def testConfigCorrectInput():
# examples of command line options - all correct
# --copyjobfile and -f are the same options
inputOptions = \
"""-r /tmp/report --copyjobfile=/tmp/batchfile -d DEBUG -t 3
-r /tmp/report -f /tmp/batchfile -d DEBUG -t 3
fdt://host1:123/tmp/file fdt://host2:124//tmp/file1 -d DEBUG -t 3
-r /tmp/report fdt://host1:123/tmp/file fdt://host2:123/tmp/file1 -d DEBUG -t 3"""
for i in inputOptions.split('\n'):
ops = i.strip()
print("command line options: %s" % ops)
conf = ConfigFDTCopy(ops.split())
conf.sanitize()
def testConfigCorrectInput():
# examples of command line options - all correct
# --copyjobfile and -f are the same options
inputOptions = \
"""-r /tmp/report --copyjobfile=/tmp/batchfile -d DEBUG -t 3
-r /tmp/report -f /tmp/batchfile -d DEBUG -t 3
fdt://host1:123/tmp/file fdt://host2:124//tmp/file1 -d DEBUG -t 3
-r /tmp/report fdt://host1:123/tmp/file fdt://host2:123/tmp/file1 -d DEBUG -t 3"""
for i in inputOptions.split('\n'):
ops = i.strip()
print("command line options: %s" % ops)
conf = ConfigFDTCopy(ops.split())
conf.sanitize()
def testTransfersCopyJobFileWrongFormat():
# blank lines (triple quotes not directly in front of the first line
# should also cause exception being raised
# non-numeric port numbers
data = """
fdt://host1:123/tmp/file host5:123/tmp/fileX1
fdt://host2:123234/tmp/file1
fdt://host2:14124/tmp/file3 host6:124/tmp/fileX
fdt://host2:14124c/tmp/file3 host6:124c/tmp/fileX
fdt://host2:14124/tmp/file3 fdt://host6:124c/tmp/fileX
fdt://host2:14124x/tmp/file3 fdt://host6:124/tmp/fileX
- -
"""
logger = Logger("test logger", level=logging.DEBUG)
for line in data.split('\n'):
copyJobFile = tempfile.NamedTemporaryFile("w+") # read / write
print("copyjobfile contains: '%s'" % line)
copyJobFile.write(line)
copyJobFile.flush()
copyJobFile.seek(0)
inputOption = "--copyjobfile=%s" % copyJobFile.name
conf = ConfigFDTCopy(inputOption.split())
apMon = None
py.test.raises(FDTCopyException, Transfers, conf, apMon, logger)
def testTransfersCopyJobFile():
# correct data
data = \
"""fdt://host1:111/tmp/file fdt://host5:222//tmp/fileX1
fdt://host2:555/tmp/fileGY fdt://host5:444/tmp/fileX2
fdt://host2:555/tmp/fileWA fdt://host5:444/tmp/fileX
fdt://host3:777/tmp/fileWQ fdt://host7:888/tmp/fileTY
fdt://host4:999/tmp/file9Y fdt://host8:1212/tmp/fileIO"""
logger = Logger("test logger", level=logging.DEBUG)
copyJobFile = tempfile.NamedTemporaryFile("w+") # read / write
copyJobFile.write(data)
copyJobFile.flush()
copyJobFile.seek(0)
inputOption = "--copyjobfile=%s" % copyJobFile.name
conf = ConfigFDTCopy(inputOption.split())
apMon = None
transfers = Transfers(conf, apMon, logger)
assert len(transfers.transfers) == 4
assert len(transfers.transfers["host1:111-host5:222"].files) == 1
assert len(transfers.transfers["host2:555-host5:444"].files) == 2
assert len(transfers.transfers["host3:777-host7:888"].files) == 1
assert len(transfers.transfers["host4:999-host8:1212"].files) == 1
# correct port numbers are tested as part of key to transfers.transfer
assert transfers.transfers["host1:111-host5:222"].hostSrc == "host1"
assert transfers.transfers["host1:111-host5:222"].hostDest == "host5"
assert transfers.transfers["host1:111-host5:222"].files[0].fileSrc == \
"/tmp/file"
assert transfers.transfers["host1:111-host5:222"].files[0].fileDest == \
"/tmp/fileX1"
assert transfers.transfers["host2:555-host5:444"].hostSrc == "host2"
assert transfers.transfers["host2:555-host5:444"].hostDest == "host5"
assert transfers.transfers["host2:555-host5:444"].files[0].fileSrc == \
"/tmp/fileGY"
assert transfers.transfers["host2:555-host5:444"].files[0].fileDest == \
"/tmp/fileX2"
assert transfers.transfers["host2:555-host5:444"].files[1].fileSrc == \
"/tmp/fileWA"
assert transfers.transfers["host2:555-host5:444"].files[1].fileDest == \
"/tmp/fileX"
assert transfers.transfers["host3:777-host7:888"].hostSrc == "host3"
assert transfers.transfers["host3:777-host7:888"].hostDest == "host7"
