def t1decay_ge(num_patterns=101, sweep_time=5000): # PMH
sw_setup = setup_seq_writer()
pat = get_pattern_parameters()
expt_cal = expt_parameters.get_expt_cal()
#
seq = gen.Sequence(pat.pat_length, num_patterns)
# pi ge
p = gen.Pulse(start=pat.final_pulse_end,
duration=-expt_cal.pi_time.ge,
amplitude=expt_cal.pi_amp.ge,
ssm_freq=expt_cal.ssm.ge)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='start',
start=0,
stop=-sweep_time)
# add readout pulses, triggers, and marker gates
seq = add_readout_markers_and_gates(seq=seq, pat=pat)
#
the_seq = seq
#
print("Patterns: {}".format(the_seq.num_steps))
the_seq.write_sequence()
the_seq.load_sequence(sw_setup.address_awg)
wx_programs.wx_set_and_amplitude_and_offset()
def rabi_ef_prep_e(num_patterns=51, sweep_time=200, rabi_amp=0.5): # PMH
sw_setup = setup_seq_writer()
pat = get_pattern_parameters()
expt_cal = expt_parameters.get_expt_cal()
#
seq = gen.Sequence(pat.pat_length, num_patterns)
# pi ge
p = gen.Pulse(start=pat.final_pulse_end,
duration=-expt_cal.pi_time.ge,
amplitude=expt_cal.pi_amp.ge,
ssm_freq=expt_cal.ssm.ge,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='start',
start=0,
stop=-sweep_time,
channel_pair=expt_cal.channel_pair.ge)
# rabi ef
p = gen.Pulse(start=pat.final_pulse_end,
duration=0,
amplitude=rabi_amp,
ssm_freq=expt_cal.ssm.ef,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='width',
start=0,
stop=-sweep_time,
channel_pair=expt_cal.channel_pair.ef)
# add readout pulses, triggers, and marker gates
seq = add_readout_markers_and_gates(seq=seq, pat=pat)
#
the_seq = seq
#
print("Patterns: {}".format(the_seq.num_steps))
the_seq.write_sequence()
the_seq.load_sequence(sw_setup.address_awg)
wx_programs.wx_set_and_amplitude_and_offset()
def calibrate_mixer_ch1ch2(mixer_orthog_deg=90.): # PMH
sw_setup = setup_seq_writer()
pat = get_pattern_parameters()
expt_cal = expt_parameters.get_expt_cal()
#
num_patterns = 3
pulse_amp = 0.25
pulse_ssb = expt_cal.ssm.ef
#
end_time = pat.final_pulse_end
#
seq = gen.Sequence(pat.pat_length, num_patterns)
# pi ge
p = gen.Pulse(start=pat.pat_length,
duration=-pat.pat_length,
amplitude=pulse_amp,
ssm_freq=pulse_ssb,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='none',
channel_pair='ch3ch4')
# add readout pulses, triggers, and marker gates
seq = add_readout_markers_and_gates(seq=seq, pat=pat)
#
the_seq = seq
#
print("Patterns: {}".format(the_seq.num_steps))
the_seq.write_sequence()
the_seq.load_sequence(sw_setup.address_awg)
wx_programs.wx_set_and_amplitude_and_offset()
wx_programs.set_run_mode_continuous()
def calibrate_mixer_readout(): # PMH
sw_setup = setup_seq_writer()
pat = get_pattern_parameters()
expt_cal = expt_parameters.get_expt_cal()
#
num_patterns = 3
#
seq = gen.Sequence(pat.pat_length, num_patterns)
# readout pulse
main_pulse = gen.Pulse(start=0,
duration=pat.pat_length,
amplitude=pat.readout_amplitude)
seq.add_sweep(channel=1,
marker=2,
sweep_name='none',
initial_pulse=main_pulse)
## markers
readout_trigger = gen.Pulse(start=0, duration=pat.pat_length, amplitude=1)
seq.add_sweep(channel=3,
marker=1,
sweep_name='none',
initial_pulse=readout_trigger)
#
the_seq = seq
#
print("Patterns: {}".format(the_seq.num_steps))
the_seq.write_sequence()
the_seq.load_sequence(sw_setup.address_awg)
wx_programs.wx_set_and_amplitude_and_offset()
def g_e_f(): # PMH
sw_setup = setup_seq_writer()
pat = get_pattern_parameters()
expt_cal = expt_parameters.get_expt_cal()
#
num_patterns = 1
end_time = pat.final_pulse_end
# no pulse
seq = gen.Sequence(pat.pat_length, num_patterns)
p = gen.Pulse(start=end_time, duration=-10, amplitude=0)
seq = add_iq_pulse_sweep(seq=seq, pulse=p, sweep_name='none')
# add readout pulses, triggers, and marker gates
seq = add_readout_markers_and_gates(seq=seq, pat=pat)
#
the_seq = seq
# pi-ge
seq = gen.Sequence(pat.pat_length, num_patterns)
p = gen.Pulse(start=end_time,
