def import_csv(fn,orig,datatext=None):
# lat lon
yy=orig.split(',')
origin=(float(yy[0]),float(yy[1]))
data=[]
if len(datatext) <> 0:
lines=datatext.split('\n')
for l in lines:
pp=re.split("( )+",l)
print pp
print len(pp)
if len(pp)==1:
continue
if len(pp)<3:
raise Exception("Syntax error in 'direct Data input'")
data.append([str(pp[0]),str(pp[2])])
print(data)
else:
with open(fn, 'rb') as csvfile:
reader = csv.reader(csvfile, delimiter=';')
for row in reader:
print ', '.join(row)
data.append(row)
print data
tm=TransverseMercator()
tm.lat=origin[0]
tm.lon=origin[1]
center=tm.fromGeographic(tm.lat,tm.lon)
points=[]
for p in data:
lat,lon = p[0],p[1]
ll=tm.fromGeographic(float(lat),float(lon))
points.append( FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],0.0))
import Draft
points.append(points[0])
Draft.makeWire(points)
po=App.ActiveDocument.ActiveObject
po.ViewObject.LineColor=(1.0,0.0,0.0)
po.MakeFace = False
App.activeDocument().recompute()
Gui.SendMsgToActiveView("ViewFit")
def import_csv(fn, orig, datatext=None):
# lat lon
yy = orig.split(',')
origin = (float(yy[0]), float(yy[1]))
data = []
if len(datatext) <> 0:
lines = datatext.split('\n')
for l in lines:
pp = re.split("( )+", l)
print pp
print len(pp)
if len(pp) == 1:
continue
if len(pp) < 3:
raise Exception("Syntax error in 'direct Data input'")
data.append([str(pp[0]), str(pp[2])])
print(data)
else:
with open(fn, 'rb') as csvfile:
reader = csv.reader(csvfile, delimiter=';')
for row in reader:
print ', '.join(row)
data.append(row)
print data
tm = TransverseMercator()
tm.lat = origin[0]
tm.lon = origin[1]
center = tm.fromGeographic(tm.lat, tm.lon)
points = []
for p in data:
lat, lon = p[0], p[1]
ll = tm.fromGeographic(float(lat), float(lon))
points.append(FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1],
0.0))
import Draft
points.append(points[0])
Draft.makeWire(points)
po = App.ActiveDocument.ActiveObject
po.ViewObject.LineColor = (1.0, 0.0, 0.0)
po.MakeFace = False
App.activeDocument().recompute()
Gui.SendMsgToActiveView("ViewFit")
import urllib.request
else:
import urllib2
import json, time
import pivy
from pivy import coin
import geodat.transversmercator
from geodat.transversmercator import TransverseMercator
import inventortools
from geodat.say import *
#\cond
tm = TransverseMercator()
#\endcond
## get the height of point
# @param b latitude
# @param l longitude
'''
f='https://maps.googleapis.com/maps/api/elevation/json?locations=50.3377879,11.2104096'
response = urllib2.urlopen(f)
'''
def getheight(b, l):
source = "https://maps.googleapis.com/maps/api/elevation/json?locations=" + str(
b) + ',' + str(l)
say(source)
def import_gpx(filename, orig, hi):
'''import a gpx trackfile'''
global sd
# content=trackstring
# fn='/home/microelly2/FCB/b202_gmx_tracks/im_haus.gpx'
# filename='/home/microelly2/FCB/b202_gmx_tracks/neufang.gpx'
f = open(filename, "r")
c1 = f.read()
import re
content = re.sub('^\<\?[^\>]+\?\>', '', c1)
print(content)
tm = TransverseMercator()
# outdoor inn ...
tm.lat, tm.lon = 50.3736049, 11.191643
if orig != 'auto':
yy = orig.split(',')
origin = (float(yy[0]), float(yy[1]))
tm.lat = origin[0]
tm.lon = origin[1]
# center=tm.fromGeographic(tm.lat,tm.lon)
sd = parse(content)
if debug: print(json.dumps(sd, indent=4))
points = []
points2 = []
points0 = []
px = []
py = []
pz = []
pt = []
startx = None
starty = None
starth = None
FreeCAD.sd = sd
seg = sd['gpx']['trk']['trkseg']
try:
seg['trkpt']
ss = seg
seg = [ss]
except:
pass
lats = []
lons = []
for s in seg:
trkpts = s['trkpt']
for n in trkpts:
lats.append(float(n['@lat']))
lons.append(float(n['@lon']))
print(min(lats), max(lats))
print(min(lons), max(lons))
print((max(lats) + min(lats)) / 2, (max(lons) + min(lons)) / 2)
print((max(lats) - min(lats)) / 2, (max(lons) - min(lons)) / 2)
if orig == 'auto':
tm.lat, tm.lon = (max(lats) + min(lats)) / 2, (max(lons) +
min(lons)) / 2
print("origin:")
print(tm.lat, tm.lon)
print("----------")
for s in seg:
trkpts = s['trkpt']
n = trkpts[0]
center = tm.fromGeographic(tm.lat, tm.lon)
# print(trkpts)
# for p in trkpts:
# print(p)
# map all points to xy-plane
for n in trkpts:
# print(n['@lat'],n['@lon'])
lats.append(float(n['@lat']))
lons.append(float(n['@lon']))
ll = tm.fromGeographic(float(n['@lat']), float(n['@lon']))
h = n['ele']
# print(h)
tim = n['time']
t2 = re.sub('^.*T', '', tim)
t3 = re.sub('Z', '', t2)
t4 = t3.split(':')
timx = int(t4[0]) * 3600 + int(t4[1]) * 60 + int(t4[2])
pt.append(timx)
if starth == None:
starth = float(h)
starth = 0
points.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1],
1000 * (float(h) - starth)))
points.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1], 0))
points.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1],
1000 * (float(h) - starth)))
points2.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1],
1000 * (float(h) - starth) + 20000))
points0.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1], 0))
px.append(ll[0] - center[0])
py.append(ll[1] - center[1])
pz.append(1000 * (float(h) - starth))
# print(ll)
if 1:
import Draft
if 0: #close path
points.append(points[0])
Draft.makeWire(points0)
Draft.makeWire(points)
po = App.ActiveDocument.ActiveObject
po.ViewObject.LineColor = (1.0, .0, 0.0)
po.MakeFace = False
po.Placement.Base.z = float(hi) * 1000
po.Label = "My Track"
Draft.makeWire(points2)
po2 = App.ActiveDocument.ActiveObject
po2.ViewObject.LineColor = (.0, .0, 1.0)
po2.ViewObject.PointSize = 5
po2.ViewObject.PointColor = (.0, 1.0, 1.0)
po2.Placement.Base.z = float(hi) * 1000
po2.Label = "Track + 20m"
App.activeDocument().recompute()
Gui.SendMsgToActiveView("ViewFit")
# break
#------------------------------------------------
# data for postprocessing
return
try:
import numpyNode
import mathplotlibNode
t = mathplotlibNode.createMPL()
t.Label = "My Track raw Data"
# hier werte bereitstellen
t.countSources = 4
t.source1Values = px
t.source2Values = py
t.source3Values = pz
t.source4Values = pt
t.source1Data = "px"
t.source2Data = "py"
t.source3Data = "pz"
t.source4Data = "pt"
t.useOut1 = True
t.useOut2 = True
t.useOut3 = True
t.useOut4 = True
# werte umrechnen
t2 = numpyNode.createNP()
t2.Label = "My Track data processed"
t2.sourceObject = t
t2.expression1 = "in1/np.max(np.abs(in1))"
t2.label1 = "x relative"
t2.expression2 = "in2/np.max(np.abs(in2))"
t2.label2 = "y relative"
t2.expression3 = "in3/np.max(np.abs(in3))"
