Пример #1
0
    def definalize_batch(self, config, logger, batch, force):
        if batch.status != BatchStatusEnum.BS_FINALISED:
            return False

        result_fields = batch.result_fields or {}
        ifns_reg_status = result_fields.get('ifns_reg_info', {}).get('status', '')
        if ifns_reg_status == 'registered':
            raise errors.DocumentBatchDefinalizationError()

        for doc in BatchDocumentDbObject.query.filter_by(batch=batch):
            if doc.file:
                file_obj = doc.file
                doc.file = None
                FileStorage.remove_file(file_obj.id, config)

        batch.status = BatchStatusEnum.BS_EDITED
        batch.ifns_reg_info = None
        batch.last_change_dt = datetime.utcnow()
        sqldb.session.commit()

        from services.ifns import ifns_manager
        from services.notarius import notarius_manager
        from services.yurist import yurist_manager

        yurist_manager.cancel_check(batch, config, logger)
        notarius_manager.discard_booking(batch, config, logger)
        ifns_manager.discard_booking(batch, logger)

        return True
Пример #2
0
    def definalize_batch(self, config, logger, batch, force):
        if batch.status != BatchStatusEnum.BS_FINALISED:
            return False

        for doc in BatchDocumentDbObject.query.filter_by(batch=batch):
            if doc.file:
                file_obj = doc.file
                doc.file = None
                FileStorage.remove_file(file_obj.id, config)

        batch.status = BatchStatusEnum.BS_EDITED
        batch.ifns_reg_info = None,
        batch.last_change_dt = datetime.utcnow()
        sqldb.session.commit()
        return True
Пример #3
0
    def definalize_batch(self, config, logger, batch, force):
        if batch.status != BatchStatusEnum.BS_FINALISED:
            return False

        for doc in BatchDocumentDbObject.query.filter_by(batch=batch):
            if doc.file:
                file_obj = doc.file
                doc.file = None
                FileStorage.remove_file(file_obj.id, config)

        batch.status = BatchStatusEnum.BS_EDITED
        batch.ifns_reg_info = None,
        batch.last_change_dt = datetime.utcnow()
        sqldb.session.commit()
        return True
Пример #4
0
def yurist_check(config, batch_db, file_obj_list, logger):
    # get batch id and check if it is still in active state
    batch_check = YuristBatchCheckObject.query.filter(
        YuristBatchCheckObject.batch_id == batch_db.id,
        YuristBatchCheckObject.status.notin_(YuristBatchCheckStatus.FINAL_STATUSES)
    ).order_by(YuristBatchCheckObject.create_date.desc()).first()
    # this check should be performed later
    if not batch_check:
        return False
    user = batch_db._owner
    if not user:
        raise Exception("Failed to find batch owner")

    from fw.documents.batch_manager import BatchManager
    attaches = BatchManager.get_shared_links_to_rendered_docs(batch_db, config, logger)

    schema = config['WEB_SCHEMA']
    domain = config['DOMAIN']
    for file_obj in file_obj_list:
        path = FileStorage.get_path(file_obj, config)
        if os.path.exists(path):
            if file_obj._owner:
                url = u"%s://%s%s" % (schema, domain, FileStorage.get_shared_link(file_obj.id, config))
            else:
                url = u"%s://%s%s" % (schema, domain, FileStorage.get_url(file_obj, config))

            attaches.append({
                'url': url,
                'title': file_obj.file_name or url
            })

    rec_list = config['YURIST_EMAIL_LIST']
    from services.yurist.async_tasks import yurist_check_send
    batch_check_id = batch_check.id if batch_check else "not-found"
    # countdown 2 hours before execution
    yurist_check_send.check_and_send.apply_async(
        args=[],
        kwargs=dict(
            email=user.email,
            batch_check_id=batch_check_id,
            server_url_schema=config['WEB_SCHEMA'],
            api_url=config['api_url'],
            attaches=attaches,
            mail_type='yurist_batch_check',
            rec_list=rec_list
        ),
        countdown=config['SEND_DOCS_TO_YURIST_DELAY_SECONDS']
    )
Пример #5
0
def get_document_preview_status(batch_id=None, document_id=None):
    batch = DocumentBatchDbObject.query.filter_by(id=batch_id,
                                                  _owner=current_user,
                                                  deleted=False).first()
    if not batch:
        raise errors.BatchNotFound()

    doc = BatchDocumentDbObject.query.filter_by(batch=batch,
                                                id=document_id).first()
    if not doc:
        raise errors.DocumentNotFound()

    links = {
        'pdf': FileStorage.get_url(doc.file, current_app.config),
        'jpeg': []
    } if doc.file else {
        'pdf': None,
        'jpeg': []
    }

    return {
        'result': {
            'state': doc.status,
            'links': links,
            'document_id': unicode(document_id)
        }
    }
Пример #6
0
def make_all_user_fin_batch_paid_and_replace_watermarked_docs_with_normal(*args, **kwargs):
    db = celery.conf.get('db')
    config = celery.conf.get('config')

    user_id = kwargs['user_id']

    with celery.conf['flask_app']().app_context():
        logger = current_app.logger
        batches = DocumentBatchDbObject.query.filter_by(_owner_id=user_id, paid=False, status=BatchStatusEnum.BS_FINALISED)

        for batch in batches:
            batch.paid = True
            for doc in batch._documents:
                if doc.status == UserDocumentStatus.DS_RENDERED and doc.file:
                    try:
                        batch_id = batch.id
                        file_obj = doc.file
                        if not file_obj:
                            logger.error(u"Can't replace watermarked file: "
                                         u"Failed to find file of batch %s" % unicode(batch_id))
                            continue
                        file_path = FileStorage.get_path(file_obj, current_app.config)
                        if not file_path or not os.path.exists(file_path) or not os.path.exists(file_path + '.src'):
                            logger.error(u"Can't replace watermarked file: "
                                         u"Failed to find original or source file %s of batch %s" % (
                                             unicode(file_path + '.src'), unicode(batch_id)))
                            continue
                        os.rename(file_path + '.src', file_path)
                    except Exception:
                        logger.exception(u"Can't replace watermarked file")
        sqldb.session.commit()
        return True
def forward(config, logger):
    logger.debug(u"Migrate yurist models")

    yurist_col = db['yurist_batch_check']
    YuristCheckFilesObject.query.delete()
    YuristBatchCheckObject.query.delete()
    sqldb.session.commit()
    for old_yc in yurist_col.find():
        batch_id = str(old_yc['batch_id'])
        batch = DocumentBatchDbObject.query.filter_by(id=batch_id).first()
        if not batch:
            continue

        new_yc = YuristBatchCheckObject(
            id=str(old_yc['_id']),
            batch_id=batch_id,
            status=old_yc['status'],
            create_date=old_yc.get('create_date', datetime.utcnow()),
            typos_correction=old_yc.get('typos_correction', False))
        sqldb.session.add(new_yc)
        for file_descr in (old_yc.get('attached_files') or []):
            file_obj = FileStorage.get_file(str(file_descr['id']))
            if file_obj:
                attach = YuristCheckFilesObject()
                attach.files_id = file_obj.id
                new_yc.attached_files.append(attach)
    sqldb.session.commit()
Пример #8
0
def yurist_check(config, batch_db, file_obj_list, logger):
    # get batch id and check if it is still in active state
    batch_check = YuristBatchCheckObject.query.filter(
        YuristBatchCheckObject.batch_id == batch_db.id,
        YuristBatchCheckObject.status.notin_(
            YuristBatchCheckStatus.FINAL_STATUSES)).order_by(
                YuristBatchCheckObject.create_date.desc()).first()
    # this check should be performed later
    if not batch_check:
        return False
    user = batch_db._owner
    if not user:
        raise Exception("Failed to find batch owner")

    from fw.documents.batch_manager import BatchManager
    attaches = BatchManager.get_shared_links_to_rendered_docs(
        batch_db, config, logger)

    schema = config['WEB_SCHEMA']
    domain = config['DOMAIN']
    for file_obj in file_obj_list:
        path = FileStorage.get_path(file_obj, config)
        if os.path.exists(path):
            if file_obj._owner:
                url = u"%s://%s%s" % (schema, domain,
                                      FileStorage.get_shared_link(
                                          file_obj.id, config))
            else:
                url = u"%s://%s%s" % (schema, domain,
                                      FileStorage.get_url(file_obj, config))

            attaches.append({'url': url, 'title': file_obj.file_name or url})

    rec_list = config['YURIST_EMAIL_LIST']
    from services.yurist.async_tasks import yurist_check_send
    batch_check_id = batch_check.id if batch_check else "not-found"
    # countdown 2 hours before execution
    yurist_check_send.check_and_send.apply_async(
        args=[],
        kwargs=dict(email=user.email,
                    batch_check_id=batch_check_id,
                    server_url_schema=config['WEB_SCHEMA'],
                    api_url=config['api_url'],
                    attaches=attaches,
                    mail_type='yurist_batch_check',
                    rec_list=rec_list),
        countdown=config['SEND_DOCS_TO_YURIST_DELAY_SECONDS'])
Пример #9
0
def get_render_batch_documents_state(batch_id=None, document_types=None):
    batch = DocumentBatchDbObject.query.filter_by(id=batch_id,
                                                  _owner=current_user,
                                                  deleted=False).first()
    if not batch:
        raise errors.BatchNotFound()

    batch_manager = BatchManager.init(batch)
    try:
        document_types = json.loads(document_types)
        if not isinstance(document_types, list) and not isinstance(
                document_types, tuple):
            raise Exception()
    except Exception:
        raise errors.InvalidParameterValue('document_type')

    doc_type_set = set()
    for doc_type in document_types:
        if not batch_manager.check_doc_type_support(batch.batch_type,
                                                    doc_type):
            raise errors.InvalidParameterValue('document_type')
        doc_type_set.add(doc_type)