duration=-expt_cal.pi_time.ge,
amplitude=expt_cal.pi_amp.ge,
ssm_freq=expt_cal.ssm.ge,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='none',
channel_pair=expt_cal.channel_pair.ge)
# add readout pulses, triggers, and marker gates
seq = add_readout_markers_and_gates(seq=seq, pat=pat)
#
the_seq = the_seq.__add__(seq)
# pi-ge, pi-ef
seq = gen.Sequence(pat.pat_length, num_patterns)
p = gen.Pulse(start=end_time - expt_cal.pi_time.ef,
duration=-expt_cal.pi_time.ge,
amplitude=expt_cal.pi_amp.ge,
ssm_freq=expt_cal.ssm.ge,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='none',
channel_pair=expt_cal.channel_pair.ge)
p = gen.Pulse(start=end_time,
duration=-expt_cal.pi_time.ef,
amplitude=expt_cal.pi_amp.ef,
ssm_freq=expt_cal.ssm.ef,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='none',
channel_pair=expt_cal.channel_pair.ef)
# add readout pulses, triggers, and marker gates
seq = add_readout_markers_and_gates(seq=seq, pat=pat)
#
the_seq = the_seq.__add__(seq)
#
print("Patterns: {}".format(the_seq.num_steps))
the_seq.write_sequence()
the_seq.load_sequence(sw_setup.address_awg)
wx_programs.wx_set_and_amplitude_and_offset()
def rabi_ef_prep_f_fnotf(num_patterns=51,
sweep_time=200,
rabi_amp=0.5,
rabi_ssb_freq=None): # PMH
sw_setup = setup_seq_writer()
pat = get_pattern_parameters()
expt_cal = expt_parameters.get_expt_cal()
if rabi_ssb_freq is None:
rabi_ssb_freq = expt_cal.ssm.ef
#
t_end = pat.final_pulse_end
t_wait = 0 # delay between pulses
t_p = expt_cal.pi_time.ef
## without pi-pulse f
#
seq = gen.Sequence(pat.pat_length, num_patterns)
# pi ge
start = t_end - t_wait - t_p
p = gen.Pulse(start=start,
duration=-expt_cal.pi_time.ge,
amplitude=expt_cal.pi_amp.ge,
ssm_freq=expt_cal.ssm.ge,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='start',
start=0,
stop=-sweep_time,
channel_pair=expt_cal.channel_pair.ge)
# pi ef
start = t_end
p = gen.Pulse(start=start,
duration=-expt_cal.pi_time.ef,
amplitude=expt_cal.pi_amp.ef,
ssm_freq=expt_cal.ssm.ef,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='start',
start=0,
stop=-sweep_time,
channel_pair=expt_cal.channel_pair.ef)
# rabi ef
start = t_end
p = gen.Pulse(start=start,
duration=0,
amplitude=rabi_amp,
ssm_freq=rabi_ssb_freq,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='width',
start=0,
stop=-sweep_time,
channel_pair='ch1ch2')
# add readout pulses, triggers, and marker gates
seq = add_readout_markers_and_gates(seq=seq, pat=pat)
#
the_seq = seq
## with pi-pulse f
#
seq = gen.Sequence(pat.pat_length, num_patterns)
# pi ge
start = t_end - t_wait - t_p - t_wait - t_p
p = gen.Pulse(start=start,
duration=-expt_cal.pi_time.ge,
amplitude=expt_cal.pi_amp.ge,
ssm_freq=expt_cal.ssm.ge,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='start',
start=0,
stop=-sweep_time,
channel_pair=expt_cal.channel_pair.ge)
# pi ef
start = t_end - t_wait - t_p
p = gen.Pulse(start=start,
duration=-t_p,
amplitude=expt_cal.pi_amp.ef,
ssm_freq=expt_cal.ssm.ef,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='start',
start=0,
stop=-sweep_time,
channel_pair=expt_cal.channel_pair.ef)
# rabi ef
start = t_end - t_wait - t_p
p = gen.Pulse(start=start,
duration=0,
amplitude=rabi_amp,
ssm_freq=rabi_ssb_freq,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='width',
start=0,
stop=-sweep_time,
channel_pair='ch1ch2')
# pi ef
start = t_end
p = gen.Pulse(start=start,
duration=-t_p,
amplitude=expt_cal.pi_amp.ef,
ssm_freq=expt_cal.ssm.ef,
phase=0)
seq = add_iq_pulse_sweep(seq=seq,
pulse=p,
sweep_name='start',
start=0,
stop=-sweep_time,
channel_pair=expt_cal.channel_pair.ef)
# add readout pulses, triggers, and marker gates
seq = add_readout_markers_and_gates(seq=seq, pat=pat)
#
the_seq.__add__(seq)
#
print("Patterns: {}".format(the_seq.num_steps))
the_seq.write_sequence()
the_seq.load_sequence(sw_setup.address_awg)
wx_programs.wx_set_and_amplitude_and_offset()