def updateDIYs(user_id, dev_id):
if user_id == 'empty' or dev_id == 'empty':
LOG.writeLn("user_id or dev_id is empty")
exit()
phpFileNm = "call_from_DIYs.php"
fileName = COM.gJsonDir + 'device.json'
f = open(fileName, 'r')
data = f.read()
print(data)
f.close()
url = 'https://frogmon.synology.me/svr_api/'
url = '%s%s' % (url, phpFileNm)
r = requests.post(url,
data={
'user_id': user_id,
'product_id': dev_id,
'status_json': data
})
print(r.url)
if (XMLPaser.getHeader(r.content) != 0):
LOG.writeLn("sendModuleStat send Error ")
else:
actionJson = XMLPaser.decodeAction(r.content)
if actionJson == '':
print('no Actions')
else:
GLOB.saveJsonData(COM.gJsonDir + 'action.json', actionJson)
def confUpdate(self):
self.sleep_period = int(
GLOB.readConfig(configFileNM, 'FLOWERCARE', 'period', '300'))
self.miflora_cache_timeout = self.sleep_period - 1
self.used_adapter = GLOB.readConfig(configFileNM, 'FLOWERCARE',
'adapter', 'hci0')
self.reporting_mode = 'json'
self.daemon_enabled = True
self.user_id = GLOB.readConfig(configFileNM, 'SETUP', 'user_id', '0')
self.device_id = GLOB.readConfig(configFileNM, 'AGENT', 'id', '0')
self.default_base_topic = 'miflora'
self.local_id = GLOB.readConfig(configFileNM, 'WEATHER', 'location0',
'')
# Check configuration
if self.reporting_mode not in [
'mqtt-json', 'mqtt-homie', 'json', 'mqtt-smarthome',
'homeassistant-mqtt', 'thingsboard-json', 'wirenboard-mqtt'
]:
LOG.writeLn(
'Configuration parameter reporting_mode set to an invalid value '
)
sys.exit(1)
if (self.device_id == '0' or self.user_id == '0'):
LOG.writeLn('setup.ini file load error')
sys.exit(1)
#LOG.writeLn('Configuration accepted')
print('** USER = %s' % self.user_id)
print('** PRODUCT = %s' % self.device_id)
print('** interval = %d' % self.sleep_period)
print('** location = %s' % self.local_id)
print('--------------------------------------------------')
print('')
def chkSensor(self):
for [name, mac] in GLOB.itemConfig(configFileNM, 'DEVICE'):
if not GLOB.isMacAddress(mac):
LOG.writeLn(
'The MAC address "{}" seems to be in the wrong format. Please check your configuration'
)
sys.exit(1)
if '@' in name:
name_pretty, location_pretty = name.split('@')
else:
name_pretty, location_pretty = name, ''
name_clean = GLOB.clean_identifier(name_pretty)
location_clean = GLOB.clean_identifier(location_pretty)
flora = dict()
print('Adding sensor to device list and testing connection ...')
print('Name: "{}"'.format(name_pretty))
#print_line('Attempting initial connection to Mi Flora sensor "{}" ({})'.format(name_pretty, mac), console=False, sd_notify=True)
flora_poller = MiFloraPoller(
mac=mac,
backend=GatttoolBackend,
cache_timeout=self.miflora_cache_timeout,
retries=3,
adapter=self.used_adapter)
flora['poller'] = flora_poller
flora['name_pretty'] = name_pretty
flora['mac'] = flora_poller._mac
flora['refresh'] = self.sleep_period
flora['location_clean'] = location_clean
flora['location_pretty'] = location_pretty
flora['stats'] = {"count": 0, "success": 0, "failure": 0}
try:
flora_poller.fill_cache()
flora_poller.parameter_value(MI_LIGHT)
flora['firmware'] = flora_poller.firmware_version()
except (IOError, BluetoothBackendException):
LOG.writeLn(
'Initial connection to Mi Flora sensor "{}" ({}) failed.')
