def main(args):
parser = _createParser()
log.debug('rrdmon', 'Parsing arguments (%r)' % ', '.join(args))
options, args = parser.parse_args(args)
# Force options down configure's throat
for d in ['logdir', 'rundir']:
o = getattr(options, d, None)
if o:
log.debug('rrdmon', 'Setting configure.%s to %s' % (d, o))
setattr(configure, d, o)
# check if a config file was specified; if so, parse config and copy over
if len(args) != 2:
raise SystemExit('usage: flumotion-rrdtool [OPTIONS] CONFIG-FILE')
confXml = args[1]
cfg = _readConfig(confXml, options)
# reset FLU_DEBUG which could be different after parsing XML file
if options.debug:
log.setFluDebug(options.debug)
if options.daemonizeTo and not options.daemonize:
sys.stderr.write(
'ERROR: --daemonize-to can only be used with -D/--daemonize.\n')
return 1
if options.serviceName and not options.daemonize:
sys.stderr.write(
'ERROR: --service-name can only be used with -D/--daemonize.\n')
return 1
monitor = rrdmon.RRDMonitor(cfg['sources'])
name = 'rrdmon'
if options.daemonize:
if options.serviceName:
name = options.serviceName
if not options.daemonizeTo:
options.daemonizeTo = "/"
startup("rrdmon", name, options.daemonize, options.daemonizeTo)
log.debug('rrdmon', 'Running Flumotion version %s' %
configure.version)
import twisted.copyright
log.debug('rrdmon', 'Running against Twisted version %s' %
twisted.copyright.version)
# go into the reactor main loop
reactor.run()
return 0
if options.transport == "ssl":
myServer.startSSL(options.host, options.port, options.certificate, configure.configdir)
elif options.transport == "tcp":
myServer.startTCP(options.host, options.port)
except error.CannotListenError, e:
# e is a socket.error()
message = "Could not listen on port %d: %s" % (e.port, e.socketError.args[1])
raise errors.FatalError, message
if options.daemonizeTo and not options.daemonize:
sys.stderr.write("ERROR: --daemonize-to can only be used with -D/--daemonize.\n")
return 1
if options.serviceName and not options.daemonize:
sys.stderr.write("ERROR: --service-name can only be used with -D/--daemonize.\n")
return 1
name = options.name
if options.daemonize:
if options.serviceName:
name = options.serviceName
if not options.daemonizeTo:
options.daemonizeTo = "/"
startup("manager", name, options.daemonize, options.daemonizeTo)
reactor.run()
return 0
def main(args):
parser = _createParser()
log.debug('worker', 'Parsing arguments (%r)' % ', '.join(args))
options, args = parser.parse_args(args)
# Force options down configure's throat
for d in ['logdir', 'rundir']:
o = getattr(options, d, None)
if o:
log.debug('worker', 'Setting configure.%s to %s' % (d, o))
setattr(configure, d, o)
# translate feederports string to range
if options.feederports:
if not '-' in options.feederports:
raise errors.OptionError("feederports '%s' does not contain '-'" %
options.feederports)
(lower, upper) = options.feederports.split('-')
options.feederports = range(int(lower), int(upper) + 1)
# check if a config file was specified; if so, parse config and copy over
if len(args) > 1:
workerFile = args[1]
_readConfig(workerFile, options)
# set default values for all unset options
if not options.host:
options.host = 'localhost'
if not options.transport:
options.transport = 'ssl'
if not options.port:
if options.transport == "tcp":
options.port = configure.defaultTCPManagerPort
elif options.transport == "ssl":
options.port = configure.defaultSSLManagerPort
# set a default name if none is given
if not options.name:
if options.host == 'localhost':
options.name = 'localhost'
log.debug('worker', 'Setting worker name localhost')
else:
import socket
options.name = socket.gethostname()
log.debug('worker', 'Setting worker name %s (from hostname)' %
options.name)
if options.feederports is None and not options.randomFeederports:
options.feederports = configure.defaultGstPortRange
log.debug('worker', 'Using default feederports %r' %
options.feederports)
# check for wrong options/arguments
if not options.transport in ['ssl', 'tcp']:
sys.stderr.write('ERROR: wrong transport %s, must be ssl or tcp\n' %
options.transport)
return 1
# reset FLU_DEBUG which could be different after parsing XML file
if options.debug:
log.setFluDebug(options.debug)
if options.daemonizeTo and not options.daemonize:
sys.stderr.write(
'ERROR: --daemonize-to can only be used with -D/--daemonize.\n')
return 1
if options.serviceName and not options.daemonize:
sys.stderr.write(
'ERROR: --service-name can only be used with -D/--daemonize.\n')
return 1
brain = worker.WorkerBrain(options)
# Now bind and listen to our unix and tcp sockets
if not brain.listen():
sys.stderr.write('ERROR: Failed to listen on worker ports.\n')
return 1
name = options.name
if options.daemonize:
if options.serviceName:
name = options.serviceName
if not options.daemonizeTo:
options.daemonizeTo = "/"
startup("worker", name, options.daemonize, options.daemonizeTo)
log.debug('worker', 'Running Flumotion version %s' %
configure.version)
import twisted.copyright
log.debug('worker', 'Running against Twisted version %s' %
twisted.copyright.version)
# register all package paths (FIXME: this should go away when
# components come from manager)
from flumotion.common import setup
setup.setupPackagePath()
