class Scheduler(threading.Thread):
__custom_setting__ = {}
def __init__(
self,
redis_key=None,
thread_count=None,
begin_callback=None,
end_callback=None,
delete_keys=(),
auto_stop_when_spider_done=None,
auto_start_requests=None,
send_run_time=True,
batch_interval=0,
wait_lock=True,
task_table=None,
):
"""
@summary: 调度器
---------
@param redis_key: 爬虫request及item存放reis中的文件夹
@param thread_count: 线程数，默认为配置文件中的线程数
@param begin_callback: 爬虫开始回调函数
@param end_callback: 爬虫结束回调函数
@param delete_keys: 爬虫启动时删除的key，类型: 元组/bool/string。 支持正则
@param auto_stop_when_spider_done: 爬虫抓取完毕后是否自动结束或等待任务，默认自动结束
@param auto_start_requests: 爬虫是否自动添加任务
@param send_run_time: 发送运行时间
@param batch_interval: 抓取时间间隔 默认为0 天为单位 多次启动时，只有当前时间与第一次抓取结束的时间间隔大于指定的时间间隔时，爬虫才启动
@param wait_lock: 下发任务时否等待锁，若不等待锁，可能会存在多进程同时在下发一样的任务，因此分布式环境下请将该值设置True
@param task_table: 任务表， 批次爬虫传递
---------
@result:
"""
super(Scheduler, self).__init__()
for key, value in self.__class__.__custom_setting__.items():
setattr(setting, key, value)
log.reload()
self._redis_key = redis_key or setting.REDIS_KEY
if not self._redis_key:
raise Exception(
"""
redis_key 为redis中存放request与item的目录。不能为空，
可在setting中配置，如 REDIS_KEY = 'test'
或spider初始化时传参, 如 TestSpider(redis_key='test')
"""
)
self._request_buffer = RequestBuffer(redis_key)
self._item_buffer = ItemBuffer(redis_key, task_table)
self._collector = Collector(redis_key)
self._parsers = []
self._parser_controls = []
self._parser_control_obj = PaserControl
self._auto_stop_when_spider_done = (
auto_stop_when_spider_done
if auto_stop_when_spider_done is not None
else setting.AUTO_STOP_WHEN_SPIDER_DONE
)
self._auto_start_requests = (
auto_start_requests
if auto_start_requests is not None
else setting.SPIDER_AUTO_START_REQUESTS
)
self._send_run_time = send_run_time
self._batch_interval = batch_interval
self._begin_callback = (
begin_callback
if begin_callback
else lambda: log.info("\n********** feapder begin **********")
)
self._end_callback = (
end_callback
if end_callback
else lambda: log.info("\n********** feapder end **********")
)
self._thread_count = (
setting.SPIDER_THREAD_COUNT if not thread_count else thread_count
)
self._spider_name = redis_key
self._project_name = redis_key.split(":")[0]
self._tab_spider_time = setting.TAB_SPIDER_TIME.format(redis_key=redis_key)
self._tab_spider_status = setting.TAB_SPIDER_STATUS.format(redis_key=redis_key)
self._tab_requests = setting.TAB_REQUSETS.format(redis_key=redis_key)
self._tab_failed_requests = setting.TAB_FAILED_REQUSETS.format(
redis_key=redis_key
)
self._is_notify_end = False # 是否已经通知结束
self._last_task_count = 0 # 最近一次任务数量
self._redisdb = RedisDB()
self._project_total_state_table = "{}_total_state".format(self._project_name)
self._is_exist_project_total_state_table = False
# Request 缓存设置
Request.cached_redis_key = redis_key
Request.cached_expire_time = setting.RESPONSE_CACHED_EXPIRE_TIME
delete_keys = delete_keys or setting.DELETE_KEYS
if delete_keys:
self.delete_tables(delete_keys)
self._last_check_task_status_time = 0
self.wait_lock = wait_lock
def add_parser(self, parser):
parser = parser() # parser 实例化
if isinstance(parser, BaseParser):
self._parsers.append(parser)
else:
raise ValueError("类型错误，爬虫需继承feapder.BaseParser或feapder.BatchParser")
def run(self):
if not self.is_reach_next_spider_time():
return
self._start()
while True:
if self.all_thread_is_done():
if not self._is_notify_end:
self.spider_end() # 跑完一轮
self.record_spider_state(
spider_type=1,
state=1,
spider_end_time=tools.get_current_date(),
batch_interval=self._batch_interval,
)
self._is_notify_end = True
if self._auto_stop_when_spider_done:
self._stop_all_thread()
break
else:
self._is_notify_end = False
self.check_task_status()
