def driveSample(position):
log('Driving sample holder to position ' + str(position) + ' ...')
cur = sics.getValue('sampleNum').getFloatData()
if abs(cur - position) < 0.01:
log('sampleNum is already at ' + str(position))
return
sicsController = sics.getSicsController()
controller = sicsController.findComponentController(devices['sampleNum'])
# controller.drive(position)
cnt = 0
while cnt < 20:
try:
controller.drive(position)
break
except SicsExecutionException, e:
em = str(e.getMessage())
if em.__contains__('Interrupted'):
raise e
time.sleep(0.6)
log(str(e))
log('retry driving sampleNum')
time.sleep(1)
while not sicsController.getServerStatus().equals(ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.3)
cnt += 1
sics.handleInterrupt()
cur = sics.getValue('sampleNum').getFloatData()
if abs(cur - position) < 0.01:
log('sampleNum is already at ' + str(position))
return
def printQuokkaSettings():
datafile = sics.getValue('datafilename').getStringData()
if ((datafile.find('QKK') != -1) and (datafile.find('.nx.hdf') != -1)):
runNumber = (datafile.split('QKK')[1].split('.nx.hdf'))[0]
else:
runNumber = datafile
print
print "***** Quokka Instrument Settings *****"
print
print " Last Run Number: " + runNumber
print " Sample Name: " + sics.getValue('samplename').getStringData()
print
print " Attenuator: %.2f degree" % getAttValue()
print " Entrance Aperature: %.2f" % getEntRotApValue()
print "Guide Configuration: " + getGuideConfig()
print " Sample Position: " + str(getSamplePosition())
# print " Beam Stop 1: " + getBsPosition(1)
# print " Beam Stop 2: " + getBsPosition(2)
# print " Beam Stop 3: " + getBsPosition(3)
# print " Beam Stop 4: " + getBsPosition(4)
# print " Beam Stop 5: " + getBsPosition(5)
print " Beam Stop X: %.2f" % getBsxValue()
print " Beam Stop Z: %.2f" % getBszValue()
print " Detector Position: %.2f" %getDetPosition()
print " Detector Offset: %.2f" % getDetOffsetValue()
print
print "****************************************"
def driveSample(position):
log('Driving sample holder to position ' + str(position) + ' ...')
cur = sics.getValue('sampleNum').getFloatData()
if abs(cur - position) < 0.01:
log('sampleNum is already at ' + str(position))
return
sicsController = sics.getSicsController()
controller = sicsController.findComponentController(devices['sampleNum'])
# controller.drive(position)
cnt = 0
while cnt < 20:
try:
controller.drive(position)
break
except SicsExecutionException, e:
em = str(e.getMessage())
if em.__contains__('Interrupted'):
raise e
time.sleep(0.6)
log(str(e))
log('retry driving sampleNum')
time.sleep(1)
while not sicsController.getServerStatus().equals(ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.3)
cnt += 1
sics.handleInterrupt()
cur = sics.getValue('sampleNum').getFloatData()
if abs(cur - position) < 0.01:
log('sampleNum is already at ' + str(position))
return
def getLambdaValue():
try:
# For SICS after 2011-05
return sics.getValue('/instrument/velocity_selector/wavelength_nominal').getFloatData()
except sics.SicsError:
# For SICS prior to 2011-05
return sics.getValue('/instrument/velocity_selector/Lambda').getFloatData()
def drive_s2():
slog('drive s2 away to -50 and atrans to 0')
sics.multiDrive({'s2': -50, 'atrans':0})
s2.value = sics.getValue('s2').getFloatData()
atrans.value = sics.getValue('atrans').getFloatData()
sics.execute('s2 fixed 1')
print 'Please check if s2 is fixed!'
