def test_write_guideline(self):
line = classes.GSGuideLine()
# http://docu.glyphsapp.com/#GSGuideLine
line.position = point(56, 45)
line.angle = 11.0
line.name = "italic angle"
# selected: not written
self.assertWrites(line, dedent("""\
{
angle = 11;
name = "italic angle";
position = "{56, 45}";
}
"""))
def test_write_font_master_attributes(self):
"""Test the writer on all GSFontMaster attributes"""
master = classes.GSFontMaster()
# List of properties from https://docu.glyphsapp.com/#gsfontmaster
# id
master.id = "MASTER-ID"
# name
# Cannot set the `name` attribute directly
# master.name = "Hairline Megawide"
master.customParameters['Master Name'] = "Hairline Megawide"
# weight
master.weight = "Thin"
# width
master.width = "Wide"
# weightValue
master.weightValue = 0.01
# widthValue
master.widthValue = 0.99
# customValue
# customName
master.customName = "cuteness"
# A value of 0.0 is not written to the file.
master.customValue = 0.001
master.customName1 = "color"
master.customValue1 = 0.1
master.customName2 = "depth"
master.customValue2 = 0.2
master.customName3 = "surealism"
master.customValue3 = 0.3
# ascender
master.ascender = 234.5
# capHeight
master.capHeight = 200.6
# xHeight
master.xHeight = 59.1
# descender
master.descender = -89.2
# italicAngle
master.italicAngle = 12.2
# verticalStems
master.verticalStems = [1, 2, 3]
# horizontalStems
master.horizontalStems = [4, 5, 6]
# alignmentZones
zone = classes.GSAlignmentZone(0, -30)
master.alignmentZones = [
zone
]
# blueValues: not handled because it is read-only
# otherBlues: not handled because it is read-only
# guides
guide = classes.GSGuideLine()
guide.name = "middle"
master.guides.append(guide)
# userData
master.userData['rememberToMakeTea'] = True
# customParameters
master.customParameters['underlinePosition'] = -135
self.assertWrites(master, dedent("""\
{
alignmentZones = (
"{0, -30}"
);
ascender = 234.5;
capHeight = 200.6;
custom = cuteness;
customValue = 0.001;
custom1 = color;
customValue1 = 0.1;
custom2 = depth;
customValue2 = 0.2;
custom3 = surealism;
customValue3 = 0.3;
customParameters = (
{
name = "Master Name";
value = "Hairline Megawide";
},
{
name = underlinePosition;
value = -135;
}
);
descender = -89.2;
guideLines = (
{
name = middle;
}
);
horizontalStems = (
4,
5,
6
);
id = "MASTER-ID";
italicAngle = 12.2;
name = "Hairline Megawide";
userData = {
rememberToMakeTea = 1;
};
verticalStems = (
1,
2,
3
);
weight = Thin;
weightValue = 0.01;
width = Wide;
widthValue = 0.99;
xHeight = 59.1;
}
"""))
# Write the capHeight and xHeight even if they are "0"
master.xHeight = 0
master.capHeight = 0
written = test_helpers.write_to_lines(master)
self.assertIn("xHeight = 0;", written)
self.assertIn("capHeight = 0;", written)
def test_write_layer(self):
layer = classes.GSLayer()
# http://docu.glyphsapp.com/#gslayer
# parent: not written
# name
layer.name = '{125, 100}'
# associatedMasterId
layer.associatedMasterId = 'M1'
# layerId
layer.layerId = 'L1'
# color
layer.color = 2 # brown
# colorObject: read-only, computed
# components
component = classes.GSComponent(glyph='glyphName')
layer.components.append(component)
# guides
guide = classes.GSGuideLine()
guide.name = 'xheight'
layer.guides.append(guide)
# annotations
annotation = classes.GSAnnotation()
annotation.type = classes.TEXT
annotation.text = 'F**k, this curve is ugly!'
layer.annotations.append(annotation)
# hints
hint = classes.GSHint()
hint.name = 'hintName'
layer.hints.append(hint)
# anchors
anchor = classes.GSAnchor()
anchor.name = 'top'
layer.anchors['top'] = anchor
# paths
path = classes.GSPath()
layer.paths.append(path)
# selection: read-only
# LSB, RSB, TSB, BSB: not written
# width
layer.width = 890.4
# leftMetricsKey
layer.leftMetricsKey = "A"
# rightMetricsKey
layer.rightMetricsKey = "A"
# widthMetricsKey
layer.widthMetricsKey = "A"
# bounds: read-only, computed
# selectionBounds: read-only, computed
# background
# FIXME: (jany) why not use a GSLayer like the official doc suggests?
background_layer = classes.GSBackgroundLayer()
layer.background = background_layer
# backgroundImage
image = classes.GSBackgroundImage('/path/to/file.jpg')
