def tearDown(self):
# Calling GlusterBaseClass teardown
self.get_super_method(self, 'tearDown')()
# delete created snapshots
g.log.info("starting to delete all created snapshots")
ret, _, _ = snap_delete_all(self.mnode)
self.assertEqual(ret, 0, "Failed to delete all snapshots")
g.log.info("Successfully deleted all snapshots")
# Disable Activate on create
option = {'activate-on-create': 'disable'}
ret, _, _ = set_snap_config(self.mnode, option)
if ret != 0:
raise ExecutionError("Failed to set activateOnCreate"
"config option")
g.log.info("ActivateOnCreate config option Successfully set")
# umount clone volume
g.log.info("Unmounting clone volume")
ret, _, _ = umount_volume(self.clients[0], self.mpoint1)
if ret != 0:
raise ExecutionError("Failed to unmount clone "
"volume %s" % self.clone1)
g.log.info("Successfully unmounted clone volume %s", self.clone1)
ret, _, _ = umount_volume(self.clients[0], self.mpoint2)
if ret != 0:
raise ExecutionError("Failed to unmount clone "
"volume %s" % self.clone2)
g.log.info("Successfully unmounted clone volume %s", self.clone2)
# cleanup volume
g.log.info("starting to cleanup volume")
ret1 = cleanup_volume(self.mnode, self.clone1)
ret2 = cleanup_volume(self.mnode, self.clone2)
if not ret1:
raise ExecutionError("Failed to cleanup %s clone "
"volume" % self.clone1)
if not ret2:
raise ExecutionError("Failed to cleanup %s clone "
"volume" % self.clone2)
g.log.info("Successfully cleanedup cloned volumes")
# Unmount and cleanup-volume
g.log.info("Starting to Unmount and cleanup-volume")
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to Unmount and Cleanup Volume")
g.log.info("Successful in Unmount Volume and Cleanup Volume")
def tearDown(self):
ret = is_glusterd_running(self.servers)
if ret:
ret = start_glusterd(self.servers)
if not ret:
raise ExecutionError("Failed to start glusterd on %s" %
self.servers)
g.log.info("Glusterd started successfully on %s", self.servers)
# Checking for peer status from every node
for server in self.servers:
ret = wait_for_peers_to_connect(server, self.servers)
if not ret:
raise ExecutionError("Servers are not in peer probed state")
ret = cleanup_volume(self.mnode, self.volname_2)
if not ret:
raise ExecutionError("Unable to delete volume % s" %
self.volname_2)
# Unmount and cleanup original volume
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to umount the vol & cleanup Volume")
# Calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
def tearDownClass(cls, umount_vol=True, cleanup_vol=True):
"""Teardown the mounts and volume.
"""
GlusterBaseClass.tearDownClass.im_func(cls)
# Unmount volume
if umount_vol:
_rc = True
for mount_obj in cls.mounts:
ret = mount_obj.unmount()
if not ret:
g.log.error("Unable to unmount volume '%s:%s' on '%s:%s'",
mount_obj.server_system, mount_obj.volname,
mount_obj.client_system, mount_obj.mountpoint)
_rc = False
if not _rc:
raise ExecutionError("Unmount of all mounts are not "
"successful")
# Cleanup volume
if cleanup_vol:
ret = cleanup_volume(mnode=cls.mnode, volname=cls.volname)
if not ret:
raise ExecutionError("cleanup volume %s failed", cls.volname)
# All Volume Info
volume_info(cls.mnode)
def tearDown(self):
# UnMount Volume
g.log.info("Starting to Unmount Volume %s", self.volname)
ret = umount_volume(self.mounts[0].client_system,
self.mounts[0].mountpoint,
mtype=self.mount_type)
self.assertTrue(ret, ("Failed to Unmount Volume %s" % self.volname))
g.log.info("Successfully Unmounted Volume %s", self.volname)
# Clean up all volumes and peer probe to form cluster
vol_list = get_volume_list(self.mnode)
if vol_list is not None:
for volume in vol_list:
# check all bricks are online
ret = wait_for_bricks_to_be_online(self.mnode, volume)
if not ret:
raise ExecutionError("Failed to bring bricks online"
"for volume %s" % volume)
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Failed to cleanup volume")
g.log.info("Volume deleted successfully : %s", volume)
# Peer probe detached servers
pool = nodes_from_pool_list(self.mnode)
for node in pool:
peer_detach(self.mnode, node)
ret = peer_probe_servers(self.mnode, self.servers)
if not ret:
raise ExecutionError("Failed to probe peer "
"servers %s" % self.servers)
g.log.info("Peer probe success for detached "
"servers %s", self.servers)
self.get_super_method(self, 'tearDown')()
def tearDownClass(cls):
"""
Clean up the volume and umount volume from client
"""
# umount all volumes
for mount_obj in cls.mounts:
ret, _, _ = umount_volume(
mount_obj.client_system, mount_obj.mountpoint)
if ret:
raise ExecutionError(
"Failed to umount on volume %s "
% cls.volname)
g.log.info("Successfully umounted %s on client %s",
cls.volname, mount_obj.client_system)
ret = rmdir(mount_obj.client_system, mount_obj.mountpoint)
if not ret:
raise ExecutionError(
ret, "Failed to remove directory mount directory.")
