Пример #1
0
def my_ffdc():
    r"""
    Collect FFDC data.
    """

    global state

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='ffdc', stop_on_plug_in_failure=0)

    AUTOBOOT_FFDC_PREFIX = os.environ['AUTOBOOT_FFDC_PREFIX']
    status, ffdc_file_list = grk.run_key_u(
        "FFDC  ffdc_prefix=" + AUTOBOOT_FFDC_PREFIX + "  ffdc_function_list=" +
        ffdc_function_list,
        ignore=1)
    if status != 'PASS':
        gp.qprint_error("Call to ffdc failed.\n")
        if type(ffdc_file_list) is not list:
            ffdc_file_list = []
        # Leave a record for caller that "soft" errors occurred.
        soft_errors = 1
        gpu.save_plug_in_value(soft_errors, pgm_name)

    my_get_state()

    print_defect_report(ffdc_file_list)
Пример #2
0
def post_stack():
    r"""
    Process post_stack plug-in programs.
    """

    if not call_post_stack_plug:
        # The caller does not wish to have post_stack plug-in processing done.
        return

    global boot_success

    # NOTE: A post_stack call-point failure is NOT counted as a boot failure.
    pre_boot_plug_in_setup()
    # For the purposes of the following plug-ins, mark the "boot" as a success.
    boot_success = 1
    plug_in_setup()
    rc, shell_rc, failed_plug_in_name, history =\
        grpi.rprocess_plug_in_packages(call_point='post_stack',
                                       stop_on_plug_in_failure=0,
                                       return_history=True)
    last_ten.extend(history)
    # Trim list to max number of entries.
    del last_ten[:max(0, len(last_ten) - max_boot_history)]
    if rc != 0:
        boot_success = 0

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name =\
        grpi.rprocess_plug_in_packages(call_point='ffdc_check',
                                       shell_rc=dump_ffdc_rc(),
                                       stop_on_plug_in_failure=1,
                                       stop_on_non_zero_rc=1)
    if shell_rc == dump_ffdc_rc():
        status, ret_values = grk.run_key_u("my_ffdc", ignore=1)
        if status != 'PASS':
            gp.qprint_error("Call to my_ffdc failed.\n")
            # Leave a record for caller that "soft" errors occurred.
            soft_errors = 1
            gpu.save_plug_in_value(soft_errors, pgm_name)

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='stop_check',
        shell_rc=stop_test_rc(),
        stop_on_non_zero_rc=1)
    if shell_rc == stop_test_rc():
        message = "Stopping as requested by user.\n"
        gp.print_time(message)
        BuiltIn().fail(message)
def my_ffdc():
    r"""
    Collect FFDC data.
    """

    global state

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='ffdc', stop_on_plug_in_failure=0)

    AUTOBOOT_FFDC_PREFIX = os.environ['AUTOBOOT_FFDC_PREFIX']
    status, ret_values = grk.run_key_u(
        "FFDC  ffdc_prefix=" + AUTOBOOT_FFDC_PREFIX + "  ffdc_function_list=" +
        ffdc_function_list,
        ignore=1)
    if status != 'PASS':
        gp.qprint_error("Call to ffdc failed.\n")

    my_get_state()

    print_defect_report()
def my_ffdc():
    r"""
    Collect FFDC data.
    """

    global state

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='ffdc', stop_on_plug_in_failure=0)

    AUTOBOOT_FFDC_PREFIX = os.environ['AUTOBOOT_FFDC_PREFIX']
    status, ffdc_file_list = grk.run_key_u("FFDC  ffdc_prefix="
                                           + AUTOBOOT_FFDC_PREFIX
                                           + "  ffdc_function_list="
                                           + ffdc_function_list, ignore=1)
    if status != 'PASS':
        gp.qprint_error("Call to ffdc failed.\n")

    my_get_state()

    print_defect_report(ffdc_file_list)
def test_loop_body():
    r"""
    The main loop body for the loop in main_py.