else:
print('Internal name: "{}"'.format(name_clean))
print('Device name: "{}"'.format(flora_poller.name()))
print('MAC address: {}'.format(flora_poller._mac))
print('Firmware: {}'.format(flora_poller.firmware_version()))
#LOG.writeLn('Initial connection to Mi Flora sensor "{}" ({}) successful')
print()
self.flores[name_clean] = flora
return self.flores
def encodeStatJson(self, fileNM, data):
rc = -1
try:
dict = json.loads('{}')
dict['DEV_ID'] = data[0]
dict['MODE'] = data[1]
dict['ALARM'] = data[2]
dict['TEMP'] = data[3]
dict['HUMI'] = data[4]
dict['MOIST'] = data[5]
dict['COND'] = data[6]
dict['CDS'] = data[7]
dict['BATTERY'] = data[8]
dict['REMOTE'] = data[9]
dict['LIGHT'] = data[10]
dict['PUMP'] = data[11]
dict['FAN'] = data[12]
dict['HEATER'] = data[13]
dict['LASTUPDT'] = data[14]
dict['TEAMVIEWER'] = data[15]
dict['LOCAL_IP'] = GLOB.get_ip_address()
print(json.dumps(dict, ensure_ascii=False, indent="\t"))
#os.remove(fileNM)
with open(fileNM, 'w', encoding='utf-8') as make_file:
json.dump(dict, make_file, ensure_ascii=False, indent="\t")
print("out values [%s,%s,%s,%s,%s]" %
(data[9], data[10], data[11], data[12], data[13]))
rc = 0
except Exception as e:
LOG.writeLn("[ERROR]: %s" % e)
return rc
def copyFileList(srcPath, destPath):
print("copyFileList (%s=>%s)" % (srcPath, destPath))
if not GLOB.folderExitst(srcPath):
return False
try:
files = os.listdir(destPath)
print(files)
for afile in files:
os.remove(destPath + afile)
files = os.listdir(srcPath)
for afile in files:
shutil.copy(srcPath + afile, destPath + afile)
return True
except Exception as e:
LOG.writeLn("[face_copy ERROR]: %s" % e)
return False
def makeJson():
data = {}
data['DEV_ID'] = mProduct_id
data['VERSION'] = mVersion
data['INTERVAL'] = mInterval_sec
data['RES_X'] = mResolution_x
data['RES_Y'] = mResolution_y
data['ROTATION'] = mRotation
data['START_TIME'] = mStart_time
data['END_TIME'] = mEnd_time
data['DAY_COUNT'] = mCount
data['LOCAL_IP'] = GLOB.get_ip_address()
LOG.writeLn('json file save:%s' % COM.gJsonDir + 'device.json')
with open(COM.gJsonDir + 'device.json', 'w',
encoding='utf-8') as make_file:
json.dump(data, make_file, indent="\t")
def jsonAppend(fileNM, name):
rc = -1
try:
if GLOB.fileExist(fileNM):
with open(fileNM, 'a', encoding='utf-8') as f:
data = ', {"DOOR_OPEN_TIME" : "%s", "NAME" : "%s" }' % (
COM.gstrYMDHMS, name)
f.write(data)
else:
with open(fileNM, 'w', encoding='utf-8') as f:
data = '{"DOOR_OPEN_TIME" : "%s", "NAME" : "%s" }' % (
COM.gstrYMDHMS, name)
f.write(data)
rc = 0
except Exception as e:
LOG.writeLn("[jsonAppend ERROR]: %s" % e)
return rc
def on_message(client, userdata, msg):
strJson = msg.payload.decode()
LOG.writeLn("[MQTT] " + msg.topic + " " + strJson) #토픽과 메세지를 출력한다.
