def trim(self):
FreeCAD.ActiveDocument.openTransaction('Trim FB')
for target in self.targets:
for b in frameCmd.beams():
if hasattr(b,'tailOffset') and hasattr(b,'headOffset'):
edge=b.Support[0][0].Shape.getElement(b.Support[0][1][0])
ax=edge.tangentAt(0).normalize() #frameCmd.beamAx(b).normalize()
tail=edge.valueAt(0) #b.Placement.Base
head=edge.valueAt(edge.LastParameter) #tail+ax*float(b.Height)
if target.ShapeType=="Vertex":
P=target.Point
elif target.ShapeType=="Face" and not frameCmd.isOrtho(target,ax):
P=frameCmd.intersectionPlane(tail,ax,target)
elif hasattr(target,"CenterOfMass"):
P=target.CenterOfMass
else:
P=None
if P:
#print P
#print ax.Length
deltaTail=(P-tail).dot(ax)
deltaHead=(P-head).dot(ax)
#print "D-tail = %.1f; D-head = %.1f" %(deltaTail,deltaHead)
if abs(deltaTail)<abs(deltaHead):
b.tailOffset=-deltaTail
else:
b.headOffset=deltaHead
refresh()
FreeCAD.ActiveDocument.commitTransaction()
def laydownTheTube(pipe=None, refFace=None, support=None):
'''
laydownTheTube(pipe=None, refFace=None, support=None)
Makes one pipe touch one face if the center-line is parallel to it.
If support is not None, support is moved towards pipe.
'''
if not (pipe and refFace): # without argument take from selection set
refFace = [
f for f in frameCmd.faces() if type(f.Surface) == Part.Plane
][0]
pipe = [p for p in frameCmd.beams() if hasattr(p, 'OD')][0]
try:
if type(refFace.Surface) == Part.Plane and frameCmd.isOrtho(
refFace, frameCmd.beamAx(pipe)) and hasattr(pipe, 'OD'):
dist = rounded(
refFace.normalAt(0, 0).multiply(
refFace.normalAt(0, 0).dot(pipe.Placement.Base -
refFace.CenterOfMass) -
float(pipe.OD) / 2))
if support:
support.Placement.move(dist)
else:
pipe.Placement.move(dist.multiply(-1))
else:
FreeCAD.Console.PrintError(
'Face is not flat or not parallel to axis of pipe\n')
except:
FreeCAD.Console.PrintError('Wrong selection\n')
def trim(self):
FreeCAD.ActiveDocument.openTransaction('Trim FB')
for target in self.targets:
for b in frameCmd.beams():
if hasattr(b, 'tailOffset') and hasattr(b, 'headOffset'):
edge = b.Support[0][0].Shape.getElement(b.Support[0][1][0])
ax = edge.tangentAt(
0).normalize() #frameCmd.beamAx(b).normalize()
tail = edge.valueAt(0) #b.Placement.Base
head = edge.valueAt(
edge.LastParameter) #tail+ax*float(b.Height)
if target.ShapeType == "Vertex":
P = target.Point
elif target.ShapeType == "Face" and not frameCmd.isOrtho(
target, ax):
P = frameCmd.intersectionPlane(tail, ax, target)
elif hasattr(target, "CenterOfMass"):
P = target.CenterOfMass
else:
P = None
if P:
#print P
#print ax.Length
deltaTail = (P - tail).dot(ax)
deltaHead = (P - head).dot(ax)
#print "D-tail = %.1f; D-head = %.1f" %(deltaTail,deltaHead)
if abs(deltaTail) < abs(deltaHead):
b.tailOffset = -deltaTail
else:
b.headOffset = deltaHead
refresh()
FreeCAD.ActiveDocument.commitTransaction()
def addSelection(self, doc, obj, sub, pnt):
lastSel = FreeCAD.getDocument(doc).getObject(obj)
subLastSel = lastSel.Shape.getElement(sub)
if lastSel.TypeId == 'Part::FeaturePython' and hasattr(
lastSel, "Height") and subLastSel.ShapeType == "Edge":
self.edges.append(subLastSel)
self.beams.append(lastSel)
FreeCAD.Console.PrintMessage('Edge/beam pair nr.' +
str(len(self.edges)) +
' selected.\n')
if (len(self.edges) == len(self.beams) == 2):
if frameCmd.isOrtho(*self.edges):
self.beams.reverse()
FreeCAD.ActiveDocument.openTransaction('Adjust angle')
for i in range(len(self.edges)):
frameCmd.extendTheBeam(self.beams[i], self.edges[i])
FreeCAD.ActiveDocument.commitTransaction()
FreeCAD.Console.PrintWarning("Adjustment executed.\n")
else:
FreeCAD.Console.PrintError("Edges must be orthogonal.\n")
self.edges = []
self.beams = []
FreeCADGui.Selection.clearSelection()
FreeCAD.activeDocument().recompute()
FreeCAD.Console.PrintWarning("Repeat selection or press [ESC]\n")
def addSelection(self,doc,obj,sub,pnt):
lastSel=FreeCAD.getDocument(doc).getObject(obj)
subLastSel=lastSel.Shape.getElement(sub)
if lastSel.TypeId=='Part::FeaturePython' and hasattr(lastSel,"Height") and subLastSel.ShapeType=="Edge":
self.edges.append(subLastSel)
self.beams.append(lastSel)
FreeCAD.Console.PrintMessage('Edge/beam pair nr.'+str(len(self.edges))+' selected.\n')
if (len(self.edges)==len(self.beams)==2):
if frameCmd.isOrtho(*self.edges):
self.beams.reverse()
FreeCAD.ActiveDocument.openTransaction('Adjust angle')
for i in range(len(self.edges)):
frameCmd.extendTheBeam(self.beams[i],self.edges[i])
FreeCAD.ActiveDocument.commitTransaction()
FreeCAD.Console.PrintWarning("Adjustment executed.\n")
else:
FreeCAD.Console.PrintError("Edges must be orthogonal.\n")
self.edges=[]
self.beams=[]
FreeCADGui.Selection.clearSelection()
FreeCAD.activeDocument().recompute()
FreeCAD.Console.PrintWarning("Repeat selection or press [ESC]\n")