Пример #1
0
    def connect(self):
        super(OutboundEventSocket, self).connect()
        # Starts event handler for this client/session.
        self.start_event_handler()

        # Sends connect and sets timeout while connecting.
        timer = Timeout(self.transport.get_connect_timeout())
        timer.start()
        try:
            connect_response = self._protocol_send("connect")
            if not connect_response.is_success():
                self.disconnect()
                raise ConnectError("Error while connecting")
        except Timeout:
            self.disconnect()
            raise ConnectError("Timeout connecting")
        finally:
            timer.cancel()

        # Sets channel and channel unique id from this event
        self._channel = connect_response
        self._uuid = connect_response.get_header("Unique-ID")

        # Set connected flag to True
        self.connected = True

        # Sets event filter or raises ConnectError
        if self._filter:
            if self._is_eventjson:
                filter_response = self.eventjson(self._filter)
            else:
                filter_response = self.eventplain(self._filter)
            if not filter_response.is_success():
                self.disconnect()
                raise ConnectError("Event filter failure")
Пример #2
0
    def connect(self):
        super(OutboundEventSocket, self).connect()
        # Starts event handler for this client/session.
        self.start_event_handler()

        # Sends connect and sets timeout while connecting.
        timer = Timeout(self.transport.get_connect_timeout())
        timer.start()
        try:
            connect_response = self._protocol_send("connect")
            if not connect_response.is_success():
                raise ConnectError("Error while connecting")
        except Timeout:
            raise ConnectError("Timeout connecting")
        finally:
            timer.cancel()

        # Sets channel and channel unique id from this event
        self._channel = connect_response
        self._uuid = connect_response.get_header("Unique-ID")

        # Set connected flag to True
        self.connected = True

        # Sets event filter or raises ConnectError
        if self._filter:
            if self._is_eventjson:
                self.trace("using eventjson")
                filter_response = self.eventjson(self._filter)
            else:
                self.trace("using eventplain")
                filter_response = self.eventplain(self._filter)
            if not filter_response.is_success():
                raise ConnectError("Event filter failure")
Пример #3
0
 def __call__(self, *args):
     timer = Timeout(self.timeout)
     timer.start()
     try:
         result = self.function(*args)
     finally:
         timer.cancel()
     return result
Пример #4
0
 def _get_instances(cluster):
     t = Timeout(RAPI_TIMEOUT)
     t.start()
     try:
         instances.extend(cluster.get_instances())
     except (GanetiApiError, Timeout):
         pass
     finally:
         t.cancel()
Пример #5
0
 def _get_instances(cluster):
     t = Timeout(RAPI_TIMEOUT)
     t.start()
     try:
         instances.extend(cluster.get_user_instances(request.user))
     except (GanetiApiError, Timeout):
         bad_clusters.append(cluster)
     finally:
         t.cancel()
Пример #6
0
 def _get_instances(cluster):
     t = Timeout(RAPI_TIMEOUT)
     t.start()
     try:
         instances.extend(cluster.get_instances())
     except (GanetiApiError, Timeout):
         pass
     finally:
         t.cancel()
Пример #7
0
 def _get_instances(cluster):
     t = Timeout(RAPI_TIMEOUT)
     t.start()
     try:
         instancesall.extend(cluster.get_user_instances(request.user))
     except (GanetiApiError, Timeout):
         bad_clusters.append(cluster)
     finally:
         t.cancel()
Пример #8
0
 def close(self):
     """
     Send a *bye* message to the :class:`AnnounceServer` and disconnect.
     """
     timeout = Timeout(1)
     timeout.start()
     try:
         self._announce.bye(self)
     except Timeout:
         pass
     finally:
         timeout.cancel()
     self._announce.close()
     self._mailbox.stop()
     [gevent.kill(g) for g in (self._greenlet, self._greenlet_ann_sub) if g]
Пример #9
0
 def _wait_auth_request(self):
     '''
     Waits until auth/request event is received.
     '''
     # Sets timeout to wait for auth/request
     timer = Timeout(self.transport.get_connect_timeout())
     timer.start()
     try:
         # When auth/request is received,
         # _auth_request method will wake up async result 
         # so we will just wait this event here.
         return self._wait_auth_event.get()
     except Timeout:
         raise ConnectError("Timeout waiting auth/request")
     finally:
         timer.cancel()
Пример #10
0
 def _wait_auth_request(self):
     '''
     Waits until auth/request event is received.
     '''
     # Sets timeout to wait for auth/request
     timer = Timeout(self.transport.get_connect_timeout())
     timer.start()
     try:
         # When auth/request is received,
         # _authRequest method in EventSocket will push this event to queue
         # so we will just wait this event here.
         return self._response_queue.get()
     except Timeout:
         raise ConnectError("Timeout waiting auth/request")
     finally:
         timer.cancel()
Пример #11
0
    def _run_queue_item(self, queue_item):
        temp_file = os.path.join(self.downloader._tmp_directory,
                                 queue_item.filename)