    result = []

    for doc_type in doc_type_set:
        doc_obj = BatchDocumentDbObject.query.filter_by(
            batch_id=batch_id, document_type=doc_type).first()
        if not doc_obj:
            result.append({
                'state': UserDocumentStatus.DS_NEW,
                'document_type': doc_type
            })
            continue

        doc_info = {'state': doc_obj.status, 'document_type': doc_type}

        if doc_obj.status == UserDocumentStatus.DS_RENDERED:
            if doc_obj.file:
                doc_info['links'] = {
                    'pdf': FileStorage.get_url(doc_obj.file,
                                               current_app.config),
                    'jpeg': []
                }
                result.append(doc_info)
            else:
                current_app.logger.debug(
                    u"Not found rendered documents for rendered document %s. "
                    u"Returning as rendering_failed" % doc_type)
                result.append({
                    'state': UserDocumentStatus.DS_RENDERING_FAILED,
                    'document_type': doc_type
                })
        else:
            result.append(doc_info)

    return result
Пример #10
0
def get_render_batch_documents_state(batch_id=None, document_types=None):
    batch = DocumentBatchDbObject.query.filter_by(id=batch_id, _owner=current_user, deleted=False).first()
    if not batch:
        raise errors.BatchNotFound()

    batch_manager = BatchManager.init(batch)
    try:
        document_types = json.loads(document_types)
        if not isinstance(document_types, list) and not isinstance(document_types, tuple):
            raise Exception()
    except Exception:
        raise errors.InvalidParameterValue('document_type')

    doc_type_set = set()
    for doc_type in document_types:
        if not batch_manager.check_doc_type_support(batch.batch_type, doc_type):
            raise errors.InvalidParameterValue('document_type')
        doc_type_set.add(doc_type)

    result = []

    for doc_type in doc_type_set:
        doc_obj = BatchDocumentDbObject.query.filter_by(batch_id=batch_id, document_type=doc_type).first()
        if not doc_obj:
            result.append({
                'state': UserDocumentStatus.DS_NEW,
                'document_type': doc_type
            })
            continue

        doc_info = {
            'state': doc_obj.status,
            'document_type': doc_type
        }

        if doc_obj.status == UserDocumentStatus.DS_RENDERED:
            if doc_obj.file:
                doc_info['links'] = {
                    'pdf': FileStorage.get_url(doc_obj.file, current_app.config),
                    'jpeg': []
                }
                result.append(doc_info)
            else:
                current_app.logger.debug(u"Not found rendered documents for rendered document %s. "
                                         u"Returning as rendering_failed" % doc_type)
                result.append({
                    'state': UserDocumentStatus.DS_RENDERING_FAILED,
                    'document_type': doc_type
                })
        else:
            result.append(doc_info)

    return result
Пример #11
0
def upload_file():
    file_obj = request.files['file']
    if file_obj and file_obj.filename and len(os.path.splitext(file_obj.filename)) > 1:
        t_file_out = tempfile.NamedTemporaryFile(mode="w+", delete=True, suffix=os.path.splitext(file_obj.filename)[-1])
        full_name = t_file_out.name
        t_file_out.close()
        file_obj.save(full_name)
        file_obj = FileStorage.add_file_from_disk(full_name, current_app.config, current_user.id, file_name=file_obj.filename)

        result = {
            "id": unicode(file_obj.id),
            "size": os.path.getsize(full_name),
            "file_name": file_obj.file_name,
            "url": FileStorage.get_url(file_obj, current_app.config)
        }
        os.unlink(full_name)
        resp = Response(json.dumps({"result": result}), content_type="application/json")
        resp.headers.add('Access-Control-Allow-Credentials', "true")
        resp.headers.add('Access-Control-Allow-Origin', "http://%s" % current_app.config['site_domain'])
        return resp

    abort(400)
Пример #12
0
def get_batch_doc(batch_id=None, document_id=None):
    config = current_app.config
    if not config['STAGING'] and not config['DEBUG']:
        abort(404)
    batch = DocumentBatchDbObject.query.filter_by(id=batch_id).first()
    if not batch:
        raise errors.BatchNotFound()

    doc = BatchDocumentDbObject.query.filter_by(id=document_id).first()

    file_obj = doc.file
    if file_obj:
        file_path = FileStorage.get_path(file_obj, current_app.config)
        if os.path.exists(file_path) and file_path.endswith('.pdf'):
            file_path = file_path[:-4] + '.text-src'
            if os.path.exists(file_path):
                with codecs.open(file_path, 'r', 'utf-8') as ff:
                    content = ff.read()
                    return {'result': content}
    raise errors.BatchNotFound()
Пример #13
0
def get_batch_reg_fee_invoice_data(batch_id=None):
    batch = DocumentBatchDbObject.query.filter_by(id=batch_id, _owner=current_user, deleted=False).scalar()
    if not batch:
        raise errors.BatchNotFound()

    if batch.status != BatchStatusEnum.BS_FINALISED:
        return {"result": None, "message": "document batch is not finalized"}

    for doc in batch._documents:
        if doc.document_type in (DocumentTypeEnum.DT_REGISTRATION_FEE_INVOICE,
                                 DocumentTypeEnum.DT_IP_STATE_DUTY) and doc.status==UserDocumentStatus.DS_RENDERED:
            file_obj = doc.file
            if not file_obj:
                return {"result": None, "message": "failed to find file object for document with id %s" % doc.id}
            path = FileStorage.get_path(file_obj, current_app.config)
            if not path or not os.path.exists(path):
                return {"result": None, "message": "file %s not found" % path}
            res = get_reg_fee_data(path)
            if not res:
                return {"result": None, "message": "Failed to get reg fee data"}
            return {"result": res}

    return {"result": None, "message": "rendered document not found"}
Пример #14
0
def get_batch_reg_fee_invoice_data(batch_id=None):
    batch = DocumentBatchDbObject.query.filter_by(id=batch_id,
                                                  _owner=current_user,
                                                  deleted=False).scalar()
    if not batch:
        raise errors.BatchNotFound()

    if batch.status != BatchStatusEnum.BS_FINALISED:
        return {"result": None, "message": "document batch is not finalized"}

    for doc in batch._documents:
        if doc.document_type in (
                DocumentTypeEnum.DT_REGISTRATION_FEE_INVOICE,
                DocumentTypeEnum.DT_IP_STATE_DUTY
        ) and doc.status == UserDocumentStatus.DS_RENDERED:
            file_obj = doc.file
            if not file_obj:
                return {
                    "result":
                    None,
                    "message":
                    "failed to find file object for document with id %s" %
                    doc.id
                }
            path = FileStorage.get_path(file_obj, current_app.config)
            if not path or not os.path.exists(path):
                return {"result": None, "message": "file %s not found" % path}
            res = get_reg_fee_data(path)
            if not res:
                return {
                    "result": None,
                    "message": "Failed to get reg fee data"
                }
            return {"result": res}

    return {"result": None, "message": "rendered document not found"}
Пример #15
0
def get_document_preview_status(batch_id=None, document_id=None):
    batch = DocumentBatchDbObject.query.filter_by(id=batch_id, _owner=current_user, deleted=False).first()
    if not batch:
        raise errors.BatchNotFound()

    doc = BatchDocumentDbObject.query.filter_by(batch=batch, id=document_id).first()
    if not doc:
        raise errors.DocumentNotFound()

    links = {
        'pdf': FileStorage.get_url(doc.file, current_app.config),
        'jpeg': []
    } if doc.file else {
        'pdf': None,
        'jpeg': []
    }

    return {
        'result': {
            'state': doc.status,
            'links': links,
            'document_id': unicode(document_id)
        }
    }
Пример #16
0
                owner_id,
                add_watermark=None
            )  # TODO: watermark logic for not-paid batches, preview documents
            if result:
                logger.info(u" - BB - ")
                first_file_id = result[0]
                assert first_file_id
                file_obj = FileObject.query.filter_by(id=first_file_id).first()
                if file_obj:
                    logger.info(u" - BB file_obj = %s - " % first_file_id)
                    BatchDocumentDbObject.query.filter_by(
                        id=doc_id, _celery_task_id=request_id).update({
                            'status':
                            UserDocumentStatus.DS_RENDERED,
                            'pages_count':
                            FileStorage.get_pdf_file_page_count(
                                first_file_id, config)
                        })
                    DocumentFilesObject.query.filter_by(doc_id=doc_id).delete()

                    for file_id in result:
                        new_doc_file = DocumentFilesObject(doc_id=doc_id,
                                                           files_id=file_id)
                        sqldb.session.add(new_doc_file)
            else:
                logger.info(u" - CC - ")
                raise Exception("Failed to generate document %s" % doc_id)
        except Exception, ex:
            logger.info(u" - DD - ")
            logger.exception(u"Failed to render document %s" % doc_id)

            result = BatchDocumentDbObject.query.filter_by(
Пример #17
0
def get_private_file(file_path):
    if not current_user.is_authenticated:
        return not_authorized(current_app.config['site_domain'])

    current_app.logger.info(u'file: %s' % file_path)
    content_type = 'application/octet-stream' if ('download/' in file_path) else ''
    file_id = None
    try:
        for part in file_path.split('/'):
            try:
                ObjectId(part)
                file_id = part
                break
            except InvalidId:
                pass
        if not file_id:
            raise ValueError()
    except ValueError:
        current_app.logger.exception(u"Invalid file id")
        abort(400)
        return

    file_obj = FileObject.query.filter_by(id=file_id).first()
    if not file_obj:
        current_app.logger.exception(u"No such file in db with id %s" % unicode(file_id))
        abort(404)
        return

    if file_obj._owner and current_user != file_obj._owner:
        current_app.logger.exception(u"File is not yours with id %s" % unicode(file_id))
        abort(403)
        return

    if file_obj._original_file:
        file_id = file_obj._original_file
        file_obj = FileObject.query.filter_by(id=file_obj._original_file).first()
        if not file_obj:
            current_app.logger.exception(u"No such file in db with id %s" % file_id)
            abort(404)
            return