g.log.info("Mount directory is removed successfully")
# stopping all volumes
g.log.info("Starting to Cleanup all Volumes")
volume_list = get_volume_list(cls.mnode)
for volume in volume_list:
ret = cleanup_volume(cls.mnode, volume)
if not ret:
raise ExecutionError("Failed to cleanup Volume %s" % volume)
g.log.info("Volume: %s cleanup is done", volume)
g.log.info("Successfully Cleanedup all Volumes")
# calling GlusterBaseClass tearDownClass
cls.get_super_method(cls, 'tearDownClass')()
def tearDown(self):
# Peer probe detached servers
pool = nodes_from_pool_list(self.mnode)
for node in pool:
peer_detach(self.mnode, node)
ret = peer_probe_servers(self.mnode, self.servers)
if not ret:
raise ExecutionError("Failed to probe detached "
"servers %s" % self.servers)
g.log.info("Peer probe success for detached "
"servers %s", self.servers)
# clean up all volumes and detaches peers from cluster
vol_list = get_volume_list(self.mnode)
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Failed to Cleanup the "
"Volume %s" % volume)
g.log.info("Volume deleted successfully : %s", volume)
# Calling GlusterBaseClass tearDown
GlusterBaseClass.tearDown.im_func(self)
def tearDown(self):
"""
tearDown for every test
"""
# clean up all volumes
vol_list = get_volume_list(self.mnode)
if vol_list is None:
raise ExecutionError("Failed to get the volume list")
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Unable to delete volume % s" % volume)
g.log.info("Volume deleted successfully : %s", volume)
# Cleaning the deleted volume bricks
for brick in self.brick_list:
node, brick_path = brick.split(r':')
cmd = "rm -rf " + brick_path
ret, _, _ = g.run(node, cmd)
if ret:
raise ExecutionError("Failed to delete the brick "
"dir's of deleted volume")
# Calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
def tearDown(self):
# Starting glusterd on node where stopped.
ret = start_glusterd(self.servers[self.random_server])
if ret:
ExecutionError("Failed to start glusterd.")
g.log.info("Successfully started glusterd.")
ret = wait_for_glusterd_to_start(self.servers)
if not ret:
ExecutionError("glusterd is not running on %s" % self.servers)
g.log.info("Glusterd start on the nodes succeeded")
# Checking if peer is connected.
ret = wait_for_peers_to_connect(self.mnode, self.servers)
if not ret:
ExecutionError("Peer is not in connected state.")
g.log.info("Peers is in connected state.")
# Stopping and deleting volume.
ret = cleanup_volume(self.mnode, self.volname)
if not ret:
raise ExecutionError("Unable to delete volume % s" % self.volname)
g.log.info("Volume deleted successfully : %s", self.volname)
self.get_super_method(self, 'tearDown')()
def tearDown(self):
# Unmounting the volume.
ret, _, _ = umount_volume(mclient=self.mounts[0].client_system,
mpoint=self.mounts[0].mountpoint)
if ret:
raise ExecutionError("Volume %s is not unmounted" % self.volname)
g.log.info("Volume unmounted successfully : %s", self.volname)
# clean up all volumes
vol_list = get_volume_list(self.mnode)
if not vol_list:
raise ExecutionError("Failed to get the volume list")
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Unable to delete volume % s" % volume)
g.log.info("Volume deleted successfully : %s", volume)
# Cleaning the deleted volume bricks
for brick in self.brick_list:
node, brick_path = brick.split(r':')
cmd = "rm -rf " + brick_path
ret, _, _ = g.run(node, cmd)
if ret:
raise ExecutionError("Failed to delete the brick "
"dir's of deleted volume")
self.get_super_method(self, 'tearDown')()
def tearDown(self):
# Starting glusterd on node where stopped.
ret = start_glusterd(self.servers[self.random_server])
if ret:
ExecutionError("Failed to start glusterd.")
g.log.info("Successfully started glusterd.")