def printQuokkaSettings():
datafile = sics.getValue("datafilename").getStringData()
if (datafile.find("QKK") != -1) and (datafile.find(".nx.hdf") != -1):
runNumber = (datafile.split("QKK")[1].split(".nx.hdf"))[0]
else:
runNumber = datafile
msg = "\n"
msg += "***** Quokka Instrument Settings *****\n"
msg += "\n"
msg += " Last Run Number: " + runNumber + "\n"
msg += " Sample Name: " + sics.getValue("samplename").getStringData() + "\n"
msg += "\n"
msg += " Attenuator: %.2f degree" % getAttValue() + "\n"
msg += " Entrance Aperature: %.2f" % getEntRotApValue() + "\n"
msg += "Guide Configuration: " + getGuideConfig() + "\n"
try:
msg += " Sample Position: " + str(getSamplePosition()) + "\n"
except:
msg += " Sample Position: ???\n"
# print " Beam Stop 1: " + getBsPosition(1)
# print " Beam Stop 2: " + getBsPosition(2)
# print " Beam Stop 3: " + getBsPosition(3)
# print " Beam Stop 4: " + getBsPosition(4)
# print " Beam Stop 5: " + getBsPosition(5)
msg += " Beam Stop X: %.2f" % getBsxValue() + "\n"
msg += " Beam Stop Z: %.2f" % getBszValue() + "\n"
msg += " Detector Position: %.2f" % getDetPosition() + "\n"
msg += " Detector Offset: %.2f" % getDetOffsetValue() + "\n"
msg += "\n"
msg += "****************************************\n"
log(msg)
def printQuokkaSettings():
datafile = sics.getValue('datafilename').getStringData()
if ((datafile.find('QKK') != -1) and (datafile.find('.nx.hdf') != -1)):
runNumber = (datafile.split('QKK')[1].split('.nx.hdf'))[0]
else:
runNumber = datafile
msg = '\n'
msg += "***** Quokka Instrument Settings *****\n"
msg += '\n'
msg += " Last Run Number: " + runNumber + '\n'
msg += " Sample Name: " + sics.getValue('samplename').getStringData() + '\n'
msg += '\n'
msg += " Attenuator: %.2f degree" % getAttValue() + '\n'
msg += " Entrance Aperature: %.2f" % getEntRotApValue() + '\n'
msg += "Guide Configuration: " + getGuideConfig() + '\n'
try:
msg += " Sample Position: " + str(getSamplePosition()) + '\n'
except:
msg += " Sample Position: ???\n"
# print " Beam Stop 1: " + getBsPosition(1)
# print " Beam Stop 2: " + getBsPosition(2)
# print " Beam Stop 3: " + getBsPosition(3)
# print " Beam Stop 4: " + getBsPosition(4)
# print " Beam Stop 5: " + getBsPosition(5)
msg += " Beam Stop X: %.2f" % getBsxValue() + '\n'
msg += " Beam Stop Z: %.2f" % getBszValue() + '\n'
msg += " Detector Position: %.2f" %getDetPosition() + '\n'
msg += " Detector Offset: %.2f" % getDetOffsetValue() + '\n'
msg += '\n'
msg += "****************************************\n"
log(msg)
def getLambdaValue():
try:
# For SICS after 2011-05
return sics.getValue('/instrument/velocity_selector/wavelength_nominal').getFloatData()
except sics.SicsError:
# For SICS prior to 2011-05
return sics.getValue('/instrument/velocity_selector/Lambda').getFloatData()
def drive_a1_a2():
slog('drive a2 ' + str(m2.value))
slog('drive a1 ' + str(m1.value))
sics.multiDrive({'a1':m1.value, 'a2':m2.value})
a1.value = sics.getValue('a1').getFloatData()
a2.value = sics.getValue('a2').getFloatData()
scan_a1.value = str(math.ceil((a1.value - 1) * 1000) / 1000) + ', 0.2, 11, \'timer\', 1'
scan_a2.value = str(math.ceil((a2.value - 2.5) * 1000) / 1000) + ', 0.5, 11, \'timer\', 1'
def driveToLoadPosition():
log('Driving sample holder to load position')
# Find soft upper limit
upperlimit = sics.getValue('/sample/sample_x/softupperlim').getFloatData()
hardlimit = sics.getValue('/sample/sample_x/hardupperlim').getFloatData()
softzero = sics.getValue('/sample/sample_x/softzero').getFloatData()
if upperlimit > hardlimit - softzero:
upperlimit = hardlimit - softzero
# Use the soft lower limit as the load position
loadPosition = math.floor(upperlimit)
sics.drive('samx', loadPosition)
def getSlitGapAndOffset(aPath, a0, bPath, b0):
try:
a = sics.getValue(aPath).getFloatData()
b = sics.getValue(bPath).getFloatData()
gap = (a - a0 - (b - b0)) / 1.0
offset = (a - a0 + (b - b0)) / 2.0
return (gap, offset)
except:
return (float('nan'), float('nan'))
def driveToLoadPosition():
log('Driving sample holder to load position')
# Find soft upper limit
upperlimit = sics.getValue('/sample/sample_x/softupperlim').getFloatData()
hardlimit = sics.getValue('/sample/sample_x/hardupperlim').getFloatData()
softzero = sics.getValue('/sample/sample_x/softzero').getFloatData()
if upperlimit > hardlimit - softzero:
upperlimit = hardlimit - softzero
# Use the soft lower limit as the load position
loadPosition = math.floor(upperlimit)
sics.drive('samx', loadPosition)
def driveFlipper(value):
# Clear interrupt flag
sics.getSicsController().clearInterrupt()
# Set timeout to 120 sec
timeout = 120
counter = 0
# Set flipper
sics.set('/instrument/flipper/set_flip_on', value)
log('Driving flipper to ' + str(value) + "...")
while True:
flipperValue = sics.getValue('/instrument/flipper/flip_on').getIntData()
# Test if value is set
if flipperValue == value:
log('Flipper is set to ' + str(flipperValue))
return
else:
# Check timeout
if counter >= timeout:
raise Exception('Failed to set flipper to ' + str(value))
# Check interrupt
if sics.getSicsController().isInterrupted() == 1:
raise Exception('SICS has been interrupted')
# Otherwise sleep for 1 sec
counter += 1
time.sleep(1)
def selBs(beamstop):
# Get command controller
sicsController = sics.getSicsController()
commandController = sicsController.findComponentController('/commands/beamstops/selbsn')
# Configuring command properties
timeout = 10
count = 0
sics.hset(commandController, '/bs', beamstop)
while sics.getValue('/commands/beamstops/selbsn/bs').getIntData() != beamstop:
time.sleep(0.1)
count += 0.1
if count > timeout:
raise Exception("Time out on receiving feedback on beam stop selection")
cnt = 0
while cnt < 20:
try:
commandController.syncExecute();
break
except SicsExecutionException, e:
em = str(e.getMessage())
if em.__contains__('Interrupted'):
raise e
log('retry selecting beam stop ' + str(beamstop))
time.sleep(1)
while not sicsController.getServerStatus().equals(ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.3)
cnt += 1
def selBs(beamstop):
# Get command controller
sicsController = sics.getSicsController()
commandController = sicsController.findComponentController('/commands/beamstops/selbsn')
# Configuring command properties
timeout = 10
count = 0
sics.hset(commandController, '/bs', beamstop)
while sics.getValue('/commands/beamstops/selbsn/bs').getIntData() != beamstop:
time.sleep(0.1)
count += 0.1
if count > timeout:
raise Exception("Time out on receiving feedback on beam stop selection")
cnt = 0
while cnt < 20:
try:
commandController.syncExecute();
break
except SicsExecutionException, e:
em = str(e.getMessage())
if em.__contains__('Interrupted'):
raise e
log('retry selecting beam stop ' + str(beamstop))
time.sleep(1)
while not sicsController.getServerStatus().equals(ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.3)
cnt += 1
def driveFlipper(value):
# Clear interrupt flag
sics.getSicsController().clearInterrupt()
# Set timeout to 120 sec
timeout = 120
counter = 0
# Set flipper
sics.set('/instrument/flipper/set_flip_on', value)
log('Driving flipper to ' + str(value) + "...")