#    current_app.logger.info(u" file 4")
    file_full_path = FileStorage.get_path(file_obj, current_app.config)
    if not os.path.exists(file_full_path):
        current_app.logger.exception(u"File with id %s not found at %s" % (unicode(file_id), file_full_path))
        abort(404)
        return
#    current_app.logger.info(u" file 5")
    resp = Response(u"", headers={'X-Accel-Redirect': file_full_path}, content_type=content_type)
    if 'download/' in file_path:
        try:
            from email.header import decode_header, Header
            parts = file_path.split('/')
            fname = u""
            if len(parts) > 1:
                fname = parts[-1]
            if not fname and len(parts) > 2:
                fname = parts[-2]
            fname = filter(lambda x: x in u"abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVQXYZ0123456789-=`!@#$%^&*()_+\\|[]{}абвгдеёжзийклмнопрстуфхцчшщьыъэюяАБВГДЕЁЖЗИЙКЛМНОПРСТУФХЦЧШЩЬЫЪЭЮЯ.,;':\"/? ", fname)
            current_app.logger.info(u"  fname:%s" % fname)
            if fname:
                header_val = str(Header(fname, 'utf-8', maxlinelen=10000)).replace('?=\n =?utf-8?b?', '')
                current_app.logger.info(u"  header_val:%s" % header_val)
                resp.headers.add("Content-Disposition", u"attachment; filename=%s" % header_val)
        except Exception, ex:
            current_app.logger.exception(u"Failed to add header")
Пример #18
0
def yad_payment_aviso():
    dt_str = datetime.utcnow().strftime("%Y-%m-%dT%H:%M:%SZ")  # u"2011-05-04T20:38:01.000+04:00"

    logger = current_app.logger

    request_datetime = request.form.get('requestDatetime', "")
    md5 = request.form.get('md5', "")
    shop_id = request.form.get('shopId', "")
    shop_article_id = request.form.get('shopArticleId', "")
    invoice_id = request.form.get('invoiceId', "")
    orderId = request.form.get('orderId', "")
    customer_number = request.form.get('customerNumber', "")
    order_created_datetime = request.form.get('orderCreatedDatetime', "")
    order_sum_amount = request.form.get('orderSumAmount', "")
    order_sum_currency_paycash = request.form.get('orderSumCurrencyPaycash', "")
    order_sum_bank_paycash = request.form.get('orderSumBankPaycash', "")
    shop_sum_amount = request.form.get('shopSumAmount', "")
    shop_sum_currency_paycash = request.form.get('shopSumCurrencyPaycash', "")
    shop_sum_bank_paycash = request.form.get('shopSumBankPaycash', "")
    payment_payer_code = request.form.get('paymentPayerCode', "")
    payment_type = request.form.get('paymentType', "")
    action = request.form.get('action', "")
    payment_datetime = request.form.get('paymentDatetime', "")
    cps_user_country_code = request.form.get('cps_user_country_code', "")

    invalid_request_error = u"""<?xml version="1.0" encoding="UTF-8"?>
<paymentAvisoResponse  performedDatetime="%s" code="200" invoiceId="%s" shopId="%s" message="msg"/>""" % (
        dt_str, invoice_id, shop_id)

    authorization_error = u"""<?xml version="1.0" encoding="UTF-8"?>
<paymentAvisoResponse  performedDatetime="%s" code="1" invoiceId="%s" shopId="%s" message="Invalid request: md5 sum does not match provided value"/>""" % (
        dt_str, invoice_id, shop_id)

    admins_emails = current_app.config['ADMIN_EMAIL_LIST']
    if not md5 or not shop_id or not action or not order_sum_amount or not order_sum_currency_paycash \
            or not order_sum_bank_paycash or not invoice_id or not customer_number or not orderId:
        current_app.logger.warn(u"Invalid request from yad: %s" % unicode(request.form))
        _notify_admin(action, u"missing one of required arguments", admins_emails)
        return _xml_resp(invalid_request_error.replace(u'msg', u"missing one of required arguments"))

    shop_password = current_app.config['YAD_ESHOP_PASSWORD']
    yad_ip_list = current_app.config['YAD_IP_LIST']

    # MD5 calc
    # action;orderSumAmount;orderSumCurrencyPaycash;orderSumBankPaycash;shopId;invoiceId;customerNumber;shopPassword
    our_md5_string = "%s;%s;%s;%s;%s;%s;%s;%s" % (action, order_sum_amount, order_sum_currency_paycash,
                                                  order_sum_bank_paycash, shop_id, invoice_id, customer_number,
                                                  shop_password)

    m = hashlib.md5()
    m.update(our_md5_string)

    ip = None
    if 'X-Forwarded-For' in request.headers:
        ip = request.headers['X-Forwarded-For']
    if not ip and 'X-Real-Ip' in request.headers:
        ip = request.headers['X-Real-Ip']
    if not ip:
        ip = request.remote_addr

    new_item = YadRequestsObject(
        ip=ip,
        created=datetime.utcnow(),
        request_datetime=parse_iso_dt(request_datetime),
        md5=md5,
        shop_id=int(shop_id),
        shop_article_id=int(shop_article_id) if shop_article_id else 0,
        invoice_id=int(invoice_id),
        order_number=orderId,
        customer_number=customer_number,
        order_created_datetime=parse_iso_dt(order_created_datetime),
        order_sum_amount=Decimal(order_sum_amount),
        order_sum_currency_paycash=order_sum_currency_paycash,
        order_sum_bank_paycash=order_sum_bank_paycash,
        shop_sum_amount=Decimal(shop_sum_amount),
        shop_sum_currency_paycash=shop_sum_currency_paycash,
        shop_sum_bank_paycash=shop_sum_bank_paycash,
        payment_payer_code=payment_payer_code,
        payment_type=payment_type,
        action=action,
        payment_datetime=parse_iso_dt(payment_datetime),
        cps_user_country_code=cps_user_country_code
    )
    sqldb.session.add(new_item)
    sqldb.session.commit()

    if action != u'paymentAviso':
        current_app.logger.warn(u"Invalid request from yad: %s" % unicode(request.form))
        _notify_admin(action, u"invalid action id: %s" % unicode(action), admins_emails)
        return _xml_resp(invalid_request_error.replace(u'msg', u"invalid action id: %s" % unicode(action)))

    if yad_ip_list:
        if ip not in yad_ip_list:
            current_app.logger.warn(u"Invalid request from yad: %s" % unicode(request.form))
            _notify_admin(action, u"sender ip (%s) not in whitelist" % ip, admins_emails)
            return _xml_resp(invalid_request_error.replace(u'msg', u"sender ip not in whitelist"))
    else:
        current_app.logger.warn(u"Can't check IP address: YAD_IP_LIST config option is empty")

    if m.hexdigest().upper() != md5:
        current_app.logger.warn(u"Invalid request from yad: %s" % unicode(request.form))
        _notify_admin(action, u"arguments md5 digests do not match", admins_emails)
        return _xml_resp(authorization_error)

    try:
        auth_user_id = customer_number
        batch_id = orderId if orderId not in ('subscription_3', 'subscription_1') else None
        subs_type = orderId if orderId in ('subscription_3', 'subscription_1') else None
        if not batch_id and not subs_type:
            raise Exception("Invalid order number:%s" % orderId)
    except Exception:
        current_app.logger.warn(u"Invalid request from yad: %s" % unicode(request.form))
        _notify_admin(action, u"Invalid user id or batch id", admins_emails)
        return _xml_resp(invalid_request_error.replace(u'msg', u"Invalid user id or batch id"))

    user = AuthUser.query.filter_by(uuid=auth_user_id).scalar()
    if not user:
        current_app.logger.warn(u"Invalid request from yad: %s" % unicode(request.form))
        _notify_admin(action, u"User with id %s not found" % unicode(auth_user_id), admins_emails)
        return _xml_resp(invalid_request_error.replace(u'msg', u"User not found"))

    success_result = u"""<?xml version="1.0" encoding="UTF-8"?>
    <paymentAvisoResponse performedDatetime ="%s" code="0" invoiceId="%s" shopId="%s"/>""" % (
        dt_str, invoice_id, shop_id)

    pay_info = {
        'dt': datetime.now(),
        'shop_id': shop_id,
        'invoice_id': invoice_id,
        'order_sum_amount': order_sum_amount,
        'order_sum_currency_paycash': order_sum_currency_paycash,
        'order_sum_bank_paycash': order_sum_bank_paycash
    }

    if shop_article_id is not None:
        pay_info['shop_article_id'] = shop_article_id
    if order_created_datetime:
        pay_info['order_created_datetime'] = order_created_datetime
    if shop_sum_amount:
        pay_info['shop_sum_amount'] = shop_sum_amount
    if shop_sum_currency_paycash:
        pay_info['shop_sum_currency_paycash'] = shop_sum_currency_paycash
    if shop_sum_bank_paycash:
        pay_info['shop_sum_bank_paycash'] = shop_sum_bank_paycash
    if payment_payer_code:
        pay_info['payment_payer_code'] = payment_payer_code
    if payment_type:
        pay_info['payment_type'] = payment_type
    if payment_datetime:
        pay_info['payment_datetime'] = payment_datetime
    if cps_user_country_code:
        pay_info['cps_user_country_code'] = cps_user_country_code
    if request_datetime:
        pay_info['request_datetime'] = request_datetime