try:
if GLOB.saveJsonData(COM.gJsonDir + "action.json", strJson) == 0:
remote = '0'
grp1 = GLOB.getJsonVal(strJson, 'interval', '0')
if (grp1 != '0'):
GLOB.writeConfig(configFileNM, 'SETUP', 'interval', grp1)
remote = '1'
grp2 = GLOB.getJsonVal(strJson, 'resolution_x', '0')
if (grp2 != '0'):
GLOB.writeConfig(configFileNM, 'SETUP', 'resolution_x', grp2)
remote = '1'
grp3 = GLOB.getJsonVal(strJson, 'resolution_y', '0')
if (grp3 != '0'):
GLOB.writeConfig(configFileNM, 'SETUP', 'resolution_y', grp3)
remote = '1'
grp4 = GLOB.getJsonVal(strJson, 'rotation', '99')
if (grp4 != '99'):
GLOB.writeConfig(configFileNM, 'SETUP', 'rotation', grp4)
remote = '1'
grp5 = GLOB.getJsonVal(strJson, 'start_time', '99')
if (grp5 != '99'):
GLOB.writeConfig(configFileNM, 'SETUP', 'start_time', grp5)
remote = '1'
grp6 = GLOB.getJsonVal(strJson, 'end_time', '99')
if (grp6 != '99'):
GLOB.writeConfig(configFileNM, 'SETUP', 'end_time', grp6)
remote = '1'
print('grps = %s %s %s %s %s %s [%s]' %
(grp1, grp2, grp3, grp4, grp5, grp6, remote))
if remote == '1':
if GLOB.appendTIMELAPsControlInfo(
COM.gJsonDir + "device.json",
GLOB.readConfig(configFileNM, 'SETUP', 'interval',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'resolution_x',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'resolution_y',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'rotation',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'start_time',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'end_time',
'0')) == 0:
REQUEST.updateDIYs(user_id, dev_id)
LOG.writeLn("[MQTT] Command recive and reboot in 3 sec")
time.sleep(3)
GLOB.run_command("sudo reboot")
except Exception as e:
LOG.writeLn("[MQTT] : error : %s" % e)
exit()
import sys, os
import time
import datetime
import glob
import subprocess
import shutil
from frogmon.uConfig import CONF
from frogmon.uLogger import LOG
from frogmon.uCommon import COM
from frogmon.uGlobal import GLOB
# 프로그램 시작
GLOB.directoryInit(GLOB.whoami(), "DOORs")
configFileNM = COM.gHomeDir + COM.gSetupFile
controlFileNM = COM.gHomeDir + COM.gControlFile
user_id = GLOB.readConfig(configFileNM, 'SETUP', 'user_id', '0')
dev_id = GLOB.readConfig(configFileNM, 'AGENT', 'id', '0')
# 함수 정의
mWhoami = GLOB.whoami()
mUsbDir = "/mnt/usb_stick"
mFaceDir = COM.gHomeDir + "faces/"
GLOB.folderMaker(mFaceDir)
print("whoami = %s" % mWhoami)
# uLogger.py
#-*- coding:utf-8 -*-
import sys
import logging
import logging.handlers
import sdnotify
from frogmon.uCommon import COM
from frogmon.uGlobal import GLOB
from unidecode import unidecode
from colorama import Fore, Back, Style
GLOB.folderMaker(COM.gLogDir)
#logger instance create
logger = logging.getLogger(__name__)
#logger formatter create
formatter = logging.Formatter('[%(asctime)s] %(message)s')
#handler create (stream, file)
streamHandler = logging.StreamHandler()
fileHandler = logging.FileHandler(COM.gLogDir + 'syslog_%s.log' % COM.gstrYMD)
#logger instance에 fomatter create
streamHandler.setFormatter(formatter)