        try:
            self._logger.debug("begin download")

            timeout = Timeout(self.downloader.timeout)
            timeout.start()
            try:
                self._download_file(temp_file, queue_item)
            finally:
                timeout.cancel()

            self._unpack_file(temp_file, queue_item)

        except NotFound:
            self._handle_notfound(queue_item)

        except Timeout:
            self._handle_timeout(queue_item)

        except BadFile as e:
            abort = self._handle_badfile(queue_item)
            if abort:
                raise # thereby killing the whole download

        except (gevent.socket.error, ftplib.Error):
            self._handle_ioerror(queue_item)

        except (greenlet.GreenletExit, KeyboardInterrupt, SystemExit):
            raise

        else:
            self._server_sleep_backoff = 0
            # unfortunately gevent doesn't have JoinablePriorityQueues
            self.downloader._file_complete()

        finally:
            try:
                os.unlink(temp_file)
            except OSError as e:
                if e.errno != errno.ENOENT:
                    raise
Пример #12
0
    def _run_queue_item(self, queue_item):
        temp_file = os.path.join(self.downloader._tmp_directory,
                                 queue_item.filename)

        try:
            self._logger.debug("begin download")

            timeout = Timeout(self.downloader.timeout)
            timeout.start()
            try:
                self._download_file(temp_file, queue_item)
            finally:
                timeout.cancel()

            self._unpack_file(temp_file, queue_item)

        except NotFound:
            self._handle_notfound(queue_item)

        except Timeout:
            self._handle_timeout(queue_item)

        except BadFile as e:
            abort = self._handle_badfile(queue_item)
            if abort:
                raise  # thereby killing the whole download

        except (gevent.socket.error, ftplib.Error):
            self._handle_ioerror(queue_item)

        except (greenlet.GreenletExit, KeyboardInterrupt, SystemExit):
            raise

        else:
            self._server_sleep_backoff = 0
            # unfortunately gevent doesn't have JoinablePriorityQueues
            self.downloader._file_complete()

        finally:
            try:
                os.unlink(temp_file)
            except OSError as e:
                if e.errno != errno.ENOENT:
                    raise
 def test_down_nodes(self):
     results = []
     for node in self.shutdown_nodes:
         timeout = Timeout(self.shutdown_timeout)
         timeout.start()
         try:
             TestClient(node).put('test', self.get_value('test'))
             results.append(TextTestResult(self.get_node_name(node), 'Node still responding to requests.'))
         except:
             pass
         finally:
             timeout.cancel()
     if len(results) > 0:
         self.results.append(ClusteredTestResult(
             map(self.get_node_name, self.shutdown_nodes),
             results
         ))
     else:
         self.results.append(TextTestResult(
             'Check shutdown nodes',
             'All shutdown nodes not responding to requests.'
         ))
Пример #14
0
class SAPRouterServerHandler(Loggeable, SAPNIServerHandler):

    @property
    def hostname(self):
        return self.config.get("hostname", "sapnw702")

    @property
    def release(self):
        return self.config.get("release", 721)

    @property
    def router_version(self):
        return self.config.get("router_version", 40)

    @property
    def router_version_patch(self):
        return self.config.get("router_version_patch", 4)

    @property
    def info_password(self):
        return self.config.get("info_password", None)

    @property
    def external_admin(self):
        return self.config.get("external_admin", False)

    @property
    def timeout(self):
        return self.config.get("timeout", 5)

    @property
    def route_table_filename(self):
        return self.config.get("route_table_filename", "saprouttab")

    @property
    def route_table_working_directory(self):
        return self.config.get("route_table_working_directory", "/usr/sap/router")

    @property
    def time_started(self):
        return self.server.time_started

    @property
    def pid(self):
        return self.server.pid

    @property
    def parent_pid(self):
        return self.config.get("parent_pid", 0)

