def __init__(self, otherPen, steps=10, filterDoubles=True):
BasePen.__init__(self, {})
self.otherPen = otherPen
self.currentPt = None
self.firstPt = None
self.steps = steps
self.filterDoubles = filterDoubles
def __init__(self, glyphSet, bounds, moveSegment=(0, 0)):
BasePen.__init__(self, glyphSet)
self.allSegments = set()
self.segments = set()
self.bounds = bounds
self.moveSegment = moveSegment
def __init__(self, cr, pos, id='EDITOR', scale=1.0):
BasePen.__init__(self, glyphSet={})
self.cr = cr
self.id = id
# the position the glyph is at while drawing it in a string of glyphs
self.pos = pos
self.glyph = globals.GLYPH_BOX[self.id]['glyph']
self.font = self.glyph.font
# The advance width of the glyph
self.w = H = self.glyph.width
# The difference in the ascender and the descender values
self.h = self.font.info.ascender - self.font.info.descender
# the distance between the baseline and the descender
self.b = 0 - self.font.info.descender
# the scale of the drawing
self.scale = scale
H = globals.GLYPH_BOX[self.id]['height'] # noqa
W = globals.GLYPH_BOX[self.id]['width'] # noqa
"""
def __init__(self, glyphSet, optimise=False):
BasePen.__init__(self, glyphSet)
self._commands = []
self._lastCommand = None
self._lastX = None
self._lastY = None
self.optimise = optimise
def __init__(self, glyphSet, ntos: Callable[[float], str] = str):
BasePen.__init__(self, glyphSet)
self._commands = []
self._lastCommand = None
self._lastX = None
self._lastY = None
self._ntos = ntos
def __init__(self, otherPen, selected = [], *splits ):
BasePen.__init__(self, {})
self.otherPen = otherPen
self.currentPt = None
self.firstPt = None
self.selected = selected
self.splits = splits
def __init__(self, glyphSet, yMul):
BasePen.__init__(self, glyphSet)
self._commands = []
self._lastCommand = None
self._lastX = None
self._lastY = None
self._yMul = yMul
def __init__(self, glyphSet, optimise=False):
BasePen.__init__(self, glyphSet)
self._commands = []
self._lastCommand = None
self._lastX = None
self._lastY = None
self.optimise = optimise
def __init__(self, glyphSet, x, y, scale, motherobject): BasePen.__init__(self, glyphSet) self.scale = scale self.motherobject = motherobject self.x = x self.y = -1 * y
def __init__(self, glyphSet): BasePen.__init__(self, glyphSet) self.ll = [None, None] self.ur = [None, None] self.width = None self.height = None
def __init__(self, glyphSet, x, y, scale, pathobject): BasePen.__init__(self, glyphSet) self.scale = scale self.pathobject = pathobject self.x = x self.y = y
def __init__(self, cr, pos, id='EDITOR', scale=1.0):
BasePen.__init__(self, glyphSet={})
self.cr = cr
self.id = id
# the position the glyph is at while drawing it in a string of glyphs
self.pos = pos
self.glyph = globals.GLYPH_BOX[self.id]['glyph']
self.font = self.glyph.font
# The advance width of the glyph
self.w = H = self.glyph.width
# The difference in the ascender and the descender values
self.h = self.font.info.ascender - self.font.info.descender
# the distance between the baseline and the descender
self.b = 0 - self.font.info.descender
# the scale of the drawing
self.scale = scale
H = globals.GLYPH_BOX[self.id]['height'] # noqa
W = globals.GLYPH_BOX[self.id]['width'] # noqa
"""
def __init__(self, glyphSet, bounds, moveSegment=(0, 0)):
BasePen.__init__(self, glyphSet)
self.allSegments = set()
self.segments = set()
self.bounds = bounds
self.moveSegment = moveSegment
def __init__(self, glyphSet, otherPen, resolution=25):
BasePen.__init__(self,glyphSet)
self.resolution = resolution
self.otherPen = otherPen
self.subsegments = []
self.startContour = (0,0)
self.contourIndex = -1
def __init__(self, glyphSet, path=None):
BasePen.__init__(self, glyphSet)
if path is None:
from AppKit import NSBezierPath
path = NSBezierPath.bezierPath()
self.path = path
def __init__(self, glyphSet, path=None):
BasePen.__init__(self, glyphSet)
if path is None:
from PyQt5.QtGui import QPainterPath
path = QPainterPath()
self.path = path
def __init__(self, otherPen, steps=10, filterDoubles=True):
BasePen.__init__(self, {})
self.otherPen = otherPen
self.currentPt = None
self.firstPt = None
self.steps = steps
self.filterDoubles = filterDoubles
def __init__(self, glyph):
BasePen.__init__(self, glyph)
self.glyph = RGlyph()
self.pen = self.glyph.getPen()