assert transfers.transfers["host3:777-host7:888"].files[0].fileSrc == \
"/tmp/fileWQ"
assert transfers.transfers["host3:777-host7:888"].files[0].fileDest == \
"/tmp/fileTY"
assert transfers.transfers["host4:999-host8:1212"].hostSrc == "host4"
assert transfers.transfers["host4:999-host8:1212"].hostDest == "host8"
assert transfers.transfers["host4:999-host8:1212"].files[0].fileSrc == \
"/tmp/file9Y"
assert transfers.transfers["host4:999-host8:1212"].files[0].fileDest == \
"/tmp/fileIO"
def testConfigRetrievingValues():
inputOptions = "-f /tmp/batchfile"
conf = ConfigFDTCopy(inputOptions.split())
assert conf.get("report") == None
inputOptions = "-r /tmp/report -f /tmp/batchfile"
conf = ConfigFDTCopy(inputOptions.split())
assert conf.get("nonsense") == None
assert conf.get("report") == "/tmp/report"
assert conf.get("copyjobfile") == "/tmp/batchfile"
inputOptions = "-r /tmp/report -f /tmp/batchfile --config /tmp/configfile"
# config file does not exist - will raise exception
py.test.raises(ConfigurationException, ConfigFDTCopy, inputOptions.split())
inputOptions = "fdt://host1:123:/file1 fdt://host2:124/file2"
conf = ConfigFDTCopy(inputOptions.split())
assert conf.get("nonsense") == None
assert conf.get("urlSrc") == "fdt://host1:123:/file1"
assert conf.get("urlDest") == "fdt://host2:124/file2"
def testAuthClientAction():
c = \
"""
[general]
authClientCommand = bash authenticator/wrapper_auth.sh -p %(port)s -h %(host)s -u %(fileNameToStoreRemoteUserName)s
"""
f = getTempFile(c)
inputOption = "--config=%s host1:/tmp/file host2:/tmp/file1" % f.name
conf = ConfigFDTCopy(inputOption.split())
a = AuthClientAction("some_id", dict(port="someport", host="somehost"))
fileNameToStoreRemoteUserName = ("/tmp/" + a.id + "--" +
getRandomString('a', 'z', 5))
a._setUp(conf, fileNameToStoreRemoteUserName)
assert a.options["port"] == "someport"
c = ("bash authenticator/wrapper_auth.sh -p someport -h somehost "
"-u %s" % fileNameToStoreRemoteUserName)
assert a.command == c
def testTransfersGeneral():
logger = Logger("test logger", level=logging.DEBUG)
conf = ConfigFDTCopy("-r /tmp/report fdt://host1:123/tmp/file "
"fdt://host2:12355/tmp/file1".split())
apMon = None
transfers = Transfers(conf, apMon, logger)
assert len(transfers.transfers) == 1
assert len(transfers.transfers["host1:123-host2:12355"].files) == 1
assert transfers.transfers["host1:123-host2:12355"].hostSrc == "host1"
assert transfers.transfers["host1:123-host2:12355"].portSrc == "123"
assert transfers.transfers["host1:123-host2:12355"].files[0].fileSrc == \
"/tmp/file"
assert transfers.transfers["host1:123-host2:12355"].hostDest == "host2"
assert transfers.transfers["host1:123-host2:12355"].portDest == "12355"
assert transfers.transfers["host1:123-host2:12355"].files[0].fileDest == \
"/tmp/file1"
assert transfers.transfers["host1:123-host2:12355"].result == 1
def testConfigFDTCopyCorrectValues():
c = """
[general]
timeout = 5
debug = DEBUG
"""
f = getTempFile(c)
inputOption = "--copyjobfile=/tmp/something --report=/tmp/something2 --log=/tmp/something3 --config=%s" % f.name
conf = ConfigFDTCopy(inputOption.split())
conf.sanitize()
assert conf.get("copyjobfile") == "/tmp/something"
assert conf.get("report") == "/tmp/something2"
assert conf.get("logFile") == "/tmp/something3"
def testTransfer():
# correct data
data = \
"""fdt://localhost1:111/tmp/file fdt://localhost5:444/tmp/fileX1
fdt://localhost2:111/tmp/fileGY fdt://localhost5:444/tmp/fileX2
fdt://localhost2:111/tmp/fileWA fdt://localhost5:444/tmp/fileX
fdt://localhost3:111/tmp/fileWQ fdt://localhost7:444/tmp/fileTY
fdt://localhost4:111/tmp/file9Y fdt://localhost8:444/tmp/fileIO"""
logger = Logger("test logger", level=logging.DEBUG)
copyJobFile = tempfile.NamedTemporaryFile("w+") # read / write
copyJobFile.write(data)
copyJobFile.flush()
copyJobFile.seek(0)
inputOption = "--copyjobfile=%s" % copyJobFile.name
conf = ConfigFDTCopy(inputOption.split())