t2.label3 = "z relative"
t2.expression4 = "-1+2*(in4-np.min(in4))/(np.max(in4)-np.min(in4))"
t2.label4 = "time relative"
# werte grafisch darstellen
t3 = mathplotlibNode.createMPL()
t3.Label = "My Track Data visualization"
t3.record = False
t3.useNumpy = True
t3.sourceNumpy = t2
t3.useOut1 = True
t3.useOut2 = True
t3.useOut3 = True
t3.useOut4 = True
t4 = numpyNode.createNP()
t4.Label = "My Track Data xy"
t4.sourceObject = t
t4.expression2 = "in2"
t4.label2 = "path xy"
t4.expressionTime = "in1"
t5 = mathplotlibNode.createMPL()
t5.Label = "My Track Data xy Map"
t5.record = False
t5.useNumpy = True
t5.sourceNumpy = t4
t5.useOut2 = True
FreeCAD.ActiveDocument.recompute()
except:
sayexc()
return (str(tm.lat) + ',' + str(tm.lon))
return px, py
def getAST(b=50.26,l=11.39):
bs=np.floor(b)
ls=np.floor(l)
# the ast dataset
ff="N%02dE%03d" % (int(bs),int(ls))
fn=FreeCAD.ConfigGet("UserAppData") +'/geodat/AST/ASTGTM2_' + ff +'_dem.tif'
print fn
'''
fn='/home/microelly2/FCB/b217_heightmaps/tandemx_daten/Chile-Chuquicatmata.tif'
b=-22.3054705
l=-68.9259643
bs=np.floor(b)
ls=np.floor(l)
print fn
'''
dataset = gdal.Open(fn, GA_ReadOnly)
if dataset == None:
msg="\nProblem cannot open " + fn + "\n"
FreeCAD.Console.PrintError(msg)
errorDialog(msg)
return
cols=dataset.RasterXSize
rows=dataset.RasterYSize
geotransform = dataset.GetGeoTransform()
originX = geotransform[0]
originY = geotransform[3]
pixelWidth = geotransform[1]
pixelHeight = geotransform[5]
band = dataset.GetRasterBand(1)
data = band.ReadAsArray(0, 0, cols, rows)
#data.shape -> 3601 x 3601 secs
# erfurt 51,11
#data[0,0]
# zeitz 51,12
#data[3600,0]
# windischletten(zapfendorf) 50,11
#data[0,3600]
# troestau fichtelgebirge 50,12
#data[3600,3600]
px=int(round((bs+1-b)*3600))
py=int(round((l-ls)*3600))
pts=[]
d=70
print "----------------------------",d
d1=20
d2=50
d1=d
d2=d
tm=TransverseMercator()
tm.lat=b
tm.lon=l
center=tm.fromGeographic(tm.lat,tm.lon)
z0= data[px,py] # relative height to origin px,py
for x in range(px-d1,px+d1):
for y in range(py-d2,py+d2):
ll=tm.fromGeographic(bs+1-1.0/3600*x,ls+1.0/3600*y)
pt=FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1], 1000.0* (data[x,y]-z0))
pts.append(pt)
# display the point cloud
p=Points.Points(pts)
Points.show(p)
return pts
def runfile(fn, xw, xe, ys, yn, ox=0, oy=0):
f = 100000000
tm = TransverseMercator()
tm.lat = 0.5 * (yn + ys)
tm.lon = 0.5 * (xw + xe)
center = tm.fromGeographic(tm.lat, tm.lon)
xw *= f
xe *= f
ys *= f
yn *= f
ox *= f
oy *= f
pts = []
poss = {}
nds = []
elev = -1
c = 0
#Gui.ActiveDocument.ActiveView.setAnimationEnabled(False)
pb = createProgressBar(label="create Elevations " + os.path.basename(fn))
# file = open('/home/microelly2/Downloads/Lat50Lon11Lat51Lon12.osm', 'r')
file = open(fn)
# pb.pb.setValue(10)
for line in file.readlines():
c += 1
# if c == 100000: break
pb.pb.setValue((c / 100) % 100)
# print("!", line)
#if c % 10 == 0:
# Gui.updateGui()
# Gui.SendMsgToActiveView("ViewFit")
m = re.match(r'.*<node id="([^"]+)" lat="([^"]+)" lon="([^"]+)".*',
line)
if m:
y = float(m.group(2)) * f
x = float(m.group(3)) * f
id = m.group(1)
poss[id] = (x, y)
continue
m = re.match(r'.*<nd ref="([^"]+)".*', line)
if m:
nds.append(m.group(1))
continue
m = re.match(r'.*<tag k="ele" v="([^"]+)".*', line)
if m:
elev = float(m.group(1))
continue
m = re.match(r'.*/way.*', line)
if m:
print("erzeuge pfad")
for nd in nds:
x = poss[nd][0]
y = poss[nd][1]
if xw < x and x < xe and ys < y and y < yn:
ll = tm.fromGeographic(y / f, x / f)
pts.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1],
elev * 1000))
# if len(pts)>2:
# d=Draft.makeWire(pts)
# if len(pts)==1:
# d=Draft.makePoint(pts[0])
c += 1
print(c, elev, len(pts))
poss = {}
elev = 0
nds = []
continue
pb.hide()
return pts
def import_osm2(b,l,bk,progressbar,status,elevation):
dialog=False
debug=False
if progressbar:
progressbar.setValue(0)
if status:
status.setText("get data from openstreetmap.org ...")
FreeCADGui.updateGui()
content=''
bk=0.5*bk
dn=FreeCAD.ConfigGet("UserAppData") + "/geodat/"
fn=dn+str(b)+'-'+str(l)+'-'+str(bk)
import os
if not os.path.isdir(dn):
print "create " + dn
os.makedirs(dn)
try:
f=open(fn,"r")
content=f.read()
# print content
except:
lk=bk #
b1=b-bk/1113*10
l1=l-lk/713*10
b2=b+bk/1113*10
l2=l+lk/713*10
source='http://api.openstreetmap.org/api/0.6/map?bbox='+str(l1)+','+str(b1)+','+str(l2)+','+str(b2)
print source
try:
response = urllib2.urlopen(source)
first=True
content=''
f=open(fn,"w")
l=0
z=0
ct=0
for line in response:
if status:
if z>5000:
status.setText("read data ..." + str(l))
z=0
FreeCADGui.updateGui()
l+=1
z+=1
if first:
first=False
else:
content += line
f.write(line)
f.close()
if status:
status.setText("FILE CLOSED ..." + str(l))
FreeCADGui.updateGui()
response.close()
except:
print "Fehler beim Lesen"
if status:
status.setText("got data from openstreetmap.org ...")
FreeCADGui.updateGui()
print "Beeenden - im zweiten versuch daten auswerten"
return
if elevation:
baseheight=getheight(b,l)
else:
baseheight=0
print "-------Data---------"
print content
print "--------------------"
if status:
status.setText("parse data ...")
FreeCADGui.updateGui()
sd=parse(content)
if debug: print(json.dumps(sd, indent=4))
if status:
status.setText("transform data ...")
FreeCADGui.updateGui()
bounds=sd['osm']['bounds']
nodes=sd['osm']['node']
ways=sd['osm']['way']
relations=sd['osm']['relation']
# center of the scene
bounds=sd['osm']['bounds']
minlat=float(bounds['@minlat'])
minlon=float(bounds['@minlon'])
maxlat=float(bounds['@maxlat'])
maxlon=float(bounds['@maxlon'])
tm=TransverseMercator()
tm.lat=0.5*(minlat+maxlat)
tm.lon=0.5*(minlon+maxlon)
center=tm.fromGeographic(tm.lat,tm.lon)
corner=tm.fromGeographic(minlat,minlon)
size=[center[0]-corner[0],center[1]-corner[1]]
# map all points to xy-plane
points={}
nodesbyid={}
for n in nodes:
nodesbyid[n['@id']]=n
ll=tm.fromGeographic(float(n['@lat']),float(n['@lon']))
points[str(n['@id'])]=FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],0.0)
# hack to catch deutsche umlaute
def beaustring(string):
res=''
for tk in zz:
try:
res += str(tk)
except:
if ord(tk)==223:
res += 'ß'
elif ord(tk)==246:
res += 'ö'
elif ord(tk)==196:
res += 'Ä'
elif ord(tk)==228:
res += 'ä'
elif ord(tk)==242:
res += 'ü'
else:
print ["error sign",tk,ord(tk),string]
res +="#"
return res
if status:
status.setText("create visualizations ...")