tools.delay_time(1) # 1秒钟检查一次爬虫状态
def __add_task(self):
# 启动parser 的 start_requests
self.spider_begin() # 不自动结束的爬虫此处只能执行一遍
self.record_spider_state(
spider_type=1,
state=0,
batch_date=tools.get_current_date(),
spider_start_time=tools.get_current_date(),
batch_interval=self._batch_interval,
)
# 判断任务池中属否还有任务，若有接着抓取
todo_task_count = self._collector.get_requests_count()
if todo_task_count:
log.info("检查到有待做任务 %s 条，不重下发新任务。将接着上回异常终止处继续抓取" % todo_task_count)
else:
for parser in self._parsers:
results = parser.start_requests()
# 添加request到请求队列，由请求队列统一入库
if results and not isinstance(results, Iterable):
raise Exception("%s.%s返回值必须可迭代" % (parser.name, "start_requests"))
result_type = 1
for result in results or []:
if isinstance(result, Request):
result.parser_name = result.parser_name or parser.name
self._request_buffer.put_request(result)
result_type = 1
elif isinstance(result, Item):
self._item_buffer.put_item(result)
result_type = 2
elif callable(result): # callbale的request可能是更新数据库操作的函数
if result_type == 1:
self._request_buffer.put_request(result)
else:
self._item_buffer.put_item(result)
else:
raise TypeError(
"start_requests yield result type error, expect Request、Item、callback func, bug get type: {}".format(
type(result)
)
)
self._request_buffer.flush()
self._item_buffer.flush()
def _start(self):
# 启动request_buffer
self._request_buffer.start()
# 启动item_buffer
self._item_buffer.start()
# 启动collector
self._collector.start()
# 启动parser control
for i in range(self._thread_count):
parser_control = self._parser_control_obj(
self._collector,
self._redis_key,
self._request_buffer,
self._item_buffer,
)
for parser in self._parsers:
parser_control.add_parser(parser)
parser_control.start()
self._parser_controls.append(parser_control)
# 下发任务 因为时间可能比较长，放到最后面
if setting.RETRY_FAILED_REQUESTS:
# 重设失败的任务, 不用加锁，原子性操作
handle_failed_requests = HandleFailedRequests(self._redis_key)
handle_failed_requests.reput_failed_requests_to_requests()
# 下发新任务
if self._auto_start_requests: # 自动下发
if self.wait_lock:
# 将添加任务处加锁，防止多进程之间添加重复的任务
with RedisLock(
key=self._spider_name,
timeout=3600,
wait_timeout=60,
redis_cli=RedisDB().get_redis_obj(),
) as lock:
if lock.locked:
self.__add_task()
else:
self.__add_task()
def all_thread_is_done(self):
for i in range(3): # 降低偶然性, 因为各个环节不是并发的，很有可能当时状态为假，但检测下一条时该状态为真。一次检测很有可能遇到这种偶然性
# 检测 collector 状态
if (
self._collector.is_collector_task()
or self._collector.get_requests_count() > 0
):
return False
# 检测 parser_control 状态
for parser_control in self._parser_controls:
if not parser_control.is_not_task():
return False
# 检测 item_buffer 状态
if (
self._item_buffer.get_items_count() > 0
or self._item_buffer.is_adding_to_db()
):
return False
# 检测 request_buffer 状态
if (
self._request_buffer.get_requests_count() > 0
or self._request_buffer.is_adding_to_db()
):
return False
tools.delay_time(1)
return True
@tools.run_safe_model("check_task_status")
def check_task_status(self):
"""
检查任务状态 预警
"""
# 每分钟检查一次
now_time = time.time()
if now_time - self._last_check_task_status_time > 60:
self._last_check_task_status_time = now_time
else:
return
# 检查redis中任务状态，若连续20分钟内任务数量未发生变化（parser可能卡死），则发出报警信息
task_count = self._redisdb.zget_count(self._tab_requests)
if task_count:
if task_count != self._last_task_count:
self._last_task_count = task_count
self._redisdb.hset(
self._tab_spider_time,
SPIDER_LAST_TASK_COUNT_RECORD_TIME_KEY,
tools.get_current_timestamp(),
) # 多进程会重复发消息， 使用reids记录上次统计时间
else:
# 判断时间间隔是否超过20分钟
lua = """
-- local key = KEYS[1]
local field = ARGV[1]
local current_timestamp = ARGV[2]
-- 取值
local last_timestamp = redis.call('hget', KEYS[1], field)
if last_timestamp and current_timestamp - last_timestamp >= 1200 then
return current_timestamp - last_timestamp -- 返回任务停滞时间 秒
