def test_install_configure_start(self, setup_tester_ssh_connection, mender_dist_packages_versions, mender_version):
result = setup_tester_ssh_connection.run('uname -a')
assert "raspberrypi" in result.stdout
upload_deb_package(setup_tester_ssh_connection, mender_dist_packages_versions["mender-client"])
# Install the package using the following flow in the wizard:
# Device type (for example raspberrypi3-raspbian): rasbperrytest
# Confirm devicetype as rasbperrytest? [Y/n] y
# Are you connecting this device to Hosted Mender? [Y/n] n
# Do you want to run the client in demo mode? [Y/n] y
# Set the IP of the Mender Server: [127.0.0.1] 1.2.3.4
result = setup_tester_ssh_connection.run('sudo dpkg -i ' + package_filename(mender_dist_packages_versions["mender-client"]) + """ <<STDIN
rasbperrytest
y
n
y
1.2.3.4
STDIN""")
assert "Unpacking mender-client (" + mender_dist_packages_versions["mender-client"] + ")" in result.stdout
assert "Setting up mender-client (" + mender_dist_packages_versions["mender-client"] + ")" in result.stdout
self.check_mender_client_version(setup_tester_ssh_connection, mender_version, mender_dist_packages_versions["mender-client"])
self.check_installed_files(setup_tester_ssh_connection, "rasbperrytest")
# Demo setup expects ServerURL docker.mender.io with IP address in /etc/hosts
result = setup_tester_ssh_connection.run('cat /etc/mender/mender.conf')
assert '"ServerURL": "https://docker.mender.io"' in result.stdout
result = setup_tester_ssh_connection.run('cat /etc/hosts')
assert re.match(r".*1\.2\.3\.4\s*docker\.mender\.io.*", result.stdout, re.DOTALL) is not None
self.check_systemd_start_full_cycle(setup_tester_ssh_connection)
def test_mender_gateway(self, setup_tester_ssh_connection,
mender_dist_packages_versions):
# Upload
upload_deb_package(
setup_tester_ssh_connection,
mender_dist_packages_versions["mender-gateway"],
"mender-gateway",
)
# Install
result = setup_tester_ssh_connection.run(
"sudo DEBIAN_FRONTEND=noninteractive dpkg -i " + package_filename(
mender_dist_packages_versions["mender-gateway"],
"mender-gateway",
))
assert ("Unpacking mender-gateway (" +
mender_dist_packages_versions["mender-gateway"] + ")"
in result.stdout)
assert ("Setting up mender-gateway (" +
mender_dist_packages_versions["mender-gateway"] + ")"
in result.stdout)
# Check mender-gateway files
setup_tester_ssh_connection.run("test -x /usr/bin/mender-gateway")
setup_tester_ssh_connection.run(
"test -f /etc/mender/mender-gateway.conf")
setup_tester_ssh_connection.run(
"test -f /lib/systemd/system/mender-gateway.service")
def test_mender_client_service_starts_after_reboot(
self,
setup_test_container,
setup_tester_ssh_connection,
mender_dist_packages_versions,
):
conn = setup_tester_ssh_connection
upload_deb_package(conn,
mender_dist_packages_versions["mender-client"])
conn.run(
"sudo DEBIAN_FRONTEND=noninteractive dpkg -i " +
package_filename(mender_dist_packages_versions["mender-client"]))
# Reboot in the background, so that SSH can exit properly
conn.run("sleep 1 && sudo reboot &")
# Wait for the reboot to actually start before calling wait_for_container_boot
time.sleep(10)
wait_for_container_boot(setup_test_container.container_id)
# Check first that mender process is running
result = conn.run("pgrep mender")
assert result.exited == 0
result = conn.run("sudo journalctl -u mender-client --no-pager")
# Check Mender service start after device reboot
assert "Started Mender OTA update service." in result.stdout
assert "Loaded configuration file" in result.stdout
assert "No dual rootfs configuration present" in result.stdout
def test_install_configure_start(self, setup_tester_ssh_connection,
mender_dist_packages_versions,
mender_version):
result = setup_tester_ssh_connection.run("uname -a")
assert "raspberrypi" in result.stdout
upload_deb_package(setup_tester_ssh_connection,
mender_dist_packages_versions["mender-client"])