fileHandler.setFormatter(formatter)
#logger instance에 handler create
logger.addHandler(streamHandler)
logger.addHandler(fileHandler)
#Log Level Setting
STAT_FAN = 0
STAT_HEATER = 0
cntLoadError = 0
def clearControlFile():
GLOB.writeConfig(controlFileNM, 'CONTROL', 'light' , '0')
GLOB.writeConfig(controlFileNM, 'CONTROL', 'pump' , '0')
GLOB.writeConfig(controlFileNM, 'CONTROL', 'fan' , '0')
GLOB.writeConfig(controlFileNM, 'CONTROL', 'heater', '0')
try:
GPIO.output(LIGHT, GPIO.HIGH)
time.sleep(1)
LOG.writeLn("[CONTROL] : h/w Control Start %s" % GLOB.readConfig(configFileNM, 'AGENT', 'id', '0'))
while (True):
time.sleep(1)
try:
STAT_LIGHT = int(GLOB.readConfig(controlFileNM, 'CONTROL', 'light' , '99')) #0:ON/OFF, 1: LED 켜기, 0: LED 끄기
STAT_PUMP = int(GLOB.readConfig(controlFileNM, 'CONTROL', 'pump' , '99')) #0:ON/OFF, 1: PUMP 켜기, 0: PUMP 끄기
STAT_FAN = int(GLOB.readConfig(controlFileNM, 'CONTROL', 'fan' , '99')) #0:ON/OFF, 1: FAN 켜기, 0: FAN 끄기
STAT_HEATER = int(GLOB.readConfig(controlFileNM, 'CONTROL', 'heater', '99')) #0:ON/OFF, 1: HEATER 켜기, 0: HEATER 끄기
if (max(STAT_LIGHT, STAT_PUMP, STAT_FAN, STAT_HEATER) == 99):
LOG.writeLn("[CONTROL] : config load error then continues")
cntLoadError = cntLoadError + 1
if (cntLoadError > 10) :
clearControlFile()
data['RES_Y'] = mResolution_y
data['ROTATION'] = mRotation
data['START_TIME'] = mStart_time
data['END_TIME'] = mEnd_time
data['DAY_COUNT'] = mCount
data['LOCAL_IP'] = GLOB.get_ip_address()
LOG.writeLn('json file save:%s' % COM.gJsonDir + 'device.json')
with open(COM.gJsonDir + 'device.json', 'w',
encoding='utf-8') as make_file:
json.dump(data, make_file, indent="\t")
# init
configFileNM = COM.gHomeDir + COM.gSetupFile
mUser_id = GLOB.readConfig(configFileNM, 'SETUP', 'user_id', 'empty')
mProduct_id = GLOB.readConfig(configFileNM, 'SETUP', 'product_id', 'empty')
mVersion = GLOB.readConfig(configFileNM, 'SETUP', 'version', 'ver 1.0')
mInterval_sec = int(GLOB.readConfig(configFileNM, 'SETUP', 'interval', '600'))
mResolution_x = int(
GLOB.readConfig(configFileNM, 'SETUP', 'resolution_x', '640'))
mResolution_y = int(
GLOB.readConfig(configFileNM, 'SETUP', 'resolution_y', '480'))
mRotation = int(GLOB.readConfig(configFileNM, 'SETUP', 'rotation', '0'))
mStart_time = int(GLOB.readConfig(configFileNM, 'SETUP', 'start_time', '0'))
mEnd_time = int(GLOB.readConfig(configFileNM, 'SETUP', 'end_time', '23'))
mCount = 0
GLOB.setUpdateTime()
makeJson()
def atOnce(self):
self.chkSensor()
GLOB.setUpdateTime()
self.confUpdate()
for [flora_name, flora] in self.flores.items():
data = dict()
attempts = 2
flora['poller']._cache = None
flora['poller']._last_read = None
flora['stats']['count'] = flora['stats']['count'] + 1
#print_line('Retrieving data from sensor "{}" ...'.format(flora['name_pretty']))
while attempts != 0 and not flora['poller']._cache:
try:
flora['poller'].fill_cache()
flora['poller'].parameter_value(MI_LIGHT)
except (IOError, BluetoothBackendException):
attempts = attempts - 1
if attempts > 0:
LOG.writeLn('Retrying ...')