end
if not last_timestamp then
redis.call('hset', KEYS[1], field, current_timestamp)
end
return 0
"""
redis_obj = self._redisdb.get_redis_obj()
cmd = redis_obj.register_script(lua)
overtime = cmd(
keys=[self._tab_spider_time],
args=[
SPIDER_LAST_TASK_COUNT_RECORD_TIME_KEY,
tools.get_current_timestamp(),
],
)
if overtime:
# 发送报警
msg = "《{}》爬虫任务停滞 {}，请检查爬虫是否正常".format(
self._spider_name, tools.format_seconds(overtime)
)
log.error(msg)
self.send_msg(
msg,
level="error",
message_prefix="《{}》爬虫任务停滞".format(self._spider_name),
)
else:
self._last_task_count = 0
# 检查失败任务数量 超过1000 报警，
failed_count = self._redisdb.zget_count(self._tab_failed_requests)
if failed_count > setting.WARNING_FAILED_COUNT:
# 发送报警
msg = "《%s》爬虫当前失败任务 %s, 请检查爬虫是否正常" % (self._spider_name, failed_count)
log.error(msg)
self.send_msg(
msg,
level="error",
message_prefix="《%s》爬虫当前失败任务数预警" % (self._spider_name),
)
# parser_control实时统计已做任务数及失败任务数，若失败数大于10且失败任务数/已做任务数>=0.5 则报警
failed_task_count, success_task_count = PaserControl.get_task_status_count()
total_count = success_task_count + failed_task_count
if total_count > 0:
task_success_rate = success_task_count / total_count
if task_success_rate < 0.5:
# 发送报警
msg = "《%s》爬虫当前任务成功数%s, 失败数%s, 成功率 %.2f, 请检查爬虫是否正常" % (
self._spider_name,
success_task_count,
failed_task_count,
task_success_rate,
)
log.error(msg)
# 统计下上次发消息的时间，若时间大于1小时，则报警（此处为多进程，需要考虑别报重复）
self.send_msg(
msg,
level="error",
message_prefix="《%s》爬虫当前任务成功率" % (self._spider_name),
)
def delete_tables(self, delete_tables_list):
if isinstance(delete_tables_list, bool):
delete_tables_list = [self._redis_key + "*"]
elif not isinstance(delete_tables_list, (list, tuple)):
delete_tables_list = [delete_tables_list]
redis = RedisDB()
for delete_tab in delete_tables_list:
if not delete_tab.startswith(self._redis_key):
delete_tab = self._redis_key + delete_tab
tables = redis.getkeys(delete_tab)
for table in tables:
if table != self._tab_spider_time:
log.info("正在删除key %s" % table)
redis.clear(table)
def _stop_all_thread(self):
self._request_buffer.stop()
self._item_buffer.stop()
# 停止 collector
self._collector.stop()
# 停止 parser_controls
for parser_control in self._parser_controls:
parser_control.stop()
def send_msg(self, msg, level="debug", message_prefix=""):
if setting.WARNING_LEVEL == "ERROR":
if level != "error":
return
if setting.DINGDING_WARNING_PHONE:
keyword = "feapder报警系统\n"
tools.dingding_warning(keyword + msg, message_prefix=message_prefix)
if setting.EMAIL_RECEIVER:
tools.email_warning(
msg, message_prefix=message_prefix, title=self._spider_name
)
def spider_begin(self):
"""
@summary: start_monitor_task 方式启动，此函数与spider_end不在同一进程内，变量不可共享
---------
---------
@result:
"""
if self._begin_callback:
self._begin_callback()
for parser in self._parsers:
parser.start_callback()
# 记录开始时间
if not self._redisdb.hexists(self._tab_spider_time, SPIDER_START_TIME_KEY):
current_timestamp = tools.get_current_timestamp()
self._redisdb.hset(
self._tab_spider_time, SPIDER_START_TIME_KEY, current_timestamp
)
# 发送消息
self.send_msg("《%s》爬虫开始" % self._spider_name)
def spider_end(self):
self.record_end_time()
if self._end_callback:
self._end_callback()
for parser in self._parsers:
parser.close()
parser.end_callback()
# 关闭webdirver
if Request.webdriver_pool:
Request.webdriver_pool.close()
# 计算抓取时常
data = self._redisdb.hget(
self._tab_spider_time, SPIDER_START_TIME_KEY, is_pop=True
)
if data:
begin_timestamp = int(data)
spand_time = tools.get_current_timestamp() - begin_timestamp
msg = "《%s》爬虫结束，耗时 %s" % (
self._spider_name,
tools.format_seconds(spand_time),
)
log.info(msg)
if self._send_run_time:
self.send_msg(msg)
if not self._auto_stop_when_spider_done:
log.info("爬虫不自动结束， 等待下一轮任务...")