FreeCADGui.updateGui()
App.newDocument("OSM Map")
say("Datei erzeugt")
area=App.ActiveDocument.addObject("Part::Plane","area")
obj = FreeCAD.ActiveDocument.ActiveObject
say("grundflaeche erzeugt")
try:
viewprovider = obj.ViewObject
root=viewprovider.RootNode
myLight = coin.SoDirectionalLight()
myLight.color.setValue(coin.SbColor(0,1,0))
root.insertChild(myLight, 0)
say("beleuchtung auf grundobjekt eingeschaltet")
except:
sayexc("Beleuchtung 272")
cam='''#Inventor V2.1 ascii
OrthographicCamera {
viewportMapping ADJUST_CAMERA
orientation 0 0 -1.0001 0.001
nearDistance 0
farDistance 10000000000
aspectRatio 100
focalDistance 1
'''
x=0
y=0
height=1000000
height=200*bk*10000/0.6
cam += '\nposition ' +str(x) + ' ' + str(y) + ' 999\n '
cam += '\nheight ' + str(height) + '\n}\n\n'
FreeCADGui.activeDocument().activeView().setCamera(cam)
FreeCADGui.activeDocument().activeView().viewAxonometric()
say("Kamera gesetzt")
area.Length=size[0]*2
area.Width=size[1]*2
area.Placement=FreeCAD.Placement(FreeCAD.Vector(-size[0],-size[1],0.00),FreeCAD.Rotation(0.00,0.00,0.00,1.00))
say("Area skaliert")
wn=-1
coways=len(ways)
starttime=time.time()
refresh=1000
for w in ways:
# print w
wid=w['@id']
# print wid
building=False
landuse=False
highway=False
wn += 1
# nur teile testen
#if wn <2000: continue
nowtime=time.time()
if wn<>0: print "way ---- # " + str(wn) + "/" + str(coways) + " time per house: " + str(round((nowtime-starttime)/wn,2))
if progressbar:
progressbar.setValue(int(0+100.0*wn/coways))
if debug: print "w=", w
if debug: print "tags ..."
st=""
nr=""
h=0
try:
w['tag']
except:
print "no tags found."
continue
for t in w['tag']:
if t.__class__.__name__ == 'OrderedDict':
try:
if debug: print t
if str(t['@k'])=='building':
building=True
st='building'
if str(t['@k'])=='landuse':
landuse=True
st=w['tag']['@k']
nr=w['tag']['@v']
if str(t['@k'])=='highway':
highway=True
st=t['@k']
if str(t['@k'])=='name':
zz=t['@v']
nr=beaustring(zz)
if str(t['@k'])=='ref':
zz=t['@v']
nr=beaustring(zz)+" /"
if str(t['@k'])=='addr:street':
zz=w['tag'][1]['@v']
st=beaustring(zz)
if str(t['@k'])=='addr:housenumber':
nr=str(t['@v'])
if str(t['@k'])=='building:levels':
if h==0:
h=int(str(t['@v']))*1000*3
if str(t['@k'])=='building:height':
h=int(str(t['@v']))*1000
except:
print "unexpected error ################################################################"
else:
if debug: print [w['tag']['@k'],w['tag']['@v']]
if str(w['tag']['@k'])=='building':
building=True
st='building'
if str(w['tag']['@k'])=='building:levels':
if h==0:
h=int(str(w['tag']['@v']))*1000*3
if str(w['tag']['@k'])=='building:height':
h=int(str(w['tag']['@v']))*1000
if str(w['tag']['@k'])=='landuse':
landuse=True
st=w['tag']['@k']
nr=w['tag']['@v']
if str(w['tag']['@k'])=='highway':
highway=True
st=w['tag']['@k']
nr=w['tag']['@v']
name=str(st) + " " + str(nr)
if name==' ':
name='landuse xyz'
if debug: print "name ",name
#generate pointlist of the way
polis=[]
height=None
llpoints=[]
for n in w['nd']:
m=nodesbyid[n['@ref']]
llpoints.append([n['@ref'],m['@lat'],m['@lon']])
if elevation:
heights=get_heights(llpoints)
for n in w['nd']:
p=points[str(n['@ref'])]
if building and elevation:
if not height:
try:
height=heights[m['@lat']+' '+m['@lon']]*1000 - baseheight
except:
print "---no height avaiable for " + m['@lat']+' '+m['@lon']
height=0
p.z=height
polis.append(p)
#create 2D map
pp=Part.makePolygon(polis)
Part.show(pp)
z=App.ActiveDocument.ActiveObject
z.Label="w_"+wid
if name==' ':
g=App.ActiveDocument.addObject("Part::Extrusion",name)
g.Base = z
g.ViewObject.ShapeColor = (1.00,1.00,0.00)
g.Dir = (0,0,10)
g.Solid=True
g.Label='way ex '
if building:
g=App.ActiveDocument.addObject("Part::Extrusion",name)
g.Base = z
g.ViewObject.ShapeColor = (1.00,1.00,1.00)
if h==0:
h=10000
g.Dir = (0,0,h)
g.Solid=True
g.Label=name
obj = FreeCAD.ActiveDocument.ActiveObject
inventortools.setcolors2(obj)
if landuse:
g=App.ActiveDocument.addObject("Part::Extrusion",name)
g.Base = z
if nr == 'residential':
g.ViewObject.ShapeColor = (1.00,.60,.60)
elif nr == 'meadow':
g.ViewObject.ShapeColor = (0.00,1.00,0.00)
elif nr == 'farmland':
g.ViewObject.ShapeColor = (.80,.80,.00)
elif nr == 'forest':
g.ViewObject.ShapeColor = (1.0,.40,.40)
g.Dir = (0,0,0.1)
g.Label=name
g.Solid=True
if highway:
g=App.ActiveDocument.addObject("Part::Extrusion","highway")
g.Base = z
g.ViewObject.LineColor = (0.00,.00,1.00)
g.ViewObject.LineWidth = 10
g.Dir = (0,0,0.2)
g.Label=name
refresh += 1
if os.path.exists("/tmp/stop"):
print("notbremse gezogen")
FreeCAD.w=w
raise Exception("Notbremse Manager main loop")
if refresh >3:
FreeCADGui.updateGui()
# FreeCADGui.SendMsgToActiveView("ViewFit")
refresh=0
FreeCAD.activeDocument().recompute()
FreeCADGui.updateGui()
FreeCAD.activeDocument().recompute()
if status:
status.setText("import finished.")
if progressbar:
progressbar.setValue(100)
organize()
endtime=time.time()
print "running time ", int(endtime-starttime), " count ways ", coways
def import_osm2(b,l,bk,progressbar,status,elevation):
dialog=False
debug=False
if progressbar:
progressbar.setValue(0)
if status:
status.setText("get data from openstreetmap.org ...")
FreeCADGui.updateGui()
content=''
bk=0.5*bk
dn=FreeCAD.ConfigGet("UserAppData") + "/geodat/"
fn=dn+str(b)+'-'+str(l)+'-'+str(bk)
import os
if not os.path.isdir(dn):
print "create " + dn
os.makedirs(dn)
try:
print "I try to read data from cache file ..."
print fn
f=open(fn,"r")
content=f.read()
print "successful read"
# print content
except:
print "no cache file, so I connect to openstreetmap.org..."
lk=bk #
b1=b-bk/1113*10
l1=l-lk/713*10
b2=b+bk/1113*10
l2=l+lk/713*10
source='http://api.openstreetmap.org/api/0.6/map?bbox='+str(l1)+','+str(b1)+','+str(l2)+','+str(b2)
print source
try:
response = urllib2.urlopen(source)
first=True
content=''
f=open(fn,"w")
l=0
z=0
ct=0
for line in response:
if status:
if z>5000:
status.setText("read data ..." + str(l))
z=0
FreeCADGui.updateGui()
l+=1
z+=1
if first:
first=False
else:
content += line
f.write(line)
f.close()
if status:
status.setText("FILE CLOSED ..." + str(l))
FreeCADGui.updateGui()
response.close()
except:
print "Fehler beim Lesen"
if status:
status.setText("got data from openstreetmap.org ...")
FreeCADGui.updateGui()
print "Beeenden - im zweiten versuch daten auswerten"
return False
if elevation:
baseheight=getHeight(b,l)
else:
baseheight=0
if debug:
print "-------Data---------"
print content
print "--------------------"
if status:
status.setText("parse data ...")
FreeCADGui.updateGui()
try:
sd=parse(content)
except:
sayexc("Problem parsing data - abort")
status.setText("Problem parsing data - aborted, for details see Report view")
return
if debug: print(json.dumps(sd, indent=4))
if status:
status.setText("transform data ...")
