Пример #1
0
def main(write_output=True,
        dir_tag=TAG_NONE,
        neu_tag=TAG_NONE,
        rad_tag=TAG_ALL,
        flux_type_arg="upwind"):
    from math import sin, cos, pi, exp, sqrt  # noqa

    from hedge.backends import guess_run_context
    rcon = guess_run_context()

    dim = 2

    if dim == 1:
        if rcon.is_head_rank:
            from hedge.mesh.generator import make_uniform_1d_mesh
            mesh = make_uniform_1d_mesh(-10, 10, 500)
    elif dim == 2:
        from hedge.mesh.generator import make_rect_mesh
        if rcon.is_head_rank:
            mesh = make_rect_mesh(a=(-1, -1), b=(1, 1), max_area=0.003)
    elif dim == 3:
        if rcon.is_head_rank:
            from hedge.mesh.generator import make_ball_mesh
            mesh = make_ball_mesh(max_volume=0.0005)
    else:
        raise RuntimeError("bad number of dimensions")

    if rcon.is_head_rank:
        print "%d elements" % len(mesh.elements)
        mesh_data = rcon.distribute_mesh(mesh)
    else:
        mesh_data = rcon.receive_mesh()

    discr = rcon.make_discretization(mesh_data, order=4)

    from hedge.timestep.runge_kutta import LSRK4TimeStepper
    stepper = LSRK4TimeStepper()

    from hedge.visualization import VtkVisualizer
    if write_output:
        vis = VtkVisualizer(discr, rcon, "fld")

    source_center = np.array([0.7, 0.4])
    source_width = 1/16
    source_omega = 3

    import hedge.optemplate as sym
    sym_x = sym.nodes(2)
    sym_source_center_dist = sym_x - source_center

    from hedge.models.wave import VariableVelocityStrongWaveOperator
    op = VariableVelocityStrongWaveOperator(
            c=sym.If(sym.Comparison(
                np.dot(sym_x, sym_x), "<", 0.4**2),
                1, 0.5),
            dimensions=discr.dimensions,
            source=
            sym.CFunction("sin")(source_omega*sym.ScalarParameter("t"))
            * sym.CFunction("exp")(
                -np.dot(sym_source_center_dist, sym_source_center_dist)
                / source_width**2),
            dirichlet_tag=dir_tag,
            neumann_tag=neu_tag,
            radiation_tag=rad_tag,
            flux_type=flux_type_arg
            )

    from hedge.tools import join_fields
    fields = join_fields(discr.volume_zeros(),
            [discr.volume_zeros() for i in range(discr.dimensions)])

    # {{{ diagnostics setup

    from pytools.log import LogManager, \
            add_general_quantities, \
            add_simulation_quantities, \
            add_run_info

    if write_output:
        log_file_name = "wave.dat"
    else:
        log_file_name = None

    logmgr = LogManager(log_file_name, "w", rcon.communicator)
    add_run_info(logmgr)
    add_general_quantities(logmgr)
    add_simulation_quantities(logmgr)
    discr.add_instrumentation(logmgr)

    from pytools.log import IntervalTimer
    vis_timer = IntervalTimer("t_vis", "Time spent visualizing")
    logmgr.add_quantity(vis_timer)
    stepper.add_instrumentation(logmgr)

    from hedge.log import LpNorm
    u_getter = lambda: fields[0]
    logmgr.add_quantity(LpNorm(u_getter, discr, 1, name="l1_u"))
    logmgr.add_quantity(LpNorm(u_getter, discr, name="l2_u"))

    logmgr.add_watches(["step.max", "t_sim.max", "l2_u", "t_step.max"])

    # }}}

    # {{{ timestep loop

    rhs = op.bind(discr)
    try:
        from hedge.timestep.stability import \
                approximate_rk4_relative_imag_stability_region
        max_dt = (
                1/discr.compile(op.max_eigenvalue_expr())()
                * discr.dt_non_geometric_factor()
                * discr.dt_geometric_factor()
                * approximate_rk4_relative_imag_stability_region(stepper))
        if flux_type_arg == "central":
            max_dt *= 0.25

        from hedge.timestep import times_and_steps
        step_it = times_and_steps(final_time=3, logmgr=logmgr,
                max_dt_getter=lambda t: max_dt)

        for step, t, dt in step_it:
            if step % 10 == 0 and write_output:
                visf = vis.make_file("fld-%04d" % step)

                vis.add_data(visf,
                        [
                            ("u", fields[0]),
                            ("v", fields[1:]),
                        ],
                        time=t,
                        step=step)
                visf.close()

            fields = stepper(fields, t, dt, rhs)

        assert discr.norm(fields) < 1
    finally:
        if write_output:
            vis.close()