    if batch_id:
        batch = DocumentBatchDbObject.query.filter_by(id=batch_id).scalar()

        if not batch:
            current_app.logger.warn(u"Invalid request from yad: %s" % unicode(request.form))
            _notify_admin(action, u"Batch with id %s not found" % batch_id, admins_emails)
            return _xml_resp(invalid_request_error.replace(u'msg', u"Batch not found"))

        modify_result = DocumentBatchDbObject.query.filter_by(id=batch_id).update({
            "pay_info": pay_info,
            "paid": True
        })
        if batch.batch_type == DocumentBatchTypeEnum.DBT_NEW_LLC:
            pay_info = PayInfoObject(
                user=batch._owner,
                batch=batch,
                pay_record_id=new_item.id,
                payment_provider=PaymentProvider.YAD,
                service_type=PurchaseServiceType.LLC_PURCHASE
            )
            sqldb.session.add(pay_info)
            sqldb.session.commit()
        elif batch.batch_type == DocumentBatchTypeEnum.DBT_OSAGO:
            count = PayInfoObject.query.filter_by(batch=batch).count()
            osago_service_code = PurchaseServiceType.OSAGO_PART1 if count < 1 else PurchaseServiceType.OSAGO_PART2
            pay_info = PayInfoObject(
                user=batch._owner,
                batch=batch,
                pay_record_id=new_item.id,
                payment_provider=PaymentProvider.YAD,
                service_type=osago_service_code
            )
            sqldb.session.add(pay_info)
            batch.paid = True
            sqldb.session.commit()
            event = {
                PurchaseServiceType.OSAGO_PART1: 'rerender_pretension',
                PurchaseServiceType.OSAGO_PART2: 'rerender_claim'
            }.get(osago_service_code, None)
            if event:
                BatchManager.handle_event(batch_id, event, {'batch_id': batch_id}, current_app.logger, current_app.config)

        if modify_result is None:
            logger.error(u"Failed to set payment info to batch")
            _notify_admin(action, u"Failed to set payment info to batch", admins_emails)
            return _xml_resp(invalid_request_error.replace(u'msg', u"Failed to process"))

        try:
            for doc in BatchDocumentDbObject.query.filter_by(batch=batch, status=UserDocumentStatus.DS_RENDERED):
                if not doc.file:
                    continue

                file_obj = doc.file
                if not file_obj:
                    logger.error(u"Can't replace watermarked file: Failed to find file of batch %s" % batch_id)
                    continue

                file_path = FileStorage.get_path(file_obj, current_app.config)
                if not file_path or not os.path.exists(file_path) or not os.path.exists(file_path + '.src'):
                    logger.error(
                        u"Can't replace watermarked file: Failed to find original or source file %s of batch %s" % (
                            unicode(file_path + '.src'), batch_id))
                    continue
                os.rename(file_path + '.src', file_path)
        except Exception:
            current_app.logger.exception(u"FAILED TO REPLACE WATERMARKED DOCS")

        if current_app.config.get('PROD', False):
            appcraft.send_stat(batch.batch_type + '_payment_received', batch._owner, batch.id, batch.batch_type, int(invoice_id))
            mixpanel_metrics.send_stat(batch.batch_type + '_payment_received', batch._owner, batch.id, batch.batch_type)

        try:
            if batch.batch_type == DocumentBatchTypeEnum.DBT_NEW_LLC:
                BatchManager.send_batch_docs_to_user(batch_id, current_app.config)
        except Exception:
            logger.exception(u"Failed to send documents to user.")
    elif subs_type:
        user_subs = PaymentSubscriptionObject.query.filter(
            PaymentSubscriptionObject.user == user,
            PaymentSubscriptionObject.end_dt.__ge__(datetime.utcnow())
        )

        if not user_subs.count():
            end_date = datetime.utcnow()
            if subs_type == 'subscription_3':
                end_date += relativedelta(months=3)
            elif subs_type == 'subscription_1':
                end_date += relativedelta(months=1)

            new_subs = PaymentSubscriptionObject(
                pay_info=pay_info,
                created=datetime.utcnow(),
                end_dt=end_date,
                user=user,
                type=subs_type
            )
            sqldb.session.add(new_subs)
            sqldb.session.commit()

            from fw.async_tasks import not_paid_check_send

            not_paid_check_send.make_all_user_fin_batch_paid_and_replace_watermarked_docs_with_normal.delay(
                user_id=user.id)

    current_app.logger.info(u"yad - success")
    return _xml_resp(success_result)
Пример #19
0
    try:

        try:
            from fw.documents.doc_builder import DocBuilder

            result = DocBuilder.process(doc_data, target_document.document_type.db_value(), config, owner_id, add_watermark=None) # TODO: watermark logic for not-paid batches, preview documents
            if result:
                logger.info(u" - BB - ")
                first_file_id = result[0]
                assert first_file_id
                file_obj = FileObject.query.filter_by(id=first_file_id).first()
                if file_obj:
                    logger.info(u" - BB file_obj = %s - " % first_file_id)
                    BatchDocumentDbObject.query.filter_by(id=doc_id, _celery_task_id=request_id).update({
                        'status': UserDocumentStatus.DS_RENDERED,
                        'pages_count': FileStorage.get_pdf_file_page_count(first_file_id, config)
                    })
                    DocumentFilesObject.query.filter_by(doc_id=doc_id).delete()

                    for file_id in result:
                        new_doc_file = DocumentFilesObject(
                            doc_id=doc_id,
                            files_id=file_id
                        )
                        sqldb.session.add(new_doc_file)
            else:
                logger.info(u" - CC - ")
                raise Exception("Failed to generate document %s" % doc_id)
        except Exception, ex:
            logger.info(u" - DD - ")
            logger.exception(u"Failed to render document %s" % doc_id)
Пример #20
0
def act(action, batch_db, event_data, plugin_config, logger, config):
    assert batch_db
    descriptors = filter(lambda x: x['name'] == action, get_actions())
    action_descriptor = descriptors[0] if descriptors else None
    if not action_descriptor:
        raise ValueError(u'Invalid action: %s for %s plugin' %
                         (action, PLUGIN_NAME))
    args = action_descriptor['args']
    source_data = copy(event_data)
    data = transform_with_schema(source_data, {"fields": args})

    batch_manager = BatchManager.init(batch_db)

    if action == 'render_group':
        doc_id_list = []
        batch_id = data['batch_id'].db_value()
        doc_types = event_data[
            'doc_types'] if 'doc_types' in event_data else plugin_config.get(
                'doc_types', [])
        assert doc_types

        try:
            all_ready = True
            for doc_type in doc_types:
                doc = BatchDocumentDbObject.query.filter_by(
                    document_type=doc_type, batch_id=batch_id).first()
                if doc:
                    doc.data = {}
                    doc.status = UserDocumentStatus.DS_RENDERING
                    doc.tried_to_render = True
                    if doc.file:
                        file_obj = doc.file
                        doc.file = None
                        FileStorage.remove_file(file_obj.id,
                                                current_app.config)
                    sqldb.session.commit()

                else:
                    if not batch_manager.is_document_required(
                            batch_db, doc_type):
                        logger.debug(
                            u"Document %s is not required by its condition. Skipping"
                            % doc_type)
                        continue

                    new_doc = BatchDocumentDbObject(
                        _owner=current_user,
                        document_type=doc_type,
                        batch_id=batch_id,
                        data={},
                        status=UserDocumentStatus.DS_RENDERING,
                        caption=batch_manager.get_title(doc_type),
                        tried_to_render=True)
                    sqldb.session.add(new_doc)
                    sqldb.session.commit()
                    doc = new_doc

                async_result = rendering.render_document_plugin.apply_async(
                    (batch_id, {
                        'doc_id': doc.id
                    }), countdown=2)
                if not async_result.ready():
                    all_ready = False
                    BatchDocumentDbObject.query.filter_by(id=doc.id).update({
                        '_celery_task_id':
                        str(async_result.id),
                        '_celery_task_started':
                        datetime.utcnow()
                    })
                    sqldb.session.commit()

                doc_id_list.append(doc.id)

            check_task_info = DocGroupRenderTaskCheck(batch_id=batch_id,
                                                      doc_id_list=doc_id_list,
                                                      event_data=event_data)
            sqldb.session.add(check_task_info)
            sqldb.session.commit()
            if all_ready:
                rendering.batch_group_gen_check_task.delay()
        except Exception:
            zabbix_sender.send("celery_failures", 1)
            logger.exception(u"Failed to start rendering document group")
            raise
    elif action == 'render_doc':
        pass
    elif action == 'render_doc_by_id':
        pass
    elif action == 'cancel_doc_render':
        pass
    elif action == 'cancel_doc_render_by_id':
        pass
    else:
        raise Exception(u"Invalid action %s for plugin %s" %
                        (action, PLUGIN_NAME))