while True:
flipperValue = sics.getValue('/instrument/flipper/flip_on').getIntData()
# Test if value is set
if flipperValue == value:
log('Flipper is set to ' + str(flipperValue))
return
else:
# Check timeout
if counter >= timeout:
raise Exception('Failed to set flipper to ' + str(value))
# Check interrupt
if sics.getSicsController().isInterrupted() == 1:
raise Exception('SICS has been interrupted')
# Otherwise sleep for 1 sec
counter += 1
time.sleep(1)
def getter():
if useController:
controller = sics.getSicsController().findComponentController(path)
return controller.getValue().getStringData()
elif useRaw:
return str(sics.get_raw_value(path))
else:
return sics.getValue(path).getStringData()
def getter():
if useController:
controller = sics.getSicsController().findComponentController(path)
return controller.getValue().getIntData()
elif useRaw:
return int(sics.get_raw_value(path))
else:
return sics.getValue(path).getIntData()
def zero_offset():
dev = device_name.value
if dev != None and dev != '':
slog('set zero offset for ' + dev)
cur_value = sics.getValue(dev).getFloatData()
sics.setpos(dev, cur_value, visual_value.value)
slog('drive ' + dev + ' ' + str(cur_value))
sics.drive(dev, cur_value)
def getter():
if useController:
controller = sics.getSicsController().findComponentController(path)
if refresh:
controller.getValue(True)
return controller.getValue().getFloatData()
elif useRaw:
return float(sics.get_raw_value(path))
else:
return sics.getValue(path, refresh).getFloatData()
def selBs(beamstop):
# Get command controller
sicsController = sics.getSicsController()
commandController = sicsController.findComponentController('/commands/beamstops/selbsn')
# Configuring command properties
timeout = 10
count = 0
sics.hset(commandController, '/bs', beamstop)
while sics.getValue('/commands/beamstops/selbsn/bs').getIntData() != beamstop:
time.sleep(0.1)
count += 0.1
if count > timeout:
raise Exception("Time out on receiving feedback on beam stop selection")
# Synchronously run command
commandController.syncExecute()
def selBs(beamstop):
# Get command controller
sicsController = sics.getSicsController()
commandController = sicsController.findComponentController(
'/commands/beamstops/selbsn')
# Configuring command properties
timeout = 10
count = 0
sics.hset(commandController, '/bs', beamstop)
while sics.getValue(
'/commands/beamstops/selbsn/bs').getIntData() != beamstop:
time.sleep(0.1)
count += 0.1
if count > timeout:
raise Exception(
"Time out on receiving feedback on beam stop selection")
# Synchronously run command
commandController.syncExecute()
def getBsxValue():
return sics.getValue('bsx').getFloatData()
sample_name.title = 'Name'
sample_description = Par('string', 'UNKNOWN')
sample_description.title = 'Description'
sample_thickness = Par('string', '1', options=['0.01', '0.1', '1.0', '10.0'])
sample_thickness.title = 'Thickness (mm)'
Group('Sample').add(sample_name, sample_description, sample_thickness)
## Crystal
crystal_name = Par('string', 'UNKNOWN')
crystal_name.title = 'Name'
crystal_name.enabled = False
try:
m2om = sics.getValue('/instrument/crystal/m2om').getFloatData()
if m2om > 90:
crystal_name.value = 'Si111 (4.74 Angstroms)'
else:
crystal_name.value = 'Si311 (2.37 Angstroms)'
except:
pass