# Checking if peer is connected.
counter = 0
while counter < 30:
ret = is_peer_connected(self.mnode, self.servers)
counter += 1
if ret:
break
sleep(3)
if not ret:
ExecutionError("Peer is not in connected state.")
g.log.info("Peers is in connected state.")
# Stopping and deleting volume.
ret = cleanup_volume(self.mnode, self.volname)
if not ret:
raise ExecutionError("Unable to delete volume % s" % self.volname)
g.log.info("Volume deleted successfully : %s", self.volname)
GlusterBaseClass.tearDown.im_func(self)
def tearDown(self):
# Cleanup and umount volume
g.log.info("Starting to Unmount Volume %s", self.volname)
ret = umount_volume(self.mounts[0].client_system,
self.mounts[0].mountpoint,
mtype=self.mount_type)
self.assertTrue(ret, ("Failed to Unmount Volume %s" % self.volname))
g.log.info("Successfully Unmounted Volume %s", self.volname)
# Clean up all volumes and peer probe to form cluster
vol_list = get_volume_list(self.mnode)
if vol_list is not None:
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Failed to cleanup volume")
g.log.info("Volume deleted successfully : %s", volume)
g.log.info("Successful in umounting the volume and Cleanup")
# Peer probe detached servers
pool = nodes_from_pool_list(self.mnode)
for node in pool:
peer_detach(self.mnode, node)
ret = peer_probe_servers(self.mnode, self.servers)
if not ret:
raise ExecutionError("Failed to probe detached "
"servers %s" % self.servers)
g.log.info("Peer probe success for detached "
"servers %s", self.servers)
GlusterBaseClass.tearDown.im_func(self)
def tearDown(self):
# Calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
# Disable USS on cloned volume
ret, _, _ = disable_uss(self.mnode, self.clone_vol1)
if ret:
raise ExecutionError("Failed to disable USS on cloned volume")
g.log.info("Successfully disabled USS on Cloned volume")
# Cleanup cloned volume
ret = unmount_mounts(self.mount1)
if not ret:
raise ExecutionError("Failed to unmount cloned volume")
ret = cleanup_volume(self.mnode, self.clone_vol1)
if not ret:
raise ExecutionError("Failed to unmount and cleanup cloned volume")
g.log.info("Successfully umounted and cleanup cloned volume")
# Unmount and cleanup-volume
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to Unmount and Cleanup Volume")
g.log.info("Successful in Unmount Volume and Cleanup Volume")
def tearDown(self):
vol_list = get_volume_list(self.mnode)
if vol_list is None:
raise ExecutionError("Failed to get volume list")
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Failed Cleanup the volume")
g.log.info("Volume deleted successfully %s", volume)
# Setting quorum ratio to 51%
ret = set_volume_options(self.mnode, 'all',
{'cluster.server-quorum-ratio': '51%'})
if not ret:
raise ExecutionError("Failed to set server quorum ratio on %s" %
self.volname)
# Peer probe servers since we are doing peer detach in setUpClass
for server in self.servers:
ret = is_peer_connected(server, self.servers)
if not ret:
ret = peer_probe_servers(server, self.servers)
if not ret:
raise ExecutionError(
"Peer probe failed to one of the node")
g.log.info("Peer probe successful")
self.get_super_method(self, 'tearDown')()
def tearDown(self):
# start glusterd on all servers
ret = start_glusterd(self.servers)
if not ret:
raise ExecutionError("Failed to start glusterd on all servers")
for server in self.servers:
ret = is_peer_connected(server, self.servers)
if not ret:
ret = peer_probe_servers(server, self.servers)
if not ret:
raise ExecutionError("Failed to peer probe all "
"the servers")
# clean up all volumes
vol_list = get_volume_list(self.mnode)
if vol_list is None:
raise ExecutionError("Failed to get the volume list")
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Unable to delete volume % s" % volume)
g.log.info("Volume deleted successfully : %s" % volume)
GlusterBaseClass.tearDown.im_func(self)
def tearDown(self):
# start the volume, it should succeed
ret, _, _ = volume_start(self.mnode, self.volname)
self.assertEqual(ret, 0, "Volume stop failed")
# start glusterd on all servers
ret = start_glusterd(self.servers)
if not ret:
raise ExecutionError("Failed to start glusterd on all servers")
