Пример #1
0
def enumerate_device_serials(vid=FT232H_VID, pid=FT232H_PID):
    """Return a list of all FT232H device serial numbers connected to the
    machine.  You can use these serial numbers to open a specific FT232H device
    by passing it to the FT232H initializer's serial parameter.
    """
    try:
        # Create a libftdi context.
        ctx = None
        ctx = ftdi.new()
        # Enumerate FTDI devices.
        device_list = None
        count, device_list = ftdi.usb_find_all(ctx, vid, pid)
        if count < 0:
            raise RuntimeError('ftdi_usb_find_all returned error {0}: {1}'.format(count, ftdi.get_error_string(self._ctx)))
        # Walk through list of devices and assemble list of serial numbers.
        devices = []
        while device_list is not None:
            # Get USB device strings and add serial to list of devices.
            ret, manufacturer, description, serial = ftdi.usb_get_strings(ctx, device_list.dev, 256, 256, 256)
            if serial is not None:
                devices.append(serial)
            device_list = device_list.next
        return devices
    finally:
        # Make sure to clean up list and context when done.
        if device_list is not None:
            ftdi.list_free(device_list)
        if ctx is not None:
            ftdi.free(ctx)
Пример #2
0
def enumerate_device_serials(vid=FT232H_VID, pid=FT232H_PID):
    """Return a list of all FT232H device serial numbers connected to the
    machine.  You can use these serial numbers to open a specific FT232H device
    by passing it to the FT232H initializer's serial parameter.
    """
    try:
        # Create a libftdi context.
        ctx = None
        ctx = ftdi.new()
        # Enumerate FTDI devices.
        device_list = None
        count, device_list = ftdi.usb_find_all(ctx, vid, pid)
        if count < 0:
            raise RuntimeError('ftdi_usb_find_all returned error {0}: {1}'.format(count, ftdi.get_error_string(self._ctx)))
        # Walk through list of devices and assemble list of serial numbers.
        devices = []
        while device_list is not None:
            # Get USB device strings and add serial to list of devices.
            ret, manufacturer, description, serial = ftdi.usb_get_strings(ctx, device_list.dev, 256, 256, 256)
            if serial is not None:
                devices.append(serial)
            device_list = device_list.next
        return devices
    finally:
        # Make sure to clean up list and context when done.
        if device_list is not None:
            ftdi.list_free(device_list)
        if ctx is not None:
            ftdi.free(ctx)
Пример #3
0
 def __init__(self, vid=FT232H_VID, pid=FT232H_PID, serial=None):
     """Create a FT232H object.  Will search for the first available FT232H
     device with the specified USB vendor ID and product ID (defaults to
     FT232H default VID & PID).  Can also specify an optional serial number
     string to open an explicit FT232H device given its serial number.  See
     the FT232H.enumerate_device_serials() function to see how to list all
     connected device serial numbers.
     """
     # Initialize FTDI device connection.
     self._ctx = ftdi.new()
     if self._ctx == 0:
         raise RuntimeError('ftdi_new failed! Is libftdi1 installed?')
     # Register handler to close and cleanup FTDI context on program exit.
     atexit.register(self.close)
     if serial is None:
         # Open USB connection for specified VID and PID if no serial is specified.
         self._check(ftdi.usb_open, vid, pid)
     else:
         # Open USB connection for VID, PID, serial.
         ##self._check(ftdi.usb_open_string, 's:{0}:{1}:{2}'.format(vid, pid, serial))
         
         finaldev = None
         device_list = None
         count, device_list = ftdi.usb_find_all(self._ctx, vid, pid)
         if count < 0:
             raise RuntimeError('ftdi_usb_find_all returned error {0}: {1}'.format(count, ftdi.get_error_string(self._ctx)))
         # Walk through list of devices and assemble list of serial numbers.
         devices = []
         while device_list is not None:
             # Get USB device strings and add serial to list of devices.
             ret, manufacturer, description, serialtest = ftdi.usb_get_strings(self._ctx, device_list.dev, 256, 256, 256)
             if serialtest == serial:
                 finaldev = device_list.dev
             device_list = device_list.next
         if finaldev is None:
             raise RuntimeError('Could not find correct device')
         self._check(ftdi.usb_open_dev, finaldev)
             #
             