else:
self.delete_tables(self._tab_spider_status)
def record_end_time(self):
# 记录结束时间
if self._batch_interval:
current_timestamp = tools.get_current_timestamp()
self._redisdb.hset(
self._tab_spider_time, SPIDER_END_TIME_KEY, current_timestamp
)
def is_reach_next_spider_time(self):
if not self._batch_interval:
return True
last_spider_end_time = self._redisdb.hget(
self._tab_spider_time, SPIDER_END_TIME_KEY
)
if last_spider_end_time:
last_spider_end_time = int(last_spider_end_time)
current_timestamp = tools.get_current_timestamp()
time_interval = current_timestamp - last_spider_end_time
if time_interval < self._batch_interval * 86400:
log.info(
"上次运行结束时间为 {} 与当前时间间隔 为 {}, 小于规定的抓取时间间隔 {}。爬虫不执行，退出～".format(
tools.timestamp_to_date(last_spider_end_time),
tools.format_seconds(time_interval),
tools.format_seconds(self._batch_interval * 86400),
)
)
return False
return True
def record_spider_state(
self,
spider_type,
state,
batch_date=None,
spider_start_time=None,
spider_end_time=None,
batch_interval=None,
):
pass
def __init__(
self,
redis_key=None,
thread_count=None,
begin_callback=None,
end_callback=None,
delete_keys=(),
auto_stop_when_spider_done=None,
auto_start_requests=None,
send_run_time=True,
batch_interval=0,
wait_lock=True,
task_table=None,
):
"""
@summary: 调度器
---------
@param redis_key: 爬虫request及item存放reis中的文件夹
@param thread_count: 线程数，默认为配置文件中的线程数
@param begin_callback: 爬虫开始回调函数
@param end_callback: 爬虫结束回调函数
@param delete_keys: 爬虫启动时删除的key，类型: 元组/bool/string。 支持正则
@param auto_stop_when_spider_done: 爬虫抓取完毕后是否自动结束或等待任务，默认自动结束
@param auto_start_requests: 爬虫是否自动添加任务
@param send_run_time: 发送运行时间
@param batch_interval: 抓取时间间隔 默认为0 天为单位 多次启动时，只有当前时间与第一次抓取结束的时间间隔大于指定的时间间隔时，爬虫才启动
@param wait_lock: 下发任务时否等待锁，若不等待锁，可能会存在多进程同时在下发一样的任务，因此分布式环境下请将该值设置True
@param task_table: 任务表， 批次爬虫传递
---------
@result:
"""
super(Scheduler, self).__init__()
for key, value in self.__class__.__custom_setting__.items():
setattr(setting, key, value)
log.reload()
self._redis_key = redis_key or setting.REDIS_KEY
if not self._redis_key:
raise Exception(
"""
redis_key 为redis中存放request与item的目录。不能为空，
可在setting中配置，如 REDIS_KEY = 'test'
或spider初始化时传参, 如 TestSpider(redis_key='test')
"""
)
self._request_buffer = RequestBuffer(redis_key)
self._item_buffer = ItemBuffer(redis_key, task_table)
self._collector = Collector(redis_key)
self._parsers = []
self._parser_controls = []
self._parser_control_obj = PaserControl
self._auto_stop_when_spider_done = (
auto_stop_when_spider_done
if auto_stop_when_spider_done is not None
else setting.AUTO_STOP_WHEN_SPIDER_DONE
)
self._auto_start_requests = (
auto_start_requests
if auto_start_requests is not None
else setting.SPIDER_AUTO_START_REQUESTS
)
self._send_run_time = send_run_time
self._batch_interval = batch_interval
self._begin_callback = (
begin_callback
if begin_callback
else lambda: log.info("\n********** feapder begin **********")
)
self._end_callback = (
end_callback
if end_callback
else lambda: log.info("\n********** feapder end **********")
)
self._thread_count = (
setting.SPIDER_THREAD_COUNT if not thread_count else thread_count
)
self._spider_name = redis_key
self._project_name = redis_key.split(":")[0]
self._tab_spider_time = setting.TAB_SPIDER_TIME.format(redis_key=redis_key)
self._tab_spider_status = setting.TAB_SPIDER_STATUS.format(redis_key=redis_key)