    # mail_type = data['mail_type'].db_value()
    # target_type = data['target_type'].db_value()
    # target_emails = []
    # if target_type == MailTargetEnum.MTA_BATCH_OWNER:
    #     email = batch_db._owner.email
    #     if email:
    #         target_emails.append(email)
    # elif target_type == MailTargetEnum.MTA_SPECIFIED:
    #     target_emails = data.get('target_email_list', [])
    # else:   #MailTargetEnum.MTA_EVENT_DATA_FIELD
    #     data_field = data.get('event_data_field', None)
    #     if data_field:
    #         email = event_data.get(data_field, None)
    #         if email:
    #             target_emails.append(email)
    #
    # if not target_emails:
    #     core_tasks.send.delay(batch_db.id, '%s:send_fail' % PLUGIN_NAME, event_data)
    #     return False
    #
    # composer = create_composer(mail_type, logger)
    # retry_count = data.get('retry_count')
    # silent = data.get('silent', False)
    # from fw.documents.fields.simple_doc_fields import DocField
    # try:
    #     if isinstance(target_emails, DocField):
    #         target_emails = target_emails.db_value()
    #     if isinstance(retry_count, DocField):
    #         retry_count = retry_count.db_value()
    #     if isinstance(silent, DocField):
    #         silent = silent.db_value()
    #     composer.send_email(target_emails, batch_id, event_data, retry_count, silent=silent)
    # except Exception:
    #     logger.exception(u"Failed to send email")
    #     return False
    return True
Пример #21
0
def render_batch_document_raw(batch_db_object_id, doc_id, config):
    start_time = datetime.utcnow()
    request_id = current_task.request.id
    logger = celery.log.get_default_logger()
    logger.info(u"Starting rendering document %s of %s" % (doc_id, batch_db_object_id))
    target_document = BatchDocumentDbObject.query.filter_by(id=doc_id).scalar()
    if not target_document:
        logger.warn(u" - O_o - ")
        return False

    if celery.conf['CELERY_ALWAYS_EAGER']:
        request_id = "test"
        target_document._celery_task_id = request_id
        target_document._celery_task_started = start_time

    logger.info(u"doc type of %s is %s" % (doc_id, target_document.document_type))
    if target_document and target_document.status == UserDocumentStatus.DS_RENDERING:
        assert(target_document._celery_task_id)
        assert(target_document._celery_task_started)
        if target_document._celery_task_id != request_id:
            logger.info(u" - B - ")
            if abs((datetime.utcnow() - target_document._celery_task_started).total_seconds()) < 60:
                logger.info(u" - C - ")
                logger.info(
                    u"Task for rendering %s of %s is already being run. Exiting..." % (doc_id, batch_db_object_id))
                return True

        result = BatchDocumentDbObject.query.filter_by(id=doc_id, status=UserDocumentStatus.DS_RENDERING).update(
            {
                '_celery_task_id': request_id,
                '_celery_task_started': start_time
            }
        )
        sqldb.session.commit()

        if not result:
            logger.error(u"Failed to change status of document being rendered into RENDERING state. \n"
                         u"Probably document is being generated now already 1")
            return True

    logger.info(u" - F - ")
    batch_db_object = DocumentBatchDbObject.query.filter_by(id=batch_db_object_id).scalar()
    if not batch_db_object:
        logger.error(u"Failed to find batch with id %s" % batch_db_object_id)
        return True

    from fw.documents.batch_manager import BatchManager

    owner_id = batch_db_object._owner_id

    logger.info(u" - I - ")
    if target_document.file:
        file_obj = target_document.file
        target_document.file = None
        FileStorage.remove_file(file_obj.id, config)

    BatchDocumentDbObject.query.filter_by(id=target_document.id).update({
        'file_id': None,
        'status': UserDocumentStatus.DS_RENDERING,
        'data': {},
        '_celery_task_id': request_id,
        '_celery_task_started': start_time,
        'tried_to_render': True
    })
    sqldb.session.commit()
    target_document = BatchDocumentDbObject.query.filter_by(id=target_document.id).scalar()
    logger.info(u" - J updated %s - " % target_document.id)

    try:
        target_document = UserDocument.db_obj_to_field(target_document)
        _ = batch_db_object.data
        detached_batch = batch_db_object
        sqldb.session.expunge(detached_batch)
        make_transient(detached_batch)

        target_document_data = BatchManager.make_document(detached_batch, target_document.document_type.db_value())
        batch_db_object = DocumentBatchDbObject.query.filter_by(id=batch_db_object_id).scalar()

        logger.info(u" - T - ")
        if not target_document_data:
            logger.info(u" - U - ")
            BatchDocumentDbObject.query.filter_by(id=doc_id, _celery_task_id=request_id).update({
                'status': UserDocumentStatus.DS_RENDERING_FAILED,
                '_celery_task_id': None,
                '_celery_task_started': None
            })
            sqldb.session.commit()
            return True

        target_document.data.value = target_document_data
        target_document.data.initialized = True

        doc_data = target_document.get_db_object_data()["data"]
        result = BatchDocumentDbObject.query.filter_by(id=doc_id, _celery_task_id=request_id).update({'data': doc_data})
        sqldb.session.commit()

        # batch_descriptor = DocRequisitiesStorage.get_batch_descriptor(batch_db_object.batch_type)
        # validator_condition_schema = batch_descriptor.get('validation_condition', None)
        # from fw.documents.schema.var_construction import VarConstructorFactory
        # validator_condition = VarConstructorFactory.make_constructor(validator_condition_schema) if validator_condition_schema else None
        #
        # validation_type = ValidationTypeEnum.VT_STRICT
        #
        # if validator_condition:
        #     context = {
        #         '<document>': target_document,
        #         '<batch>': batch_db_object
        #     }
        #     validation_type = validator_condition.build(context)
        #
        # if validation_type != ValidationTypeEnum.VT_NO:
        #     target_document.validate(strict=(validation_type == ValidationTypeEnum.VT_STRICT))

        target_document.validate(strict=True)
        logger.info(u" - V - ")
    except Exception, ex:
        logger.info(u" - W - ")
        logger.exception(u"Failed to make document %s from batch %s" % (doc_id, batch_db_object_id))
        ext_data = []
        if getattr(ex, 'ext_data', None):
            ext_data.extend(ex.ext_data)
        if ext_data:
            error_info_ext = error_tree_to_list(ext_data)
            error_info_ext = [{
                'field': '.'.join(i['field'].split('.')[1:]) if '.' in i['field'] else i['field'],
                'error_code': i['error_code']
            } for i in error_info_ext]
            if not batch_db_object.error_info or 'error_ext' not in batch_db_object.error_info:
                batch_db_object.error_info = {
                    'error_ext': error_info_ext
                }
            else:
                error_info_fields_set = set([i['field'] for i in batch_db_object.error_info['error_ext']])
                merged_error_info = copy(batch_db_object.error_info)
                for i in error_info_ext:
                    if i['field'] not in error_info_fields_set:
                        merged_error_info['error_ext'].append({
                            'field': i['field'],
                            'error_code': i['error_code']
                        })
                sqldb.session.commit()
                batch_db_object.error_info = merged_error_info

        logger.info(u" - pre YY -> XX: %s - " % str(doc_id))

        result = BatchDocumentDbObject.query.filter_by(id=doc_id, _celery_task_id=request_id).update({
            'status': UserDocumentStatus.DS_RENDERING_FAILED,
            '_celery_task_id': None,
            '_celery_task_started': None
        })
        sqldb.session.commit()
        if not result:
            logger.warn(u"Failed to mark rendering document as failed")
            logger.info(u" - X - ")

        logger.info(u" - XX - ")
        return True
Пример #22
0
def act(action, batch_db, event_data, plugin_config, logger, config):
    assert batch_db
    descriptors = filter(lambda x: x['name'] == action, get_actions())
    action_descriptor = descriptors[0] if descriptors else None
    if not action_descriptor:
        raise ValueError(u'Invalid action: %s for %s plugin' % (action, PLUGIN_NAME))
    args = action_descriptor['args']
    source_data = copy(event_data)
    data = transform_with_schema(source_data, {"fields": args})

    batch_manager = BatchManager.init(batch_db)

    if action == 'render_group':
        doc_id_list = []
        batch_id = data['batch_id'].db_value()
        doc_types = event_data['doc_types'] if 'doc_types' in event_data else plugin_config.get('doc_types', [])
        assert doc_types

        try:
            all_ready = True
            for doc_type in doc_types:
                doc = BatchDocumentDbObject.query.filter_by(document_type=doc_type, batch_id=batch_id).first()
                if doc:
                    doc.data = {}
                    doc.status = UserDocumentStatus.DS_RENDERING
                    doc.tried_to_render = True
                    if doc.file:
                        file_obj = doc.file
                        doc.file = None
                        FileStorage.remove_file(file_obj.id, current_app.config)
                    sqldb.session.commit()

                else:
                    if not batch_manager.is_document_required(batch_db, doc_type):
                        logger.debug(u"Document %s is not required by its condition. Skipping" % doc_type)
                        continue

                    new_doc = BatchDocumentDbObject(
                        _owner=current_user,
                        document_type=doc_type,
                        batch_id=batch_id,
                        data={},
                        status=UserDocumentStatus.DS_RENDERING,
                        caption=batch_manager.get_title(doc_type),
                        tried_to_render=True
                    )
                    sqldb.session.add(new_doc)
                    sqldb.session.commit()
                    doc = new_doc

                async_result = rendering.render_document_plugin.apply_async((batch_id, {'doc_id': doc.id}), countdown=2)
                if not async_result.ready():
                    all_ready = False
                    BatchDocumentDbObject.query.filter_by(id=doc.id).update({
                        '_celery_task_id': str(async_result.id),
                        '_celery_task_started': datetime.utcnow()
                    })
                    sqldb.session.commit()

                doc_id_list.append(doc.id)

            check_task_info = DocGroupRenderTaskCheck(
                batch_id=batch_id,
                doc_id_list=doc_id_list,
                event_data=event_data
            )
            sqldb.session.add(check_task_info)
            sqldb.session.commit()
            if all_ready:
                rendering.batch_group_gen_check_task.delay()
        except Exception:
            zabbix_sender.send("celery_failures", 1)
            logger.exception(u"Failed to start rendering document group")
            raise
    elif action == 'render_doc':
        pass
    elif action == 'render_doc_by_id':
        pass
    elif action == 'cancel_doc_render':
        pass
    elif action == 'cancel_doc_render_by_id':
        pass
    else:
        raise Exception(u"Invalid action %s for plugin %s" % (action, PLUGIN_NAME))