    @property
    def parent_port(self):
        return self.config.get("parent_pid", 0)

    def __init__(self, request, client_address, server):
        """Initialization"""
        self.config = server.config
        client_ip, client_port = client_address
        server_ip, server_port = server.server_address
        self.session = server.session_manager.get_session("saprouter",
                                                          client_ip,
                                                          client_port,
                                                          server_ip,
                                                          server_port)
        SAPNIServerHandler.__init__(self, request, client_address, server)

    def setup(self):
        """Add the client to the current client lists"""
        SAPNIServerHandler.setup(self)
        self.server.clients_count += 1
        self.server.clients[self.client_address].id = self.server.clients_count
        self.server.clients[self.client_address].address = self.client_address[0]
        self.server.clients[self.client_address].connected_on = datetime.today()

    def finish(self):
        """Closes the connection and deletes the client from the clients list"""
        self.close()
        SAPNIServerHandler.finish(self)

    def handle(self):
        """Handle data from the client. Treat timeouts inside the handle method"""

        # Set the timeout
        self._timeout = Timeout(self.timeout)
        self._timeout.start()

        # Try to handle the request
        try:
            while not self.closed.is_set():
                # Check if the current client was already routed to a target service
                if self.server.clients[self.client_address].routed:
                    # In that case we should treat the request as routed,
                    # and do not handle further packets from this client
                    self.handle_routed()
                    break

                else:
                    # Otherwise, we should expect for a route request within the timeout
                    # defined. Receive and store the packet
                    self.packet = self.request.recv()
                    # Pass the control to the handle_data function
                    self.handle_data()

        except Timeout as t:
            # If this is another timeout, raise it so another block can
            # catch it
            if t is not self._timeout:
                raise t
            self.handle_timeout()

        finally:
            self._timeout.cancel()

    def handle_data(self):
        """Handles a received packet"""
        self.session.add_event("Received packet", request=str(self.packet))

        if SAPRouter not in self.packet or not router_is_known_type(self.packet):
            self.logger.debug("Invalid packet sent to SAPRouter")

        router = self.packet[SAPRouter]
        if router_is_route(router):
            return self.handle_route(router)
        elif router_is_control(router):
            return self.handle_control(router)
        elif router_is_admin(router):
            return self.handle_admin(router)

    def handle_routed(self):
        """Handles a packet for an already routed client."""
        self.logger.debug("Handling routed message")

        # We create a new raw StreamSocket for passing it to the virtual
        # service. The SAP router service should take care of the NI layer
        # and perform the reassembling, keep alive, etc.
        stream_socket = StreamSocket(self.request.ins)

        # Now handle the virtual service, from now on the virtual service
        # would take care of this client
        self.server.clients[self.client_address].target_service.handle_virtual(stream_socket,
                                                                               self.client_address)

    def handle_route(self, pkt):
        """Handles route messages"""
        self.logger.debug("Handling route message")
        # Perform some checks on the route request
        if self.check_route(pkt):
            # Route the request
            self.route_request(pkt)

    def check_route(self, pkt):
        """Checks if a route request is valid.
        """

        # Check the route NI version
        if pkt.route_ni_version > self.router_version:
            self.logger.debug("Route request version greater")
            # TODO: Check if we need to return an error

        # Cehck the number of routes
        if len(pkt.route_string) <= 0:
            self.logger.debug("Invalid number of routes in route request")
            # TODO: Check if we need to return an error

        # Check the number of entries
        if pkt.route_entries < 2 and pkt.route_entries != len(pkt.route_string):
            self.logger.debug("Invalid number of entries in route request")
            # TODO: Check if we need to return an error

        # Check the number of remaining entries
        if pkt.route_rest_nodes >= pkt.route_entries:
            self.logger.debug("Invalid route rest nodes number")
            # TODO: Check if we need to return an error

        # Check the offset value against the length
        if pkt.route_offset >= pkt.route_length:
            self.logger.debug("Invalid route string offset")
            # TODO: Check if we need to return an error

        # Check the offset value against the remaining hops
        actual_offset = sum([len(x) for x in pkt.route_string[:pkt.route_rest_nodes]])
        if pkt.route_offset != actual_offset:
            self.logger.debug("Invalid route string offset")
            # TODO: Check if we need to return an error

        # Check that the first hop is the SAP Router
        first_hop = pkt.route_string[0]
        if first_hop.hostname != self.server.listener_address or \
           first_hop.port != self.server.listener_port:
            self.logger.debug("Invalid first hop in route string")
            # TODO: Check if we need to return an error

        return True

    def route_request(self, pkt):
        """Perform a lookup on the route table and routes the packet accordingly
        if allowed.
        """
        route_string = pkt.route_string[pkt.route_rest_nodes]
        (action, talk_mode, password) = self.server.route_table.lookup_target(route_string.hostname,
                                                                              int(route_string.port))