self._tab_requests = setting.TAB_REQUSETS.format(redis_key=redis_key)
self._tab_failed_requests = setting.TAB_FAILED_REQUSETS.format(
redis_key=redis_key
)
self._is_notify_end = False # 是否已经通知结束
self._last_task_count = 0 # 最近一次任务数量
self._redisdb = RedisDB()
self._project_total_state_table = "{}_total_state".format(self._project_name)
self._is_exist_project_total_state_table = False
# Request 缓存设置
Request.cached_redis_key = redis_key
Request.cached_expire_time = setting.RESPONSE_CACHED_EXPIRE_TIME
delete_keys = delete_keys or setting.DELETE_KEYS
if delete_keys:
self.delete_tables(delete_keys)
self._last_check_task_status_time = 0
self.wait_lock = wait_lock
class Scheduler(threading.Thread):
__custom_setting__ = {}
def __init__(
self,
redis_key=None,
thread_count=None,
begin_callback=None,
end_callback=None,
delete_keys=(),
keep_alive=None,
auto_start_requests=None,
batch_interval=0,
wait_lock=True,
task_table=None,
**kwargs,
):
"""
@summary: 调度器
---------
@param redis_key: 爬虫request及item存放redis中的文件夹
@param thread_count: 线程数，默认为配置文件中的线程数
@param begin_callback: 爬虫开始回调函数
@param end_callback: 爬虫结束回调函数
@param delete_keys: 爬虫启动时删除的key，类型: 元组/bool/string。 支持正则
@param keep_alive: 爬虫是否常驻，默认否
@param auto_start_requests: 爬虫是否自动添加任务
@param batch_interval: 抓取时间间隔 默认为0 天为单位 多次启动时，只有当前时间与第一次抓取结束的时间间隔大于指定的时间间隔时，爬虫才启动
@param wait_lock: 下发任务时否等待锁，若不等待锁，可能会存在多进程同时在下发一样的任务，因此分布式环境下请将该值设置True
@param task_table: 任务表， 批次爬虫传递
---------
@result:
"""
super(Scheduler, self).__init__()
for key, value in self.__class__.__custom_setting__.items():
if key == "AUTO_STOP_WHEN_SPIDER_DONE": # 兼容老版本的配置
setattr(setting, "KEEP_ALIVE", not value)
else:
setattr(setting, key, value)
self._redis_key = redis_key or setting.REDIS_KEY
if not self._redis_key:
raise Exception(
"""
redis_key 为redis中存放request与item的目录。不能为空，
可在setting中配置，如 REDIS_KEY = 'test'
或spider初始化时传参, 如 TestSpider(redis_key='test')
"""
)
self._request_buffer = RequestBuffer(redis_key)
self._item_buffer = ItemBuffer(redis_key, task_table)
self._collector = Collector(redis_key)
self._parsers = []
self._parser_controls = []
self._parser_control_obj = ParserControl
# 兼容老版本的参数
if "auto_stop_when_spider_done" in kwargs:
self._keep_alive = not kwargs.get("auto_stop_when_spider_done")
else:
self._keep_alive = (
keep_alive if keep_alive is not None else setting.KEEP_ALIVE
)
self._auto_start_requests = (
auto_start_requests
if auto_start_requests is not None
else setting.SPIDER_AUTO_START_REQUESTS
)
self._batch_interval = batch_interval
self._begin_callback = (
begin_callback
if begin_callback
else lambda: log.info("\n********** feapder begin **********")
)
self._end_callback = (
end_callback
if end_callback
else lambda: log.info("\n********** feapder end **********")
)
if thread_count:
setattr(setting, "SPIDER_THREAD_COUNT", thread_count)
self._thread_count = setting.SPIDER_THREAD_COUNT
self._spider_name = redis_key
self._project_name = redis_key.split(":")[0]
self._tab_spider_status = setting.TAB_SPIDER_STATUS.format(redis_key=redis_key)
self._tab_requests = setting.TAB_REQUESTS.format(redis_key=redis_key)
self._tab_failed_requests = setting.TAB_FAILED_REQUESTS.format(
redis_key=redis_key
)
self._is_notify_end = False # 是否已经通知结束
self._last_task_count = 0 # 最近一次任务数量
self._last_check_task_count_time = 0
self._redisdb = RedisDB()
self._project_total_state_table = "{}_total_state".format(self._project_name)