FreeCADGui.updateGui()
bounds=sd['osm']['bounds']
nodes=sd['osm']['node']
ways=sd['osm']['way']
try:
relations=sd['osm']['relation']
except:
relations=[]
# center of the scene
bounds=sd['osm']['bounds']
minlat=float(bounds['@minlat'])
minlon=float(bounds['@minlon'])
maxlat=float(bounds['@maxlat'])
maxlon=float(bounds['@maxlon'])
tm=TransverseMercator()
tm.lat=0.5*(minlat+maxlat)
tm.lon=0.5*(minlon+maxlon)
center=tm.fromGeographic(tm.lat,tm.lon)
corner=tm.fromGeographic(minlat,minlon)
size=[center[0]-corner[0],center[1]-corner[1]]
# map all points to xy-plane
points={}
nodesbyid={}
for n in nodes:
nodesbyid[n['@id']]=n
ll=tm.fromGeographic(float(n['@lat']),float(n['@lon']))
points[str(n['@id'])]=FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],0.0)
# hack to catch deutsche umlaute
def beaustring(string):
res=''
for tk in zz:
try:
res += str(tk)
except:
if ord(tk)==223:
res += 'ß'
elif ord(tk)==246:
res += 'ö'
elif ord(tk)==196:
res += 'Ä'
elif ord(tk)==228:
res += 'ä'
elif ord(tk)==242:
res += 'ü'
else:
print ["error sign",tk,ord(tk),string]
res +="#"
return res
if status:
status.setText("create visualizations ...")
FreeCADGui.updateGui()
App.newDocument("OSM Map")
say("Datei erzeugt")
area=App.ActiveDocument.addObject("Part::Plane","area")
obj = FreeCAD.ActiveDocument.ActiveObject
say("grundflaeche erzeugt")
try:
viewprovider = obj.ViewObject
root=viewprovider.RootNode
myLight = coin.SoDirectionalLight()
myLight.color.setValue(coin.SbColor(0,1,0))
root.insertChild(myLight, 0)
say("beleuchtung auf grundobjekt eingeschaltet")
except:
sayexc("Beleuchtung 272")
cam='''#Inventor V2.1 ascii
OrthographicCamera {
viewportMapping ADJUST_CAMERA
orientation 0 0 -1.0001 0.001
nearDistance 0
farDistance 10000000000
aspectRatio 100
focalDistance 1
'''
x=0
y=0
height=1000000
height=200*bk*10000/0.6
cam += '\nposition ' +str(x) + ' ' + str(y) + ' 999\n '
cam += '\nheight ' + str(height) + '\n}\n\n'
FreeCADGui.activeDocument().activeView().setCamera(cam)
FreeCADGui.activeDocument().activeView().viewAxonometric()
say("Kamera gesetzt")
area.Length=size[0]*2
area.Width=size[1]*2
area.Placement=FreeCAD.Placement(FreeCAD.Vector(-size[0],-size[1],0.00),FreeCAD.Rotation(0.00,0.00,0.00,1.00))
say("Area skaliert")
wn=-1
coways=len(ways)
starttime=time.time()
refresh=1000
for w in ways:
# print w
wid=w['@id']
# print wid
building=False
landuse=False
highway=False
wn += 1
# nur teile testen
#if wn <2000: continue
nowtime=time.time()
if wn<>0 and (nowtime-starttime)/wn > 0.5: print "way ---- # " + str(wn) + "/" + str(coways) + " time per house: " + str(round((nowtime-starttime)/wn,2))
if progressbar:
progressbar.setValue(int(0+100.0*wn/coways))
if debug: print "w=", w
if debug: print "tags ..."
st=""
nr=""
h=0
try:
w['tag']
except:
print "no tags found."
continue
for t in w['tag']:
if t.__class__.__name__ == 'OrderedDict':
try:
if debug: print t
if str(t['@k'])=='building':
building=True
st='building'
if str(t['@k'])=='landuse':
landuse=True
st=w['tag']['@k']
nr=w['tag']['@v']
if str(t['@k'])=='highway':
highway=True
st=t['@k']
if str(t['@k'])=='name':
zz=t['@v']
nr=beaustring(zz)
if str(t['@k'])=='ref':
zz=t['@v']
nr=beaustring(zz)+" /"
if str(t['@k'])=='addr:street':
zz=w['tag'][1]['@v']
st=beaustring(zz)
if str(t['@k'])=='addr:housenumber':
nr=str(t['@v'])
if str(t['@k'])=='building:levels':
if h==0:
h=int(str(t['@v']))*1000*3
if str(t['@k'])=='building:height':
h=int(str(t['@v']))*1000
except:
print "unexpected error ################################################################"
else:
if debug: print [w['tag']['@k'],w['tag']['@v']]
if str(w['tag']['@k'])=='building':
building=True
st='building'
if str(w['tag']['@k'])=='building:levels':
if h==0:
h=int(str(w['tag']['@v']))*1000*3
if str(w['tag']['@k'])=='building:height':
h=int(str(w['tag']['@v']))*1000
if str(w['tag']['@k'])=='landuse':
landuse=True
st=w['tag']['@k']
nr=w['tag']['@v']
if str(w['tag']['@k'])=='highway':
highway=True
st=w['tag']['@k']
nr=w['tag']['@v']
name=str(st) + " " + str(nr)
if name==' ':
name='landuse xyz'
if debug: print "name ",name
#generate pointlist of the way
polis=[]
height=None
llpoints=[]
for n in w['nd']:
m=nodesbyid[n['@ref']]
llpoints.append([n['@ref'],m['@lat'],m['@lon']])
if elevation:
print "get heights for " + str(len(llpoints))
heights=getHeights(llpoints)
for n in w['nd']:
p=points[str(n['@ref'])]
if building and elevation:
if not height:
try:
height=heights[m['@lat']+' '+m['@lon']]*1000 - baseheight
except:
print "---no height avaiable for " + m['@lat']+' '+m['@lon']
height=0
p.z=height
polis.append(p)
#create 2D map
pp=Part.makePolygon(polis)
Part.show(pp)
z=App.ActiveDocument.ActiveObject
z.Label="w_"+wid
if name==' ':
g=App.ActiveDocument.addObject("Part::Extrusion",name)
g.Base = z
g.ViewObject.ShapeColor = (1.00,1.00,0.00)
g.Dir = (0,0,10)
g.Solid=True
g.Label='way ex '
if building:
g=App.ActiveDocument.addObject("Part::Extrusion",name)
g.Base = z
g.ViewObject.ShapeColor = (1.00,1.00,1.00)
if h==0:
h=10000
g.Dir = (0,0,h)
g.Solid=True
g.Label=name
obj = FreeCAD.ActiveDocument.ActiveObject
inventortools.setcolors2(obj)
if landuse:
g=App.ActiveDocument.addObject("Part::Extrusion",name)
g.Base = z
if nr == 'residential':
g.ViewObject.ShapeColor = (1.00,.60,.60)
elif nr == 'meadow':
g.ViewObject.ShapeColor = (0.00,1.00,0.00)
elif nr == 'farmland':
g.ViewObject.ShapeColor = (.80,.80,.00)
elif nr == 'forest':
g.ViewObject.ShapeColor = (1.0,.40,.40)
g.Dir = (0,0,0.1)
g.Label=name
g.Solid=True
if highway:
g=App.ActiveDocument.addObject("Part::Extrusion","highway")
g.Base = z
g.ViewObject.LineColor = (0.00,.00,1.00)
g.ViewObject.LineWidth = 10
g.Dir = (0,0,0.2)
g.Label=name
refresh += 1
if os.path.exists("/tmp/stop"):
print("notbremse gezogen")
FreeCAD.w=w
raise Exception("Notbremse Manager main loop")
if refresh >3:
FreeCADGui.updateGui()
# FreeCADGui.SendMsgToActiveView("ViewFit")
refresh=0
FreeCAD.activeDocument().recompute()
FreeCADGui.updateGui()
FreeCAD.activeDocument().recompute()
if status:
status.setText("import finished.")
