table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 12
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1000)
# --- Instruction: 'Apply-actions'
# Action: 'Drop'
instruction = Instruction(instruction_order=0)
action = DropAction(order=0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv4 Source Address
match = Match()
match.set_eth_type(eth_type)
match.set_ipv4_src(ipv4_src)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
action = OutputAction(order = 0, port = "NORMAL")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# IP ECN
# UDP Source Port Number
# UDP Destination Port Number
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_udp_src_port(udp_src_port)
match.set_udp_dst_port(udp_dst_port)
match.set_in_port(in_port = input_port)
flow_entry.add_match(match)
print ("\n")
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(6001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(12000)
flow_entry.set_flow_hard_timeout(12000)
flow_entry.set_flow_priority(1000)
instruction = Instruction(instruction_order=0)
action = DropAction(order=0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_ARP)
match.set_eth_src("00:11:22:33:44:55")
match.set_eth_dst("aa:bb:cc:dd:ee:ff")
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(7001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(2400)
flow_entry.set_flow_hard_timeout(2400)
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetNwTosAction(action_order)
action.set_tos(mod_nw_tos)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_ip_eth_type)
match.set_ipv4_dst(match_ipv4_dst)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
# 'Output'
instruction = Instruction(instruction_order=0)
action = PushMplsHeaderAction(order=0)
action.set_eth_type(push_ether_type)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_mpls_label(mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# IPv4 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_ipv4_dst(ipv4_dst)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry .add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IP protocol number (TCP)
# IP DSCP
# TCP Source Port
# TCP Destination Port
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ipv6_flabel(ipv6_flabel)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_tcp_src_port(tcp_src_port)
match.set_tcp_dst_port(tcp_dst_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
instruction = Instruction(instruction_order = 0)
action = PushVlanHeaderAction(order = 0)
action.set_eth_type(eth_type = push_eth_type)
instruction.add_apply_action(action)
action = SetFieldAction(order = 1)
action.set_vlan_id(vid = push_vlan_id)
instruction.add_apply_action(action)
action = OutputAction(order = 2, port = output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_in_port(in_port = input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
action = PushVlanHeaderAction(action_order)
action.set_eth_type(dot1q_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(customer_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, provider_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
match = Match()
match.set_eth_type(arp_eth_type)
match.set_vlan_id(customer_vlan_id)
match.set_in_port(in_port = customer_port)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IP protocol number (ICMPv6)
# ICMPv6 Type
# ICMPv6 Code
# Metadata
match = Match()
match.set_eth_type(eth_type)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ipv6_flabel(ipv6_flabel)
match.set_ip_proto(ip_proto)
match.set_icmpv6_type(icmpv6_type)
match.set_icmpv6_code(icmpv6_code)
match.set_metadata(metadata)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IPv6 Extension Header
# IP protocol number (TCP)
# TCP Source Port
# TCP Destination Port
# Metadata
match = Match()
match.set_eth_type(eth_type)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ipv6_flabel(ipv6_flabel)
match.set_ipv6_exh_hdr(ipv6_exthdr)
match.set_ip_proto(ip_proto)
match.set_tcp_src_port(tcp_src_port)
match.set_tcp_dst_port(tcp_dst_port)
match.set_metadata(metadata)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
instruction = Instruction(instruction_order=0)
action = PushVlanHeaderAction(order=0)
action.set_eth_type(eth_type=push_eth_type)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_vlan_id(vid=push_vlan_id)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_vlan_id(vlan_id)
match.set_in_port(in_port=input_port)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IPv6 Extension Header
# IP protocol number (TCP)
# TCP Source Port
# TCP Destination Port
# Metadata
match = Match()
match.set_eth_type(eth_type)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ipv6_flabel(ipv6_flabel)
match.set_ipv6_exh_hdr(ipv6_exthdr)
match.set_ip_proto(ip_proto)
match.set_tcp_src_port(tcp_src_port)
match.set_tcp_dst_port(tcp_dst_port)
match.set_metadata(metadata)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(6001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(12000)
flow_entry.set_flow_hard_timeout(12000)
flow_entry.set_flow_priority(1000)
instruction = Instruction(instruction_order = 0)
action = DropAction(order = 0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_ARP)
match.set_eth_src("00:11:22:33:44:55")
match.set_eth_dst("aa:bb:cc:dd:ee:ff")
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(7001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(2400)
flow_entry.set_flow_hard_timeout(2400)
instruction = Instruction(instruction_order = 0)
action = PushVlanHeaderAction(order = 0)
action.set_eth_type(eth_type = push_eth_type)
instruction.add_apply_action(action)
action = SetFieldAction(order = 1)
action.set_vlan_id(vid = push_vlan_id)
instruction.add_apply_action(action)
action = OutputAction(order = 2, port = output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_vlan_id(vlan_id)
match.set_in_port(in_port = input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
else:
instruction = Instruction(instruction_order = 0)
action_order = 0
action = SetNwTosAction(action_order)
action.set_tos(mod_nw_tos)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_ip_eth_type)
match.set_ipv4_dst(match_ipv4_dst)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
# --- Instruction: 'Apply-actions'
# Action: 'Output' to CONTROLLER
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER", max_len=60)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_in_port(input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 12
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1000)
# --- Instruction: 'Apply-actions'
# Action: 'Drop'
instruction = Instruction(instruction_order = 0)
action = DropAction(order = 0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv4 Source Address
match = Match()
match.set_eth_type(eth_type)
match.set_ipv4_src(ipv4_src)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order = 0)