    # mail_type = data['mail_type'].db_value()
    # target_type = data['target_type'].db_value()
    # target_emails = []
    # if target_type == MailTargetEnum.MTA_BATCH_OWNER:
    #     email = batch_db._owner.email
    #     if email:
    #         target_emails.append(email)
    # elif target_type == MailTargetEnum.MTA_SPECIFIED:
    #     target_emails = data.get('target_email_list', [])
    # else:   #MailTargetEnum.MTA_EVENT_DATA_FIELD
    #     data_field = data.get('event_data_field', None)
    #     if data_field:
    #         email = event_data.get(data_field, None)
    #         if email:
    #             target_emails.append(email)
    #
    # if not target_emails:
    #     core_tasks.send.delay(batch_db.id, '%s:send_fail' % PLUGIN_NAME, event_data)
    #     return False
    #
    # composer = create_composer(mail_type, logger)
    # retry_count = data.get('retry_count')
    # silent = data.get('silent', False)
    # from fw.documents.fields.simple_doc_fields import DocField
    # try:
    #     if isinstance(target_emails, DocField):
    #         target_emails = target_emails.db_value()
    #     if isinstance(retry_count, DocField):
    #         retry_count = retry_count.db_value()
    #     if isinstance(silent, DocField):
    #         silent = silent.db_value()
    #     composer.send_email(target_emails, batch_id, event_data, retry_count, silent=silent)
    # except Exception:
    #     logger.exception(u"Failed to send email")
    #     return False
    return True
Пример #23
0
def yad_payment_aviso():
    dt_str = datetime.utcnow().strftime(
        "%Y-%m-%dT%H:%M:%SZ")  # u"2011-05-04T20:38:01.000+04:00"

    logger = current_app.logger

    request_datetime = request.form.get('requestDatetime', "")
    md5 = request.form.get('md5', "")
    shop_id = request.form.get('shopId', "")
    shop_article_id = request.form.get('shopArticleId', "")
    invoice_id = request.form.get('invoiceId', "")
    orderId = request.form.get('orderId', "")
    customer_number = request.form.get('customerNumber', "")
    order_created_datetime = request.form.get('orderCreatedDatetime', "")
    order_sum_amount = request.form.get('orderSumAmount', "")
    order_sum_currency_paycash = request.form.get('orderSumCurrencyPaycash',
                                                  "")
    order_sum_bank_paycash = request.form.get('orderSumBankPaycash', "")
    shop_sum_amount = request.form.get('shopSumAmount', "")
    shop_sum_currency_paycash = request.form.get('shopSumCurrencyPaycash', "")
    shop_sum_bank_paycash = request.form.get('shopSumBankPaycash', "")
    payment_payer_code = request.form.get('paymentPayerCode', "")
    payment_type = request.form.get('paymentType', "")
    action = request.form.get('action', "")
    payment_datetime = request.form.get('paymentDatetime', "")
    cps_user_country_code = request.form.get('cps_user_country_code', "")

    invalid_request_error = u"""<?xml version="1.0" encoding="UTF-8"?>
<paymentAvisoResponse  performedDatetime="%s" code="200" invoiceId="%s" shopId="%s" message="msg"/>""" % (
        dt_str, invoice_id, shop_id)

    authorization_error = u"""<?xml version="1.0" encoding="UTF-8"?>
<paymentAvisoResponse  performedDatetime="%s" code="1" invoiceId="%s" shopId="%s" message="Invalid request: md5 sum does not match provided value"/>""" % (
        dt_str, invoice_id, shop_id)

    admins_emails = current_app.config['ADMIN_EMAIL_LIST']
    if not md5 or not shop_id or not action or not order_sum_amount or not order_sum_currency_paycash \
            or not order_sum_bank_paycash or not invoice_id or not customer_number or not orderId:
        current_app.logger.warn(u"Invalid request from yad: %s" %
                                unicode(request.form))
        _notify_admin(action, u"missing one of required arguments",
                      admins_emails)
        return _xml_resp(
            invalid_request_error.replace(
                u'msg', u"missing one of required arguments"))

    shop_password = current_app.config['YAD_ESHOP_PASSWORD']
    yad_ip_list = current_app.config['YAD_IP_LIST']

    # MD5 calc
    # action;orderSumAmount;orderSumCurrencyPaycash;orderSumBankPaycash;shopId;invoiceId;customerNumber;shopPassword
    our_md5_string = "%s;%s;%s;%s;%s;%s;%s;%s" % (
        action, order_sum_amount, order_sum_currency_paycash,
        order_sum_bank_paycash, shop_id, invoice_id, customer_number,
        shop_password)

    m = hashlib.md5()
    m.update(our_md5_string)

    ip = None
    if 'X-Forwarded-For' in request.headers:
        ip = request.headers['X-Forwarded-For']
    if not ip and 'X-Real-Ip' in request.headers:
        ip = request.headers['X-Real-Ip']
    if not ip:
        ip = request.remote_addr

    new_item = YadRequestsObject(
        ip=ip,
        created=datetime.utcnow(),
        request_datetime=parse_iso_dt(request_datetime),
        md5=md5,
        shop_id=int(shop_id),
        shop_article_id=int(shop_article_id) if shop_article_id else 0,
        invoice_id=int(invoice_id),
        order_number=orderId,
        customer_number=customer_number,
        order_created_datetime=parse_iso_dt(order_created_datetime),
        order_sum_amount=Decimal(order_sum_amount),
        order_sum_currency_paycash=order_sum_currency_paycash,
        order_sum_bank_paycash=order_sum_bank_paycash,
        shop_sum_amount=Decimal(shop_sum_amount),
        shop_sum_currency_paycash=shop_sum_currency_paycash,
        shop_sum_bank_paycash=shop_sum_bank_paycash,
        payment_payer_code=payment_payer_code,
        payment_type=payment_type,
        action=action,
        payment_datetime=parse_iso_dt(payment_datetime),
        cps_user_country_code=cps_user_country_code)
    sqldb.session.add(new_item)
    sqldb.session.commit()

    if action != u'paymentAviso':
        current_app.logger.warn(u"Invalid request from yad: %s" %
                                unicode(request.form))
        _notify_admin(action, u"invalid action id: %s" % unicode(action),
                      admins_emails)
        return _xml_resp(
            invalid_request_error.replace(
                u'msg', u"invalid action id: %s" % unicode(action)))

    if yad_ip_list:
        if ip not in yad_ip_list:
            current_app.logger.warn(u"Invalid request from yad: %s" %
                                    unicode(request.form))
            _notify_admin(action, u"sender ip (%s) not in whitelist" % ip,
                          admins_emails)
            return _xml_resp(
                invalid_request_error.replace(u'msg',
                                              u"sender ip not in whitelist"))
    else:
        current_app.logger.warn(
            u"Can't check IP address: YAD_IP_LIST config option is empty")

    if m.hexdigest().upper() != md5:
        current_app.logger.warn(u"Invalid request from yad: %s" %
                                unicode(request.form))
        _notify_admin(action, u"arguments md5 digests do not match",
                      admins_emails)
        return _xml_resp(authorization_error)

    try:
        auth_user_id = customer_number
        batch_id = orderId if orderId not in ('subscription_3',
                                              'subscription_1') else None
        subs_type = orderId if orderId in ('subscription_3',
                                           'subscription_1') else None
        if not batch_id and not subs_type:
            raise Exception("Invalid order number:%s" % orderId)
    except Exception:
        current_app.logger.warn(u"Invalid request from yad: %s" %
                                unicode(request.form))
        _notify_admin(action, u"Invalid user id or batch id", admins_emails)
        return _xml_resp(
            invalid_request_error.replace(u'msg',
                                          u"Invalid user id or batch id"))

    user = AuthUser.query.filter_by(uuid=auth_user_id).scalar()
    if not user:
        current_app.logger.warn(u"Invalid request from yad: %s" %
                                unicode(request.form))
        _notify_admin(action,
                      u"User with id %s not found" % unicode(auth_user_id),
                      admins_emails)
        return _xml_resp(
            invalid_request_error.replace(u'msg', u"User not found"))

    success_result = u"""<?xml version="1.0" encoding="UTF-8"?>
    <paymentAvisoResponse performedDatetime ="%s" code="0" invoiceId="%s" shopId="%s"/>""" % (
        dt_str, invoice_id, shop_id)

    pay_info = {
        'dt': datetime.now(),
        'shop_id': shop_id,
        'invoice_id': invoice_id,
        'order_sum_amount': order_sum_amount,
        'order_sum_currency_paycash': order_sum_currency_paycash,
        'order_sum_bank_paycash': order_sum_bank_paycash
    }

    if shop_article_id is not None:
        pay_info['shop_article_id'] = shop_article_id
    if order_created_datetime:
        pay_info['order_created_datetime'] = order_created_datetime
    if shop_sum_amount:
        pay_info['shop_sum_amount'] = shop_sum_amount
    if shop_sum_currency_paycash:
        pay_info['shop_sum_currency_paycash'] = shop_sum_currency_paycash
    if shop_sum_bank_paycash:
        pay_info['shop_sum_bank_paycash'] = shop_sum_bank_paycash
    if payment_payer_code:
        pay_info['payment_payer_code'] = payment_payer_code
    if payment_type:
        pay_info['payment_type'] = payment_type
    if payment_datetime:
        pay_info['payment_datetime'] = payment_datetime
    if cps_user_country_code:
        pay_info['cps_user_country_code'] = cps_user_country_code
    if request_datetime:
        pay_info['request_datetime'] = request_datetime

    if batch_id:
        batch = DocumentBatchDbObject.query.filter_by(id=batch_id).scalar()

        if not batch:
            current_app.logger.warn(u"Invalid request from yad: %s" %
                                    unicode(request.form))
            _notify_admin(action, u"Batch with id %s not found" % batch_id,
                          admins_emails)
            return _xml_resp(
                invalid_request_error.replace(u'msg', u"Batch not found"))