        logmgr.close()
        discr.close()
Пример #2
0
def main(write_output=True,
         dir_tag=TAG_NONE,
         neu_tag=TAG_NONE,
         rad_tag=TAG_ALL,
         flux_type_arg="upwind"):
    from math import sin, cos, pi, exp, sqrt  # noqa

    from hedge.backends import guess_run_context
    rcon = guess_run_context()

    dim = 2

    if dim == 1:
        if rcon.is_head_rank:
            from hedge.mesh.generator import make_uniform_1d_mesh
            mesh = make_uniform_1d_mesh(-10, 10, 500)
    elif dim == 2:
        from hedge.mesh.generator import make_rect_mesh
        if rcon.is_head_rank:
            mesh = make_rect_mesh(a=(-1, -1), b=(1, 1), max_area=0.003)
    elif dim == 3:
        if rcon.is_head_rank:
            from hedge.mesh.generator import make_ball_mesh
            mesh = make_ball_mesh(max_volume=0.0005)
    else:
        raise RuntimeError("bad number of dimensions")

    if rcon.is_head_rank:
        print "%d elements" % len(mesh.elements)
        mesh_data = rcon.distribute_mesh(mesh)
    else:
        mesh_data = rcon.receive_mesh()

    discr = rcon.make_discretization(mesh_data, order=4)

    from hedge.timestep.runge_kutta import LSRK4TimeStepper
    stepper = LSRK4TimeStepper()

    from hedge.visualization import VtkVisualizer
    if write_output:
        vis = VtkVisualizer(discr, rcon, "fld")

    source_center = np.array([0.7, 0.4])
    source_width = 1 / 16
    source_omega = 3

    import hedge.optemplate as sym
    sym_x = sym.nodes(2)
    sym_source_center_dist = sym_x - source_center

    from hedge.models.wave import VariableVelocityStrongWaveOperator
    op = VariableVelocityStrongWaveOperator(
        c=sym.If(sym.Comparison(np.dot(sym_x, sym_x), "<", 0.4**2), 1, 0.5),
        dimensions=discr.dimensions,
        source=sym.CFunction("sin")(source_omega * sym.ScalarParameter("t")) *
        sym.CFunction("exp")(
            -np.dot(sym_source_center_dist, sym_source_center_dist) /
            source_width**2),
        dirichlet_tag=dir_tag,
        neumann_tag=neu_tag,
        radiation_tag=rad_tag,
        flux_type=flux_type_arg)

    from hedge.tools import join_fields
    fields = join_fields(
        discr.volume_zeros(),
        [discr.volume_zeros() for i in range(discr.dimensions)])

    # {{{ diagnostics setup

    from pytools.log import LogManager, \
            add_general_quantities, \
            add_simulation_quantities, \
            add_run_info

    if write_output:
        log_file_name = "wave.dat"
    else:
        log_file_name = None

    logmgr = LogManager(log_file_name, "w", rcon.communicator)
    add_run_info(logmgr)
    add_general_quantities(logmgr)
    add_simulation_quantities(logmgr)
    discr.add_instrumentation(logmgr)

    from pytools.log import IntervalTimer
    vis_timer = IntervalTimer("t_vis", "Time spent visualizing")
    logmgr.add_quantity(vis_timer)
    stepper.add_instrumentation(logmgr)

    from hedge.log import LpNorm
    u_getter = lambda: fields[0]
    logmgr.add_quantity(LpNorm(u_getter, discr, 1, name="l1_u"))
    logmgr.add_quantity(LpNorm(u_getter, discr, name="l2_u"))

    logmgr.add_watches(["step.max", "t_sim.max", "l2_u", "t_step.max"])

    # }}}

    # {{{ timestep loop

    rhs = op.bind(discr)
    try:
        from hedge.timestep.stability import \
                approximate_rk4_relative_imag_stability_region
        max_dt = (1 / discr.compile(op.max_eigenvalue_expr())() *
                  discr.dt_non_geometric_factor() *
                  discr.dt_geometric_factor() *
                  approximate_rk4_relative_imag_stability_region(stepper))
        if flux_type_arg == "central":
            max_dt *= 0.25

        from hedge.timestep import times_and_steps
        step_it = times_and_steps(final_time=3,
                                  logmgr=logmgr,
                                  max_dt_getter=lambda t: max_dt)

        for step, t, dt in step_it:
            if step % 10 == 0 and write_output:
                visf = vis.make_file("fld-%04d" % step)

                vis.add_data(visf, [
                    ("u", fields[0]),
                    ("v", fields[1:]),
                ],
                             time=t,
                             step=step)
                visf.close()