     # Reset device.
     self._check(ftdi.usb_reset)
     # Disable flow control. Commented out because it is unclear if this is necessary.
     #self._check(ftdi.setflowctrl, ftdi.SIO_DISABLE_FLOW_CTRL)
     # Change read & write buffers to maximum size, 65535 bytes.
     self._check(ftdi.read_data_set_chunksize, 65535)
     self._check(ftdi.write_data_set_chunksize, 65535)
     # Clear pending read data & write buffers.
     self._check(ftdi.usb_purge_buffers)
     # Enable MPSSE and syncronize communication with device.
     self._mpsse_enable()
     self._mpsse_sync()
     # Initialize all GPIO as inputs.
     self._write('\x80\x00\x00\x82\x00\x00')
     self._direction = 0x0000
     self._level = 0x0000
Пример #4
0
	def __init__(self, num_pixels, num_rows):
		# Create a libftdi context.
		ctx = None
		ctx = ftdi.new()
		# Define USB vendor and product ID
		vid = 0x0403
		pid = 0x6014
		# Enumerate FTDI devices.
		self.serial = None
		device_list = None
		count, device_list = ftdi.usb_find_all(ctx, vid, pid)
		while device_list is not None:
			# Get USB device strings and add serial to list of devices.
			ret, manufacturer, description, serial = ftdi.usb_get_strings(ctx, device_list.dev, 256, 256, 256)
			print 'return: {0}, manufacturer: {1}, description: {2}, serial: |{3}|'.format(ret,manufacturer,description,serial)
			if 'FTDI' in manufacturer and 'Serial' in description and 'FT' in serial:
				self.serial = serial
			device_list = device_list.next
		# Make sure to clean up list and context when done.
		if device_list is not None:
			ftdi.list_free(device_list)
		if ctx is not None:
			ftdi.free(ctx)	
		
		# Create an FT232H object.
		self.ft232h = FT232H.FT232H(serial=self.serial)
		# Create an FT232H object.
		self.ft232h = FT232H.FT232H()
		# Create a SPI interface for the FT232H object.  Set the SPI bus to 6mhz.
		self.spi    = FT232H.SPI(self.ft232h, max_speed_hz=SPI_BAUD)
		# Create a pixel data buffer and lookup table.
		self.buffer = bytearray(num_pixels*BYTES_PER_PIXEL*3)
		self.lookup = self.build_byte_lookup()
		#print self.lookup
		self.set_brightness(MAX_INTENSITY/2) #set brightness to 25% by default
		self.num_pixels	= num_pixels
		self.rows 		= num_rows
		self.cols 		= num_pixels/num_rows
Пример #5
0
    os._exit(1)

# try to list ftdi devices 0x6010 or 0x6001
ret, devlist = ftdi.usb_find_all(ftdic, UM232H_B_VID, UM232H_B_PID)
if ret <= 0:
    ret, devlist = ftdi.usb_find_all(ftdic, 0x0403, 0x6001)

if ret < 0:
    print('ftdi_usb_find_all failed: %d (%s)' %
          (ret, ftdi.get_error_string(ftdic)))
    os._exit(1)
print('Number of FTDI devices found: %d\n' % ret)
curnode = devlist
i = 0
while (curnode != None):
    ret, manufacturer, description, serial = ftdi.usb_get_strings(
        ftdic, curnode.dev)
    if ret < 0:
        print('ftdi_usb_get_strings failed: %d (%s)' %
              (ret, ftdi.get_error_string(ftdic)))
        os._exit(1)
    print('Device #%d: manufacturer="%s" description="%s" serial="%s"\n' %
          (i, manufacturer, description, serial))
    curnode = curnode.next
    i += 1

# open usb
ret = ftdi.usb_open(ftdic, UM232H_B_VID, UM232H_B_PID)
if ret < 0:
    print('unable to open ftdi device: %d (%s)' %
          (ret, ftdi.get_error_string(ftdic)))
    os._exit(1)
Пример #6
0
  # Allocate and inialize an ftdi context.
  ftdic = ftdi.new()
  if ftdic == 0:
    raise ErrorMsg('ftdi.new() failed')