        modify_result = DocumentBatchDbObject.query.filter_by(
            id=batch_id).update({
                "pay_info": pay_info,
                "paid": True
            })
        if batch.batch_type == DocumentBatchTypeEnum.DBT_NEW_LLC:
            pay_info = PayInfoObject(
                user=batch._owner,
                batch=batch,
                pay_record_id=new_item.id,
                payment_provider=PaymentProvider.YAD,
                service_type=PurchaseServiceType.LLC_PURCHASE)
            sqldb.session.add(pay_info)
            sqldb.session.commit()
        elif batch.batch_type == DocumentBatchTypeEnum.DBT_OSAGO:
            count = PayInfoObject.query.filter_by(batch=batch).count()
            osago_service_code = PurchaseServiceType.OSAGO_PART1 if count < 1 else PurchaseServiceType.OSAGO_PART2
            pay_info = PayInfoObject(user=batch._owner,
                                     batch=batch,
                                     pay_record_id=new_item.id,
                                     payment_provider=PaymentProvider.YAD,
                                     service_type=osago_service_code)
            sqldb.session.add(pay_info)
            batch.paid = True
            sqldb.session.commit()
            event = {
                PurchaseServiceType.OSAGO_PART1: 'rerender_pretension',
                PurchaseServiceType.OSAGO_PART2: 'rerender_claim'
            }.get(osago_service_code, None)
            if event:
                BatchManager.handle_event(batch_id, event,
                                          {'batch_id': batch_id},
                                          current_app.logger,
                                          current_app.config)

        if modify_result is None:
            logger.error(u"Failed to set payment info to batch")
            _notify_admin(action, u"Failed to set payment info to batch",
                          admins_emails)
            return _xml_resp(
                invalid_request_error.replace(u'msg', u"Failed to process"))

        try:
            for doc in BatchDocumentDbObject.query.filter_by(
                    batch=batch, status=UserDocumentStatus.DS_RENDERED):
                if not doc.file:
                    continue

                file_obj = doc.file
                if not file_obj:
                    logger.error(
                        u"Can't replace watermarked file: Failed to find file of batch %s"
                        % batch_id)
                    continue

                file_path = FileStorage.get_path(file_obj, current_app.config)
                if not file_path or not os.path.exists(
                        file_path) or not os.path.exists(file_path + '.src'):
                    logger.error(
                        u"Can't replace watermarked file: Failed to find original or source file %s of batch %s"
                        % (unicode(file_path + '.src'), batch_id))
                    continue
                os.rename(file_path + '.src', file_path)
        except Exception:
            current_app.logger.exception(u"FAILED TO REPLACE WATERMARKED DOCS")

        if current_app.config.get('PROD', False):
            appcraft.send_stat(batch.batch_type + '_payment_received',
                               batch._owner, batch.id, batch.batch_type,
                               int(invoice_id))
            mixpanel_metrics.send_stat(batch.batch_type + '_payment_received',
                                       batch._owner, batch.id,
                                       batch.batch_type)

        try:
            if batch.batch_type == DocumentBatchTypeEnum.DBT_NEW_LLC:
                BatchManager.send_batch_docs_to_user(batch_id,
                                                     current_app.config)
        except Exception:
            logger.exception(u"Failed to send documents to user.")
    elif subs_type:
        user_subs = PaymentSubscriptionObject.query.filter(
            PaymentSubscriptionObject.user == user,
            PaymentSubscriptionObject.end_dt.__ge__(datetime.utcnow()))

        if not user_subs.count():
            end_date = datetime.utcnow()
            if subs_type == 'subscription_3':
                end_date += relativedelta(months=3)
            elif subs_type == 'subscription_1':
                end_date += relativedelta(months=1)

            new_subs = PaymentSubscriptionObject(pay_info=pay_info,
                                                 created=datetime.utcnow(),
                                                 end_dt=end_date,
                                                 user=user,
                                                 type=subs_type)
            sqldb.session.add(new_subs)
            sqldb.session.commit()

            from fw.async_tasks import not_paid_check_send

            not_paid_check_send.make_all_user_fin_batch_paid_and_replace_watermarked_docs_with_normal.delay(
                user_id=user.id)

    current_app.logger.info(u"yad - success")
    return _xml_resp(success_result)
Пример #24
0
def render_single_document(db_doc, doc_title, watermark, config, logger, task_id, render_doc_file):
    doc_id = db_doc.id

    doc_type = db_doc.document_type
    owner = db_doc._owner
    if not db_doc:
        logger.info(u"Exit 1")
        return False

    from fw.documents.doc_builder import DocBuilder

    if db_doc._celery_task_id is None:
        db_doc._celery_task_started = datetime.utcnow()
        db_doc._celery_task_id = task_id
        sqldb.session.commit()
    elif db_doc._celery_task_id != task_id:
        if db_doc._celery_task_started and abs((datetime.utcnow() - db_doc._celery_task_started).total_seconds()) > 60:
            db_doc._celery_task_started = datetime.utcnow()
            db_doc._celery_task_id = task_id
            sqldb.session.commit()
        else:
            logger.info(u"Exit 2")
            return False

    user_doc = UserDocument.db_obj_to_field(db_doc)
    try:
        doc_data = user_doc.get_db_object_data()["data"]
        db_doc.status = UserDocumentStatus.DS_RENDERING
        db_doc.tried_to_render = True
        sqldb.session.commit()
        result = DocBuilder.process(doc_data, doc_type, config, owner.id, add_watermark=watermark, render_doc_file=render_doc_file)
        if result:
            current_doc = BatchDocumentDbObject.query.filter_by(id=doc_id).scalar()
            if not current_doc or current_doc._celery_task_id != task_id:
                logger.warn(u"Failed to set result: user document has been captured by another task")
                logger.info(u"Exit 3")
                return False

            for doc_file in db_doc.files:
                old_file_id = doc_file.id
                FileStorage.remove_file(old_file_id, config)
                db_doc.files.remove(doc_file)

            file_id = None
            for file_id in result:
                new_doc_file = DocumentFilesObject(doc_id=doc_id, files_id=file_id)
                sqldb.session.add(new_doc_file)

            if file_id:
                updated_count = BatchDocumentDbObject.query.filter_by(id=doc_id, _celery_task_id=task_id).update({
                    'status': UserDocumentStatus.DS_RENDERED,
                    'caption': doc_title,
                    'pages_count': FileStorage.get_pdf_file_page_count(file_id, config)
                })
                if not updated_count:
                    logger.warn(u"Failed to set result: user document has been captured by another task 2")
                    logger.info(u"Exit 4")
                    sqldb.session.rollback()
                    return False

            sqldb.session.commit()
            logger.info(u"Exit 5")
            return True
        else:
            raise Exception(u"Failed to generate document %s" % doc_type)
    except Exception, ex:
        logger.exception(u"Failed to render document %s" % doc_type)
        db_doc.status = UserDocumentStatus.DS_RENDERING_FAILED
        sqldb.session.commit()
        try:
            error_message = ex.message if isinstance(ex.message, unicode) else unicode(ex.message, errors='ignore')
            logger.exception(error_message)
        except Exception:
            logger.error(u"Failed to make error")
Пример #25
0
def render_batch_document_raw(batch_db_object_id, doc_id, config):
    start_time = datetime.utcnow()
    request_id = current_task.request.id
    logger = celery.log.get_default_logger()
    logger.info(u"Starting rendering document %s of %s" %
                (doc_id, batch_db_object_id))
    target_document = BatchDocumentDbObject.query.filter_by(id=doc_id).scalar()
    if not target_document:
        logger.warn(u" - O_o - ")
        return False

    if celery.conf['CELERY_ALWAYS_EAGER']:
        request_id = "test"
        target_document._celery_task_id = request_id
        target_document._celery_task_started = start_time

    logger.info(u"doc type of %s is %s" %
                (doc_id, target_document.document_type))
    if target_document and target_document.status == UserDocumentStatus.DS_RENDERING:
        assert (target_document._celery_task_id)
        assert (target_document._celery_task_started)
        if target_document._celery_task_id != request_id:
            logger.info(u" - B - ")
            if abs(
                (datetime.utcnow() -
                 target_document._celery_task_started).total_seconds()) < 60:
                logger.info(u" - C - ")
                logger.info(
                    u"Task for rendering %s of %s is already being run. Exiting..."
                    % (doc_id, batch_db_object_id))
                return True

        result = BatchDocumentDbObject.query.filter_by(
            id=doc_id, status=UserDocumentStatus.DS_RENDERING).update({
                '_celery_task_id':
                request_id,
                '_celery_task_started':
                start_time
            })
        sqldb.session.commit()

        if not result:
            logger.error(
                u"Failed to change status of document being rendered into RENDERING state. \n"
                u"Probably document is being generated now already 1")
            return True

    logger.info(u" - F - ")
    batch_db_object = DocumentBatchDbObject.query.filter_by(
        id=batch_db_object_id).scalar()
    if not batch_db_object:
        logger.error(u"Failed to find batch with id %s" % batch_db_object_id)
        return True

    from fw.documents.batch_manager import BatchManager

    owner_id = batch_db_object._owner_id

    logger.info(u" - I - ")
    if target_document.file:
        file_obj = target_document.file
        target_document.file = None
        FileStorage.remove_file(file_obj.id, config)