if progressbar:
progressbar.setValue(100)
organize()
endtime=time.time()
print "running time ", int(endtime-starttime), " count ways ", coways
return True
def runfile(fn, xw,xe,ys,yn,ox=0,oy=0):
f= 100000000
tm=TransverseMercator()
tm.lat=0.5*(yn+ys)
tm.lon=0.5*(xw+xe)
center=tm.fromGeographic(tm.lat,tm.lon)
xw *= f
xe *= f
ys *= f
yn *= f
ox *= f
oy *= f
pts=[]
poss={}
nds=[]
elev=-1
c=0
#Gui.ActiveDocument.ActiveView.setAnimationEnabled(False)
pb=createProgressBar(label="create Elevations " + os.path.basename(fn) )
# file = open('/home/microelly2/Downloads/Lat50Lon11Lat51Lon12.osm', 'r')
file =open(fn)
# pb.pb.setValue(10)
for line in file.readlines():
c += 1
# if c == 100000: break
pb.pb.setValue((c/100)%100)
# print "!", line
#if c % 10 == 0:
# Gui.updateGui()
# Gui.SendMsgToActiveView("ViewFit")
m = re.match(r'.*<node id="([^"]+)" lat="([^"]+)" lon="([^"]+)".*', line)
if m:
y=float(m.group(2))*f
x=float(m.group(3))*f
id=m.group(1)
poss[id]=(x,y)
continue
m = re.match(r'.*<nd ref="([^"]+)".*', line)
if m:
nds.append(m.group(1))
continue
m = re.match(r'.*<tag k="ele" v="([^"]+)".*', line)
if m:
elev=float(m.group(1))
continue
m = re.match(r'.*/way.*', line)
if m:
print "erzeuge pfad"
for nd in nds:
x=poss[nd][0]
y=poss[nd][1]
if xw<x and x<xe and ys<y and y<yn:
ll=tm.fromGeographic(y/f,x/f)
pts.append(FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],elev*1000))
# if len(pts)>2:
# d=Draft.makeWire(pts)
# if len(pts)==1:
# d=Draft.makePoint(pts[0])
c +=1
print (c,elev, len(pts))
poss={}
elev=0
nds=[]
continue
pb.hide()
return pts
def import_osm2(b, l, bk, progressbar, status, elevation):
dialog = False
if progressbar:
progressbar.setValue(0)
if status:
status.setText("get data from openstreetmap.org ...")
FreeCADGui.updateGui()
content = ''
bk = 0.5*bk
dn = FreeCAD.ConfigGet("UserAppData") + "geodat3/"
fn = dn+str(b)+'-'+str(l)+'-'+str(bk)
import os
if not os.path.isdir(dn):
os.makedirs(dn)
try:
say("I try to read data from cache file ... ")
say(fn)
f = open(fn, "r")
content = f.read()
except:
sayW("no cache file, so I connect to openstreetmap.org...")
lk = bk
b1 = b-bk/1113*10
l1 = l-lk/713*10
b2 = b+bk/1113*10
l2 = l+lk/713*10
source = 'http://api.openstreetmap.org/api/0.6/map?bbox='+str(l1)+','+str(b1)+','+str(l2)+','+str(b2)
say(source)
import requests
response = requests.get(source)
data = response.text
lines = response.text.split('\n')
FreeCAD.t = response
f = open(fn, "w")
# f.write(response.text)
if response.status_code == 200:
with open(fn, 'wb') as f:
for chunk in response.iter_content(1024):
f.write(chunk)
f.close()
if elevation:
baseheight = getHeight(b, l)
else:
baseheight = 0
if debug:
say("-------Data---------")
say(content)
if status:
status.setText("parse data ...")
FreeCADGui.updateGui()
say("------------------------------")
say(fn)
say(fn)
tree = my_xmlparser.getData(fn)
if debug:
say(json.dumps(sd, indent=4))
if status:
status.setText("transform data ...")
FreeCADGui.updateGui()
relations = tree.getiterator('relation')
nodes = tree.getiterator('node')
ways = tree.getiterator('way')
bounds = tree.getiterator('bounds')[0]
# center of the scene
minlat = float(bounds.params['minlat'])
minlon = float(bounds.params['minlon'])
maxlat = float(bounds.params['maxlat'])
maxlon = float(bounds.params['maxlon'])
tm = TransverseMercator()
tm.lat = 0.5*(minlat+maxlat)
tm.lon = 0.5*(minlon+maxlon)
center = tm.fromGeographic(tm.lat, tm.lon)
corner = tm.fromGeographic(minlat, minlon)
size = [center[0]-corner[0], center[1]-corner[1]]
# map all points to xy-plane
points = {}
nodesbyid = {}
for n in nodes:
nodesbyid[n.params['id']] = n
ll = tm.fromGeographic(float(n.params['lat']), float(n.params['lon']))
points[str(n.params['id'])] = FreeCAD.Vector(ll[0]-center[0], ll[1]-center[1], 0.0)
if status:
status.setText("create visualizations ...")
FreeCADGui.updateGui()
App.newDocument("OSM Map")
say("Datei erzeugt")
area = App.ActiveDocument.addObject("Part::Plane", "area")
obj = FreeCAD.ActiveDocument.ActiveObject
say("grundflaeche erzeugt")
try:
viewprovider = obj.ViewObject
root = viewprovider.RootNode
myLight = coin.SoDirectionalLight()
myLight.color.setValue(coin.SbColor(0, 1, 0))
root.insertChild(myLight, 0)
say("beleuchtung auf grundobjekt eingeschaltet")
except:
sayexc("Beleuchtung 272")
cam = '''#Inventor V2.1 ascii
OrthographicCamera {
viewportMapping ADJUST_CAMERA
orientation 0 0 -1.0001 0.001
nearDistance 0
farDistance 10000000000
aspectRatio 100
focalDistance 1
'''
x = 0
y = 0
height = 200*bk*10000/0.6
cam += '\nposition ' + str(x) + ' ' + str(y) + ' 999\n '
cam += '\nheight ' + str(height) + '\n}\n\n'
FreeCADGui.activeDocument().activeView().setCamera(cam)
FreeCADGui.activeDocument().activeView().viewAxonometric()
say("Kamera gesetzt")
area.Length = size[0]*2
area.Width = size[1]*2
area.Placement = FreeCAD.Placement(FreeCAD.Vector(-size[0], -size[1], 0.00), FreeCAD.Rotation(0.00, 0.00, 0.00, 1.00))
say("Area skaliert")
wn = -1
coways = len(ways)
starttime = time.time()
refresh = 1000
for w in ways:
wid = w.params['id']
building = False
landuse = False
highway = False
wn += 1
nowtime = time.time()
if wn != 0 and (nowtime-starttime)/wn > 0.5:
say(("way ---- # " + str(wn) + "/" + str(coways) + " time per house: " + str(round((nowtime-starttime)/wn, 2))))
if progressbar:
progressbar.setValue(int(0+100.0*wn/coways))
st = ""
st2 = ""
nr = ""
h = 0
ci = ""
for t in w.getiterator('tag'):
try:
if str(t.params['k']) == 'building':
building = True
if st == '':
st = 'building'
if str(t.params['k']) == 'landuse':
landuse = True
st = t.params['k']
nr = t.params['v']
if str(t.params['k']) == 'highway':
highway = True
st = t.params['k']
if str(t.params['k']) == 'addr:city':
ci = t.params['v']
if str(t.params['k']) == 'name':
nr = t.params['v']
if str(t.params['k']) == 'ref':
nr = t.params['v']+" /"
if str(t.params['k']) == 'addr:street':
st2 = " "+t.params['v']
if str(t.params['k']) == 'addr:housenumber':
nr = str(t.params['v'])
if str(t.params['k']) == 'building:levels':
if h == 0:
h = int(str(t.params['v']))*1000*3
if str(t.params['k']) == 'building:height':
h = int(str(t.params['v']))*1000
except:
sayErr("unexpected error ######################################################")
name = str(st) + st2 + " " + str(nr)
if name == ' ':
name = 'landuse xyz'
if debug:
say(("name ", name))
# Generate pointlist of the way
polis = []
height = None
llpoints = []
for n in w.getiterator('nd'):
m = nodesbyid[n.params['ref']]
llpoints.append([n.params['ref'], m.params['lat'], m.params['lon']])
if elevation:
say("get heights for " + str(len(llpoints)))
heights = getHeights(llpoints)
for n in w.getiterator('nd'):
p = points[str(n.params['ref'])]
if building and elevation:
if not height:
try:
height = heights[m.params['lat']+' '+m.params['lon']]*1000 - baseheight
except:
sayErr("---no height avaiable for " + m.params['lat']+' '+m.params['lon'])
height = 0
p.z = height
polis.append(p)
# Create 2D map
pp = Part.makePolygon(polis)
Part.show(pp)
z = App.ActiveDocument.ActiveObject
z.Label = "w_"+wid
if name == ' ':
g = App.ActiveDocument.addObject("Part::Extrusion", name)
g.Base = z
g.ViewObject.ShapeColor = (1.00, 1.00, 0.00)
g.Dir = (0, 0, 10)
g.Solid = True
g.Label = 'way ex '
if building:
g = App.ActiveDocument.addObject("Part::Extrusion", name)
g.Base = z
g.ViewObject.ShapeColor = (1.00, 1.00, 1.00)
if h == 0:
h = 10000
g.Dir = (0, 0, h)
g.Solid = True
g.Label = name
obj = FreeCAD.ActiveDocument.ActiveObject
inventortools.setcolors2(obj)
if landuse:
g = App.ActiveDocument.addObject("Part::Extrusion", name)
g.Base = z
if nr == 'residential':
g.ViewObject.ShapeColor = (1.00, 0.60, 0.60)
elif nr == 'meadow':
g.ViewObject.ShapeColor = (0.00, 1.00, 0.00)
elif nr == 'farmland':
g.ViewObject.ShapeColor = (0.80, 0.80, 0.00)
elif nr == 'forest':
g.ViewObject.ShapeColor = (1.0, 0.40, 0.40)
g.Dir = (0, 0, 0.1)
g.Label = name
g.Solid = True
if highway:
g = App.ActiveDocument.addObject("Part::Extrusion", "highway")
g.Base = z
g.ViewObject.LineColor = (0.00, 0.00, 1.00)
g.ViewObject.LineWidth = 10
g.Dir = (0, 0, 0.2)
g.Label = name
refresh += 1
if os.path.exists("/tmp/stop"):
sayErr("notbremse gezogen")
FreeCAD.w = w
raise Exception("Notbremse Manager main loop")
if refresh > 3:
FreeCADGui.updateGui()
refresh = 0
FreeCADGui.updateGui()
FreeCAD.activeDocument().recompute()
if status:
status.setText("import finished.")