  # List all the FT230X devices.
  nDevices, devlist = ftdi.usb_find_all(ftdic, 0x0403, 0x6015)
  if nDevices < 0:
    raise ErrorMsg('ftdi.usb_find_all error = %s' % ftdi.get_error_string(ftdic))
  elif nDevices == 0:
    raise ErrorMsg('No FT230X devices found')
  elif nDevices != 1:
    raise ErrorMsg('More than one FT230X device found')

  # Display the identified single FT230X device.
  ret, manufacturer, description, serial = ftdi.usb_get_strings(ftdic, devlist.dev)
  if ret < 0:
    raise ErrorMsg('ftdi.usb_get_strings error = %s' % ftdi.get_error_string(ftdic))
  print 'manufacturer="%s" description="%s" serial="%s"' % (manufacturer, description, serial)

  # Open the identified single FT230X device.
  ret = ftdi.usb_open_desc(ftdic, 0x0403, 0x6015, description, serial)
  if ret < 0:
    raise ErrorMsg('ftdi.usb_open_desc error = %s' % ftdi.get_error_string(ftdic))

  # Read the chip id.
  ret, chipid = ftdi.read_chipid(ftdic)
  if ret < 0:
    raise ErrorMsg('ftdi.read_chipid error = %s' % ftdi.get_error_string(ftdic))
  print 'chip id=0x%08X' % (chipid % 2**32)
Пример #7
0
    os._exit(1)

# try to list ftdi devices 0x6010 or 0x6001
ret, devlist = ftdi.usb_find_all(ftdic, 0x0403, 0x6010)
if ret <= 0:
    ret, devlist = ftdi.usb_find_all(ftdic, 0x0403, 0x6001)

if ret < 0:
    print('ftdi_usb_find_all failed: %d (%s)' %
          (ret, ftdi.get_error_string(ftdic)))
    os._exit(1)
print('devices: %d' % ret)
curnode = devlist
i = 0
while(curnode != None):
    ret, manufacturer, description, serial = ftdi.usb_get_strings(
        ftdic, curnode.dev)
    if ret < 0:
        print('ftdi_usb_get_strings failed: %d (%s)' %
              (ret, ftdi.get_error_string(ftdic)))
        os._exit(1)
    print('#%d: manufacturer="%s" description="%s" serial="%s"\n' %
          (i, manufacturer, description, serial))
    curnode = curnode.next
    i += 1

# open usb
ret = ftdi.usb_open(ftdic, 0x0403, 0x6001)
if ret < 0:
    print('unable to open ftdi device: %d (%s)' %
          (ret, ftdi.get_error_string(ftdic)))
    os._exit(1)
Пример #8
0
  # Allocate and inialize an ftdi context.
  ftdic = ftdi.new()
  if ftdic == 0:
    raise ErrorMsg('ftdi.new() failed')

  # List all the FT230X devices.
  nDevices, devlist = ftdi.usb_find_all(ftdic, 0x0403, 0x6015)
  if nDevices < 0:
    raise ErrorMsg('ftdi.usb_find_all error = %s' % ftdi.get_error_string(ftdic));
  elif nDevices == 0:
    raise ErrorMsg('No FT230X devices found');
  elif nDevices != 1:
    raise ErrorMsg('More than one FT230X device found');

  # Display the identified single FT230X device.
  ret, manufacturer, description, serial = ftdi.usb_get_strings(ftdic, devlist.dev)
  if ret < 0:
    raise ErrorMsg('ftdi.usb_get_strings error = %s' % ftdi.get_error_string(ftdic))
  print 'manufacturer="%s" description="%s" serial="%s"' % (manufacturer, description, serial)

  # Open the identified single FT230X device.
  ret = ftdi.usb_open_desc(ftdic, 0x0403, 0x6015, description, serial);
  if ret < 0:
    raise ErrorMsg('ftdi.usb_open_desc error = %s' % ftdi.get_error_string(ftdic))

  # Read the chip id.
  ret, chipid = ftdi.read_chipid(ftdic)
  if ret < 0:
    raise ErrorMsg('ftdi.read_chipid error = %s' % ftdi.get_error_string(ftdic))
  print 'chip id=0x%08X' % (chipid % 2**32)