    BatchDocumentDbObject.query.filter_by(id=target_document.id).update({
        'file_id':
        None,
        'status':
        UserDocumentStatus.DS_RENDERING,
        'data': {},
        '_celery_task_id':
        request_id,
        '_celery_task_started':
        start_time,
        'tried_to_render':
        True
    })
    sqldb.session.commit()
    target_document = BatchDocumentDbObject.query.filter_by(
        id=target_document.id).scalar()
    logger.info(u" - J updated %s - " % target_document.id)

    try:
        target_document = UserDocument.db_obj_to_field(target_document)
        _ = batch_db_object.data
        detached_batch = batch_db_object
        sqldb.session.expunge(detached_batch)
        make_transient(detached_batch)

        target_document_data = BatchManager.make_document(
            detached_batch, target_document.document_type.db_value())
        batch_db_object = DocumentBatchDbObject.query.filter_by(
            id=batch_db_object_id).scalar()

        logger.info(u" - T - ")
        if not target_document_data:
            logger.info(u" - U - ")
            BatchDocumentDbObject.query.filter_by(
                id=doc_id, _celery_task_id=request_id).update({
                    'status':
                    UserDocumentStatus.DS_RENDERING_FAILED,
                    '_celery_task_id':
                    None,
                    '_celery_task_started':
                    None
                })
            sqldb.session.commit()
            return True

        target_document.data.value = target_document_data
        target_document.data.initialized = True

        doc_data = target_document.get_db_object_data()["data"]
        result = BatchDocumentDbObject.query.filter_by(
            id=doc_id, _celery_task_id=request_id).update({'data': doc_data})
        sqldb.session.commit()

        # batch_descriptor = DocRequisitiesStorage.get_batch_descriptor(batch_db_object.batch_type)
        # validator_condition_schema = batch_descriptor.get('validation_condition', None)
        # from fw.documents.schema.var_construction import VarConstructorFactory
        # validator_condition = VarConstructorFactory.make_constructor(validator_condition_schema) if validator_condition_schema else None
        #
        # validation_type = ValidationTypeEnum.VT_STRICT
        #
        # if validator_condition:
        #     context = {
        #         '<document>': target_document,
        #         '<batch>': batch_db_object
        #     }
        #     validation_type = validator_condition.build(context)
        #
        # if validation_type != ValidationTypeEnum.VT_NO:
        #     target_document.validate(strict=(validation_type == ValidationTypeEnum.VT_STRICT))

        target_document.validate(strict=True)
        logger.info(u" - V - ")
    except Exception, ex:
        logger.info(u" - W - ")
        logger.exception(u"Failed to make document %s from batch %s" %
                         (doc_id, batch_db_object_id))
        ext_data = []
        if getattr(ex, 'ext_data', None):
            ext_data.extend(ex.ext_data)
        if ext_data:
            error_info_ext = error_tree_to_list(ext_data)
            error_info_ext = [{
                'field':
                '.'.join(i['field'].split('.')[1:])
                if '.' in i['field'] else i['field'],
                'error_code':
                i['error_code']
            } for i in error_info_ext]
            if not batch_db_object.error_info or 'error_ext' not in batch_db_object.error_info:
                batch_db_object.error_info = {'error_ext': error_info_ext}
            else:
                error_info_fields_set = set([
                    i['field'] for i in batch_db_object.error_info['error_ext']
                ])
                merged_error_info = copy(batch_db_object.error_info)
                for i in error_info_ext:
                    if i['field'] not in error_info_fields_set:
                        merged_error_info['error_ext'].append({
                            'field':
                            i['field'],
                            'error_code':
                            i['error_code']
                        })
                sqldb.session.commit()
                batch_db_object.error_info = merged_error_info

        logger.info(u" - pre YY -> XX: %s - " % str(doc_id))

        result = BatchDocumentDbObject.query.filter_by(
            id=doc_id, _celery_task_id=request_id).update({
                'status':
                UserDocumentStatus.DS_RENDERING_FAILED,
                '_celery_task_id':
                None,
                '_celery_task_started':
                None
            })
        sqldb.session.commit()
        if not result:
            logger.warn(u"Failed to mark rendering document as failed")
            logger.info(u" - X - ")

        logger.info(u" - XX - ")
        return True
Пример #26
0
def render_single_document(db_doc, doc_title, watermark, config, logger,
                           task_id, render_doc_file):
    doc_id = db_doc.id

    doc_type = db_doc.document_type
    owner = db_doc._owner
    if not db_doc:
        logger.info(u"Exit 1")
        return False

    from fw.documents.doc_builder import DocBuilder

    if db_doc._celery_task_id is None:
        db_doc._celery_task_started = datetime.utcnow()
        db_doc._celery_task_id = task_id
        sqldb.session.commit()
    elif db_doc._celery_task_id != task_id:
        if db_doc._celery_task_started and abs(
            (datetime.utcnow() -
             db_doc._celery_task_started).total_seconds()) > 60:
            db_doc._celery_task_started = datetime.utcnow()
            db_doc._celery_task_id = task_id
            sqldb.session.commit()
        else:
            logger.info(u"Exit 2")
            return False

    user_doc = UserDocument.db_obj_to_field(db_doc)
    try:
        doc_data = user_doc.get_db_object_data()["data"]
        db_doc.status = UserDocumentStatus.DS_RENDERING
        db_doc.tried_to_render = True
        sqldb.session.commit()
        result = DocBuilder.process(doc_data,
                                    doc_type,
                                    config,
                                    owner.id,
                                    add_watermark=watermark,
                                    render_doc_file=render_doc_file)
        if result:
            current_doc = BatchDocumentDbObject.query.filter_by(
                id=doc_id).scalar()
            if not current_doc or current_doc._celery_task_id != task_id:
                logger.warn(
                    u"Failed to set result: user document has been captured by another task"
                )
                logger.info(u"Exit 3")
                return False

            for doc_file in db_doc.files:
                old_file_id = doc_file.id
                FileStorage.remove_file(old_file_id, config)
                db_doc.files.remove(doc_file)

            file_id = None
            for file_id in result:
                new_doc_file = DocumentFilesObject(doc_id=doc_id,
                                                   files_id=file_id)
                sqldb.session.add(new_doc_file)

            if file_id:
                updated_count = BatchDocumentDbObject.query.filter_by(
                    id=doc_id, _celery_task_id=task_id).update({
                        'status':
                        UserDocumentStatus.DS_RENDERED,
                        'caption':
                        doc_title,
                        'pages_count':
                        FileStorage.get_pdf_file_page_count(file_id, config)
                    })
                if not updated_count:
                    logger.warn(
                        u"Failed to set result: user document has been captured by another task 2"
                    )
                    logger.info(u"Exit 4")
                    sqldb.session.rollback()
                    return False

            sqldb.session.commit()
            logger.info(u"Exit 5")
            return True
        else:
            raise Exception(u"Failed to generate document %s" % doc_type)
    except Exception, ex:
        logger.exception(u"Failed to render document %s" % doc_type)
        db_doc.status = UserDocumentStatus.DS_RENDERING_FAILED
        sqldb.session.commit()
        try:
            error_message = ex.message if isinstance(
                ex.message, unicode) else unicode(ex.message, errors='ignore')
            logger.exception(error_message)
        except Exception:
            logger.error(u"Failed to make error")
Пример #27
0
def yurist_set(batch_id=None, check=None, file_list=None, typos_correction=False):
    typos_correction = bool(typos_correction)
    batch_db = DocumentBatchDbObject.query.filter_by(id=batch_id, _owner=current_user, deleted=False).first()
    if not batch_db:
        raise errors.BatchNotFound()

    if check:
        new = True
        # search for any active check
        cur_check_obj = YuristBatchCheckObject.query.filter(
            YuristBatchCheckObject.batch_id == batch_id,
            YuristBatchCheckObject.status.notin_(YuristBatchCheckStatus.FINAL_STATUSES)
        ).order_by(YuristBatchCheckObject.create_date.desc()).first()

        if cur_check_obj:
            new = False

        real_file_list = []
        file_descr = []
        if file_list:
            try:
                file_list_data = json.loads(file_list)
                for file_obj in file_list_data:
                    file_id = file_obj['id']
                    file_obj = FileStorage.get_file(file_id)
                    if file_obj:
                        real_file_list.append(file_obj)
                    else:
                        current_app.logger.warn(u"Failed to find file with id %s" % file_id)
            except Exception:
                current_app.logger.exception(u"Failed to parse file list: %s" % file_list)
        # Insert new check
        if new:
            yurist_batch_check = YuristBatchCheckObject(**{
                'batch_id': batch_id,
                'create_date': datetime.utcnow(),
                'status': YuristBatchCheckStatus.YBS_WAIT,
                'typos_correction': typos_correction
            })
            sqldb.session.add(yurist_batch_check)
            for file_obj in real_file_list:
                attach = YuristCheckFilesObject()
                attach.files_id = file_obj.id
                yurist_batch_check.attached_files.append(attach)
        else:
            YuristCheckFilesObject.query.filter_by(check_id=cur_check_obj.id).delete()
            for file_obj in real_file_list:
                attach = YuristCheckFilesObject()
                attach.files_id = file_obj.id
                cur_check_obj.attached_files.append(attach)
            cur_check_obj.create_date = datetime.utcnow()
            cur_check_obj.typos_correction = typos_correction
            cur_check_obj.status = YuristBatchCheckStatus.YBS_WAIT

        sqldb.session.commit()
        yurist_manager.yurist_check(current_app.config, batch_db, real_file_list, current_app.logger)
    else:
        # search for active check
        cur_check_obj = YuristBatchCheckObject.query.filter(
            YuristBatchCheckObject.batch_id == batch_id,
            YuristBatchCheckObject.status.notin_(YuristBatchCheckStatus.FINAL_STATUSES)
        ).order_by(YuristBatchCheckObject.create_date.desc()).first()
        # If found any: set status to refused
        if cur_check_obj:
            cur_check_obj.status = YuristBatchCheckStatus.YBS_REFUSED
            sqldb.session.commit()
            return {'result': True}

    return {'result': True}