crystal_change = Act('switchCrystal()', 'switch to other crystal')
g0 = Group('Crystal')
g0.numColumns = 2
g0.add(crystal_name, crystal_change)
## Pre/Post-Sample Slit
def startScan(configModel):
''' setup '''
scanVariable = configModel.scanVariable
crystal = configModel.crystal
mode = configModel.mode
MainDeadTime = 1.08E-6
TransDeadTime = 1.08E-6
if 'Si111' in crystal:
empLevel = 0.3
bkgLevel = 0.277
dOmega = 2.3E-6
gDQv = 0.0586
gDQh = 0
wavelength = 4.74
TransmissionTube = 10
TransBackground = 0 # counts per second
elif 'Si311' in crystal:
empLevel = 0.34
bkgLevel = 0.333
dOmega = 4.6E-7
gDQv = 0.117
gDQh = 0
wavelength = 2.37
TransmissionTube = 9
TransBackground = 0 # counts per second
else:
print 'selected crystal is invalid'
return
''' angles '''
scan = configModel.scan
scan_angleMin = builtin_min(scan['angles'])
scan_angleMax = builtin_max(scan['angles'])
if ('m1om' in scanVariable) or ('m2om' in scanVariable):
tolerance = 2
approved = False
if 'Si111' in crystal:
if (180 - tolerance <= scan_angleMin) and (scan_angleMax <=
180 + tolerance):
approved = True
elif 'Si311' in crystal:
if (0 - tolerance <= scan_angleMin) and (scan_angleMax <=
0 + tolerance):
approved = True
if not approved:
print 'angle out of range'
return
''' execution '''
sics.execute('hset user/name ' + configModel.user_name)
sics.execute('hset user/email ' + configModel.user_email)
sics.execute('hset sample/name ' + configModel.sample_name)
sics.execute('hset sample/description ' + configModel.sample_description)
sics.execute('hset sample/thickness %g' % configModel.sample_thickness)
sics.execute('hset experiment/bkgLevel %g' % bkgLevel)
sics.execute('hset experiment/empLevel %g' % empLevel)
sics.execute('hset instrument/detector/MainDeadTime %g' % MainDeadTime)
sics.execute('hset instrument/detector/TransDeadTime %g' % TransDeadTime)
sics.execute('hset instrument/detector/TransBackground %g' %
TransBackground)
sics.execute('hset instrument/detector/TransmissionTube %i' %
TransmissionTube)
sics.execute('hset instrument/crystal/dOmega %g' % dOmega)
sics.execute('hset instrument/crystal/gDQv %g' % gDQv)
sics.execute('hset instrument/crystal/gDQh %g' % gDQh)
sics.execute('hset instrument/crystal/wavelength %g' % wavelength)
sics.execute('hset instrument/crystal/scan_variable ' + scanVariable)
sicsController = sics.getSicsController()
# slits
def getSlitValues(gap, offset, a0, b0, aOpen, bOpen):
if gap == 'fully opened':
return (aOpen, bOpen)
if gap == 'fully closed':
gap = -5.0
offset = 0.0
a = a0 + 0.5 * float(gap) + float(offset)
b = b0 - 0.5 * float(gap) + float(offset)
return (a, b)
ss1vg = configModel.ss1vg
ss1vo = configModel.ss1vo
ss1hg = configModel.ss1hg
ss1ho = configModel.ss1ho
ss2vg = configModel.ss2vg
ss2vo = configModel.ss2vo
ss2hg = configModel.ss2hg
ss2ho = configModel.ss2ho
(ss1u, ss1d) = getSlitValues(ss1vg, ss1vo, ss1u0, ss1d0, 35.8, -38.8)
(ss1r, ss1l) = getSlitValues(ss1hg, ss1ho, ss1r0, ss1l0, 57.0, -58.0)
(ss2u, ss2d) = getSlitValues(ss2vg, ss2vo, ss2u0, ss2d0, 37.0, -39.5)
(ss2r, ss2l) = getSlitValues(ss2hg, ss2ho, ss2r0, ss2l0, 35.0, -35.0)
# apply slits
run = {}
run['ss1u'] = ss1u
run['ss1d'] = ss1d
run['ss1r'] = ss1r
run['ss1l'] = ss1l
run['ss2u'] = ss2u
run['ss2d'] = ss2d
run['ss2r'] = ss2r
run['ss2l'] = ss2l
sics.multiDrive(run)