# Install the deb package. On failure, install the missing dependencies.
result = setup_tester_ssh_connection.run(
"sudo DEBIAN_FRONTEND=noninteractive dpkg -i " +
package_filename(mender_dist_packages_versions["mender-client"]) +
"|| sudo apt-get -f -y install")
assert ("Unpacking mender-client (" +
mender_dist_packages_versions["mender-client"] + ")"
in result.stdout)
assert ("Setting up mender-client (" +
mender_dist_packages_versions["mender-client"] + ")"
in result.stdout)
self.check_mender_client_version(
setup_tester_ssh_connection,
mender_version,
mender_dist_packages_versions["mender-client"],
)
self.check_installed_files(setup_tester_ssh_connection, "raspberrypi")
# Default setup expects ServerURL hosted.mender.io
result = setup_tester_ssh_connection.sudo(
"cat /etc/mender/mender.conf")
assert '"ServerURL": "https://hosted.mender.io"' in result.stdout
self.check_systemd_start_full_cycle(setup_tester_ssh_connection)
def test_install_configure_start(
self, setup_tester_ssh_connection, mender_dist_packages_versions, mender_version
):
result = setup_tester_ssh_connection.run("uname -a")
assert "raspberrypi" in result.stdout
upload_deb_package(
setup_tester_ssh_connection, mender_dist_packages_versions["mender-client"]
)
# Install the package using the following flow for "mender setup":
# ...
# Enter a name for the device type (e.g. raspberrypi3): [raspberrypi] raspberrytest
# Are you connecting this device to hosted.mender.io? [Y/n] n
# Do you want to run the client in demo mode? [Y/n] y
# Set the IP of the Mender Server: [127.0.0.1] 1.2.3.4
# Mender setup successfully.
# ...
result = setup_tester_ssh_connection.run(
"sudo dpkg -i "
+ package_filename(mender_dist_packages_versions["mender-client"])
+ """ <<STDIN
raspberrytest
n
y
1.2.3.4
STDIN"""
)
assert (
"Unpacking mender-client ("
+ mender_dist_packages_versions["mender-client"]
+ ")"
in result.stdout
)
assert (
"Setting up mender-client ("
+ mender_dist_packages_versions["mender-client"]
+ ")"
in result.stdout
)
self.check_mender_client_version(setup_tester_ssh_connection, mender_version)
self.check_installed_files(setup_tester_ssh_connection, "raspberrytest")
# Demo setup expects ServerURL docker.mender.io with IP address in /etc/hosts
result = setup_tester_ssh_connection.sudo("cat /etc/mender/mender.conf")
assert '"ServerURL": "https://docker.mender.io"' in result.stdout
result = setup_tester_ssh_connection.run("cat /etc/hosts")
assert (
re.match(r".*1\.2\.3\.4\s*docker\.mender\.io.*", result.stdout, re.DOTALL)
is not None
)
self.check_systemd_start_full_cycle(setup_tester_ssh_connection)
def test_mender_connect(
self,
setup_tester_ssh_connection,
mender_dist_packages_versions,
mender_connect_version,
):
# Upload
upload_deb_package(
setup_tester_ssh_connection,
mender_dist_packages_versions["mender-connect"],
"mender-connect",
)
# Install
result = setup_tester_ssh_connection.run(
"sudo DEBIAN_FRONTEND=noninteractive dpkg -i "
+ package_filename(
mender_dist_packages_versions["mender-connect"], "mender-connect"
)
)
assert (
"Unpacking mender-connect ("
+ mender_dist_packages_versions["mender-connect"]
+ ")"
in result.stdout
)
assert (
"Setting up mender-connect ("
+ mender_dist_packages_versions["mender-connect"]
+ ")"
in result.stdout
)
# Check mender-connect files
setup_tester_ssh_connection.run("test -x /usr/bin/mender-connect")
setup_tester_ssh_connection.run("test -f /etc/mender/mender-connect.conf")
setup_tester_ssh_connection.run(
"test -f /lib/systemd/system/mender-connect.service"
)
# Check mender-configure version
if mender_connect_version == "master":
# For master it will print the short git hash. We can obtain this from the deb
# package version, which is something like: "0.0~git20191022.dade697-1"
m = re.match(
r"[0-9]+\.[0-9]+\.[0-9]+~git[0-9]+\.([a-z0-9]+)-1",
mender_dist_packages_versions["mender-connect"],
)
assert m is not None
else:
result = setup_tester_ssh_connection.run("mender-connect version")
assert mender_connect_version in result.stdout
def test_mender_monitor(