    Description of arguments:
    boot_count  The iteration number (starts at 1).
    """

    global boot_count
    global state
    global next_boot
    global boot_success
    global boot_end_time

    gp.qprintn()

    next_boot = select_boot()
    if next_boot == "":
        return True

    boot_count += 1
    gp.qprint_timen("Starting boot " + str(boot_count) + ".")

    pre_boot_plug_in_setup()

    cmd_buf = ["run_boot", next_boot]
    boot_status, msg = BuiltIn().run_keyword_and_ignore_error(*cmd_buf)
    if boot_status == "FAIL":
        gp.qprint(msg)

    gp.qprintn()
    if boot_status == "PASS":
        boot_success = 1
        completion_msg = gp.sprint_timen("BOOT_SUCCESS: \"" + next_boot +
                                         "\" succeeded.")
    else:
        boot_success = 0
        completion_msg = gp.sprint_timen("BOOT_FAILED: \"" + next_boot +
                                         "\" failed.")

    # Set boot_end_time for use by plug-ins.
    boot_end_time = completion_msg[1:33]
    gp.qprint_var(boot_end_time)

    gp.qprint(completion_msg)

    boot_results.update(next_boot, boot_status)

    plug_in_setup()
    # NOTE: A post_test_case call point failure is NOT counted as a boot
    # failure.
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='post_test_case', stop_on_plug_in_failure=0)

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='ffdc_check',
        shell_rc=0x00000200,
        stop_on_plug_in_failure=1,
        stop_on_non_zero_rc=1)
    if boot_status != "PASS" or ffdc_check == "All" or shell_rc == 0x00000200:
        status, ret_values = grk.run_key_u("my_ffdc", ignore=1)
        if status != 'PASS':
            gp.qprint_error("Call to my_ffdc failed.\n")

    # We need to purge error logs between boots or they build up.
    grk.run_key("Delete Error logs", ignore=1)

    boot_results.print_report()
    gp.qprint_timen("Finished boot " + str(boot_count) + ".")

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='stop_check')
    if rc != 0:
        error_message = "Stopping as requested by user.\n"
        grp.rprint_error_report(error_message)
        BuiltIn().fail(error_message)

    # This should help prevent ConnectionErrors.
    grk.run_key_u("Close All Connections")

    return True
def test_loop_body():
    r"""
    The main loop body for the loop in main_py.

    Description of arguments:
    boot_count  The iteration number (starts at 1).
    """

    global boot_count
    global state
    global next_boot
    global boot_success
    global boot_end_time

    gp.qprintn()

    next_boot = select_boot()
    if next_boot == "":
        return True

    boot_count += 1
    gp.qprint_timen("Starting boot " + str(boot_count) + ".")

    pre_boot_plug_in_setup()

    cmd_buf = ["run_boot", next_boot]
    boot_status, msg = BuiltIn().run_keyword_and_ignore_error(*cmd_buf)
    if boot_status == "FAIL":
        gp.qprint(msg)

    gp.qprintn()
    if boot_status == "PASS":
        boot_success = 1
        completion_msg = gp.sprint_timen("BOOT_SUCCESS: \"" + next_boot
                                         + "\" succeeded.")
    else:
        boot_success = 0
        completion_msg = gp.sprint_timen("BOOT_FAILED: \"" + next_boot
                                         + "\" failed.")

    # Set boot_end_time for use by plug-ins.
    boot_end_time = completion_msg[1:33]
    gp.qprint_var(boot_end_time)

    gp.qprint(completion_msg)

    boot_results.update(next_boot, boot_status)

    plug_in_setup()
    # NOTE: A post_test_case call point failure is NOT counted as a boot
    # failure.
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='post_test_case', stop_on_plug_in_failure=0)