layer.backgroundImage = image
# bezierPath: read-only, objective-c
# openBezierPath: read-only, objective-c
# completeOpenBezierPath: read-only, objective-c
# isAligned
# FIXME: (jany) is this read-only?
# is this computed from each component's alignment?
# layer.isAligned = False
# userData
layer.userData['rememberToMakeCoffe'] = True
# smartComponentPoleMapping
layer.smartComponentPoleMapping['crotchDepth'] = 2 # Top pole
layer.smartComponentPoleMapping['shoulderWidth'] = 1 # Bottom pole
self.assertWrites(layer, dedent("""\
{
anchors = (
{
name = top;
}
);
annotations = (
{
position = ;
text = "F**k, this curve is ugly!";
type = 1;
}
);
associatedMasterId = M1;
background = {
};
backgroundImage = {
crop = "{{0, 0}, {0, 0}}";
imagePath = "/path/to/file.jpg";
};
color = 2;
components = (
{
name = glyphName;
}
);
guideLines = (
{
name = xheight;
}
);
hints = (
{
name = hintName;
}
);
layerId = L1;
leftMetricsKey = A;
widthMetricsKey = A;
rightMetricsKey = A;
name = "{125, 100}";
paths = (
{
}
);
userData = {
PartSelection = {
crotchDepth = 2;
shoulderWidth = 1;
};
rememberToMakeCoffe = 1;
};
width = 890.4;
}
"""))
# Don't write a blank layer name
layer.name = ""
written = test_helpers.write_to_lines(layer)
self.assertNotIn('name = "";', written)
def test_write_layer(self):
layer = classes.GSLayer()
# http://docu.glyphsapp.com/#gslayer
# parent: not written
# name
layer.name = "{125, 100}"
# associatedMasterId
layer.associatedMasterId = "M1"
# layerId
layer.layerId = "L1"
# color
layer.color = (1, 2, 3, 4)
# colorObject: read-only, computed
# components
component = classes.GSComponent(glyph="glyphName")
layer.components.append(component)
# guides
guide = classes.GSGuideLine()
guide.name = "xheight"
layer.guides.append(guide)
# annotations
annotation = classes.GSAnnotation()
annotation.type = classes.TEXT
annotation.text = "F**k, this curve is ugly!"
layer.annotations.append(annotation)
# hints
hint = classes.GSHint()
hint.name = "hintName"
layer.hints.append(hint)
# anchors
anchor = classes.GSAnchor()
anchor.name = "top"
layer.anchors["top"] = anchor
# paths
path = classes.GSPath()
layer.paths.append(path)
# selection: read-only
# LSB, RSB, TSB, BSB: not written
# width
layer.width = 890.4
# leftMetricsKey
layer.leftMetricsKey = "A"
# rightMetricsKey
layer.rightMetricsKey = "A"
# widthMetricsKey
layer.widthMetricsKey = "A"
# bounds: read-only, computed
# selectionBounds: read-only, computed
# background
# XXX bg is unused?
bg = layer.background # noqa: F841
# backgroundImage
image = classes.GSBackgroundImage("/path/to/file.jpg")
layer.backgroundImage = image
# bezierPath: read-only, objective-c
# openBezierPath: read-only, objective-c
# completeOpenBezierPath: read-only, objective-c
# isAligned
# FIXME: (jany) is this read-only?
# is this computed from each component's alignment?
# layer.isAligned = False
# userData
layer.userData["rememberToMakeCoffe"] = True
# smartComponentPoleMapping
layer.smartComponentPoleMapping["crotchDepth"] = 2 # Top pole
layer.smartComponentPoleMapping["shoulderWidth"] = 1 # Bottom pole
self.assertWrites(
layer,
dedent("""\
{
anchors = (
{
name = top;
position = "{0, 0}";
}
);
annotations = (
{
text = "F**k, this curve is ugly!";
type = 1;
}
);
associatedMasterId = M1;
background = {
};
backgroundImage = {
crop = "{{0, 0}, {0, 0}}";
imagePath = "/path/to/file.jpg";
};
color = (1, 2, 3, 4);
components = (
{
name = glyphName;
}
);
guideLines = (
{
name = xheight;
}
);
hints = (
{
name = hintName;
}
);
layerId = L1;
leftMetricsKey = A;
widthMetricsKey = A;
rightMetricsKey = A;
name = "{125, 100}";
paths = (
{
closed = 1;
}
);
userData = {
PartSelection = {
crotchDepth = 2;
shoulderWidth = 1;
};
rememberToMakeCoffe = 1;
};
width = 890.4;
}
"""),
)
# Don't write a blank layer name
layer.name = ""
written = test_helpers.write_to_lines(layer)
self.assertNotIn('name = "";', written)
# Write the width even if 0
layer.width = 0
written = test_helpers.write_to_lines(layer)
self.assertIn("width = 0;", written)