self._is_exist_project_total_state_table = False
# Request 缓存设置
Request.cached_redis_key = redis_key
Request.cached_expire_time = setting.RESPONSE_CACHED_EXPIRE_TIME
delete_keys = delete_keys or setting.DELETE_KEYS
if delete_keys:
self.delete_tables(delete_keys)
self._last_check_task_status_time = 0
self.wait_lock = wait_lock
self.init_metrics()
# 重置丢失的任务
self.reset_task()
def init_metrics(self):
"""
初始化打点系统
"""
metrics.init(**setting.METRICS_OTHER_ARGS)
def add_parser(self, parser, **kwargs):
parser = parser(**kwargs) # parser 实例化
if isinstance(parser, BaseParser):
self._parsers.append(parser)
else:
raise ValueError("类型错误，爬虫需继承feapder.BaseParser或feapder.BatchParser")
def run(self):
if not self.is_reach_next_spider_time():
return
self._start()
while True:
try:
self.heartbeat()
if self.all_thread_is_done():
if not self._is_notify_end:
self.spider_end() # 跑完一轮
self.record_spider_state(
spider_type=1,
state=1,
spider_end_time=tools.get_current_date(),
batch_interval=self._batch_interval,
)
self._is_notify_end = True
if not self._keep_alive:
self._stop_all_thread()
break
else:
self._is_notify_end = False
self.check_task_status()
except Exception as e:
log.exception(e)
tools.delay_time(1) # 1秒钟检查一次爬虫状态
def __add_task(self):
# 启动parser 的 start_requests
self.spider_begin() # 不自动结束的爬虫此处只能执行一遍
self.record_spider_state(
spider_type=1,
state=0,
batch_date=tools.get_current_date(),
spider_start_time=tools.get_current_date(),
batch_interval=self._batch_interval,
)
# 判断任务池中属否还有任务，若有接着抓取
todo_task_count = self._collector.get_requests_count()
if todo_task_count:
log.info("检查到有待做任务 %s 条，不重下发新任务，将接着上回异常终止处继续抓取" % todo_task_count)
else:
for parser in self._parsers:
results = parser.start_requests()
# 添加request到请求队列，由请求队列统一入库
if results and not isinstance(results, Iterable):
raise Exception("%s.%s返回值必须可迭代" % (parser.name, "start_requests"))
result_type = 1
for result in results or []:
if isinstance(result, Request):
result.parser_name = result.parser_name or parser.name
self._request_buffer.put_request(result)
result_type = 1
elif isinstance(result, Item):
self._item_buffer.put_item(result)
result_type = 2
elif callable(result): # callbale的request可能是更新数据库操作的函数
if result_type == 1:
self._request_buffer.put_request(result)
else:
self._item_buffer.put_item(result)
else:
raise TypeError(
"start_requests yield result type error, expect Request、Item、callback func, bug get type: {}".format(
type(result)
)
)
self._request_buffer.flush()
self._item_buffer.flush()
def _start(self):
# 启动request_buffer
self._request_buffer.start()
# 启动item_buffer
self._item_buffer.start()
# 启动collector
self._collector.start()
# 启动parser control
for i in range(self._thread_count):
parser_control = self._parser_control_obj(
self._collector,
self._redis_key,
self._request_buffer,
self._item_buffer,
)
for parser in self._parsers:
parser_control.add_parser(parser)
parser_control.start()
self._parser_controls.append(parser_control)
# 下发任务 因为时间可能比较长，放到最后面
if setting.RETRY_FAILED_REQUESTS:
# 重设失败的任务, 不用加锁，原子性操作
handle_failed_requests = HandleFailedRequests(self._redis_key)
handle_failed_requests.reput_failed_requests_to_requests()
# 下发新任务
if self._auto_start_requests: # 自动下发
if self.wait_lock:
# 将添加任务处加锁，防止多进程之间添加重复的任务
with RedisLock(key=self._spider_name) as lock:
if lock.locked:
self.__add_task()
else:
self.__add_task()
def all_thread_is_done(self):