for server in self.servers:
ret = wait_for_peers_to_connect(server, self.servers)
if not ret:
ret = peer_probe_servers(server, self.servers)
if not ret:
raise ExecutionError("Failed to peer probe all "
"the servers")
# clean up all volumes
vol_list = get_volume_list(self.mnode)
if vol_list is None:
raise ExecutionError("Failed to get the volume list")
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Unable to delete volume % s" % volume)
g.log.info("Volume deleted successfully : %s", volume)
self.get_super_method(self, 'tearDown')()
def tearDownClass(cls):
# stopping the volume and Cleaning up the volume
ret = cleanup_volume(cls.mnode, cls.volname)
if ret:
g.log.info("Volume deleted successfully : %s", cls.volname)
else:
raise ExecutionError("Failed Cleanup the Volume %s" % cls.volname)
def tearDownClass(cls):
"""
Clean up the volume and umount volume from client
"""
# stopping all volumes
g.log.info("Starting to Cleanup all Volumes")
volume_list = get_volume_list(cls.mnode)
for volume in volume_list:
ret = cleanup_volume(cls.mnode, volume)
if not ret:
raise ExecutionError("Failed to cleanup Volume %s" % volume)
g.log.info("Volume: %s cleanup is done", volume)
g.log.info("Successfully Cleanedup all Volumes")
# umount all volumes
for mount_point in cls.mount_points:
ret, _, _ = umount_volume(cls.client, mount_point)
if ret:
raise ExecutionError("Failed to umount on volume %s " %
cls.volname)
g.log.info("Successfully umounted %s on client %s", cls.volname,
cls.client)
# calling GlusterBaseClass tearDownClass
GlusterBaseClass.tearDownClass.im_func(cls)
def tearDown(self):
# Unmount Cloned volume
g.log.info("Starting to Unmount Cloned volume")
for count in range(0, 2):
self.mpoint = "/mnt/clone%s" % count
ret, _, _ = umount_volume(self.clients[0], self.mpoint,
self.mount_type)
if ret == 1:
raise ExecutionError("Unmounting the mount point %s failed" %
self.mpoint)
g.log.info("Mount point %s deleted successfully", self.mpoint)
g.log.info("Unmount Volume Successful")
# Cleanup Cloned Volumes
g.log.info("Starting to cleanup cloned volumes")
for clone_count in range(0, 2):
ret = cleanup_volume(self.mnode, "clone%s" % clone_count)
if not ret:
raise ExecutionError("Failed to cleanup clone%s volume" %
clone_count)
g.log.info("Successful in clone%s volume cleanup", clone_count)
# Unmount and cleanup-volume
g.log.info("Starting to Unmount and cleanup-volume")
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to Unmount and Cleanup Volume")
g.log.info("Cleanup Volume Successfully")
def tearDown(self):
# stopping the volume and Cleaning up the volume
self.get_super_method(self, 'tearDown')()
ret = is_glusterd_running(self.servers)
if ret:
ret = start_glusterd(self.servers)
if not ret:
raise ExecutionError("Failed to start glusterd on %s" %
self.servers)
# Takes 5 seconds to restart glusterd into peer connected state
sleep(5)
g.log.info("Glusterd started successfully on %s", self.servers)
# checking for peer status from every node
ret = is_peer_connected(self.mnode, self.servers)
if not ret:
ret = peer_probe_servers(self.mnode, self.servers)
if not ret:
raise ExecutionError("Failed to peer probe failed in "
"servers %s" % self.servers)
g.log.info("All peers are in connected state")
vol_list = get_volume_list(self.mnode)
if vol_list is None:
raise ExecutionError("Failed to get the volume list")
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Failed Cleanup the Volume")
g.log.info("Volume deleted successfully")
def tearDown(self):
# unmount the volume
ret = self.unmount_volume(self.mounts)
self.assertTrue(ret, "Volume unmount failed for %s" % self.volname)
# get volumes list and clean up all the volumes
vol_list = get_volume_list(self.mnode)
if vol_list is None:
raise ExecutionError("Error while getting vol list")
else:
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
if ret is True:
g.log.info("Volume deleted successfully : %s", volume)
else:
raise ExecutionError("Failed Cleanup the"
" Volume %s" % volume)
# peer probe all the servers
ret = peer_probe_servers(self.mnode, self.servers)
if not ret:
raise ExecutionError("Peer probe failed to all the servers from "
"the node.")