# transfers actually fail with could not connect to remote PYRO
# wrong hosts - no Transfer instances will be setUp()
apMon = None
transfers = Transfers(conf, apMon, logger)
def testTransferGeneral():
logger = Logger("test logger", level=logging.DEBUG)
conf = ConfigFDTCopy("-r /tmp/report fdt://host1:123/tmp/file "
"fdt://host2:123/tmp/file1".split())
apMon = None
transfer = Transfer(conf, apMon, logger)
def testConfigRetrievingValues():
inputOptions = "-f /tmp/batchfile"
conf = ConfigFDTCopy(inputOptions.split())
assert conf.get("report") == None
inputOptions = "-r /tmp/report -f /tmp/batchfile"
conf = ConfigFDTCopy(inputOptions.split())
assert conf.get("nonsense") == None
assert conf.get("report") == "/tmp/report"
assert conf.get("copyjobfile") == "/tmp/batchfile"
inputOptions = ("-r /tmp/report -f /tmp/batchfile "
"--config /tmp/configfile")
# config file does not exist - will raise exception
py.test.raises(ConfigurationException, ConfigFDTCopy, inputOptions.split())
inputOptions = "fdt://host1:123:/file1 fdt://host2:124/file2"
conf = ConfigFDTCopy(inputOptions.split())
assert conf.get("nonsense") == None
assert conf.get("urlSrc") == "fdt://host1:123:/file1"
assert conf.get("urlDest") == "fdt://host2:124/file2"
def testInputCopyJobFileTranslationIntoFDTFileList():
# correct data - input copyjobfile - all must be the same source host,
# destination host pairs, otherwise such input copyjobfile will break
# into a number of FDT fileList files on corresponding source hosts
inputData = \
"""fdt://localhost:111/tmp/file fdt://localhost:222/tmp/fileX1
fdt://localhost:111/tmp/fileGY fdt://localhost:222/tmp/fileX2
fdt://localhost:111/tmp/fileWA fdt://localhost:222/tmp/fileX
fdt://localhost:111/tmp/fileWQ fdt://localhost:222/tmp/fileTY
fdt://localhost:111/tmp/file9Y fdt://localhost:222/tmp/fileIO"""
# desired output fileList for FDT client
outputData = \
"""/tmp/file / /tmp/fileX1
/tmp/fileGY / /tmp/fileX2
/tmp/fileWA / /tmp/fileX
/tmp/fileWQ / /tmp/fileTY
/tmp/file9Y / /tmp/fileIO"""
logger = Logger("test logger", level=logging.DEBUG)
copyJobFile = tempfile.NamedTemporaryFile("w+") # read / write
copyJobFile.write(inputData)
copyJobFile.flush()
copyJobFile.seek(0)
inputOption = "--copyjobfile=%s" % copyJobFile.name
conf = ConfigFDTCopy(inputOption.split())
apMon = None
transfers = Transfers(conf, apMon, logger)
# since having the same source host, destination host pair, should have
# only one transfer job
t = transfers.transfers["localhost:111-localhost:222"]
assert len(transfers.transfers) == 1
assert len(t.files) == 5
# do relevant stuff from fdtcp performTransfer method now
testAction = TestAction(t.hostSrc, t.hostDest, timeout=5)
t.id = testAction.id
options = dict(port="some_port",
hostDest=t.hostDest,
transferFiles=t.files)
sndClientAction = SendingClientAction(testAction.id, options)
assert sndClientAction.options["port"] == "some_port"
assert sndClientAction.options["hostDest"] == t.hostDest
# fileList is constructed at the side of fdtd service (remote site)
# simulate this process ...
class MockFDTDConfig(Mock):
# mock class only to satisfy sndClientAction._setUp() call - when
# it checks for log file
def get(self, what):
return "/tmp/logfile"
# this method is called on fdtd service site
sndClientAction._setUp(MockFDTDConfig())
assert sndClientAction.options["fileList"] == \
"/tmp/fileLists/fdt-fileList-%s" % sndClientAction.id
# now check content of the fileList file - shall be as the output data
data = open(sndClientAction.options["fileList"], 'r').readlines()
for line1, line2 in zip(data, outputData.split('\n')):
assert line1.strip() == line2
# clean up after test, only if succeeded
os.unlink(sndClientAction.options["fileList"])
def testTransfersCopyJobFileNonExisting():
logger = Logger("test logger", level=logging.DEBUG)
inputOption = "--copyjobfile=/tmp/nonexistingfile"
conf = ConfigFDTCopy(inputOption.split())
apMon = None
py.test.raises(FDTCopyException, Transfers, conf, apMon, logger)