# FIXME: why address='localhost' ?
authenticator = pb.Authenticator(username=options.username,
password=options.password,
address='localhost',
avatarId=options.name)
info = connection.PBConnectionInfo(options.host, options.port,
options.transport == "ssl",
authenticator)
brain.login(info)
log.info('worker',
'Connecting to manager %s using %s' % (info,
options.transport.upper()))
# go into the reactor main loop
reactor.run()
return 0
myServer.startTCP(options.host, options.port)
except error.CannotListenError, e:
# e is a socket.error()
message = "Could not listen on port %d: %s" % (
e.port, e.socketError.args[1])
raise errors.FatalError, message
if options.daemonizeTo and not options.daemonize:
sys.stderr.write(
'ERROR: --daemonize-to can only be used with -D/--daemonize.\n')
return 1
if options.serviceName and not options.daemonize:
sys.stderr.write(
'ERROR: --service-name can only be used with -D/--daemonize.\n')
return 1
name = options.name
if options.daemonize:
if options.serviceName:
name = options.serviceName
if not options.daemonizeTo:
options.daemonizeTo = "/"
startup("manager", name, options.daemonize, options.daemonizeTo)
reactor.run()
return 0
def main(args):
parser = _createParser()
log.debug('worker', 'Parsing arguments (%r)' % ', '.join(args))
options, args = parser.parse_args(args)
# Force options down configure's throat
for d in ['logdir', 'rundir']:
o = getattr(options, d, None)
if o:
log.debug('worker', 'Setting configure.%s to %s' % (d, o))
setattr(configure, d, o)
# translate feederports string to range
if options.feederports:
if not '-' in options.feederports:
raise errors.OptionError("feederports '%s' does not contain '-'" %
options.feederports)
(lower, upper) = options.feederports.split('-')
options.feederports = range(int(lower), int(upper) + 1)
# check if a config file was specified; if so, parse config and copy over
if len(args) > 1:
workerFile = args[1]
_readConfig(workerFile, options)
# set default values for all unset options
if not options.host:
options.host = 'localhost'
if not options.transport:
options.transport = 'ssl'
if not options.port:
if options.transport == "tcp":
options.port = configure.defaultTCPManagerPort
elif options.transport == "ssl":
options.port = configure.defaultSSLManagerPort
# set a default name if none is given
if not options.name:
if options.host == 'localhost':
options.name = 'localhost'
log.debug('worker', 'Setting worker name localhost')
else:
import socket
options.name = socket.gethostname()
log.debug('worker', 'Setting worker name %s (from hostname)' %
options.name)
if options.feederports is None and not options.randomFeederports:
options.feederports = configure.defaultGstPortRange
log.debug('worker', 'Using default feederports %r' %
options.feederports)
# check for wrong options/arguments
if not options.transport in ['ssl', 'tcp']:
sys.stderr.write('ERROR: wrong transport %s, must be ssl or tcp\n' %
options.transport)
return 1
# reset FLU_DEBUG which could be different after parsing XML file
if options.debug:
log.setFluDebug(options.debug)
if options.daemonizeTo and not options.daemonize:
sys.stderr.write(
'ERROR: --daemonize-to can only be used with -D/--daemonize.\n')
return 1
if options.serviceName and not options.daemonize:
sys.stderr.write(
'ERROR: --service-name can only be used with -D/--daemonize.\n')
return 1
brain = worker.WorkerBrain(options)
# Now bind and listen to our unix and tcp sockets
if not brain.listen():
sys.stderr.write('ERROR: Failed to listen on worker ports.\n')
return 1
name = options.name
if options.daemonize:
if options.serviceName:
name = options.serviceName
if not options.daemonizeTo:
options.daemonizeTo = "/"
startup("worker", name, options.daemonize, options.daemonizeTo)
log.debug('worker', 'Running Flumotion version %s' %
configure.version)
import twisted.copyright
log.debug('worker', 'Running against Twisted version %s' %
twisted.copyright.version)
# register all package paths (FIXME: this should go away when
# components come from manager)
from flumotion.common import setup
setup.setupPackagePath()
# FIXME: why address='localhost' ?
authenticator = pb.Authenticator(username=options.username,
password=options.password,
address='localhost',
avatarId=options.name)
info = connection.PBConnectionInfo(options.host, options.port,
options.transport == "ssl",
authenticator)
brain.login(info)
log.info('worker',
'Connecting to manager %s using %s' % (info,
options.transport.upper()))
# go into the reactor main loop
reactor.run()
return 0