action = OutputAction(order = 0, port = output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
# IP protocol number (UDP)
# IP DSCP
# UDP Source Port
# UDP Destination Port
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_udp_src_port(udp_src_port)
match.set_udp_dst_port(udp_dst_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
# --- Instruction: 'Apply-actions'
# Action: 'Output' to CONTROLLER
instruction = Instruction(instruction_order = 0)
action = OutputAction(order = 0, port = "CONTROLLER", max_len=60)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_in_port(input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
action = OutputAction(order=0, port="NORMAL")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# IP ECN
# ICMPv4 Type
# ICMPv4 Code
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_icmpv4_type(icmpv4_type)
match.set_icmpv4_code(icmpv4_code)
match.set_in_port(input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
flow_entry.set_flow_table_id(table_id)
flow_id = 14
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1000)
# --- Instruction: 'Apply-actions'
# Action: 'Drop'
instruction = Instruction(instruction_order = 0)
action = DropAction(order = 0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
else:
# --- Instruction: 'Apply-actions'
# Actions: 'Pop MPLS Header'
# 'Output'
instruction = Instruction(instruction_order = 0)
action = PopMplsHeaderAction(order = 0)
action.set_eth_type(pop_ether_type)
instruction.add_apply_action(action)
action = OutputAction(order = 1, port = output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# MPLS Label
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_mpls_label(mpls_label)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
else:
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(1011)
# --- Instruction: 'Apply-actions'
# Action: 'Output' to port 7
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=7)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# VLAN ID
# VLAN PCP
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_vlan_id(vlan_id)
match.set_vlan_pcp(vlan_pcp)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print("<<< Flow successfully added to the Controller")
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(1011)
# --- Instruction: 'Apply-actions'
# Action: 'Output' to port 7
instruction = Instruction(instruction_order = 0)
action = OutputAction(order = 0, port = 7)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# VLAN ID
# VLAN PCP
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_vlan_id(vlan_id)
match.set_vlan_pcp(vlan_pcp)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 11
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1000)
# --- Instruction: 'Apply-actions'
# Action: 'Drop'
instruction = Instruction(instruction_order = 0)
action = DropAction(order = 0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv4 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_ipv4_dst(ipv4_dst)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
flow_entry.set_flow_priority(flow_priority=1005)
# --- Instruction: 'Apply-actions'
# Action: 'Output' to CONTROLLER
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER", max_len=60)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
#--- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_in_port(input_port)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK) == True):
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IP protocol number (ICMPv6)
# ICMPv6 Type
# ICMPv6 Code
# Metadata
match = Match()
match.set_eth_type(eth_type)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ipv6_flabel(ipv6_flabel)
match.set_ip_proto(ip_proto)
match.set_icmpv6_type(icmpv6_type)
match.set_icmpv6_code(icmpv6_code)
match.set_metadata(metadata)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
# --- Instruction: 'Apply-actions'
# Action: 'Output' CONTROLLER
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# ARP Operation
# ARP Source IPv4 Address
# ARP Target IPv4 Address
# ARP Source Hardware Address
# ARP Target Hardware Address
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_arp_opcode(arp_opcode)
match.set_arp_src_transport_address(arp_src_ipv4_addr)
match.set_arp_tgt_transport_address(arp_tgt_ipv4_addr)
match.set_arp_src_hw_address(arp_src_hw_addr)
match.set_arp_tgt_hw_address(arp_tgt_hw_addr)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 11
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1000)
# --- Instruction: 'Apply-actions'
# Action: 'Drop'
instruction = Instruction(instruction_order=0)
action = DropAction(order=0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv4 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_ipv4_dst(ipv4_dst)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
flow_entry.set_flow_cookie(cookie = 408)
flow_entry.set_flow_cookie_mask(cookie_mask = 255)
flow_entry.set_flow_hard_timeout(hard_timeout = 3400)
flow_entry.set_flow_idle_timeout(idle_timeout = 3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order = 0)
action = OutputAction(order = 0, port = output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
else:
flow_entry.set_flow_cookie(cookie=408)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
# IP protocol number (UDP)
# IP DSCP
# UDP Source Port
# UDP Destination Port
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_udp_src_port(udp_src_port)
match.set_udp_dst_port(udp_dst_port)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
# --- Instruction: 'Apply-actions'
# Action: 'Output' CONTROLLER
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# ARP Operation
# ARP Source IPv4 Address
# ARP Target IPv4 Address
# ARP Source Hardware Address
# ARP Target Hardware Address
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_arp_opcode(arp_opcode)
match.set_arp_src_transport_address(arp_src_ipv4_addr)
match.set_arp_tgt_transport_address(arp_tgt_ipv4_addr)
match.set_arp_src_hw_address(arp_src_hw_addr)
match.set_arp_tgt_hw_address(arp_tgt_hw_addr)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
# --- Instruction: 'Apply-actions'
# Actions: 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = SetFieldAction(order=0)
action.set_mpls_label(new_mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=2)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# MPLS Label
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_mpls_label(mpls_label)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IP protocol number (TCP)
# IP DSCP
# TCP Source Port
# TCP Destination Port
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ipv6_flabel(ipv6_flabel)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_tcp_src_port(tcp_src_port)
match.set_tcp_dst_port(tcp_dst_port)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