        if action == RouteTable.ROUTE_DENY:
            self.logger.debug("Route to %s:%s denied" % (route_string.hostname,
                                                         route_string.port))
            self.return_error(return_code=-94,
                              error="%s: route permission denied (%s to %s, %s)" % (self.hostname,
                                                                                    self.server.listener_address,
                                                                                    route_string.hostname,
                                                                                    route_string.port))
            return

        elif talk_mode != RouteTable.MODE_ANY and talk_mode != pkt.route_talk_mode:
            self.logger.debug("Talk mode (%d) to %s:%s denied" % (pkt.route_talk_mode,
                                                                  route_string.hostname,
                                                                  route_string.port))
            self.return_error(return_code=2)  # TODO: Return the proper error
            return

        elif action == RouteTable.ROUTE_ALLOW:
            if password:
                if password == route_string.password:
                    self.logger.debug("Valid password for route to %s:%s" % (route_string.hostname,
                                                                             route_string.port))
                    self.session.add_event("Route request allowed, valid password", data={"target_host": route_string.hostname,
                                                                                          "target_port": route_string.port,
                                                                                          "password": route_string.password},
                                           request=str(pkt))

                else:
                    self.logger.debug("Invalid password for route to %s:%s" % (route_string.hostname,
                                                                               route_string.port))
                    self.session.add_event("Route request allowed, invalid password", data={"target_host": route_string.hostname,
                                                                                            "target_port": route_string.port,
                                                                                            "password": route_string.password},
                                           request=str(pkt))
                    self.return_error(return_code=3)  # TODO: Return the proper error
                    return

            else:
                self.logger.debug("Route request allowed to %s:%s" % (route_string.hostname,
                                                                      route_string.port))
                self.session.add_event("Route request allowed", data={"target": route_string.hostname,
                                                                      "port": route_string.port,
                                                                      "password": route_string.password},
                                       request=str(pkt))

        # The route is accepted, now look the service for the target address/port
        # and register it as routed
        service = self.server.service_manager.find_service_by_address(route_string.hostname,
                                                                      int(route_string.port))

        # If the service wasn't found, we should return a timeout message,
        # meaning that the SAP Router tried to connect to the target service
        # but it didn't responded
        if service is None:
            self.logger.debug("Target service %s:%s not available" % (route_string.hostname,
                                                                      route_string.port))
            self.session.add_event("Target service not available", data={"target": route_string.hostname,
                                                                         "port": route_string.port,
                                                                         "password": route_string.password},
                                   request=str(pkt))

        else:
            self.logger.debug("Target service %s:%s found, registering and routing" % (route_string.hostname,
                                                                                       route_string.port))

            # First cancel the timeout as a valid route was specified
            self._timeout.cancel()

            # Register the current client as routed and set the target
            # address, port and service
            self.server.clients[self.client_address].routed = True
            self.server.clients[self.client_address].connected = True
            self.server.clients[self.client_address].target_service = service
            self.server.clients[self.client_address].talk_mode = pkt.route_talk_mode
            self.server.clients[self.client_address].partner = route_string.hostname
            self.server.clients[self.client_address].service = int(route_string.port)

            # Send a PONG message to notify the client the route was accepted
            self.request.send(SAPRouter(type=SAPRouter.SAPROUTER_PONG))

    def handle_control(self, pkt):
        """Handles control messages"""
        opcode_str = router_control_opcodes[pkt.opcode] if pkt.opcode in router_control_opcodes else "unknown"
        self.logger.debug("Handling control message, opcode %d (%s)",
                          pkt.opcode, opcode_str)
        # Version request
        if pkt.opcode == 1:
            self.logger.debug("Received version request (client version %d)", pkt.version)
            self.server.clients[self.client_address].ni_version = pkt.version
            self.request.send(SAPRouter(type=SAPRouter.SAPROUTER_CONTROL,
                                        version=self.router_version,
                                        opcode=2,
                                        return_code=-13))
        else:
            self.logger.debug("Unhandled opcode %d (%s)",
                              pkt.opcode, opcode_str)
            return self.return_error(return_code=-13,
                                     error="invalid client version",
                                     detail="NiBufIProcMsg: unknown opcode 3 received")

    def handle_admin(self, pkt):
        """Handles admin messages"""
        self.logger.debug("Handling admin message, command %d (%s)",
                          pkt.adm_command,
                          router_adm_commands[pkt.adm_command])

        if not self.external_admin:
            self.logger.debug("External administration disabled")
            return self.return_error(return_code=-94,
                                     error="Admin from remote denied")

        # Information request
        if pkt.adm_command == 2:
            self.logger.debug("Received information request (password %s)", pkt.adm_password)