if progressbar:
progressbar.setValue(100)
organize()
endtime = time.time()
say(("running time ", int(endtime-starttime), " count ways ", coways))
return True
def getAST(b=50.26, l=11.39):
bs = np.floor(b)
ls = np.floor(l)
# the ast dataset
ff = "N%02dE%03d" % (int(bs), int(ls))
fn = FreeCAD.ConfigGet("UserAppData") + "/geodat/AST/ASTGTM2_" + ff + "_dem.tif"
# print fn
"""
fn='/home/microelly2/FCB/b217_heightmaps/tandemx_daten/Chile-Chuquicatmata.tif'
b=-22.3054705
l=-68.9259643
bs=np.floor(b)
ls=np.floor(l)
print fn
"""
dataset = gdal.Open(fn, GA_ReadOnly)
if dataset == None:
msg = "\nProblem cannot open " + fn + "\n"
FreeCAD.Console.PrintError(msg)
errorDialog(msg)
return
cols = dataset.RasterXSize
rows = dataset.RasterYSize
geotransform = dataset.GetGeoTransform()
originX = geotransform[0]
originY = geotransform[3]
pixelWidth = geotransform[1]
pixelHeight = geotransform[5]
band = dataset.GetRasterBand(1)
data = band.ReadAsArray(0, 0, cols, rows)
# data.shape -> 3601 x 3601 secs
# erfurt 51,11
# data[0,0]
# zeitz 51,12
# data[3600,0]
# windischletten(zapfendorf) 50,11
# data[0,3600]
# troestau fichtelgebirge 50,12
# data[3600,3600]
px = int(round((bs + 1 - b) * 3600))
py = int(round((l - ls) * 3600))
pts = []
d = 50
tm = TransverseMercator()
tm.lat = b
tm.lon = l
center = tm.fromGeographic(tm.lat, tm.lon)
z0 = data[px, py] # relative height to origin px,py
for x in range(px - d, px + d):
for y in range(py - d, py + d):
ll = tm.fromGeographic(bs + 1 - 1.0 / 3600 * x, ls + 1.0 / 3600 * y)
pt = FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1], 1000.0 * (data[x, y] - z0))
pts.append(pt)
# display the point cloud
p = Points.Points(pts)
Points.show(p)
return pts
def import_osm2(b, l, bk, progressbar, status, elevation):
dialog = False
debug = False
if progressbar:
progressbar.setValue(0)
if status:
status.setText("get data from openstreetmap.org ...")
FreeCADGui.updateGui()
content = ''
bk = 0.5 * bk
dn = FreeCAD.ConfigGet("UserAppData") + "/geodat3/"
fn = dn + str(b) + '-' + str(l) + '-' + str(bk)
import os
if not os.path.isdir(dn):
os.makedirs(dn)
try:
say("I try to read data from cache file ... ")
say(fn)
f = open(fn, "r")
content = f.read()
# say(content)
# raise Exception("to debug:force load from internet")
except:
sayW("no cache file, so I connect to openstreetmap.org...")
lk = bk #
b1 = b - bk / 1113 * 10
l1 = l - lk / 713 * 10
b2 = b + bk / 1113 * 10
l2 = l + lk / 713 * 10
source = 'http://api.openstreetmap.org/api/0.6/map?bbox=' + str(
l1) + ',' + str(b1) + ',' + str(l2) + ',' + str(b2)
say(source)
import requests
response = requests.get(source)
data = response.text
lines = response.text.split('\n')
FreeCAD.t = response
f = open(fn, "w")
# f.write(response.text)
if response.status_code == 200:
with open(fn, 'wb') as f:
for chunk in response.iter_content(1024):
f.write(chunk)
f.close()
# print("huhu");return
if 0:
try:
say("read--")
response = urllib.request.urlopen(source)
#import ssl
#ssl._create_default_https_context = ssl._create_unverified_context
#response = urllib.request.urlopen(source)
# import requests
# response = requests.get(source)
say(response)
say("2huu")
first = True
content = ''
f = open(fn, "w")
l = 0
z = 0
ct = 0
say("2wkkw")
#say(response.text)
# lines=response.text.split('\n')
# say(len(lines))
say("ll")
# for line in lines:
for line in response:
print("Y", line)
if status:
if z > 5000:
status.setText("read data ..." + str(l))
z = 0
FreeCADGui.updateGui()
l += 1
z += 1
if first:
first = False
else:
content += line
f.write(line)
f.close()
if status:
status.setText("FILE CLOSED ..." + str(l))
FreeCADGui.updateGui()
response.close()
except:
sayErr("Fehler beim Lesen")
if status:
status.setText("got data from openstreetmap.org ...")
FreeCADGui.updateGui()
sayW("Beeenden - im zweiten versuch daten auswerten")
return False
if elevation:
baseheight = getHeight(b, l)
else:
baseheight = 0
if debug:
say("-------Data---------")
say(content)
if status:
status.setText("parse data ...")
FreeCADGui.updateGui()
say("------------------------------")
say(fn)
# fn='/home/thomas/.FreeCAD//geodat3/50.340722-11.232647-0.015'
say(fn)
tree = geodat.my_xmlparser.getData(fn)
# for element in tree.getiterator('node'):
# say(element.params)
# say("ways")
# for element in tree.getiterator('way'):
# say(element.params)
# say("relations")
# for element in tree.getiterator('relation'):
# say(element.params)
if 0:
try:
sd = parse(content)
except:
sayexc("Problem parsing data - abort")
status.setText(
"Problem parsing data - aborted, for details see Report view")
return
if debug: say(json.dumps(sd, indent=4))
if status:
status.setText("transform data ...")