            fields = stepper(fields, t, dt, rhs)

        assert discr.norm(fields) < 1
    finally:
        if write_output:
            vis.close()

        logmgr.close()
        discr.close()
Пример #3
0
def main(write_output=True, \
        dir_tag=TAG_NONE, \
        neu_tag=TAG_NONE,\
        rad_tag=TAG_ALL,
        flux_type_arg="upwind"):
    from math import sin, cos, pi, exp, sqrt

    from hedge.backends import guess_run_context
    rcon = guess_run_context()

    dim = 2

    if dim == 1:
        if rcon.is_head_rank:
            from hedge.mesh.generator import make_uniform_1d_mesh
            mesh = make_uniform_1d_mesh(-10, 10, 500)
    elif dim == 2:
        from hedge.mesh.generator import make_rect_mesh
        if rcon.is_head_rank:
            mesh = make_rect_mesh(a=(-1,-1),b=(1,1),max_area=0.003)
    elif dim == 3:
        if rcon.is_head_rank:
            from hedge.mesh.generator import make_ball_mesh
            mesh = make_ball_mesh(max_volume=0.0005)
    else:
        raise RuntimeError, "bad number of dimensions"

    if rcon.is_head_rank:
        print "%d elements" % len(mesh.elements)
        mesh_data = rcon.distribute_mesh(mesh)
    else:
        mesh_data = rcon.receive_mesh()

    discr = rcon.make_discretization(mesh_data, order=4)

    from hedge.timestep import RK4TimeStepper
    stepper = RK4TimeStepper()

    from hedge.visualization import VtkVisualizer
    if write_output:
        vis = VtkVisualizer(discr, rcon, "fld")

    def source_u(x, el):
        x = x - numpy.array([0.7, 0.4])
        return exp(-numpy.dot(x, x)*256)

    def c_speed(x, el):
        if la.norm(x) < 0.4:
            return 1
        else:
            return 0.5

    from hedge.models.wave import VariableVelocityStrongWaveOperator
    from hedge.data import \
            TimeIntervalGivenFunction, \
            make_tdep_given
    from hedge.mesh import TAG_ALL, TAG_NONE
    op = VariableVelocityStrongWaveOperator(
            make_tdep_given(c_speed),
            discr.dimensions, 
            source=TimeIntervalGivenFunction(
                make_tdep_given(source_u),
                0, 0.1),
            dirichlet_tag=dir_tag,
            neumann_tag=neu_tag,
            radiation_tag=rad_tag,
            flux_type=flux_type_arg
            )

    from hedge.tools import join_fields
    fields = join_fields(discr.volume_zeros(),
            [discr.volume_zeros() for i in range(discr.dimensions)])

    # diagnostics setup -------------------------------------------------------
    from pytools.log import LogManager, \
            add_general_quantities, \
            add_simulation_quantities, \
            add_run_info

    if write_output:
        log_file_name = "wave.dat"
    else:
        log_file_name = None

    logmgr = LogManager(log_file_name, "w", rcon.communicator)
    add_run_info(logmgr)
    add_general_quantities(logmgr)
    add_simulation_quantities(logmgr)
    discr.add_instrumentation(logmgr)

    from pytools.log import IntervalTimer
    vis_timer = IntervalTimer("t_vis", "Time spent visualizing")
    logmgr.add_quantity(vis_timer)
    stepper.add_instrumentation(logmgr)

    from hedge.log import Integral, LpNorm
    u_getter = lambda: fields[0]
    logmgr.add_quantity(LpNorm(u_getter, discr, 1, name="l1_u"))
    logmgr.add_quantity(LpNorm(u_getter, discr, name="l2_u"))

    logmgr.add_watches(["step.max", "t_sim.max", "l2_u", "t_step.max"])

    # timestep loop -----------------------------------------------------------
    rhs = op.bind(discr)
    try:
        dt = op.estimate_timestep(discr, stepper=stepper, fields=fields)
        if flux_type_arg == "central":
            dt *= 0.25

        from hedge.timestep import times_and_steps
        step_it = times_and_steps(final_time=3, logmgr=logmgr,
                max_dt_getter=lambda t: dt)

        for step, t, dt in step_it:
            if step % 10 == 0 and write_output:
                visf = vis.make_file("fld-%04d" % step)

                vis.add_data(visf,
                        [
                            ("u", fields[0]),
                            ("v", fields[1:]), 
                            ("c", op.c.volume_interpolant(0, discr)), 
                        ],
                        time=t,
                        step=step)
                visf.close()

            fields = stepper(fields, t, dt, rhs)

        assert discr.norm(fields) < 1
    finally:
        if write_output:
            vis.close()

        logmgr.close()
        discr.close()