flora['poller']._cache = None
flora['poller']._last_read = None
if not flora['poller']._cache:
flora['stats']['failure'] = flora['stats']['failure'] + 1
LOG.writeLn(
'Failed to retrieve data from Mi Flora sensor "{}" ({}), success rate: {:.0%}'
.format(
flora['name_pretty'], flora['mac'],
flora['stats']['success'] / flora['stats']['count']))
print()
continue
else:
flora['stats']['success'] = flora['stats']['success'] + 1
for param, _ in mParameters.items():
data[param] = flora['poller'].parameter_value(param)
rc = -1
try:
data['timestamp'] = COM.gstrDATE
data['name'] = flora_name
data['name_pretty'] = flora['name_pretty']
data['mac'] = flora['mac']
data['firmware'] = flora['firmware']
#print('Data for "{}": {}'.format(flora_name, json.dumps(data)))
with open(COM.gJsonDir + flora_name + '.json',
'w',
encoding="utf-8") as make_file:
json.dump(data, make_file, ensure_ascii=False, indent="\t")
#to make device.json file
datas = []
datas.append(self.device_id)
datas.append(GLOB.readConfig(configFileNM, 'SETUP', 'mod', ''))
datas.append(
GLOB.readConfig(configFileNM, 'AGENT', 'alarm', '0'))
datas.append(str(data['temperature']))
datas.append('0')
datas.append(str(data['moisture']))
datas.append(str(data['conductivity']))
datas.append(str(data['light']))
datas.append(str(data['battery']))
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'active',
'0')) # active
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'light',
'0')) # LED 조명
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'pump',
'0')) # 워터펌프
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'fan', '0')) # 팬
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'heater',
'0')) # 히터
datas.append(COM.gstrYMDHMS)
datas.append(GLOB.loadTeamviewerID())
rc = self.encodeStatJson(COM.gJsonDir + 'device.json', datas)
if rc == 0:
LOG.writeLn(
'%s [%s] %s %s %s %s %s' %
(data['name'], data['battery'], data['temperature'],
data['moisture'], data['light'], data['conductivity'],
data['mac']))
except Exception as e:
LOG.writeLn("[ERROR][FLOWERCARE] : %s" % e)
if rc == 0:
if GLOB.appendWATERsControlInfo(
COM.gJsonDir + "device.json",
GLOB.readConfig(controlFileNM, 'CONTROL', 'active',
'0'),
GLOB.readConfig(controlFileNM, 'CONTROL', 'light',
'0'),
GLOB.readConfig(controlFileNM, 'CONTROL', 'pump', '0'),
GLOB.readConfig(controlFileNM, 'CONTROL', 'fan', '0'),
GLOB.readConfig(controlFileNM, 'CONTROL', 'heater',
'0')) == 0:
REQUEST.updateDIYs(self.user_id, self.device_id)
print("another process running!")
exit()
#프로그램 시작
import paho.mqtt.client as mqtt
from frogmon.uCommon import COM
from frogmon.uGlobal import GLOB
from frogmon.uRequest import REQUEST
from frogmon.uLogger import LOG
#from frogmon.ulogger import LOG
configFileNM = COM.gHomeDir+COM.gSetupFile
controlFileNM = COM.gHomeDir+COM.gControlFile
mSvr_addr = GLOB.readConfig(configFileNM, 'MQTT', 'host_addr', 'frogmon.synology.me')
mSvr_port = GLOB.readConfig(configFileNM, 'MQTT', 'host_port', '8359')
user_id = GLOB.readConfig(configFileNM, 'SETUP', 'user_id', '0')
dev_id = GLOB.readConfig(configFileNM, 'AGENT', 'id', '0')
mSub_nm = "DIYs/%s/%s" % (user_id, dev_id)
#mSub_nm = "%s" % (user_id)
#서버로부터 CONNTACK 응답을 받을 때 호출되는 콜백
def on_connect(client, userdata, flags, rc):
LOG.writeLn("[MQTT] Connected with result code "+str(rc))
#client.subscribe("$SYS/#")
client.subscribe("%s" % mSub_nm) #구독 "nodemcu"
#서버로부터 publish message를 받을 때 호출되는 콜백
# 중복 실행 방지
from tendo import singleton
try:
me = singleton.SingleInstance()
except:
print("another process running!")
exit()
from picamera import PiCamera
from time import sleep
from frogmon.uCommon import COM
from frogmon.uLogger import LOG
from frogmon.uGlobal import GLOB
GLOB.directoryInit('pi', "DOORs")
metrixImg = COM.gHomeDir + "metrix.png"
camera = PiCamera()
camera.resolution = (320, 180)
camera.rotation = 180
print('')
print('--------------------------------------------------')
print('** Welcome to FROGMON corp.')
print("** Let's make it together")
print("** ")
print('** Image File = %s' % metrixImg)
print('--------------------------------------------------')
print('')
def on_message(client, userdata, msg):
strJson = msg.payload.decode()
#print(msg.topic+" "+str(msg.payload)) #토픽과 메세지를 출력한다.