FreeCADGui.updateGui()
relations = tree.getiterator('relation')
nodes = tree.getiterator('node')
ways = tree.getiterator('way')
bounds = tree.getiterator('bounds')[0]
# center of the scene
minlat = float(bounds.params['minlat'])
minlon = float(bounds.params['minlon'])
maxlat = float(bounds.params['maxlat'])
maxlon = float(bounds.params['maxlon'])
tm = TransverseMercator()
tm.lat = 0.5 * (minlat + maxlat)
tm.lon = 0.5 * (minlon + maxlon)
center = tm.fromGeographic(tm.lat, tm.lon)
corner = tm.fromGeographic(minlat, minlon)
size = [center[0] - corner[0], center[1] - corner[1]]
# map all points to xy-plane
points = {}
nodesbyid = {}
for n in nodes:
nodesbyid[n.params['id']] = n
ll = tm.fromGeographic(float(n.params['lat']), float(n.params['lon']))
points[str(n.params['id'])] = FreeCAD.Vector(ll[0] - center[0],
ll[1] - center[1], 0.0)
# say(points)
# say("abbruch3 -hier daten uebernehmen !!");return
# hack to catch deutsche umlaute
def beaustring(string):
res = ''
for tk in zz:
try:
res += str(tk)
except:
if ord(tk) == 223:
res += 'ß'
elif ord(tk) == 246:
res += 'ö'
elif ord(tk) == 196:
res += 'Ä'
elif ord(tk) == 228:
res += 'ä'
elif ord(tk) == 242:
res += 'ü'
else:
sayErr(["error sign", tk, ord(tk), string])
res += "#"
return res
if status:
status.setText("create visualizations ...")
FreeCADGui.updateGui()
App.newDocument("OSM Map")
say("Datei erzeugt")
area = App.ActiveDocument.addObject("Part::Plane", "area")
obj = FreeCAD.ActiveDocument.ActiveObject
say("grundflaeche erzeugt")
try:
viewprovider = obj.ViewObject
root = viewprovider.RootNode
myLight = coin.SoDirectionalLight()
myLight.color.setValue(coin.SbColor(0, 1, 0))
root.insertChild(myLight, 0)
say("beleuchtung auf grundobjekt eingeschaltet")
except:
sayexc("Beleuchtung 272")
cam = '''#Inventor V2.1 ascii
OrthographicCamera {
viewportMapping ADJUST_CAMERA
orientation 0 0 -1.0001 0.001
nearDistance 0
farDistance 10000000000
aspectRatio 100
focalDistance 1
'''
x = 0
y = 0
height = 1000000
height = 200 * bk * 10000 / 0.6
cam += '\nposition ' + str(x) + ' ' + str(y) + ' 999\n '
cam += '\nheight ' + str(height) + '\n}\n\n'
FreeCADGui.activeDocument().activeView().setCamera(cam)
FreeCADGui.activeDocument().activeView().viewAxonometric()
say("Kamera gesetzt")
area.Length = size[0] * 2
area.Width = size[1] * 2
area.Placement = FreeCAD.Placement(
FreeCAD.Vector(-size[0], -size[1], 0.00),
FreeCAD.Rotation(0.00, 0.00, 0.00, 1.00))
say("Area skaliert")
wn = -1
coways = len(ways)
starttime = time.time()
refresh = 1000
for w in ways:
wid = w.params['id']
# say(w.params)
# say("way content")
# for c in w.content:
# say(c)
building = False
landuse = False
highway = False
wn += 1
# nur teile testen
#if wn <2000: continue
nowtime = time.time()
if wn != 0 and (nowtime - starttime) / wn > 0.5:
say(("way ---- # " + str(wn) + "/" + str(coways) +
" time per house: " + str(round(
(nowtime - starttime) / wn, 2))))
if progressbar:
progressbar.setValue(int(0 + 100.0 * wn / coways))
st = ""
st2 = ""
nr = ""
h = 0
ci = ""
for t in w.getiterator('tag'):
try:
if debug: say(t)
# say(t.params['k'])
# say(t.params['v'])
if str(t.params['k']) == 'building':
building = True
if st == '':
st = 'building'
if str(t.params['k']) == 'landuse':
landuse = True
st = t.params['k']
nr = t.params['v']
if str(t.params['k']) == 'highway':
highway = True
st = t.params['k']
if str(t.params['k']) == 'addr:city':
ci = t.params['v']
if str(t.params['k']) == 'name':
zz = t.params['v']
nr = beaustring(zz)
if str(t.params['k']) == 'ref':
zz = t.params['v']
nr = beaustring(zz) + " /"
if str(t.params['k']) == 'addr:street':
zz = t.params['v']
st2 = " " + beaustring(zz)
if str(t.params['k']) == 'addr:housenumber':
nr = str(t.params['v'])
if str(t.params['k']) == 'building:levels':
if h == 0:
h = int(str(t.params['v'])) * 1000 * 3
if str(t.params['k']) == 'building:height':
h = int(str(t.params['v'])) * 1000
except:
sayErr(
"unexpected error ######################################################"
)
name = str(st) + " " + str(nr)
name = str(st) + st2 + " " + str(nr)
if name == ' ':
name = 'landuse xyz'
if debug: say(("name ", name))
#say(name,zz,nr,ci)
#generate pointlist of the way
polis = []
height = None
llpoints = []
# say("get nodes",w)
for n in w.getiterator('nd'):
# say(n.params)
m = nodesbyid[n.params['ref']]
llpoints.append(
[n.params['ref'], m.params['lat'], m.params['lon']])
if elevation:
say("get heights for " + str(len(llpoints)))
heights = getHeights(llpoints)
for n in w.getiterator('nd'):
p = points[str(n.params['ref'])]
if building and elevation:
if not height:
try:
height = heights[m.params['lat'] + ' ' +
m.params['lon']] * 1000 - baseheight
except:
sayErr("---no height avaiable for " + m.params['lat'] +
' ' + m.params['lon'])
height = 0
p.z = height
polis.append(p)
#create 2D map
pp = Part.makePolygon(polis)
Part.show(pp)
z = App.ActiveDocument.ActiveObject
z.Label = "w_" + wid
if name == ' ':
g = App.ActiveDocument.addObject("Part::Extrusion", name)
g.Base = z
g.ViewObject.ShapeColor = (1.00, 1.00, 0.00)
g.Dir = (0, 0, 10)
g.Solid = True
g.Label = 'way ex '
if building:
g = App.ActiveDocument.addObject("Part::Extrusion", name)
g.Base = z
g.ViewObject.ShapeColor = (1.00, 1.00, 1.00)
if h == 0:
h = 10000
g.Dir = (0, 0, h)
g.Solid = True
g.Label = name
obj = FreeCAD.ActiveDocument.ActiveObject
inventortools.setcolors2(obj)
if landuse:
g = App.ActiveDocument.addObject("Part::Extrusion", name)
g.Base = z
if nr == 'residential':
g.ViewObject.ShapeColor = (1.00, .60, .60)
elif nr == 'meadow':
g.ViewObject.ShapeColor = (0.00, 1.00, 0.00)
elif nr == 'farmland':
g.ViewObject.ShapeColor = (.80, .80, .00)
elif nr == 'forest':
g.ViewObject.ShapeColor = (1.0, .40, .40)
g.Dir = (0, 0, 0.1)
g.Label = name
g.Solid = True
if highway:
g = App.ActiveDocument.addObject("Part::Extrusion", "highway")
g.Base = z
g.ViewObject.LineColor = (0.00, .00, 1.00)
g.ViewObject.LineWidth = 10
g.Dir = (0, 0, 0.2)
g.Label = name
refresh += 1
if os.path.exists("/tmp/stop"):
sayErr("notbremse gezogen")
FreeCAD.w = w
raise Exception("Notbremse Manager main loop")
if refresh > 3:
FreeCADGui.updateGui()
# FreeCADGui.SendMsgToActiveView("ViewFit")
refresh = 0
FreeCAD.activeDocument().recompute()
FreeCADGui.updateGui()
FreeCAD.activeDocument().recompute()
if status:
status.setText("import finished.")