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='ffdc_check', shell_rc=dump_ffdc_rc(),
        stop_on_plug_in_failure=1, stop_on_non_zero_rc=1)
    if ffdc_check == "All" or\
       shell_rc == dump_ffdc_rc():
        status, ret_values = grk.run_key_u("my_ffdc", ignore=1)
        if status != 'PASS':
            gp.qprint_error("Call to my_ffdc failed.\n")
            # Leave a record for caller that "soft" errors occurred.
            soft_errors = 1
            gpu.save_plug_in_value(soft_errors, pgm_name)

    if delete_errlogs:
        # print error logs before delete
        status, error_logs = grk.run_key_u("Get Error Logs")
        pels = pel.peltool("-l", ignore_err=1)
        log.print_error_logs(error_logs, "AdditionalData Message Severity")
        gp.qprint_var(pels)

        # We need to purge error logs between boots or they build up.
        grk.run_key(delete_errlogs_cmd, ignore=1)
        grk.run_key(delete_bmcdump_cmd, ignore=1)

    boot_results.print_report()
    gp.qprint_timen("Finished boot " + str(boot_count) + ".")

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='stop_check', shell_rc=stop_test_rc(),
        stop_on_non_zero_rc=1)
    if shell_rc == stop_test_rc():
        message = "Stopping as requested by user.\n"
        gp.qprint_time(message)
        BuiltIn().fail(message)

    # This should help prevent ConnectionErrors.
    # Purge all redfish and REST connection sessions.
    if redfish_delete_sessions:
        grk.run_key_u("Close All Connections", ignore=1)
        grk.run_key_u("Delete All Redfish Sessions", ignore=1)

    return True
def test_loop_body():
    r"""
    The main loop body for the loop in main_py.

    Description of arguments:
    boot_count  The iteration number (starts at 1).
    """

    global boot_count
    global state
    global next_boot
    global boot_success
    global boot_end_time

    gp.qprintn()

    next_boot = select_boot()
    if next_boot == "":
        return True

    boot_count += 1
    gp.qprint_timen("Starting boot " + str(boot_count) + ".")

    pre_boot_plug_in_setup()

    cmd_buf = ["run_boot", next_boot]
    boot_status, msg = BuiltIn().run_keyword_and_ignore_error(*cmd_buf)
    if boot_status == "FAIL":
        gp.qprint(msg)

    gp.qprintn()
    if boot_status == "PASS":
        boot_success = 1
        completion_msg = gp.sprint_timen("BOOT_SUCCESS: \"" + next_boot
                                         + "\" succeeded.")
    else:
        boot_success = 0
        completion_msg = gp.sprint_timen("BOOT_FAILED: \"" + next_boot
                                         + "\" failed.")

    # Set boot_end_time for use by plug-ins.
    boot_end_time = completion_msg[1:33]
    gp.qprint_var(boot_end_time)

    gp.qprint(completion_msg)

    boot_results.update(next_boot, boot_status)

    plug_in_setup()
    # NOTE: A post_test_case call point failure is NOT counted as a boot
    # failure.
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='post_test_case', stop_on_plug_in_failure=0)

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='ffdc_check', shell_rc=0x00000200,
        stop_on_plug_in_failure=1, stop_on_non_zero_rc=1)
    if boot_status != "PASS" or ffdc_check == "All" or shell_rc == 0x00000200:
        status, ret_values = grk.run_key_u("my_ffdc", ignore=1)
        if status != 'PASS':
            gp.qprint_error("Call to my_ffdc failed.\n")

    if delete_errlogs:
        # We need to purge error logs between boots or they build up.
        grk.run_key("Delete Error logs", ignore=1)

    boot_results.print_report()
    gp.qprint_timen("Finished boot " + str(boot_count) + ".")

    plug_in_setup()
    rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
        call_point='stop_check', shell_rc=0x00000200, stop_on_non_zero_rc=1)
    if shell_rc == 0x00000200:
        message = "Stopping as requested by user.\n"
        gp.print_time(message)
        BuiltIn().fail(message)

    # This should help prevent ConnectionErrors.
    grk.run_key_u("Close All Connections")

    return True