LOG.writeLn("[MQTT] "+ msg.topic+" "+ strJson) #토픽과 메세지를 출력한다.
try:
if GLOB.saveJsonData(COM.gJsonDir+"action.json", strJson) == 0:
remote = '0'
grp1 = GLOB.getJsonVal(strJson, 'light', '99')
if (grp1 != '99') :
GLOB.writeConfig(controlFileNM, 'CONTROL', 'light', grp1)
remote = '1'
grp2 = GLOB.getJsonVal(strJson, 'heater', '99')
if (grp2 != '99') :
GLOB.writeConfig(controlFileNM, 'CONTROL', 'heater', grp2)
remote = '1'
grp3 = GLOB.getJsonVal(strJson, 'fan', '99')
if (grp3 != '99') :
GLOB.writeConfig(controlFileNM, 'CONTROL', 'fan', grp3)
remote = '1'
grp4 = GLOB.getJsonVal(strJson, 'pump', '99')
if (grp4 != '99') :
GLOB.writeConfig(controlFileNM, 'CONTROL', 'pump', grp4)
remote = '1'
active = GLOB.getJsonVal(strJson, 'active', '99')
if (active != '99') :
remote = active
GLOB.writeConfig(controlFileNM, 'CONTROL', 'active', remote)
#print("grp data %s %s" % (grp1, grp2))
if GLOB.appendWATERsControlInfo(COM.gJsonDir+"device.json", GLOB.readConfig(controlFileNM, 'CONTROL', 'active', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'light', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'pump', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'fan', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'heater', '0')
) == 0 :
REQUEST.updateDIYs(user_id, dev_id)
except Exception as e :
LOG.writeLn("[MQTT] : error : %s" % e)
COM.gstrYMDHMS, name)
f.write(data)
else:
with open(fileNM, 'w', encoding='utf-8') as f:
data = '{"DOOR_OPEN_TIME" : "%s", "NAME" : "%s" }' % (
COM.gstrYMDHMS, name)
f.write(data)
rc = 0
except Exception as e:
LOG.writeLn("[jsonAppend ERROR]: %s" % e)
return rc
# 프로그램 시작
GLOB.directoryInit('pi', "DOORs")
path = COM.gHomeDir + "faces/"
faceLogPath = COM.gHomeDir + "facelog/"
metrixImg = COM.gHomeDir + "metrix.png"
GLOB.folderMaker(path)
GLOB.folderMaker(faceLogPath)
GLOB.folderMaker(COM.gJsonDir)
#from frogmon.ulogger import LOG
configFileNM = COM.gHomeDir + COM.gSetupFile
controlFileNM = COM.gHomeDir + COM.gControlFile
user_id = GLOB.readConfig(configFileNM, 'SETUP', 'user_id', '0')
dev_id = GLOB.readConfig(configFileNM, 'AGENT', 'id', '0')
def clearControlFile(): GLOB.writeConfig(controlFileNM, 'CONTROL', 'light' , '0') GLOB.writeConfig(controlFileNM, 'CONTROL', 'pump' , '0') GLOB.writeConfig(controlFileNM, 'CONTROL', 'fan' , '0') GLOB.writeConfig(controlFileNM, 'CONTROL', 'heater', '0')
def __init__(self, params):
DefaultDelegate.__init__(self)
#func is caled on notifications
def handleNotification(self, cHandle, data):
print("Notification : " + data.decode("utf-8"))
#############################################
# Main starts here
#############################################
scanner = Scanner().withDelegate(ScanDelegate())
devices = scanner.scan(10.0)
cnt = 0
dev_str=''
if not GLOB.iniSectionRemove(configFileNM, 'DEVICE'):
print('ini Section Delete Error ')
if not GLOB.iniSectionAdd(configFileNM, 'DEVICE'):
print('ini Section Add Error ')
for dev in devices:
#print("Device %s (%s), RSSI=%d dB" % (dev.addr, dev.addrType, dev.rssi))
for (adtype, desc, value) in dev.getScanData():
# Check iBeacon UUID
# 255 is manufacturer data (1 is Flags, 9 is Name)
#print(" (AD Type=%d) %s = %s" % (adtype, desc, value))
if adtype is 2 and TARGET_UUID in value:
cnt = cnt+1
target_dev = dev
print("%d) Device %s (%s), RSSI=%d dB" % (cnt, dev.addr, dev.addrType, dev.rssi))