if progressbar:
progressbar.setValue(100)
organize()
endtime = time.time()
say(("running time ", int(endtime - starttime), " count ways ", coways))
return True
def import_gpx(filename, orig, hi):
'''import a gpx trackfile'''
global sd
f = open(filename, "r")
c1 = f.read()
content = re.sub('^\<\?[^\>]+\?\>', '', c1)
print(content)
tm = TransverseMercator()
# outdoor inn ...
tm.lat, tm.lon = 50.3736049, 11.191643
if orig != 'auto':
yy = orig.split(',')
origin = (float(yy[0]), float(yy[1]))
tm.lat = origin[0]
tm.lon = origin[1]
sd = parse(content)
if debug:
print(json.dumps(sd, indent=4))
points = []
points2 = []
points0 = []
px = []
py = []
pz = []
pt = []
startx = None
starty = None
starth = None
FreeCAD.sd = sd
seg = sd['gpx']['trk']['trkseg']
try:
seg['trkpt']
ss = seg
seg = [ss]
except:
pass
lats = []
lons = []
for s in seg:
trkpts = s['trkpt']
for n in trkpts:
lats.append(float(n['@lat']))
lons.append(float(n['@lon']))
print(min(lats), max(lats))
print(min(lons), max(lons))
print((max(lats) + min(lats)) / 2, (max(lons) + min(lons)) / 2)
print((max(lats) - min(lats)) / 2, (max(lons) - min(lons)) / 2)
if orig == 'auto':
tm.lat, tm.lon = (max(lats) + min(lats)) / 2, (max(lons) +
min(lons)) / 2
print("origin:")
print(tm.lat, tm.lon)
print("----------")
for s in seg:
trkpts = s['trkpt']
n = trkpts[0]
center = tm.fromGeographic(tm.lat, tm.lon)
# map all points to xy-plane
for n in trkpts:
lats.append(float(n['@lat']))
lons.append(float(n['@lon']))
ll = tm.fromGeographic(float(n['@lat']), float(n['@lon']))
h = n['ele']
tim = n['time']
t2 = re.sub('^.*T', '', tim)
t3 = re.sub('Z', '', t2)
t4 = t3.split(':')
timx = int(t4[0]) * 3600 + int(t4[1]) * 60 + int(t4[2])
pt.append(timx)
if starth == None:
starth = float(h)
starth = 0
points.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1],
1000 * (float(h) - starth)))
points.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1], 0))
points.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1],
1000 * (float(h) - starth)))
points2.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1],
1000 * (float(h) - starth) + 20000))
points0.append(
FreeCAD.Vector(ll[0] - center[0], ll[1] - center[1], 0))
px.append(ll[0] - center[0])
py.append(ll[1] - center[1])
pz.append(1000 * (float(h) - starth))
Draft.makeWire(points0)
Draft.makeWire(points)
po = App.ActiveDocument.ActiveObject
po.ViewObject.LineColor = (1.0, 0.0, 0.0)
po.MakeFace = False
po.Placement.Base.z = float(hi) * 1000
po.Label = "My Track"
Draft.makeWire(points2)
po2 = App.ActiveDocument.ActiveObject
po2.ViewObject.LineColor = (0.0, 0.0, 1.0)
po2.ViewObject.PointSize = 5
po2.ViewObject.PointColor = (0.0, 1.0, 1.0)
po2.Placement.Base.z = float(hi) * 1000
po2.Label = "Track + 20m"
App.activeDocument().recompute()
Gui.SendMsgToActiveView("ViewFit")
return str(tm.lat) + ',' + str(tm.lon)
def import_gpx(filename,orig,hi):
global sd
# content=trackstring
# fn='/home/microelly2/FCB/b202_gmx_tracks/im_haus.gpx'
# filename='/home/microelly2/FCB/b202_gmx_tracks/neufang.gpx'
f=open(filename,"r")
c1=f.read()
import re
content = re.sub('^\<\?[^\>]+\?\>', '', c1)
# print content
tm=TransverseMercator()
# outdoor inn ...
tm.lat,tm.lon = 50.3736049,11.191643
if orig<>'auto':
yy=orig.split(',')
origin=(float(yy[0]),float(yy[1]))
tm.lat=origin[0]
tm.lon=origin[1]
# center=tm.fromGeographic(tm.lat,tm.lon)
sd=parse(content)
if debug: print(json.dumps(sd, indent=4))
points=[]
points2=[]
points0=[]
px=[]
py=[]
pz=[]
pt=[]
startx=None
starty=None
starth=None
FreeCAD.sd=sd
seg=sd['gpx']['trk']['trkseg']
try:
seg['trkpt']
ss=seg
seg=[ss]
except:
pass
lats=[]
lons=[]
for s in seg:
trkpts=s['trkpt']
for n in trkpts:
lats.append(float(n['@lat']))
lons.append(float(n['@lon']))
print (min(lats),max(lats))
print (min(lons),max(lons))
print ((max(lats)+min(lats))/2,(max(lons)+min(lons))/2)
print ((max(lats)-min(lats))/2,(max(lons)-min(lons))/2)
if orig == 'auto':
tm.lat, tm.lon = (max(lats)+min(lats))/2,(max(lons)+min(lons))/2
print "origin:"
print(tm.lat,tm.lon)
print ("----------")
for s in seg:
trkpts=s['trkpt']
n=trkpts[0]
center=tm.fromGeographic(tm.lat,tm.lon)
# print trkpts
# for p in trkpts:
# print p
# map all points to xy-plane
for n in trkpts:
# print n['@lat'],n['@lon']
lats.append(float(n['@lat']))
lons.append(float(n['@lon']))
ll=tm.fromGeographic(float(n['@lat']),float(n['@lon']))
h=n['ele']
# print h
tim=n['time']
t2=re.sub('^.*T', '', tim)
t3=re.sub('Z', '', t2)
t4=t3.split(':')
timx=int(t4[0])*3600+int(t4[1])*60+int(t4[2])
pt.append(timx)
if starth == None:
starth=float(h)
starth=0
points.append(FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],1000*(float(h)-starth)))
points.append(FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],0))
points.append(FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],1000*(float(h)-starth)))
points2.append(FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],1000*(float(h)-starth)+20000))
points0.append(FreeCAD.Vector(ll[0]-center[0],ll[1]-center[1],0))
px.append(ll[0]-center[0])
py.append(ll[1]-center[1])
pz.append(1000*(float(h)-starth))
# print ll
if 1:
import Draft
if 0: #close path
points.append(points[0])
Draft.makeWire(points0)
Draft.makeWire(points)
po=App.ActiveDocument.ActiveObject
po.ViewObject.LineColor=(1.0,.0,0.0)
po.MakeFace = False
po.Placement.Base.z= float(hi) *1000
po.Label="My Track"
Draft.makeWire(points2)
po2=App.ActiveDocument.ActiveObject
po2.ViewObject.LineColor=(.0,.0,1.0)
po2.ViewObject.PointSize=5
po2.ViewObject.PointColor=(.0,1.0,1.0)
po2.Placement.Base.z= float(hi)*1000
po2.Label="Track + 20m"
App.activeDocument().recompute()
Gui.SendMsgToActiveView("ViewFit")
# break
#------------------------------------------------
# data for postprocessing
try:
import numpyNode
import mathplotlibNode
t=mathplotlibNode.createMPL()
t.Label="My Track raw Data"
# hier werte bereitstellen
t.countSources=4
t.source1Values=px
t.source2Values=py
t.source3Values=pz
t.source4Values=pt
t.source1Data="px"
t.source2Data="py"
t.source3Data="pz"
t.source4Data="pt"
t.useOut1=True
t.useOut2=True
t.useOut3=True
t.useOut4=True
# werte umrechnen
t2=numpyNode.createNP()
t2.Label="My Track data processed"
t2.sourceObject=t
t2.expression1="in1/np.max(np.abs(in1))"
t2.label1 = "x relative"
t2.expression2="in2/np.max(np.abs(in2))"
t2.label2 = "y relative"
t2.expression3="in3/np.max(np.abs(in3))"
t2.label3 = "z relative"
t2.expression4="-1+2*(in4-np.min(in4))/(np.max(in4)-np.min(in4))"
t2.label4 = "time relative"
# werte grafisch darstellen
t3=mathplotlibNode.createMPL()
t3.Label="My Track Data visualization"
t3.record=False
t3.useNumpy=True
t3.sourceNumpy=t2
t3.useOut1=True
t3.useOut2=True
t3.useOut3=True
t3.useOut4=True
t4=numpyNode.createNP()
t4.Label="My Track Data xy"
t4.sourceObject=t
t4.expression2="in2"
t4.label2 = "path xy"
t4.expressionTime="in1"
t5=mathplotlibNode.createMPL()
t5.Label="My Track Data xy Map"
t5.record=False
t5.useNumpy=True
t5.sourceNumpy=t4
t5.useOut2=True
FreeCAD.ActiveDocument.recompute()
except:
sayexc()
print "!",orig,"!"
return (str(tm.lat)+','+str(tm.lon))
return px,py