time.sleep(2)
while not sicsController.getServerStatus().equals(
ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.1)
'''
sics.execute('run ss1u %.2f' % ss1u)
sics.execute('run ss1d %.2f' % ss1d)
sics.execute('run ss1r %.2f' % ss1r)
sics.execute('run ss1l %.2f' % ss1l)
sics.execute('run ss2u %.2f' % ss2u)
sics.execute('run ss2d %.2f' % ss2d)
sics.execute('run ss2r %.2f' % ss2r)
sics.execute('run ss2l %.2f' % ss2l)
'''
# load sample positions
sam_positions = str(configModel.sam_position)
if (len(sam_positions) == 0) or (sam_positions == 'fixed'):
samz_list = [None]
else:
samz_list = []
pos2samz = {}
pos2samz['1'] = 33.5
pos2samz['2'] = 178.5
pos2samz['3'] = 323.5
pos2samz['4'] = 468.5
pos2samz['5'] = 613.5
pos2samz['1 top'] = 17.4
pos2samz['1 bottom'] = 77.7
pos2samz['2 top'] = 163.5
pos2samz['2 bottom'] = 223.1
pos2samz['3 top'] = 308.0
pos2samz['3 bottom'] = 368.1
pos2samz['4 top'] = 454.1
pos2samz['4 bottom'] = 513.6
pos2samz['5 top'] = 598.2
pos2samz['5 bottom'] = 658.0
samz_list.append(pos2samz[sam_positions])
'''
for range in filter(None, sam_positions.split(',')):
rangeItems = range.split('-')
if ('' in rangeItems) or (len(rangeItems) < 1) or (len(rangeItems) > 2):
raise Exception('format in "Sample Position" is incorrect')
if len(rangeItems) == 1:
samz_list.append(pos2samz[int(rangeItems[0])])
else:
for i in xrange(int(rangeItems[0]), int(rangeItems[1])+1):
samz_list.append(pos2samz[i])
if len(samz_list) == 0:
samz_list = [0.0]
'''
for samz in samz_list:
sics.execute('histmem stop')
time.sleep(3)
sics.execute('histmem mode time')
if samz is not None:
print 'run samz %.2f' % samz
sics.execute('run samz %.2f' % samz)
# sics.execute('prun samz 2' % samz) !!!
time.sleep(1)
while not sicsController.getServerStatus().equals(
ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.1)
sics.execute('newfile HISTOGRAM_XYT')
#sics.execute('autosave 60') # 60 seconds
time.sleep(1)
# start/stop hmm
if mode == 'count_roi':
sics.execute('histmem preset %i' % 1)
time.sleep(1)
sics.execute('histmem start')
time.sleep(5)
while not sicsController.getServerStatus().equals(
ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.1)
sics.execute('histmem stop')
print 'frames:', len(scan['angles'])
for frame_index in xrange(len(scan['angles'])):
angle = scan['angles'][frame_index]
preset = scan['presets'][frame_index]
maxTime = scan['maxTimes'][frame_index]
print 'run %s %.6f' % (scanVariable, angle)
sics.execute('run %s %.6f' % (scanVariable, angle))
time.sleep(10)
while not sicsController.getServerStatus().equals(
ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.1)
print 'run done'
time.sleep(1)
print 'histmem start'
while True:
if mode == 'count_roi':
sics.execute('histmem preset %i' % maxTime)
else:
sics.execute('histmem preset %i' % preset)
time.sleep(5)
sics.execute('histmem start')
time.sleep(5)
if mode == 'count_roi':
print 'count_roi'
time.sleep(configModel.min_time)
count_roi = 0
while not sicsController.getServerStatus().equals(
ServerStatus.EAGER_TO_EXECUTE):
try:
count_roi = int(
sicsext.runCommand(
'hmm configure num_events_filled_to_count_roi'
))
print count_roi
if count_roi > preset:
print count_roi
print 'reached desired count_roi'
sics.execute('histmem pause')
time.sleep(1)
break
except:
pass
time.sleep(0.5)