            # If a password was specified but doesn't match, return error
            if self.info_password and self.info_password != pkt.adm_password.strip("\x00"):
                self.session.add_event("Information request invalid password", data=pkt.adm_password, request=str(self.packet))
                return self.return_error(return_code=-94,
                                         error="route denied")
            else:
                self.session.add_event("Information request valid password", data=pkt.adm_password, request=str(self.packet))
                return self.return_info()

        # Trace connection request
        if pkt.adm_command == 12:
            self.logger.debug("Received trace connection request (# clients: %s)", pkt.adm_client_count)

            for client_id in pkt.adm_client_ids:
                for client in self.server.clients:
                    if self.server.clients[client].id == client_id:
                        self.server.clients[client].traced = True
                return

        self.logger.debug("Unhandled command %d (%s)",
                          pkt.adm_command,
                          router_adm_commands[pkt.adm_command])

    def handle_timeout(self):
        """Handles timeout"""
        self.logger.debug("Timed out client")
        self.return_error(return_code=-5,
                          error="connection timed out",
                          detail="RTPENDLIST::timeoutPend: no route received within %ds (CONNECTED)" % self.timeout)

    def return_info(self):
        """Returns an information request response"""
        self.logger.debug("Returning information request")

        info_clients = []
        for client in list(self.server.clients.values()):
            info_client = SAPRouterInfoClient(id=client.id)
            info_client.address = client.address
            if client.routed:
                info_client.partner = client.partner
                info_client.service = client.service
            info_client.connected_on = unix_time(client.connected_on)

            info_client.flag_traced = client.traced
            info_client.flag_routed = client.routed
            info_client.flag_connected = client.connected

            info_clients.append(info_client)

        info_clients = "".join([str(client) for client in info_clients])
        info_pkt = Raw(info_clients)
        self.request.send(info_pkt)
        self.session.add_event("Returned information request", response=str(info_pkt))

        __, server_port = self.server.server_address

        info_pkt = SAPRouterInfoServer(pid=self.pid,
                                       ppid=self.parent_pid,
                                       started_on=unix_time(self.time_started),
                                       port=server_port,
                                       pport=self.parent_port)
        hexdump(info_pkt)
        self.request.send(info_pkt)
        self.session.add_event("Returned information request", data={"packet": "info_packet"},
                               response=str(info_pkt))

        info_pkt = Raw("Total no. of clients: %d\x00" % len(self.server.clients))
        self.request.send(info_pkt)
        self.session.add_event("Returned information request", data={"packet": "total_no_clients"},
                               response=str(info_pkt))

        info_pkt = Raw("Working directory   : %s\x00" % self.route_table_working_directory)
        self.request.send(info_pkt)
        self.session.add_event("Returned information request", data={"packet": "working_directory"},
                               response=str(info_pkt))

        info_pkt = Raw("Routtab             : %s\x00" % self.route_table_filename)
        self.request.send(info_pkt)
        self.session.add_event("Returned information request", data={"packet": "routtab"},
                               response=str(info_pkt))

        self.request.close()

    def return_error(self, **options):
        """Returns an error response"""
        self.logger.debug("Returning error code %d (%s)", options.get("return_code"),
                          router_return_codes[options.get("return_code")])

        error_text = SAPRouterError(release=str(self.release),
                                    version=str(self.router_version),
                                    error_time=datetime.now().strftime(SAPRouterError.time_format),
                                    location="SAPRouter %d.%d on '%s'" % (self.router_version,
                                                                          self.router_version_patch,
                                                                          self.hostname))
        for field in list(options.keys()):
            setattr(error_text, field, options[field])

        error_pkt = SAPRouter(type=SAPRouter.SAPROUTER_ERROR,
                              version=self.router_version,
                              opcode=0,
                              return_code=options.get("return_code"),
                              err_text_value=error_text)
        self.request.send(error_pkt)
        self.session.add_event("Returned error",
                               data={"return_code": options.get("return_code"),
                                     "error_msg": router_return_codes[options.get("return_code")]},
                               response=str(error_pkt))
Пример #15
0
filedesc:
@author: serg
"""
from gevent.hub import Waiter, get_hub
from gevent import core
import time
from gevent.timeout import Timeout
import gevent
from timeout import TimeoutException
from gevent import monkey
monkey.patch_all()


seconds  = 3
timeout = Timeout(3)
timeout.start()
# timeout = Timeout.start_new(seconds)
try:
    print 'sleep'
#     gevent.sleep(10)
    time.sleep(10)
    # exception will be raised here, after *seconds* passed since start() call
finally:
    timeout.cancel()



# Timeout(0.1).start()
# time.sleep(1)
# # gevent.sleep(0.2)
# print 'finish'