self.firstPt = None
self.prevPt = None
def __init__(self, otherPen, approximateSegmentLength=5, segmentLines=False, filterDoubles=True):
self.approximateSegmentLength = approximateSegmentLength
BasePen.__init__(self, {})
self.otherPen = otherPen
self.currentPt = None
self.firstPt = None
self.segmentLines = segmentLines
self.filterDoubles = filterDoubles
def __init__(self, otherPen, approximateSegmentLength=5, segmentLines=False, filterDoubles=True):
self.approximateSegmentLength = approximateSegmentLength
BasePen.__init__(self, {})
self.otherPen = otherPen
self.currentPt = None
self.firstPt = None
self.segmentLines = segmentLines
self.filterDoubles = filterDoubles
def __init__(self, glyphSet, value, isHorizontal=True):
BasePen.__init__(self, glyphSet)
self.value = value
self.hits = {}
self.filterDoubles = True
self.contourIndex = None
self.startPt = None
self.isHorizontal = isHorizontal
def __init__(self, glyphSet, step, width, height, angle, shape):
BasePen.__init__(self, glyphSet)
self.step = step
self.width = width
self.height = height
self.angle = angle
self.shape = shape
self.firstPoint = None
def __init__(self, glyphSet, value, isHorizontal=True):
BasePen.__init__(self, glyphSet)
self.value = value
self.hits = {}
self.filterDoubles = True
self.contourIndex = None
self.startPt = None
self.isHorizontal = isHorizontal
def __init__(self, point, font):
BasePen.__init__(self, glyphSet=font)
self.currentPt = None
self.firstPt = None
self.orthoPt = None
self.approximateSegmentLength = 1
self.point = point
self.bestDistance = 100000
def __init__(self, glyphSet, scale=1):
BasePen.__init__(self, glyphSet)
self._scale = scale
self._init_seq = self._get_init_sequence()
self._hpgl = ""
self._end_seq = self._get_end_sequence()
self._pen_down = False
self._prev_segment = None
def __init__(self, glyphSet, step, width, height, angle, shape):
BasePen.__init__(self, glyphSet)
self.step = step
self.width = width
self.height = height
self.angle = angle
self.shape = shape
self.firstPoint = None
def __init__(self,
glyphSet,
offset=10,
contrast=0,
contrastAngle=0,
connection="square",
cap="round",
miterLimit=None,
closeOpenPaths=True,
optimizeCurve=False,
preserveComponents=False,
filterDoubles=True,
alwaysConnect=False):
BasePen.__init__(self, glyphSet)
self.offset = abs(offset)
self.contrast = abs(contrast)
self.contrastAngle = contrastAngle
self._inputmiterLimit = miterLimit
if miterLimit is None:
miterLimit = self.offset * 2
self.miterLimit = abs(miterLimit)
self.closeOpenPaths = closeOpenPaths
self.optimizeCurve = optimizeCurve
self.connectionCallback = getattr(
self, "connection%s" % (connection.title()))
self.capCallback = getattr(self, "cap%s" % (cap.title()))
self.originalGlyph = Glyph()
self.originalPen = self.originalGlyph.getPen()
self.outerGlyph = Glyph()
self.outerPen = self.outerGlyph.getPen()
self.outerCurrentPoint = None
self.outerFirstPoint = None
self.outerPrevPoint = None
self.innerGlyph = Glyph()
self.innerPen = self.innerGlyph.getPen()
self.innerCurrentPoint = None
self.innerFirstPoint = None
self.innerPrevPoint = None
self.prevPoint = None
self.firstPoint = None
self.firstAngle = None
self.prevAngle = None
self.shouldHandleMove = True
self.preserveComponents = preserveComponents
self.components = []
self.filterDoubles = filterDoubles
self.alwaysConnect = alwaysConnect
self.drawSettings()
def __init__(self, glyphset=None): BasePen.__init__(self, glyphset) self.area = 0 self.momentX = 0 self.momentY = 0 self.momentXX = 0 self.momentXY = 0 self.momentYY = 0
def __init__(self, glyphset=None):
BasePen.__init__(self, glyphset)
self.area = 0
self.momentX = 0
self.momentY = 0
self.momentXX = 0
self.momentXY = 0
self.momentYY = 0
def __init__(self, path=None, glyphSet=None):
"""
>>> path = BaseBezierPath()
>>> path
<BaseBezierPath>
"""
self._contours = []
#super().__init__(glyphSet)
BasePen.__init__(self, glyphSet)
def __init__(self, glyphSet, otherPen, subsegmentGlyph, subsegments):
BasePen.__init__(self, None)
self.otherPen = otherPen
self.ssglyph = subsegmentGlyph
self.subsegments = subsegments
self.contourIndex = -1
self.segmentIndex = -1
self.lastPoint = (0,0)
self.lastSmooth = False
self.nextSmooth = False
def __init__(self, glyphset=None, tolerance=0.005):
BasePen.__init__(self, glyphset)