break
else:
while not sicsController.getServerStatus().equals(
ServerStatus.EAGER_TO_EXECUTE):
time.sleep(0.1)
valid = False
for i in xrange(10):
time.sleep(1)
detector_time = sics.getValue(
'/instrument/detector/time').getFloatData()
valid = (detector_time >= preset - 1) or (
detector_time >= preset * 0.90)
if valid:
break
print 'detector_time:', detector_time
if valid:
break
else:
print 'scan was invalid and needs to be repeated'
#sics.execute('histmem stop')
sics.execute('save %i' % frame_index)
frame_index += 1
print 'histmem done'
sics.execute('newfile clear')
#sics.execute('autosave 0') # disable autosave
# Get output filename
filenameController = sicsController.findDeviceController(
'datafilename')
savedFilename = filenameController.getValue().getStringData()
print 'saved:', savedFilename
print 'done'
print
def getDetPosition():
return sics.getValue('det').getIntData()
def getGlobalMapRate():
return sics.getValue('/instrument/detector/total_maprate').getFloatData()
def getBsRailPosition():
return sics.getValue('bsx').getIntData()
def getEntRotApValue():
return sics.getValue('srce').getIntData()
def getBszValue():
return sics.getValue('bsz').getFloatData()
def getBsxValue():
return sics.getValue('bsx').getFloatData()
m2_new.value = 2 * m1_new.value
slog('Chi2 = ' + str(fit_quality.value))
slog('lambda = ' + str(lambda_fit.value))
slog('meV = ' + str((h * pl / lambda_fit.value / m) ** 2 * m * 500 / eV))
slog('two-theta_offset = ' + str(two_theta_off.value * 180 / math.pi))
def offset_s2():
ic = confirm('Please confirm the s2 and m2 offset')
if ic :
slog('setpos s2 ' + str(-two_theta_off.value) + ' 0')
sics.setpos('s2', -two_theta_off.value, 0)
else:
raise Exception, 'S2 offset not accepted'
G3 = Group('m1 and m2 Zero Offsets')
m1_old = Par('float', sics.getValue('m1').getFloatData())
m1_new = Par('float', 0)
m2_old = Par('float', sics.getValue('m2').getFloatData())
m2_new = Par('float', 0)
offset_done = Par('bool', False)
act4 = Act('offset_m2m1()', 'Set m1, m2 Zero Offset')
G3.add(m1_old, m1_new, m2_old, m2_new, offset_done, act4)
def offset_m2m1():
if offset_done.value :
print 'You have already set the zero offset'
else:
slog('setpos m1 ' + str(m1_old.value) + ' ' + str(m1_new.value))
sics.setpos('m1', m1_old.value, m1_new.value)
sics.drive('m1', m1_old.value)
slog('setpos m2 ' + str(m2_old.value) + ' ' + str(m2_new.value))
sics.setpos('m2', m2_old.value, m2_new.value)
def getJulaboValue():
return sics.getValue('/sample/tc1').getFloatData()
def getEntRotApValue():
return sics.getValue('srce').getIntData()
def getGuideConfig():
return sics.getValue('/commands/optics/guide/configuration').getStringData()
def getBsRailPosition():
return sics.getValue('bsx').getIntData()
def getBszValue():
return sics.getValue('bsz').getFloatData()
def getL1Value():
return sics.getValue('l1').getFloatData()
def getGuideConfig():
return sics.getValue('/commands/optics/guide/configuration').getStringData()
def getAttValue():
""" Do something hard
"""
return sics.getValue('att').getIntData()
def getJulaboValue():
return sics.getValue('/sample/tc1').getFloatData()
def getDetPosition():
return sics.getValue('det').getIntData()
def getMaxBinRate():
return sics.getValue('/instrument/detector/max_binrate').getFloatData()
