paths: if len(path) > 0: z = path[0].z if z != oldZ: rotatedLoopLayer = euclidean.RotatedLoopLayer(z) self.rotatedLoopLayers.append(rotatedLoopLayer) oldZ = z rotatedLoopLayer.loops.append(euclidean.getComplexPath(path)) if len(self.rotatedLoopLayers) < 1: return self.cornerMaximum = Vector3(-987654321.0, -987654321.0, -987654321.0) self.cornerMinimum = Vector3(987654321.0, 987654321.0, 987654321.0) svg_writer.setSVGCarvingCorners(self.cornerMaximum, self.cornerMinimum, self.extrusionHeight, self.rotatedLoopLayers)