GlusterBaseClass.tearDown.im_func(self)
def tearDownClass(cls,
umount_vol=True,
cleanup_vol=True,
teardown_nfs_ganesha_cluster=True):
"""Teardown the export, mounts and volume.
"""
# Unmount volume
if umount_vol:
_rc = True
for mount_obj in cls.mounts:
ret = mount_obj.unmount()
if not ret:
g.log.error("Unable to unmount volume '%s:%s' on '%s:%s'",
mount_obj.server_system, mount_obj.volname,
mount_obj.client_system, mount_obj.mountpoint)
_rc = False
if not _rc:
raise ExecutionError("Unmount of all mounts are not "
"successful")
# Cleanup volume
if cleanup_vol:
volinfo = get_volume_info(cls.mnode, cls.volname)
if volinfo is None or cls.volname not in volinfo:
g.log.info("Volume %s does not exist in %s" %
(cls.volname, cls.mnode))
else:
# Unexport volume, if it is not unexported already
vol_option = get_volume_options(cls.mnode,
cls.volname,
option='ganesha.enable')
if vol_option is None:
raise ExecutionError("Failed to get ganesha.enable volume "
" option for %s " % cls.volume)
if vol_option['ganesha.enable'] != 'off':
if is_volume_exported(cls.mnode, cls.volname, "nfs"):
ret, out, err = unexport_nfs_ganesha_volume(
mnode=cls.mnode, volname=cls.volname)
if ret != 0:
raise ExecutionError(
"Failed to unexport volume %s" % cls.volname)
time.sleep(5)
else:
g.log.info("Volume %s is unexported already" % cls.volname)
_, _, _ = g.run(cls.mnode, "showmount -e")
ret = cleanup_volume(mnode=cls.mnode, volname=cls.volname)
if not ret:
raise ExecutionError("cleanup volume %s failed", cls.volname)
# All Volume Info
volume_info(cls.mnode)
(NfsGaneshaClusterSetupClass.tearDownClass.im_func(
cls, delete_nfs_ganesha_cluster=teardown_nfs_ganesha_cluster))
def tearDown(self):
"""
tearDown for every test
"""
if not self.glusterd_service:
ret = start_glusterd(self.servers[1])
if not ret:
raise ExecutionError("Failed to start glusterd services "
"for : %s" % self.servers[1])
# Checking glusterd service running or not
ret = is_glusterd_running(self.servers[1])
if ret == 0:
g.log.info("glusterd running on :%s", self.servers[1])
else:
raise ExecutionError("glusterd not running on :%s" %
self.servers[1])
# In this test case performing quorum operations,
# deleting volumes immediately after glusterd services start, volume
# deletions are failing with quorum not met,
# that's the reason verifying peers are connected or not before
# deleting volumes
peers_not_connected = True
count = 0
while count < 10:
ret = self.validate_peers_are_connected()
if ret:
peers_not_connected = False
break
count += 1
sleep(5)
if peers_not_connected:
raise ExecutionError("Servers are not in peer probed state")
# Reverting back the quorum ratio to 51%
self.quorum_perecent = {'cluster.server-quorum-ratio': '51%'}
ret = set_volume_options(self.mnode, 'all', self.quorum_perecent)
if not ret:
raise ExecutionError(
ret, "gluster volume set all cluster"
".server-quorum- ratio percentage Failed"
" :%s" % self.servers)
g.log.info(
"gluster volume set all cluster.server-quorum-ratio 51"
"percentage enabled successfully :%s", self.servers)
# stopping the volume and Cleaning up the volume
for volume in self.volume_list:
ret = cleanup_volume(self.mnode, volume)
if not ret:
raise ExecutionError("Failed to Cleanup the "
"Volume %s" % volume)
g.log.info("Volume deleted successfully : %s", volume)
# Calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
def tearDown(self):
# Calling GlusterBaseClass tearDown
GlusterBaseClass.tearDown.im_func(self)
# stopping the volume and Cleaning up the volume
ret = cleanup_volume(self.mnode, self.volname)