self.value = 0
self.tolerance = tolerance
# Choose which algorithm to use for quadratic and for cubic.
# Quadrature is faster but has fixed error characteristic with no strong
# error bound. The cutoff points are derived empirically.
self._addCubic = self._addCubicQuadrature if tolerance >= 0.0015 else self._addCubicRecursive
self._addQuadratic = self._addQuadraticQuadrature if tolerance >= 0.00075 else self._addQuadraticExact
def __init__(self, glyphSet, width, italicAngle):
BasePen.__init__(self, glyphSet)
self.width = width
self._angle = math.radians(90 + italicAngle)
self.maxSteps = 100
self.margin = None
self._left = None
self._right = None
self._start = None
self.currentPoint = None
def __init__(self, glyphSet, width, italicAngle):
BasePen.__init__(self, glyphSet)
self.width = width
self._angle = math.radians(90 + italicAngle)
self.maxSteps = 100
self.margin = None
self._left = None
self._right = None
self._start = None
self.currentPt = None
def __init__(self, glyphset=None, tolerance=0.005): BasePen.__init__(self, glyphset) self.value = 0 self._mult = 1.+1.5*tolerance # The 1.5 is a empirical hack; no math # Choose which algorithm to use for quadratic and for cubic. # Quadrature is faster but has fixed error characteristic with no strong # error bound. The cutoff points are derived empirically. self._addCubic = self._addCubicQuadrature if tolerance >= 0.0015 else self._addCubicRecursive self._addQuadratic = self._addQuadraticQuadrature if tolerance >= 0.00075 else self._addQuadraticExact
def __init__(self, glyphSet, radius, draw):
BasePen.__init__(self, glyphSet)
self.radius = radius
self.draw = draw
self.glyph = CurrentGlyph()
self.glyphcopy = self.glyph.copy()
if self.draw:
self.glyphcopy.clear()
def __init__(
self,
glyphSet,
offset=10,
contrast=0,
contrastAngle=0,
connection="square",
cap="round",
miterLimit=None,
closeOpenPaths=True,
optimizeCurve=False,
preserveComponents=False,
):
BasePen.__init__(self, glyphSet)
self.offset = abs(offset)
self.contrast = abs(contrast)
self.contrastAngle = contrastAngle
self._inputmiterLimit = miterLimit
if miterLimit is None:
miterLimit = self.offset * 2
self.miterLimit = abs(miterLimit)
self.closeOpenPaths = closeOpenPaths
self.optimizeCurve = optimizeCurve
self.connectionCallback = getattr(self, "connection%s" % (connection.title()))
self.capCallback = getattr(self, "cap%s" % (cap.title()))
self.originalGlyph = Glyph()
self.originalPen = self.originalGlyph.getPen()
self.outerGlyph = Glyph()
self.outerPen = self.outerGlyph.getPen()
self.outerCurrentPoint = None
self.outerFirstPoint = None
self.outerPrevPoint = None
self.innerGlyph = Glyph()
self.innerPen = self.innerGlyph.getPen()
self.innerCurrentPoint = None
self.innerFirstPoint = None
self.innerPrevPoint = None
self.prevPoint = None
self.firstPoint = None
self.firstAngle = None
self.prevAngle = None
self.shouldHandleMove = True
self.preserveComponents = preserveComponents
self.components = []
self.drawSettings()
def __init__(self, state=None, rounding=False, scale=1, min_segment_units=20, max_curve_steps=50):
BasePen.__init__(self, glyphSet=None)
self._state = state
self._rounding = rounding
self._scale = scale
self._hpgl = []
self._prev_segment = None
self._select_pen()
self.min_segment_units = min_segment_units
self.max_curve_steps = max_curve_steps
self.currentPt = None
def __init__(self, dat, rect):
BasePen.__init__(self, None)
self.pStr = f""
self.lastMove = None
self.dat = dat
self.serialAttrs = {"tag":dat.tag()}
self.rect = rect
if self.rect:
tp = TransformPen(self, (1, 0, 0, -1, 0, self.rect.h))
dat.replay(tp)
else:
dat.replay(self)
def __init__(self, glyphSet,
freeMoveFeed, drawingFeed):
BasePen.__init__(self, glyphSet)
self.freeMoveFeed = freeMoveFeed
self.drawingFeed = drawingFeed
self._commands = [
'G21', # set units to mm
'M03 S0', # lift the pen
# 'G92 X0 Y0' # set the relative zero
]
self.lastPt = None
def __init__(self, glyphSet, round_coordinates=False, relative_coordinates=False, optimize_output=False):
"""
A pen that converts a glyph outline to an SVG path. After drawing, SVGPen.d contains the path as string. This corresponds to the SVG path element attribute "d".