# 降低偶然性, 因为各个环节不是并发的，很有可能当时状态为假，但检测下一条时该状态为真。一次检测很有可能遇到这种偶然性
for i in range(3):
# 检测 collector 状态
if (
self._collector.is_collector_task()
or self._collector.get_requests_count() > 0
):
return False
# 检测 parser_control 状态
for parser_control in self._parser_controls:
if not parser_control.is_not_task():
return False
# 检测 item_buffer 状态
if (
self._item_buffer.get_items_count() > 0
or self._item_buffer.is_adding_to_db()
):
return False
# 检测 request_buffer 状态
if (
self._request_buffer.get_requests_count() > 0
or self._request_buffer.is_adding_to_db()
):
return False
tools.delay_time(1)
return True
@tools.run_safe_model("check_task_status")
def check_task_status(self):
"""
检查任务状态 预警
"""
# 每分钟检查一次
now_time = time.time()
if now_time - self._last_check_task_status_time > 60:
self._last_check_task_status_time = now_time
else:
return
# 检查失败任务数量 超过1000 报警，
failed_count = self._redisdb.zget_count(self._tab_failed_requests)
if failed_count > setting.WARNING_FAILED_COUNT:
# 发送报警
msg = "《%s》爬虫当前失败任务数：%s, 请检查爬虫是否正常" % (self._spider_name, failed_count)
log.error(msg)
self.send_msg(
msg,
level="error",
message_prefix="《%s》爬虫当前失败任务数报警" % (self._spider_name),
)
# parser_control实时统计已做任务数及失败任务数，若成功率<0.5 则报警
(
failed_task_count,
success_task_count,
total_task_count,
) = ParserControl.get_task_status_count()
total_count = success_task_count + failed_task_count
if total_count > 0:
task_success_rate = success_task_count / total_count
if task_success_rate < 0.5:
# 发送报警
msg = "《%s》爬虫当前任务成功数%s, 失败数%s, 成功率 %.2f, 请检查爬虫是否正常" % (
self._spider_name,
success_task_count,
failed_task_count,
task_success_rate,
)
log.error(msg)
self.send_msg(
msg,
level="error",
message_prefix="《%s》爬虫当前任务成功率报警" % (self._spider_name),
)
# 判断任务数是否变化
current_time = tools.get_current_timestamp()
if (
current_time - self._last_check_task_count_time
> setting.WARNING_CHECK_TASK_COUNT_INTERVAL
):
if self._last_task_count and self._last_task_count == total_task_count:
# 发送报警
msg = "《{}》爬虫任务停滞 {}，请检查爬虫是否正常".format(
self._spider_name,
tools.format_seconds(
current_time - self._last_check_task_count_time
),
)
log.error(msg)
self.send_msg(
msg,
level="error",
message_prefix="《{}》爬虫任务停滞".format(self._spider_name),
)
else:
self._last_task_count = total_task_count
self._last_check_task_count_time = current_time
# 检查入库失败次数
if self._item_buffer.export_falied_times > setting.EXPORT_DATA_MAX_FAILED_TIMES:
msg = "《{}》爬虫导出数据失败，失败次数：{}， 请检查爬虫是否正常".format(
self._spider_name, self._item_buffer.export_falied_times
)
log.error(msg)
self.send_msg(
msg, level="error", message_prefix="《%s》爬虫导出数据失败" % (self._spider_name)
)
def delete_tables(self, delete_tables_list):
if isinstance(delete_tables_list, bool):
delete_tables_list = [self._redis_key + "*"]
elif not isinstance(delete_tables_list, (list, tuple)):
delete_tables_list = [delete_tables_list]
for delete_tab in delete_tables_list:
if not delete_tab.startswith(self._redis_key):
delete_tab = self._redis_key + delete_tab
tables = self._redisdb.getkeys(delete_tab)
for table in tables:
log.debug("正在删除key %s" % table)
self._redisdb.clear(table)
def _stop_all_thread(self):
self._request_buffer.stop()
self._item_buffer.stop()
# 停止 collector
self._collector.stop()
# 停止 parser_controls
for parser_control in self._parser_controls:
parser_control.stop()
self._started.clear()
def send_msg(self, msg, level="debug", message_prefix=""):