self, setup_tester_ssh_connection, mender_dist_packages_versions
):
# Upload
upload_deb_package(
setup_tester_ssh_connection,
mender_dist_packages_versions["mender-monitor"],
"mender-monitor",
"all",
)
# Install the lmdb-utils
result = setup_tester_ssh_connection.run(
"sudo DEBIAN_FRONTEND=noninteractive apt-get install -f -y " + "lmdb-utils"
)
assert result.exited == 0
# Install
result = setup_tester_ssh_connection.run(
"sudo DEBIAN_FRONTEND=noninteractive dpkg -i "
+ package_filename(
mender_dist_packages_versions["mender-monitor"],
"mender-monitor",
"all",
)
)
assert (
"Unpacking mender-monitor ("
+ mender_dist_packages_versions["mender-monitor"]
+ ")"
in result.stdout
)
assert (
"Setting up mender-monitor ("
+ mender_dist_packages_versions["mender-monitor"]
+ ")"
in result.stdout
)
# Check mender-monitor files
setup_tester_ssh_connection.run(
"test -x /usr/share/mender-monitor/mender-monitord"
)
setup_tester_ssh_connection.run("test -x /etc/mender-monitor/monitor.d/log.sh")
def test_install_configure_start(self, setup_tester_ssh_connection, mender_dist_packages_versions, mender_version):
result = setup_tester_ssh_connection.run('uname -a')
assert "raspberrypi" in result.stdout
upload_deb_package(setup_tester_ssh_connection, mender_dist_packages_versions["mender-client"])
result = setup_tester_ssh_connection.run('sudo DEBIAN_FRONTEND=noninteractive dpkg -i ' + package_filename(mender_dist_packages_versions["mender-client"]))
assert "Unpacking mender-client (" + mender_dist_packages_versions["mender-client"] + ")" in result.stdout
assert "Setting up mender-client (" + mender_dist_packages_versions["mender-client"] + ")" in result.stdout
self.check_mender_client_version(setup_tester_ssh_connection, mender_version, mender_dist_packages_versions["mender-client"])
self.check_installed_files(setup_tester_ssh_connection)
# Default setup expects ServerURL hosted.mender.io
result = setup_tester_ssh_connection.run('cat /etc/mender/mender.conf')
assert '"ServerURL": "https://hosted.mender.io"' in result.stdout
self.check_systemd_start_full_cycle(setup_tester_ssh_connection)
def test_mender_configure(
self, setup_tester_ssh_connection, mender_dist_packages_versions
):
# Upload
upload_deb_package(
setup_tester_ssh_connection,
mender_dist_packages_versions["mender-configure"],
"mender-configure",
"all",
)
# Install
result = setup_tester_ssh_connection.run(
"sudo DEBIAN_FRONTEND=noninteractive dpkg -i "
+ package_filename(
mender_dist_packages_versions["mender-configure"],
"mender-configure",
"all",
)
)
assert (
"Unpacking mender-configure ("
+ mender_dist_packages_versions["mender-configure"]
+ ")"
in result.stdout
)
assert (
"Setting up mender-configure ("
+ mender_dist_packages_versions["mender-configure"]
+ ")"
in result.stdout
)
# Check mender-configure files
setup_tester_ssh_connection.run(
"test -x /usr/share/mender/modules/v3/mender-configure"
)
setup_tester_ssh_connection.run(
"test -x /usr/share/mender/inventory/mender-inventory-mender-configure"
)
def test_mender_client_dev(self, setup_tester_ssh_connection,
mender_dist_packages_versions):
# Upload
upload_deb_package(
setup_tester_ssh_connection,
mender_dist_packages_versions["mender-client"],
"mender-client",
)
upload_deb_package(
setup_tester_ssh_connection,
mender_dist_packages_versions["mender-client"],
"mender-client-dev",
package_arch="all",
)
# Install
result = setup_tester_ssh_connection.run(
"sudo DEBIAN_FRONTEND=noninteractive dpkg -i " + package_filename(
mender_dist_packages_versions["mender-client"],
"mender-client",
) + " " + package_filename(
mender_dist_packages_versions["mender-client"],
"mender-client-dev",
package_arch="all",
))
assert ("Unpacking mender-client-dev (" +
mender_dist_packages_versions["mender-client"] + ")"
in result.stdout)
assert ("Setting up mender-client-dev (" +
mender_dist_packages_versions["mender-client"] + ")"
in result.stdout)
# Check mender-client-dev files
setup_tester_ssh_connection.run(
"test -f /usr/share/dbus-1/interfaces/io.mender.Authentication1.xml"
)