def getDetOffsetValue():
return sics.getValue('detoff').getFloatData()
def getAttValue():
""" Do something hard
"""
return sics.getValue('att').getIntData()
def getL1Value():
return sics.getValue('l1').getFloatData()
def getL2Value():
return sics.getValue('l2').getFloatData()
def getDetOffsetValue():
return sics.getValue('detoff').getFloatData()
global peak_res
if Ei.value < 30:
npeak = 6
elif Ei.value < 50:
npeak = 5
else:
npeak = 6
twod = array.instance([npeak])
peaks = array.instance([npeak])
peak_res = array.instance([npeak], init = float('nan'))
pact = Act('previous_step()', '<- Previous Step')
sics.getDeviceController('ei').getValue(True)
ei_val = sics.getValue('ei').getFloatData()
Ei = Par('float', ei_val, command = 'calc_peaks()')
ei_old = Ei.value
lmd = Par('float', 0)
act_all = Act('run_all()', 'Scan All 6 Peaks Automatically')
G1 = Group('Peak 1')
peak_1 = Par('float', 0)
scan_1 = Par('string', '')
act1 = Act('scan_peak(0)', 'Scan Peak 1')
found_1 = Par('bool', False)
G1.add(peak_1, scan_1, act1, found_1)
G2 = Group('Peak 2')
peak_2 = Par('float', 0)
scan_2 = Par('string', '')
def getL2Value():
return sics.getValue('l2').getFloatData()
# script info
__script__.title = 'Alignment Finished'
__script__.version = ''
previous_file = 'auto_8_scan_en.py'
# Use below example to create parameters.
# The type can be string, int, float, bool, file.
cact = Act('', 'The alignment is finished.')
G1 = Group('Devices Status')
sics.execute('tasub update')
sics.getDeviceController('ei').getValue(True)
sics.getDeviceController('ef').getValue(True)
sics.getDeviceController('en').getValue(True)
m1 = Par('float', sics.getValue('m1').getFloatData())
m2 = Par('float', sics.getValue('m2').getFloatData())
s1 = Par('float', sics.getValue('s1').getFloatData())
s2 = Par('float', sics.getValue('s2').getFloatData())
a1 = Par('float', sics.getValue('a1').getFloatData())
a2 = Par('float', sics.getValue('a2').getFloatData())
Ei = Par('float', sics.getValue('ei').getFloatData())
Ef = Par('float', sics.getValue('ef').getFloatData())
En = Par('float', sics.getValue('en').getFloatData())
G1.add(m1, m2, s1, s2, a1, a2, Ei, Ef, En)
sics.execute('s2 fixed -1')
pact = Act('previous_step()', '<- Previous Step')
def fit_curve():
def getMaxBinRate():
return sics.getValue('/instrument/detector/max_binrate').getFloatData()
# Script control setup area
# script info
__script__.title = 'Run En Scan'
__script__.version = ''
previous_file = 'auto_7_align_a1a2.py'
next_file = 'auto_9_finished.py'
# Use below example to create parameters.
# The type can be string, int, float, bool, file.
pact = Act('', 'Calibration Finished')
G1 = Group('Scan En')
sics.getDeviceController('ei').getValue(True)
sics.getDeviceController('en').getValue(True)
ei = Par('float', sics.getValue('ei').getFloatData())
en = Par('float', sics.getValue('en').getFloatData())
scan = Par('string', '0, 0.25, 17, \'timer\', 1')
act2 = Act('scan_en()', 'Scan on en')
def scan_en():
aname = 'en'
try:
if DEBUGGING :
aname = 'dummy_motor'
except:
pass
axis_name.value = aname
sicsext.call_back = __load_experiment_data__
slog('s2 fixed 1')
sics.execute('s2 fixed 1')
slog('bmonscan ' + aname + ' ' + scan.value)
def getGlobalMapRate():
return sics.getValue('/instrument/detector/total_maprate').getFloatData()