glyphSet (RFont or GSFont) The font object
round_coordinates (Boolean) Round all coordinates to integer. Default is False.
relative_coordinates (Boolean) Store all coordinates as relative. Default is False, i.e. choose whichever notation (absolute or relative) produces shorter output for each individual segment.
optimize_output (Boolean) Make the output path string as short as possible. Default is True. Setting this to False also overrides the relative_coordinates option.
"""
self._rnd = round_coordinates
self._rel = relative_coordinates
self._opt = optimize_output
self.prev_x = 0
self.prev_y = 0
BasePen.__init__(self, glyphSet)
self.d = ''
def __init__(self,
glyphSet,
offset=10,
connection="square",
cap="round",
miterLimit=None,
closeOpenPaths=True):
BasePen.__init__(self, glyphSet)
self.offset = abs(offset)
self._inputmiterLimit = miterLimit
if miterLimit is None:
miterLimit = self.offset
self.miterLimit = abs(miterLimit)
self.closeOpenPaths = closeOpenPaths
self.connectionCallback = getattr(
self,
"connection%s" % (connection[0].capitalize() + connection[1:]))
self.capCallback = getattr(self,
"cap%s" % (cap[0].capitalize() + cap[1:]))
self.originalGlyph = Glyph()
self.originalPen = self.originalGlyph.getPen()
self.outerGlyph = Glyph()
self.outerPen = self.outerGlyph.getPen()
self.outerCurrentPoint = None
self.outerFirstPoint = None
self.outerPrevPoint = None
self.innerGlyph = Glyph()
self.innerPen = self.innerGlyph.getPen()
self.innerCurrentPoint = None
self.innerFirstPoint = None
self.innerPrevPoint = None
self.prevPoint = None
self.firstPoint = None
self.firstAngle = None
self.prevAngle = None
self.shouldHandleMove = True
self.drawSettings()
def __init__(self, glyphSet, boundingBox, creator="AICBPen"):
BasePen.__init__(self, glyphSet)
boundingBox = ' '.join([str(i) for i in boundingBox])
self._epsData = [
"%!PS-Adobe-3.0",
"%%%%Creator: %s" % creator,
"%%%%Title: %s Data" % creator,
"%%%%CreationDate: %s" % _timeStamp(),
"%%%%BoundingBox: %s" % boundingBox,
"%%EndComments",
"%%BeginProlog",
_epsDict,
"%%EndProlog",
_epsSetup,
"0 A *u 0 O 0 g",
]
self._firstPoint = None
self._currentPoint = None
def __init__(self, cr, pos, scale = 1.0):
BasePen.__init__(self, glyphSet={})
self.cr = cr
#the position the glyph is at while drawing it in a string of glyphs
self.pos = pos
#The advance width of the glyph
self.w = GLYPH.width
#The difference in the ascender and the descender values
self.h = FONT.info.ascender - FONT.info.descender
#the distance between the baseline and the descender
self.b = 0 - FONT.info.descender
#the scale of the drawing
self.scale = scale
def __init__(self, glyphSet, boundingBox, creator="AICBPen"):
BasePen.__init__(self, glyphSet)
boundingBox = ' '.join([str(i) for i in boundingBox])
self._epsData = [
"%!PS-Adobe-3.0",
"%%%%Creator: %s" % creator,
"%%%%Title: %s Data" % creator,
"%%%%CreationDate: %s" % _timeStamp(),
"%%%%BoundingBox: %s" % boundingBox,
"%%EndComments",
"%%BeginProlog",
_epsDict,
"%%EndProlog",
_epsSetup,
"0 A *u 0 O 0 g",
]
self._firstPoint = None
self._currentPoint = None
def __init__(self,
glyphSet,
round_coordinates=False,
relative_coordinates=False,
optimize_output=False):
"""
A pen that converts a glyph outline to an SVG path. After drawing, SVGPen.d contains the path as string. This corresponds to the SVG path element attribute "d".