if not ret:
raise ExecutionError("Failed Cleanup the Volume")
g.log.info("Volume deleted successfully : %s", self.volname)
def tearDown(self):
# Stopping the volume and Cleaning up the volume
ret = cleanup_volume(self.mnode, self.volname)
if not ret:
raise ExecutionError("Failed to cleanup volume")
g.log.info("Volume deleted successfully : %s", self.volname)
# Calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
def tearDown(self):
# Calling GlusterBaseClass teardown
GlusterBaseClass.tearDown.im_func(self)
# Disable Activate on create
option = {'activate-on-create': 'disable'}
ret, _, _ = set_snap_config(self.mnode, option)
if ret != 0:
raise ExecutionError("Failed to set activateOnCreate"
"config option")
g.log.info("ActivateOnCreate config option Successfully set")
# umount clone volume
g.log.info("Unmounting clone volume")
ret, _, _ = umount_volume(self.mounts[0].client_system, self.mpoint1)
if ret != 0:
raise ExecutionError("Failed to unmount clone "
"volume %s" % self.clone1)
g.log.info("Successfully unmounted clone volume %s", self.clone1)
ret, _, _ = umount_volume(self.mounts[0].client_system, self.mpoint2)
if ret != 0:
raise ExecutionError("Failed to unmount clone "
"volume %s" % self.clone2)
g.log.info("Successfully unmounted clone volume %s", self.clone2)
# cleanup volume
g.log.info("starting to cleanup volume")
ret1 = cleanup_volume(self.mnode, self.clone1)
ret2 = cleanup_volume(self.mnode, self.clone2)
if not ret1:
raise ExecutionError("Failed to cleanup %s clone "
"volume" % self.clone1)
if not ret2:
raise ExecutionError("Failed to cleanup %s clone "
"volume" % self.clone2)
g.log.info("Successfully cleanedup cloned volumes")
# Unmount and cleanup-volume
g.log.info("Starting to Unmount and cleanup-volume")
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to Unmount and Cleanup Volume")
g.log.info("Successful in Unmount Volume and Cleanup Volume")
def tearDown(self):
"""
TearDown for Volume
Volume Cleanup
"""
ret = cleanup_volume(self.mnode, self.volname)
if not ret:
raise ExecutionError("Failed to Cleanup the "
"Volume %s" % self.volname)
g.log.info("Volume deleted successfully " ": %s", self.volname)
def tearDown(self):
'''
clean up all volumes and detaches peers from cluster
'''
vol_list = get_volume_list(self.mnode)
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
self.assertTrue(ret, "Failed to Cleanup the Volume %s" % volume)
g.log.info("Volume deleted successfully : %s" % volume)
GlusterBaseClass.tearDown.im_func(self)
def tearDown(self):
# Calling GlusterBaseClass teardown
self.get_super_method(self, 'tearDown')()
# Cleanup cloned volume
g.log.info("Starting to delete cloned volume")
ret = cleanup_volume(self.mnode, self.clone)
if not ret:
raise ExecutionError("Failed to delete the cloned volume")
g.log.info("Successful in deleting Cloned volume")
def tearDown(self):
'''
clean up all volumes and detaches peers from cluster
'''
vol_list = get_volume_list(self.mnode)
for volume in vol_list:
ret = cleanup_volume(self.mnode, volume)
self.assertTrue(ret, "Failed to Cleanup the Volume %s" % volume)
g.log.info("Volume deleted successfully : %s", volume)
self.get_super_method(self, 'tearDown')()
def tearDown(self):
# tearDown for every test
# Cleanup all successfully created volumes.
ret = cleanup_volume(self.mnode, self.volname)
if not ret:
raise ExecutionError("Failed to Cleanup the "
"Volume %s" % self.volname)
g.log.info("Volume deleted successfully " ": %s", self.volname)
# Calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()