# log.debug("发送报警 level:{} msg{}".format(level, msg))
tools.send_msg(msg=msg, level=level, message_prefix=message_prefix)
def spider_begin(self):
"""
@summary: start_monitor_task 方式启动，此函数与spider_end不在同一进程内，变量不可共享
---------
---------
@result:
"""
if self._begin_callback:
self._begin_callback()
for parser in self._parsers:
parser.start_callback()
# 记录开始时间
if not self._redisdb.hexists(self._tab_spider_status, SPIDER_START_TIME_KEY):
current_timestamp = tools.get_current_timestamp()
self._redisdb.hset(
self._tab_spider_status, SPIDER_START_TIME_KEY, current_timestamp
)
# 发送消息
self.send_msg("《%s》爬虫开始" % self._spider_name)
def spider_end(self):
self.record_end_time()
if self._end_callback:
self._end_callback()
for parser in self._parsers:
if not self._keep_alive:
parser.close()
parser.end_callback()
if not self._keep_alive:
# 关闭webdirver
if Request.webdriver_pool:
Request.webdriver_pool.close()
# 关闭打点
metrics.close()
else:
metrics.flush()
# 计算抓取时长
data = self._redisdb.hget(
self._tab_spider_status, SPIDER_START_TIME_KEY, is_pop=True
)
if data:
begin_timestamp = int(data)
spand_time = tools.get_current_timestamp() - begin_timestamp
msg = "《%s》爬虫结束，耗时 %s" % (
self._spider_name,
tools.format_seconds(spand_time),
)
log.info(msg)
self.send_msg(msg)
if self._keep_alive:
log.info("爬虫不自动结束， 等待下一轮任务...")
else:
self.delete_tables(self._tab_spider_status)
def record_end_time(self):
# 记录结束时间
if self._batch_interval:
current_timestamp = tools.get_current_timestamp()
self._redisdb.hset(
self._tab_spider_status, SPIDER_END_TIME_KEY, current_timestamp
)
def is_reach_next_spider_time(self):
if not self._batch_interval:
return True
last_spider_end_time = self._redisdb.hget(
self._tab_spider_status, SPIDER_END_TIME_KEY
)
if last_spider_end_time:
last_spider_end_time = int(last_spider_end_time)
current_timestamp = tools.get_current_timestamp()
time_interval = current_timestamp - last_spider_end_time
if time_interval < self._batch_interval * 86400:
log.info(
"上次运行结束时间为 {} 与当前时间间隔 为 {}, 小于规定的抓取时间间隔 {}。爬虫不执行，退出～".format(
tools.timestamp_to_date(last_spider_end_time),
tools.format_seconds(time_interval),
tools.format_seconds(self._batch_interval * 86400),
)
)
return False
return True
def record_spider_state(
self,
spider_type,
state,
batch_date=None,
spider_start_time=None,
spider_end_time=None,
batch_interval=None,
):
pass
def join(self, timeout=None):
"""
重写线程的join
"""
if not self._started.is_set():
return
super().join()
def heartbeat(self):
self._redisdb.hset(
self._tab_spider_status, HEARTBEAT_TIME_KEY, tools.get_current_timestamp()
)
def have_alive_spider(self, heartbeat_interval=10):
heartbeat_time = self._redisdb.hget(self._tab_spider_status, HEARTBEAT_TIME_KEY)
if heartbeat_time:
heartbeat_time = int(heartbeat_time)
current_timestamp = tools.get_current_timestamp()
if current_timestamp > heartbeat_time + heartbeat_interval:
return True
return False
def reset_task(self, heartbeat_interval=10):
"""
重置丢失的任务
Returns:
"""
if self.have_alive_spider(heartbeat_interval=heartbeat_interval):
current_timestamp = tools.get_current_timestamp()
datas = self._redisdb.zrangebyscore_set_score(
self._tab_requests,
priority_min=current_timestamp,
priority_max=current_timestamp + setting.REQUEST_LOST_TIMEOUT,
score=300,
count=None,
)
lose_count = len(datas)
if lose_count:
log.info("重置丢失任务完毕，共{}条".format(len(datas)))