glyphSet (RFont or GSFont) The font object
round_coordinates (Boolean) Round all coordinates to integer. Default is False.
relative_coordinates (Boolean) Store all coordinates as relative. Default is False, i.e. choose whichever notation (absolute or relative) produces shorter output for each individual segment.
optimize_output (Boolean) Make the output path string as short as possible. Default is True. Setting this to False also overrides the relative_coordinates option.
"""
self._rnd = round_coordinates
self._rel = relative_coordinates
self._opt = optimize_output
self.prev_x = 0
self.prev_y = 0
BasePen.__init__(self, glyphSet)
self.d = ''
def __init__(self,
glyphSet,
angle,
width,
height,
show_nib_faces=False,
alpha=0.2,
nib_superness=2.5,
trace=False,
round_coords=False):
BasePen.__init__(self, glyphSet)
self.angle = angle
if self.angle > pi:
self.angle -= pi
elif self.angle < -pi:
self.angle += pi
# Store a transform, used for calculating extrema in some nib models
self.transform = Transform().rotate(-self.angle)
self.transform_reverse = Transform().rotate(self.angle)
self.width = width
self.height = height
self.a = 0.5 * width
self.b = 0.5 * height
self.color = show_nib_faces
self.highlight_nib_faces = False
self.alpha = alpha
self.nib_superness = nib_superness
self.trace = trace
self.round_coords = round_coords
# Initialize the nib face path
# This is only needed for more complex shapes
self.setup_nib()
self.path = []
self.__currentPoint = None
if self.color:
stroke(0, 0, 0, 0.5)
strokeWidth(0.1)
def __init__(self, glyphSet, offset=10, connection="square", cap="round", miterLimit=None, closeOpenPaths=True):
BasePen.__init__(self, glyphSet)
self.offset = abs(offset)
self._inputmiterLimit = miterLimit
if miterLimit is None:
miterLimit = self.offset
self.miterLimit = abs(miterLimit)
self.closeOpenPaths = closeOpenPaths
self.connectionCallback = getattr(self, "connection%s" %(connection[0].capitalize() + connection[1:]))
self.capCallback = getattr(self, "cap%s" %(cap[0].capitalize() + cap[1:]))
self.originalGlyph = Glyph()
self.originalPen = self.originalGlyph.getPen()
self.outerGlyph = Glyph()
self.outerPen = self.outerGlyph.getPen()
self.outerCurrentPoint = None
self.outerFirstPoint = None
self.outerPrevPoint = None
self.innerGlyph = Glyph()
self.innerPen = self.innerGlyph.getPen()
self.innerCurrentPoint = None
self.innerFirstPoint = None
self.innerPrevPoint = None
self.prevPoint = None
self.firstPoint = None
self.firstAngle = None
self.prevAngle = None
self.shouldHandleMove = True
self.drawSettings()
def addComponent(self, glyphName, transform):
if self.preserveComponents:
self.components.append((glyphName, transform))
else:
BasePen.addComponent(self, glyphName, transform)
def __init__(self, glyphSet, path):
BasePen.__init__(self, glyphSet)
self.path = path
def __init__(self, pen, glyphSet):
BasePen.__init__(self, glyphSet)
self.pen = pen
def __init__(self, glyphSet):
BasePen.__init__(self, glyphSet)
self.pen = CocoaPen(glyphSet)
self.path = self.pen.path
def __init__(self, glyphSet, testPoint, evenOdd=0): BasePen.__init__(self, glyphSet) self.setTestPoint(testPoint, evenOdd)
def addComponent(self, glyphName, transform):
if self.preserveComponents:
self.components.append((glyphName, transform))
else:
BasePen.addComponent(self, glyphName, transform)
def __init__(self, glyphSet, path):
BasePen.__init__(self, glyphSet)
self.path = path
def __init__(self, glyphSet):
BasePen.__init__(self, glyphSet)
self.d = u''
self._lastX = self._lastY = None
